14 best attic steps

Product description

WERNER LADDER AA1510 AA1510 LADDER Aluminum ATTIC 250LB is rated for 250 pound load capacity; lightweight and easy to open and close with the included assist pole; installs into small openings for access to untapped storage space; ideal for hallways, closets and other tight spaces; non-marring feet; telescoping design gives you quick, hassle-free access to small attic openings anywhere or anytime; hardware for door included (door not included).

• Lightweight and easy to open and close
• Includes assist pole
• Installs into small openings
• Non-marring feet
• Ideal for hallways, closets and other tight spaces
• Floor to Ceiling Height Range

User questions & answers

Question:	When are you bringing back the telescopic ladder? This “compact” style doesn’t work if you do t have a lot of empty space inside your attic
Answer:	I've purchased a 32 oz and a gallon. I think I reviewed the 32oz.
Question:	Is it attached to the door
Answer:	The Alba website shows no parabens in the ingredients for this product. I believe the ingredients list on this Amazon listing is a misprint and should be corrected. If you’re in doubt, check the website or your local store (I think Target carries it) to verify the ingredients. Worst case, if you order this and it shows parabens on the product, just send it back and request a refund because it’s not the product you ordered if you ordered something without parabens.
Question:	what ladder is suitable for vertical position
Answer:	Smells horrid, like acrid oil paint. I can't use it and I usually like natural lotions, but the scent of this is unbearably strong and pungent.
Question:	I have a 30x30 rough opening and a 8' ceiling. Will this ladder work? Also, what is the quality of the ladder
Answer:	It smells but I wouldn’t say it’s a scent. Just lotion smell. It’s not strong but if you are sensitive it might bother you

Product description

3.8m/12.5Ft Telescopic Ladder Extendable Folding 13 Steps Multipurpose Ladder Extension



Fantastic product, light, easy to use, great for use in home, outside home.

If you were ever to find a great ladder, it would be this one. its ingenious and lightweight aluminium design fits nicely into the boot of an Aston Martin (alternatively, in your bedroom closet).

Lightweight aluminium design

150kg load-bearing capacity

Rubber-tipped feet

Storage straps



Specification

Rungs:13 Rungs

Closed Length: 86cm

Vertical Length: 3.8m/12.5Ft

Step spacing: 30cm

Weight:Approx.11 kg(24lbs)

Max Load 150kg/330lb

Package size: 88cm x 50cm x 9cm



Package

1 x Telescopic Ladder

• Lightweight, Compact and Portable. Easy to store or carry.
• Safe with plastic finger protection spacers and non-slip bottom caps;
• For a maximum load of 330 lbs (150 Kg), multi-function ;
• Constructed with aluminum alloy, sturdy and slip-resisted, EN131 certification.
• Extend to 12.5ft/3.8m, Locking Feature, non-slip;

Product description

Our Everest series aluminum attic ladder has a working load capability of 350Lbs. This fits 10' - 12' ceiling heights, has a rough opening of 22.5" x 63", adjustable shoes, deep steps, and an insulated door.

From the Manufacturer

Our Everest series AL258aluminum attic ladder has a working load capability of 350 pounds. This fits 10 - 12 feet ceiling heights, has a rough opening of 22.5 x 63 inches, adjustable shoes, deep steps, and an insulated door. It is the perfect choice for making that space above the rafters in your garage useful. Its heavy duty hinges and adjustable feet will give you long life and function.

• ROUGH OPENING DIMENSIONS: 22.5-by-63-inches
• CEILING HEIGHT: Fits 10-foot to 12-foot high ceilings; Hook And Pole For Easy Door Opening
• STURDY AND SAFE: Able to hold up to 350 pounds, and its heavy-duty hinges, adjustable feet and an insulated door provide long life and improved functionality
• SUPERIOR STABILITY: Step depth is 3.375 inches, metal hinges limit side to side motion
• QUICK INSTALLATION: The installation kit contains the exclusive EZ hang strap system, plywood shims, 8-7/8’’ roofing nails, aluminum feet, door and instructions for a quick and easy installation
• MEETS OR EXCEEDS STANDARDS: The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration

User questions & answers

Question:	Height from floor to finished ceiling is 9'7". Will this attic ladder fit or so I need a different configuration
Answer:	I am looking for a “handyman “ that might be able to install it. I needed it, so I bought it.
Question:	My ceiling is 12'6" to the bottom of the joists. Is there any way to make this work
Answer:	Yes, if I were you I would run 1x4 down both sides. 1x4 are usually 3/4 thick anyway.
Question:	Is there a model which works for a vertical wall into the attic
Answer:	21.5 is designed for the 22 wide, my opening was 26 and the 25.5 worked perfect
Question:	Does it really take 2 people to open this ladder
Answer:	one that is more than the 10'---home depot may have one

Product features

Step 1 Measure the rough opening

THE JOURNEY TO FIND THE CORRECT ATTIC LADDER STARTS HERE

Measure the space for rough opening where you intend to install your attic ladder. This attic ladder will fit in an opening that is 22-1/2- inches wide and 63-inches long. The actual clearance once installed will be slightly smaller.

