12 best cadet baseboard heaters
Cadet baseboard heaters are a type of electric heating device commonly used for space heating in residential and commercial buildings.These heaters are designed to be installed along the baseboards of walls, providing even and efficient heating. Here's what you need to know about Cadet baseboard heaters:
Heating Technology: Cadet baseboard heaters use electric resistance heating technology. They consist of a heating element (usually made of metal) that heats up when electricity flows through it. As the element heats up, it radiates heat into the room.
Installation: Cadet baseboard heaters are typically installed near the floor along the baseboard of a wall. They are hardwired into the building's electrical system and controlled by a thermostat. Installation may require some electrical expertise or the assistance of a professional electrician.
Sizes and Models: Cadet offers a range of baseboard heater models with different lengths and heating capacities to suit various room sizes and heating requirements. Common lengths include 24 inches, 36 inches, 48 inches, and 72 inches.
Thermostat Compatibility: Cadet baseboard heaters can be used with various types of thermostats, including line-voltage thermostats designed for electric heating. Some models even come with built-in thermostats for easy temperature control.
Safety Features: These heaters often include safety features such as thermal overload protection, which automatically shuts off the unit if it overheats. This helps prevent fires and electrical hazards.
Quiet Operation: Cadet baseboard heaters are known for their quiet operation. They do not have fans or moving parts, reducing noise levels while heating.
Efficiency: Electric baseboard heaters are generally considered efficient because they provide zonal heating, allowing you to heat specific rooms or areas as needed. However, their efficiency depends on factors like insulation and thermostat settings.
Design: Cadet baseboard heaters are designed to blend with room decor. They often have slim profiles and neutral colors to minimize their visual impact.
Maintenance: These heaters require minimal maintenance. Regular cleaning to remove dust and debris from the heating element and the surrounding area is usually sufficient.
Cost: The cost of Cadet baseboard heaters can vary depending on the model and size. While the initial purchase and installation costs are relatively low, they can lead to higher electricity bills if used extensively, especially in colder climates.
Warranty: Cadet typically offers warranties on their baseboard heaters, providing coverage for a specified period against defects in materials and workmanship.
In summary, Cadet baseboard heaters are electric heating devices designed for space heating in residential and commercial buildings. They are known for their ease of installation, quiet operation, and compatibility with various thermostats. When choosing a Cadet baseboard heater, it's essential to consider the size of the room, insulation, and your heating needs to select the appropriate model.
Below you can find our editor's choice of the best cadet baseboard heaters on the market
Cadet Manufacturing 09954 240-Volt White Baseboard Hardwire Electric Zone Heater, 1000-Watt, 48-Inch
Cadet
Product description
Cadet Manufacturing 09954 White Baseboard Hardwire Electric Zone Heater 240V, 1000W, 48" requires a thermostat. 25 gauge steel. 20 gauge junction box with ground, all metal and powder coated. UL listed.
User questions & answers
| Question: | Can i wire 2 or 3 of them together an what size breaker |
| Answer: | When the A is ON the thermostat is controlling heat. Use + or - to set desired temp. When the A is OFF, the heater is simply on and heating away. If it's in a small room (10x10 say) it can easily heat that space to 90 degrees. So use the thermostat. |
| Question: | Does this require a single pole or double pole t-stat |
| Answer: | It's completely dark. No glowing. The only light emitted is from a digital display. |
| Question: | Anyone aware of the energy efficiency of this heater |
| Answer: | the 5622 is white, the 5620 is grey and the 5624 is black. I can't seem to find any other differences. You can check it out for yourself here: http://www.laskoproducts.com/low-profile-heaters/ |
| Question: | getting this for a 4 season porch. I need a separate thermostat. Will this work with the Nest thermostat |
| Answer: | It's not going right to 77.... it's saying that the temperature in the room is 77. The digital display will always read the current temperature in the room, so if you're setting it to keep the room at 73, then it won't come on if it's already 77. If you're not warm enough, then you'll have to set it higher than what the thermometer on the heater is reading. |
Cadet 8734 White Double Pole Built In Baseboard Thermostat
Cadet
Product description
The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate, so you can install it easily on either end of the baseboard heater and avoid additional wiring.
