10 best titan fan controllers

Product description

Allows user to select minimum fan idle speed between 25% & 60% of fan rating. Enables the user to activate/deactivate 'low temperature' safety feature. Temperature control range is 55Degree F to 95Degree F. 6 foot temperature probe is accurate to within 2Degree F. Plastic enclosure protects internal components from dust and moisture. 6 Amps/120 Volts/60 Hz. 3 year warranty.

• Power source type: Corded Electric
• Enables the user to activate/deactivate low temperature safety feature
• Temperature control range is 55°F to 95°F
• 3 year warranty.

User questions & answers

Question:	Does this work with a 6" Hurricane Fan
Answer:	Yes I do
Question:	will this work with the CAn Fan 8 inch
Answer:	It took me a bit to figure out. There’s two layers. The rubbery part needs to come off then you unclamp the two hard plastic pieces to put your phone in then stretch the rubbery cover back on.
Question:	Once the desired temperature is reached, does the fan turn off entirely or does it still run at a low fan speed
Answer:	I can see the Apple logo through the case. Love this case. Especially for the money
Question:	Once the desired temperature is reached, does the fan turn off or does it still runs at a low fan speed? I did not get a complete answer yet
Answer:	I don’t know but the glitter moves around in there pretty cool.

• DESIGN FOR VENT & GRILLE MOUNTING VENTILATION- Great for refrigerator vent & grille ventilation in your motorhome, camper van, camper truck, caravan or any cabinets.
• FLEXIBLE AND SMART SPEED CONTROL MODE- Auto Temperature Control/ 6-levels manual controller to adjust for particular needs
• ALL WEATHER ACCEPTABLE- IP 55 Waterproof &dustproof fan, perfect for outdoor use
• EASY INSTALLATION- Rack hook design for easy install on refrigerator vent
• FREE REPLACEMENT GUARANTEE: The best customer service! We guarantee free to offer a replacement of new fan regarding the shipping problem or any uncontrolled product defaults and situations. Please feel free to contact us. Do not hesitate to order and give it a try now.

User questions & answers

Question:	I just hooked up a 12v power source to the fan and still no life. Any suggestions
Answer:	If you are talking about the Hurricane Inline Fan 6 in 435 CFM, then yes it will work. The Hurricane Inline Fan 6 in 435 CFM runs off of 1 amp at 120 V and the Titan Controller Mercury 4 is capable of running a 6 amp fan at 120 V
Question:	Would this fan turn the correct way to be mounted on the RV roof to bow the hot air out of the roof vent
Answer:	The Answer is No.. I just spent all day with this thing and it simply makes a Humm.. Does not work with Can Max Fan Mixed Flow Inline Fan, 8-Inch 675 Unit.It will turn the Fan But it makes the Fan Humm. And when you let it cycle it cannot get the fan turning at Idle even if the Idle is set to a very high speed like on full! When it works its great but it is not reliable and the damage it is trying to cause by heating up the Fan and shortchanging it of voltage is not how you slow a Fan motor.. This is not Ready to be sold .. Please Redesigning this. Or Sell fans that work with it.. Again This unit will not work Correctly with the best fan on the market the Can Max Fan Mixed Flow Inline Fan, 8-Inch 675.
Question:	When on smart speed control (auto), where is the sensor that determines the temperature? Is it in the control unit, or in the fan assembly
Answer:	There are 3 different modes you can see the bottom knob is to be adjusted for the response you want. So it can do ither but best thing to do is look up a better picture of this controller and you will see it says idol that's the low speed but yeah it's awesome but be aware I went through 3 before I got one that worked as advertised, I just kept sending them back first one didn't work right out the box, second one was off by 10 degrees.
Question:	When operating in auto mode, will it show us what fan speed is at
Answer:	I have my fan set on the upper mode of the three modes: During the day it will modulate between idle and full speed to regulate temp, at night is the same but will shut down if the temp goes below the set point. Mode two runs the same but will not turn off at night. Mode three will turn it off during the both periods if low temp is reached. The instructions that come with it explain it simply.

