14 best electrical floor heatings

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated

LuxHeat mats can be cut, turned, flipped, or have wires removed to accommodate any room shape or size

Controlled by OJ Microline's Intuitive Programmable thermostat to become one of the most versatile, easy to install heating systems

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

★ Can be installed as primary or secondary heat source

HEATING MAT FEATURES:

✔ Zero EMF (Electromagnetic Field)

✔ Double insulated, single cold lead

✔ UL listed for USA, suitable for wet locations

✔ Twin conductors, Alu foil sheath and ground wire

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ 120 Volt

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ Large backlit display with Intuitive menu

✔ Other Modes: Child lock, Manual override & more

✔ Compatible with most radiant Floor Heating Systems

✔ 7-Day Program, pre-set program can be customized to suit one’s lifestyle

Cable Monitor: Includes batteries

BENEFITS:

✔ Versatile, Fast & Easy to install, Easy to Use

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

 

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat Heated Floor Mat is best suited for installation under Tile, Stone, Laminate and Engineered Wood flooring. Heater Kit Includes - Self-Adhesive Heating Mat, OJ Microline UDG-4999 Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection), plus Cable Monitor/Alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing coverage where neded. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. The single point power connection makes for easy wiring, and the less than 1/8" heating cable ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - With a combined experience of over 50 years, the LuxHeat Tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty - providing Peace of Mind and an assurance of performance for many years to come. LuxHeat's radiant floor heat Cables and mats are UL approved and Safe for Wet Locations.
• PROGRAMMABLE THERMOSTAT - The OJ Microline UDG promotes sleek modern design and intuitive control, making it easy to install and easy to use. The 120 Volt, 15 amp thermostat includes an integrated Class A GFCI (ground fault protection), External floor sensor, and offers Dual (air & floor) sensing capabilities. Features 7-day Program Schedule, providing maximum comfort, while reducing operating costs, power logging, child lock and more. cULus approved for USA and Canada. 3-year Factory Warranty.
• TECHNICAL DETAILS for Heated Mat - Size: 20 Sqft (20" x 12.20'), 12w/Sqft @ 3" wire spacing's (120v) 240w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	Can this be installed in a shower? Waterproof
Answer:	Yes, please contact us through message or email. We are glad to offer you replacement lids.
Question:	What is the actual length of the mesh? I'm finding 2 different answers
Answer:	Yes. Like a mason jar, it can be used hot or cold
Question:	Does this need to be installed the mesh in a bed of mortar first or can I apply my mortar as I tile and do it all in one step
Answer:	I've never tried. You would have to try one to find out for sure. Inside the cap looks like it might be possible, but it's really hard to tell.

Product description

TapeMat (TM) is an open-weave floor heating mat that can be easily installed beneath tile, stone, or laminate flooring in homes and commercial buildings. This 2’ x 10’ mat is customizable to fit rooms of all shapes and sizes, easily handling curves, angles, and cutouts. The orange mesh can be cut with scissors and flipped to cover and fit your layout. The blue wire can be pulled out and run around obstructions and awkward spaces. Please note the blue wire should never be cut. TapeMat is completely safe for home use. It allows for one-step installation using thin-set mortar or a self-leveler. Double-sided tape adheres to the subfloor to allow for fast layout. TapeMat easily connects to 120 volt AC power, bringing comfort and a touch of luxury to your space.

• TapeMat easily installs beneath tile, stone, or laminate flooring in homes and commercial buildings
• 2’ x 10’ customizable mat fits rooms of all shapes and sizes
• 1/8” thick cable. Connects to 120 volt AC power
• Double-sided tape adheres to subfloor and lays flat for fast layout
• Safe and easy one-step application with thin-set or self-leveler. Orange mesh can be cut with scissors to fit room layout

User questions & answers

Question:	Can this be installed on the under side of a stone topped desk? If so can a standard wall plug and in line switch be used
Answer:	Possible but not recommended.
Question:	Can this be wall mounted
Answer:	Absolutely not
Question:	Can this be installed under carpet and padding
Answer:	Yes, you can install SunTouch floor warming mats under carpet, but they still need to be embedded in mortar. We recommend covering them with a 1/4" layer of self-leveling underlayment so you have a smooth and even surface to put the carpet over.
Question:	Can this be installed between the joists in a basement to heat the floors upstairs (main floor
Answer:	This floor heat mat needs to be installed on top of a sub-floor material such as wonder board, hardy board,etc. According to the manufacturer, once the mat is placed it should be covered with a "polymer-modified thin set cement -based mortar". The manual further states "NEVER install SunTouch mat under carpet, wood, vinyl, or other non-masonry flooring without embedding it in thin-set, or self leveling mortar".

Product features

Install Anytime, Anywhere

• The SunTouch product line includes options for above subfloor, between joist bay, or concrete embedded systems
• Systems are available for warming tile, stone, wood, laminate and other floor coverings

Proven Reputation

• With over 30 years of experience designing electric floor heating systems, you can feel confident choosing a SunTouch system
• We have a proven reputation with thousands of successful installations across North America

Many Useful Features

• Options for display color themes, remote access, large touchscreens and control of floor or air temperature
• Reduce energy cost with innovations like outdoor reset in the SunStat Connect

SunTouch TapeMats come with double-sided tape on each side and an attached 10 ft powerlead

SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile. You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s) to the subfloor using the double-sided tape, secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.