Step 2 measure the floor to ceiling height

If the floor to ceiling height where you intend to install your attic ladder is between 10 and 12 feet, this is the correct attic ladder for your space.

Step 3 Measure the area where the attic ladder will be opened to ensure proper swing space

You will need at least 90-inches to ensure that the attic ladder has enough space during opening.

Step 4 Measure the landing space for the attic ladder

Landing space may vary depending on your ceiling height. If the ceiling is 12 feet, you will need 84-inches of landing space. This is the maximum amount of space needed.

Product description

The Louisville big boy S305P 350 pound capacity wood folding access ladder. Easily allows you to store large holiday decorations in attics or storage areas with the oversized opening. Every step is reinforced for extra strength. It opens and closes smoothly and easily. Big boy come fully assembled in box and includes easy hang strap to make installation a snap.

From the Manufacturer

Louisville Ladder L305P, rated for 350 pound load capacity. Pre-assembled, contains installation kit and instructions. Adjustable spring tension and extra corner bracing keeps stairway frame square. Metal hinges riveted on both sides of rail joints limit side motion. Reinforced steps, wire rod under each step for strength. EZ-Hang strap system acts as temporary supports for quick and easy installation. Has extra-large 30" x 60" frame size for roomier attic access. Meets or exceeds requirements of American National Standards Institute. Installation kit includes EZ-hang strap system, 36" pull cord, 4 support straps, 4" x 6" plywood shim (for final squaring only), 8 - 7/8" roofing nails, door, and installation instructions. This big boy attic ladder is one of many top quality items in our attic ladders department.

• HEAVY DUTY: 350 pound capacity including user and tool weight
• SAFETY AND COMFORT: Extra deep steps that are easy to climb, which also reduce foot pain and fatigue
• QUICK AND EASY INSTALATION: Exclusive E-Z hang strap system
• STRENGTH: Wire rod under each step
• DURABLE: Wood construction offers lasting strength and support

User questions & answers

Question:	What is the length of B in the last picture (showing the folding mechanism
Answer:	it is not fire rated.
Question:	What is the stair width? I have big feet and need a wide stair
Answer:	Should fit...on center means center to center. So 24" on center is 22½" in between.
Question:	Can this ladder be used for both residential and commercial
Answer:	Yes, but it's a tight fit. The wooden frame is 21 3/4" wide, so while it will fit in a 22" joist bay, there's little tolerance for adjustment. Your joists had better be parallel in both directions. Mine were a little out of whack in both directions, so I had to make tapered shims to compensate. One hint: check for squareness of the assembly by closing the stairs and seeing if the door cover (presumed to be a rectangle) lines up.
Question:	This version is currently about $20 cheaper than the 7' - 8'9"" model. Is there any reason this one can't be cut down shorter than the listed
Answer:	Rather than risking your safety and welfare on an old unit, buy a new one. The ladder wood dries out with heat and old age, the hardware gets bent and loose. Probably one spring broke so they removed the other. How does it stay closed with no springs? My hardware and spring arms were getting very loose and the steps would crunch when you stepped on them from being dry. Weigh the risk $86 and free shipping for a new unit. At least that's what it was when I bought mine. Every time I use it now I ask myself why didn't I do this 15 years ago
Question:	Is this ladder fire rated for garage installation? This is requirement in California
Answer:	I think it might work but your first step would be close to the floor. Might be better to find a model mad for 8'-10'. I used this one in my garage which has 10'-6" ceiling, it is an awesome ladder.
Question:	My studs are @22.5" on center, is this too small for the ladder? Or does the frame meant as 22.5" on center, rather than 24" (I think) on center
Answer:	It should work. My ceiling is 10 feet and I had to cut over 2 feet off from it might be just a little steep
Question:	Will the L22 4P fit in a 22" opening
Answer:	Yes
Question:	I bought a house with this style of attic ladder, but the springs are missing. Does anyone know the length and diameter of the springs
Answer:	I have this installed in my garage with an 11 ft ceiling.. It comes with a expandable pole to reach the loop to pull the door down. Once that is done, being 5ft 9 inches tall, I use a 3 step stool to stand on to fold out the ladder to the floor. I also use the step stool to stand on when folding it back up. I have had it installed for almost a year now and have always opened and closed it by myself.

Product features

Step 1 Measure the rough opening

THE JOURNEY TO FIND THE CORRECT ATTIC LADDER STARTS HERE

Measure the space for rough opening where you intend to install your attic ladder. This attic ladder will fit in an opening that is 30- inches wide and 60-inches long. The actual clearance once installed will be slightly smaller.

Step 2 measure the floor to ceiling height

If the floor to ceiling height where you intend to install your attic ladder is between 10 and 12 feet, this is the correct attic ladder for your space.

Step 3 Measure the area where the attic ladder will be opened to ensure proper swing space

You will need at least 79-inches to ensure that the attic ladder has enough space during opening.

