12 best electric infloor heats

• 15 Square Foot Under Tile Heating Mat, Mat is 20” Wide x 9’ Long, 120 Volts
• Mat has double sided tape (Adhesive Backing) to stick to floor. Lays FLAT for easy installation.
• 120V, 1.5 Amp, 180W, 12 Watts/Sqft, UL Listed for USA and Canada, Cable is 1/8” thick
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 Year Warranty

User questions & answers

Question:	I need 24" x 60".. Can I route the last one feet wire along the side to increase the width to 24" and keep the length to
Answer:	the 100x150mm that are Square/Rectangular Size: 4x6in. are too long for this case
Question:	I am planning to install wooden floor (hardwood or laminate) in my bathroom. Can I use this system to heat wooden floors or is is for tiles only
Answer:	I can just squeeze three Tiffen 77mm sized cases in this pouch but the front flap will barely close. Bower filter cases are even larger and are a real stretch to make fit.
Question:	I have a concrete slab that I would like to add electric floor heating and tile over it. How do I avoid moisture build up with this product
Answer:	Yes, it can, but you may find it too large for the 40.5 size and therefore not as convenient to use? I use it for 77mm filters and they fit very inside perfectly. It is very well made and I really like it.
Question:	Can this be used when installing a drop-in tub to keep bath water warm
Answer:	The belt loop is a sewn on nylon belt that closes with Velcro. The Velcro "pinches" the belt strap on both top and bottom -- it Velcro's to the body of the pack then a flap comes over and secures the closure from the other side. It is locked so well it is kind of difficult to get off. I am pretty satisfied with its security, BUT, I never use it on my belt. I keep it in my camera bag.

Product features

Floor Heating Mat

The Electric Floor Heating Mat consists of a mat with the cable heating elements pre-spaced 3" within the mat. Simply unroll the floor heating mat with the cold lead running up the wall to the electrical box. These heating systems are ideal for rectangular or square areas with right angles. You can manipulate the mat to fit the desired heating area by using the turning techniques shown below. The white fiberglass mesh may be cut to flip and turn the mat. The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat with floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volts, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• A mode controls the ambient air temperature
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system. Connect the system leads to the monitor prior to installation. The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar. If the alarm sounds, stop work and consult the operation manual. We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

ADHESIVE BACKED MAT

This heating mat has double sided tape to offer an adhesive backing that make installation a breeze. Simply fit the mat to your floor, then peal of the tape and adhere to the floor. This greatly reduces the installation time and gets you on your way to enjoying your heated floors.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Product description

HeatTech Electric Radiant Floor Heating Cable is perfect for:

Tile, Stone, Granite and Marble floors

Bathrooms, Kitchens, Showers, Saunas and others

Both new construction and retrofits

Residential homes and apartment buildings

Whole house heating

What's included:

Electric radiant heating cable on a spool

Detailed installation manual

Aube TH115-AF-120S 7-day programmable thermostat with floor sensor.

Features:

HeatTech floor heating cable is UL listed for USA (complies with electrical safety standards).

Heating cable is only ~1/8" thick and will not raise the finished floor significantly.

Zero Electromagnetic Field.

Made using the highest quality materials in the industry.

Comes with a single armored 10ft long cold lead wire for easy connection to the thermostat – no extra wiring or drilling.

Benefits:

Helps to create incomparable levels of comfort

Fast & easy to install

Energy-efficient

No expensive equipment to buy or maintain (such as boilers, valves, circulators, controls or others typical for water heating systems)

Compatible with all brands of domestic floor sensing thermostats, including Honeywell/Aube and many others

Sizing & Installation:

Sizing is easy – simply select a HeatTech cable with area coverage which corresponds to the size of the heated area

120V system allows for installation of up to 600ft of heating cable (150 sq. ft. at 3” spacing) on a single thermostat

240V system allows for installation of up to 1200ft of heating cable (300 sq. ft. at 3” spacing) on a single thermostat

Installing cable at 3” spacing is recommended for optimal heat output

• Area Coverage: 10 sqft @ 2" spacing; 15 sqft @ 3" spacing (recommended), 20 sqft @ 4" spacing.
• Heating Cable Length: 60ft + cold lead (10ft)
• Voltage: 120V; Output: 180W (3W/ft.); Amperage: 1.5A;
• Heating cable is only ~1/8" thick and will not raise the floors significantly.
• UL listed for USA and Canada. 25-year Warranty

User questions & answers

Question:	What temperature does the cable reach
Answer:	Cable temperature is controlled by a thermostat. Default setting - 82F. Max - 104F.
Question:	is this installed on top of tile backer board
Answer:	Yes, it is secured to the backer board (cement board) using included cable guides.