Product features

IP 55 Waterproof fan

IP 55 Waterproof &dustproof fan, perfect for outdoor use

6 levels Timer Setting & Speed Controller

• Auto Temperature Control
• 20°C (68°F) auto turn off the fan
• 45°C (113°F) auto operate at maximum speed
• 6-levels manual controller to adjust for particular needs

Perfect for ventilation updating

Great for refrigerator vent fan in your motorhome, camper van, camper truck, caravan, and also be applied to ventilation fan in home theater cabinet

TTC-SC20(A) : 90mm

• Outline Dimension: 184 x92 x30mm
• Fan Dimension: 92 x 92 x 25 mm*2
• Rated Voltage: 12V DC
• Rated Current: 0.48 A
• Power Consumption: 5.76 W
• Rated Speed: 500~2600 RPM
• Airflow: 106 CFM
• Static Pressure: 0.12 Inch H₂O
• Noise Level: < 28 dBA

TTC-SC20(B) : 120mm

• Outline Dimension: 240 x 120x 30 mm
• Fan Dimension: 120 x 120 x 25 mm*2
• Rated Voltage: 12V DC
• Rated Current: 0.56 A
• Power Consumption: 6.72 W
• Rated Speed: 400~2000 RPM
• Airflow: 121.13 CFM
• Static Pressure: 0.12 Inch H₂O
• Noise Level: < 32.9 dBA

TTC-SC20(C) : 140mm

• Outline Dimension: 290 x 145 x 31 mm
• Fan Dimension: 140 x 140 x 25 mm*2
• Rated Voltage: 12V DC
• Rated Current: 0.8 A
• Power Consumption: 9.6 W
• Rated Speed: 500~1800 RPM
• Airflow: 178.86 CFM
• Static Pressure: 0.09 Inch H₂O
• Noise Level: < 28.8 dBA

SPEED CONTROLLER

• Outline Dimension: 85 x 37x 15.5mm
• Input Voltage: 12V DC
• Output Voltage: 7~13.8V DC
• Max Output Current: 1A
• Temperature Measuring: 20°C~ 45°C
• Speed Level Range: See Table

Product description

Top sale products in Germany! Popular DIY fan on updating ventilation



Great for refrigerator vent fan in camper van or ventilation cabinet.

TITAN multi-purpose rack mounting fan with speed controller



With functional rack mounting set, make you easily install on any places near the device you want to cool down and reinforce ventilation immediately.



Equipped two TITAN exclusive silent but strong airflow fan and speed controller which can switch auto and manual, you can both have a whisper operation experience and perfect cooling performance. Perfectly monitor silent operation and airflow performance by auto or manual speed control.



You do not need to design a DIY fan and speed controller to fit your all cooling requirements. This is the perfect cooling solution made for you. All of them we have prepared, experimented and mostly assembled. The only things you need to think is where to cool and easy install. There are also three sizes for you to choose: 90mm, 120mm, and 140mm. Let’s give it a try! Away from the hot air right now.



Application

-Refrigerator/ fridge ventilation cooling fan

-Car amplifier ventilation fan

-Teletphone trminal wall Cabinet cooling fan

-Wall cabinet mounted ventilation cooling fan

-Home server cabinet ventilation cooling fan

-Audio/Video ventilation cooling fan







- Got a question? Ask us now in the "Customer Questions & Answers" near the end of this page.



Click the 'Add to Cart' button in the upper right corner of screen before we're out of stock.

