11 best flooring heatings

Product description

A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film.Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat.APPROVED FLOOR COVERING MATERIALS • All Floating Floors • Floating Tiles • Laminate Flooring • Engineered Wood • Luxury Vinyl Flooring (4mm or thicker) • Cork and BambooRefer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.Its available in four convenient rollout mat sizes that will accommodate most any layout. Each mat has wires pre-attached for ease of installation.• Uses an highly-efficient conductive ink technology • Consumes up to 50% less power than traditional wired systems • Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat • No mortar and no mess • Conforms to many floating floor manufacturers requirements • Disperses an evenly consistent heat throughout the entire floor

• easy installation - 3 simple step process (1. install underlayment, 2. roll out electric radiant heat film & 3. install final floor covering)
• " minimal thickness profile - ultra-thin (less than .016") heated panels keeps same floor heights through room transitions"
• provides uniform heat - your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly through the room
• quiets your floor - used in combination with quiet walk underlayment, you achieve a superior sound rating: iic 71 & stc 67
• safety certified - etl in compliance with ul standards for radiant flooring in the usa and canada
• cost less to operate - even heat distribution allows the quiet warmth systems to cycle quicker resulting in less energy consumption
• maintenance free - crafted to not completely shut down if the system should ever become compromised or damaged
• mat size: 1.5 ft. x 5 ft. - 120v

User questions & answers

Question:	Do I need to buy a thermostat to control it? Or can it be connected to a switch? Just on and off
Answer:	Yes sensor included.
Question:	What underlayment is recommended for this heating film
Answer:	Yes, you are able to hook up two separate mats to one thermostat. You just cannot exceed a 15 AMP draw. Please reference the reading on your mats for this information. If you have any further questions, please let us know. Thank you for considering this product.
Question:	Planning 1 mat 1.5x5 = 90 watts. Can I use this w/o thermostat? Just on a gfci protected circuit w/ off/on switch
Answer:	Yes - you tell name each room and can control each independent.
Question:	Can these be cut and wired in a series to one thermostat
Answer:	Currently No! We are working on a newer version of this product that with have the smart-home capability.

Product features

QuietWarmth Radiant Heat Film for Floating Wood and Laminate Floors

Installs easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor. The system, which sports an impressive efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout.

• Use with most floating laminate, engineered wood and floating tile floors
• Uses an highly-efficient conductive ink technology
• Disperses an evenly consistent heat throughout the entire floor
• Will not add extra height to the floor, only 0.016 in. thick
• Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
• No mortar and no mess
• Conforms to many floating floor manufacturers requirements

Provides uniform heat and cost less to operate

Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly throughout the room. Even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption. Also the heat will never exceed 85 degree F, allowing your feet to have the perfect temperature.

• 120V mats work with QuietWarmth 120V systems. 240V will work with 240V.

There is no easier radiant floor heating system to install.

Simple 4 step process!

1. Install underlayment.
2. Roll out electric radiant heat film
3. Hook up electric wiring
4. Install final floor covering

Floor Covering Materials

• All Floating Floors
• Floating Tiles
• Laminate Flooring
• Engineered Wood Flooring
• Luxury Vinyl Flooring (4mm or thicker)
• Cork and Bamboo

Note: Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation

• 100 Sq Ft Electric Radiant Floor Heating Mat, 20 Inches Wide x 61 Feet Long, Includes Required GFCI 7 Day Programmable Thermostat - 120VAC
• Highest Quality USA Floor Warming Cable Designed for Longevity by an over 20 Year USA Manufacturer
• Listed and Safe for Wet Locations. Thin profile ~1/8" thick. Multiple Configurations, Adheres to the Floor.
• ETL Listed for US & Canada - Limited Lifetime Warranty by an over 20 Year Trusted USA Manufacturer
• Voltage: 120V - Amps: 10 - Watts: 1200 - 15 ft Cold Lead - 12 Watts/Sqft