Step 4 Measure the landing space for the attic ladder

Landing space may vary depending on your ceiling height. If the ceiling is 10 feet, you will need 70-inches of landing space. This is the maximum amount of space needed.

Product description

Feature:

●Anodised aluminium finish - clean to touch

●Foldable design, convenient to use and easy to carry around

●Great helper for both indoor household use and outdoor activities

●It has rubber feet fitted to protect internal flooring and also give maximum safety

●Safe and compact----black anti-slip rubber sleeve on the bottom of ladder step and stable locking



Specification:

Number of Ladder Step: 13

Step Interval: About 30cm

Net Weight: About 11kg

Max Load Capacity: 150kg

Package Size: 88cm x 50cm x 9cm

Dimensions (when fully opened): 380cm x 48cm x 8.8cm

Slight deviation may occur during measurement, please take care and thanks for your understanding

• High Quality - Aluminium construction makes this telescoping ladder much safer, lighter and with wide threads for more comfortable to climb.
• Space Saving - Foldable design, easy to store in limited space. Folded Size: 85cm x 48cm x 9cm; (when fully opened: 380cm x 48cm x 8.8cm). Max Load Capacity: 150kg/ 330 lb; Extends to 12.5 Feet / 3.8m.
• Multi-Purpose - 3.8m fully length allow users to reach high places, can be Attic Ladder, Home Ladder, Office Ladder. Perfect for indoor housework and outdoor activities.
• Safe - It has anti-slip rubber feet and rubber sleeve on every step to give maximum safety. With the grip handle, user can carry the ladder with only one hand. Come with EN131 certification, use it with confidence.
• Package include: One ladder (without Hook or Stand-Off Stabilizer). If you need Stand-Off Stabilizer or Ladder Hook, you should buy them separately. However, please know that stabilizer or hook is not necessary when you use the ladder to reach your loft.

User questions & answers

Question:	is the hatch included
Answer:	No. My ladder did not land exactly where I wanted it to. I made a Velcro strap to tie two rungs together so it would always end at the right spot.
Question:	Attaches to attic opening
Answer:	You will need to build your own door,frame,and trim.There are no instructions for this,except a lousy picture
Question:	Attic mounting brackets? Nothing in description (except picture) references this
Answer:	No it does not, the ladder comes with it's own frame. that can be folded. You will need to have sufficient structural (ex. double 2x wood) support to bolt the ladder to.
Question:	Does this ladder attach to the roof access opening so it can be used as a permanent attic access ladder
Answer:	I believe you will need to enlarge the opening because the steps do not collapse to less than 24".

Product description

Attic Stairs Insulation Cover 138x64x28 cm for Pull Down Stair, Zipper Design Fireproof Attic Door Insulation Stairway Cover Stair Ladder Opening Attic Tent for Isolate the Outdoor Cold & Warm Air,Attic Door Insulation Stairway Cover Stair Ladder Opening Attic Tent with Zipper for Easy to Access



Features:

- Home Garden Fireproof Attic Stairs Insulation Cover, Attic Stairs Insulation Cover for Pull Down Stair, Attic Tent 25x54x11 inch, Extra Thick Fireproof Attic Stairway Insulator, Easy Installation

- Material: Fireproof attic stairway Insulation cover was made of bubble aluminum foil, double-layer protection.

- Function: Better isolation effect, durable, and long lasting. Fireproof, waterproof and dustproof.

- Thickened: Super thick Insulation cover, isolate the outdoor cold and warm air, double bubble reflective radiant barrier.

- With Zipper : With zipper allows for easy entrance and exit to the attic when climbing up and down your pull down attic stairs.

- Foldable: This insulator covers the full entrance to the attic door while allowing space for the stairs to fold and fit securely beneath, leaving the insulation hidden-in the attic.

- Easy Installation: Zipper access and simple installation. To install, simply place the attic door insulation cover in your attic door opening and staple it to the door frame.

- Energy Saving Fireproof Attic Stairs Door Ladder Insulator Easy Installation Pull Down Tent with Zipper



Specifications:

Item Name: Attic Stairs Insulation Cover, Fireproof Attic Door Insulation Cover, Attic Stairway Insulation Cover, Attic Ladder Insulation Cover Attic Tent

Material: bubble aluminum foil

Color: Silver

Size(L x W x H):about 138x64x28cm/25x54x11inch



Package includes:

