4 best electric floor heats

• 35 Square Feet Heating Mat, 20 Inches Wide x 21 Feet Long, Includes Required GFCI 7 Day Programmable Thermostat - 120VAC
• Highest Quality USA Heating Cable Designed for Longevity by an over 20 Year USA Manufacturer
• Listed and Safe for Wet Locations. Thin profile ~1/8" thick. Multiple Configurations, Adheres to the Floor.
• ETL Listed for US & Canada - Limited Lifetime Warranty by an over 20 Year Trusted USA Manufacturer
• Voltage: 120V - Amps: 3.5 - Watts: 420 - 15 ft Cold Lead - 12 Watts/Sqft

User questions & answers

Question:	does this increase the room temperature
Answer:	Hello, the end of headband is cover with soft cloth. It don't make you feel pain even wear it all day. Don't worrt about this.
Question:	Can you install this in concrete in an outside location
Answer:	No, it is comfortable to wear and not slip off.
Question:	Do you have installation instructions or some video posted somewhere how its set into mortar prior to tile and so on? would be very helpful. Thank you
Answer:	Yes it can. It is movable and you can adjust it to the centre or the side.
Question:	Can you cut the end if you have too much and terminate it
Answer:	Yes, a 5T is for a 5 year old.
Question:	hi, can you set a timer for it to come on early..like an hour before you usually wake up so that its nice and toasty
Answer:	I would size up to allow for shrinking when washed.
Question:	I want to install this under a granite island counter top do you think this is possible
Answer:	I bought it for my 3 month old niece and my toddler she’s four and they looked sooo adorable.
Question:	Can this product be installed directly on concrete
Answer:	a month
Question:	Can the mat be cut to fit the space
Answer:	Yes, it's tight on an adult!

Product features

Programmable Thermostat

Heatwave standard thermostat (M429) specifications:

• Up to 4 event programming
• Simple user interface
• Pre-programmed for quick set up
• Multi voltage: 120/208/240 V
• Output Relay 15A
• Can be set to automatic, manual, or comfort mode
• Includes 2 sensors: a built-in air sensor and floor sensor thermistor with 10 feet of NTC (12K) sensor cable
• Temperature control range: 41ºF to 104ºF
• Class A GFCI (5 mA trip level)

An Efficient System

The Heatwave system comes with a 10-foot long floor sensor standard for optimal use of your Heatwave System. Extra compatible sensors are available on our store page.

Fully Embedded System

Heatwave can be embedded in various types of cement-like material, allowing for several floor covering options. Embedding Heatwave allows for optimal heat dispersion and gives the end-user a nice, consistently warmed floor.

Be sure to get the right size!

Heatwave comes in various sizes to accommodate differing size spaces. It is important to accurately measure the space you intend heat. Avoid placing the heating cable under vanities, within 6-inches of the toilet gasket and under other permanent fixtures in the space. It is acceptable to place Heatwave in a shower, provided that is still fully embedded in a thinset/or Mortar.

Be aware the heating cable cannot be cut or shortened in anyway.

Get the Right Size

Be sure to order a Heatwave system for the area to BE HEATED, not the total area. The Heatwave heating element CANNOT be cut or shortened to a fit a space.

Smaller size systems are available to fit smaller areas.

Avoid performing any cutting/drilling tasks on a finished/partially finished floor that could cause damage to heating element.

Don't Power on Until...

Do not power on the Heatwave System until it has been completely embedded in a cement-based compound (thinset/mortar/self-leveling) and that compound is completely dried.

Do not power on a Heatwave System to "test" or to dry out an embedding compound.

Completely Embed

The Heatwave cable MUST be completely embedded (unable to be seen) in a cement-based compound (thinset/mortar/self-leveling).

Both connection/junction points must also be fully embedded, the connection point at the end of the heating element and the connection point between the red heating cable and the black unheated (cold lead) cable.

Ensure that air pockets in mortar/thinset/self-leveling compound with exposed heating element, get fully filled-in.

Perform All Tests

Perform all required tests outlined in the installation manual at several stages throughout installation to ensure that heating element has not been damaged.

Failure to perform all the required tests at several stages can cause system damage to be missed which can lead to system errors, ground faults, non-functional systems, and unrepairable damage.

