14 best dryer vent for gas dryers

Product description

Make dryer vent installation quick and easy while protecting the duct with our Easy Connecting Dryer Vent Hook Up Kit. 1 semi-rigid aluminum duct (8’ long) twists into the white polypropylene Hooker-Upper attachments, which slide into place over the dryer vent and outlet pipe. No clamps, tools or tape are needed. Some dryers require the included gasket for a proper fit. The Hooker-Upper protectors are designed to prevent the duct from being smashed behind the dryer, which helps prevent unsafe dryer operation and longer dryer times. Deflecto was founded on innovative, problem solving products. For over a half century, we have built a tradition of discovering and meeting needs with invention and dependable manufacturing. Today, Deflecto is the world’s largest chair mat, bicycle reflector and dryer venting manufacturer and a global leader in sign and literature holders, office workspace accessories and other air distribution products.

From the Manufacturer

Deflecto Hupk8wa/4 Easy Connecting Dryer Vent Hook-up Kit;

• Easy Connecting Dryer Vent Hook Up Kit includes 2 Hooker-Upper protectors, 1 semi-rigid aluminum 8’ long duct and 1 gasket
• Duct twists into Hooker-Upper protectors and slides over dryer vent and outlet pipe; No clamps, tools or tape necessary
• Hooker-Upper also protects the duct from being smashed behind dryer, which helps prevent unsafe dryer operation and longer drying times
• Kit contains 8’ long aluminum semi-rigid, flexible duct that allows quick, easy installation
• Gasket (included) may be needed for a proper fit on some dryers

User questions & answers

Question:	Is the duct hose 8 feet long
Answer:	Definitely not! The product dimensions state that it's 28 inches long, but I have a feeling that's the shipping size, and it will stretch somewhat longer than that, but NOT 8 feet!
Question:	Confused how this attaches to the dryer. Does it include connectors that stay attached to the dryer and the wall and the pipe clips in
Answer:	It includes connectors. They are simply pushed into place. They will stay if there is not too much tension on the unit. I had to duct tape mine for them to stay in place.
Question:	Is this a lot strong than the foil ones? My cat shredded 2 of those
Answer:	My cat too shredded the foil type, so I ordered this one. This cannot be shredded, its made very strong. I was unable to use this however, as the ends easily slid off in attempts to connect it to the "tubes". When it has to go from high to low connections (or low to high) its stiffness makes it hard to stay on. If the connection is pretty much vertical its easier. But like a previous comment, you will need something to secure it to each end, especially with kitties around!
Question:	Can the plastic end withstand the dryer heat? Can the flexible duct be cut to size and put the plastic end secyrely back
Answer:	Yes! The plastic end can withstand the heat. Now here comes the problem! When you try to cut the flexible duct it starts to unreaval and you cannot get it to stop when you try to work with it. I ended up just throwing it in the trash.

Product features

About Us

Deflecto’s rich heritage was founded on innovative and problem solving products. It was in 1960, in the basement of C.P. Meyer’s home, that he invented the first air deflector. His idea was to develop something that would help prevent factory compressors from freezing up. It didn’t take long to realize his new invention could have a major impact on personal home comfort as well. He knew that by deflecting air away from windows and from under furniture, heating & cooling efficiency and comfort could be maximized. Five years later, a clever Deflecto employee turned a magnetic air deflector upside down on a metal filing cabinet in effort to organize invoices. With that, the first wall pocket was discovered, opening up the office products market for C.P. Meyer and his company.

Product description

Save energy and money with our Extra Heat Dryer Saver, an inline diverter that deflects the heat and humidity from your dryer’s exhaust into your home. An adjustable flap allows you to bring the warm air in during the colder months or send it outside during the warmer months. Attach standard dryer transition ducts (not included) to the 4” diameter openings with the included 4” plastic clamps. Clean filter screen after each use for optimal performance and safety. In small rooms, open the doors for adequate distribution of heat and moisture. Please follow these safety warnings: Do not vent gas clothes dryers into bathrooms or bedrooms. Some building codes may restrict the use of this product, always check the local codes in your area. Deflecto was founded on innovative, problem solving products. For over a half century, we have built a tradition of discovering and meeting needs with invention and dependable manufacturing. Today, Deflecto is the world’s largest chair mat, bicycle reflector and dryer venting manufacturer and a global leader in sign and literature holders, office workspace accessories and other air distribution products.