1 or 2 pcs x Attic Stairway Insulation Cover

• 【Attic Stairway Insulation Cover for Pull Down Stairs 】- Fits openings up to 138x64x28 cm/25x54x11 inch. This insulator covers the full entrance to the attic door while allowing space for the stairs to fold and fit securely beneath, leaving the insulation hidden-in the attic.
• 【Attic Stairs Insulation Cover, Fireproof Attic Stairs Door Ladder Insulation Cover】- 1. Our Fireproof Attic Stairway Insulation Cover is made of high-quality bubble aluminum foil material with insulation inside to provide you with all-year-round energy savings insulating performance. 2.Thicked Insulation cover, isolate the outdoor cold and warm air, double bubble reflective radiant barrier. Double-layer protection. Better isolation effect, durable and long lasting.
• 【Attic Stairs Door Ladder Insulator Pull Down Tent with Zipper】- This Attic Cover with zipper allows for easy entrance and exit to the attic when climbing up and down your pull down attic stairs. When you are trying to enter the attic, just open the zippers and fold the cover over.
• 【Easy Installation Attic Ladder Insulation Cover】- You can install it in minutes. Zipper access and simple installation fits for folding attic stairs/ knee wall doors/ attic scuttle holes etc . (Warm Notice: Measure the opening to determine the required size of a cover kit. Carefully measure the inside and outside dimensions as well as the height requirements of your attic stairs before purchased.)
• 【Package Includes】- 1 or 2 pcs x Attic Stairway Insulation Cover；This Attic stairs insulation cover is designed for optimal energy efficiency. Our insulation cover works year around, on hot summers and cold winters, helps to keep your valuable heated and cooled air in your living space where you want it. Also can helps to keep your house clean. Bubble Aluminum Foil Fireproof Attic Stairs Insulation Cover, isolate the outdoor cold and warm air, saving money on the bill.

Product description

The FAKRO LWN Basic is a wooden, builder series, three-section folding attic ladder. It is ANSI certified at 250 lb weight load capacity. The particleboard hatch door has a paintable surface to match any ceiling colour. The hatch is supported by springs that run parallel to the door, keeping the entrance to the attic clear of hardware. Suitable for occasional use in an area where an insulated attic ladder is not needed. Fully assembled and ready to install.

• Rough opening 22 1/2"x54"
• Fits ceiling heights 7ft 10in to 10ft 1in
• Particleboard hatch door with string, spring loaded opening. Anti-slip, 13 1/4-inch wide treads
• Red metal handrail and plastic ladder ends available separately
• ANSI certified at 250 lb weight load capacity. One year warranty

User questions & answers

Question:	What is the width and length of the actual door that comes down
Answer:	I would not know if this filter will fit your unit. It is about 5” thick. I was happy to find them on Amazon and they were approved by the company that installed our Trane A/C. last year. They may need changing in the summer and fall. Ours has held up well. We will be getting a full year out of ours. Hope this helps! LS
Question:	Is the tread width the same on 22.5" wide and 30" wide ladders
Answer:	May need to replace twice a year. Ours was checked and we can get another six months out of ours. The filters are about 5” thick. This is a great buy! Good luck! LS

Product description

Parameter:

Brand: INTSUPERMAI

Type: Wall-mounted

Color: Black

Frame Size: 27.6 x 27.6in/70 x 70cm

Material: Al-Mg Alloy

Step Size: 19 x 5.5 in.

Amount of Steps: 12

Weight Capacity: 660 lb

Vertical height: 3m/9.8ft

Total length: about 3.4m/11.15ft

Angle to the ground: 60°



Package content: 022005

1 x INTSUPERMAI Black Attic Loft Ladder

1 x Tie Rod

2 x Safety Handrail



NOTE before ordering and installation:

Please confirm the size and type before ordering carefully. Wall-mounted type and NOT pull down from ceiling.

Color is black. When the ladder is extended, the sides are black. The steps and 2 safety handrails are white.

When installing the ladder, first remove the steps, then install the frame with expansion screws, and finally install the steps.

This attic ladder with comes with 2 safety handrails. Type of these 2 handrails is random.

• 【Wall-mounted Type】--This Loft Wall Attic Ladder is Wall Mounted Type. It CAN NOT be installed on the ceiling and pulled down from the ceiling and it should be installed on vertical wall or a vertical plane.
• 【With 12 Steps】Maximum vertical height stretched out is 3m/9.8ft. This is the maximum safe height of the aluminum-magnesium structure. If you need a height below 3m/9.8ft, you can remove the steps to reduce the maximum height.
• 【Heavy Loading Capacity】Max. loading capacity: 660 lb. But this does not mean that this loft wall ladder can stand on several people at a time. For your safety, you should go up one by one.
• 【Al-Mg Alloy Material】The loft wall ladder stairs is made of aluminum-magnesium alloy material, and the surface adopts electrostatic spraying technology, which is stable in quality, durable, anti-corrosion and anti-aging. Fashionable and beautiful, it can be matched with various styles of decoration and furniture. The structure is more stable and light than carbon steel material.
• 【Application】It can be used when the ladder is pulled down. It is suitable for the attic, roof top, company, warehouse, hospital, school, etc. It is ideal for installation and modification of the house. This attic ladder can be suitable for indoor and outdoor home decoration.