- RANGE: This thermostat has a temperature range: 45º - 80ºF (7ºC to 27ºC) with an easy to use large, adjusting twist dial
- COMPATIBLE: This thermostat has been made for Cadet F series electric baseboard heaters only (sold separately)
- EASY TO INSTALL: Our thermostat conveniently mounts to either end of the Cadet baseboard heater, eliminating the need for extra wiring
- DESIGN: The white color of the thermostat is designed to match your baseboard heater and easily blend in and with its unique and compact design
- USE: Made with a single pole (2-wire) low setting and when turned fully counterclockwise, this thermostat is in low position
User questions & answers
| Question: | Hi, i already order this one "cadet 8734 white double pole " , would any one who knows confirms it is a 120v |
| Answer: | Yes, I am using it on 120v |
| Question: | Does the tstat fit in a regular single recepticle box |
| Answer: | I removed it from its mounting so I never tried to install into a box. So I am unsure but I think it would or could fit. |
| Question: | If I attach this to the baseboard heater ,does the closeness to the heater affect the functioning of the thermostat |
| Answer: | Great question and I really don't know the answer. We have several baseboard heaters with attached thermostats. Heat rises and the control is on the side so my guess is there would not be any issues. |
| Question: | I need replacement nobs for Fahrenheat baseboard heater |
| Answer: | Contact Cadet company. |
Product features
About Cadet
Cadet enhances the moments that matter with everything you need to create a home that is welcoming and friendly. Our products are designed for your home with a value that you appreciate. Cadet invites warmth, design & comfort into the life of every home and provides you with the feeling that you have everything you need. Cadet products combine value you can appreciate with safe, reliable products you can trust. Warm your space with Cadet.
Cadet Manufacturing White 05532 120-Volt Baseboard Hardwire Electric Zone Heater, 750-Watt, 6.25-Amp, 36-Inch
Cadet
Product description
Cadet Manufacturing 05532 White Baseboard Hardwire Electric Zone Heater 120V, 750W, 6.25A, 36" requires a thermostat. 25 gauge steel, 20 gauge junction box with ground, all metal, powder coated. UL listed.
- Requires A Thermostat
- 25 Gauge Steel
- 20 Gauge Junction Box With Ground, All Metal, And Powder Coated
- UL Listed Heater
- Requires A Thermostat
- 25 Gauge Steel
- 20 Gauge Junction Box With Ground, All Metal and Powder Coated
- UL Listed Heater
User questions & answers
| Question: | I returned you product to a local Kohls and i received an email today that the product was never received. Can you give me some info on this please |
| Answer: | This is a link from Home Depot I used when I purchased mine. https://www.homedepot.com/catalog/pdfImages/0c/0c48b303-97be-48ec-82b6-ff341b740842.pdf excellent heater. I love it |
| Question: | What size room with minimal insulation will this heat |
| Answer: | You may use an extension cord that is designed to handle 15 amps. This cord can pull up to 12 amps. A good appliance style, one outlet 3 prong 12 gauge cord will handle this. Do not plug anything else into this cord. Always use the shortest length extension cord possible. IE Don't use a 25' extension cord for this 8 foot run. A six foot 12 g. 3 prong would be all that is needed. |
| Question: | do all the cadet thermostat come with a wiring diagram |
| Answer: | my experience is a 300 to 500 sq ft. but it also depends on how high the ceilings are. This is great heater, but dont expect it to be quick heating. Takes about 15 minutes for the room to heat up. |
| Question: | Does this unit have any sort of control? thermostat? on-off switch? high-low control |
| Answer: | there is a control, you can set so that it keeps the area heated but it 1000w all the time turn it down it comes on less. |
Product features
36" Electric Baseboard, White
- Practical design is ideal for new construction and built to last
- Easy installation with pre-punched knockouts at 1-inch intervals
- Universal wiring available at either end
- Proven construction helps maximize surface area and funnel heated air
- Place under a window for best results
- Rest easy—includes high-temperature safety shutoff feature
- Durable, powder-coated finish stands up to nicks and scratches
- Proudly made in the USA
Cadet 24" 208/240 Volt 896/1,194 BTU White Baseboard Heater
Cadet
User questions & answers
| Question: | Can you control the temperature |
| Answer: | It has a thermostadt that can be digitaly set to the desired temp. Now whether it can be set as low as 45 degrees I am not sure but you surely can set if for 50 degrees and it will function very well. I have a 400 square foot den and on the coldest days, and I am talking 20 degrees below, it will run you out of the room when set on 70 degrees. I had to set it at about 65 degrees to tolerate the heat. This heater really performs well. To answer your question will it turn off once the temp is reached...the answer is YES it will and turn on when it drops below the desired temp too. |
CADET MANUFACTURING 06511 240-Volt Base Electric Heater, 6-Feet
Cadet
Product description
This 240V, 1500W, 6' almond baseboard hardwire electric zone heater will heat your home or office efficiently and effectively. It is UL listed with a 24 gauge steel.