From the Manufacturer

Deflecto Ex12 Heat Saver & Lint Trap; Converts Clothes Dryer Into Extra Source Of Heat; Includes Diverter To Allow Exhausting Outside During Warmer Weather

• Save the heat from your clothes dryer and divert it into your home with our Extra Heat Dryer Saver; Accommodates 4” diameter dryer ducts
• Adjustable flap deflects heat and humidity inside during cold weather and deflects them outside during warm weather
• Saves energy and money; Clean filter screen after each use for optimal performance and safety
• Do not vent gas clothes dryers into bathrooms or bedrooms; Some building codes may restrict the use of this product, always check the local codes in your area
• Open doors in small rooms for adequate distribution of heat and moisture; Use with UL listed Supurr-Flex clothes dryer transition duct (not included)
• Product Dimension: 7.875 X 5.875 X 5.375 Inches

User questions & answers

Question:	Do i have to slice the hose in half to put on or do I have to purchase different one
Answer:	Yes! this fits your Model!
Question:	how dose it mount to the wall
Answer:	No! you need part number WB02X11534
Question:	Is the lever delicate? 2. Is there a dusty coating over everything in the room
Answer:	you need part number 5303319568
Question:	Can you use it with a gas dryer. If no, why not
Answer:	Perfectly ~nice to have clean filters. When old GE ones taken out exact same shape, design.

Product description

If your dryer hasn’t been doing its job and is constantly leaving your clothes wet or damp, it may be time to invest in one of our amazing connector products. At ZIGGURAT we strive to provide a safe and easy alternative for dryer connectivity that will make sure that your dryer connections are secure and working at maximum capacity. Let this simple dryer vent duct connector be your next purchase. Not only does this item ensure safety with it’s easy to clean capabilities that help prevent dryer fires, but it is also built with products and materials all based in the USA to ensure top quality. The simple snap on feature of this dryer connection elbow piece makes the installation quick and easy for everyone. There’s no need for tools of any kind or an attachment clamp. Connecting this angled attachment to your dryer couldn’t be easier, and our products are built to last. There will be a snug fit both to your appliance and to the wall as it grips tightly to ensure connection security. Our universal dryer connector is made of soft rubber and other sturdy materials to make sure that no breaking, ripping, or crushing occurs when the connector is in use. This specific dryer vent connector has a total width of 5.55 inches. The opening has a diameter of 3.96 inches with the clear seal ring, and 4.08 without, to give a secure connection. Save yourself time and hassle with our efficient and powerful dryer wall connectors. Once you have witnessed or used one of our dryer connectors you will see why our products are the best. Make sure you get your clothes

• QUICK EASY INSTALLATION – This dryer hose is compatible with our snap-on attachments that are easy to use and require no tools. The flexibility of this dryer vent hose allows it to safely attach where needed without the hassle of forcibly moving the hose to fit the desired position. Just obtain the correct attachments on each end, connect to the dryer and the wall, and it will be ready for use.
• THE BETTER CHOICE – This aluminum dryer hose from ZIGGURAT provides a top-quality product that can be used by anyone in need of dryer connections. Our flexible dryer hose resolves the risk of potential dryer fires and helps create a better operating dryer. Lightweight and versatile, it attaches easily to connector pieces. These products are the best choice for simplicity and durability.
• BUILT TO LAST – Our STV-AlumFlexHose is designed to last a long time. With strong, yet flexible materials, we created the perfect electric dryer vent hose that will get the job done for many years to come. The clothes dryer hose is made to be easily cleaned out on a regular basis and made with quality materials to prevent crushing, ripping or other possible damage to the connection.
• TIGHT ATTACHMENT– This rigid dryer hose is made with a soft single layer of sturdy aluminum that has the capability to snugly attach to clothes dryer connectors. The flexibility of this dryer duct hose allows all the pieces to fit properly. The hose has a 4 inch diameter and is 8 feet long to give plenty of room to connect to the wall without being tugged or stretched to its full capacity.
• PRODUCTS MADE IN THE USA – Ziggurat Products were envisioned by a father and son who cared about safety and value. Our safe alternatives to air dryer hoses were designed to improve household safety. We rely on quality to sell our products. All of our products are made in the USA with top-quality materials. We create household accessories that make life easier our valued customers.

User questions & answers

Question:	Does this work with any 4in dryer duct
Answer:	Metal mesh great replacement would buy again
Question:	Is this safe for venting gas dyers
Answer:	I'm going to say no; searching the model number using the handy feature on the item page, does not return any results.
Question:	My boat bilge hose is tore, its 4 inches, I see no difference between this and the much more expensive hoseing in the boat parts, can I use this
Answer:	I can’t say for sure. It did fit my Kenmore Dryer
Question:	Is this durable enough to stand up to removing it to clean and reinstall
Answer:	Seller didn't mention that brand, and I'm not familiar with it either

