9 best brasscraft gas furnaces
BrassCraft gas furnaces are not widely recognized in the HVAC industry. It's possible that BrassCraft primarily focuses on other plumbing and gas-related products rather than manufacturing gas furnaces. Typically, gas furnaces are produced by specialized HVAC companies that have expertise in heating and cooling systems.BrassCraft may provide components or accessories related to gas furnaces, such as gas connectors, valves, or fittings, but they are not known for manufacturing complete gas furnace systems.
If you are looking for information on gas furnaces or related HVAC products, it is advisable to consult reputable HVAC manufacturers and suppliers who specialize in these products to ensure you get accurate and reliable information.
Below you can find our editor's choice of the best brasscraft gas furnaces on the market
BrassCraft PSC1083 K5 Safety Plus Gas Installation Kit for Range Furnace and Boiler
BrassCraft Mfg
Product description
BrassCraft's Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. The BrassCraft Pro-Grade Range, Furnace & Boiler Installation Kit contains everything you need to connect most five & six burner gas ranges, furnaces and boilers to your gas supply. Includes easy-to-read installation instructions, 3mil tube of pipe thread sealant and 3mil tube of leak detection solution (fluorescent green)..
From the Manufacturer
BrassCraft's Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. The BrassCraft Pro-Grade Range, Furnace & Boiler Installation Kit contains everything you need to connect most five & six burner gas ranges, furnaces and boilers to your gas supply. Includes easy-to-read installation instructions, 3mil tube of pipe thread sealant and 3mil tube of leak detection solution (fluorescent green)..
- 5/8 In. OD x 48 in. length corrugated stainless-steel gas connector with ProCoat coating to withstand prolonged exposure to harsh household chemicals
- Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. MIP (with 1/2In. FIP tap) connection to gas supply or gas ball valve
- Includes multiple steel fittings to fit most gas appliance inlets: 1/2In. MIP (with 3/8In. FIP Tap) fitting & 3/4In. MIP (with 1/2In. FIP Tap) fitting
- Fits all current and most older five to six burner ranges, furnaces and boilers
- Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi certified
User questions & answers
| Question: | What are the dimensions of this item |
| Answer: | They say made in China. But they are shipped from Amazon. I don't believe they are shipped from China to your house, if that's what your asking. |
BrassCraft PSC1107 K5 Safety PLUS Gas Installation Kit for Range, Furnace & Boiler
BrassCraft
Product description
The product is easy to use. The product is highly durable and handle. The product is manufactured in china.
- The product is easy to use
- The product is highly durable and handle
- The product is manufactured in China
- Country of Origin: United States
User questions & answers
| Question: | Is the safety connection a 3/4 male and the connection to the appliance a 1/2 or |
| Answer: | 12” x 6” |
| Question: | Does this produc work in a Restaurant, to conect a fryer |
| Answer: | No, the paper does not. The plastic is indeed 8 1/2" at the top, but then it narrows as it goes to the bottom. So when I put a piece of 8 1/2" x 11 paper in it, it did not lay flat. |
| Question: | Is the hose actually 3/4 inch |
| Answer: | No they do not leak and they are great for freezing food. |
Brasscraft CSSC14-48 Range and Gas Furnace Flex-Line, 24.5x3.5x1, yellow
BrassCraft
Product description
Connect your gas range, furnace, or boiler with this Gas Range and Gas Furnace Flex-Line (5/8 in. OD (3/4 in. MIP x 1/2 in. MIP) x 48 in.) from BrassCraft. The connector features a corrosion-resistant coating to protect from harsh cleaning and plumbing repair products and can be used for indoor or outdoor use. The connector supports appliances up to 106,000 BTU.
From the Manufacturer
Brasscraft CSSC14-48 Gas Range and Gas Furnace Flex-Lines .
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Furnaces and Boilers Up To 106,000 Btu
- 100-Percent Leak Tested
- Approved For Lp (propane) and Natural Gas
Brasscraft CSSC44-48 Range and Gas Furnace Flex-Lines
BrassCraft
Product description
Connect your gas range, furnace, or boiler with this Gas Range and Gas Furnace Flex-Line (5/8 in. OD (1/2 in. MIP x 1/2 in. MIP) x 48 in.) from BrassCraft. The connector features a corrosion-resistant coating to protect from harsh cleaning and plumbing repair products and can be used indoors or outdoors. The connector supports appliances up to 106,000 BTU.
From the Manufacturer
Brasscraft CSSC44-48 Gas Range and Gas Furnace Flex-Lines.
