12 best king ceiling fans

Product description

Cool and Circulate Air at Work

The Air King 9318 Industrial Grade Wall Fan is used to cool and circulate air in industrial or commercial settings including, loading docks, warehouses, health clubs and other commercial spaces. This fan can be mounted to walls, ceilings or steel beams to save floor and table space. The 9318 is suitable for busy warehouses or bustling gyms and keeps the power cord off the ground for high traffic areas. With a powerful motor and steel construction, this fan is the perfect solution for instant air circulation and cooling. Air King added a powder coated finish to the blade guard and mount for years of optimal performance. This unit is tested in accordance with AMCA standard 230.99, meets the made in America requirements of ARRA and is ETL and OSHA compliant. It comes with a 1-year limited warranty to protect against defects in materials and workmanship. Air King equipped this model with a powerful 3-speed, 1-phase motor that's fully enclosed for quiet operation and is rated at 120-volts, 1/6-horsepower and has 3-speed settings for cubic feet per minute of 3190, 2970, 2660 on high, medium and low and rotations per minute of 1500, 1300, 1100 on high, medium and low. The motor is rated for 1.5, 1.3 and 1 amps and 180, 150 and 125 watts. The industrial grade fan motor means high velocity air circulation with little to no maintenance.

Additional Features for a Dependable Work Fan

This fan features a pivoting head to direct airflow and an easy mount for fast installation. Other features include a rear mounted pull cord and powder coated, steel blade guard. The blade guard, motor housing and mount are finished in black. This unit includes a 9-foot, 3-conductor SJT type power cord and measures 21.5-inches (L) by 16-inches (W) by 21-inches (H) with an 21.4-pound weight.

About Air King

Air King offers a full line of industrial grade and commercial grade air circulating solutions. Whether it's for an industrial setting such as a manufacturing plant, warehouse or factory or a commercial setting such as an office, school or hospital, Air King has the perfect solution for you. Air King is known for its powerful motors that last for years.

• 18-Inch powder coated metal blade
• 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed ball bearing motor
• Rear mounted pull cord switch and a black, 9-foot, 3-conductor SJT type power cord
• ETL and OSHA compliant; Tested in accordance with AMCA standard 230.99
• Up to 3190 CFM
• 3190 CFM

User questions & answers

Question:	Can this multi mount be used as a floor stand or will it tip or fall over
Answer:	Yes this could be used on pets, but these are thinning shears and won't cut every hair between the blades.
Question:	Can the angle of this fan be adjusted left or right? Need to install on the ceiling stud of a covered deck but angle it from a corner
Answer:	Yes.
Question:	Does this come with the wall mount bracket or is it sold separately
Answer:	Right
Question:	Is this fan suitable for mounting outside, in the weather
Answer:	They seem to be nice shears and I like the comb that came with it!

Product features

Air King 9318 Industrial Grade High Velocity Multi Mount Fan

• Motor- 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed, ball bearing, permanently lubricated, permanent split capacitor
• Controls- Rear mounted pull cord switch
• Power Cord- Black, 9', 3-conductor, SJT type
• Coating- Blade, Guard, and Mounts are powder coated steel

Product description

The Air King 9374 24-Inch Industrial Grade Oscillating Ceiling Mount Fan is ideal for plants, warehouses, large offices and other industrial spaces that require powerful air circulation. The 9374 is a 24-inch, 90-degree oscillating ceiling mount fan with a rear mounted pull cord switch and a black, 10-foot, 3-conductor SJT type power cord. The motor is 3-speed, 1/3-horsepower, 120-volt, 1-phase, totally enclosed, ball bearing and permanently lubricated with a permanent split capacitor. This fan provides CFM's of 5770, 5250, 4270 on high, medium and low settings. Blade, guard and mounts are powder coated steel. The 9374 is ETL and OSHA compliant and has been tested in accordance with AMCA standard 230.99. The Air King 9374 24-Inch Industrial Grade Oscillating Ceiling Mount Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products. This product is not compatible with and will not work with any controller or dimmer.