Product description

When outside venting is impossible for your clothes dryer installation, our lint trap kit with Supurr-Flex metallic duct and clamps is your solution. With quick, easy installation, it fits on most clothes dryers. Includes 4’ dia by 5’ long flexible dryer vent and two clamps. The lint trap requires 4 cups (32 oz) of water to function properly. Please follow these safety warnings: Do not use with gas clothes dryer. In small room open doors for adequate distribution of heat and moisture. Some building codes may restrict the use of this product, always check the local codes in your area Deflecto was founded on innovative, problem solving products. For over a half century, we have built a tradition of discovering and meeting needs with invention and dependable manufacturing. Today, Deflecto is the world’s largest chair mat, bicycle reflector and dryer venting manufacturer and a global leader in sign and literature holders, office workspace accessories and other air distribution products.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Deflecto LTF Lint Trap.

• Designed for safe indoor dryer venting where outside venting is impossible; Includes lint trap, metallic transition duct and 2 clamps
• Quick, easy installation, fits most clothes dryers; Do not use with gas clothes dryers
• Lint trap requires 4 cups (32 oz.) of water for use; In small rooms open doors for adequate distribution of heat and moisture
• The container is constructed of calcium filled polypropylene, with a melting point of 325 degrees F; Flexible dryer vent duct has an operating temperature of 265 degrees F
• Please note: some building codes may restrict the use of this product, always check the local codes in your area

User questions & answers

Question:	Will this system cause thd dryer not to turn on
Answer:	I don't see why it would keep your dryer from coming on. I love mine so much, I got one for my daughter. I used it all last winter and then disconnected it and returned the air hose to the outside vent in the Spring. I just reconnected it yesterday to vent back inside, now that the weather is getting cooler. My dryer is about 6 years old, but my daughter's is only 2 years old and the deflecto dryer lint trap works great with both our machines. We are using it to keep all that heat and humidity inside for the winter while it is cold and dry outside. Hope this is helpful.
Question:	How many gallons of water you can put inside? I am using simple bucket with some nylon net to catch lint
Answer:	I don't known how many ounces it holds but it does not hold a gallon or anywhere near that much.
Question:	What size is the tube connection
Answer:	same as the dryer vent.
Question:	Can you use this with gas dryers? Our Gas dryer is located in the garage without access to a wall for outdoor venting
Answer:	We have a similar set up, in the garage without access to a wall for outdoor venting. We’ve used this device for many years. We have a super long coil attached so we open the garage door and leave it outside while using the gas dryer. We replace this vent every other year. It’s worked fine up until now, thankfully!

Product features

Deflecto Dryer Lint Trap Kit, Supurr-Flex Flexible Metallic Duct

• For indoor dryer venting
• Quick, easy installation
• Not recommended for gas dryers
• Supurr-Flex metallic duct

Product description

Dundas Jafine TDIDVKZW ProFlex Indoor Dryer Vent Kit with 4-Inch by 5-Foot ProFlex Duct

From the Manufacturer

This ProFlex indoor dryer vent kit includes a 4-inch by 5-foot UL 2158A listed and marked ProFlex transition duct, a plastic lint reservoir, and 2 plastic clamps. This item is used to vent your electric dryer indoors when outside venting is not possible. It is ideal for apartments, condominiums, and RVs Never use this product with a gas clothes dryer.

• Can be used to vent your electric clothes dryer indoors when outdoor venting is not possible
• Includes 4-inch by 5-foot ProFlex dryer transition duct, plastic lint reservoir, 2 plastic adjustable clamps
• Ideal for apartments, condominiums and RVs
• ProFlex dryer transition duct UL approved for safe dryer venting
• Not be used with gas clothes dryers

User questions & answers

Question:	how do i prevent the lint from coming out the holes of this it seems like its defeating the purpose of having this
Answer:	Make sure you have water in it & then Clean like you would any lint trap . I empty mine after every 2nd dryer load.
Question:	Does this kit work with Haier electric dryers
Answer:	Yes, I put a nylon sock over it. I change the lint filter in the dryer after every load and nothing ever comes out of the Dundas Jafe dryer vent kit. I have used this for about a year now.
Question:	does it have a filter
Answer:	I've used this type dryer vent for 20 years. Instead of water in the basket I have strips of terry cloth I wet as I fill the washer & wrap around the holes in the lid & change them each week. The terry acts like a lint filter. I shake the lint off in the trash & toss the terry strips in the laundry & replace it when I toss the clean load in the dryer.
Question:	I understant the way it collects the lint, but what happens to the humidity? Will I end up with wet walls
Answer:	I can't speak for the problems others are claiming to have but this only uses about a half a cup of water and then there's the moisture in the air coming from the dryer but ... I live in the South and it's humid down here. I haven't noticed any increase in the humidity from using my little dryer with this vent kit. None. I have a hygrometer and thermometer in every room and other than the room where the washer and dryer are none of the rest of the house gets any significant increase in humidity. I only do laundry once a week, about three loads total, so others might have different results if they use their washer and dryer more. As for the water you put in the vent to catch lint, well you lose that much water to water vapor cooking dinner so that's not really a thing to worry about.