Make Sure Your System is Working Properly!

You can have peace of mind knowing that your floor heating system is in working order by testing the resistance of the heating elements with a Digital Multi-Meter.

Each cable has a UL tag on the power lead with a resistance (Ohm) range printed on it. Set the Multi Meter to 200 Ohms (2k if the Ohm range is over 200) and test the colored power lead wires. Then test the colored wires against the copper ground wire to make sure there is no resistance on the ground.

• 25 Square Feet Heating Mat, 20 Inches Wide x 15 Feet Long, Includes Required GFCI 7 Day Programmable Thermostat - 120VAC
• Highest Quality USA Heating Cable Designed for Longevity by an over 20 Year USA Manufacturer
• Listed and Safe for Wet Locations. Thin profile ~1/8" thick. Multiple Configurations, Adheres to the Floor.
• ETL Listed for US & Canada - Limited Lifetime Warranty by an over 20 Year Trusted USA Manufacturer
• Voltage: 120V - Amps: 2.5 - Watts: 300 - 15 ft Cold Lead - 12 Watts/Sqft

User questions & answers

Question:	does this increase the room temperature
Answer:	It fit my 2000 F150 extended cab 6.5 bed
Question:	Can you install this in concrete in an outside location
Answer:	Normal 5/8 garden hose works just fine.
Question:	Do you have installation instructions or some video posted somewhere how its set into mortar prior to tile and so on? would be very helpful. Thank you
Answer:	Specs: PSI: 3500 GPM: 3.3 Gas Tank Capacity: 1.7 gal. Burner Fuel Tank Capacity: 5.5 gal. Burner Fuel Consumption: 2.14 gal./hr. BTU Per Hour: 294,000 Displacement/ Engine: 389 cc Honda OHV Dimensions: 43" L X 30" W X 41" H Weight: 428 lbs.
Question:	Can you cut the end if you have too much and terminate it
Answer:	I believe the unit I have is on/off sturdy switch. You don’t want a temp control, your employees will break the dial turning to the highest temp, every time they power wash.

Product features

Programmable Thermostat

Heatwave standard thermostat (M429) specifications:

• Up to 4 event programming
• Simple user interface
• Pre-programmed for quick set up
• Multi voltage: 120/208/240 V
• Output Relay 15A
• Can be set to automatic, manual, or comfort mode
• Includes 2 sensors: a built-in air sensor and floor sensor thermistor with 10 feet of NTC (12K) sensor cable
• Temperature control range: 41ºF to 104ºF
• Class A GFCI (5 mA trip level)

An Efficient System

The Heatwave system comes with a 10-foot long floor sensor standard for optimal use of your Heatwave System. Extra compatible sensors are available on our store page.

Fully Embedded System

Heatwave can be embedded in various types of cement-like material, allowing for several floor covering options. Embedding Heatwave allows for optimal heat dispersion and gives the end-user a nice, consistently warmed floor.

Be sure to get the right size!

Heatwave comes in various sizes to accommodate differing size spaces. It is important to accurately measure the space you intend heat. Avoid placing the heating cable under vanities, within 6-inches of the toilet gasket and under other permanent fixtures in the space. It is acceptable to place Heatwave in a shower, provided that is still fully embedded in a thinset/or Mortar.

Be aware the heating cable cannot be cut or shortened in anyway.

Get the Right Size

Be sure to order a Heatwave system for the area to BE HEATED, not the total area. The Heatwave heating element CANNOT be cut or shortened to a fit a space.

Smaller size systems are available to fit smaller areas.

Avoid performing any cutting/drilling tasks on a finished/partially finished floor that could cause damage to heating element.

Don't Power on Until...

Do not power on the Heatwave System until it has been completely embedded in a cement-based compound (thinset/mortar/self-leveling) and that compound is completely dried.

Do not power on a Heatwave System to "test" or to dry out an embedding compound.

Completely Embed

The Heatwave cable MUST be completely embedded (unable to be seen) in a cement-based compound (thinset/mortar/self-leveling).

Both connection/junction points must also be fully embedded, the connection point at the end of the heating element and the connection point between the red heating cable and the black unheated (cold lead) cable.

Ensure that air pockets in mortar/thinset/self-leveling compound with exposed heating element, get fully filled-in.

Perform All Tests

Perform all required tests outlined in the installation manual at several stages throughout installation to ensure that heating element has not been damaged.

Failure to perform all the required tests at several stages can cause system damage to be missed which can lead to system errors, ground faults, non-functional systems, and unrepairable damage.

Product description

This WarmWire (R) floor warming installation kit contains everything needed for quick and economical installation of a radiant heat flooring system. It makes installation easy and will provide heat to warm the floors and help keep bathroom, kitchen and entry way floors dry and safe. This kit includes a 120 volt floor heating wire that covers a 40 square foot area when installed with 3 inch spacing, a SunStat Pro II programmable thermostat, cable strap, double-sided tape, LoudMouth installation monitor, and an in-depth installation manual.

• WarmWire easily installs over plywood, backerboard, or concrete slab
• Kit includes mat, touchscreen programmable thermostat, floor sensor, and install accessories
• Includes heating wire to cover a 40 square foot area
• Single point power connection makes for easy layout and wiring
• Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels
• Energy efficient and affordable underfloor heating solution.