- All metal, powder-coated
- 20 gauge junction box with ground
- Thermostat required
User questions & answers
| Question: | Is this heater oil filled |
| Answer: | No it is not. |
| Question: | Thermostat to go with this heater |
| Answer: | I replaced the thermostat and this wall board heater at the same time. I just found a similar model of thermostat (Honeywell T498B 1512 super tradeline volt electric heat thermostat double line break in off position). Just make sure your thermostat is compatible with the voltage of the heater (this one is 240 volts). It took a little understanding of hooking up the thermostat but it does work nicely. You certainly can get a thermostat with more features but make sure the voltage and wiring from the old thermostat will work on the new thermostat. I am not an electrician and I am sure electricians could offer more information. |
Cadet 8F2025W Electric Baseboard Heater
Cadet
Product description
2000/2500W 240V, 8 foot electric baseboard heater, white, multi-watt
- Not a plug-in model, heater safely hard-wires. Multi-watt unit, choose between 2500 or 2000 watts when installed at 240 volts. Choose between 1875 or 1500 watts when installed at 208 Volts
- Convection heating helps circulate air to heat a space up to 350 square feet
- Quiet operation ideal for bedroom use
- Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
- Safety feature turns heater off if normal operating temperatures are exceeded
Cadet EBHN1250W hydronic electric baseboard, 1250W, 240V, Left-end wire, white by Cadet
PER - Cadet
Product description
Part Number: 027418131607
Part: Cadet EBHN1250W 71" 1250/937W 240/208V SoftHEAT Hydronic Baseboard
71" SoftHEAT Hydronic Baseboard, 240V/1250W, 208V/937W, Color: White - Thermostat Required (Sold Separately). *Cadet Part # 13160*
Volts AC: 240, 208
Color: White
Length: 71 in
Type: Heater, Baseboard, Hydronic
Standards: California Proposition 65
Also known as: 027418131607, 13160, CDTEBHN1250WLH, Cadet, EBHN1250W, Baseboard Heater - Hydronic, Heaters - Baseboard, Heaters & Thermostats, Heat, Fans
Equivalent to:
Cadet BTF2W Double Pole Baseboard Heater Thermostat
Cadet
Product description
BTF double pole thermostat, mounts on Cadet electric baseboard heater, white
- Easy to use with large adjusting twist dial
- Eliminates the need for extra wiring
- Conveniently mounts to either end of Cadet baseboard heater
- Use with 120, 208, or 240 volt Cadet standard baseboard heaters
- White color to match your baseboard heater
Cadet 3F750-1A Electric Baseboard Almond
Cadet
Product description
Bring warmth and comfort into any bedroom or office with the popular Cadet 3F750-1A 3' 750W 120V Almond Baseboard Heater. Ideally placed under a window, this unit is designed to mix the warm air from its convection heating with the cool air from the window to create a pleasing natural atmosphere. The durable powder-coated almond finish will blend beautifully with your walls and furniture.