• WIDELY COOLING APPLICATION- Great for refrigerator vent fan in your camper van, camper truck, caravan, motorhome, and ventilation cabinet fan in home theater cabinet, audio cabinet, ventilation cabinet, network closet, etc.
• FLEXIBLE RACK MOUNT SET DESIGN - Accept to install on any places you want to enhance ventilation and cool down temperature for your application.
• POWERFUL SPEED CONTROLLER- With high value aluminum speed controller, it can switch auto control with temperature sensor or manual speed control depending your need.
• SILENT OPERATION FAN - Take TITAN professional 9-blades kukri silent fan, this fridge vent fan or multi-purpose fan provides you the quietest operation experience ever without any disturbing.
• WARNING: Do not attempt to revise polarity to change the airflow direction. It would not revise the airflow direction. It will only cause permanent damage to the fan controller. The airflow would blow out from the cross grille side of the fan. Please connect the cable to the same polarity (positive to positive/ negative to negative)

User questions & answers

Question:	Where can I get the installation instructions? Mine appears to be a returned unit and did not come with any
Answer:	If you’re certain it’s a reliable 12V source, it could be a bad fan assembly. One of my fans stopped working and the manufacturer sent me a whole new set.
Question:	Is there a breaker or fuse in this system? I wired it up and have checked the voltage with a multi meter but no lights and no operation
Answer:	Sure, just point the direction to blow out. That's what I did for my refrigerator in my camper, put the fan to blow out on the upper vent..... wasn't very impressed with the controller that they supply, I just cut the wires and used the Fan's
Question:	where is this manufactured
Answer:	The sensor is on the end of a wire as long as the ones going from the control to the fans. I mounted mine just below the baffles in the top of the frig. I mounted the fans on the air exhaust vents just in front of the baffles so it would draw the air over them and out of the vehicle. I mounted the control down below on the back of the frig so I could reach it thru the lower vent.
Question:	What is the amperage draw of the fans? There was an answer to see a picture, but I don't see amperage use in any picture
Answer:	No it doesn’t

Product features

Choose the RV fridge fan to cool down your RV fridge

IP 55 Waterproof fan

IP 55 Waterproof &dustproof fan, perfect for outdoor use

Rack hook design for RV fridge vent

Great for refrigerator vent & grille ventilation in your RV, Motorhome, camper van, camper truck, caravan or any cabinets.

6 levels Speed Controller

• Auto Temperature Control
• 20°C (68°F) auto turn off the fan
• 45°C (113°F) auto operate at maximum speed
• 6-levels manual controller to adjust for particular needs

RV fridge vent suggestion

Please measure your fridge vent size and choose the proper double fan size (90mm, 120mm)

• 90mm: 184 x 92 x 30 mm
• 120mm: 240x 120 x 30 mm
• 140mm: 290 x 145 x 31 mm

-NOTICE:

• Please test the double fan and control unit necessarily BEFORE INSTALLATION.
• Do not attempt to revise polarity to change the airflow direction. It would not revise the airflow direction. The airflow would blow out from the side of the fan cross grille. If you revise the polarity (positive to negative), the fan and controller would not work.
• Please connect the cable to the same polarity (positive to positive/ negative to negative)
• There is a probe to detect the temperature of the environment near the evaporator of the refrigerator. We suggest placing the sensor in about 1 inch freely suspended to the evaporator because there is the warmest area.

TTC-SC22 -90mm

• Outline Dimension: 184 x 92 x 30 mm
• Fan Dimension: 92 x 92 x 25 mm
• Rated Voltage: 12V DC
• Rated Current: 0.48 A
• Power Consumption: 5.76 W
• Rated Speed: 500~2600 RPM
• Airflow: 106 CFM
• Static Pressure: 0.12 Inch H₂O
• Noise Level: 28 dBA
• Bearing Type: Two ball/ Life Time: 50,000 Hours

TTC-SC22(B) -120mm

• Outline Dimension: 240x 120 x 30 mm
• Fan Dimension: 120 x 120 x 25 mm
• Rated Voltage: 12V DC
• Rated Current: 0.56 A
• Power Consumption: 6.72 W
• Rated Speed: 2000 RPM
• Airflow: 121.13 CFM
• Static Pressure: 0.12 Inch H₂O
• Noise Level: < 32.9 dBA
• Bearing Type: Two ball/ Life Time: 50,000 Hours

