11 best wiring an extension cord
Wiring an extension cord is a straightforward task that allows you to extend the reach of electrical outlets and power devices in various locations. Here are the basic steps to wire an extension cord safely:
Materials and Tools Needed:
- Extension Cord: You can purchase a pre-made extension cord or make your own by following these steps.
- Wire Cutters: For cutting and stripping wires.
- Wire Strippers: Used to strip the insulation off the ends of the wires.
- Electrical Tape: For insulating wire connections.
- Plug and Receptacle: Depending on your project, you may need a plug at one end and a receptacle at the other.
Steps to Wire an Extension Cord:
Choose the Appropriate Wire: Make sure to select a wire gauge that matches the power requirements of your devices. Thicker wires (lower gauge numbers) can carry more current. Check the manufacturer's guidelines for your specific application.
Cut the Cord: Measure and cut the desired length of cord, ensuring that it will reach from the power source to the intended device.
Strip the Wires: Use wire strippers to remove about 1/2 inch (12 mm) of the outer insulation from both ends of the cut cord, exposing the inner wires.
Identify Wires: Inside the cord, you will typically find three wires:
- Hot Wire (Black or Red): This carries the electrical current from the source to the device.
- Neutral Wire (White): This completes the circuit and carries the current back to the source.
- Ground Wire (Green or Bare Copper): This is for safety and should always be connected to the ground terminal.
Connect the Wires: Attach the wires to the plug and receptacle as follows:
Plug:
- Connect the black (hot) wire to the brass-colored terminal screw.
- Connect the white (neutral) wire to the silver-colored terminal screw.
- Connect the green (ground) wire to the green terminal screw.
Receptacle:
- Follow the same color-coding as for the plug. Connect the black wire to the brass terminal screw, the white wire to the silver terminal screw, and the green wire to the green terminal screw.
Secure the Connections: Tighten the terminal screws securely to ensure a good electrical connection.Double-check that no bare wire is exposed outside the terminal connections.
Insulate the Connections: Wrap each terminal connection with electrical tape to prevent any exposed wires and reduce the risk of short circuits.
Assemble the Plug and Receptacle: Attach the plug and receptacle to the cord ends, following the manufacturer's instructions. This typically involves snapping or screwing the components together.
Test the Extension Cord: Plug the cord into an outlet and test it with your devices to ensure it functions correctly.
Safety Precautions: Always use your extension cord in accordance with local electrical codes and regulations. Never overload it with too many devices or exceed its rated capacity.
By following these steps, you can safely wire an extension cord for your specific needs. Always prioritize safety and make sure your extension cord is in good condition before use.
Below you can find our editor's choice of the best wiring an extension cord on the marketProduct description
Convenient and High Quality Geesatis Lamp Cord Accessories--Guaranteed!
Highlight Feature:
Made of solid PVC plastic for external insulation material and copper for wire core, having a good ductility, low consumption, and stable to use.
Nice for floor lamp, desk lamp, energy saving lamp, LED lamp and other all household lamps, a great tool to replace worn or damaged wires.
2-prong compatible, polarized extension cord, lamp extension cord with on-off switch.
Excellent service, superior quality, fast delivery. We do make best effort to provide customers 100% satisfaction.
Product Specification:
Prong: 2
Maximum of 50 W
Total Length: 180 cm / 6 Foot
Switch and Tail Distance: 90 cm / 3 Foot
Maximum Wire Diameter: 5.5 mm
Temperature resistance: 105 ℃
Color: White
Weight: 221 G
Material: Plastic and Copper
Package Content:
3 PCS x Lamp Extension Cord
We have strict selection of materials and highly demanding production process.
We try our best to make the details of the products and keep perfect for the package during the delivery process,ensure that the package received by the customer is not damaged and the number of specifications is clear.
Warranty: Amazon 30-Day Money Withdraw Guarantee!
- Nice for floor lamp, desk lamp, energy saving lamp, LED lamp and other all household lamps, a great tool to replace worn or damaged wires.
- Made of solid PVC plastic for external insulation material and copper for wire core, having a good ductility, low consumption, and stable to use.
- 2-prong compatible, polarized extension cord, lamp extension cord with on-off switch.