• 24-inch industrial grade ceiling fan with a black finish
• Ideal for plants, warehouses, large offices and other industrial spaces
• 5770, 5250, 4270-CFM on high, medium and low settings
• ETL and OSHA compliant
• Comes with a 1-year limited warranty

User questions & answers

Question:	Does this work with a vaulted ceilng
Answer:	You would have to make a sturdier stand to attach it to.
Question:	Is it wet rated
Answer:	The fan is attached with a single bolt stud. When I attached to my deck, I first took a 2x4 piece about 2' long and screwed it between the roof trusses horizontally, then drilled a single 5/8" hole in the middle. Buy a 6" long 5/8 bolt and several nuts, washers and lock washers so it doesn't vibrate lose. Mine is in a corner also. This thing blows very, very hard, even on low.
Question:	can the oscillating feature be turned on and off
Answer:	The only hardware I needed purchase to mount this fan the wall was a lag bolt and a few washers. If you're going into concrete (like I did), you'll need an anchor.
Question:	How long is the mount bracket? Or how far down from the ceiling can I drop it
Answer:	The manufacturer makes t pretty clear this needs to be installed in a clean and dry location. Covered might be ok but definitely not exposed.

Product description

Hang this Air King 18-Inch 3-Speed Enclosed Ceiling Mount Fan almost anywhere and stay cool 24/7. This fan features an 18-inch blade diameter that circulates major air flow in gyms, auditoriums, school, and any sort of industrial space that needs some circulation. It has 3 speeds, is totally enclosed, and has a rear-mounted pull cord switch. The entire fan is coated in powder-coated steel to handle anything blown its way. Get a little breeze in your space with this Air King 18-Inch 3-Speed Enclosed Ceiling Mount Fan.

• 18-inch blade diameter, non-oscillating ceiling mount fan
• Ideal for gyms, auditoriums, schools, and industrial spaces that need powerful air circulation
• Motor: 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed, ball bearing, permanently lubricated, permanent split capacitor
• Controls: Rear-mounted pull cord switch
• Blade: 18 inches

Product description

The Air King 9320 20-Inch 1/6-Horsepower Industrial Grade Ceiling Mount Fan is ideal for gyms, auditoriums, schools, churches and industrial spaces that need powerful air circulation. This fan features a motor that is 3-speed, 120-volts, 1-phase, totally enclosed, ball bearing, permanently lubricated with a permanent split capacitor. The 9320 produces CFM's of 3,670, 3,330 and 2,940 (High, Medium, Low) and RPM's of 1,500, 1,310 and 1,050 (High, Medium, Low). This fan includes a rear mounted pull cord switch and a black, 9-foot, 3-conductor SJT type power cord. The blades, guard and mounts are constructed of powder coated steel. This fan is ETL and OSHA compliant and has been tested in accordance with AMCA standard 230.99. The 9320 measures 26-1/2-inches long by 10-1/2-inches wide by 29-1/2-inches high and weighs 23.7-pounds. The Air King 9320 20-Inch 1/6-Horsepower Industrial Grade Ceiling Mount Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.This product is not compatible with and will not work with any controller or dimmer.

• 20-inch powder coated metal blade
• 3-speed, 1/6-Horsepower, 120-volt, 1-phase, totally enclosed ball bearing motor
• Rear mounted pull cord switch and a black, 10-foot, 3-conductor SJT type power cord
• ETL and OSHA compliant and tested in accordance with AMCA standard 230.99
• Comes with a 1-year limited warranty
• 3670 CFM

User questions & answers

Question:	I need the bracket to attach to both side of the fan. They rusted out. Please help me love my 4 fans under the porch
Answer:	depends on the pitch
Question:	Is it really necessary to attach the "secondary support cable"? Did anyone install theirs without it
Answer:	I love this fan. I've had two of the northern tools pedestal type both of them died within 2 years. I expect this one to last for years and it doesn't eat up floor space.
Question:	Will this work outdoors- where it will get rained on
Answer:	Yes. There is a knob on the bottom of the fan body. The rotation can be turned off in any selected position by pulling the knob out.
Question:	I want to install this in my bedroom from the ceiling and use a wall switch to turn it on. Too loud? Can this be done
Answer:	With mount it is 17 inch from ceiling to bottom of motor housing. Total drop from ceiling to bottom of fan is 36 inches.