User questions & answers

Question:	does this increase the room temperature
Answer:	Yes, it comes with a programmable thermostat and you can set different times for different days of week, and you can program twice a day - so maybe a 3 hour chunk in the morning and other chunk at night.
Question:	Can you install this in concrete in an outside location
Answer:	Certainly possible, I am just not sure how well it will work thru that thickness of that stone. I have heard from others that their floor heater gets too hot to use. Mine is set to 76 and it is not hot, just very comfortable to walk on during the cold ohio weather. I have not cranked it up to the high setting which I think is 82. I would think if your granite supplier is familiar with this and say it works, I would have no hesitation that this unit could not do the job.
Question:	Do you have installation instructions or some video posted somewhere how its set into mortar prior to tile and so on? would be very helpful. Thank you
Answer:	I installed mine directly to the concrete slab and poured a self leveling compound over the top. It works just fine. I think the larger concrete slab acts as a giant heat sink and maybe doesn’t get as warm as it might otherwise and/or takes a little longer to heat up. That said, it works great and gets plenty warm where we actually laid it... in front of the sinks and in front of the shower. If you step off that area you can tell an immediate difference and I wish we’d put down a little more than we did.
Question:	Can you cut the end if you have too much and terminate it
Answer:	Sure, cut mesh and reposition the heating wire the way you need. http://www.heattechproducts.com/how-to-install-radiant-floor-heating-mats

Product description

A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film.

Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat.

APPROVED FLOOR COVERING MATERIALS

• All Floating Floors

• Floating Tiles

• Laminate Flooring

• Engineered Wood

• Luxury Vinyl Flooring (4mm or thicker)

• Cork and Bamboo

* Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.

Its available in four convenient rollout mat sizes that will accommodate most any layout.

Each mat has wires pre-attached for ease of installation.

• Uses an highly-efficient conductive ink technology

• Consumes up to 50% less power than traditional wired systems

• Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat

• No mortar and no mess

• Conforms to many floating floor manufacturers requirements

• Disperses an evenly consistent heat throughout the entire floor

KIT INCLUDES THE FOLLOWING

• QuietWarmth 30 Sq. ft. Electric Floor Heating System for Floating Floors - 3' x 10' - 120V

• QuietWarmth 7-Day Programmable Thermostat

• Kit includes: QuietWarmth 3' X 10 - 120V electric floor heating system & QuietWarmth 7-day programmable thermostat
• Easy installation - 3 simple step process (1. Install underlayment, 2. Roll out electric radiant heat film & 3. Install final floor covering)
• Minimal thickness profile - Ultra-thin (less than .016") heated panels keeps same floor heights through room transitions
• Provides uniform heat - Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly through the room
• Quiets your floor - used in combination with quietwalk underlayment, you achieve a superior sound rating: III 71 & STC 67
• Safety certified - ETL in compliance with UL standards for radiant flooring in the USA and Canada
• Cost less to operate - even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption
• Maintenance Free - crafted to not completely shut down If the system should ever become compromised or damaged

User questions & answers

Question:	What kind of underlayment is used
Answer:	For diesel
Question:	Can I use 240v Matt with 120v gauge wiring and circuit breaker
Answer:	Yes. It has a threaded bung hole on top on each end that are the right threads for a 12 v pump.
Question:	How much of thia would i need for a 12' x 20' room
Answer:	Yes
Question:	Can I cut this by length and join again or do I have to throw away whatever I cut
Answer:	Not that I know of think there is some law as to how large. IN my other truck I had a 70 gal made but could not find them all ready built.

Product features

3 ft. x 10 ft. x 0.016 in. 120-Volt Radiant Heat Film for Floating Wood and Laminate Floors (Covers 30 sq. ft.)

Installs easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor. The system, which sports an impressive efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout.

• Use with most floating laminate, engineered wood and floating tile floors
• Uses an highly-efficient conductive ink technology
• Disperses an evenly consistent heat throughout the entire floor
• Will not add extra height to the floor, only 0.016 in. thick
• Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
• No mortar and no mess
• Conforms to many floating floor manufacturers requirements

QuietWarmth 7-Day Programmable Thermostat for QuietWarmth Radiant Heat Systems with Built-in GFCI

Designed for underlayment applications, this MP Global Products 7-Day Programmable Thermostat makes it easy to precisely control temperature in your heated floor thanks to a floor sensor and a 4-event timer that allows the programming of automatic comfort and setback temperatures. A built-in ground fault circuit interrupter cuts power in the event of a power surge, helping to protect your floor and radiant system from damage and shield you from injury.

