10 best heat underfloor heatings

Product description

Note: during installation, it is necessary to avoid enclosed space, and the place with floor heating pad should be kept 5cm away from the table and chair. These two situations will lead to heat loss.

Product details:

Dimensions: 20 feet long by 18.3 inches wide

Area: 30 square feet

Output: 150W / M

Cable construction: Double conductor

Grounding type: 100% armored grounding range

Certification: CE and RoHS

Package description:

30 square feet heating floor heating line * 1

Y-603h WiFi thermostat * 1

2.5m power cord * 1

2m power cord bushing * 1

• 【High quality assurance】 With CE and ROHS certification, double conductor heating wire and drain wire with aluminum sheath can ensure ultra-low EMF. Includes floor sensors, compatible with most floor heating thermostats.
• 【Wireless temperature control】 With y-603h WiFi temperature controller, simple and remote temperature control, heating time is faster than 10W / square foot, faster to reach the preset temperature.
• 【Technical details】30 sqft(20 feet long * 18.3 feet wide), 15 W / square foot, including 2.5 meters of power cord, external sensors and 2 meters of power cord bushing.
• 【Easy to install】 The heated floor mat has a fully self-adhesive bottom pad, which can be laid easily, and has complete and comprehensive installation instructions for your convenience. Easy to install into your shower room, kitchen, wet room, living room, greenhouse, etc.
• 【Wide range of application】 It is suitable for residence, office apartment and senior living facilities. It is installed under tile, stone, marble, laminate and engineering wood floor. It can be installed as main or auxiliary heat source to bring warm and comfortable environment.

Product description

Combine the beauty and durability of tile with the comfort of a radiant electric floor warming system to bring a touch of luxury into any room of the home.

• Schluter DITRA-HEAT electric floor warming system incorporates uncoupling crack prevention technology that can absorbed small movement of the substrate and prevent tile from cracking.
• Cables can be placed wherever heat is desired for customized heating zones, and no levelling compounds are required, which makes for a quick and easy installation.
• With the proven technology of DITRA-HEAT uncoupling membrane incorporated in the design, the Heat Kit provides the ideal solution for bringing comfort and floor warming to any tiled floor.

Schluter 21 SqFt 120V Ditra Heat E Kit Includes :

• DHEHK12021 Heat Cable
• DHERT102/BW Touchscreen Programable Thermostat
• 34.4 SqFt of Ditra Heat Membrane.
• Nuheat MatSense Pro electric fault indicator (loudmouth monitor)
• Suntouch plastic 3/8" x 1/2" U-notch cable trowel

• DHEHK12021 DITRA HEAT CABLE - (120v 21 sq ft) Specially desiged for integration with the Ditra-heat uncoupling membrane in interior floor warming applications. The cables can be installed without returning to the termostat and produce virtually zero electromagnetic fields.
• TOUCHSCREEN PROGRAMMABLE THERMOSTAT - The DHERT102/BW Ditra Heat thermostat is designed to control radiant floor heating cables. This thermostat has six programming periods per day, a set-up wizard and an energy log. It has a built-in 5 mA ground fault circuit interrupter (GFCI) and works with 120-Volt and 240-Volt cables.
• 34.4 SQ FT DITRA HEAT MEMBRANE - polypropylene membrane with a cutback stud structure and an anchoring fleece laminated to the underside. The membrane is designed to secure the DITRA-HEAT-E-HK electric floor heating cables and provide uncoupling, waterproofing, vapor management and support to ensure a long lasting installation.
• EASE OF INSTALLATION: The Heat kit includes all the components you need to build a long-lasting and reliable heated floor system. Practical design of the components makes the installation quick and easy.
• SAFETY: Includes either Nuheat MatSense Pro OR SunTouch Loudmouth monitor electric fault indicator. This device sounds an alarm if the heating wire is cut or damaged, identifying a problem with the installation before the heat wire is tiled over. Suntouch plastic 3/8" x 1/2" U-notch cable trowel is designed specifically for heat cables installation and eliminates the risk of damaging the heating cable while applying mortar.