Product description

The Air King AS54 Advantage Exhaust Bath Fan features a stylish grill design that works with any home's decor. This exhaust fan has a high impact polycarbonate lens that allows for easy re-lamping and the fan and light can also be wired to operate separately. A 100-watt type A19 medium base incandescent bulbs (sold separately) can be used with this fan to provide added lighting for multi-functional use. With a speed setting operating at 50-CFM at 3.0-sones, the AS54 is suitable for bathrooms up to 50-square feet and other rooms up to 60-square feet. This fan's motor is suitable for continuous operation with low sound levels. This exhaust fan comes complete with an 4-inch round metal duct connection and a duct collar and damper. This exhaust fan is HVI-certified and UL listed for installation over a tub or shower on a GFCI circuit. The Air King AS54 Advantage Exhaust Bath Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

The Air King AS54 Advantage Exhaust Bath Fan is an economical way to provide ventilation at moderate sound levels without sacrificing style and function. This exhaust fan is ideal for smaller rooms, such as bathrooms, powder rooms and utility rooms. With a speed setting operating at 50-CFM at 3.0-Sones, the AS54 is suitable for bathrooms up to 50-square feet and other rooms up to 60-square feet. This exhaust fan comes complete with a back damper for quiet operation and a 4-inch duct collar for duct ventilation. The AS54 is simple to set up using the double thick keyhole mounting tabs for an easy installation process. This exhaust fan is UL listed for installation over a tub or shower on a GFCI circuit. The AS54 measures 7-1/4-inches by 7-1/4-inches by 4-3/4-inches and features a 23-gauge metal construction with a white finish. The Air King AS54 Advantage Exhaust Bath Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now.

• White exhaust fan provides ventilation at moderate sound levels
• Suitable for bathrooms up to 50-square feet and other rooms up to 60-square feet
• High impact polycarbonate lens allows for easy re-lamping
• Ideal for smaller rooms, such as bathrooms, powder rooms and utility rooms
• Comes with a 1-year limited warranty

User questions & answers

Question:	Does this model include a light
Answer:	Call the manufacturer is your best bet
Question:	does this have a normal plu that you can just plug into an outlet
Answer:	We did install for safety sake. Being that this unit vibrates whenever it is on, it would be a good idea. Don't want to have to fix the hole in someone's head......
Question:	Is the white plastic paintable
Answer:	If it rains you're screwed.
Question:	Dimensions of the cover
Answer:	It is way too loud for a bedroom. We installed in a huge garage -we have a t.v. in there and had to move it to a different spot in the garage because we couldn't hear the t.v. - It is great for our use but I don't think I would put in a bedroom unless you have a huge bedroom and don't mind the noise when you are trying to sleep.

Product description

One piece polymeric blower wheel. White polymeric grill. Dimensions: 10" x 10". One - 250 watt maximum, type R40 bulb, medium base infrared lamp to deliver silent heat to the room, bulb not included. Rated type IC for ceilings insulated to R-40. Plastic collar for 4" duct connection comes complete with built in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified.

From the Manufacturer

The bulb heater series brings silent, focused warmth instantly to the room, making it a perfect solution for outside of shower stalls and bathtubs. Instead of walking out to the cool room temperature, step into a stream of warmth coming from an air king bulb heater. Model AK917 features a 70-CFM exhaust fan and utilizes a 250-Watt maximum type r40 medium base infrared lamp to deliver silent heat to the room (lamp not included). It is rated type IC for ceilings insulated to r-40. It easily installs using the included adjustable hanging brackets. It provides exhaust capacity for rooms of approximately 70-Square-Feet. This model features a 4-Inch metal duct with back draft damper. Housing size: 8-1/4-Inch wide-by-8-Inch deep-by-5-7/8-Inch high.

