11 best rated attic fan

Product description

Product Description

A high-airflow ventilator fan designed to control the temperature and humidity levels of your crawlspace, basement, attic, and garage. This system can also reduce humidity levels to prevent mold growth, while ventilating out odors and other harmful pollutants like Radon from your home. Fans are set to blow towards the mounting frame. Features a LCD display with smart thermostat and dehumidistat control, as well as customizable fan speeds. Included corded sensor probe plugs into the controller to provide temperature and humidity readings. Heavy-duty build includes a anodized aluminum mounting frame and IP-44 rated fans. Features dual 120mm PWM-controlled DC fans that are highly efficient in maximizing airflow at lower noise and power levels. Includes hardware and 6-foot corded power supply needed to mount the unit onto a surface and power it through an outlet.

Smart Programming

The controller included with each unit features active temperature and humidity monitoring. Fan speeds can be programmed to automatically adjust to high and low temperatures and humidity. The program can also set the fans to run continuously or on a timer at custom speeds. Also features alarm warnings, fan failure alerts, eco-mode, and backup memory. Includes a 12-foot corded sensor probe. Up to two AIRTITAN S3/T3 or two AIRTITAN S7/T7 can be linked to one controller to share the same programming.

Heavy-Duty Performance

The fan system is enclosed in heavy-duty aluminium with spiral fan guards. Utilizing DC motors that are controlled using PWM (Pulse Width Modulation), the fans can maximize airflow while reducing noise and power consumption. In addition, the dual 120mm fans are IP-44 rated to be highly resistant to liquids and dust particles. The motor houses dual-ball bearings that are rated at 67,000 hours and allow this fan system to be mounted horizontally or vertically.

• A high-airflow fan designed to provide temperature and moisture control for crawl spaces and basements.
• Reduce humidity to prevent mold growth, while ventilating out odors and pollutants with fresh air.
• Programmable controller with corded probe, can adjust airflow in response to temperatures and humidity.
• Heavy-duty anodized aluminium frame with IP-44 rated fans to be highly resistant to liquids and dust.
• Includes Wall Adapter | Dims.: 11.7 x 6.1 x 1.8 in. | Airflow: 240 CFM | Noise: 32 Dba | Bearings: Dual Ball

User questions & answers

Question:	Has anyone used this in a RV for reduction of humidity
Answer:	Model AEN110 is branded as NuTone product and is the same unit as model AE110 branded as Broan product.
Question:	re: backplate; i'm looking for just the backplate like the airtitan t8. or the remote (this model) with that backplate
Answer:	The AEN110 must be hardwired to a wall switch.
Question:	Is there a longer cable available between the control pad and the fan
Answer:	The AEN110 offers a polymeric, 4” duct connector with tapered sleeve and no metallic clatter. you can view Specifications and Installation Instructions at www.broan.com.
Question:	How many unit would you need for a 1600 square foot home
Answer:	Thanks for reaching out to us direct. Blocking anything within the line, or on the outside, would not be recommended. Pleae contact Technical Support at 1-888-336-6151 for additional assistance or trouble shooting suggestions.

Product features

Smart and Quiet Ventilation

Quietly bring in fresh air and exhaust out pollutants to make your home safe and comfortable. The AIRTITAN fan system can reduce moisture levels which can cause mold, rot wood, and attract insects. It can also help exhaust out chemicals such as Radon, smoke, unwanted heat, and odors that can build up to harmful levels.

Smart Programming

The controller adjusts airflow in response to temperatures and humidity you have set. Also features timer, alarms, backup memory and eco-mode.

Quiet PWM DC-Motor

Each system utilizes a DC-motor that is controlled using Pulse Width Modulation (PWM), which is quieter and more energy efficient than AC fans.

Heavy-Duty Build

Features a galvanized steel or aluminum mounting frame with fan guards. Rated IP44 to be dust and water resistant for various weather conditions.

Plug and Play

Complete kit includes the fan unit, user manual, corded sensor probe, and everything needed to mount the system and power it through an outlet.