• 7-day (5-and-2) scheduling with 4 programming periods per day for consistent heating and cooling patterns
• Floor sensor monitors temperature to deliver accurate control for your heated floor
• Allows Fahrenheit and Celsius read-out settings for convenient reference
• Built in ground fault circuit interrupter cuts power in the event of a power surge, helping to protect you, your floor and your radiant system
• Compatible with most 120/240-Volt radiant floor heating systems
• 120-Volt power source recommended for heated underlayment applications

Provides uniform heat and cost less to operate

Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly throughout the room. Even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption. Also the heat will never exceed 85 degree F, allowing your feet to have the perfect temperature.

Note: This kit will only work with QuietWarmth 120V systems.

There is no easier radiant floor heating system to install.

Simple 4 step process!

1. Install underlayment.
2. Roll out electric radiant heat film
3. Hook up electric wiring
4. Install final floor covering

Approved Floor Covering Materials

• All Floating Floors
• Floating Tiles
• Laminate Flooring
• Engineered Wood Flooring
• Luxury Vinyl Flooring (4mm or thicker)
• Cork and Bamboo

* Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.

User questions & answers

Question:	Can you use this under luxury vinyl tile? The lifeproof type with underlayment backing
Answer:	If you want it to be waterproof, yes. If that is not a consideration, no. Also, I put the membrane down in one day, then left overnight to cure. I didn’t apply the tape until I was installing the tile. That is the way to avoid any raised/dried mortar at the seams. If applied the same day, it can be leveled more easily.
Question:	Can this be used under ceramic tile
Answer:	You should be able to. But you need to read the specs
Question:	are these CSA approved?\
Answer:	The printed side is up so you have a second extra layer of protection under the floor and have the grid for straight line cutting
Question:	iIwould like to install this under a section of laminate flooring, but not entire 1800 sq ft. What underlayment could i use in the unheated areas
Answer:	Am in Florida, so no basements here. But I did recently install it on our concrete base and it seems like it’ll be fine. Both sides are a moisture barrier built in. Perhaps for a basement adding a dedicated moisture barrier first would help

Product features

Why Choose ThermoFloor?

• Safe and reliable FiberThermics heating elements mean peace of mind under combustible laminate and wood floors.
• Complete solution – Subfloor, Noise Reduction, Mold and Mildew Resistance, Moisture Wicking, and Heating in one system.
• Ready-To-Go – Simply roll out underlayment, make electrical connections, lay laminate or engineered wood, and enjoy your new warm floors.

How to Choose Your ThermoFloor Mats:

• You can combine several, any-size mats to get the right total coverage.
• ThermoFloor cannot be cut. Make sure you choose the mat sizes you need to fit your specific application.
• Measure the area of the room and subtract any area with permanent fixtures or flat-bottomed furniture. Make sure the mat options you select will fit together without overlapping or cutting.
• If you need help choosing your fit, please contact our support team.

• Make sure you choose a single voltage option when purchasing multiple mats. 120V and 240V mats do not mix voltages connecting to one thermostat.
• 120V – Use this variation if you have a room under 200 sq. ft.
• 240V – Use this variation if you have a room over 200 sq. ft.

• You will need one thermostat per 200 sq. ft. with a 120-Volt system and one thermostat per 400 sq. ft. with a 240-Volt system.
• A 240-Volt system heats the same as 120-Volt, there is no need to use a 240-Volt on heated areas less than 150 sq. ft.
• Fill any unheated area with 1/8" padding.

Why Choose Electric Radiant Floor Heat?

• Directly warms the body, not the ceiling, so it feels warmer than forced-air or convective heat.
• Warms from the floor up, unlike forced air heat that leaves the legs and feet cold.
• Radiant floor heat is totally quiet. There are no noisy fans blowing warm air into the room.
• No uncomfortable drafts because there are no fans blowing air.

Cleaner & Healthier

• Cleaner, healthier and hypoallergenic because they eliminate the need for carpet.
• No dirty vents or ducts that trap and circulate air with dirt, dust mites and allergens.
• Helps to eliminate mold and mildew.
• Electric radiant floors are maintenance free, so there are no dirty filters to change.

Saves Energy

• Radiant heat feels 6-8 degrees (F) warmer than forced air. You can save an estimated 3-5% for every degree the thermostat is turned down.
• Radiant heat does not rise to the ceiling, where an enormous amount of convective heat is wasted.
• Utilizes 100% of supplied electrical energy to create warmth directly under the floor. No energy is expended operating fans or pumps.

