12 best duravent direct vent gas fireplaces

Simpson Dura-Vent 46DVA-HC Duravent Horizontal Square Termination Cap - 4" x 6 5/8" Direct Vent, Galvanized

Simpson Dura-Vent

Based on 103 reviews Check latest price

Product description

Simpson Dura-Vent CECOMINOD090671 Horizontal Square Termination Cap - 4" x 6 5/8" Direct Vent, Galvanized

  • 4"
  • For Direct vent gas stoves or fireplaces
  • Square horizontal termination cap
  • Aluminum finish
  • Twist lock construction

User questions & answers

Question: Is this for 4" or 6" pipe
Answer: My fireplace pipe was the normal gas vent pipe having a 4" pipe inside a larger pipe which was a little over 6" as I recall - the 4" pipe vents the hot air and the larger pipe provides the fresh air. I had the same concerns as you but this one worked perfectly for me. Have a great day!
Question: Does it rust in an ocean front installation
Answer: Hi there, I live about 5 mins walk from the bay waterfront, and so far after a year including rain, no signs of any rust or corrosion.
Question: will this fit D series duravent piping
Answer: This termination cap does work with Duravent D Series piping.
Question: does it rust
Answer: the vent is made from aluminum and stainless steel hardware is included. will not rust.

Simpson Dura-Vent Duravent Pro Square Horizontal Termination Cap, 5x8, Aluminum

Simpson Dura-Vent

Based on 27 reviews Check latest price

Product description

Use for standard and high-wind through-the-wall terminations. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors.

  • The Package Length of the Product is 34.29 centimeters
  • The Package Height of the Product is 43.18 centimeters
  • The Package Width of the Product is 41.91 centimeters
  • Package Weight: 2.381 kilograms

User questions & answers

Question: Does this come shipped in Duravent or Simpson packaging to show it's an authentic part
Answer: This came in a brown box, but had a Duravent label on the box. It fit perfectly.
Question: Will this work/be to code on a 50,000 Btu Williams propane heater
Answer: ,, just put your question to Drew event they'll tell you
Question: I have a fireplace that has a vent made up of a 5” inner pipe and 8-9” outer pipe around the 5” pipe. Will this fit
Answer: This’s for 5 x 8 inch; not 5x 9 inches
Question: How does this fasten to the end of the pipe? Is there a detailed manual available
Answer: Use the mounting instructions that came with your stove.

Simpson Dura-Vent Wall Thimble Exhaust Vent Pipe Direct Vent 6-5/8" Galvanized, 4 x 6-5/8 (CECOMINOD089010)

Simpson Dura-Vent

Based on 94 reviews Check latest price

Product description

The DirectVent Pro 4" x 6-5/8" Inner Diameter Galvanized Wall Thimble is a component that is used in a typical venting installation. The DirectVent Pro wall thimble provides a complete wall-pass-through and fire stop. Use with Square Horizontal Cap only. May be required in Canada. Refer to the appliance manufacturer's installation instructions for requirements. Features: Type: Wall Thimble. Collection: DirectVent Pro. Use with Square Horizontal Cap Only. Provides a Complete Wall-Pass-Through and Firestop. UL Listed. Specifications: Overall Dimensions: 10" (L) x 10" (W) .

  • Wall thimble provides for a complete pass through and fire stop
  • For use with direct vent gas appliances vented horizontally
  • For direct vent gas stoves and fireplaces
  • For 6-5/8"OD exhaust vent pipe
  • Exterior laser welded seams

User questions & answers

Question: What is the size of the outer flange? I need to route a 4" inner diameter with 6 5/8" outer through an outside wall, will this thimble do the job
Answer: yes this thimble is what you need your 6 5/8 pipe will runs through it .p/s the thimble is very well made (heavy duty)
Question: does this fit in a 6" thick wall
Answer: I used this Wall Thimble on a 4" wall but I believe it will work on a 6" wall as the two thimble halves "telescope" together and bottom out for the 4" wall and would "telescope" out an additional 2", leaving a 2" overlap pf the inside diameters.
Question: Does this thimble seperate into 2 pieces for installation
Answer: Yes, the thimble does separate into several pieces! It is not difficult to install and my husband did the project in a day! You just have to get everything assembled and then it won't take long at all! Good Luck!
Question: Does one half need to goo over the finished wall
Answer: Yes. One half is on the inside against the sheet rock or whatever your inner finish is. The outer half is against the outside wall. The directions are pretty simple.