Product description

The factory Refurbished Mohu Leaf HDTV antenna comes with a 90 day warranty for defects and has been fully tested by Mohu. The factory Refurbished Leaf television antenna comes with a 10ft foot high performance cable. The Leaf TV antenna delivers the top 20 network shows and more for free TV in full 1080p HD with no monthly cable or satellite bills. The Leaf digital TV antenna is the original paper-thin HD antenna for TV that provides unparalleled performance for an indoor HDTV antenna. The Leaf digital antenna for HDTV combines with any streaming device for maximum viewing options, and is the is the antenna of choice for cord-cutters everywhere. The Leaf indoor antenna can be easily hidden behind a picture, bookshelf, or television. The reversible black and white design can even be painted to match any decor. The combination of its unobtrusive design and powerful reception capabilities make the Leaf a top choice in any home. The unique design concept for the Leaf is modeled after a discrete mud flap antenna developed for the U.S. Military by Mohu parent company, Greenwave Scientific. The Leaf was designed and is manufactured in Raleigh, North Carolina.

• NEWLY TESTED 40 MILE RANGE: HDTV antenna enables access to free channels only - does not enable access to paid channels such as such as ESPN/Fox News
• 10 FT COAXIAL CABLE INCLUDED: Multi-directional and Reversible HDTV Antennas - Paintable to match any decor, no "pointing" needed
• RECEPTION TOTALLY DEPENDENT ON LOCATION and the type of signal being transmitted in the area (VHF/UHF). DISCLAIMER: The results of available channels in your area is an estimate based on your location and the location of the TV transmitters in your area and is not guaranteed. Every location is unique in terms of local terrain foliage and installation details which will affect your reception.

User questions & answers

Question:	Can I hang the leaf directly behind my HDTV so that it is not visible? I don't think that my wife would want this visibly hanging on the wall
Answer:	The "upgrade" is that this grille comes with the antibacterial LED. If you have additional questions, please call our Customer Service Department at 1-888-336-3948. Thanks.
Question:	How do you connect to the TV. Do you need to purchase any additional equipment
Answer:	The AR110LKVV can be connected to a humidity sensing wall switch, but you will need two switches for this unit - - one for fan (humidity sensor) and one for the light (on/off). If you are just trying to use one switch, once the humidity drops below the setpoint, they will not have the UV light working. The UV light probably wouldn't come on at all since the regular LED comes on first, then switches over to UV after 1 hour. We would only recommend the humidity sensing switch be used on the fan.
Question:	Obviously, where you live determines how well any antenna works. Does anyone know how to find out about how an antenna works in a specific location
Answer:	Yes. We recommend the AR110LKVV have continuous use for best performance. The SurfaceShield ™ mode only draws 3.6 Watts of power. Continuous operation will cost less that $4.00 per year. If you have additional questions abut this product, Please contact our Techncicl Support Department at 888-336-6151 Monday through Friday between 8:00 am and 7:00 pm EST.
Question:	can you hide it behind a media center? or will that cause issues with the reception? thanks for any info
Answer:	The AR110LKVV is a nice unit! I hope this will be of assistance. The SurfaceShield LED module comes with two light modes, white light mode and SurfaceShield mode. White light mode is a standard white LED light and the SurfaceShield mode uses an advanced light mode designed by Vital Vio®. 1. To manually enter SurfaceShield mode: Flip the light switch ON-OFF-ON within 10 seconds. 2. To automatically enter SurfaceShield mode: Leave the white light mode ON, and the SurfaceShield mode will automatically come ON after approximately 1 hour. 3. To enter white light mode: Flip the switch to the ON position. If the light is in SurfaceShield mode, flip the switch OFF-ON to enter white light mode.

Product description

Ensure comfort in your bathroom with the Broan InVent Bathroom Exhaust Fan! This high-quality single speed fan eliminates moisture and reduces humidity in your bathroom at 80 CFM up to 75 sq. ft. The fan includes an 11 watt, 3000K, integrated LED module. The compact housing is designed to mount directly to inboard joists, making retrofit or new installation applications easy and simple. With our TrueSeal damper technology, InVent fans reduce air leakage by up to 50% compared to competitive models, resulting in better home performance via blower door tests and reducing cold and warm air back drafts. Retrofit installation is easy with the EzDuct Connector and can be done entirely room-side - no need to crawl up into your attic! It can be used over the bathtub or shower with the GFCI circuit. Upgrade your bathroom with the Broan InVent Bathroom Exhaust Fan and Light today!