• easy installation - 3 simple step process (1. prepare a clean and stable sub-floor, 2. place quietwarmth tile heat mat, peel back release liner, and adhere to sub-floor & 3. thin set and tile on surface)
• "minimal thickness profile - ultra-thin (less than .03") heated panels keeps same floor heights through room transitions"
• provides uniform heat - your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly through the room
• safety certified - etl in compliance with ul standards for radiant flooring in the usa and canada
• cost less to operate - even heat distribution allows the quietwarmth systems to cycle quicker resulting in less energy consumption
• maintenance free - crafted to not completely shut down if the system should ever become compromised or damaged
• mat size: 3 ft x 5 ft - 240v

Product description

This WarmWire (R) floor warming installation kit contains everything needed for quick and economical installation of a radiant heat flooring system. It makes installation easy and will provide heat to warm the floors and help keep bathroom, kitchen and entry way floors dry and safe. This kit includes a 120 volt floor heating wire that covers a specified area square foot when installed with 3 inch spacing, a SunStat Pro II programmable thermostat, cable strap, double-sided tape, LoudMouth installation monitor, and an in-depth installation manual.

• WarmWire easily installs over plywood, backerboard, or concrete slab.
• Kit includes WarmWire, programmable SunStat thermostat, LoudMouth Alarm, and install accessories.
• Includes heating wire to cover a 30 square foot area.
• Single point power connection makes for easy layout and wiring.
• Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
• Approved for shower applications.
• Connects to 30 volt AC power.
• Energy efficient and affordable underfloor heating solution.

User questions & answers

Question:	how many rolls of wire can one thermostat control? I want to install this on the main floor of my house under a new laminate wood plank flooring
Answer:	yes, when you open the hot water in the bath or kitchen, the water heater automatically starts to heat the water. no need to turn it on.. and it just work when you need hot water
Question:	can the thermostat be programmed to turn on and off
Answer:	AC adapter would be a good upgrade. Why? After two weeks the burner stopped igniting. The spark ignighters work but burner will not light. I pulled panel to go through wires. No gas was going through gas valve solenoid. The reason is D size batteries only lasted two weeks. I changed batteries and it works great again.
Question:	My warranty sheet/card is missing in the box, what should i do? is 25yrs warranty still valid? how do i file it
Answer:	I would not unless you hook vent for exhaust to outside
Question:	How many amps
Answer:	Hello. At this time, the iHeat AHS11-D is not available on Amazon. Feel free to ask us any other questions. GadgetsGo is an Authorized iHeat Distributor. Kind Regards, John M. GadgetsGo

Product features

Install Anytime, Anywhere

• The SunTouch product line includes options for above subfloor, between joist bay, or concrete embedded systems
• Systems are available for warming tile, stone, wood, laminate, and other floor coverings

Proven Reputation

• With over 30 years of experience designing electric floor heating systems, you can feel confident choosing a SunTouch system
• We have a proven reputation with thousands of successful installations across North America

Many Useful Features

• Options for display color themes, remote access, large touchscreens, and control of floor or air temperature
• Reduce energy cost with innovations like an outdoor reset in the SunStat Connect

Electric Floor Heating Cable

SunTouch WarmWire is a series resistance heating cable assembly for installation over plywood, backer board, or a concrete slab (according to ANSI or TCNA guidelines), and then embedded in 3/8 in. (9.5 mm) or greater self-leveling or polymer-modified thin-set mortar.

SunTouch WarmWire cables contain an electric heating wire to provide underfloor heat in bathrooms, kitchens, entryways, and other areas and are an affordable alternative to radiant heated mats. Approved for installation in shower applications where permitted. The durable, constant-diameter wire is easily secured at 2.5 in., 3 in., or 3.5 in. intervals with CableStrap. Controlled by a SunStat floor sensing thermostat (sold separately). WarmWire is available in various lengths with voltage options of 120 or 240VAC.

WarmWire Installation

WarmWire is the most flexible choice for irregularly-shaped or curved rooms and stairs. For typical installations, WarmWire is spaced at 3 inches on center. For areas with high heat loss, the spacing can be lowered to 2.5 inches for added warmth. In hallways and rooms that are well insulated, spacing can be increased to 3.5 inches on center. Controlling the level of warmth is easily accomplished with a connected SunStat Thermostat.