Product description

DHEHK240145 Ditra Heat Floor Heating Cable

Schluter-Ditra-Heat is a modern, advanced under-tile floor heating system. A significant refinement of the underfloor heating systems of the last decade, Ditra Heat is the next generation of heating cables that delivers improved durability, heightened efficiency, and simplified installation process that saves you time.

The Schluter Heated Floor System is designed for instalation that takes a few hours and delivers comfort that lasts a lifetime.

The Schluter Ditra heating cable's layout can be customized to fit any space in your house regardless of the room shape or the appliaces location. Since it is no longer necessary to loop the cable back to the thermostat, customizing your heated floor layout is easier than ever.

Schluter Ditra Heat cables are twisted pair heating cables that are compatible with the DITRA-HEAT uncoupling membrane (Sold Separately) that makes cable layout as easy as clicking the heating cable in, and provides additional benefits such as uncoupling, vapor management, and tile crack prevention.

Technical Specifications

• 240 Volts
• 7.7 Amps
• 1840 Watt power output.
• 145 Square Feet Coverage
• 480.5 Linear Feet Cable Length

• TECHNICAL SPECIFICATIONS – 240 Volts, 7.7 Amps, 1840 Watt power output. The cable provides 145 Square Feet of Coverage, Total Cable Length is 480.5 Linear Feet. Specially designed for integration with the Ditra-Heat uncoupling membrane in interior floor warming applications.
• EFFICIENCY - High power output of 15 watts, with high level of conductivity resulting in minimal amount of energy loss.
• INSTALLATION - The cables can be installed without returning to the thermostat and produce virtually zero electromagnetic fields. The heat cable may be spaced at continuously 3 stud intervals or alternating 3 stud – 2 stud – 3 stud internals in isolated areas or over the entire floor.
• SAFETY – Contains Suntouch Loudmouth electrical fault indicator, which sounds an alarm if the heating wire is cut or damaged during installation. This allows for immediate identification of a problem before the heating cable is tiled over.
• WARRANTY – Ditra Heat Cable is covered by the 15-year Schluter Systems manufacturers warranty when installed in accordance to the installation handbook.

User questions & answers

Question:	Can cut any length or has to be whole rolls to apply 240v power
Answer:	You can’t cut the cable it would void the warranty and be hard to test against the factory readings.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR, WITHOUT COMPROMISING ON COMFORT

LuxHeat's wide range of 120v and 240v loose-lay Cables & Strapping, offer the ultimate in design flexibility,

allowing for custom configurations and easy installations

KIT INCLUDES:

✔ Heating Cable

✔ Cable guides/Strapping-Devi by Danfoss

✔ Cable Monitor-with Batteries

BEST SUITED FOR:

★ Residential, Office apartments and Senior living facilities

★ Installs under tile, stone, marble, laminate and engineered wood floors

HEATING CABLE FEATURES:

✔ 10 Year manufacturer’s warranty

✔ UL listed for USA, classified as safe for Wet Locations

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire

✔ Heater wire is less than1/8” thick, ensures minimal effect on finished floor height

✔ Ultra low EMF (Electromagnetic Field) Dual conductor Tech, Alu foil sheath and ground wire

✔ ETFE insulated and covered by tough outer jacket, providing protection against abrasion and corrosion

THERMOSTAT FEATURES:

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Dual voltage(120v & 240v)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ Large backlit display with Intuitive menu

✔ Other Modes: Child lock, Manual override & more

✔ 7-Day Program, can be customized to suit one’s lifestyle

BENEFITS:

✔ Recommended by health professionals for allergy sufferers

✔ Safe for children, elderly and pets - No hot, exposed or moving parts

✔ Accurate and intelligent control ensures your personal comfort and affordability

✔ Out of sight, no unattractive plug-in heaters, no storage hassles, no maintenance and no smell

WATT DENSITY:

★ 14.00w/sqft @ 2.6"

★ 12.00w/sqft @ 3"

★ 9.00w/sqft @ 4"