• HIGH-QUALITY FAN COMBO: Quiet, energy efficient exhaust fan and 11 watt, 3000K, integrated LED module combo. Unit helps control air quality is powerful enough for rooms (including bathroom) up to 75 sq. ft.
• EFFICIENT: Powerful ventilation reduces humidity to quickly eliminate fogged mirrors and manage moisture at 80 CFM and 1.5 Sones, so your vision will always be clear and your surroundings will always be comfortable
• EASY INSTALLATION: Easy to install new/replace existing product with retrofit installations that can be done entirely from the room-side – no attic access required
• RELIABLE PERFORMANCE: With our TrueSeal Damper Technology, InVent fans reduce air leakage by up to 50% compared to competitive models, resulting in better home performance via blower door tests and reducing cold and warm air backdrafts
• GREAT FOR BATHROOM: UL Listed for use over tubs and showers with a GFCI circuit so you can capture the steam before it spreads throughout the room by placing your fan exactly where you need it the most

User questions & answers

Question:	Does this come with the hardware kit
Answer:	No doubt it would keep the attic cold! And yes, it would move air(ventilate) the attic, but it sounds like that you have a problem in your attic that requires a different approach. Condensation is something can be produced by improper venting of a furnace or other appliance that should have been vented all the way through the top of the roof. Even exhaust fans from bathrooms and kitchens will allow the moist, warm air to be trapped inside of the attic. Then there is the insulation itself. If there is inadequate insulation in even one part of the attic, then a condensation problem may arise from that. This particular attic fan moves quite a bit of air, but I'm not sure that it would solve the problem as much as mask the symptom.
Question:	Separate light and fan switch
Answer:	No wall plug or electrical lines. You have to run your own wires, use at minimum 14-2 wire and connect using wire nuts or push wire connectors.
Question:	Never mentions light in reviews or specs. how many lumens does it have? it would be the only light in a small shower/toilet enclosure. is it enough
Answer:	I don't see any information for sones in the product data. From experience in using this fan in my attic, I will hear a hum when at the end of the house where the fan is located in the attic but I don't find it annoying. I live in a 1400 sf ranch style house. The fan is in the attic right over my bedroom. It's usually off in the evening when I'm in the bedroom. If it were on when I was trying to sleep I would hear it but I don't feel it would be loud enough where I would have a problem getting to sleep and staying asleep. Not a technical answer but some input as to the sound level of the fan.
Question:	Are there separate circuits to control the fan separately from the light
Answer:	I would, but the unit is already installed in my attic in an area which is hard to access. I can tell you I located it behind a gable in my attic, and that place is directly above my master bedroom. When the unit goes on, for which I have verified it's operation, I can not hear it at night when I sleep. It is very quiet.

Product description

The Energy Saver Classic line of Quiet Cool Advanced Whole House Fans was first introduced in 2011 and was a breakthrough in the whole house fan industry. With energy consumption as low as 61 watts, the Quiet Cool Energy Saver Classic Line will help you save up to 50‐90% off your A/C related energy costs.

• The Quiet Cool Energy Saver Classic Line features our patented, self‐contained duct system that hangs in the attic to help neutralize the sound and noise vibration heard in the home
• The included damper system features barometric pressurized gravity dampers that insure there will be not heat/cooling loss between the home and attic.
• All Quiet Cool energy saver classic line fans include our ultra-high efficiency electronically commutated ac/dc brushless motors
• 2261 cfm
• Covers up to 1130 square feet