• Exhaust fan with heat lamps' grill measures 10" wide x 10" deep, with housing measurements of 8" long x 8" wide x 5-7/8" deep
• Operates at 70 CFM at 3.5 sones and comes with a low-profile, white polymeric grill and one-piece polymeric blower wheel
• Uses two 250-watt maximum type R-40 medium base infrared lamps (lamp not included) for just the right amount of silent heat
• Protects against back drafts with 4" round metal duct connection collar and damper
• Fan is UL-listed, HVI 2100-certified, and rated Type IC for ceilings insulated to R-40
• It easily installs using the included adjustable hanging brackets
• Uses one 250-Watt maximum type r40 medium base infrared lamp (lamp not included)

User questions & answers

Question:	Can ak927 be wired to 3 toggle switch so switch 1 turns on only one lamp, switch 2 turns on only the other lamp, & switch 3 turns on only the exhaust
Answer:	No it does not, and I wouldn't buy this bath fan. It is very loud. I'd spend a little more and go for the quiet.
Question:	Can I use the fan without the heat lights being on
Answer:	Yes, it plugs in to the outlet that is wired into the ceiling mount for this model.
Question:	What is the draw wattage of the fan only- i'm using a honeywell timer/scheduler that has a max of 300 watts, and i want to have a heat lamp also. i ne
Answer:	Yes but if you don't use a paint that's made for plastic, it will clog with dust easily.
Question:	How do you remove the old air king exhaust fan from the ceiling
Answer:	10 1/2" X 11 3/4" but it is not square, the corners have an approximate 2" radius.

Product description

The Air King deluxe combination heater series brings warmth and comfort to your bathroom. With an Air King deluxe combination heater, when you step out of the shower, you step into soothing warm air. The deluxe combination heater provides instant heat to the specific location. This heater will instantly make your home a more comfortable place, providing the perfect solution for bathrooms in need of extra warmth. HVI 2100 certified with the switches and wall plate included. The 1500-Watt heater provides over 5000 BTU's of heating power. It easily installs using the included adjustable hanging brackets or through the mounting tab keyhole slots. The AK965 is a deluxe combination heater, exhaust fan, light, and night light. Uses a 100-Watt maximum incandescent bulbor a 26 watt CFL bulb, and a 7-Watt nightlight bulb (bulbs not included). The frosted moonstone glass lens diffuses light throughout the room and will not yellow or become brittle over time like most plastic lenses. A 4-Inch metal duct connection collar with a back draft damper protects against drafts in the room. The heater, exhaust fan, light and night light can be wired to operate separately. Specifications: 15.7-Amps. It provides 70-CFM of ventilation at 3.5-Sones with an exhaust capacity for rooms approximately 70-Square-Feet. Housing size: 15-3/8-Inch wide-by-9-Inch deep-by-6-1/2-Inch high.

• Powerful 1500-Watt heater provides 5000 BTU's of heating power
• Easily installs using the included adjustable hanging brackets or through the mounting tab keyhole slots
• Frosted moonstone glass lens will not yellow or become brittle like many plastic lenses
• Switches included with unit
• 1-Year parts only warranty

User questions & answers

Question:	I have 3 questions: 1)Which model is this? One type is CFL and the other is incandescent? 2) Is the CFM 60 or 70? 3) what does the switch look like
Answer:	yeah I have it wired like that
Question:	My unit has failed and is making a burning smell. Are there any provisions for service available
Answer:	Sure. It's easy to wire the lights and fan on separate switches. Just be sure that both sides are on the same circuit and either a) the hot side powering the lights also provides power to the heat sensor switch that will start the fan if the lamps get too warm without the fan on or b) there is an always hot lead going to the heat sensor switch for the fan.
Question:	This description says the unit color is yellow, but the picture is white. Can you please tell me what the actual color of it is
Answer:	Uses 1 250 w bulb max
Question:	Is the switch included with this model a four in one switch for the four different functions
Answer:	What's above the fan, attic or the next story? If attic, the best way is to go above and remove the nails or screws from the stretchers (like the telescoping support that goes between joists to hold an octagon box or a new-work recessed light fixture.) The alternative is to hope you have some room above the fan box to force it up high enough to break things free. You may be able to lift it high enough to clear the ceiling and overcome the friction to slide to one side and then cut the stretchers on once side, slide the other way and cut the other. However, if the fan was installed in a more secure fashion, you will have to make a big hole in your ceiling. Don't forget to turn off the power to that circuit first!