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat floor heating cable is best suited for installation under Tile, Stone, Laminate and Engineered Wood flooring. Heated floor kits Include - Heating Cable, OJ Microline Programmable Thermostat with Dual Sensing and Built-in GFCI (ground fault protection) # UDG-4999, Cable Guides/Strapping, and Cable Monitor/Alarm to provide peace of mind when installing heater wire.
• VERSATILE - LuxHeat's range of loose lay/ free-form underfloor Heating Cables and Cable Guides offers unlimited design flexibility. Customized configurations ensure warm floors for any shape or size room. Dual conductor/Single point power connection makes for easy wiring. Heating wire at less than 1/8" diameter ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - With a combined experience of over 50 years, the LuxHeat tech team offers a wide range of high quality, UL Certified products . Heaters carry a 10-Year Manufacturers warranty, providing Peace of Mind and an assurance of performance for many years to come. LuxHeat radiant floor heat Cables and mats are UL approved and Safe for Wet Locations.
• PROGRAMMABLE THERMOSTAT - The OJ Microline UDG promotes sleek modern design and intuitive control, making it easy to install and easy to use. The 240 Volt, 15 amp thermostat includes a Built-in 'Class A' GFCI (ground fault protection), Air sensor, External floor sensor, and Dual sensing capabilities. Features include power logging, child lock, a 7-day Program Schedule, providing maximum comfort, while reducing operating costs. cULus approved for USA and Canada. 3-year Factory Warranty.
• TECHNICAL DETAILS - Cable Length: 800ft. 2400watts (240v), 10.0 Amp. Coverage: 200 Sqft @ 3" spacing - 12w/Sqft. Dual wire technology, and drain wire with Aluminium sheath, ensures ultra low EMF. Single armoured cold lead. LuxHeat - Providing the right under tile floor heating system for you.

User questions & answers

Question:	How well would this work installed on the underside of an RV with some kind of thin insulation over it
Answer:	I don’t think this wire is designed to be out in the open, but I’m not totally sure. Sorry I couldn’t be more help.
Question:	What should I put under the wiring to make sure it is efficient
Answer:	Hello, there is a good floor insulator called Cerazorb. Cerazorb is a synthetic Cork, it has all the thermal insulation properties of cork but being a synthetic product, it has none of the disadvantages of a natural product.
Question:	Does 200sqf comes in 120V already prewired for 120 no way to run 240V right now
Answer:	Hello, the 200sqft only comes in the 240volt, however we have the 10sqft - 100sqft in a 120volt option. You can connect 2 x 100sqft cables in parallel. The 100sqft cable is rated at 1200watt, a thermostat can handle 1800watts aon a 120volt circuit. If you plan to connect 200sqft of heating in 120volt you'll need to include 15amp power relay to help carry the load. The max you can connect to a single thermostat on a 120volt system is 1800watts which equals 150sqft of LuxHeat floor heating. However when using a 240volt circuit the max wattage per thermostat becomes 3600watts, which equals 300sqft of LuxHeat floor heating. For all our kits you can search LuxHeat Floor Heating in Amazon.

Product description

A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film.Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat.APPROVED FLOOR COVERING MATERIALS• All Floating Floors• Floating Tiles• Laminate Flooring• Engineered Wood• Luxury Vinyl Flooring (4mm or thicker)• Cork and Bamboo Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation.Its available in four convenient rollout mat sizes that will accommodate most any layout. Each mat has wires pre-attached for ease of installation.• Uses an highly-efficient conductive ink technology• Consumes up to 50% less power than traditional wired systems• Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat• No mortar and no mess• Conforms to many floating floor manufacturers requirements• Disperses an evenly consistent heat throughout the entire floor

• EASY INSTALLATION - 3 Simple Step Process (1. Install Underlayment, 2. Roll Out Electric Radiant Heat Film & 3. Install final floor covering)
• MINIMAL THICKNESS PROFILE - Ultra-thin (less than .016") heated panels keeps same floor heights through room transitions
• PROVIDES UNIFORM HEAT - Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly through the room
• QUIETS YOUR FLOOR - Used in combination with QuietWalk underlayment, you achieve a superior sound rating: IIC 71 & STC 67
• SAFETY CERTIFIED - ETL in compliance with UL Standards for radiant flooring in the USA and Canada
• COST LESS TO OPERATE - Even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption
• MAINTENANCE FREE - Crafted to not completely shut down if the system should ever become compromised or damaged
• MAT SIZE: 3 ft x 10 ft - 120V