SunStat Thermostat

• Control your floor heating system(s)
• WiFi capability allows control of your system anytime anywhere
• 7-day scheduling capability
• Dual Voltage 120/240V with built-in GFCI for safety and energy use monitoring
• ASIN: B01JDGMGNA

LoudMouth Alarm

• Sounds an alarm if the heating wire is cut or damaged, allowing for easy repair before the mat is covered with mortar and tile
• A green light to indicate GO and a red light to indicate STOP if there's damage
• Simple operation with an on/off switch and a test button
• ASIN: B0080KWIY8

HeatMatrix

• Versatile heating cable compatibility
• Vapor management system
• Shear stress control
• Waterproof
• ASIN: B01N6ROBBY

SunTouch Trowel

• Plastic design reduces risk of damaging wire
• 3/8 inch wide x 1/2 inch deep
• U-shape notches aid in mortar distribution
• For use in electric heated floor applications
• ASIN: B005ZTMPXG

• TEMPZONE ELECTRIC RADIANT FLOOR HEATING CABLE: WarmlyYours TempZone Electric Radiant Floor Heating Cable is cULus Listed and designed for applications under ceramic tile, natural stone, nailed hardwood, wood floors, this 595 ft. free-form cotton cable provides an alternative for installers who prefer the flexibility and freedom of working with loose cable, can be installed at either 3" or 4" and is available in two voltage options, is ultra-low EMF by design, also features a low profile (1/8 inch thick) twin conductor with a 15’ cold lead
• nSPIRE TOUCH PROGRAMMABLE THERMOSTAT: This dual voltage (120V/240V) thermostat comes with energy log for tracking use and built-in self-testing GFCI, features "Child-Lock" function and a 3.5” full color touchscreen, complimentary floor sensor allows for energy efficient operation of your floor heating system, with the ability to set up 4 separate temperature events per day and the integrated install wizard, lets you customize your comfort while cutting down on operating cost
• PRODESO HEATING CALBE MEMBRANE ROLL: This cost- and time-effective 162+54 sq. ft. sheet of membrane allows quick installation of floor heating over a variety of different substrates such as tile, marble, and stone floors, provides uncoupling and crack isolation benefits, features integrated channels are shaped to easily and securely hold the TempZone Electric Radiant Floor Heating Cable, makes it easy to maintain proper spacing throughout an entire project
• FLEXIBLE HEATING COVERAGE: This kit comes with a 595 ft. long heating cable which can provide between 185.9 sq. ft. of heating coverage at 3.75” spacing (ideal spacing for optimal heat output) in membrane and 247.9 sq. ft. of heating coverage at 5” spacing

User questions & answers

Question:	Can i use this under real wood floor
Answer:	No. Binary is an on/off (0 or 1) system. This remote would likely be considered as a Ternary system since it offers three settings - 0, +, and -. All of the remotes I've encountered offer this system. Download the user guide - it provides full detail. Also, Check your receiver. What are the options there? Likely 0, - , and+.
Question:	what is the thinkness of the mat
Answer:	I don't know. Mine is an Allstar 6500.
Question:	Why does the description say 180 ft? When i have it on
Answer:	I don't think this will work unless you have an Allstar receiver on the back of the operator
Question:	Can I pour a self leveler over the cable
Answer:	No. I tried programming it to my Allstar opener - circa '96, but no luck. It doesn't support openers with 10 dip switches or more. However, what remote did work for me, and was truly 'universal' was the "Chamberlain model KLIK1U". You can program it either with the 'smart/learn' button -or if like me you have 'dip switches'.
Question:	Can I cut the wire off 4’ at the end because it’s more than needed
Answer:	Have no idea sorry
Question:	What is the high temperature it can generate
Answer:	Segment Reprogram remote control wall garage door openers 1 press learn button once & release. 2. Press remote control button then you will see a light on your garage motor turn off. 3. Test opener Good luck to you
Question:	where can I find additonal floor sensors
Answer:	Yes, it will work for that model, but you have to reset and reprogram your AllStar Garage Door Openers 110838 Wall Console motor. Good luck!
Question:	Can I use a different thermostat? For example one that is homekit compatible
Answer:	I don't think so. I looked at the compatibility of MVP and Liftmaster was not listed. Here is a link to Liftmaster compatible remotes: http://chamberlain.custhelp.com/app/answers/detail/a_id/209/~/liftmaster%C2%AE-remote-compatibility