Product description

The Air King 9375 30-Inch 1/3-Horsepower Industrial Grade Oscillating Ceiling Mount Fan features a motor that is 3-speed, 120-volts, 1-phase, totally enclosed, ball bearing, permanently lubricated with a permanent split capacitor. Air King industrial grade fan components allow the freedom to customize your needs and reduce your assembly time and cost. This fan produces CFM's of 8,780, 7,480 and 5,570 (High, Medium, Low) and RPM's of 1,075, 925, 800 (High, Medium, Low). The 9375 comes with a rear mounted pull cord switch and a black, 10-foot, 3-conductor SJT type power cord. Blade, guard and mounts are powder coated steel. This fan is both ETL and OSHA compliant and has been tested in accordance with AMCA standard 230.99. The 9375 measures 33-1/2-inches long by 29-inches wide by 36-3/4-inches high and weighs 44.9-pounds. The Air King 9375 30-Inch 1/3-Horsepower Industrial Grade Oscillating Ceiling Mount Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.This product is not compatible with and will not work with any controller or dimmer.

• 30-inch powder coated metal blade
• 3-speed, 1/3-Horsepower, 120-volt, 1-phase, totally enclosed ball bearing motor
• Rear mounted pull cord switch and a black, 10-foot, 3-conductor SJT type power cord
• ETL and OSHA compliant and has been tested in accordance with AMCA standard 230.99
• Comes with a 1-year limited warranty
• 8780 CFM

Product description

Cool and Circulate Air at Work

The Air King 9020 Industrial Grade Wall Fan is perfect to cool and circulate air in industrial or commercial settings including, loading docks, warehouses, churches and health clubs. This fan is mounted to a wall to save floor and table space. The 9020 keeps the power cord off the ground for high traffic areas. With a powerful motor and steel construction, this fan is the perfect solution for instant air circulation and cooling. Air King added a powder coated finish to the blade guard and mount for years of optimal performance. This unit is tested in accordance with AMCA standard 230.99, meets the made in America requirements of ARRA and is ETL and OSHA compliant. It comes with a 1-year limited warranty to protect against defects in materials and workmanship.

Adjustable Settings with a Powerful Motor

Air King equipped this model with a powerful 3-speed, 1-phase motor and a permanently lubricated permanent split capacitor. The motor is rated at 120-volts, 1/6-horsepower and has 3-speed settings for cubic feet per minute of 3670, 3330, 2940 on high, medium and low and rotations per minute of 1500, 1310, 1050 on high, medium and low. The motor is rated for 1.6, 1.3 and 1.1 amps and 184, 155 and 130 watts. The industrial grade fan motor means high velocity air circulation with little to no maintenance. This unit features a pivoting head to direct airflow and an easy mount for fast installation. Other features include a rear mounted pull cord and powder coated, steel blade guard. The blade guard, motor housing and mount are finished in black. This unit includes a 9-foot, 3-conductor SJT type power cord and measures 26.5-inches (L) by 16.5-inches (W) by 29.5-inches (H) with an 26-pound weight.

About Air King

Air King offers a full line of industrial grade and commercial grade air circulating solutions. Whether it's for an industrial setting such as a manufacturing plant, warehouse or factory or a commercial setting such as an office, school or hospital, Air King has the perfect solution for you. Air King is known for its powerful motors that last for years.