User questions & answers

Question:	Can i cut it in half and use both pieces
Answer:	It will work perfectly. It's designed for a scenario just like yours.
Question:	Cannot be used under a rug instead of flooring in a cold entry hall
Answer:	720 watt has a larger surface area than 500 watt size thus more wiring to cover the mat. The warmth output and temperatures is the same for all 3 sizes.
Question:	Do I need to buy a thermostat to control it? Or can it be connected to a switch? Just on and off
Answer:	Would you have access to the control switch? You would need to have the anti slip pad to keep the Hot Carpet from sliding. The pads does offer some protection depending on the brand you get. I have had mine on Hard floor for years and I have not had any discoloration and have not had any complaints from other users . If your worried that it might warp the standard 3/4 inch oak floor boards that would not happen. Your other worry could be discoloration and if that's the case I would play if safe and not use the product
Question:	Can these be cut and wired in a series to one thermostat
Answer:	I went and bought a Utilitech #0224879 timer from Lowes Home Improvement store 24 hour repeating cycle programmable in 30-minute interval for about $10.00.Programmed the timer for the desired on/off time set the current time, next I plugged the timer into the wall followed by plugging the mat cord into the timer. Make sure you leave the mat in the on position when you plug the mat into the timer.Waited for a while to see if the mat would turn off/on with the settings I decided on and it worked like a charm.Yes, the Hot Carpet will work fine using a timer!The Cord from the controller box to end of the plug is about 62 inches.

Product features

120-Volt Radiant Heat Film for Floating Wood and Laminate Floors

Installs easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12 watts per square foot to gently raise the temperature of the floor. The system, which sports an impressive efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout.

• Use with most floating laminate, engineered wood and floating tile floors
• Uses an highly-efficient conductive ink technology
• Disperses an evenly consistent heat throughout the entire floor
• Will not add extra height to the floor, only 0.016 in. thick
• Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
• No mortar and no mess
• Conforms to many floating floor manufacturers requirements

Provides uniform heat and cost less to operate

Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly throughout the room. Even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy consumption. Also the heat will never exceed 85 degree F, allowing your feet to have the perfect temperature.

• 120V mats work with QuietWarmth 120V systems. 240V will work with 240V.

There is no easier radiant floor heating system to install.

Simple 4 step process!

1. Install underlayment.
2. Roll out electric radiant heat film
3. Hook up electric wiring
4. Install final floor covering

Floor Covering Materials

• All Floating Floors
• Floating Tiles
• Laminate Flooring
• Engineered Wood Flooring
• Luxury Vinyl Flooring (4mm or thicker)
• Cork and Bamboo

Note: Refer to Floor Covering Manufacturer's specifications for compatibility of their product over any radiant heat before installation

Product description

HeatTech Electric Radiant Floor Heating Cable is perfect for:

Tile, Stone, Granite and Marble floors

Bathrooms, Kitchens, Showers, Saunas and others

Both new construction and retrofits

Residential homes and apartment buildings

Whole house heating

What's included:

Electric radiant heating cable on a spool

Cable guides – 25ft roll is required for every 200ft of cable

Detailed installation manual

Honeywell/Aube TH115-AF-120S thermostat with floor sensor



Features:

HeatTech floor heating cable is UL listed for USA (complies with electrical safety standards).

Heating cable is only ~1/8" thick and will not raise the finished floor significantly.

Zero Electromagnetic Field.

Made using the highest quality materials in the industry.

Comes with a single armored 10ft long cold lead wire for easy connection to the thermostat – no extra wiring or drilling.



Benefits:

Helps to create incomparable levels of comfort

Fast & easy to install

Energy-efficient

Compatible with all brands of domestic floor sensing thermostats, including Honeywell/Aube and many others;



Sizing & Installation:



Sizing is easy – simply select a HeatTech cable with area coverage which corresponds to the size of the heated area.

120V system allows for installation of up to 600ft of heating cable (150 sq. ft. at 3” spacing) on a single thermostat.

System allows to connect up to 3 separate cable runs to a single thermostat to match the size of the heated area.

Installing cable at 3” spacing is recommended for optimal heat output.