• Complete heating system - including everything needed
• Simple and reliable heating cables that we have used since 1991.
• A precise multifunctional digital programming thermostat with installation box
• installation manual

User questions & answers

Question:	Is this for under tile flooring and does it come with clips to hold the wirer in place? Can I see a set of instructions
Answer:	not sure sure,but if the garage door motor is prior to 1992 chances are good that it will work
Question:	What is the diameter of the wire
Answer:	I replace this model Allstar 600 last year for lift master the motor stop working after 27 year,but I still have remotes you can have it you can program the code with this remote with Allstar 600
Question:	I just need for 100sf. May I use only one spool of two
Answer:	I don't know but this one below should.http://www.amazon.com/Allstar-9921T-Remote-Garage-Transmitter/dp/B000CZ2GN2/ref=sr_1_fkmr0_1?ie=UTF8&qid=1398733588&sr=8-1-fkmr0&keywords=Allister+model+ADX+921
Question:	How many feet of wire on the spool
Answer:	Yes will work, you program your code need to be the Same as the control panel, I no longer have the all o magic motor after 27 years motor went but I have the 4 remote that is in good condition

• REDUCES RISK OF TILE CRACKS DUE TO SUBFLOOR MOVEMENT - Nuheat Membrane is an uncoupling membrane which absorbs subfloor movements that can cause tiles to crack. Nuheat Membrane received the highest 'Extra Heavy' result in Robinson Floor Test (ASTM C627).
• ACTS AS TILE UNDERLAYMENT - Nuheat Membrane can replace plywood/concrete board as the tile underlayment in most tile installations. Tile/Stone floors can be installed on Nuheat Membrane using modified and unmodified thinsets. Nuheat Membrane is made from extruded polypropylene and can be used as a waterproofing membrane.
• COMPATIBLE WITH THE NUHEAT CABLE FLOOR HEATING SYSTEM - Nuheat Membrane is specifically designed to accept the best-in-class Nuheat Cable floor heating system. When combined with Nuheat Cable as the floor heating solution, the integrated system provides the installer the ability to adjust the wire spacing and heat output according to the installation needs.
• ON-SITE FLEXIBILITY - Nuheat Membrane is cut on-site to fit the room. Nuheat Cable is then installed into Nuheat Membrane and adjusted on-site to provide heat coverage where it is desired. Installers only need to know the approximate square footage of the area(s) that need to be heated.
• 25-YEAR WARRANTY - Nuheat Cable resistance must be tested before, during and after installation to validate Nuheat warranties. All wiring connections should be completed by a certified electrician.

User questions & answers

Question:	Can we lay this over existing tile and then tile on top of it
Answer:	Stuck the end of a paper clip that had been unbent into the hole in the middle of the wall unit (the hole is located under the stop sign and above the light picture) until the light on the unit on the ceiling turns green then touch the remote.
Question:	This goes above or below heating mat
Answer:	Only if that model is labeled as an MVP opener or receiver. Otherwise, no.
Question:	Does this item comes with heating element wires
Answer:	Yes it does come with a battery.
Question:	Does this product work with Heatwave cable
Answer:	No it doesn't
Question:	I need 24" x 60".. Can I route the last one feet wire along the side to increase the width to 24" and keep the length to
Answer:	I believe so. It is the control in your garage that operates the door vs. the clicker(s) in your vehicle. The console signals the power head to transmit the code to your wireless keypad. Is your wall console missing? Hope this helps
Question:	I am planning to install wooden floor (hardwood or laminate) in my bathroom. Can I use this system to heat wooden floors or is is for tiles only
Answer:	AFAIK, only one pin. Change pin back after delivery. Might contact company.
Question:	I have a concrete slab that I would like to add electric floor heating and tile over it. How do I avoid moisture build up with this product
Answer:	I have 3 MVP AllStar openers and I was able to operate all 3 doors with one keypad. Simply enter 3 different codes for each. For example 1001 for one, 1002 for a second and 1003 for the third etc.
Question:	Can this be used when installing a drop-in tub to keep bath water warm
Answer:	No. You program the wireless to Marc your remotes.