User questions & answers

Question:	Does this dhekrt12016-cmf kit by global trade include a floor sensor? ideally 2 sensors
Answer:	Hello, its about 1/8" diameter. Heatizon Systems Team
Question:	How long is the cable
Answer:	The hard part about this answer is that it depends on how much you use it. To figure it out you would need to find out the kw/h price from your electric company and then depending on what size system you get (for 140sqft) you will use about 1.2 kw to 1.8 kw while it is on, so IF you're rate is .08 kw/h, it would cost you about .10 - .15 per hour you use it. Hopefully that helps.
Question:	how thick is the membrane
Answer:	Yes this particular system is designed for 240V
Question:	Can this replace the heat in a small powder room bathroom
Answer:	This cable being a dual parallel conductor and shielded has zero EMF. Regarding EMF, this is the current conclusion of WHO after 30 years of research about low level EMF exposure. - "WHO concluded that current evidence does not confirm the existence of any health consequences from exposure to low level electromagnetic fields" -https://www.who.int/news-room/q-a-detail/radiation-electromagnetic-fields
Question:	What is the cable diameter
Answer:	Hello, this product has only been designed for indoor floor heating, not outdoor.
Question:	What is the annual cost for a 140sqft system
Answer:	Hello, you can set the thermostat between 41F and 104F, a heated floor would usually run between 80 - 86 deg F. Yes once the floor reaches your selected temp it'll remain constant at this temp.
Question:	Can this be wired to a 240v 2 wire with ground circuit
Answer:	Hello, as with most floor heating cable systems, the LuxHeat system does require a mortar/cement or leveling compound to cover the cables. This provides a heatsink for the cable, and promotes even heat distribution throughout the floor. Without the mortar or leveling compounds to cover the cables, the system will overheat.
Question:	Emf levels? Does it have an armored dual core cable
Answer:	Hello, the LuxHeat heating system is UL approved for floor heating only, I wouldn't recommend it for a counter top. There are other self-regulating heat-tape options that would be better suited for that application.

• 【HIGH-QUALITY PRODUCT】- Product Size: 40 sq.ft; Mat Width: 20"; Power Supply: 100-120 V; Min. Bending Radius: 30 mm/1.2"; Min. Cable spacing: 8 cm/3.1"; The cable of this heated floor mat is flexible and tough to use. Our product has passed tests of UL, CE, VDE, RoHS.
• 【SAFE HEATING CABLE】- Max. Exposure Temperature: 90℃/194℉; The heating cable is processed with several layers: PEP insulation, aluminum cable ground connection, and PVC protective cover. All these ensure its high efficiency and safety.
• 【THERMOSTAT & ALARM】- This kit includes a thermostat, an accurate temperature sensor, and an alarm. The thermostat can display time(H/M/S/W), room temperature(℉), room humidity, floor heating temperature, lock. Besides, it can switch manual mode or preset function. With over & low-temperature protection.
• 【QUICK TO INSTALL】- This heating mat is designed with a self-adhesive mesh surface, and can be attached to the ground easily & firmly. No need to buy expensive tools(boilers, circulators). And the mesh can be cut by scissors to suit different places.
• 【DIVERSE USE SCENARIOS】- Continuously provide heat and create a warm room for your family. Compatible with most types of floors, like ceramic, porcelain tile, stone, granite, marble floors, laminate, engineered wood, vinyl floors, etc.