User questions & answers

Question:	how many rolls of wire can one thermostat control? I want to install this on the main floor of my house under a new laminate wood plank flooring
Answer:	No, you cannot store water in the tank. It is designed for fuel only.
Question:	can the thermostat be programmed to turn on and off
Answer:	No
Question:	My warranty sheet/card is missing in the box, what should i do? is 25yrs warranty still valid? how do i file it
Answer:	Yes, This kit will fit the 03 F150 with 6.5 Foot Bed 4 Wheel Drive. Thanks!
Question:	How many amps
Answer:	This will not fit, it is only correct for the regular cab model for your 2001 Ford F150 4WD 6.5 foot bed.

Product features

Install Anytime, Anywhere

• The SunTouch product line includes options for above subfloor, between joist bay, or concrete embedded systems
• Systems are available for warming tile, stone, wood, laminate, and other floor coverings

Proven Reputation

• With over 30 years of experience designing electric floor heating systems, you can feel confident choosing a SunTouch system
• We have a proven reputation with thousands of successful installations across North America

Many Useful Features

• Options for display color themes, remote access, large touchscreens, and control of floor or air temperature
• Reduce energy cost with innovations like an outdoor reset in the SunStat Connect

Electric Floor Heating Cable

SunTouch WarmWire is a series resistance heating cable assembly for installation over plywood, backer board, or a concrete slab (according to ANSI or TCNA guidelines), and then embedded in 3/8 in. (9.5 mm) or greater self-leveling or polymer-modified thin-set mortar.

SunTouch WarmWire cables contain an electric heating wire to provide underfloor heat in bathrooms, kitchens, entryways, and other areas and are an affordable alternative to radiant heated mats. Approved for installation in shower applications where permitted. The durable, constant-diameter wire is easily secured at 2.5 in., 3 in., or 3.5 in. intervals with CableStrap. Controlled by a SunStat floor sensing thermostat (sold separately). WarmWire is available in various lengths with voltage options of 120 or 240VAC.

WarmWire Installation

WarmWire is the most flexible choice for irregularly-shaped or curved rooms and stairs. For typical installations, WarmWire is spaced at 3 inches on center. For areas with high heat loss, the spacing can be lowered to 2.5 inches for added warmth. In hallways and rooms that are well insulated, spacing can be increased to 3.5 inches on center. Controlling the level of warmth is easily accomplished with a connected SunStat Thermostat.

SunStat Thermostat

• Control your floor heating system(s)
• WiFi capability allows control of your system anytime anywhere
• 7-day scheduling capability
• Dual Voltage 120/240V with built-in GFCI for safety and energy use monitoring
• ASIN: B01JDGMGNA

LoudMouth Alarm

• Sounds an alarm if the heating wire is cut or damaged, allowing for easy repair before the mat is covered with mortar and tile
• A green light to indicate GO and a red light to indicate STOP if there's damage
• Simple operation with an on/off switch and a test button
• ASIN: B0080KWIY8

HeatMatrix

• Versatile heating cable compatibility
• Vapor management system
• Shear stress control
• Waterproof
• ASIN: B01N6ROBBY

SunTouch Trowel

• Plastic design reduces risk of damaging wire
• 3/8 inch wide x 1/2 inch deep
• U-shape notches aid in mortar distribution
• For use in electric heated floor applications
• ASIN: B005ZTMPXG

Product description

The SunTouch TapeMat Floor Heat Kit contains everything needed for a quick and economical installation of a radiant heat flooring system. TapeMat is an open-weave floor heating mat that can be easily installed beneath tile, stone, or laminate flooring in homes and commercial buildings to bring comfort and a touch of luxury to your space. The mat installs in thin-set or self-leveling mortar. This kit includes a 120 VAC floor heating mat that measures 2 feet wide x 7.5 feet long and covers a 15 square foot area. The orange mesh can be cut with scissors and flipped to cover and fit your layout. The blue wire can be pulled out and run around obstructions and awkward spaces. Please note the blue wire should never be cut. This kit also includes a SunStat Command programmable touchscreen thermostat, LoudMouth installation monitor, double-sided tape, and an installation manual.

• TapeMat easily installs beneath tile, stone, or laminate flooring in homes and commercial buildings
• Kit includes mat, touchscreen programmable thermostat, floor sensor, and install accessories
• 2’ x 7.5’ customizable mat fits rooms of all shapes and sizes
• 1/8” thick cable. Connects to 120 volt AC power
• Double-sided tape adheres to subfloor and lays flat for fast layout. Safe and easy one-step application with thin-set or self-leveler

User questions & answers

Question:	If the mat is too long, can you cut it to fit the space
Answer:	The height is 18, width is 12.
Question:	Can you cut the Tape Mats
Answer:	The cap may be defective - please contact the manufacturer for a replacement. https://www.lundinternational.com/contact/
Question:	Can you confirm the thermostat model? Item title has a 500850, item description says
Answer:	Yes, it is certified for gas. The size is great, it even fits thru the door of our Dodge caravan side, so the weight is I front of the axle.
Question:	How many watts while heating
Answer:	Delta does not make any split tanks. The only rectangular split tank that we have is at this linkhttp://www.amazon.com/gal-split-rectangle-refueling-tank/dp/B008EUAUGM/ref=sr_1_1?ie=UTF8&qid=1386064156&sr=8-1&keywords=B008EUAUGMThank you.Pickup Specialties