Product description

Schluter-DITRA-HEAT is a modern, advanced under-tile floor heating system. A significant refinement on the underfloor heating systems from the last decade, it is thinner, easier to install, and is entirely waterproof. This is a roll of the uncoupling membrane used in the new DITRA-HEAT system. The DITRA-HEAT membrane not only serves as the perfect inlay for DITRA-HEAT heating wire, it also performs the tile-uncoupling functions of other underfloor DITRA membranes. This results in less tile breakage, eliminates grout problems, and makes replacing any tiles that do happen to break a trivial process. Product Features Tile Uncoupling Functionality Schluter-DITRA-HEAT membranes carry over all the functionality of Schluter-DITRA uncoupling membranes. The membrane functions as a flexible layer between your tile and the rigid subfloor underneath it, significantly reducing tile breakage and eliminating grout problems.

• Ditra Heat Membrane
• Dimensions 3' 3" x 41' 1"
• 134.5 sq ft Roll
• 1/4" (5.5 mm) Thickness
• UNCOUPLING FLOOR MEMBRANE

User questions & answers

Question:	How many square feet does this roll cover
Answer:	Yes! That is one of the great things about it! :)
Question:	how thick is this membrane
Answer:	No heat pad, just the carrier. PBS's Cook's Country (America's Test Kitchen) looked at several casserole carriers and determined this one kept a 9"x13" 180 degrees F ziti casserole hot (140F or above) for 3 hours where the others they tested only did it for an hour. It also determined a 9"x13" casserole dish did NOT slip in this one. This one was their recommended choice which is why I'm getting one. When I bring food to Easter, Thanksgiving, etc. gatherings, I often bring a 12" x 9" disposable lasagna pan full of some veggie dish plus other food in a crock pot. I have a crock pot carrier and heat there isn't a problem because I can plug it in at the event. A 12 x 9 disposable pan may have to sit it inside a 13"x 9" glass or aluminum casserole dish to hold it steady, but that's not a problem for me.
Question:	Can you put this under a Karndean vinyl type tile
Answer:	No, while it has two inputs, there is a switch that switches between the two inputs. it does not have an option for both on at the same time.
Question:	Why can't a different brand of heating wire be used with the membrane? Is there an actual engineering reason or strictly a sales/marketing reason
Answer:	The radial website is going to have the latest picture so it is safe to assume that it would be on the unit you would get, Radial will make updates to products to make them better and this is one. We have the product in FBA so pick one up today from us, Thanks George DJ BAND SUPPLY

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat Heated Floor Mat is best suited for installation under Tile, Stone, Laminate and Engineered Wood flooring. Heater Kit Includes - Self-Adhesive Heating Mat, OJ Microline UDG-4999 Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection), plus Cable Monitor/Alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing coverage where neded. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. The single point power connection makes for easy wiring, and the less than 1/8" heating cable ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - With a combined experience of over 50 years, the LuxHeat Tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty - providing Peace of Mind and an assurance of performance for many years to come. LuxHeat's radiant floor heat Cables and mats are UL approved and Safe for Wet Locations.
• PROGRAMMABLE THERMOSTAT - The OJ Microline UDG promotes sleek modern design and intuitive control, making it easy to install and easy to use. The 120 Volt, 15 amp thermostat includes an integrated Class A GFCI (ground fault protection), External floor sensor, and offers Dual (air & floor) sensing capabilities. Features 7-day Program Schedule, providing maximum comfort, while reducing operating costs, power logging, child lock and more. cULus approved for USA and Canada. 3-year Factory Warranty.
• TECHNICAL DETAILS for Heated Mat - Size: 60 Sqft (20" x 36.60'), 12w/Sqft @ 3" wire spacing's (120v) 720w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	Can this be used on shower floor
Answer:	NO
Question:	I purchased this on oct. 16, 2020 the thermostat is in child lock mode and I cannot unlock it. I have tried numerous times according to theinstruction
Answer:	I don't know call All-star 18007836112 they will know. There is a MVP forum. MPVclub. Good luck
Question:	Does this have to be set in mortar
Answer:	No. Keyless programs to the receiver on the opener.
Question:	Cann I just lay it on of a concrete floor without using a mortar
Answer:	Unit is backlit for easy operation.