- Total Length: 180 cm / 6 Feet. Maximum Wire Diameter: 5.5 mm. Temperature resistance: 105 ℃.
- Please do not use the bulbs exceeding 50 W.
Product description
Royal Designs Clear Gold lamp repair wire, spt-2 Replacement lamp cable, 12-feet long. Polarized plugs UL listed ensure consistency of your installation. Clear Silver lamp cord blends in with your home or office decor. The vinyl jacket helps to resist abrasion and prolonged exposure to the ENVIRONMENT.
Specification:
- Length: 12 feet
- Function: Simple to replace old cord, rewire antique lamps.
- Outer casing material: Plastic
- Inner material: Copper
- Length: 1.8 m/ 5.9 feet
- Color: Clear Gold
Features:
- LAMP CORD WITH PLUG: 12-Foot Clear Gold Color Lamp Cord, easily accessible to any power outlet.
- MATERIAL: This electric cord external part is made of PVC plastic and the inside wire is made of copper.
- UL LISTED LAMP KIT: SPT-2 Lamp Repair Wire. Polarized UL plugs ensure consistency for your installation. Vinyl jacket resists moisture, abrasion and prolonged exposure to sun
- EXTENSION CORD: The length of the lamp cord is 12 feet, which is convenient for the extension lamp to be placed away from the power source, All cords are tipped and stripped with free wire ends for convenient wiring
User questions & answers
Question: | Do you have longer ones available, like 15-foot long? And with on/off switch |
Answer: | No, we don't have one available with an On/Off switch |
Question: | Can a switch be easily added to this |
Answer: | I am not sure. But there are ones with switches for sale already attached. |
Product description
Delivery Items:
> 12 Feet Pig-tail AC Cord 18AWG: 1pcs
> Connector for wiring: 1pcs
Product Characters:
This AC cord is open end wiring, just have a 3 prong AC plug and one end, and the other end is 3 stripped off wire,
ideal to replace the power cord for power tools, hair dryer, electronic DIY etc, anywhere where you need a AC cord.
Commercial grade power cable, high quality, high safety.
AC Cord Specification:
> Power Rating: 1200 Watt Max.@120VAC
> Working Current: 10 Amps Max.
> Cable Length:12 Feet
> Working Voltage: 120VAC ( 100-300VAC Max).
> Plug type: 3 Prong
> Product Life: 10 years
> Working Temperature: -40 ~ +105 Degrees
> RoHS compliant, without lead / mercury. No UV, No IR Radiation.
- AMERICAN STANDAR - 18AWG American wire gauge with NEMA 5-15P plug, suitable all 3 Prong socket, open end wiring, 12 foot long, 3 Wire Black, White and Green,
- Suitable for electric appliance, for repairing, replacement or DIY
- EASY FOR WIRING- Included a connector for wiring, easy and fast for wiring, save labor cost,
- REINFORCED PRONG- the reinforced prong offering you a strong plug, avoid bending or damage.
- DURABLE – Improved design on the cable SR and cable for long last strength, working current up to 10 Amps, 1200watts loading maximum at 120VAC
User questions & answers
Question: | Can i use this to wire a pentair optiflo pool pump |
Answer: | Dear Customer, This 18AWG AC cord with pigtail, the working current can not over 10 amp, The maimum power will be 1200 watt at 120V ac, If your pool pump working current below 10A that will be ok to use this power cable, Do not over rating use the AC cable, |
Question: | What is the outside diameter of the cable |
Answer: | Dear Customer, Thank you inquiry our 18AWG AC Cord UL listed, The outside diameter of the cable is 0.29inch ( 7.3mm ), |
Question: | Is this cord stiff? Or, soft and flexible |
Answer: | Dear Customer, Thank you inquiry our replacement power cord 18 gauge 12 foot long, This cord is flexible, just like a normal power cord as you have using on the Washing machine, power tool or others electrical applicance, Thanks, Enersystec Electric Co.,Ltd |
Product description
The ClearMax 18-inch extension power cable splitter is the ideal solution for adding some length to your current electronic device cords.
Allows You To:
Extend the distance your devices can be from the outlet
Extend 4 devices with one cable
Plug those big bulky power adapters into the extender / splitter cable, instead of power strip outlets, giving you more space to get the full use of your strip!