User questions & answers

Question:	It this product made in china
Answer:	There are 2 filters in the package.
Question:	Can I buy 3 extra steps
Answer:	3 months... less if your inside air is dirty and/or if you’re working on fixing up the inside of property
Question:	How do you pull ladder down & up
Answer:	Hi, Sorry I cannot help you. I have 2 very large a/c units to cool 4200 sq.ft. My technician told me a yr ago, it would be cheaper for me to buy these direct instead of through them. He was 100% correct! His co. was charging me double what they are on Amazon. And I use my Hilton Honors points towards my purchases here, so cost is a fraction of what I used to pay.
Question:	When fully extended, how far away from the wall is the bottom step
Answer:	they do not. There is a miss print of information. ti weighs like any other filter packed in a box this size.

• made of galvanized steel,ladder hinges easy to install，tie rod installed at ladder side top
• hinge size is divided into different sizes; Small size is suitable for the total width of the ladder 12cm-13cm, Large size is suitable for the total width of the ladder 15cm-16cm（as the picture shows；Measuring the top of the ladder）
• attic ladder hinges provide as safe and stable ladder
• spreader brace adds stability and prevents damage
• apply to home ladder/photography folding ladder/herringbone ladder etc

User questions & answers

Question:	Where is this hinge being shipped from? Will it still be delivered between 10/15/2020 anf
Answer:	it's 26" long not depth

• Weight Capacity: 500lb
• Frame Size :27.6*27.6 in.
• Step Size :19*5.5 in.
• Amount of Steps: 12

User questions & answers

Question:	do i need to order a bigger size to have a comfortable angle of 65 degrees at the bottom? if the vertical height is 7' do i need 8' ladder
Answer:	Thank you for reaching out- the steps are 7 inches from step to step!
Question:	How long is the ladder? My height is 8' 4" (100"). The top step will be about 8" below the floor
Answer:	Let me give you a DETAILED description. First off, I don't have the 3-step structure. I have the 4-step one. So, therefore, I cannot tell you what the dimensions are for the 3-step structure shown. So, let's go with what I have. EACH step is 16" wide - i.e. from left to right; it is 7" wide- i.e. from heel to toe if you were stepping up on a landing as if you were climbing up (or down) these stairs. The steps are about 3/4" thick. With the 4-step structure, I've had to TIE a piece of fabric around the columns that support the 3rd and 4th steps because those steps were too wobbly just left alone after the instructions were finished. Then I did the same thing to the columns that support the 2nd and 3rd steps (landings). After THAT, the structure was firm enough to support my cat running up and down the stairs. But, you DO have to tie up the columns; otherwise this structure is just too wobbly. I hope this information helps.
Question:	My ceiling height is 10'4". Any suggestions
Answer:	This will depend on how high the wall is. It’s designed to be used on small SUVs, cars and trucks with a bumper height of about 27-29”. The goal for us was a relatively small rise on each step from the ground to the car. If the wall is higher than 30” the angle will be more vertical and the steps won’t be big enough to step on to go up or down.
Question:	Is all mounting hardware included with the product
Answer:	I use for my dogs to get in and out of my car. If the bed has a ledge I think it would work.

Product features

TECHTONGDA Attic Extension Loft Ladder Stairs Wall Mounted Type Not Pull Down from Ceiling

"Customer first, quality first" is our constant management principle.

It is our relentless pursuit to help you create home business and generate revenue through our machines.

Through our efforts and excellent quality machines, it is a great thing to make more people's lives better.That's what we've been doing.

We adopt three-color brand pattern, red, green and blue.

Red-----represents our passion for customers;

Green-----represents the quality of our products;

Blue------represents our patience with our customers.

Parameter

• Color : Black
• Frame Size: 27.6*27.6 in.
• Material: Al-Mg alloy
• Step Size: 19*5.5 in.
• Amount of Steps: 12
• Weight Capacity: 500-600 lb

Item include (comfirm size and color)

• TECHTONGDA Attic Extension Loft Ladder Stairs* 1 set
• Wooden package *1
• Tie rod*1
• Any further needs, such as color and size, please contact with us freely.

Product description

3-Step Safety Escape Ladder

All new homes require emergency exits from the basement. The tubular handrails with anti-slip tape allow for a quick, safe, and easy escape out of your window well covers safely in the event of an emergency.

Quality Welded Steel Tube

High Load Capacity

User-Oriented Design

Ease of Installation

key Features

High-Quality Steel

The egress window escape ladder is made from high-quality steel tubing, designed and fabricated to the highest standards to last just as long as your covers do.

300lbs Load Capacity

The high strength construction of the egress well ladder meets load requirements of 300 lbs.

Easy Grip Rungs

These tubular handrails are easy to grasp, and covered with non-slip strips to provide a sure-footed way to get in and out of your window well covers safely.

Easy to Install

It's easy to install the ladder. Hook the ladder over the lip of your well on the side of the window opening. Attach it with included screws for additional stability.

Conform to IBC Code

According to IFC and IBC, steps distance of a ladder can't exceed 18". The rungs of an egress ladder must be 12" wide or greater. The product completely meets IFC and IBC building codes.

For Easy Wells

The 3-step ladder is designed for all types of easy egress wells. It can also be used as a monkey bar.