• Area Coverage: 20 sqft @ 2" spacing; 30 sqft @ 3" spacing (recommended), 40 sqft @ 4" spacing.
• Heating Cable Length: 120ft + cold lead (10ft)
• Voltage: 120V; Output: 360W (3W/ft.); Amperage: 3 Amps
• Heating cable is only ~1/8" thick and will not raise the floors significantly.
• UL listed for USA and comes with a 25-year Manufacturer Warranty

User questions & answers

Question:	How do you secure the wire
Answer:	The heating wire can be secured to a subfloor with the cable guides (metal strap on a picture). Or with hot glue, or hvac tape (aluminum foil tape) - these are not included in a kit.
Question:	There are two different pictures shown for the thermostat controller. Which one comes with the product
Answer:	From what I can see in the pics, the 3rd picture just shows the thermostat with the 2 side covers, which hide the settings buttons, open. We have this system at home and the thermostat is as it appears in the pictures. The sides do open and close to reveal the buttons. Hope that helps!
Question:	Can you add more wire to increase the square footage? Or does that controller only cover 30 square feet
Answer:	The maximum combined load per one thermostat is 15.0 Amps. This allows to control up to 150sqft (1,800 Watts) per thermostat using 120V heating system, or up to 300sqft (3,600 Watts) per thermostat using 240V heating system. 30sqft, 120V cable has 3 Amps load. You can add up to 12 Amps or 120sqft, 120V. Multiple cables must be wired to the thermostat in parallel.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

LuxHeat's wide range of 120v and 240v Heating Mats offer the ultimate in design flexibility - Mats can be cut, turned,

flipped, and when necessary, wires can be removed from the mesh to accommodate any room shape or size.

The remote WLAN connectivity feature gives users convenient, easy-to-use access to adjusting and  monitoring their

home heating system – from any location. Compatible with iPhone, Android and accessible from a web browser.

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

HEATING MAT FEATURES:

✔ 10 Year manufacturer’s warranty

✔ Double insulated, single cold lead

✔ UL listed for USA, classified as safe for Wet Locations

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire

✔ Heater wire is less than1/8” thick, ensures minimal effect on finished floor height

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ GFCI

✔ c UL us Listed

✔ Wifi - Remote access

✔ Dual Sensing, Dual Voltage

✔ Retains program memory for 5 years

✔ Load: 15A-1800w@120v, 3600w@240v

✔ 3.5” Colour screen with easy interactive Touch control

✔ 7-Day Program, can be customized to suit one’s lifestyle

CABLE MONITOR: Includes AAA batteries

BENEFITS:

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. Installs under Tile, Stone, Laminate and Engineered wood floors. Kit Includes 10sqft Heating Mat, Wifi Programmable Touch Screen Thermostat with Floor Sensor and built-in GFCI # UWG4-4999, and Installation Cable Monitor/Alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated, ensuring warmth in the desired areas. With Self-adhesive mesh on one side and double sided tape on the other, the mat stays flat even when flipped over. Single point power connection makes for easy wiring. Less than 1/8" Cable diameter ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - Combined experience of over 50 years, the LuxHeat Tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty, providing Peace of Mind and an assurance of performance for many years to come. LuxHeat' radiant floor heat Cables and mats are UL listed and Safe for Wet Locations.
• WiFi PROGRAMMABLE Radiant Floor Heating Thermostat with Built-in GFCI, 120 Volt, Dual sensing (Air & Floor), includes floor sensor. WIFI feature allows you to both monitor and control the thermostat remotely from a web browser, Android or iOS smartphone or tablet – anytime – anywhere. 7 day program scheduling helps to provide maximum comfort, while reducing operating costs. Load capacity of 15amps. 3 year limited Manufacturer warranty.
• TECHNICAL DETAILS for Heated Mat - Size: 30 Sqft (20" x 18.30'), 12w/Sqft @ 3" wire spacing's (120v) 360w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	Do you have installation instructions you can send
Answer:	Hello, we have all instructions available online @ proluxmaterials.com, alternatively send me an email and i'll insert the links. My email is [email protected].
Question:	Where do i find distributor id?floor installed and can’t program it with out this number
Answer:	Hello, the Distributor ID for the OJ Microline UWG4 thermostat is 20060
Question:	I need a 25sqft and a 20sqft. Do you have any 20 sqft systems? 120 volt similar to the 25 sqft system you have here
Answer:	Hello, yes our 120 volt Luxheat floor heating mat starts at 10sqft and goes up to 100sqft, and our 240 volt range starts at 35sqft and goes up to 200sqft.
Question:	Can the end of the heating wire be cut if I don't need all of it
Answer:	Hello, the red heating wire cannot be cut, however if you start to run out of space you can remove the heater wire from the mat and lay it in the open spaces. Important: At no point must the heating wires cross, and make sure your wires are at least 1 inch apart.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated

LuxHeat mats can be cut, turned, flipped, or have wires removed to accommodate any room shape or size

Controlled by OJ Microline's Intuitive Programmable thermostat to become one of the most versatile, easy to install heating systems

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

★ Can be installed as primary or secondary heat source

HEATING MAT FEATURES:

✔ Zero EMF (Electromagnetic Field)

✔ Double insulated, single cold lead

✔ UL listed for USA, suitable for wet locations

✔ Twin conductors, Alu foil sheath and ground wire

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Dual voltage(120v & 240v)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ Large backlit display with Intuitive menu

✔ Other Modes: Child lock, Manual override & more

✔ Compatible with most radiant Floor Heating Systems

✔ 7-Day Program, pre-set program can be customized to suit one’s lifestyle

Cable Monitor: Includes batteries

BENEFITS:

✔ Versatile, Fast & Easy to install, Easy to Use

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

 

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. Installs under Tiles, Stone, Laminate and Engineered wood floors. Kit Includes 20sqft Heating Mat, GFCI Programmable Thermostat with Floor Sensor and Installation Cable Monitor/alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated, ensuring warmth in the desired areas. With Self-adhesive mesh on one side and double sided tape on the other, the mat stays flat even when flipped over. Less than 1/8" Cable diameter ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - Combined experience of over 50 years, the LuxHeat tech team offers a wide range of high quality, UL Certified products . A 10-Year Manufacturers warranty's - providing peace of mind and an assurance of performance for many years to come. UL listed as Safe for Wet Locations.
• PROGRAMMABLE THERMOSTAT - The OJ Microline Intuitive Programmable, 120 Volt, Dual sensing (Air & Floor), promises great value for money. The 7-day Program Schedule provides maximum comfort, while reducing operating costs. Includes: Class A GFCI, Power logging, Child Lock, UL Listed, 3-year Factory Warranty & more. 10Kohm Floor Sensor included.
• TECHNICAL DETAILS for Heated Mat - Size: 20 Sqft (20" x 12.20'), 12w/Sqft @ 3" wire spacing's (120v) 240w, 2amps. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	What size breaker do you need for the 240V 200 Sqft mat? I am assuming double pole 20 amp breaker
Answer:	Hello, the 240volt 200sqft mat draws 2400watts (2.4kw) with a load of 10amps. A breaker of 15amps or more will be sufficient, however electrical codes vary by area so it's always best to ask a local professional.
Question:	Self leveling mortar
Answer:	Hello, yes you can use Self leveling mortar or thinset.
Question:	Does this have to be set in mortar
Answer:	Hello, yes the floor heating mat must be set in mortar or a self-leveling screed as this ensure even heat distribution.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated

LuxHeat mats can be cut, turned, flipped, or have wires removed to accommodate any room shape or size

Controlled by OJ Microline's Intuitive Programmable thermostat to become one of the most versatile, easy to install heating systems

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

★ Can be installed as primary or secondary heat source

HEATING MAT FEATURES:

✔ Zero EMF (Electromagnetic Field)

✔ Double insulated, single cold lead

✔ UL listed for USA, suitable for wet locations

✔ Twin conductors, Alu foil sheath and ground wire

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Dual voltage(120v & 240v)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ 5 year battery backup, retains all settings

✔ Other Modes: Child lock, Manual override & more

✔ 3.5” Colour screen with easy interactive Touch control

✔ 7-Day Program, pre-set program can be customized to suit one’s lifestyle

Cable Monitor: Includes batteries

BENEFITS:

✔ Versatile, Fast & Easy to install, Easy to Use

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

 