SPEED CONTROLLER

• Outline Dimension: 85 x 37x 15.5mm
• Input Voltage: 12V DC
• Output Voltage: 7~13.8V DC
• Max Output Current: 1A
• Temperature Measuring: 20°C~ 45°C (500~2600RPM)

Product description

This controller will run for four HID lights 240 volts. The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays. Plug relay trigger cord into 24 hour wall timer to run your lights. Multi-tap outlets allow total flexibility. Plastic enclosure resists dust and moisture. 20 Amps/240 Volts/60Hz./4000 Watts. 3 year warranty.

• This controller will run four HID lights at 240 Volts
• The only lighting controllers featuring industrial-grade ballast rated relays
• Plug relay trigger cord into 24 hour wall timer to run your lights

User questions & answers

Question:	Can i hook this up to a standard outlet wire 120 to run 120 ballast
Answer:	Installation is easy. Take the fan unit and set against the cooling fins to see where the brackets should mount. The brackets have little tabs on them so they mount at the correct angle for best cooling. Be sure to clean the fins with rubbing alcohol and dry thoroughly before attaching the velcro to the cooling fins. I left both sides of the velcro attached to the mounting brackets and just peeled off the film so that you can get the brackets in proper position before adhering it to the fins. This is actually pretty quick and easy to do. Once both brackets are securely in place you can pop on the fan unit with the tabs at the corners. The wire for power is fed thru the drain tube out the back where you attach it to a 12 volt power source. This is the mist difficult part of the job. I used a 12 volt tester to find a live power wire coming from a fused wire going to a cooling fan in the back of the refrigerator. The fan unit you installed has a fuse built in ( that little black phillips head thing by the switches) so you don't have to actually find a fused wire to hook to. I didn't use the parts included with the wiring as it was easier for me to use a little blue clamp on wire connector that I could snap on the wire where it was convenient for me. Red goes to power, black to ground. This is a great unit and with it and another part that replaces the thermistor inside the fridge called Snip The Tip (google it) I was finally able to get my temps down to 43° even in 100°+ weather. Hope this helped.
Question:	I have an open 40 amp breaker can I safely wire in Helios 11 (30 amp) and run my ballast? Or do I have to step the amps down before it’s wired in
Answer:	Not that I’m aware of
Question:	Can I use 10 3 wire fall Helios 11 Titan controller
Answer:	I believe it is made in Germany. Typical super high quality
Question:	So all i do is plug this into my 220 timer and it will be ready to work? Or do i gotta hardware all new wires to it
Answer:	Hello, owing to this product is DC fan, the amperage of the fan is low. I can offer you the rated current. of the fans. Please see below. Hope it is clear for you. Thank you. TTC-SC09(A) 90mm is 0.48 A. / TTC-SC09(B) 120mm is 0.56 A. / TTC-SC09(C) 140mm is 0.8 A. Maximum Output Current of the speed controller is 1A.

Product features

Titan Controls 4-Light Controller

This controller will run four HID lights at 240 volts. The only lighting controllers featuring industrial-grade ballast rated relays. Plug relay trigger cord into 24 hr wall timer to run your lights. Universal outlets allow total flexibility. Enclosure resists dust, rust, and moisture.

Product description

Controller turns off your lights if high temperature exceeds set point. Built in 1 - 30 minute 'hot start' delay with 'HOLD' feature. 6 foot temperature probe is accurate to within 2Degree F. Protects your garden & keeps your plants safe. Plastic enclosure protects internal components from dust and moisture. 15 Amps/120 Volts/60 Hz. 3 year warranty.