User questions & answers

Question:	Can thos be cut to fit room size
Answer:	No, they have a special termination at the end and the cable can not be cut, it would be useless.
Question:	I'm looking for something to put actually under the floor, between the joists. will this work
Answer:	I’m not sure why you would do that, but if you are installing under subfloor NO.
Question:	How hot do the wires get
Answer:	The wires do not get very hot they are insulated also the heat is radiant so when the Floor gets warm it stays warm
Question:	Will this work with peel and stick laminate flooring? I want to put this in truck camper
Answer:	Stick in peel is the glue so it will not stay glued to it and it will want to move it is only good with ceramic tile
Question:	I need 24" x 60".. Can I route the last one feet wire along the side to increase the width to 24" and keep the length to
Answer:	You can loosen the heating element from the mesh and put along side the mat keeping it at 3" spacing.
Question:	I am planning to install wooden floor (hardwood or laminate) in my bathroom. Can I use this system to heat wooden floors or is is for tiles only
Answer:	The floor heating system can be installed under laminate or engineered wood floors, but not a traditional wood floor in which you are nailing down the floor because of the risk of putting a nail through the wire. Regardless of the flooring type, the floor heating system must be completely embedded in a polymer modified cement based mortar.
Question:	I have a concrete slab that I would like to add electric floor heating and tile over it. How do I avoid moisture build up with this product
Answer:	You need to seal your concrete floor! Theres a great product on amazon here that gets down into concrete and seals up everything--it even pushes dirt and moisture out as its sealing! and you just spray it on. Its advertised to block radon, but its all the same different of sealing concrete (will make moisture barrier, block radon, etc.) I think its just called "Radonseal" and its in a big bucket; you'll also need a 1 gallon sprayer, they run about ten bucks. I would seal it before installing this product, as you'll get a lot more out of it. You'll still want to cover it with something so it can distribute its heat (like put in thinset or something like that) it doesn't have to be fancy tile. I did mine in thinset and threw a rug over it to make a warm place for my pets while i'm at work.
Question:	Can this be used when installing a drop-in tub to keep bath water warm
Answer:	No, but Kohler has a tub that has a built in heating element on the portion where you lean up against. I don't know how well it would heat the water, but I bet it would be nice.

Product features

Floor Heating Mat

The Electric Floor Heating Mat consists of a mat with the cable heating elements pre-spaced 3" within the mat. Simply unroll the floor heating mat with the cold lead running up the wall to the electrical box. These heating systems are ideal for rectangular or square areas with right angles. You can manipulate the mat to fit the desired heating area by using the turning techniques shown below. The white fiberglass mesh may be cut to flip and turn the mat. The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat with floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volts, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• A mode controls the ambient air temperature
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system. Connect the system leads to the monitor prior to installation. The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar. If the alarm sounds, stop work and consult the operation manual. We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

ADHESIVE BACKED MAT

This heating mat has double sided tape to offer an adhesive backing that make installation a breeze. Simply fit the mat to your floor, then peal of the tape and adhere to the floor. This greatly reduces the installation time and gets you on your way to enjoying your heated floors.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Quick to Heat

The cable consists of three parts: PEP insulation, the ground connection, and PVC protective cover. It is quick to heat and can reach up to 194℉ temperature.

Thermostat & Alarm

As an upgrade version, we will offer you a digital thermostat and an alarm device. The thermostat can display time, temperature, switch mode, and has several protection settings.

Install with Guides

The installation of this electric heat floor mat is not complicated, and we will offer you all accessories. Have two ways to install, please check the instruction.

Cuttable Heat Mesh

The floor heating mesh can be cut by scissors to suit different room spaces. Notice: The heating cable cannot be cut!Watch the guide picture for detailed information.

Floor Covering Types

This radiant heat mat is compatible with many types of floor coverings, such as ceramic, porcelain tile, stone, granite, marble, laminate, etc.

Wide Use Places

Our product is suitable for both home & commercial use, like the living room, bathroom, hotel, sauna house, etc.

40 sqft Floor Heating Mat

This is an industrial-level floor heating mat used for floor warming in the living space, especially in the winter or cold areas. It is easy to install and safe on use with strict processing and professional design. Our floor heating mat has passed tests of UL, CE, VDE, RoHS. Better than those regular products on the market.

Product description

The smaller DITRA-HEAT Kit by Schluter-Systems contains everything you need to install your floor heating system:

• 1 DITRA-HEAT Cable - 26.7 sq ft
• 5 DITRA-HEAT Uncoupling Membrane sheets (needed to install the cable) totaling 43.1 sq ft
• 1 DHERT102/BW Touchscreen Programmable Thermostat
• 2 Sensor Wires

• Bring comfort and a touch of luxury to your space with an electric floor heating system!
• DITRA-HEAT cable is thin, durable, and energy efficient. (Input: 120V, Output: 12.75W/SqFt)
• Heats 26.7 square feet (Contains a 88 ft spool with 10 ft armored power lead)
• Easily snaps into uncoupling membrane, no clips or fasteners required
• Kit includes cable, uncoupling membrane, programmable touchscreen thermostat, 2 floor sensors