Compatible with:
Computers
Monitors
Scanners
Printers
Power transformers
Other devices that use the 3-pin, male-to-female shroud power connector
The female connector plugs directly into your current device power cable and the male connector plugs into a standard 3 Prong Outlet (Type B).
Specifications:
Length: 1.5 Feet (1.5')
Cord: 16AWG
UL Approved
One and a half foot extension cable
Three prong cable plug
Fully molded design for maximum durability and long life
Color: Black
- Strong inside and out; Save a few extra bucks from buying a new splitter every time it gets damaged or destroyed with the ClearMax 4 way splitter durably built to last through the years; Designed with reinforced copper wires and waterproof blades, you can be assured of this product's safety, quality and durability for a long time without having to worry about wear and tear issues
- All four one and one four all; The cluttering of wires is not just an unpleasant sight, but can also be dangerous for people walking around especially if there are kids in the household; Avoid the untidiness with the ClearMax octopus plug that helps organize and reduce the number of wires without losing energy efficiency
- Carefully designed to be safe and practical; Features of the product include; moisture proof, abrasion resistant, weather proof
- Your all around product; Works great for computers, monitors, scanners, printers, and power transformers with 3 pin male to female shroud; Works well for home and office use
- Product summary; 18 inches long, 16 AWG, UL approved, meets all US and international safety standards
User questions & answers
Question: | is this good for hooking up tv, game system, receiver, etc |
Answer: | My Clearmax cords are rated at 13 amps. I wouldn't advise teaming a receiver with other electronics, they potentially draw a lot of power...make sure you don't overload the extension cord. |
Question: | Can these be used outdoor |
Answer: | That should be your decision, but I bought them for that purpose and currently use one for connecting multiple outdoor extension cords. I plan on using them for outdoor Christmas lighting later in the year. As I said, you decide, but if you use an extension cord outside, you should be able to use these as well. |
Question: | Three outlet or four outlet? Picture shows four, description says three |
Answer: | It's a three prong plug type. It's a package three of the 3 Prong 1-to-4 Power Cord Splitter Cable - Power Extension Cord - Cable Strip Outlet Saver - 16AWG - UL Approved - 18" Inches (3 Pack | Black) |
Question: | Is this safe with a 12 outlet surge protector? Will this void any warranties with anyones Surge Protector |
Answer: | It depends how many amps you will pull through the surge protector and what it is rated for. |
Product features
Premium Quality
Moisture & Sunlight Exposure Resistant Premium Material & Reinforced Quality, Built With Molded Water Resistant Blades.
Compatible
Works Great With Computers, Monitors, Scanners, Printers, Power Transformers And Any Other Devices That Uses The 3-Pin Male-To-Female Shroud Power Connector.
Two Outlets
Design Allows For Extended Outlets on Power Strips & Wall Outlets, Efficiently Save Space & Keep Your Work Space Neat.
Product description
The 0777.CP Weatherproof Extension Cord Protector seals electrical connections and stops them from pulling apart. For everyone who uses extension cords outdoors and around water, at home or at work. Water and electricity don’t mix, so don’t take any chances when working outdoors. Contracting, cleaning, setting up events and parties: the 0777.CP keeps yours connections sealed from dust and storm. Powerful jaws lock the cords together so the power stays on. Molded from Lexan Polycarbonate it seals cords up to ½” diameter. Perfect for: - Hardware: power tools, outdoor light & water features, gardening tools, pressure cleaners - Electrical: extension cord, power tools, gardening tools, welders - Outdoor: RV, camping, generators, lights and more!
- Fits standard and heavy-duty extension cords
- Field-proven patented cord seal that adjusts to 12 gauge cords (1/2” / Ø12mm)
- Easy opening and closing
- Heavy duty commercial grade impact and UV resistant plastic - trade tough!