Product features

Install Anytime, Anywhere

• The SunTouch product line includes options for above subfloor, between joist bay, or concrete embedded systems
• Systems are available for warming tile, stone, wood, laminate, and other floor coverings

Proven Reputation

• With over 30 years of experience designing electric floor heating systems, you can feel confident choosing a SunTouch system
• We have a proven reputation with thousands of successful installations across North America

Many Different Features

• Options for display color themes, remote access, large touchscreens, and control of floor or air temperature
• Reduce energy cost with innovations like an outdoor reset in the SunStat Connect

SunTouch TapeMats come with double-sided tape on each side and an attached 10 ft powerlead

SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile. You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s) to the subfloor using the double-sided tape, secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.

Programmable Thermostat to Maintain Accuracy

• Built-in 15-amp relay controls up to 150 sq. ft. (1800 watts) at 120 V, or 300 sq. ft. (3600 watts) at 240 V
• SmartStart Technology automatically adjusts the start time of the floor warming system to ensure the floor has reached the set temperature at your scheduled time.
• Energy Use monitor shows the hours of system operation.

Make Sure Your System is Working Properly!

You can have peace of mind knowing that your floor heating system is in working order by testing the resistance of the heating elements with a Digital Multi-Meter.

Each cable has a UL tag on the power lead with a resistance (Ohm) range printed on it. Set the Multi Meter to 200 Ohms (2k if the Ohm range is over 200) and test the colored power lead wires. Then test the colored wires against the copper ground wire to make sure there is no resistance on the ground.

Product description

Now you can add the luxury and comfort of radiant heat to your home—even on a budget. WarmlyYours’ TempZone Easy Mats provide an affordable, easy-to-install way to add warmth to your tile or stone floors. The 36 in x 60 in rectangular mat operates at 120 volts to gently warm targeted areas of your floors at 15 watts per sq. ft. TempZone Easy Mats are UL Listed and include a 14 AWG cold lead. WarmlyYours backs all of our TempZone floor heating systems with a 25-year No Nonsense Warranty to ensure your comfort and satisfaction for years to come.

• USE UNDER TILE, STONE & MORE: WarmlyYours TempZone Electric Radiant Floor Heating Easy Mat is perfect for installation underneath ceramic tile, natural stone, nailed hardwood, wood, and other popular flooring materials, this no cut, one piece 15 sq. ft. mat consists of a heating cable secured with double-sided tape onto a fiber-glass mesh, and the heating cable is distributed in serpentine loops
• EASY INSTALLATION: The cable loops are 3" apart, 15 watts per sq. ft., which helps deliver even heating throughout flooring areas, never leaving cold spots in bathrooms, dressing areas, the under floor heating system allows for radiant spot heating of smaller, simpler spaces and specific areas in larger rooms at an affordable cost
• 1/8" SUPER THIN: With a 1/8" low profile twin conductor and a 14 AWG cold lead, 1 return lead, gives homeowners radiant in-floor heating that's truly luxurious without significantly raising the floor height, keeps your tile, stone or marble floors, warm and barefoot friendly all year round
• TESTED AND SAFE: The 120 VAC WarmlyYours TempZone Electric Radiant Floor Heating Easy Mats are cULus Listed

User questions & answers

Question:	does this come complete with thermostat and wall controller etc
Answer:	21 gallons
Question:	What is required to connect two mats together
Answer:	Yes it will fit under a bed cover w/out fill nozzle. There are mounting tabs on the bottom. DO NOT FORGET: There is a drain plug on the end bottom. It needs gas resistant tape on it.
Question:	Is only the mat as i can read but which thermosat is needed or suggested and is there anything else i need. The mat is going into my steam shower
Answer:	Because it need to be attached to your vehicles gas tank breather system. Gasoline evaporates and that gas is highly combustible. That makes a gas aux tank without proper ventilation a bomb.

• 60 Sqft Cable with Digital Programmable Thermostat, Electric Floor Heat Warming System
• Includes Plastic Cable Guides and Installation Monitor
• 240V, 3.0 Amps, 720W, 12 Watts/Sqft, UL Listed for USA and Canada
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-240, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 year Warranty

User questions & answers

Question:	Can this system be installed under tile in a shower enclosure with gfci protection
Answer:	Yes it will fit the Ram truck, I recommend a long bed, if installing with a fifth wheel hitch put the hitch in first. You will have to put shims under the tank to support it.
Question:	Could you use this to heat a bathroom
Answer:	According to the manufacturer you can use this tank to transfer gasoline. You just can't used to gravity feed gasoline into your vehicles factory gas tank.
Question:	what is the length on the 60 sq/ft cable
Answer:	Thank you for your interest in Spectra Premium products. Yes it does come with the lock ring and the o ring. For more information on the part you are looking for and to see the entire Spectra Premium parts offering, please visit our Ecat at www.spectrapremium.com
Question:	is there any other sensor needed or is everything included
Answer:	Thank you for your interest in Spectra Premium products. Yes, it will fit this vehicle. For more information on the part you are looking for and to see the entire Spectra Premium parts offering, please visit our Ecat at www.spectrapremium.com

Product features

Floor Heating Cable

The Electric Floor Heating Cable consists of a spool of heating cable.  Simply run the cable 3" apart across the area to heat using the cable guides to secure to the floor running the cold lead up the wall to the electrical box.  These heating systems are ideal for odd shaped areas or to heat around objects.  The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-240S

The programmable floor sensing thermostat and floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 240 volt, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system.  Connect the system leads to the monitor prior to installation.  The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar.  If the alarm sounds, stop work and consult the operation manual.  We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

CABLE GUIDES

Designed for fast installation of the the heating cable, simply loop the floor heating cable around the guide as you lay the cable system across the subfloor.