User questions & answers

Question:	Hi i need the 10.7 ft cable and 3sheets and touchscreen thermostat is that available and how much
Answer:	They do roll but from what I heard on 80 day obsession that is because you need a heavier band or to use 2 at once. My green one broke right away but otherwise they have been fine.
Question:	Can this product be installed under vinyl sheet or vinyl plank flooring
Answer:	If you mean yoga mat then no but it would slide on tile or wood and maybe like a gymnastics mat type of thing. I think they would get stuck on a yoga mat. They are not the same sliders that are in 80 day obsession. These ones have a hard plastic bottom.
Question:	how warm to you set floor temp and how long does it take to heat up
Answer:	Yes plastic on one side.
Question:	How many amps does this draw
Answer:	12"

• 30 Sqft Cable with Digital Programmable Thermostat, Electric Floor Heat Warming System
• Includes Plastic Cable Guides and Installation Monitor
• 120V, 3.0 Amps, 360W, 12 Watts/Sqft, UL Listed for USA and Canada
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 year Warranty

User questions & answers

Question:	How many linear feet does this include
Answer:	A 40 sq. ft. cable system is 160 linear feet of wire.
Question:	Is the thermostat's light always on? Trying to decide if we will put the box in our bedroom but don't want any light coming out of it at night
Answer:	No the light only turn on when you push buttons on the thermostat
Question:	What is the wattage (or amps) specification for 200' (50 sq ft) of heating wire
Answer:	A 50 sq. ft. 120V cable system is 5.0 Amps and 600 Watts.
Question:	Can this be installed under the subfloor between joists? I do not want to rip up my existing tile and have basement access
Answer:	No, our floor heating systems are to be installed on top of the subfloor and must be embedded in a polymer modified cement based mortar.

Product features

Floor Heating Cable

The Electric Floor Heating Cable consists of a spool of heating cable.  Simply run the cable 3" apart across the area to heat using the cable guides to secure to the floor running the cold lead up the wall to the electrical box.  These heating systems are ideal for odd shaped areas or to heat around objects.  The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat and floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volt, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system.  Connect the system leads to the monitor prior to installation.  The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar.  If the alarm sounds, stop work and consult the operation manual.  We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

CABLE GUIDES

Designed for fast installation of the the heating cable, simply loop the floor heating cable around the guide as you lay the cable system across the subfloor.

Secure the cable guides according to the planned layout using screws, nails, adhesive or glue approved for use with the given subfloor.  The heating element should be spaced 3" apart across the area to be heated.  Cable guides should be run perpendicular to heating cables.  The heating cables should have a minimum distance of 2" from walls and objects. Spacing between cable guides should not exceed 36" in distance.  Secure the heating element to cable guides by wrapping the wire around the stud.  Maintain moderate tension of cable throughout installation.  Do not twist heating element and keep the minimum bending radius of the cable to 1".

Cable guides are 12" long and can be cut to length. Includes enough cable guides for cable heating system.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Product description

THERMOSTATS FOR COMFORT HEATING

The Touch Screen Thermostat is an attractive and modern controller for radiant floor heating, with many unique features design to increase ease-of-use and save energy. Intelligent and intuitive, this thermostat is here to make your life easier and your home more comfortable.

It detects the indoor temperature and displays the corresponding value. This device automatically regulates the heating output on 120V/240V in accordance with the set point and the room temperature. The clock controls the 7-day user schedule. It is accurate and sensitive with high reliability and high performance.

Programmable Thermostat with Floor Sensor and GFCI.

GFCI: Class A-5mA; Output Load: 15Amp., resistive

Comply with the requirements of the Standard(s) for Automatic Electrical Controls for Household & Similar Use Part 1 General Requirements (CAN/CSA-E60730-1) & Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Temperature Sensing Controls (CAN/CSA-E60730-2-9) and are identified with the cETL Listed Mark.



package include: thermostat and installation instructions BEST SUITED FOR:

✔ Residential homes, Office apartments and Senior living facilities

✔ Under tile, stone, marble, laminate and engineered wood floors



FEATURES & BENEFITS:

✔ Compatible with most radiant Floor Heating Systems

✔ c UL us Listed - Can be used in Wet room applications

✔ Dual Voltage - Connects to 120v and 240v circuits, powers 120v and 240v rated heaters

