13 best qualcraft ladder hook

Product description

Qualcraft 2481 Ladder Hook with Wheel

The Qual-Craft ladder hook comes complete with a convenient wheel to roll the ladder along the roof without damaging shingles. Sporting a tough, steel construction for added durability, the ladder hook adjusts to fit between the top two ladder rungs. The ladder hook fits single or extension ladders in wood, fiberglass, or aluminum in both round and D rung styles. Two hooks must be used per ladder.

From the Manufacturer

The Qual-Craft ladder hook comes complete with a convenient wheel to roll the ladder along the roof without damaging shingles. Sporting a tough, steel construction for added durability, the ladder hook adjusts to fit between the top two ladder rungs. The ladder hook fits single or extension ladders in wood, fiberglass, or aluminum in both round and D rung styles. Two hooks must be used per ladder.

• Provides Ideal Method Of Securing The Top Of A Ladder To A Rooftop, When Used With A Paired Ladder Hook
• Both Hooks Fit Over The Top 2 Rungs Of The Ladder & Hook Over The Roof Edge
• Wing Nuts Of Both Hooks Are Tightened Holding The Ladder Firmly In Place
• Designed To Fit Single Or Extension Ladders
• Made From Powder Coated Steel For Superior Durability & Strength.
• Durable and convenient ladder hook with wheel
• Adjusts to fit between the top two ladder rungs

User questions & answers

Question:	With detention ladders, what keeps the back one from extenuating
Answer:	The lock on the ladder.....
Question:	Why does this one have the blade edge to shingles and not the other side as others have it
Answer:	This ladder hook is meant to have the wheel feature used to roll the ladder up over the ridge and then the ladder is turned over to hook on the ridge.
Question:	What are the dimensions of the hook portion? Need to go over a thick parapet
Answer:	6.75 inch opening. From flat portion total curve is 9.75 inches.
Question:	I just came across this item. we do work off of roofs quite a bit. What are the wheels used for, or rather, what is the purpose of the wheels
Answer:	The wheels roll the ladder up the roof and then you turn it over to hook it to the top edge. That keeps your ladder from tearing up the roof shingles. This works well especially since this model is so heavy because it is made out of steel instead of aluminum.

Product features

Qualcraft Safety Ladder Hook

The Guardian Fall Protection Ladder Hook provides an ideal method of securing the top of a ladder to a rooftop. When used with a paired Ladder Hook, both hooks fit over the top two rungs of the ladder and hook over the roof edge.

Then the wing nuts of both hooks are tightened, holding the ladder firmly in place. These hooks are designed to fit single or extension ladders, and are made from powder-coated steel for superior durability and strength.

Features

Ladder Hook Applications

Qualcraft Ladder Hook is specially designed to use in multiple industrial or residential construction jobs. It is generally used to fix the ladder to the roof shingles, allowing the personnel to work smoothly with precision.

Durable Construction

This red colored roof ladder hook is made from high-quality metal that makes it reliable to use in heavy-duty applications. This ladder hook can be used in pairs in order to secure the ladder to the rooftop.

Ladder Hook Wheel

This hook is accompanied with a wheel attached for smooth movement of the ladder. Thus, it can be easily fitted on different styles of ladders including D-style rungs or the round styled ladder rungs.

About Guardian Fall Protection

Privately owned and locally operated since its founding in 1993, Guardian has since been the top manufacturer and provider of safety products for America’s construction workers. Guardian is headquartered in Kent, WA, with offices and warehouses located throughout the United States. Supported by its hardworking employees and strong distributor partnerships, Guardian is constantly striving to enhance the safety and productivity of its customers.

Product description

Gtongoko Heavy Duty Garage Storage Utility Hooks,Wall Mounted Hooks for Tools,Bikes, Water Pipes, Ladders 6pack (3 sizes 6 pack)



Features:

High-quality material:

The heavy duty garage storage utility hooks are made of strong metal material that won’t bend.They are coated with anti rust coating,which can be used for a long time.



Advanced Security:

In order to protect your belongings and body from being scratched by the sharp end of the hook, we put a plastic cover on the tail of the wall hook to improve safety.



Application:

Wall mounted hooks are used for hanging and storing objects of different sizes and weights in garage and storage room.Your warehouse will be neat with them, and you will have more space for other things.