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. Installs under Tiles, Stone, Laminate and Engineered wood floors. Kit Includes 25sqft Heating Mat, GFCI Programmable Thermostat with Floor Sensor and Installation Cable Monitor/alarm, for ultimate peace-of-mind.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated, ensuring warmth in the desired areas. With Self-adhesive mesh on one side and double sided tape on the other, the mat stays flat even when flipped over. Less than 1/8" Cable diameter ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - Combined experience of over 50 years, the LuxHeat tech team offers a wide range of high quality, UL Certified products . A 10-Year Manufacturers warranty's - providing peace of mind and an assurance of performance for many years to come. UL listed as Safe for Wet Locations.
• PROGRAMMABLE THERMOSTAT - The OJ Microline Intuitive, Programmable, Touch Screen, 120 Volt, Dual sensing (Air & Floor) is among some of the top Thermostats of today. 7-day Program Scheduling helps to provide maximum comfort, while reducing operating costs. Includes: Class A GFCI, Self-learning, Power logging, Child Lock, 5-year battery back-up, UL Listed, 3-year Factory Warranty & more
• TECHNICAL DETAILS for Heated Mat - Size: 25 Sqft (20" x 15.20'), 12w/Sqft @ 3" wire spacing's (120v) 300w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	Is this thermostat Wi-Fi compatible
Answer:	Hello, the OJ Microline UDG4 thermostat is a Programmable Touch Screen without wifi, however we have another mat kit with the Wifi version - UWG4, you'll find all our listings under LuxHeat Floor Heating.
Question:	Is there a Minimum vinyl plank thickness required to put this under
Answer:	Hello, a thin vinyl plank does not allow for the best heat distribution simply because of it's lack of substance, however if the cables are well covered with self-leveling compound the heat is then distributed throughout the screed, thus providing an even heat distribution. There are many different vinyl planks all with different densities so it's always best to check with the vinyl manufacturer to see if their product is compatible with floor heating.
Question:	There is no proluxmaterials website, so where is installation guidlines link
Answer:	Hello, the links are all online at https://proluxmaterials.com, if you not able to locate the site you welcome to send me a mail at [email protected], I'll reply with the instruction manual links.
Question:	Installation guide link
Answer:	Hello, please refer to proluxmaterials site for installation videos and instruction downloads.

Product description

DHEHK12032 Ditra Heat Floor Heating Cable

Schluter-Ditra-Heat is a modern, advanced under-tile floor heating system. A significant refinement of the underfloor heating systems of the last decade, Ditra Heat is the next generation of heating cables that delivers improved durability, heightened efficiency, and simplified installation process that saves you time.

The Schluter Heated Floor System is designed for instalation that takes a few hours and delivers comfort that lasts a lifetime.

The Schluter Ditra heating cable's layout can be customized to fit any space in your house regardless of the room shape or the appliaces location. Since it is no longer necessary to loop the cable back to the thermostat, customizing your heated floor layout is easier than ever.

Schluter Ditra Heat cables are twisted pair heating cables that are compatible with the DITRA-HEAT uncoupling membrane (Sold Separately) that makes cable layout as easy as clicking the heating cable in, and provides additional benefits such as uncoupling, vapor management, and tile crack prevention.

Technical Specifications

• 120 Volts
• 3.4 Amps
• 405 Watt power output.
• 32 Square Feet Coverage
• 105.8 Linear Feet Cable Length

• TECHNICAL SPECIFICATIONS – 120 Volts, 3.4 Amps, 405 Watt power output. The cable provides 32 Square Feet of Coverage, Total Cable Length is 105.8 Linear Feet. Specially designed for integration with the Ditra-Heat uncoupling membrane in interior floor warming applications.
• EFFICIENCY - High power output of 15 watts, with high level of conductivity resulting in minimal amount of energy loss.
• INSTALLATION - The cables can be installed without returning to the thermostat and produce virtually zero electromagnetic fields. The heat cable may be spaced at continuously 3 stud intervals or alternating 3 stud – 2 stud – 3 stud internals in isolated areas or over the entire floor.
• SAFETY – Contains Suntouch Loudmouth electrical fault indicator, which sounds an alarm if the heating wire is cut or damaged during installation. This allows for immediate identification of a problem before the heating cable is tiled over.
• WARRANTY – Ditra Heat Cable is covered by the 15-year Schluter Systems manufacturers warranty when installed in accordance to the installation handbook.