• 15 Square Foot Under Tile Heating Mat, Mat is 20” Wide x 9’ Long, 120 Volts
• Mat has double sided tape (Adhesive Backing) to stick to floor. Lays FLAT for easy installation.
• 120V, 1.5 Amp, 180W, 12 Watts/Sqft, UL Listed for USA and Canada, Cable is 1/8” thick
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 Year Warranty

User questions & answers

Question:	I need 24" x 60".. Can I route the last one feet wire along the side to increase the width to 24" and keep the length to
Answer:	the 100x150mm that are Square/Rectangular Size: 4x6in. are too long for this case
Question:	I am planning to install wooden floor (hardwood or laminate) in my bathroom. Can I use this system to heat wooden floors or is is for tiles only
Answer:	I can just squeeze three Tiffen 77mm sized cases in this pouch but the front flap will barely close. Bower filter cases are even larger and are a real stretch to make fit.
Question:	I have a concrete slab that I would like to add electric floor heating and tile over it. How do I avoid moisture build up with this product
Answer:	Yes, it can, but you may find it too large for the 40.5 size and therefore not as convenient to use? I use it for 77mm filters and they fit very inside perfectly. It is very well made and I really like it.
Question:	Can this be used when installing a drop-in tub to keep bath water warm
Answer:	The belt loop is a sewn on nylon belt that closes with Velcro. The Velcro "pinches" the belt strap on both top and bottom -- it Velcro's to the body of the pack then a flap comes over and secures the closure from the other side. It is locked so well it is kind of difficult to get off. I am pretty satisfied with its security, BUT, I never use it on my belt. I keep it in my camera bag.

Product features

Floor Heating Mat

The Electric Floor Heating Mat consists of a mat with the cable heating elements pre-spaced 3" within the mat. Simply unroll the floor heating mat with the cold lead running up the wall to the electrical box. These heating systems are ideal for rectangular or square areas with right angles. You can manipulate the mat to fit the desired heating area by using the turning techniques shown below. The white fiberglass mesh may be cut to flip and turn the mat. The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat with floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volts, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• A mode controls the ambient air temperature
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system. Connect the system leads to the monitor prior to installation. The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar. If the alarm sounds, stop work and consult the operation manual. We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

ADHESIVE BACKED MAT

This heating mat has double sided tape to offer an adhesive backing that make installation a breeze. Simply fit the mat to your floor, then peal of the tape and adhere to the floor. This greatly reduces the installation time and gets you on your way to enjoying your heated floors.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

• 30 Sqft Cable with Digital Programmable Thermostat, Electric Floor Heat Warming System
• Includes Plastic Cable Guides and Installation Monitor
• 120V, 3.0 Amps, 360W, 12 Watts/Sqft, UL Listed for USA and Canada
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 year Warranty

User questions & answers

Question:	How many linear feet does this include
Answer:	A 40 sq. ft. cable system is 160 linear feet of wire.
Question:	Is the thermostat's light always on? Trying to decide if we will put the box in our bedroom but don't want any light coming out of it at night
Answer:	No the light only turn on when you push buttons on the thermostat
Question:	What is the wattage (or amps) specification for 200' (50 sq ft) of heating wire
Answer:	A 50 sq. ft. 120V cable system is 5.0 Amps and 600 Watts.
Question:	Can this be installed under the subfloor between joists? I do not want to rip up my existing tile and have basement access
Answer:	No, our floor heating systems are to be installed on top of the subfloor and must be embedded in a polymer modified cement based mortar.

Product features

Floor Heating Cable

The Electric Floor Heating Cable consists of a spool of heating cable.  Simply run the cable 3" apart across the area to heat using the cable guides to secure to the floor running the cold lead up the wall to the electrical box.  These heating systems are ideal for odd shaped areas or to heat around objects.  The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat and floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volt, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system.  Connect the system leads to the monitor prior to installation.  The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar.  If the alarm sounds, stop work and consult the operation manual.  We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

CABLE GUIDES

Designed for fast installation of the the heating cable, simply loop the floor heating cable around the guide as you lay the cable system across the subfloor.

Secure the cable guides according to the planned layout using screws, nails, adhesive or glue approved for use with the given subfloor.  The heating element should be spaced 3" apart across the area to be heated.  Cable guides should be run perpendicular to heating cables.  The heating cables should have a minimum distance of 2" from walls and objects. Spacing between cable guides should not exceed 36" in distance.  Secure the heating element to cable guides by wrapping the wire around the stud.  Maintain moderate tension of cable throughout installation.  Do not twist heating element and keep the minimum bending radius of the cable to 1".