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning And Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Furnaces And Boilers Up To 106,000 Btu
- 100-Percent Leak Tested
User questions & answers
| Question: | what is the length of this product |
| Answer: | The craftmanship of this product is excellent, Also stackable, They fit perfect inside my freezer, It's not lids, Because it had to opening at the ends, I had a vacuum sealer machine for bags and it's the perfect combination (No more freeze burn on the meats), No more hard times to find what I need. I will rate this product 6 Stars. |
BRASSCRAFT CSSB21-24 Gas Range & Gas Furnace Flex-Line (7/8" OD x 24", 3/4" FIP x 3/4" MIP, Up to 290,900 BTU) PET2
Product description
BRASSCRAFT CSSB21-24 Gas Range & Gas Furnace Flex-Line (7/8" OD x 24", 3/4" FIP x 3/4" MIP, Up to 290,900 BTU) Corrosion-resistant coating protects from exposure to harsh cleaning & plumbing repair products; Stainless steel construction; Ranges, furnaces & boilers; 100% leak tested; Approved for LP (propane) & natural gas; Approved for indoor & outdoor use; Designed, machined & assembled in USA; ANSI z21.24/CSA 6.10 & ANSI z21.75/CSA 6.27; 7/8" OD x 24" (3/4" FIP x 3/4" MIP); Up to 290,900 BTU;
BRASSCRAFT CSSB21-24 Gas Range & Gas Furnace Flex-Line (7/8 OD x 24, 3/4 FIP x 3/4 MIP, Up to 290,900 BTU) Home & Garden Improvement
Product description
Corrosion-resistant coating protects from exposure to harsh cleaning & plumbing repair products Stainless steel construction; Ranges, furnaces & boilers; 100% leak tested; Approved for LP (propane) & natural gas; Approved for indoor & outdoor use; Designed, machined & assembled in USA; ANSI z21.24/CSA 6.10 & ANSI z21.75/CSA 6.27; 7/8 OD x 24 (3/4 FIP x 3/4 MIP); Up to 290,900 BTU
- NEW
- BRASSCRAFT
- BSSCSSB2124
BRASSCRAFT CSSD44-36 Gas Range & Gas Furnace Flex-Line, Stainless Steel
BrassCraft
Product description
BRASSCRAFT CSSD44-36 GAS FLXLINE 1/2IN ODX36IN - Gas Range & Gas Furnace Flex-Line (1/2" OD x 36", 1/2" MIP x 1/2" MIP, Up to 71,100 BTU)
Overview:
Appliance Accessories - Range Replacement Elements & Accessories - Connectors
Specification:
†Corrosion-resistant coating protects from exposure to harsh cleaning & plumbing repair products;†Stainless steel construction;†Ranges, furnaces & boilers;†100% leak tested;†Approved for LP (propane) & natural gas;†Approved for indoor & outdoor use;
- Corrosion-resistant Coating Protects From Exposure To Harsh Cleaning & Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Furnaces & Boilers
- 100% Leak Tested
- Approved For Lp (propane) & Natural Gas
Brasscraft CSSC44-72 Range and Gas Furnace Flex-Lines, Yellow
Product description
Connect your gas range, furnace or boiler with this Gas Range and Gas Furnace Flex-Line (5/8 in. OD (1/2 in. MIP x 1/2 in. MIP) x 72 in.) from BrassCraft. The connector features a corrosion-resistant coating to protect from harsh cleaning and plumbing repair products and can be used indoors or outdoors. The connector supports appliances up to 86,000 BTU.
From the Manufacturer
Brasscraft CSSC44-72 Gas Range and Gas Furnace Flex-Lines .
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Furnaces and Boilers Up To 86,000 Btu
- 100-Percent Leak Tested
- Approved For Lp (propane) and Natural Gas
User questions & answers
| Question: | What size are the fittings |
| Answer: | Absolutely. They have smaller bins that may work better, but the material is perfect. I have some in my freezer to separate my chicken and then I have some in my refrigerator to store cheeses and veggies. They are extremely sturdy! |
BrassCraft CSSC22E-24 P 5/8-Inch Outer Diameter Safety Plus Gas Appliance Connector with Excess Flow Valve
BrassCraft Mfg
Product description
BrassCraft's Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft's Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
- 1/2 In. ID (5/8 In. OD) corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. FIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi maximum. CSA certified
Latest Reviews
View all
Smd Soldering
- Updated: 24.07.2023
- Read reviews
Folding Rolling Walkers
- Updated: 17.07.2023
- Read reviews
Hitachi Power Drill
- Updated: 19.01.2023
- Read reviews
Snorkeling Kit For Adults
- Updated: 01.07.2023
- Read reviews
Electric Weedeaters
- Updated: 16.05.2023
- Read reviews