User questions & answers

Question:	I need the 16 foot cable. why can"t it be sent to my address? I already have cable but it is wrong size
Answer:	48 inches wide.
Question:	Are there 2 temperatute sensors included
Answer:	I think so but not sure

• HEATIT warm mat was used underneath of many popular flooring material such as ceramic tiles, natural stones, wood, and so on. One piece 60 sq. ft. mat consists of a heating cable secured with double-sided tape onto a fiber-glass mesh.
• UL LISTED for USA and Canada. Fluoropolymer (One of the most heavy duty plastic material) as the insulation. Can be used for wet application, but not for installation in pool and spa areas, nor outdoor use. 30 years limited warranty for the heating mesh. The limited warranty is valid based on correct installation methods and completion of all test requirements.
• Mat size: 20" width, 36.6’length; Voltage: 120V, Amps: 6.0A, Watts: 720W. Output: 12 Watts/Sqft. The yellow heating element cannot be cut. The mesh material can be cut to make turns and angles to heat just about any shaped area. A more detailed installation process is outlined in the instructions.
• Ultra-thin & durable heating element (Only 1/8" thick), Pre- spaced wire attached to a tough fiberglass mesh backing, Cable cannot be cut, but the matting can be, to allow you to turn a corner or reverse direction.
• Fully self-adhesive underlay for ease of laying along with complete and comprehensive installation instructions for your convenience. used in conjunction with the thermostat controller. Easy install to your shower room, kitchen room, wet room, living room, greenhouse and so on. Recommended cooperate with HEATIT GFCI Thermostat to work.

User questions & answers

Question:	Does this product support under carpet (above padding) application
Answer:	Yes, you can use carpet above the floor.
Question:	Would this work to keep a water storage tank possibly from freezing, if wrapped? I know its a little off question, but thanks in advance
Answer:	We recommend you choose HEATIT JHSF or JHSF1.
Question:	Can i put this under an area rug
Answer:	It can not put under the rug directly. First, install insulation material, then pave heating mats, after that pave concrete, and install flooring. And above the flooring, you can put a rug.
Question:	Can I shorten the black, white, and ground wires of the supply line. (Not the heating cable
Answer:	Yes, you can cut the cold lead.

Product features

HEATIT WARMMAT Electric Radiant Floor Heating Mat

Ideal for renovations, the heating mats provide warmth throughout the whole room, giving a whole new meaning to heating and comfort.

Floor Heating Mat

Programmable Thermostat with sensor(Not included, Sold individually)

Installation Monitor (Not included, Sold individually)

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the red mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the red mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the red mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the red mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

• 50 Sqft Cable with Digital Programmable Thermostat, Electric Floor Heat Warming System
• Includes Plastic Cable Guides and Installation Monitor
• 120V, 5.0 Amps, 600W, 12 Watts/Sqft, UL Listed for USA and Canada
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 year Warranty

User questions & answers

Question:	How many linear feet does this include
Answer:	A 40 sq. ft. cable system is 160 linear feet of wire.
Question:	Is the thermostat's light always on? Trying to decide if we will put the box in our bedroom but don't want any light coming out of it at night
Answer:	No the light only turn on when you push buttons on the thermostat
Question:	What is the wattage (or amps) specification for 200' (50 sq ft) of heating wire
Answer:	A 50 sq. ft. 120V cable system is 5.0 Amps and 600 Watts.
Question:	Can this be installed under the subfloor between joists? I do not want to rip up my existing tile and have basement access
Answer:	No, our floor heating systems are to be installed on top of the subfloor and must be embedded in a polymer modified cement based mortar.

Product features

Floor Heating Cable

The Electric Floor Heating Cable consists of a spool of heating cable.  Simply run the cable 3" apart across the area to heat using the cable guides to secure to the floor running the cold lead up the wall to the electrical box.  These heating systems are ideal for odd shaped areas or to heat around objects.  The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat and floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volt, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system.  Connect the system leads to the monitor prior to installation.  The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar.  If the alarm sounds, stop work and consult the operation manual.  We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

CABLE GUIDES

Designed for fast installation of the the heating cable, simply loop the floor heating cable around the guide as you lay the cable system across the subfloor.

Secure the cable guides according to the planned layout using screws, nails, adhesive or glue approved for use with the given subfloor.  The heating element should be spaced 3" apart across the area to be heated.  Cable guides should be run perpendicular to heating cables.  The heating cables should have a minimum distance of 2" from walls and objects. Spacing between cable guides should not exceed 36" in distance.  Secure the heating element to cable guides by wrapping the wire around the stud.  Maintain moderate tension of cable throughout installation.  Do not twist heating element and keep the minimum bending radius of the cable to 1".

Cable guides are 12" long and can be cut to length. Includes enough cable guides for cable heating system.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.