• Controller turns off your lights if high temperature exceeds set point
• Built in 1 - 30 minute 'hot start' delay with 'HOLD' feature
• 6 foot temperature probe is accurate to within 2Degree F
• Protects your garden & keeps your plants safe
• 3 year warranty

User questions & answers

Question:	How long is the probe cord
Answer:	Yes, standard 120v 3-prong socket
Question:	Can I plug a timer to this unit that is connected to a trigger cord from a Helios
Answer:	Thermostat wiil
Question:	Does this controller plug into an outlet? Are there prongs on the back to plug it in
Answer:	it has one plug so only one thing can be plugged in. if you plug in a power strip or something then obviously all units on the strip will adhere to the timer. in other words you would need to get two separate ones if you want them on their own independent timers. are you some super advanced grower who is going for an award or something? remember your biggest factors are space, light, and grow medium. worry about these and then someday if you are looking good then bring in the co2.
Question:	Will this controller and kick on a portable a/c
Answer:	60 min max off. but remember if you can work with 5 minute on/off increments then just get a cheaper 24hr timer. if you need less than 5 minutes on or off then this one will do just fine.

Product description

This controller will allow you to precisely monitor and control the environment in your grow room. Featuring an easy to use analog interface, this digital controller is easy to program and use. Each set point (temperature, humidity and CO2) are programmed using a set of dedicated knobs. Readings are displayed on easy to read digital displays. The sensor which measures the temperature, humidity, light and CO2 levels in your room attaches to the controller with a 15 ft cord. Enclosure resists dust, rust and moisture. 14.5 Amps maximum/120 Volts/60Hz.

• Each set point (temperature, humidity and CO2) are programmed using a set of dedicated knobs
• Featuring an easy to use analog interface, this digital controller is easy to program and use
• This controller will allow you to precisely monitor and control the environment in your grow room
• 14.5 Amps maximum/120 Volts/60Hz.

User questions & answers

Question:	Any data logging capabilities
Answer:	Yes you can set both the day and night temperature so the fans will keep a certain temp during the day and a certain temp during the night.
Question:	Warranty? On this unit
Answer:	Nope! Once you set the Titan temperature controller for a "heater" or a "cooler" the photocell works on its own! But you first have to set it for either before it will work properly.
Question:	Does this unit offer a calibrating option
Answer:	Yes,but will only go to 75 degree
Question:	cuantos extractores puedo instalar en la terminal de salida del abanico
Answer:	Hi, the Titan Zephyr 1 temp controller only has 1 outlet (120V) and a maximum of 15 Amps. So you can only control 1 device at a time under 15 Amps
Question:	Will the fans turn back on at night if the temp gets too hot? Or does it just work one way
Answer:	Hello, No, the Helios 11 needs to be hard wired with 240V. This box isn't designed to have 120V going through it. Please use an electrician as it is required for warranty. Thank you
Question:	Is there anything special needed to make the photocell aspect work? First one I purchased would not recognize light vs dark. Photocell light doesn't
Answer:	The Titan Controls Helios 11 is designed to be operated via a 30A/240V Breaker with properly gauged (AWG) 75°C copper wire. I must advise you to have a licensed and certified electrician go over your power needs and install any of our lighting control equipment for you. Improper installation of our equipment not only voids the warranty of the product but can be very dangerous.
Question:	Can the temperature probe be submerged in a water chiller to control water temperature
Answer:	Ask an electrician
Question:	can i plug in a exhaust fan and a airconditioner at the same time
Answer:	Yes you will need to wire it into at least a 30 amp breaker. Then you can just plug in your lights. But there is some hard-wiring that needs to be done.

Product description

The Atlas 8 is a digital CO2 monitor and controller. Once the CO2 level has reached your desired set point it will disable the CO2 device. It features a photocell to ensure 'daytime only' dosing of CO2 via a generator or regulator. This controller comes with a 15' remote sensor that houses the photocell and CO2 sniffer. Besides having traditional injection capabilities, it also features fuzzy logic programming. Fuzzy logic applies constant calculations to the output controlling your CO2 regulator to ensure that you do not undershoot or over shoot your predetermined set point. The CO2 min/max can also be viewed on the LCD. Plastic enclosure resists dust, rust and moisture. 15 Amps/120 Volts/60 Hz. 2 year warranty.