• 20-Inch powder coated metal blade
• 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed ball bearing motor
• Rear mounted pull cord switch and a black, 9-foot, 3-conductor SJT type power cord.Frequency:60 Hz
• ETL and OSHA compliant; Tested in accordance with AMCA standard 230.99
• Up to 3670 CFM.Maximum Sound Level:62 dB
• 3670 CFM

User questions & answers

Question:	Can this fan be mounted in the corner? Also, is the mounting hardware in the box
Answer:	1) Don't know but there is no difference between CFL or Incandescent. Both bulb receptacles (nite lite and regular lite) will accept both types of bulbs. The switches included are just on/off switches so there is no preference there either (if there was a dimmer then it would make a difference). The system is designed to supply 120VAC to all 4 receptacles over a 12 AWG (20Amp) wire - it doesn't care if there is an incandescent, LED or fluorescent screwed in. the nite lite receptacle is rated for 28W maximum and they don't recommend going over 60W for the main bulb - these are ratings for incandescent bulbs obviously.2) Specifications have the CFM at 60. I didn't measure:)3)There are two switch assemblies included and each switch assembly has two switches for a total of four switches (nite lite, regular lite, heater, exhaust fan). These switches will fit into a 2 gang electrical box and each assembly has a footprint very similar to a regular duplex outlet with a rocker switch on top and bottom. You need a 12/2 (ground, black, and white wires) cable coming from the electrical service panel into the box and you need either two '12/3' or three '12/2' cables going from the box to the Airking. this is because you need a common, a ground, and four hot wires going from the box to the Air king. As far as the wiring inside the airking ... Let me warn you - it's designed for man strength hands that are also toddler sized. Very tight fit to get all those wires nutted and connected inside the Airking. Also, prior to doing the wiring make sure your exhaust fan wheel is tight (it shouldn't rattle). It's easy to tighten before the wires are in but not so easy afterwards. One final note, this device requires it's own 20A circuit - can't put it on the same branch as your vanity lights or outlets. Hope this helps.
Question:	If installed can I turn this fan left and right
Answer:	I have only had to contact amazon once about a problem and it was handled quiet well. I was very pleased with the service. You need to contact the company first and give them a chance to help you, if they don't then call amazon. You should e mail the Co through amazon.
Question:	How well would this fan work in a 20'X25' home gym? Thanks
Answer:	My Air King is White as in the picture. I don't recall the mention of yellow in the description when I purchased mine. Function was most important to me and I'm well pleased with it's operation.
Question:	Can this fax be mounted on the ceiling
Answer:	Bought this last year. The switch is not included. But they are cheap and any electrician should be able to install. If you are replacing an existing exhaust you may need to add wires to use all four functions.

Product features

20" Wall Mount Fan

Motor: 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed, ball bearing, permanently lubricated, permanent split capacitor

Controls: Rear mounted pull cord switch

Power Cord: Black, 9', 3-conductor, SJT type

Coating: Blade, Gaurd, and Mounts are powder coated steel

Product description

The Air King Commercial Grade Oscillating Wall Mount Fans are ideal for workshops, health clubs, stores, classrooms, offices and other areas where there is limited floor or table space. Model 9018 is an 18-Inch, 5-blade oscillating Wall Mount Fan. The motor is 3-speed, 1/20 HP, 120V, 1 phase, permanently lubricated with a permanent split capacitor. Controls are front mounted - rotary and pull cord switch. Power cord is a white, 7 foot, 3 conductor. SPT-2-R type. Metal front grill with impact resistant plastic rear grill and chemical resistant polypropylene blade. Oscillation is 90 degrees and can be locked in non-oscillating position. CFM 1970, 1520, 1170 (High, Medium, Low) RPM 1000, 790, 590 (High, Medium, Low) Amps 1.1, .73, .54 (High, Medium, Low) Watts 114, 85, 63 (High, Medium, Low). ETL and OSHA compliant, Tested in accordance with AMCA 230.99. Shipping weight: 10.9 Pounds. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals, Air King has the perfect solution for you. Quality, energy efficient and durable Air King products are always a great choice!