- Ingress protected to NEMA 3X (IP55), Impact resistant to IK09
User questions & answers
Question: | Will this fit an outdoor 3 prong extension cord |
Answer: | This will fit up to 12 gauge cords (1/2” / Ø12mm). |
Question: | Can you fit a generic household relocatable power tap/outlet strips 3 prong chord into it? Need an outdoor power supply for my slot car track |
Answer: | I did a search on "household relocatable power tap/outlet strips 3 prong cord" in amazon. My answer would be yes, you can plug a male surge protector plug and the female plug of an extension cord inside of this cord protector. |
Question: | what are the internal dimenions, will it hold 2 large plugs hooked together. 5"L x 4 1/2" W x 4" D |
Answer: | The internal dimensions are: 5.5" L, 2.25" D, 2" H |
Question: | will this fit a 30 or 50 amp rv plug |
Answer: | It is hard to tell since the molds of the plugs and receptacles are different from one manufacturer to another. Also, the cord protector accommodates wire gauge up to 1/2" (12 AWG). Typically 30A or 50A plug are on thicker wire due to the amperage. In any case the inner dimensions are: 2" H x 2.5" W. |
Product description
The extension cord gives you a little extra reach in your office or conference room. The 51954 features a child safety tamper guard and is perfect for indoor office use.
- Power more: Easily convert one outlet into 3 outlets to plug in more electronics at one, convenient location
- Longer reach: 12 foot extension cord is perfect for your desk lamp, portable fan, laptop, phone charger, vacuum cleaner, alarm clock and other household electronics that need a little extra length
- SAFE: Tamper guard safety outlet covers twist to close when outlets are Not in use to protect against electrical shock; UL Listed; Rated for a maximum of 125VAC, 13A, 1625Watt
- Indoor rated: for use in dry locations, including your home, office, dorm room, kitchen, living room and more.Jacket Material: PVC. Maximum Amperage (amps): 13
- Trusted brand: GE is a leader in extension cords and surge protectors
- Number of power outlets: 3
User questions & answers
Question: | Do you need an adapter to attach on a three pronged plug |
Answer: | YES IT WORKS WITH MY KINDLE 7 AND 6 HD. I would imagine it would work with 8 also. |
Question: | Is this cord 12' overall or are both extensions 12', making it a total of 24' from end-to-end |
Answer: | Dear Mahesh P., Thank you for your question. iVanky aux cable supports all headphones with standard 3.5mm ports. Besides, we provide lifetime warranty for your purchase. Hence if you are not satisfied with the cable, we'll take responsibility for any potential replacement or return. If there are any further questions, please feel free to contact us [email protected] iVanky Support |
Question: | What gauge is this chord |
Answer: | Yep. It works seemlessly well with absolutely no cracking sounds or disruption in sound quality. Jack pin sits well with apple lightening adapter. Works perfectly fine for me. |
Question: | Where was this extension cord made |
Answer: | Dear Rhonda Ison, Thanks for your question. Yes, our aux cable will work with connecting your devices. I checked that the Wave SoundTouch music system IV has a 3.5 mm stereo female input jack on the back. Just enjoy your purchase. Hope this will help. :) iVanky [email protected] |
Product features
Expanded Power
Each extension cord comes in a bright white finish and features 3 polarized outlets to provide power from a distance — perfect for creating a centralized hub for your electronics at your home, office, workshop or garage. The 2-prong plug features a flexible strain relief to reduce fraying and can be used in either a grounded or polarized outlet.
Tamper Guard Rotary Safety Covers
Prevent the incorrect use of your outlets with GE’s proprietary Tamper Guard rotary safety outlet covers. These user-friendly twist-to-close outlet covers securely shield open outlets to restrict their usage and prevent the insertion of foreign objects, eliminating potential electrical hazards to you and your family. The easy-to-use covers swivel into place to clearly designate which plugs are open for use.
Versatile Cord Length
Extend the reach of your favorite electronics with a power cord that’s built to last. This durable 16-gauge service cord is strong enough to last a lifetime but pliable enough to easily fully extend. The dynamic range of this extension cord makes it a must-have when you need power from a distance. Available in a variety of lengths (6/9/12/15ft.), there is sure to be the perfect size cord for all of your powering needs.
Functionality
With a maximum electrical rating of 125VAC/13A/1625W, this polarized extension cord is rated for indoor use in dry locations and is the perfect way to power your desk lamp, portable fan, laptop, phone charger, alarm clock and other household electronics that need a little extra length.
Product description
The Proline 7-Way Trailer Plug Cord is a commercial grade pure copper wire with copper spades in the connector head. This cable is designed for trailers with additional power needs such as electric brakes, interior lights or reversing indicators. It's ideal for RV travel trailers, caravans, food trucks and other towed vehicles. The overall cable length is 7ft and it is weatherproof and not affected by weather temperature variations.