✔ 7-Day Program, pre-set program can be customized to suit one’s lifestyle, ensuring Personal Comfort and Affordability

✔ Dual sensing (Air & Floor) - Maintains desired ambient temperature when set to ROOM, or the Floor temp, when set to Floor

✔ Dual setting maintains the Air temperature as well as maintaining minimum and Maximum Floor Temperatures through limit function

• This Underfloor Radiant Heating thermostat works with both 120VAC / 240VAC, 50/60Hz. The maximum current for either voltage is 15A. Maximum Power Wattage: 120V/ 1800W or 240V/ 3600W, Comply with the requirements of the Standard(s) for Ground Fault Circuit Interrupters (CAN/CSA-C22.2 No. 144.1) and are identified with the cETL Listed Mark.
• With Floor and Air Sensor, build in GFCI and GFCI function test. There is a Ground Fault Circuit Interrupter GFCI inside the thermostat. It is used to protect occupants from electric shock if there is a short circuit, After installing the thermostat, test this function to ensure proper and safe operation. It can also prevent some electrical fires and reduce the severity of others interrupting the flow of current.
• If the GFCI is tripping, it means that there is an electricity leakage detected. Please shut down your main power and re-connect the wires. Make sure there is no electricity leakage up to 5mA, or the thermostat will alarm for safety.
• Large LCD digital display with backlight,easy to read in various lighting conditions, 7-day programmable line volt thermostat for elect. 7 day program scheduling helps to provide maximum comfort, while reducing operating costs.ON/STANDBY switch enables thermostat shutdown at end of heating season.
• Universal compatibility with existing radiant floor heating systems.The thermostat is UL listed, with self-testing Class A GFCI (Ground Fault Circuit Interrupter) to protect against risks of electrocution caused by current leakage. Load capacity of 15amps. 5 year limited warranty.

User questions & answers

Question:	Does this work with Easy Tile floor system
Answer:	Yes the model number for the center strip is orbit 54035 thank you

• TDP Heat Lamps with large head size as far-infrared heating lamp by the U.S. FDA.
• The heat produced by our Infrared heat lamp does not utilize high heating temperature, yet still allows excellent Infrared penetration through the skin.
• TDP works with coil heat and a mineral plate (no light bulb needed). The Mineral Plate (6.5" in diameter, life span of up to 1,500 hrs) emits Far Infrared Rays when heated.
• Please wait at least 10-20 minutes for heat. Typical treatment sessions should last a minimum of 40 min per area.
• 110V Detachable head - simply unplug the cord that connects the head and the main frame when replacing.

User questions & answers

Question:	can I use the light bulb only? I suppose this light have two function right ? Where this light made
Answer:	To the best of my knowledge, this lamp is not like you would expect with light bulb it has a mineral plate and a heating device, the minerals once heated starts the process of healing, or relieving of pain. I have had, up to now, very good healing and pain reduction with far-infrared technology. I am no doctor, and can only speak for my results. There are areas of the body and certain ailments that the lamp might not be able to relieve. Please do extra research or contact your doctor, to see if it is appropriate for you. Another thing you might want to try, is contact a doctor who might be using this technology, such as a Chinese medicine doctor, or chiropractic doctor. Good luck.
Question:	Does this light shine red when switched on? No light coming from mine at all
Answer:	No light coming from mine at all
Question:	Will a 250watt bulb of my own work in here
Answer:	No.
Question:	I dont have a red light, it heats up with no red light? is this normal Mine does not have light. There is are 2 tiny light tablets, what are they for
Answer:	Dear Customer,As noted in our product details, the "TDP works with coil heat and a mineral plate (NO light bulb needed)", so there is no light emitted from the lamp.If you are referring to the two fuses included with your order, these are replacement fuses in case the working fuses short out. Please note that the working fuses are already situated inside the lamp. Thank you,K.S. Choi Corp.