User questions & answers

Question:	Can this be installed on a wall
Answer:	They can be wired to operate together or independently.
Question:	Looking for cfm output in low mode using quite cool 2 speed switch. info for es
Answer:	Thank you for asking! Without seeing your exact project, I wouldn't feel comfortable saying either yes OR no. BUT, I would be happy to provide you with some more resources to help you make your decision. I would recommend going to the manufacturers product website as below. There, you will find specifics about the size of the hole ( you will need approximately 6 3/8" to 6 1/2" hole), and the size of the trim to cover the hole (7 3/8"), as well as information about the size of the unit itself. There is also a question section there with a ton of answers that may help you. http://www.nutone.com/products/product/5a366a34-8bac-41d8-905c-050e35faac01The only comment specifically in response to your question that I can make is that if your ceiling is tiled and you don't want to cut it and repair the area, you will need to have attic access above the installation area to install the fan from above. Otherwise, you'll never be able to squeeze a 7x8x12 inch box through a 6" hole! ;) Hope this helps.
Question:	Is qc es3100 single or two speed
Answer:	Model 744LEDNT is a recessed fan and LED light. It uses a BR30-shaped, 2700K, 9.5W, high efficacy, dimmable, LED lamp with GU24 base (included). We do not recommend any other light fixtures for this model.
Question:	Does it come with a switch
Answer:	The Nutone 744LEDNT unit has an LED bulb included while the Broan 744 is made for use with incandescent bulbs.

Product features

HOW IT WORKS

Our Whole House Fans utilize what already exists to create something offered nowhere else. Open two or three windows a few inches wide, turn on your QuietCool Whole House Fan, and experience fresh, cool air replacing your indoor air in 3-4 minutes. Your Whole House Fan will quietly pull air through the windows, into the attic, and out the attic vents giving you a cost effective way to keep your home cool and fresh.

SAVE UP TO 50-90%

Save up to 50-90% on A/C related costs and even more on preventative care that protects your attic, home, and A/C from costly damages with a QuietCool Whole House Fan. You won’t only use your A/C less but your home will be cooler longer because our products do something A/C can’t; cool the thermal mass of your home.

CONTROL YOUR FAN FROM ANYWHERE

Our RF Control Kit allows you to turn on your QuietCool Whole House Fan from anywhere in your home! Use up to 100 feet away and receive cooling without ever leaving your bedroom.

Product description

Upgrade your home with Broan-NuTone's Gable Mount Attic Ventilator! This ventilator keeps your attic cool and dry all day long at a maximum 1020 CFM for up to 1630 sq. ft. The 14” diameter steel blade fan is pitched for maximum air flow to keep your living area cooler, extend the life of your air conditioner and save energy and money. The unit has a 22-gage galvanized steel housing ribbed for added strength with mounting brackets to simplify installation. The attic ventilator operates automatically and includes a built-in adjustable thermostat with a thermally protected lubricated motor. This HVI-certified unit also includes a built-in screen to keep out insects, animals or birds without impeding airflow. Transform your home today with Broan-NuTone's Gable Mount Attic Ventilator!

From the Manufacturer

Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder’s (NAHB) Model Green Home Building Guidelines. Broan-NuTone’s inspiring heritage provides the foundation for its three award-winning, global brands – Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home automation, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.

• HIGH-QUALITY VENTILATOR: Attic ventilator works to remove super-heated attic air in spaces up to 1630 sq. ft. at 1020 CFM
• DURABLE: Housing constructed of 22-gage galvanized steel ribbed for added strength with mounting for lasting use
• EFFICIENT: 14" diameter steel blade is specially designed for maximum air movement
• DURABLE: Thermally protected, permanently lubricated motor is built to last
• EASY TO USE: Unit operates automatically with an adjustable, built-in thermostat for your convenience