Simpson Dura-Vent 46DVA-E90 Duravent Direct Vent Galvanized 90 Degree Elbow

Simpson Dura-Vent

Based on 36 reviews Check latest price

Product description

The DirectVent Pro 4" x 6-5/8" Inner Diameter Galvanized 90 Degree Elbow is a component that is used in a typical venting installation. The 90 degree elbow for the DirectVent Pro series is used to offset obstructions as needed. It is fully unitized with twist-lock construction. The elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will always remain fixed at 90 degrees. Features: Type: Elbow. Swivel Elbows. Material: Galvanized. Collection: DirectVent Pro. UL Listed. Specifications: Overall Dimensions: 6.62" (W). Elbow Angle: 90 Deg.

  • Configuration: Elbow.
  • Fuel Type: Gas, Liquid Propane.
  • Material: Aluminum, Galvanized Steel.
  • Pipe Inside Diameter: 4 x 6-5/8.

User questions & answers

Question: What degree range does this elbow adjust or swivel
Answer: The bottom collar on the elbow swivels to allow it to point in any direction after it is twist locked. The angle of the elbow is not adjustable, it is fixed at 90 degrees.The Stove Store541-886-3000
Question: Is this suitable for exterior use
Answer: No reason it couldn't be used outdoors but it would have to be supported it shouldn't be used to bear weight of a stack
Question: Are these elbows adjustable back to 45 degrees
Answer: yes

Simpson Dura-Vent 46DVA-48, Stainless Steel

Simpson Dura-Vent

Based on 6 reviews Check latest price

Product description

DirectVent Pro Collection 4" x 6-5/8" Inner Diameter Galvanized 48" Inner Diameter Pipe Length The DirectVent Pro 4" Inner Diameter Galvanized 48" Inner Diameter Pipe Length is a component that is used in a typical venting installation. The DuraVent 48" direct vent pipe is designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4"x6-5/8" and 5"x8" vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1/2” for each joint. No beads or hems. Galvanized pipe lengths feature exterior laser-welded seams. Features: Length: 48" Inner Diameter: 4" Outside Diameter: 6 5/8" Material: Galvanized Steel Designed for Appliances Tested and Listed for Direct Vent Features Fully Unitized Twist-Lock Construction No Beads or Hems DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All pipe lengths, pipe extensions, and elbows feature laser-welded outer wall seams for a sleek finish. Low-profile locks and no hems or beads allow for a beautiful product that looks elegant in any interior. DirectVent Pro is a unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces. Looking for Simpson Dura-Vent? You found it! Simpson Dura-Vent has changed their name to DuraVent. DuraVent is a recognized technological leader in the venting industry. Consistently the first to market with new innovations in venting systems, DuraVent has captured a leadership position in emerging markets. DuraVent has patents for several products and continues to design safe and technologically advanced venting. The company's research into solving problems with corrosion, when biofuels such as corn are used, led to the break-through patent for PelletVent Pro

  • DirectVent Pro is a complete venting system designed for use with gas direct vent stoves, heaters, and fireplaces.
  • Safely vents flue gases, while providing incoming combustion air.
  • Construction Materials: . 020" aluminum inner wall with . 018" galvanized steel outer wall.
  • Dimensions: 4" ID x 6 5/8" OD x 48'' long.

User questions & answers

Question: is this galvanized or stainless? they're not the same but ad has both
Answer: Galvanized I believe

M&G DuraVent Duravent Inner Diameter - DirectVent Pro Direct Vent Pipe, Galvanized, 4 x 6-5/8

M&G DuraVent

Check latest price

Product description

The DirectVent Pro 4" x 6-5/8" Inner Diameter Galvanized Chimney Conversion Kit B is a component that is used in a typical venting installation. The chimney conversion kit includes cap adapter and a retro connector. DirectVent Pro 4" x 6-5/8" Termination Cap and 4" flex are sold separately. Use the chimney conversion kit with 4" x 6-5/8" direct vent gas stoves and existing through the ceiling wood stove metal chimney. Route the exhaust gases and intake air through the existing wood stove metal chimney. Includes: Cap Adapter and Retro Connector. Features: Type: Conversion Kit. Kit Type: B. Collection: DirectVent Pro. Used in a Typical Venting Installation. UL Listed. Specifications: Overall Dimensions: 10.5" (W) x 5.88" (H). Top Diameter: 6.62". Bottom Diameter: 10.5".