- 7 Foot Premium trailer wire with 7 Way Copper Spade Connectors Plug
- Wires are coated with thick yet flexible insulation, offering kink-free flexibility
- Wire made from high end pure 100% copper Yellow, Green & Brown: 14 Gauge; Blue: 12 Gauge; White & Black: 10 Gauge
- 2 Year Proline Power WARRANTY and lifetime customer service.
User questions & answers
Question: | Is it made in China |
Answer: | YES IT IS MADE IN CHINA. |
Question: | Proline power 7-way plug inline trailer wiring harness cord, weatherproof and corrosion resistant 21 feet in length, loose end.- i need 26 feet |
Answer: | Sorry, we don’t offer a 26ft configuration. Dan Proline Support |
Question: | Is the plug to the cable molded to the cable as one unit |
Answer: | Hello, Yes, the plug is molded to the cable and can't be removed. Dan Proline Power Support. |
Question: | will this fit 2015 ford f |
Answer: | This goes on the trailer side, but the yellow plug will fit the outlet/socket on your 2015 F-250 |
Product description
Features:
1.Type: SAE TO SAE Extension Cord
2.Standard sae quick release connection - Fit for most of sae port.
3.Sae connector with DUST CAP- Protect the sae outlet from dust and raindrop when you don’t use it!
4.Sae 2 pin extension cord - Design to maintain the battery for vehicle, extender the battery charger.
5.Be made of SPT-2 16AWG/2C COPPER WIRE - Good electrical conductivity, Thickness AND Durable.
Product Information:
- SAE Plug
- Female Bullet Terminal: 4.57mm Rec, Nickel Plated Brass
- Male Bullet Terminal: 4.57mm Pin, Nickel Plated Brass
- SAE TO SAE Lead
- SPT-2 16AWG/2C
- Length: 12FT(144 Inch)
- Color: Red/Black
- Jacket:silica gel
Package Include: 1 x Sae Cord 16awg 2 Pin Connector Cable
SPARKING BRAND:
SPARKING is a professional manufacturer who sells various Electronic Accessories Auto Parts and mobile phone cables Accessories to USA, Euro, Asia and so on.
High quality promise. We insist in using pure copper as cable conductor and RoHS material to guarantee the user experience.
Keep developing new product to meet customer's increasing demand.
Any questions and problems, please feel free to contact us , we will answer and solve it asap to meet your 100% satisfactory with best service.
- SAE Connection Cable, DC Extension cord with Universal SAE connect.
- Cable Specification: SPT-2, 16AWG/2C, 12FT. Heavy duty, thickness, flexible and durable
- SAE bullet lead for trickle charger, maintain the batteries on motorcycles, lawnmowers, ATV, kayak, truck, sprayer.
- SAE Extension cable for battery charger and devices with sae connectors. Fits most battery chargers with SAE quick release connectors.
- If for any reasons you are not satisfied with our product or service, please contact us first, we will be responsible for any un-expectable issues.
User questions & answers
Question: | Work on a Battery Tender brand charger |
Answer: | Yes will work good |
Question: | Does this have the proper connection as extension? The photos differ. Exposed contact should go to black wire on one end and red on the other |
Answer: | I notice that on one side red is positive And black negative But,when come out from the fuse,seemed that reversed color and positive red connect to black. I’m kind confused with diagram! |
Question: | I plugged in my solar panel to my RV outlet, not directly to the battery. Well the gauge on the back of the panel started smoking |
Answer: | Assuming you meant to say the extension cable started smoking, that would indicate that the wire gauge is too small to handle the current. I recommend using WindyNation 10 Gauge 10 AWG One Pair 40 Feet Black + 40 Feet Red Solar Panel Extension Cable Wire MC4 Connector . |
Question: | Can a 16awg extension cord be connected to a 10 awg cord |
Answer: | It can but be careful you’re 16 gauge cord will not carry the same load as the 12 gauge you will need to reduce your fuse size for the 16 gauge |
Product features
SPARKING 12FT SAE Extension Cable - SAE to SAE Extension Cord, Sae 2Pin Bullet Quick Connect 16awg Heavy Duty Wire Harness with Waterproof Cap
Features:
- Type: SAE TO SAE Extension Cord.