Secure the cable guides according to the planned layout using screws, nails, adhesive or glue approved for use with the given subfloor.  The heating element should be spaced 3" apart across the area to be heated.  Cable guides should be run perpendicular to heating cables.  The heating cables should have a minimum distance of 2" from walls and objects. Spacing between cable guides should not exceed 36" in distance.  Secure the heating element to cable guides by wrapping the wire around the stud.  Maintain moderate tension of cable throughout installation.  Do not twist heating element and keep the minimum bending radius of the cable to 1".

Cable guides are 12" long and can be cut to length. Includes enough cable guides for cable heating system.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Product description

This Warm Wire (R) floor warming installation kit contains everything needed for quick and economical installation of a radiant heat flooring system. It makes installation easy and will provide heat to warm the floors and help keep bathroom, kitchen and entry way floors dry and safe. This kit includes a 120 volt floor heating wire that covers a 150 square foot area when installed with 3 inch spacing, a SunTouch Programmable thermostat, cable strap, double-sided tape, Loudmouth installation monitor, and an in-depth installation manual.

• WarmWire easily installs over plywood, backerboard, or concrete slab
• Kit includes WarmWire, programmable SunStat thermostat, LoudMouth Alarm, and install accessories
• Includes heating wire to cover a 150 square foot area
• Single point power connection makes for easy layout and wiring
• Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels

User questions & answers

Question:	Can this be installed under an existing floor from the floor below, between and around the floor joists
Answer:	Hi theoretically its possible , but we advise you to call SunTouch Technical Support at 1-888-432-8932
Question:	How long is the Warmwire
Answer:	Its 391' Foot the Length of the wire, Thanks for being interested in this product.
Question:	What is the loudmouth installation monitor
Answer:	It's a device that detects a break or damage in the wire system.
Question:	How much area can i tie together for controllers and power sources? Have about 1000 square foot area wanting ti do
Answer:	Hello,Using a 120v system you can cover 150 SF on 1 circuit. With a 240v system you can cover up to 300 SF per circuit. 1 control would be need for each circuit or a relay. If you would like us to quote your project, please let us know and we will let you know exactly what you need for the job. Thanks!

Product features

Install Anytime, Anywhere

• The SunTouch product line includes options for above subfloor, between joist bay, or concrete embedded systems
• Systems are available for warming tile, stone, wood, laminate, and other floor coverings

Proven Reputation

• With over 30 years of experience designing electric floor heating systems, you can feel confident choosing a SunTouch system
• We have a proven reputation with thousands of successful installations across North America

Many Useful Features

• Options for display color themes, remote access, large touchscreens, and control of floor or air temperature
• Reduce energy cost with innovations like an outdoor reset in the SunStat Connect

Electric Floor Heating Cable

SunTouch WarmWire is a series resistance heating cable assembly for installation over plywood, backer board, or a concrete slab (according to ANSI or TCNA guidelines), and then embedded in 3/8 in. (9.5 mm) or greater self-leveling or polymer-modified thin-set mortar.

SunTouch WarmWire cables contain an electric heating wire to provide underfloor heat in bathrooms, kitchens, entryways, and other areas and are an affordable alternative to radiant heated mats. Approved for installation in shower applications where permitted. The durable, constant-diameter wire is easily secured at 2.5 in., 3 in., or 3.5 in. intervals with CableStrap. Controlled by a SunStat floor sensing thermostat (sold separately). WarmWire is available in various lengths with voltage options of 120 or 240VAC.

WarmWire Installation

WarmWire is the most flexible choice for irregularly-shaped or curved rooms and stairs. For typical installations, WarmWire is spaced at 3 inches on center. For areas with high heat loss, the spacing can be lowered to 2.5 inches for added warmth. In hallways and rooms that are well insulated, spacing can be increased to 3.5 inches on center. Controlling the level of warmth is easily accomplished with a connected SunStat Thermostat.

SunStat Thermostat

• Control your floor heating system(s)
• WiFi capability allows control of your system anytime anywhere
• 7-day scheduling capability
• Dual Voltage 120/240V with built-in GFCI for safety and energy use monitoring
• ASIN: B01JDGMGNA

LoudMouth Alarm

• Sounds an alarm if the heating wire is cut or damaged, allowing for easy repair before the mat is covered with mortar and tile
• A green light to indicate GO and a red light to indicate STOP if there's damage
• Simple operation with an on/off switch and a test button
• ASIN: B0080KWIY8

HeatMatrix

• Versatile heating cable compatibility
• Vapor management system
• Shear stress control
• Waterproof
• ASIN: B01N6ROBBY

SunTouch Trowel

• Plastic design reduces risk of damaging wire
• 3/8 inch wide x 1/2 inch deep
• U-shape notches aid in mortar distribution
• For use in electric heated floor applications
• ASIN: B005ZTMPXG