User questions & answers

Question:	Can it also be used in the winter to keep the attic cold and prevent ice dams
Answer:	Mine came with a Velcro tape . Apply the sticky side on the wood frame (be sure it is clean) and before you install the frame,use the Velcro furry side and wait a day or so to allow the tape to set/cure .Then install . I also installed a whole house cover to keep out excessive heat/cold when the fan is not in use. .
Question:	Does this fan come with a wall plug like a typical appliance? Can I just plug it into an electrical outlet or does it need to be hardwired
Answer:	I dont know. It was long time ago when I purchased it. I used velcro.
Question:	How loud is this fan? How many Sones
Answer:	Our smallest kit is 3'x4'. It is easily trimmed to fit by the installer with scissors or a utility knife. Thanks! Mark - Battic Door Energy
Question:	Would somebody with a smartphone be willing to download a decibel meter app (there are several free apps) and determine how loud the fan is? Thanks
Answer:	Our kit includes white Velcro. Most shutters are aluminum and magnets won't stick. The magnetic tape we have tried is too weak and cannot hold the insulate foam pad up. Thanks! Mark - Battic Door Energy

Product features

Broan 353 Attic Ventilator, Gable Mount, 1020 CFM

Trapped attic air can easily reach 150-degrees or more. This unit removes super-heated attic air, making any home more comfortable, whether it's air conditioned or not. In those homes that are, the air conditioners run less and don't have to work nearly as hard. And all Broan Powered Attic Ventilators are as efficient as they are dependable.

How much ventilation do you need?

Effective attic ventilation requires air to exit at or near the peak of the roof and replacement air to be drawn in under the eaves of the house, via soffit venting. The Home Ventilating Institute (HVI) recommends that powered attic ventilators provide at least 10 air changes per hour to equalize attic temperature.

Product description

The power shutter exhaust fan is perfect for removing excess heat moisture and unpleasant odors from virtually any commercial location including restaurants factories warehouses barns and greenhouses This fan features aluminium blades automatic shutters that open and close in tandem with the operation of the fan The completely enclosed motor is thermally protected and permanently lubricated The fan comes fully assembled out of the box only installation required is the electrical hardwire

• APPLICATIONS This 12 inch shutter/exhaust fan with automatic Shutters can help replace your ac unit by cooling your garage attic greenhouse shop or chicken coop
• INSTALLATION Can easily be added to a window opening or opening in the wall along with a thermostat to optimize cooling
• COOLIN AND GVENTILATION This industrial grade shutter fan can solve all of your cooling and ventilation needs
• RUST PROOF ALUMINUM SHUTTERS This shutter fan is made with corrosion resistant aluminium shutters and blades This provides longevity to the fan and will prevent any rust from forming
• 115 Volts, 60W, 0. 52A, 1620RPM, 940CFM

User questions & answers

Question:	How loud are these fans
Answer:	I put this in my garage for reduced humidity. It helped but I’m going to also install a dehumidifier
Question:	Is there a thermostat included
Answer:	Hello, Thank you for taking the time to reach out to us with your product question. Unfortunately, we do not have that information available here in our Marketing Department. However, we invite you to reach out directly to our Customer Care Center with your question and one of our representatives will be glad to assist you! Our Customer Care Center can be reached at [email protected] We look forward to hearing from you soon. Kind regards, -The AC Infinity Team-
Question:	Is it 1600 cfm per fan or for the 2 of them combined
Answer:	Hello there, Thank you for taking the time to reach out to us with your product question. At this time we do not make fan units which have longer cords. Also, we do not sell any extension cords. I apologize for any inconvenience caused by not having such an extension cord available for you. Kind regards, Andrew Avila AC Infinity
Question:	Would it be suitable for a patio roof perhaps ? Are the vents water proof and sealed
Answer:	Hello, Thank you for your inquiry. For your application you will need a HVAC system to properly ventilate your home. Kind Regards,

Product features

iPower 12 Inch Shutter Exhaust Fan

iPower 12 Inch Shutter Exhaust Fan is perfect for removing excess heat, moisture, dust and odors from virtually any residential or commercial space. Applications include: workshops, welding rooms, factories, warehouses, barns, and greenhouses.This wall mounted exhaust fan includes automatic gravity shutters that open and close in conjunction with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated.This fan comes fully assembled and ready to install out of the box.