Product features

THE ULTIMATE FAR INFRARED TDP LAMP FOR MAXIMUM RELIEF

*NOTE: Important: Please make sure to wear light clothing when using to prevent burns. DO NOT USE ON BARE SKIN. 1) Please note that the heat lamp will take approximately 15 minutes to warm up. After preheating for 15 minutes, please allow an additional 5 minutes for the temperature to increase. 2) As a general guideline, the distance between the treatment surface and the heating head should be approximately 8-10 inches. Actual positioning of the TDP head may be adjusted to reach the desired level of heat. Do not position the lamp head too close to the skin. 3) A minimum of 40 minutes per treatment session on the targeted area is recommended. Please note that the treatment time for a given session may vary depending on the condition being treated. 4) The heat lamp only provides warmth for therapeutic heat treatments. Please do not expect a higher temperature range as higher temperatures may cause the skin to overheat and burn. Higher temperature ranges will not increase the effectiveness of the treatment. Replaceable/detachable head. . Package weight: 21 lbs, package dimension: (23 x 16 x 11) *Please consult with doctor before use.

Timer / Control Panel for Ultimate Control

• Easy to Use Timer
• Power Switch for Off and On Puts you in control.
• Timer goes from 0 mins to 60 mins
• Strong Design and Very User Friendly.

Wide TDP Lamp Head

• Our TDP Head Has a Wide Range for Maximum Effectiveness.
• Metal Face Plate Guard for Protection.
• Built Strong to Last a Long Time.
• 7.8 inches wide head .

Switch out your head anytime

• A Great Plug in and Plug Out Mechanism for our Heads.
• Easy Replacement Methods.
• Just pull out the plug and plug in the new replacement head if needed then your done.
• Specially designed to be made easy to replacement if needed.

• Easy and reliable way to control your floor heating system(s) up to 15A
• Intuitive 7-day schedule makes it simple to program floor heating times to suit your lifestyle
• Dual Voltage 120/240V with built-in GFCI for safety and energy use monitoring
• Thin profile brilliant 3.5 inch touch display with multiple color themes to choose from
• Equipped with comprehensive help screens and programming setup wizard

User questions & answers

Question:	Command Thermostat work without a Probe & if so then how well does it work? Installers in 2004 didn't place a probe
Answer:	I do not know this answer
Question:	What's the maximum watts for this? I am needing one that controls 4500watts
Answer:	3600 Watt at 240 VAC. You may want to explore their SunStst relay C3 in addition to your controller. You can also contact their customer service; very knowledgeable and helpful people.
Question:	Can this replace an Emerson Warm Tiles thermostat
Answer:	As long as the Emerson uses 120V line voltage then this thermostat should work and according to the installation directions for the Emerson it is a line voltage thermostat so it should work.
Question:	Will this work with schluter systems ditra heat 240v cable
Answer:	It should, it is a dual voltage 120/240 VAC controller.

Product features

The SunStat Command is easy to install and is a direct replacement for older SunStat models

Includes one 10k sensor wire

Wiring the thermostat is simple

Works with both mat and cable systems

• Computerized Cut system with 3D scan patterns can be well tailored to suit customer requirements
• Durable and light weight
• Keeps interior at ideal temperature
• Help protect dashboard from cracking and fading
• Portable and Compact (Easy to take or store anywhere)

User questions & answers

Question:	Is this item made in the USA
Answer:	Yes
Question:	How is this quality
Answer:	Haven’t the faintest idea. I’ve never bought a ToughPRO windshield sunshade. Sorry.
Question:	will this fit 2010 toyota tacoma
Answer:	Im not sure I dont own a toyota tacoma
Question:	Do you make products for other car manufacturers? (Chevrolet
Answer:	I am not the manufaturer

Product features

ToughPRO Heat Automation Sun Shade

ToughPRO Sun Shades are custom cut. When properly installed, it will keep the interior of your vehicle at an ideal temperature.

UV Reflect

It will help protect the interior of your vehicle from harmful UV rays. I will keep your dash board, steering wheel and leather interior in prestige condition during the hot weather.

Security

It is recommended to fold down visors to hold down Sun Shade in place for extra security. Prevents Burglars from looking into your vehicle.