• 25 Square Foot Under Tile Heating Mat, Mat is 20” Wide x 15’ Long, 120 Volts
• Mat has double sided tape (Adhesive Backing) to stick to floor. Lays FLAT for easy installation.
• 120V, 2.5 Amp, 300W, 12 Watts/Sqft, UL Listed for USA and Canada, Cable is 1/8” thick
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 Year Warranty

User questions & answers

Question:	I need 24" x 60".. Can I route the last one feet wire along the side to increase the width to 24" and keep the length to
Answer:	Yes
Question:	I am planning to install wooden floor (hardwood or laminate) in my bathroom. Can I use this system to heat wooden floors or is is for tiles only
Answer:	I think so since the tank has not expanded.
Question:	I have a concrete slab that I would like to add electric floor heating and tile over it. How do I avoid moisture build up with this product
Answer:	Yes, I believe so, the company is based out of Perry, Florida!
Question:	Can this be used when installing a drop-in tub to keep bath water warm
Answer:	I don’t think so unless you take out the tool box. It’s about the same size as a tool box.

Product features

Floor Heating Mat

The Electric Floor Heating Mat consists of a mat with the cable heating elements pre-spaced 3" within the mat. Simply unroll the floor heating mat with the cold lead running up the wall to the electrical box. These heating systems are ideal for rectangular or square areas with right angles. You can manipulate the mat to fit the desired heating area by using the turning techniques shown below. The white fiberglass mesh may be cut to flip and turn the mat. The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat with floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volts, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• A mode controls the ambient air temperature
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system. Connect the system leads to the monitor prior to installation. The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar. If the alarm sounds, stop work and consult the operation manual. We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

ADHESIVE BACKED MAT

This heating mat has double sided tape to offer an adhesive backing that make installation a breeze. Simply fit the mat to your floor, then peal of the tape and adhere to the floor. This greatly reduces the installation time and gets you on your way to enjoying your heated floors.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Product description

A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film.

Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat.

APPROVED FLOOR COVERING MATERIALS

• All Floating Floors

• Floating Tiles

• Laminate Flooring

• Engineered Wood

• Luxury Vinyl Flooring (4mm or thicker)

• Cork and Bamboo

* Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.

Its available in four convenient rollout mat sizes that will accommodate most any layout.

Each mat has wires pre-attached for ease of installation.

• Uses an highly-efficient conductive ink technology

• Consumes up to 50% less power than traditional wired systems

• Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat

• No mortar and no mess

• Conforms to many floating floor manufacturers requirements

• Disperses an evenly consistent heat throughout the entire floor

KIT INCLUDES THE FOLLOWING

• QuietWarmth 30 Sq. ft. Electric Floor Heating System for Floating Floors - 3' x 10' - 120V

• QuietWarmth 7-Day Programmable Thermostat

• Kit includes: QuietWarmth 3' X 10 - 120V electric floor heating system & QuietWarmth 7-day programmable thermostat
• Easy installation - 3 simple step process (1. Install underlayment, 2. Roll out electric radiant heat film & 3. Install final floor covering)
• Minimal thickness profile - Ultra-thin (less than .016") heated panels keeps same floor heights through room transitions
• Provides uniform heat - Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly through the room
• Quiets your floor - used in combination with quietwalk underlayment, you achieve a superior sound rating: III 71 & STC 67
• Safety certified - ETL in compliance with UL standards for radiant flooring in the USA and Canada
• Cost less to operate - even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption
• Maintenance Free - crafted to not completely shut down If the system should ever become compromised or damaged

User questions & answers

Question:	What kind of underlayment is used
Answer:	For diesel
Question:	Can I use 240v Matt with 120v gauge wiring and circuit breaker
Answer:	Yes. It has a threaded bung hole on top on each end that are the right threads for a 12 v pump.
Question:	How much of thia would i need for a 12' x 20' room
Answer:	Yes
Question:	Can I cut this by length and join again or do I have to throw away whatever I cut
Answer:	Not that I know of think there is some law as to how large. IN my other truck I had a 70 gal made but could not find them all ready built.

Product features

3 ft. x 10 ft. x 0.016 in. 120-Volt Radiant Heat Film for Floating Wood and Laminate Floors (Covers 30 sq. ft.)

Installs easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor. The system, which sports an impressive efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout.

• Use with most floating laminate, engineered wood and floating tile floors
• Uses an highly-efficient conductive ink technology
• Disperses an evenly consistent heat throughout the entire floor
• Will not add extra height to the floor, only 0.016 in. thick
• Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
• No mortar and no mess
• Conforms to many floating floor manufacturers requirements

QuietWarmth 7-Day Programmable Thermostat for QuietWarmth Radiant Heat Systems with Built-in GFCI

Designed for underlayment applications, this MP Global Products 7-Day Programmable Thermostat makes it easy to precisely control temperature in your heated floor thanks to a floor sensor and a 4-event timer that allows the programming of automatic comfort and setback temperatures. A built-in ground fault circuit interrupter cuts power in the event of a power surge, helping to protect your floor and radiant system from damage and shield you from injury.