Cable guides are 12" long and can be cut to length. Includes enough cable guides for cable heating system.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated

LuxHeat's wide range of 120v and 240v Heating Mats offer the ultimate in design flexibility - Mats can be cut, turned,

flipped, and when necessary, wires can be removed from the mesh to accommodate any room shape or size

The LuxHeat mat is controlled by OJ Microline's Sleek, Modern, Non Programmable, easy-to-use thermostat

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

HEATING MAT FEATURES:

✔ 10 Year manufacturer’s warranty

✔ Double insulated, single cold lead

✔ UL listed for USA - Classified as safe for Wet Locations

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire

✔ Heater wire is less than1/8” thick, ensures minimal effect on finished floor height

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ 120 Volt

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ Modern, Sleek design to compliment any room in your home

✔ Keeping it simple with OJ's Non-Programmable thermostat, no programming complications

CABLE MONITOR: Includes AAA batteries

BENEFITS:

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat Heated Floor Mat is best suited for installation under Tile, Stone, Laminate and Engineered Wood flooring. Heater Kit Includes - Self-Adhesive Heating Mat, OJ Microline UTN4-4999 Non-Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection), plus Cable Monitor/Alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing coverage where neded. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. The single point power connection makes for easy wiring, and the less than 1/8" heating cable ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - With a combined experience of over 50 years, the LuxHeat Tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty - providing Peace of Mind and an assurance of performance for many years to come. LuxHeat's radiant floor heat Cables and mats are UL approved and Safe for Wet Locations.
• NON-PROGRAMMABLE THERMOSTAT - The OJ Microline UTN4 promotes sleek modern design and intuitive control, making it easy to install and easy to use, ideal for those who like to keep it simple. The 120 Volt, 15 amp, thermostat includes an integrated Class A GFCI (ground fault protection) and offers Dual (air & floor) sensing capabilities. OJ Microline thermostats are cULus approved for USA and Canada, supported by a 3-year Factory Warranty. Box includes 10Kohm Floor Sensor.
• TECHNICAL DETAILS for Heated Mat - Size: 50 Sqft (20" x 30.50'), 12w/Sqft @ 3" wire spacing's (120v) 600w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	This system is suitable for outdoor as well? Eg: hrated driveway
Answer:	Yes, it comes with a programmable thermostat and you can set different times for different days of week, and you can program twice a day - so maybe a 3 hour chunk in the morning and other chunk at night.
Question:	How hot does the temperature get and does it stay the same temperature all the time
Answer:	Certainly possible, I am just not sure how well it will work thru that thickness of that stone. I have heard from others that their floor heater gets too hot to use. Mine is set to 76 and it is not hot, just very comfortable to walk on during the cold ohio weather. I have not cranked it up to the high setting which I think is 82. I would think if your granite supplier is familiar with this and say it works, I would have no hesitation that this unit could not do the job.
Question:	Does it need cement? can i just place it under the vinyl plank flooring
Answer:	I installed mine directly to the concrete slab and poured a self leveling compound over the top. It works just fine. I think the larger concrete slab acts as a giant heat sink and maybe doesn’t get as warm as it might otherwise and/or takes a little longer to heat up. That said, it works great and gets plenty warm where we actually laid it... in front of the sinks and in front of the shower. If you step off that area you can tell an immediate difference and I wish we’d put down a little more than we did.
Question:	How hot does this get and can use it under a counter in the kitchen
Answer:	Sure, cut mesh and reposition the heating wire the way you need. http://www.heattechproducts.com/how-to-install-radiant-floor-heating-mats
Question:	hi, can you set a timer for it to come on early..like an hour before you usually wake up so that its nice and toasty
Answer:	No it is not. But has a long cord.
Question:	I want to install this under a granite island counter top do you think this is possible
Answer:	No battery needed - it is USB power with built in recharging battery
Question:	Can this product be installed directly on concrete
Answer:	Not exactly sure about the Xbox 1, but we did not need an adapter for our Xbox 1s.
Question:	Can the mat be cut to fit the space
Answer:	It's finicky with our Switch. Doesn't work at all with our PS4.