• 3-Speed, 1/20 HP, 120V, 1 phase, permanently lubricated, permanent split capacitor motor
• Constructed of metal front grill with impact resistant plastic rear grill and chemical resistant polypropylene blade
• Front mounted rotary and pull cord switch and White, 7-foot, 3-conductor, SPT-2-R type power cord
• 90 degree oscillation or can be locked in non-oscillating position
• ETL and OSHA compliant; Tested in accordance with AMCA standard 230. 99
• 1970 CFM

User questions & answers

Question:	Once the fan is hung high on a wall, can it then be moved down or does it only below "straight" across
Answer:	The provided bracket probably won't give you enough depth for a corner mounting. Where I installed 2 of these I moved them out about 3 feet from the corner and that worked well. Bracket is included and top hanger bolt, but you'll need your own hardware to affix to the wall structure.
Question:	Will it mount on the ceiling rather than the wall
Answer:	Yes. If you fasten the triangular fan mount to a vertical member such as an upright barn post (use 5/16" or 3/8" lag screws 5" long), the up-down axis is controlled by two large thumbscrews, one on either side of the semi-circular fan mount. The fan pivots left-right on a heavy bolt; to adjust the left-right direction of the fan, loosen this one bolt, swing the fan left or right, and re-tighten the bolt.
Question:	How loud
Answer:	Perfectly. This is what I use. It is loud, but moving a lot of air can be loud. it is awesome. I would buy again in a second. Nice fan. We have in a home gym that is maybe 15 X 15
Question:	How many watts or amps
Answer:	Hello! Yes this fan can be mounted to a ceiling or wall. The provided bracket is built for either type of installation. The only thing not provided is the three lag bolts to secure fan, but the instruction booklet tells you what size to buy. I know they were 2" long and think they were 5/16" diameter? Good luck and you will be glad you purchased this fan.

Product features

Air King 9018 Commercial Grade Oscillating Wall Mount Fan

• Grilles/Guards: Powder coated steel front grill with impact resistant plastic rear grill
• Motor: 3-speed, 1/20 HP, 120V, 1 phase, permanently lubricated,permanent split capacitor
• Fan Blade: Chemical resistant polypropylene blade
• Cord: White, 6', 3-conductor, SPT type
• Switch: Front mounted rotary and pull cord switch
• Oscillation: 90° or can be locked in non-oscillating position

Product description

The Dempsey modern Low Profile ceiling fan with mass appeal will fit flawlessly in your home's contemporary interior design. The beautiful, clean finish options work together with the high contrast of angles throughout the design to create a look that will keep your space looking current and inspired. The LED light ceiling fan has fully-dimmable, high-efficient LED bulbs that give you total control over your lighting. The Dempsey fan features 13-degree blade pitch optimized to ensure ideal air movement and peak performance. This reversible fan comes with reverse rotation fan blades that keep the rooms in your home feeling cool during summers and warm during winters. Ideal for use in rooms or spaces with low ceilings less than 9’ in height.

• MODERN CEILING FAN: The contemporary Dempsey fan comes with LED light covered by cased white glass that will keep home interior current and inspired; Measures 52 x 52 x 12.27 Inch
• MULTI-SPEED REVERSIBLE FAN MOTOR: Whisper Wind motor delivers ultra-powerful airflow with quiet performance; Change the direction from downdraft mode during the summer to updraft mode during the winter
• LED LIGHT KIT: Energy-efficient dimmable LED light bulbs let you control the lighting and ambiance of the living space; The long lasting bulbs have longer lifespan than traditional bulbs
• UNIVERSAL HANDHELD REMOTE: Adjust the brightness of light and speed of the brushed nickel ceiling fan with ease from anywhere in the room
• ROOM PLACEMENT: Indoor fan is designed to be used in rooms with low ceilings, the low-profile housing fits flush to the ceiling; Ideal fan for bedrooms, living room, kitchen, and lounge

Product features

Remote Control

The included handheld remote allows you to control your ceiling fan speed and dim the light from wherever you are in the room. Wall mounted cradle included so you always know where the remote is.

Low Profile

Specially designed low-profile housing fits flush to the ceiling, making it ideal for rooms with low ceilings less than 9 feet.

Indoor Use Only

This ceiling fan is ETL rated for indoor use only, making it ideal for spaces like living rooms, bedrooms, home offices, and kitchens.

LED Light Bulb

Hunter’s energy efficient LED light bulbs come included and ready to install.

Why Hunter?

Since inventing the ceiling fan in 1886, we’ve put years of research into new designs, ground-breaking innovation, and technological advances while continually delivering the Hunter brand promise. From our high velocity SureSpeed fans to the color-controlled Tunable White LED, we continually reinvent the wheel in ways that satisfy our customers.