• 7-day (5-and-2) scheduling with 4 programming periods per day for consistent heating and cooling patterns
• Floor sensor monitors temperature to deliver accurate control for your heated floor
• Allows Fahrenheit and Celsius read-out settings for convenient reference
• Built in ground fault circuit interrupter cuts power in the event of a power surge, helping to protect you, your floor and your radiant system
• Compatible with most 120/240-Volt radiant floor heating systems
• 120-Volt power source recommended for heated underlayment applications

Provides uniform heat and cost less to operate

Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly throughout the room. Even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption. Also the heat will never exceed 85 degree F, allowing your feet to have the perfect temperature.

Note: This kit will only work with QuietWarmth 120V systems.

There is no easier radiant floor heating system to install.

Simple 4 step process!

1. Install underlayment.
2. Roll out electric radiant heat film
3. Hook up electric wiring
4. Install final floor covering

Approved Floor Covering Materials

• All Floating Floors
• Floating Tiles
• Laminate Flooring
• Engineered Wood Flooring
• Luxury Vinyl Flooring (4mm or thicker)
• Cork and Bamboo

* Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.

Product description

HeatTech Electric Radiant Floor Heating Cable is perfect for:

Tile, Stone, Granite and Marble floors

Bathrooms, Kitchens, Showers, Saunas and others

Both new construction and retrofits

Residential homes and apartment buildings

Whole house heating

What's included:

Electric radiant heating cable on a spool

Cable guides – 25ft roll is required for every 200ft of cable

Detailed installation manual

Honeywell/Aube TH115-AF-120S thermostat with floor sensor



Features:

HeatTech floor heating cable is UL listed for USA (complies with electrical safety standards).

Heating cable is only ~1/8" thick and will not raise the finished floor significantly.

Zero Electromagnetic Field.

Made using the highest quality materials in the industry.

Comes with a single armored 10ft long cold lead wire for easy connection to the thermostat – no extra wiring or drilling.



Benefits:

Helps to create incomparable levels of comfort

Fast & easy to install

Energy-efficient

Compatible with all brands of domestic floor sensing thermostats, including Honeywell/Aube and many others;



Sizing & Installation:



Sizing is easy – simply select a HeatTech cable with area coverage which corresponds to the size of the heated area.

120V system allows for installation of up to 600ft of heating cable (150 sq. ft. at 3” spacing) on a single thermostat.

System allows to connect up to 3 separate cable runs to a single thermostat to match the size of the heated area.

Installing cable at 3” spacing is recommended for optimal heat output.

• Area Coverage: 15 sqft @ 2" spacing; 20 sqft @ 3" spacing (recommended), 25 sqft @ 4" spacing.
• Heating Cable Length: 80ft + cold lead (10ft)
• Voltage: 120V; Output: 240W (3W/ft.); Amperage: 2 Amps
• Heating cable is only ~1/8" thick and will not raise the floors significantly.
• UL listed for USA and comes with a 25-year Manufacturer Warranty

User questions & answers

Question:	is this the right product for tile over concrete slab floor
Answer:	Yes it is
Question:	I screwed up and didn't embed the thermostat thermometer wire into the floor. Is there anything I can do to control the temp w/o tearing up floor
Answer:	The thermostat can run on the ambient setting.
Question:	can you link this to another system? i have a 3x5 matt called perfectly warm tile floor heat i was planning on installing
Answer:	Avoid mixing different brands of heating mats/cable, as it will automatically void the warranty for both.
Question:	Can this wire also be installed under the tile in the shower
Answer:	Don't see why not, as long as it's properly encased in cement. We pour a layer of flour leveling cement over our installs.

Product description

DHEHK12032 Ditra Heat Floor Heating Cable

Schluter-Ditra-Heat is a modern, advanced under-tile floor heating system. A significant refinement of the underfloor heating systems of the last decade, Ditra Heat is the next generation of heating cables that delivers improved durability, heightened efficiency, and simplified installation process that saves you time.

The Schluter Heated Floor System is designed for instalation that takes a few hours and delivers comfort that lasts a lifetime.

The Schluter Ditra heating cable's layout can be customized to fit any space in your house regardless of the room shape or the appliaces location. Since it is no longer necessary to loop the cable back to the thermostat, customizing your heated floor layout is easier than ever.

Schluter Ditra Heat cables are twisted pair heating cables that are compatible with the DITRA-HEAT uncoupling membrane (Sold Separately) that makes cable layout as easy as clicking the heating cable in, and provides additional benefits such as uncoupling, vapor management, and tile crack prevention.

Technical Specifications

• 120 Volts
• 3.4 Amps
• 405 Watt power output.
• 32 Square Feet Coverage
• 105.8 Linear Feet Cable Length

• TECHNICAL SPECIFICATIONS – 120 Volts, 3.4 Amps, 405 Watt power output. The cable provides 32 Square Feet of Coverage, Total Cable Length is 105.8 Linear Feet. Specially designed for integration with the Ditra-Heat uncoupling membrane in interior floor warming applications.
• EFFICIENCY - High power output of 15 watts, with high level of conductivity resulting in minimal amount of energy loss.
• INSTALLATION - The cables can be installed without returning to the thermostat and produce virtually zero electromagnetic fields. The heat cable may be spaced at continuously 3 stud intervals or alternating 3 stud – 2 stud – 3 stud internals in isolated areas or over the entire floor.
• SAFETY – Contains Suntouch Loudmouth electrical fault indicator, which sounds an alarm if the heating wire is cut or damaged during installation. This allows for immediate identification of a problem before the heating cable is tiled over.
• WARRANTY – Ditra Heat Cable is covered by the 15-year Schluter Systems manufacturers warranty when installed in accordance to the installation handbook.