  • Used in a typical venting installation.
  • Kit includes cap adapter and a retro connector.
  • Use the chimney conversion kit with 4" x 6-5/8" direct vent gas stoves and existing through the ceiling wood stove metal chimney.
  • Route the exhaust gases and intake air through the existing wood stove metal chimney.

Duravent Storm Collar Direct Vent

DuraVent

Based on 12 reviews Check latest price

Product description

4" x 6-5/8" DirectVent Pro Galvanized Storm Collar The DirectVent Pro 4" Inner Diameter Galvanized Storm Collar is a component that is used in a typical venting installation. The storm collar is used to maintain a weather tight resistant seal between the pipe and the flashing. Features: Maintain a Weather Tight Resistant Seal Between Pipe and Flashing Inner Diameter: 4" Outside Diameter: 6-5/8" DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All black pipe lengths, pipe extensions, and elbows feature laser-welded outer wall seams for a sleek finish. Low-profile locks and no hems or beads allow for a beautiful product that looks elegant in any interior. DirectVent Pro is a unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces. Looking for Simpson Dura-Vent? You found it! Simpson Dura-Vent has changed their name to DuraVent. DuraVent is a recognized technological leader in the venting industry. Consistently the first to market with new innovations in venting systems, DuraVent has captured a leadership position in emerging markets. DuraVent has patents for several products and continues to design safe and technologically advanced venting.The company's research into solving problems with corrosion, when biofuels such as corn are used, led to the break-through patent for PelletVent Pro. Scientifically proven materials and unequalled engineering make DuraVent products not only the best choice, or safest choice, but the only choice for professional quality venting products.

  • Use to maintain a weather tight resistant seal between the pipe and the flashing.
  • 6-5/8” Inner Diameter
  • 10-5/8” Outer Diameter

Simpson Dura-Vent Duravent Support Box Direct Vent [Misc.], 4 x 6-5/8, Black

Simpson Dura-Vent

Based on 3 reviews Check latest price

Product description

"SIMPSON DURAVENT" DIRECT

VENT SUPPORT BOX

*For direct vent gas stoves

or fireplaces

*Cathedral ceiling support

box

*Black finish

*Twist lock construction

*Exterior laser welded seams

*For use with 6-5/8"OD

direct vent gas appliances

vented vertically

*Replaces Ace no. 4168845

  • For direct vent gas stoves or fireplaces
  • Cathedral ceiling support box
  • Black finish
  • Twist lock construction
  • Exterior laser welded seams

Simpson Duravent 58DVA-E90 5x8 Direct Vent Galvanized 90 Degree Elbow

Simpson Dura-Vent

Based on 16 reviews Check latest price

Product description

DirectVent Pro Collection 5" x 8" Inner Diameter Galvanized 90 Degree Elbow The DirectVent Pro 5" Inner Diameter Galvanized 90 Degree Elbow is a component that is used in a typical venting installation. The 90 degree elbow for the DirectVent Pro series is used to offset obstructions as needed. It is fully unitized with twist-lock construction. The elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will always remain fixed at 90 degrees. Features: Elbow Angle: 90° Inner Diameter: 5" Outside Diameter: 8" Elbows Swivel DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All black pipe lengths, pipe extensions, and elbows feature laser-welded outer wall seams for a sleek finish. Low-profile locks and no hems or beads allow for a beautiful product that looks elegant in any interior. DirectVent Pro is a unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces. Looking for Simpson Dura-Vent? You found it! Simpson Dura-Vent has changed their name to DuraVent. DuraVent is a recognized technological leader in the venting industry. Consistently the first to market with new innovations in venting systems, DuraVent has captured a leadership position in emerging markets. DuraVent has patents for several products and continues to design safe and technologically advanced venting. The company' s research into solving problems with corrosion, when biofuels such as corn are used, led to the break-through patent for PelletVent Pro. Scientifically proven materials and unequalled engineering make DuraVent products not only the best choice, or safest choice, but the only choice for professional quality venting products.