- Standard sae quick release connection - Fit for most of sae port.]
- Sae connector with DUST CAP- Protect the sae outlet from dust and raindrop when you don’t use it!
- Sae 2 pin extension cord - design to maintain the battery for vehicle, extender the battery charger.
- Be made of 12AWG COPPER WIRE - Good electrical conductivity, Thickness AND Durable.
Package Include: 1 x Sae Cord 16awg 2 Pin Connector Cable
Product description
Product Description
100% Brand new and never been used.
Length: 50 feet
Rated Current: 50 Amp
Male Plug: NEMA 14-50P
Female Connector: NEMA 14-50R
Wire Gauge: STW 6/3 + 8/1
No Instruction Included
50 FEET LONG CABLE - Provide sufficient length needed to reach distant power outlets and sources. Constructed with pure copper wiring coated with a heavy duty flame retardant, heat resistant PVC sheath.
HIGH CONDUCTIVITY - Bendable extension cord adapter allows easy conversion from a standard 50 Amp male to 50 Amp female. It is available in STW 6AWG/3C+8AWG/1C wire sizes for higher conductivity.
ERGONOMICAL PLUG - Professional handle eliminates frustration for easy gripping, plugging, and unplugging. Comes equipped with an adjustable cord organizer and carrying strap handle that makes toting and storing simple after each use.
WEATHERPROOF DESIGN - PVC sheath and threaded locking ring feature creates a weatherproof connection ensuring further protection during outdoor use.
WIDE APPLICATION - Excellent use at campsites, electric car charging stations and other outdoor use, also for most RVs, campers, trailers, and vehicles.
Package Includes
1X RV Power Extension Cord
Just as pictures show
- 【50 Feet 50 Amp RV Extension Cord】Bendable extension cord adapter allows easy conversion from a standard 50 Amp male to 50 Amp female
- 【High Conductivity】Constructed with pure copper wiring coated with a heavy duty flame retardant, heat resistant PVC sheath. Wire Gauge: STW 6AWG / 3C+8AWG / 1C
- 【Weatherproof Protection】PVC sheath and threaded locking ring feature creates a weatherproof connection ensuring further protection during outdoor use
- 【Simple to Storage】Comes equipped with an adjustable cord organizer and carrying strap handle which makes toting and storing simple
- 【Easy-Grip Handle】 Professional handle for easy gripping, plugging, and unplugging
Product description
JACKY LED 20M 65.6Ft 22awg Extension Cable Wire Cord for Led Strips Single Colour 3528 5050
Specification:
Surface color: Red+Black
Size(approx.): 20 Meter/65.6Ft (L)
Application: Extension use for Single Color Led Strip 5050 and 3528. Extension Cable Line Single Color 20M for LED strip 5050 3528 cord 2 pin
Feature:
- 100% brand new
- Easy to use and convenient
- Easy cut,Welding,jointed with connectors are up to you
- Use for low votage single colour led strip,light bulb,lamp
- Cord coverred with high quality plastic shell
Package Includes:
1x 20M/65.6ft 22 awg Extension Cable
Attention:
1.To avoid risk of fire make sure your bulb do not exceed the recommended wattage indicated on your light fixture.
2.Please allow little color difference due to the screen and light brightness.
3.The size above is measured by hand, please allow 0.5-2cm/0.2-0.8inch difference.
4.JACKYLED Products are sold and shipped by JackyBrand. If you purchase a product from another seller without our logo JACKYLED, please request a refund as it is a counterfeit JACKYLED product. JackyBrand is the only Authorized Dealer of JACKYLED products.
5.No instruction included.
- Premium quality: Made of tin plated copper and high quality UL PVC, features flame retardant, anti-aging, acid and alkali resistance and dampproof.
- Wide application: Connection extension cable linkable for 3528/5050 single color led strip light 22 AWG. For Electronic, electrical appliance and equipment, transformer, lamps,CB Radios and motor led wire connection and other low voltage products connection.
- EASY&GREAT TO USE: It's easy to strip and cut.Wire specification features high conductivity, low resistance and softness, which can be twisted and extended it freely as you like.