• Rotating Speed：1620 RPM
• Air volume：940 CFM
• Wind Speed: 10.5M/S
• Watts : 60W
• Voltage: 115V/60Hz

Product description

This fan is a 12-volt dc fan with an 80-watt motor. It is configured to work with a solar panel ranging from 20 to 80 watts. The fan turns on as soon as the sunlight hits the solar panel and turns off at night. Keeps the house cool and ventilated with fresh air circulation all day. The dimension of the fan is 12" x 12" x 3" Fan can be installed in opening such as a gable vent. Where it can be easily connected to any solar panel. Full refund if the product is defective. 25-year warranty.

• 12 Volt Fan works with any Solar Panel from 10 watt to 80 watt
• Powerful 80 Watt DC Motor
• Compact High Performance DC Motor
• Built in USA

User questions & answers

Question:	Can this be used outdoors? Is it waterproof
Answer:	The answer is: maybe. You'll likely need to move the antenna around to see how the reception is from different heights and directions. Also I might be crazy but reception seems to change so I occasionally change where the antenna is placed - and scan for channels again. They recommend placing it up high and on an outside wall or window, but I've also used it tucked behind the TV when I didn't want it showing. (We have 3 TV's so 3 antennas, and we tend to rearrange the rooms from time to time so antenna configuration changes each time.)
Question:	Will this fan run off of a 12 V cigarette lighter in a car
Answer:	No need to buy anything. The package come with a long coaxial cable for connection between the antenna and your TV.
Question:	What type of connectors are needed for the bare fan wires to connect to a Suaoki 50W 18V 12V Solar Panel Charger
Answer:	Here is the info the MOHU company sent me. Call their Contact Center (855)446-6648 - or - web site, www.gomohu.com.I do not know what area (zip code) you reside in but I am in the 91423 zip and the Leaf Paper Thin Indoor antenna does not work for me.
Question:	What type of connectors are needed for the bare fan wires to connect to an 60 Watt solar panel
Answer:	Perhaps? A general rule of thumb for TV antenna placement is the higher you can get it, the better reception you will have and antennas do tend to work best in windows that are facing the direction of the towers. Most customers try several locations until they locate the spot where they get the most channels. Please remember that every time you move your antenna you will need to run your channel scan again.

Product features

Compact Powerful Performance DC Motor

This Powerful Attic Exhaust Fan is compact and equipped with a powerful 12-volt DC motor that can handle any wattage from 40 to 100 watt solar panel.

High Efficiency Fan Blade

This is high efficiency fan blade that moves huge volumes of air, thus ventilates and remove heat and moisture out off your attic and keeps your attic cool.

12-volt Fan Works with Solar Panel

This 12-volt DC fan can work with a solar panel from 40 watt to 80 watt. This fan works in all aspects such as airflow, sound intensity, vibration and efficiency. It’s suitable for solar application

Dimension:

The dimensions of the fan are 12" x 12" x 3". This design produces maximum air flow.

Easy Installation:

The fan can be installed in an opening such as a gable vent. The installation kit comes with 4 mounting tabs to install the fan.

WELCOME TO AMTRAK SOLAR

We produce some of the most powerful solar fans. We believe that ventilation is vital and we would like more people to be able to afford.

About Us

Amtrak Solar is a producer most of the powerful Solar Attic Fans in the industry and various other solar products. We set ourselves apart from others with our innovative designs and attention to detail.

Our Goal

Our goal is to help you, save money on utility bills by using solar products.

Product description

The Air King BFQ50 ENERGY STAR® Qualified SNAP-IN Exhaust Fan features a unique UL listed molded high impact plastic housing that provides multiple benefits. This high performance bath fan is constructed of a molded plastic housing, with no welds to break, and works as a natural sound absorbent. If you live anywhere near salt water, or the unit will be used in high moisture areas, this fan is a must. The high impact housing will not rust, giving the unit a longer life. Easily installs using the SNAP-IN Mounting System. Install the mounting bracket, SNAP the fan in place, connect the wiring and the ducting, and you are done. Installing an exhuast fan can now be done in minutes instead of hours. The 4-inch plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. UL listed for use over a tub or shower when installed in a GFCI protected branch circuit. This unit features a 50-CFM blower at 0.5-sone which makes for quiet operation. Makes an excellent ASHRAE 62.2 local exhaust solution with an exhaust capacity for rooms of approximately 45 to 65 square feet. The housing measures 9.0625-inches wide by 8.5-inches deep by 4.75-inches high, is HVI certified and can be used to comply with the ventilation standards required by LEED for Homes and California Title 24 requirements. The Air King BFQ50 ENERGY STAR Qualified SNAP-IN Exhaust fan comes with a 5-year limited warranty. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