Size:

large size:8.07"L x 7.48" H

middle size:4.52"L x 5.7" H

small size:3.14"L x 5.11" H



Specifications：

Material:Iron

Color:Black



Package Including :

2 X large hooks

2 X middle hooks

2 X small hooks

12 X Screws

12 X Plastic Anchors

• Three sizes: 7.5 "x 8" x 2.7 "for large size, 5.7" x 4.5 "for medium size, 5.1" x 3.1 "x 2" for small size. There are six hooks in all，two hooks for each size, and 12 screws and 12 plastic anchors.
• Safe & high quality: Garage wall hook is made of high quality iron, and its surface is coated with black coating, which can prevent rust. The tail of the hook is wrapped with rubber material to improve the safety. The maximum weight of a large hook is 77 pounds, the medium hook is 55 pounds, and the small hook is 44 pounds.
• Easy to install: Make a mark on the wall where you want the garage storage utility hook to be fixed, then punch a hole in the mark, insert a plastic anchor into the hole, and finally fix the hook with metal screws.
• Multipurpose: You can hang different things, such as tools, bicycles, water pipes, ladders, etc., on the walls of garage, basement or utility room according to the different weight bearing of hooks of different sizes, which will make full use of your space.
• Our service: If you have any questions about the garage storage utility hooks you purchased, please contact us in time. We are willing to provide you with satisfactory service as soon as possible.

Product description

Qual-Craft Steel Red Ladder Hooks 1 pk

• For single or extension ladders in wood, fiber glass or aluminum
• Fits between top two rungs of ladder
• Place over roof ridge to prevent ladder from slipping
• Roller protects shingles when positioning
• Steel

Product description

MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements.

From the Manufacturer

The Qual-craft 2 rung, short body aluminum ladder jack is MIG welded and riveted construction for strength and durability. This high quality aluminum ladder jack will work on either the inside or the outside of the ladders face, and will accommodate up to an 18 inch wide plank, and is adjustable to fit round or D rung ladders. Qual-craft now offers 2 new accessories for the ladder jack scaffolding. The new accessories are a Ladder Jack Safety Rail holder and Safety Rail to complete the Ladder Jack Scaffolding System.

• Many uses, such as, painting siding, window repair, general repair. Takes two to use.
• For a super quick set-up and tear down, use Qual-Craft aluminum ladder jacks.
• These tough riveted and welded ladder jacks will work on the inside or outside ladder face.
• They should be fully decked using an 18" wide platform that comply with OSHA requirements
• Qual-Craft ladder jacks are adjustable to fit round or "D" rung ladders.

User questions & answers

Question:	I weigh about 290 lb. Is the loading capacity adequate
Answer:	I had myself and my wife on them approximately 340 lbs no problem
Question:	Is this for 1 or a pair
Answer:	It's for 1, I thought it was a pair as well, but it's not
Question:	are they sold by the pair
Answer:	I seem to recall that the pair I bought was around $100.......might try to use the "cotact me" info on the ladder jack folks and ask them. Comment on the product....18" wide deck accomodation is very nice.....others have a 14" deck slot. My heaviest use was painting my house 2 yrs ago.....good investment for me.
Question:	The description says to use a standard 18" wide platform, there are no platforms that size. Do they mean a 19" wide platform
Answer:	Setting the platform: Use clear straight-grained scaffold grade lumber. Planking should not be less than 2” x 10” nominal thickness. Always use two planks to fully deck the platform arms (18” minimum width).

Product features

Qualcraft 2-Rung Short Body Aluminum Ladder Jack

The Ladder Jack by Qualcraft can be installed over consecutive ladder rungs and used on either side of a ladder. It is one of the most durable equipment that is ideal for painting, siding, and repair applications.

This jack is easy to both install and remove. It can easily accommodate wide planks when used in combination with a paired Ladder Jack. This Qualcraft short body ladder jack can accommodate 2 personnel at once.

Features

Robust Design

Specifically designed to provide safe operation, this ladder jack has two rungs and can be fitted inside or outside the ladder’s face. It is strong enough to accommodate two persons at a time. The Qualcraft 2-rung ladder jack weighs 5 lbs. It can be fully decked using an 18 in. wide platform that complies with OSHA requirements

Durable Construction

This MIG welded 2-rung jack is made with the high-quality aluminum to offer reliable and strong performance throughout. High riveted construction ensures maximum user safety when in use. It is tough enough to withstand regular wear and tear.

Highly Functional

The short body jack can be easily fitted with round or the D rung ladders. This ladder jack can be installed inside or outside the ladder. It can be easily adjusted to fit around the D-rung ladders as per the requirement. The strong and enduring ladder jack can be used for many applications including painting, siding, repairing of walls and window repair work.