User questions & answers

Question:	I need the 16 foot cable. why can"t it be sent to my address? I already have cable but it is wrong size
Answer:	48 inches wide.
Question:	Are there 2 temperatute sensors included
Answer:	I think so but not sure

Product description

The SunStat thermostatic sensor provides accurate sensing of floor temperatures

• 0
• Connects directly to SunStat relay
• SmartStart technology
• Four preset program schedules

User questions & answers

Question:	Will this work for 500875 model
Answer:	Only one line is required, the other is an extra. I used the shorter one that came attached to the white tank. Bob
Question:	Is this item "for suntouch" (generic) or an actual suntouch 500110 sensor
Answer:	Actually it wasn't too bad...I dislike putting "things" together so much that I usually won't purchase something that requires it. But I took a chance and set aside a couple hours when it came & got it done. The directions are pretty clear but I'd suggest reading them twice & then laying out the parts so you can eyeball everything as you go along. I've only used it once but I had my driveway, steps, and a stone patio in the back that was so slippery when it rained that walking on any part became dangerous. Good machine and took me bout 5-6 hours(over 2 days) but it powered through everything and these areas have never been so clean and bright. I'd recommend it.
Question:	Will this work with the sun touch 500675 model
Answer:	I bought this solely because it had a Honda engine, and I was excited to get it because it was inexpensive for a Honda, but I returned it and bought another pressure washer because this pressure washer was poorly constructed. I was extremely disappointed to have to return it. It started similar to any Briggs and Stratton engine, a Honda.
Question:	Will this cord work for any of the older suntouch thermostat units
Answer:	I don't know the exact dimensions but it fits perfectly in a full size pickup bed.

• Listed and Safe for Wet Locations. Thin heating element profile ~1/8" thick. Highest Quality Heating Cable Designed for Longevity by USA Manufacturer with 20 years industry experience.
• Includes Required GFCI Programmable Touchscreen Thermostat with Floor Sensor for maximum efficiency.
• Complete Kit with testing/monitoring devices, mounting/installation hardware, and trowel.
• ETL Listed for US & Canada - Limited Lifetime Warranty on Heating Element - 3 Year Limited Warranty on thermostat.
• 20 Square Feet - 120 Volts - Amps:2 - Watts: 240 - 15 ft Cold Lead - 12 Watts/Sqft - 20 Inches Wide x 12.2 Feet Long.

User questions & answers

Question:	Is the thermostat wifi capable? If not, can i use any thermostat with the flooring system
Answer:	The thermostat that comes with this kit is not WIFI capable, however, we do offer a WIFI model as an upgrade option. Please contact us for more information 1-888-239-1232.
Question:	can this be wired with a GFCI already present protecting the circuit
Answer:	Yes, that's not a problem.
Question:	Does this work with 220v
Answer:	Hello, this one is designed for 120V, but we do have 240V Heatwave Kits on Amazon also.
Question:	Since there are two mats, how are they interconnected? There's a big difference between connected in the thermostat box or inline
Answer:	Both mats need to be wired directly to the thermostat to function properly.

Product features

Touchscreen Programmable Thermostat

The M429-TS is a sleek, touchscreen floor-warming, programmable thermostat that includes the safety of built-in GFCI protection with the accuracy of a standard floor sensor and several programming modes, schedules and events.

Monitoring Your Installation

The Heatwave Premium Kit comes with a floor alarm that once installed, monitors the heating element for damage. Floor alarm (sometimes known as a "screamer") is a battery-operated device that monitors for breaks in continuity along the entire floor heating cable and if the circuit is broken, the device "screams," allowing for damage to be assessed and proper remedies to be taken.

Trowel

Using a metal trowel can be risky if the heating element accidentally gets knicked or cut. Ideally, using a plastic trowel is the best bet, however they can be hard to find. We've included this plastic trowel to take away the concerns about knicks/damage, while making the solution easy and convenient.

Easy-to-use Digital Multimeter

With this easy-to-use digital multimeter, checking the pre, during, and post condition of the heating element is easy and fast. No more wondering which meter will work or give the appropriate readings. Follow the instructions in the Heatwave Manual to check resistance, ground, and the sensor easily and efficiently.

Single-Gang Electrical Box

No more wondering about what size box to use for the thermostat. We include a single-gang, old-work style electrical box with every Heatwave Premium Kit.

Extra Mounting Hardware

Sometimes when installing the Heatwave system, it would be nice to have clips to be able to accommodate special installations outside of the mat configuration or when using the free-roll cable. These clip kits with nails allow the installer to make custom runs of cable to go around obstacles, or go into hard to reach places.

Be sure to get the right size!

Heatwave comes in various sizes to accommodate differing size spaces. It is important to accurately measure the space you intend heat. Avoid placing the heating cable under vanities, within 6-inches of the toilet gasket and under other permanent fixtures in the space. It is acceptable to place Heatwave in a shower, provided that is still fully embedded in a thinset/or Mortar.

Be aware the heating cable cannot be cut or shortened in anyway.