- Safety: The PVC bush is very even, which could prevent electric leakage better than others. The plastic cover and copper core have a high melting point, which won’t melt easily.
Product features
Choose Life , Choose JACKYLED !
Features:
Being made of high purity oxygen-free copper with tin-plated, features high conductivity, lower resistance, and anti-aging.
Upgraded with high-quality PVC, features flame retardant, high-pressure resistance, excellent performance in anticorrosive.
Max voltage is up to 300V, the optimum working temperature range is -30 degrees Celsius to 80 degrees Celsius protect your devices the most.
Underwent thousand times rigorous testing, Long lifespan, and stability.
Specification:
Length: 20m/ 65.6ft
Wire Gauge: 22AWG
Max Voltage: 300V
Color: Black and Red
Package Included :
1x 22awg Wire
1x Thanks card
Product description
The GCP1E is an ac port plug, power inlet, and waterproof electrical outlet with a 6-foot integrated outdoor extension cord that offers optimal flexibility and ease of installation. It works with any extension cord and requires no cable modifications or hand wiring. Its sleek, ultra-low-profile design not only works seamlessly on any application but includes a pressure-fit cap for a watertight seal. And it makes onboard battery charging ports, engine block heaters, or outdoor electrical outlets more accessible than ever before - giving you endless possibilities. Rated at 15-amps, 125-volts (14AWG), designed for use with all types of extension cords with Type-B plugs, and UL approved. Ideal for car, boat, marine, truck, trailer, pickup, RV, industrial and electrical applications.
- AC Port Plug - A 125-volt power inlet socket with an integrated 6-foot outdoor extension cord for a car, boat, marine, truck, trailer, pickup, RV, industrial and electrical applications
- Waterproof - A rugged, waterproof ac electrical power inlet receptacle featuring a pressure fit rubberized cover rated for outdoor use and protects against the elements
- Peak Performance - Rated at 15-amps with heavy-duty 14 AWG copper wiring to maximum power flow and full-sized AC port prongs for maximum conductivity
- Plug-N-Play - A simple flush mount flanged power inlet that's easy to install, requiring zero cable modification or hand wiring, and mounts into a 2-inch hole size
- Multiple Uses - An outdoor extension cord designed for various uses, including onboard battery chargers, bumpers for engine block heaters, outdoor electrical outlets, and more
User questions & answers
Question: | Does this plug come in white |
Answer: | No |
Question: | Does it come with the 2" hole cutter that the picture shows |
Answer: | Does not come with the 2” hole saw. |
Question: | Dose it draw power both ways |
Answer: | This device is essentially an extension cord that is mounted. In most situations, electrical devices are designed to transport electricity from the male end to the female end, or to the item being powered (load). The male end on this device is inside the weather resistant flap. To use this device, it would typically be mounted on the outside of a vehicle with the female end of the cord running to the inside. Then, you can plug in your battery maintainer to the female end and permanently mount the maintainer under the hood and connect the maintainer to the battery using the DC wires. Then, when you want to power up the maintainer, simply plug the female end of an extension cord into the male end of this device (under the flap), and the maintainer will get power. Of course, the male end of the extension cord that you use will have to be plugged into a powered outlet somewhere... probably in your garage. |
Question: | Looking to use this on a detached garage with vinyl siding on the outside and 3/4 ply wood on the inside. In between it has standard rolled insulation |
Answer: | While this will work, you are not doing yourself a favor by not using the correct approach. The wire is not suitable for long term inside the wall use. The right way is to mount a water resistant box on the outside, using a proper box made for siding, and then using Romeo/BX capable to run to the inside of the structure, and a suitable termination inside. The box on the outside will prevent the siding from being pinned in position, as siding expands and contracts with heat/cold. When going through this process, consider a locking recepticle . |
Latest Reviews
View all
Stainless Steel Metal Raw Materials
- Updated: 26.03.2023
- Read reviews

Mel Bay Banjos
- Updated: 21.05.2023
- Read reviews

Monitor For Imacs
- Updated: 19.03.2023
- Read reviews

Trash Bag For Small Trash Can
- Updated: 05.05.2023
- Read reviews

American Tourister American Tourister Lock Keys
- Updated: 18.06.2023
- Read reviews