• Digital CO2 monitor and controller
• Once the CO2 level has reached your desired set point it will disable the CO2 device
• It features a photocell to ensure 'daytime only' dosing of CO2 via a generator or regulator
• This controller comes with a 15' remote sensor that houses the photocell and CO2 sniffer
• Features fuzzy logic programming

User questions & answers

Question:	Mark anthony yeadon hi can you just set a ppm level ?? can you turn fuzzy logic on and off
Answer:	Negative, not with this unit.
Question:	Can you plug in two tank regularos
Answer:	The Titan Controls® Spartan Series® Complete Digital Environmental Controller (702450) has a one (1) year warranty that covers manufacture defects.
Question:	Can you get a longer extension cable for sensor? Like a 30 foot instead of 15foot one it comes with
Answer:	Yes, you can calibrate the sensor for CO2. See above for manual.
Question:	Can the display and lights be turned off while activated? I don’t want my flower period interrupted
Answer:	The Spartan Complete Environmental controller can safely operate up to 5 amps on one outlet. The maximum amperage draw for the entire unit is 14.5 amps. El controlador Spartan total ambiental puede operar con seguridad hasta 5 amperios en la salida de una. El amperaje máximo para toda la unidad es de 14,5 amperios.

Product description

Allows precise humidity control with a 20%-90% range. Change from humidification to dehumidification with a Flip of a switch. Controls a humidifier, dehumidifier or fan. Durable powder-coated steel enclosure will standup to the toughest conditions. Grounded piggy-back cord is easy to use. Ventilation louvers help avoid water accumulation. Built in 4% split differential. 15 amps maximum/120V/60 Hz.

• Allows precise humidity control with a 20%-90% range
• Change from humidification to dehumidification with a Flip of a switch
• Controls a humidifier, dehumidifier or fan
• Grounded piggy-back cord is easy to use
• Ventilation louvers help avoid water accumulation

User questions & answers

Question:	How long is the piggy back cord
Answer:	Yes you can for both
Question:	Does the controller have some built in mechanism that detects the humidity? How does it know when to shut off and on
Answer:	Yes you can hook multiple co2 regulators as they don't use a lot of amperage
Question:	can I plug this into a standard outlet
Answer:	You can purchase seperate 15 ft extension cables
Question:	Will it go up to and maintain 99% humidity
Answer:	This controller uses green lights that will not disturb your flower period.

Product description

The 4 light controller operates up to 4000 watts of grow lights in your garden. It features: heavy duty definite purpose contactor, trigger cord set that activates your lights via an external wall timer and universal outlets that allow the use of 120 volt or 240 volt cord sets. The controller is housed in a rust, dust and moisture proof enclosure. 30 amps input power/20 amps output power/240 volts/60 Hz./4000 Watts.

• Operates up to 4000 Watts of grow lights in your garden
• Heavy duty definite purpose contactor
• Trigger cord set that activates your lights via an external wall timer
• Universal outlets that allow the use of 120 Volt or 240 Volt cord sets
• 30 Amps input power/20 Amps output power/240 Volts/60 Hz./4000 Watts

User questions & answers

Question:	I live overseas, out outlets here are 220-240, if the trigger cord is 120 then how do i make that work
Answer:
Question:	Is there a thru bulkhead cable clamp stress relief included on this box? Or does the large wire just sloppily enter the box
Answer:
Question:	How long is the power chord for the timer (120V) Trigger
Answer:
Question:	Why does my light controller sometimes make a very loud noise when it gets turned on
Answer:

Product description

Product Description

A high-airflow ventilator fan designed to control the temperature and humidity levels of your crawlspace, basement, attic, and garage. This system reduces humidity levels to prevent mold growth while exhausting out odors and other harmful pollutants like Radon from your home. Features a LCD display with smart thermostat and dehumidistat control, as well as customizable fan speeds. Included corded sensor probe plugs into the controller to provide temperature and humidity readings. Heavy-duty build includes a stainless steel mounting frame and IP-44 rated fans. Features dual 120mm PWM-controlled DC fans that are highly efficient in maximizing airflow at lower noise and power levels. Includes hardware and 6-foot corded power supply needed to mount the unit onto a surface and power it through an outlet.