Helps Defrost Window

• Keeps Interior Temperature Up To 20' F Warmer
• Insulate The Warm Temperature In The Cabin During Cooler Weather

Helps Prevent Dashboard Damage

• Keeps Dashboard Cool During Warmer Temperature
• Helps Prevent Cracks and Damages
• Reduces Dashboard Temperature as low as 60' to 80' F Cooler

Easy To Store Away

• Easy to Fold
• Glossy Silver Finish (Front Panel)
• Glossy Black Finish (Rear Panel)

Product description

The SunTouch TapeMat Floor Heat Kit contains everything needed for a quick and economical installation of a radiant heat flooring system. TapeMat is an open-weave floor heating mat that can be easily installed beneath tile, stone, or laminate flooring in homes and commercial buildings to bring comfort and a touch of luxury to your space. The mat installs in thin-set or self-leveling mortar. This kit includes a 120 VAC floor heating mat that measures 2 feet wide x 5 feet long and covers a 10 square foot area. The orange mesh can be cut with scissors and flipped to cover and fit your layout. The blue wire can be pulled out and run around obstructions and awkward spaces. Please note the blue wire should never be cut. This kit also includes a SunStat Command programmable touchscreen thermostat, LoudMouth installation monitor, double-sided tape, and an installation manual.

• TapeMat easily installs beneath tile, stone, or laminate flooring in homes and commercial buildings
• Kit includes mat, touchscreen programmable thermostat, floor sensor, and install accessories
• 2’ x 5’ customizable mat fits rooms of all shapes and sizes
• 1/8” thick cable. Connects to 120 volt AC power
• Double-sided tape adheres to subfloor and lays flat for fast layout. Safe and easy one-step application with thin-set or self-leveler

User questions & answers

Question:	If the mat is too long, can you cut it to fit the space
Answer:	You can trim the backing mat, but can not cut the heating wire.
Question:	Can you cut the Tape Mats
Answer:	Hello,The mats can be cut and modified to fit any shape of room. The orange mesh can even be completely cut away and the wire be used by itself as long as you maintain the 3" spacing. The BLUE wire can NOT be cut or shortened. Good luck on your installation!
Question:	Can you confirm the thermostat model? Item title has a 500850, item description says
Answer:	This Kit includes the Command 500850 thermostat when purchased from WarmYourFloor, as shown in the image. Other sellers may have old stock with the old thermostat 500775, at a different price. Sorry for the confusion on the description, but the title is correct when purchased from WarmYourFloor, http://www.amazon.com/SunTouch-Programmable-Thermostat-Temperature-Installation/dp/B003FIBP6C/ref=sr_1_5?m=A2AZVIVOJYQ3SW&s=merchant-items&ie=UTF8&qid=1451751944&sr=1-5&refinements=p_4%3ASunTouch the Thank you for the question.
Question:	How many watts while heating
Answer:	Suntouch mats provide 12 Watts per Sq Ft, so a 30 Sq Ft mat = 360 Watts

Product features

Install Anytime, Anywhere

• The SunTouch product line includes options for above subfloor, between joist bay, or concrete embedded systems
• Systems are available for warming tile, stone, wood, laminate, and other floor coverings

Proven Reputation

• With over 30 years of experience designing electric floor heating systems, you can feel confident choosing a SunTouch system
• We have a proven reputation with thousands of successful installations across North America

Many Different Features

• Options for display color themes, remote access, large touchscreens, and control of floor or air temperature
• Reduce energy cost with innovations like an outdoor reset in the SunStat Connect

SunTouch TapeMats come with double-sided tape on each side and an attached 10 ft powerlead

SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile. You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s) to the subfloor using the double-sided tape, secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.

Programmable Thermostat to Maintain Accuracy

• Built-in 15-amp relay controls up to 150 sq. ft. (1800 watts) at 120 V, or 300 sq. ft. (3600 watts) at 240 V
• SmartStart Technology automatically adjusts the start time of the floor warming system to ensure the floor has reached the set temperature at your scheduled time.
• Energy Use monitor shows the hours of system operation.

Make Sure Your System is Working Properly!

You can have peace of mind knowing that your floor heating system is in working order by testing the resistance of the heating elements with a Digital Multi-Meter.

Each cable has a UL tag on the power lead with a resistance (Ohm) range printed on it. Set the Multi Meter to 200 Ohms (2k if the Ohm range is over 200) and test the colored power lead wires. Then test the colored wires against the copper ground wire to make sure there is no resistance on the ground.