Specifications

Raw Material: Wrought steel

Color: Silver

Size: 41*15.25in

Load Capacity: 300lbs

Package Content

1 X Ladder

2 X Expansion Screws

1 X Open-ended Spanner

• 【QUALITY STEEL TUBING】 - Height: 41in; Width: 15.25in; Color: Silver; Rung to rung distance: 9in; For wells 45" deep or less. The egress ladder is made from high-quality steel tubing that is high-strength and long-lasting. It's welded together, featuring a rugged and minimalist structure.
• 【HIGH LOAD CAPACITY】 - The basement window well ladder is constructed of tubing with a weight capacity of 300 lbs.
• 【USER-ORIENTED DESIGN】 - Tubular handrails of the emergency window ladder are easy to grasp. They're covered with non-slip strips to provide you with a sure-footed way to get in and out of your window well covers safely.
• 【EASE OF INSTALLATION】 - The fire window ladder is easy to install. FYI: Parts and tools are all included in the package.
• 【WIDE APPLICATION】 - The 3-step ladder is designed for easy egress wells. Apart from that, it can be used as a monkey bar.

Product features

High-Quality Steel

The egress window escape ladder is made from high-quality steel tubing, designed and fabricated to the highest standards to last just as long as your covers do.

300lbs Load Capacity

The high strength construction of the egress well ladder meets load requirements of 300 lbs.

Easy Grip Rungs

These tubular handrails are easy to grasp, and covered with non-slip strips to provide a sure-footed way to get in and out of your window well covers safely.

Easy to Install

It's easy to install the ladder. Hook the ladder over the lip of your well on the side of the window opening. Attach it with included screws for additional stability.

Conform to IBC Code

According to IFC and IBC, steps distance of a ladder can't exceed 18". The rungs of an egress ladder must be 12" wide or greater. The product completely meets IFC and IBC building codes.

For Easy Wells

The 4-step ladder is designed for all types of easy egress wells. It can also be used as a monkey bar.

4-Step Safety Escape Ladder

All new homes require emergency exits from the basement. The tubular handrails with anti-slip tape allow for a quick, safe, and easy escape out of your window well covers safely in the event of an emergency.

Product description

Explanation

• Free home delivery logistics 20-30
• 10-16 days for expedited transportation logistics
• Extra thick wooden box packaging
• 98%+ shipped after assembly
• Product description + usage video + installation video
• Product size can be customized
• Pedal size 300*140mm/hole width 23.62in
• Pedal size 400*140mm/hole width 27.55in
• Pedal size 470*140mm/hole width 31.49in
• The greater the width of the opening, the greater the width of the pedal

Product Manual

• Material/Ti-Mg alloy
• Maximum load 660 lbs / 300kg
• To purchase this product, you must first determine the dimensions of the attic opening Figure 1 (D/L*C/Width), and then determine the vertical distance from the hole to the floor (Figure 2/D).
• This product supports multiple colors: orange, white, blue, black. We send black lines according to the standard. If you need another 3 colors, you can contact us through the Amazon website to determine the color after payment.
• The ladder's pedals are movable, and other heights can also be modified during installation
•  In order to ensure that the ladder purchased by each customer matches the actual size, we will check with you within 12 hours of receiving the relevant production parameters, such as color / vertical height / hatch size / roof cross section thickness Therefore, please do not ignore your Amazon mailbox
• We provide a pair of titanium-magnesium alloy telescopic rods to every customer who purchases this invisible staircase in the attic
  
   
  • Customized range of opening size

1. Hole length 800mm-1400mm/31.49inch-55.11inch
2. Hole width 600mm-1000mm/23.62inch-39.37inch
3. The vertical height of the opening is 1700mm-4000mm/5.57ft-13.12ft
4. Thickness of hole cross section 100mm-400mm/3.93inch-15.74inch

• A new revolution in home improvement design, with a retractable folding method, only gently pull down when in use, perfect invisibility when not in use.The ladder is made of titanium-magnesium alloy, which can reduce the weight of its own, and its load-bearing capacity can reach 660LB/330KG?Titanium-magnesium alloy has the characteristics of wear resistance, rust prevention and anti-aging, and is more durable than ordinary steel.Solemnly, please read all about this product before purchasing.
• How to choose the right ladder size? figure 1: *D-opening length / *C-opening width figure 2: *D-vertical height from the attic opening to the ground. If your opening is not a standard size, please choose a larger fixed size for payment We support free modification of ladder parameters to make the ladder suitable for your installation location, The scope of the description/modification cannot exceed the ordered ladder -hole length/hole width/hole height-
• In order to adapt to different loft sizes, we provide a choice of custom sizes. The hole width range supported by this product is 600-1000mm/23.62-39.37inch, the hole length range is 700-1400mm/27.55-55.11inch, and the hole vertical height range is 5.57-13.12 feet. You can measure these parameters to confirm the demand. 15.74-17.71inch * The widened pedal of 5.5inch stairs size is not only suitable for adults, but also suitable for children.
• We will use wooden box + foam packaging to ensure that the product will not be damaged by logistics.This product supports air logistics expedited transportation services, we will arrange according to the weight of the package, the transportation time is 8-14 days/DHL or 10-16 days/UPS, the free shipping time for this product is 22-32 days?Ladders with opening sizes exceeding W/2.62ft*L/3.93ft and custom-made ladders do not support expedited transportation services
• In order to make the ladder you purchased more suitable, we will need to know more questions about the thickness of the cross section of the attic floor, whether the distance from the vertical wall of the hole is less than 5cm/2inch. If it is less than this value, we need special treatment for the ladder.We will contact you within Amazon's email address within 12 hours of your payment to reconfirm the size of the ladder you purchased. Please do not ignore your email information.