Cadet EBHN1000W Baseboard Heater, 59" 1000W 240/208V SoftHEAT Hydronic w/Left Hand Wire - White
Cadet
Product description
The Cadet EBHN1000W is for a 59" hydronic baseboard heater from the SoftHEAT collection. It is designed for use with 240V or 208V applications with a maximum wattage of 1000W. This model of Cadet heater comes with a white finish and a left hand wire setup.This Cadet baseboard heater uses hydronic technology, which doesn't require a plumbing connection, to effectively warm the space. It's environmentally friendly and safe for pets and animals, as the Cadet SoftHEAT line offers some of the lowest surface temperatures on the market. These heaters are crafted of a reliable 22gauge steel.These Cadet SoftHEAT heaters can be mounted to the wall or placed directly on the floor. They're most effective when installed under a window and at least a foot away from objects in the room. They should be placed a foot away from objects above and not installed underneath electrical outlets for safety purposes. A SoftHEAT thermostat is required for these Cadet baseboard heaters.
- Keep allergies at bay - smart design helps reduce the effect of indoor allergens Lowest surface temperatures available make SoftHEAT perfect for homes with kids and pets Hydronic heat uses environmentally friendly fluid Sleep soundly, thanks to near-silent operation Install easily, with no plumbing required Save on energy bills - SoftHEAT spreads residual heat even after thermostat turns off Rest easy includes high-temperature safety shutoff feature Powder coated for a smooth, durable finish Pro
30" Electric Baseboard Heater, White, 375/500W, 208/240V
Cadet
Product description
'Electric Baseboard Heater, Conventional, Residential, Voltage 240/208, 1 Phase, BtuH Output 1706/1279, Mounting Type Wall, Length 30 In., Depth 2-1/4 In., Height 6-3/4 In., 60 Hz, 500/375 Watts, 2.08/1.8 Amps AC, Color White, Finish Powder Coat, Housing Material Steel, Standards UL'
Cadet Manufacturing White 05534 120-Volt Baseboard Hardwire Electric Zone Heater, 1000-Watt, 8.33-Amp, 48-Inch, 1000 W
Cadet
- Requires A Thermostat
- 25 Gauge Steel
- 20 Gauge Junction Box With Ground, All Metal, And Powder Coated
- UL Listed Heater
- BTUS:3415
- Requires A Thermostat
- 25 Gauge Steel
User questions & answers
| Question: | Will this heat a whole basement |
| Answer: | Ours is installed in a 8 x 15 bathroom and it keeps it warm enough in the comfort zone setting. I guess it depends on the sq ft of the basement. It might keep it above freezing at the highest setting, but you might be looking at paying a substantial electric bill as a result. Cadet makes larger units, but I don't know if it would be sufficient. |
| Question: | How do you install this? do you just plug it in or is there some wiring involved |
| Answer: | There is wiring involved, running power to it and to a line voltage thermostat. It is meant to be hard-wired, not just plugged-in. |
| Question: | is this heater child safe |
| Answer: | Yes. |
| Question: | what is the different about double pole and single pole on Cadet thermostate |
| Answer: | i think you have to use double pole for 240v heaters, but both will work will 120v heaters. i bought single pole for this 120v heater and it works fine. |
Product features
Wiring Options
Universal wiring available at either end
About Cadet
Cadet enhances the moments that matter with everything you need to create a home that is welcoming and friendly. Our products are designed for your home with a value that you appreciate. Cadet invites warmth, design & comfort into the life of every home and provides you with the feeling that you have everything you need. Cadet products combine value you can appreciate with safe, reliable products you can trust. Warm your space with Cadet.
Latest Reviews
View all
Dart V Wing Flights
- Updated: 07.05.2023
- Read reviews
Bb Trumpets
- Updated: 21.07.2023
- Read reviews
Garden Kneeler Benches
- Updated: 04.04.2023
- Read reviews
Dog Nail Grinders
- Updated: 14.01.2023
- Read reviews
Key Flutes
- Updated: 25.03.2023
- Read reviews