Product description

The Air King DRLC702 Round Bath Fan with Light is designed to bring style to the home, allowing the exhaust fan to be a decorative element of the room. This unit combines quiet operation with a decorative round grill and a stylish frosted ribbed moonstone glass light lens. The glass lens diffuses light throughout the entire room and ensures a long life without the yellowing that can occur with a traditional plastic lens. The fan features 26-watt medium base energy efficient fluorescent lamps or 60-watt incandescent lights (bulbs not included) to provide excellent illumination and can be operated separately from the fan. Easily install the fan by using the included adjustable hanging brackets. The 4-inch plastic damper insures quiet operation and prevents back drafts from entering the room. UL listed for use over a tub or shower when installed in a GFCI protected branch circuit. This unit features a 70-CFM blower at 4-sone which makes for quiet operation, an exhaust capacity for room of approximately 70-square feet, housing that measures 7.375-inches wide by 7.625-inches deep by 5.875-inches high and is HVI certified. The Air King DRLC702 Round Bath Fan with Light comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

The decorative series of air king exhaust fans are designed to bring style to the home, allowing the exhaust to be a decorative element of the room. With multiple models and finishes, air king has the unit to enhance almost any decor. The round fan with light combines quiet operation with a decorative round grill and a stylish frosted ribbed glass light lens. Air king's decorative series of exhaust fans with light feature a glass light lens to ensure long life without the yellowing that can occur with a traditional plastic lens. The frosted ribbed glass light lens diffuses light throughout the entire room. The exhaust fan and light can be wired separately and the unit is easily installed using either the included hanger brackets or housing mounting tabs. Two 60-Watt incandescent lights (bulbs not included) provide excellent illumination. A plastic damper protects against back drafts and ensures quiet operation. This unit has a 70-CFM blower at 4.0-Sone. UL listed for installation over a tub or shower when installed on a GFCI circuit. It provides exhaust capacity for rooms of approximately 70-Square-Feet. Housing size: 7-3/8-Inch wide-by-7-5/8-Inch deep-by-5-7/8-Inch high. This models grill is finished in nickel.

• Decorative bath fan comes with a stylish grill (13-1/2" diameter) in nickel finish and ribbed frosted glass light lens, giving your bathroom a sophisticated and illuminating glow, along with an even distribution of light
• Operates at 70 CFM at 4.0 scones, and comes with a 4" round duct collar with damper for quiet operation and protection against back drafts
• Exhaust fan and light can be wired to function separately
• Easy installation with included adjustable hanging brackets or housing mounting tabs
• Uses two 60-watt maximum standard, type A19 medium base bulbs (not included)
• Bath fan with light designed to bring style to your home
• 70-CFM blower at 4-sone for quiet operation

User questions & answers

Question:	What is the diameter of the glass
Answer:	The fan can be tilted downward. I have my fan attached to the wall at about 74 inches, and tilted downward so that the air blows across the bed. My ceilings were too low for a ceiling fan, so this is my alternative. It works very well.
Question:	We purchased and installed this fan over a year ago and it works Great! Fan is too loud for us, is there a quieter fan that could be installed
Answer:	No, it is only for a wall, but it works great.
Question:	Can leds be used instead of flourecent or incandescent bulbs? leds provide better lighting & are more energy efficient so i'd rather use them if okay
Answer:	On low speed it's not loud But obviously on high it's pretty loud.It is a good quality commercial piece well made
Question:	Where can I find a replacement globe
Answer:	the 3 positions are as follows high 0.46 amps / 51 watts medium 0.37 amps / 44 watts low 0.32 amps / 39 watts

Product features

Decorative Exhaust Fan Series

• Moonstone glass light lens disperses light throughout the room
• Utilizes two medium base screw in type lamps (lamps not included). Accepts up to 15W LED, 26W CFL or 60W Incandescent type A19 lamps.
• Easily installs using the included adjustable hanging brackets
• 4" Plastic damper protects against backdrafts and ensures quiet operation
• All functions can be wired to operate separately.