User questions & answers

Question:	Can you attach this to a wall to be able to get up to a loft? I could not attach to an attic door
Answer:	21-3/16" X 45-11/16"
Question:	Can the hole size be larger than 2.95 Ft. x 3.93 ft
Answer:	Yes that is correct.
Question:	can I buy just the handrail
Answer:	It shows in the description, MERV 8. Thanks.
Question:	For cold or hot weather protection do you have an option to insulate the door
Answer:	I bought BAYFTAH26M replacement filter for my Trane Unit (heat pump/air) fits perfectly, last a long time. well pleased with my purchase. I bought the two pak in May, 2014 for $67.07the size is 21X26X5

Product description

Product parameters

1. Vertical height 1.9 m = Vertical height 6.23ft
2. Vertical height 2.2 m= Vertical height 7.21ft
3. Vertical height 2.4 m = Vertical height 7.87ft
4. Vertical height 2.6 m = Vertical height 8.53ft
5. Vertical height 2.8 m = Vertical height 9.18ft
6. Vertical height 3 m = Vertical height 9.84ft
7. Vertical height 3.2 m = Vertical height 10.49ft
8. Vertical height 3.4 m= Vertical height 11.15ft
9. Vertical height 3.7 m = Vertical height 12.13ft
10. Vertical height 3.9 m = Vertical height 12.79ft
11. custom made =If you can't find what you need in the size we have already given, you can choose this option to pay, then contact us via Amazon.com mailbox, we will make according to your needs, the customizable ladder vertical height does not exceed 13.12ft /400cm

• The wall fixing frame of the ladder is 60CM*70CM/70CM*70CM=1.96ft*2.29ft/2.29ft*2.29
• Name: Wall-mounted telescopic  staircase
•  Safety load: 300kg/660lb
• Weight: 40kg-50kg/88lb-110lb
• Pedal size: 15.74in*5.51in/40cm*14cm
• This product is made of titanium-magnesium alloy material, which effectively reduces the weight of the ladder itself, increases the safety factor of the ladder, maximizes the service life of the ladder, and has the characteristics of rust prevention and wear resistance.
• We will perform multiple tests before shipment to ensure that every ladder issued is safe and usable.
• The product supports the selected colors of white, black, blue, orange. You can tell us the color you need through Amazon email after payment. If you don't have color selection, we will send you a black ladder by default.
• In order to make your purchase more perfect, we will contact you after you pay, reconfirm the specifications you need, and talk to you about some general installation issues.

• This product is a wall-mounted telescopic ladder. You can install it directly on the vertical wall next to the ceiling opening. 60CM*70CM/70CM*70CM=1.96ft*2.29ft/2.29ft*2.29 is the size of the ladder wall fixing frame.
• The ladder adopts a simplified design, which can be used simply by fixing it on the vertical wall surface. The anti-slip mat is used on the foot of the stair to improve the safety of use. When used, it is pulled down - when it is not used, it shrinks upwards without occupying any space.This is the best choice for environments where some spaces are narrow and it is not convenient to install large stairs.
• This product is made of titanium-magnesium alloy material, which effectively reduces the weight of the ladder itself, increases the safety factor of the ladder, maximizes the service life of the ladder, and has the characteristics of rust prevention and wear resistance.For this ladder, we will give a pair of alloy telescopic handrails for free
• If you want to customize the size you need, you only need to measure the vertical height of the installation location to the ground, we can customize it according to the height, the maximum custom height does not exceed 13.12ft/400cm?This product can be installed/re-used many times. The telescopic pedal of the ladder is connected by screws. If you need to adjust the height, you can use the wrench tool to modify it. This is very convenient.
• This product has been certified by the National Quality and Safety Monitoring Agency. We will provide 25-40 days of free air transportation for this product. We will conduct actual testing on the product before shipment to ensure the safety/utility of the ladder. We will receive it. Shipment within 48 hours after payment, we will contact you again to confirm the height/color information of the ladder before delivery, to ensure that you get the most suitable products.