  • Fully unitized twist-lock construction.
  • All elbows include a swivel, allowing the lock to remain fully engaged, while aligning the elbow in the desired direction.
  • The angle will remain fixed at 90.
  • Galvanized.

User questions & answers

Question: What is the diameter of the pipes? 8" and
Answer: Yes both. This pipe is two pipes in one. So the inside pipe is 5" and the outer pipe is 8".

Simpson Dura-Vent 46DVA-E90B, Black

Simpson Dura-Vent

Based on 24 reviews Check latest price

Product description

The Direct Vent Pro 90Degree Elbow features a fully unitized twist-lock construction. All elbows include a swivel, allowing the lock to remain fully engaged, while aligning the elbow in the desired direction. The angle will remain fixed at 90Degree. DuraVent Direct Vent Pro is a complete venting system designed for use with gas direct vent stoves, heaters, and fireplaces.

  • Configuration: Elbow.
  • Fuel Type: Gas, Liquid Propane.
  • Material: Aluminum, Galvanized Steel.
  • Pipe Class: Direct Vent.
  • Pipe Inside Diameter: 4 x 6-5/8.

User questions & answers

Question: What is the outside diameter of this pipe
Answer: The outer diameter for this pipe is 6-5/8"
Question: Can this elbow be installed directly onto the stove
Answer: I did with mine. I hooked it directly to the stove.
Question: Does this elbow swivel
Answer: Yes it does. I bought 2 and only used one if you want to buy my extra please let me know.

Simpson Duravent 58DVA-E45 5x8" Direct Vent Galvanized 45 Degree Elbow

Simpson Dura-Vent

Based on 7 reviews Check latest price

Product description

Galvanized Elbow 58DVAE45 - 45 Degree. Features: Use to offset obstructions as needed. Fully unitize, twist-lock construction. Elbows swivels, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45 degrees. Specifications: ADA Compilant: No. Elbow by Angle: 45 (degree). Finish: Galvanized. Fuel Type: Gas Natural, Liquid Propane. Height: 8-7/8. Material: .020

  • Use to offset obstructions as needed.
  • Fully unitize, twist-lock construction.
  • Elbows swivels, allowing the lock to remain fully engaged while aligning to the desired direction.
  • Galvanized.

User questions & answers

Question: Are the 5x8 meaurements a ture 5x8 or is it a reference to a 5 5/8x8 which is what I am measuring when measuring the outlets to my gas insert
Answer: You will probably need an adaptor from your stove to the Duravent (I did)...it is 5” for inner duct and 8” for outer
Question: Diameters of the 2 pipes
Answer: 5" inside, 8" outside.

DuraVent 46DVA-HSC 4" Inner Diameter DirectVent Pro Direct Vent Pipe - Galvanize, Galvanized

Simpson Duravent

Based on 8 reviews Check latest price

Product description

4" x 6-5/8" DirectVent Pro Galvanized Sconce Termination Cap (Aluminum) The DirectVent Pro 4" x 6-5/8" Galvanized Sconce Termination Cap (Aluminum) is a component that is used in a typical venting installation. This patented sconce termination cap is used for horizontal through the wall terminations. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Check with appliance manufacturer for approval. Features: Diameter: 6-5/8" Use for Horizontal Through-the-Wall Terminations Dimensions: 11-1/16"L x 11" W x 12-5/8" D DirectVent Pro features tight inner connections for superb performance, with no gaskets or sealants required (unless specified by the appliance manufacturer). All black pipe lengths, pipe extensions, and elbows feature laser-welded outer wall seams for a sleek finish. Low-profile locks and no hems or beads allow for a beautiful product that looks elegant in any interior. DirectVent Pro is a unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces.

  • Cap for Horizontal Termination
  • For Natural Gas or Propane Appliances
  • For use with Simpson DirectVent venting systems

User questions & answers

Question: Is the upper part covered
Answer: There is a thin metal plate covering the top portion of the intake to prevent water coming in
Question: Will this work for a 2x6 insulated exterior wall
Answer: Yes, but it's only the cap with about 4" of pipe attached- you'll need to extend it depending on your wall collar.
Question: does this come with a screen and damper
Answer: As I recall, it has a screen, but no damper.
Question: Does the temination cap have a locking collar or does it slip over the pipe
Answer: Mine just slipped over the pipe

Latest Reviews

View all