Smart Programming

The controller on each unit features active temperature and humidity monitoring that can be programmed to change fan speeds to respond to varying temperatures and humidity. The program can also set the fans to run continuously or on a timer at custom speeds. Also features alarm warnings, fan failure alerts, eco-mode, and backup memory. Includes 8-foot corded sensor probe.

Heavy-Duty Performance

The fan system is enclosed in heavy-duty stainless steel with spiral fan guards. Utilizing DC motors that are controlled using PWM (Pulse Width Modulation), the fans can maximize airflow while reducing noise and power consumption. In addition, the dual 120mm fans are IP-44 rated to be highly resistant to liquids and dust particles. The motor houses dual-ball bearings that are rated at 67,000 hours and allow this fan system to be mounted horizontally or vertically.

• A fan system designed to provide ventilation and moisture control for crawl spaces and basements.
• Reduce humidity to prevent mold growth while exhausting out odors and pollutants from your home.
• Programmable controller with corded probe, can adjust airflow in response to temperatures and humidity.
• Heavy-duty stainless steel frame with IP-44 rated fans to be highly resistant to liquids and dust.
• Includes Wall Adapter | Design: Exhaust | Dims.: 18 x 9 x 1.6 in. | Airflow: 240 CFM | Noise: 32 Dba

User questions & answers

Question:	can i put it in a small window and is it weather proof of occasional rain blows on it if rain comes thru window screen? Can this be turned on manuall
Answer:	Hi there, Thank you for reaching out to us! This product is rated as weatherproof so it can take light water but we don't recommend using it if you anticipate it getting drenched or splashed with a lot of water. This fan can be turned on and off by going into "ON" or "OFF" mode respectively. Kind regards, Kenny Ngo AC Infinity
Question:	Does this unit install under the home inside crawl space? Or out side of home? Will it fit a 16" opening
Answer:	Hi there, Thank you for reaching out to us! This unit is installed from inside of the crawlspace or basement so it would be programmed from within. The unit should be able to mount on your 16" opening as long as the up and down dimensions are within mountable range as well. Kind regards, Kenny Ngo AC Infinity
Question:	can it be turned off/on with a smart plug and not use any other method like temp or humidity
Answer:	I use their register vent smart fans in this manner and it maintains settings. Presuming sane electronics for these I would hope the same
Question:	Is it really the exhaust version? If you are facing the display and it turns on, do the fans blow towards your face or away
Answer:	Hi there, Thank you for reaching out to us! This fan will be the exhaust version and if you are facing the display, the air will blow away from you. Kind regards, Kenny Ngo AC Infinity

Product features

Smart and Quiet Ventilation

Quietly bring in fresh air and exhaust out pollutants to make your home safe and comfortable. The AIRTITAN fan system can reduce moisture levels which can cause mold, rot wood, and attract insects. It can also help exhaust out chemicals such as Radon, smoke, unwanted heat, and odors that can build up to harmful levels.

Smart Programming

The controller adjusts airflow in response to temperatures and humidity you have set. Also features timer, alarms, backup memory and eco-mode.

Quiet PWM DC-Motor

Each system utilizes a DC-motor that is controlled using Pulse Width Modulation (PWM), which is quieter and more energy efficient than AC fans.

Heavy-Duty Build

Features a galvanized steel or aluminum mounting frame with fan guards. Rated IP44 to be dust and water resistant for various weather conditions.

Plug and Play

Complete kit includes the fan unit, user manual, corded sensor probe, and everything needed to mount the system and power it through an outlet.