What makes the air king high performance bath fan series unique is the UL listed molded high impact plastic housing that provides multiple benefits. "traditional" bath fan housings are fabricated from steel which involves bending and welding. This is a more expensive process and over the life of the fan welds can break, causing the fan to operate much louder or even with a rattling sound. Metal housings reverberate and echo noise. Because the air king high performance bath fan series is in an all plastic housing, there are no welds to break and the plastic is a natural sound absorbent material. If you live anywhere near salt water, or the unit will be used in high moisture areas, this fan is an almost must. The UL listed molded high impact plastic housing will not rust, giving the unit a longer life. The high performance exhaust fan series features a unique snap-in installation system. The included bracket nails or screws to the ceiling joist allowing the fan housing to "snap-in". This is so simple you can even replace an existing fan without having to rip out large sections of ceiling or climbing into the attic. Connect the wiring and the ducting, install the easy fitting grill and you are done. A bath fan installation can now be done in minutes instead of hours. The motors are suitable for continuous operation. The 4-Inch plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. This is an energy star model. UL listed for use over a tub or shower when installed in a GFCI protected branch circuit. This unit features a 50-CFM blower at 0.5-Sone which makes for quiet operation. Exhaust capacity for rooms of approximately 50-Square-Feet. Housing size: 9-1/16-Inch wide-by-8-1/2-Inch deep-by-4-3/4-Inch high.

• White, polymeric grill measures 10" x 10", with durable high-impact plastic housing for quiet operation and enhanced performance
• Operates at 50 CFM at 0.5 scones
• Features a special snap-in installation system for easy in-ceiling installation
• Comes with 4" plastic duct collar with back draft damper for quiet operation and draft protection
• Can handle continuous operation, is rated for ceilings insulated to R-40, Culus-listed, HVI 2100-certified, Title 24 compliant, ASHRAE 62.2 approved, and UL-listed for installation over a tub or shower on a GFCI circuit
• ENERGY STAR Qualified exhaust fan with high impact plastic housing to provide multiple benefits
• 50-CFM blower at 0.5 sones for almost silent operation

User questions & answers

Question:	Has anybody installed this unit in a pre-existing fan space? if so how easy was it to install and did you have to modify the ceiling very much
Answer:	it would take some fabrication but yes your probably better off looking for something that is made for a wall
Question:	Does this come with everything you need? I am replacing another fan, but am not sure if 3" or 4" ducting was used. I know it is louder with
Answer:	QC es3100 CFM Hi: 3081 / Low: 2020h
Question:	Can the fan be wall mounted
Answer:	It is a two speed fan but you can connect it up to run on a single speed (on high) or both speeds.
Question:	Hi folks, the product descriptions show two different noise level ratings. Was wondering is it rated at .5 sones or 1 sone? Thank you
Answer:	no it does not. I got the wifi hub and that made install pretty easy. they do sell a separate control switch

Product description

The Solar Attic Fan is a simple and environmentally sensible solution that can save you money. Powered completely by free solar energy, this sleek and efficient vent is both compact and quiet. Fully operational right from the box, it installs easily on pitched fiberglass-asphalt roofs, with no electrical wiring, no expensive electrician and city permits. And let's not forget powerful! A single 36 watt unit can fully vent up to 2,625 square feet, operating at up to 1,628 cfms. Place it wherever you need improved circulation; attics, lofts, workshops, storage sheds, garages, even barns. Attic venting is an important aspect in maintaining a healthy energy efficient home. Proper venting cools your roof extending the material life and reduces the load on your air conditioning system. Attic venting also increases fresh air circulation which reduces vapor build up generated by every day activities like showering and cooking. Excess moisture trapped in your attic can cause a variety of problems from rust and rot to increased bacteria and mold counts which can have a direct impact on your respiratory health! Passive vents have been a part of building codes for years. Soffit vents, ridge vents and louvers rely on nature to provide sufficient air pressure and air movement. So the majority of the time your attic is stagnant and continues to build up heat and moisture. No wiring needed. Lower your electricity consuption using this high quality solar powered attic exhaust fan today! Note: If you live in a climate that regularly goes below 70 degrees Fahrenheit during any part of the year, (most of the US) you may also want a thermostat switch, purchased separately. For installations on tile roofs optional turret extension and tile roof flashing kits are sold separately.