User questions & answers

Question:	I have a floor to attic floor measurment of 2.8m. if i get a ladder that is 3.2m or 3.7m, will this decrease the steep angle of the steps
Answer:	Hello, very happy to receive your online inquiry, we will answer it for you again The distance between the pedals of this ladder is fixed. We recommend that you purchase according to your actual needs. After payment, we will contact you again to verify your actual parameters. We can simply modify the ladder according to your actual parameters. , Please don't ignore your Amazon mail Now in order to meet the needs of most customers, if you have a handrail requirement, please inform after purchase, we will give you an additional pair of retractable handrails, of course this is not included by default with the ladder
Question:	Are the rails on the mounting bracket welded or bolted on and can it be installed without rails
Answer:	Hello, we will answer this question in detail for you again. This ladder installation frame has been made before shipment. The square frame of the ladder is already provided with mounting holes. You only need to punch holes at the correct height on the vertical wall. The expansion screws attached to the ladder can be used after being fixed, which is very convenient. The ladder can be adapted to various vertical walls, thank you
Question:	Attic pull down ladder hinge" Can it be mounted to a pulldown door so it's concealed? Or is that a different product
Answer:	Hello, sir, if you need an invisible drop-down ladder that can be installed at the hole, you can visit this Amazon URL link: https://www.amazon.com/Retractable-Ladder-Folding-pulldown-5ft-11ft/dp/B07TZX6SDZ /ref=sr_1_130?keywords=attic+ladder&qid=1562772570&s=gateway&sr=8-130 This ladder is not only available in multiple sizes, but we also offer custom hole sizes and heights to give you a more suitable ladder.
Question:	I'm still confused, ground flood to loft floor is 8 feet. Which size should I order, to include the comfortable slant of the ladder
Answer:	Hello Sir, you need an 8-foot ladder. You can purchase this size (Size Name: Vertical height 2.6 m). After payment, please contact us via Amazon.com and tell us the color and ladder height you need. We will Create and send the most suitable ladder according to your needs

Product description

This Louisville elite series aluminum attic ladder has a working load capability of 375 pounds. This aluminum attic ladder fits ceiling heights of 7-Foot 8-inches to 10-foot 3-inches and has a Rough opening of 22.5-Inches x 54-inches. The elite AA2210 attic ladder features slip resistant cross-tread steps, adjustable shoes, an advanced cylinder design, and an ergonomic T-handle. The Louisville AA2210 aluminum attic ladder meets or exceeds the safety standards set by ansi.

From the Manufacturer

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model AA2210 number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily. It utilizes a gas cylinder instead of a traditional spring mechanism. The gas cylinders provide more clearance space allowing easy transport of large boxes. The gas cylinders allow the smooth opening and closing of the door, reducing the force needed with traditional spring operated attic doors. The gas cylinder design also eliminates destructive door slamming. This Louisville attic ladder features 3-1/4 inch deep steps to increase stability. The adjustable shoes on the Louisville attic ladder make it easy to fit with any type of flooring.

• ROUGH OPENING DIMENSIONS: 22-1/2 x 54-inches
• CEILING HEIGHT: Fits 7-foot 8-inches to 10-foot 3-inches ceilings. Step Depth : 3.25 inches.Rail Size : 3.125 inch
• STURDY AND SAFE: Able to hold up to 375 pounds, with reinforced, grooved steps to provide maximum traction. Heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb
• CUSTOMIZABLE ELEGANCE: Elegant and smooth finish with adjustable spring tension; Ceiling Height Maximum (ft): 10.25

User questions & answers

Question:	Do you have installation available for this item? Atticc ladder
Answer:	Yes it does
Question:	I have an attic ladder I want replaced that the outside frame measures 24 3/4" x 53 1/8". Would this ladder be the right size with shims
Answer:	It's made from China.
Question:	I have 22" wide, so mine is not as 'standard' as I thought. Neither would work then for me
Answer:	Yeah, it can be unfolded into straight 16feet telescoping ladder.
Question:	I ned a ladder that is art least 11 feet, which one should I get
Answer:	The height depends on angle of A shape, but most height is 250cm, about 8.3ft

Product features

Step 1 Measure the rough opening must be 54" by 22.5"

THE JOURNEY TO FIND THE CORRECT ATTIC LADDER STARTS HERE

TOOLS NEEDED:

Step ladder, hammer, Phillips screw driver, Framing square, drill with 1/8" bit, 2 ea 7/16" wrenches, 2 ea 1" x 4" x 32" boards, Wood shims, Tape Measure

Step 2 measure the floor to ceiling height

If the floor to ceiling height where you intend to install your attic ladder is between 7'8" and 10'3" this is the correct attic ladder for your space.

Step 3 Measure the area where the attic ladder will be opened to ensure proper swing space

You will need at least 74-inches to ensure that the attic ladder has enough space during opening.

Step 4 Measure the landing space for the attic ladder

Landing space may vary depending on your ceiling height. If the ceiling is 10 feet 3-Inches, you will need 67-inches of landing space. This is the maximum amount of space needed.

Louisville Ladder Elite Aluminum Attic Ladder 375 Pound Capacity

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily.This Louisville attic ladder features 3-1/4 inch deep steps to increase stability.