About Guardian Fall Protection

Privately owned and locally operated since its founding in 1993, Guardian has since been the top manufacturer and provider of safety products for America’s construction workers. Guardian is headquartered in Kent, WA, with offices and warehouses located throughout the United States. Supported by its hardworking employees and strong distributor partnerships, Guardian is constantly striving to enhance the safety and productivity of its customers.

Product description

Qualcraft 2470 Corner Buddy Aluminium Ladder Stabilizer

From the Manufacturer

The Qualcraft Corner Buddy, Ladder Stabilizer promotes utility and safety. The Corner Buddy is designed for use on multi-surfaces, corners, flat, round and multi-dimensional construction. You can use the corner buddy all around the house without having to be removed from a ladder. Connection and removal are very easy. 'The Corner Buddy' is powder-coated in safety yellow and comes with rubber bumpers for protection against the work surface. If your in the market for a ladder stabilizer their is no substitute to the Qual-craft Corner Buddy.

• For use on a corners, flat, round, or multi-dimensional construction surfaces
• Transport the ladder from job to job without having to remove from ladder.
• Gives easier access to gutters, downspouts and soffits.
• Yellow safety coating and rubber bumpers
• Add stability to your ladder and creates a safe working environment

User questions & answers

Question:	Where do I obtain replacement end caps for this? Just the little orange caps
Answer:	Lowe's and Home Depot carry replacement caps in their ladder department, they are the same as the caps on their ladder stand offs.
Question:	How wide is the opening, from cap to cap? Thank you
Answer:	28 3/4" inside measurement from cap to cap.
Question:	What is the standoff distance from a wall
Answer:	rough guess is 18 inches on the flat wall, about 12 inches on the corner.
Question:	Does this work on fiberglass ladders
Answer:	This answer applies to aluminum and fiberglass ladders. No it doesn't work. It does not bolt correctly to the ladder and the arms are too short for the ladder to clear the corner of the house.

Product description

Material: Steel. Color: Red. Assembled Height: 13 in. Assembled Length: 23 in. Weather Resistant. Adjustable. Accessory Type: Hooks. Height: 13 in. Assembled Width: 2 in. Brand: Qual-Craft.

• Assembled Height: 13 in.
• Assembled Length: 23 in.
• Assembled Width: 2 in.
• Accessory Type: Hooks
• Weather Resistant

Product description

Product Description Qualcraft 2481 Ladder Hook with Wheel Amazon.com The Qual-Craft ladder hook comes complete with a convenient wheel to roll the ladder along the roof without damaging shingles. Sporting a tough, steel construction for added durability, the ladder hook adjusts to fit between the top two ladder rungs. The ladder hook fits single or extension ladders in wood, fiberglass, or aluminum in both round and D rung styles. Two hooks must be used per ladder.

• Provides Ideal Method Of Securing The Top Of A Ladder To A Rooftop, When Used With A Paired Ladder Hook
• Both Hooks Fit Over The Top 2 Rungs Of The Ladder & Hook Over The Roof Edge Wing Nuts Of Both Hooks Are Tightened Holding The Ladder Firmly In Place
• Designed To Fit Single Or Extension Ladders Made From Powder Coated Steel For Superior Durability & Strength.
• Durable and convenient ladder hook with wheel
• Adjusts to fit between the top two ladder rungs

Product description

MIG welded and riveted construction for strength and durability. This high quality aluminum ladder jack will work on either the inside or outside of a ladder's face, and will accommodate up to an 18-Inch. wide plank, and is adjustable to fit round or D rung ladders. This is also a true 3 rung ladder jack because it attaches over 3 rungs.

• The Qualcraft Aluminum Ladder Jack will accommodate up to an 18-Inch wide plank
• The Aluminum Ladder Jack can be used inside or outside ladder face
• The Aluminum Ladder Jack is adjustable to fit round or D-rung ladders
• The Aluminum Ladder Jack has a capacity of 2 works plus 75-Pound between 2 ladders

User questions & answers

Question:	Hello. Would this item work for the multi foldable Werner ladders
Answer:	I think it should as long as the foldable ladder has the same distance between rungs as a regular ladder.
Question:	Will this work with Little Giant Ladders
Answer:	Yes
Question:	is this a pair or just one
Answer:	Each is sold individually
Question:	Is this a pair or just one
Answer:	It is just one.