• 36 watt unit can fully vent up to 2,500 square feet.
• Exhausts at up to 1,628 cfms (cubic feet per minute) for up to 2625 Sq. Ft.
• Easily installed with No wiring required.
• Qualified for 30% Solar Federal tax credits.
• 25-Year warranty on motor, housing and solar panel.

User questions & answers

Question:	Can this unit work on a 2-12 roof
Answer:	I put mine 14 ft high in my barn wall and I only hear a slight hum when I have it on ,mine is the 12in exhaust fan so I’m sure the bigger fans would be a little louder but not by much still very quiet for how well it works
Question:	What size battery is needed
Answer:	No
Question:	what size roof cut out is required for this fan
Answer:	It's 900 CFM the 1620 is RPM
Question:	Did the installation of this fan have any effect on your energy bill? Curious as to how long it will take to pay for itself
Answer:	Yes it would and the louvers seal good and tight when the fan shuts off

Product description

Upgrade your home with Broan-NuTone's Gable Mount Attic Ventilator! This aluminum ventilator keeps your attic cool and dry all day long at a maximum 1000 CFM for up to 1400 sq. ft. The 14” diameter steel blade fan is pitched for maximum air flow to keep your living area cooler, extend the life of your air conditioner and save energy and money. The unit has a 23-gage metal flashing that allows for nailing and hot tar application and mesh bird screen. The attic ventilator operates automatically and includes a built-in adjustable thermostat with a thermally protected lubricated motor. Transform your home today with Broan-NuTone's Gable Mount Attic Ventilator!

• HIGH-QUALITY VENTILATOR: Aluminum attic ventilator works to remove super-heated attic air in spaces up to 1000 sq. ft. at 1400 CFM
• DURABLE: Housing constructed of 23-gage metal flashing that allows for nailing and hot tar application and mesh bird screen
• EFFICIENT: 14" diameter steel blade is specially designed for maximum air movement
• DURABLE: Thermally protected, permanently lubricated motor is built to last
• EASY TO USE: Unit operates automatically with an adjustable, built-in thermostat for your convenience

User questions & answers

Question:	Can this be used to vent a chimney for an outdoor grill kitchen
Answer:	Many of the reviews complain of the same issue. I read the reviews, but didn't expect the noise level to be that annoying. I would never recommend this product.
Question:	I already have an opening from an old attic fan. Its a square 14x14 inches. Will this opening work with this fan
Answer:	The box Extends close from the fan unit. It was set at installation and I can't reach it without a ladder. I do have a separate on/off switch connected where I can get to just in case...
Question:	what is the duct diameter it connects to
Answer:	we have it set at 90 degrees, fan turns on when attic temperature reaches 90. Our Electrician set it.
Question:	Does this seal (i.e open and close) so that you don't have air flow when it is not running
Answer:	The 356BR specification sheet indicates that this unit has a built-in adjustable thermostat - for automatic operation at your chosen temperature level.

Product features

Broan 358 120V Attic Ventilator, Roof Mounted, Aluminum, 1000 CFM

In summer, attics can reach 150-Degrees Fahrenheit or more, warming living areas, increasing the air-conditioning load, and adding to energy bills. In winter, ice dams can result, and moist air can condense causing mildew, rotting wood and wet insulation. Year-round attic ventilation ensures a cooler, drier attic that can extend roof life by preventing rot, premature aging and shingle distortion. A cooler attic extends the life of an air conditioner and lowers air conditioning expense.