Product features

ProFlex Indoor Dryer Vent Kit

Dundas Jafine’s Proflex Indoor Dryer Vent Kit Can Be Used To Vent Your Electric Clothes Dryer Indoors When Outdoor Venting Is Not Possible. This Kit Is Ideal For Apartments, Condominiums And R.V.S.

This Product Should Not Be Used With Gas Clothes Dryers.

Product description

4 inch 8 feet

Dryer Vent Transition Duct

Condition: New



This is a pretty easy repair, simply remove the old hose and replace it with the new one.



The dryer transition duct allows the dryer to be close to the wall and provides maximum flexibility in the laundry room. When properly installed on the exhaust pipe, it provides a safe and proper airflow to speed up drying time. The dryer transition tube can be used in electric and gas dryers.



Fits most commonly used electric and gas dryers from Whirlpool, Kenmore, Maytag, Amana, Electrolux, Samsung, LG, GE, and more.



Any question please contact us and we promise to work hard to help you to solve this problem.

• ► Dryer Vent Hose - 4 inch 8 feet, with 2 clamps. Dryer hose is the flexible material that can be used to transition between the dryer and the duct. It should be used sparingly, stretched tight, not smashed, and replaced regularly.
• ► Excellent Product Performance - Made from durable high-quality material and well-tested before shipping. It will fit perfectly when properly installed to an exhaust duct, it provides a safe and proper airflow to speed up drying time.
• ► Quick Repair - This is a pretty easy repair, simply remove the old hose and replace it with the new one.
• ► Compatible - Fits most commonly used electric and gas dryers from Whirlpool, Kenmore, Maytag, Amana, Electrolux, Samsung, LG, GE, and more.
• ► Warranty & Support - Truly worry-free 3-month warranty and friendly customer service. If the dryer vent hose fails, feel freely to contact us.

User questions & answers

Question:	Will this work with a portable dryer like a Panda
Answer:	Worked great fit perfectly
Question:	Will this fit a Speedqueen dryer
Answer:	Yes, it will fit any dryer.
Question:	It says to stretch tight and I only need about 5-6 ft. Is it a problem not to stretch
Answer:	Don't really see why it would be. Thought I only needed 6 feet, but I used it all. Really like this product.
Question:	What is the Temperature rating? Thanks looking to make sure I can attach to my dryer
Answer:	No idea what the temperature rating is. But I have a"regular" Maytag dryer (away from home, so can't look up model #). I attached the new vent hose last month. It's been working just fine -- no over-treating issues, etc. All's well.

• DOES THE TRICK: The Snap-to-Vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. No more fiddling around with rigid metal dryer clamps!
• SAVES YOU MONEY: Our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. This means your clothes get dryer faster and you save money on your power bill!
• AVOID THE HEADACHE: The STV-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow. Simply slide it on and push your dryer back.
• WORKS WITH YOUR HOSE: We’ve updated our design to fit any 4” vent ducting, whether beveled or straight. You don’t need to go searching for the right sized clamp anymore--we’ve got you covered!
• EFFORTLESS AND DURABLE: Our sturdy elbow connector makes set up simple and a one-time project. Your STV-90 is sure to last longer than any other duct clamp out there!

User questions & answers

Question:	Do you have to use the rubber sleeve. The unit slips on and off with ease however I don't want it popping off
Answer:	I felt that without the rubber gasket it would come off. It holds really tight with the gasket. Mine did come off without it. I slid the gasket onto the dryer first then pushed the ring onto it.
Question:	Can it be turned upside down to vent through the floor
Answer:	Yes, it can be turned upside down and attach the hose to connect to dryer. As long as it is a 4" beveled duct.
Question:	Can it be be turned to the side or does it have to be straight up
Answer:	Yes, you can turn it to the side to run the hose horizontally to the floor.
Question:	Would this product work with the xtremepowerus stainless steel tumble cloths dryer compact dryer
Answer:	as long as the exhaust duct on the dryer is 4", then there shouldn't be a problem. Refer to the owner's manual for the dryer to see if there are any special considerations for the exhaust vent.

Product features

Snap to Vent 90 Degree Elbow

Best use and practices when using Snap to Vent 90 Degree Elbow:

1. Prevents crushed hoses on back of dryer
2. Fits all 4" flexible dryer hose
3. Fits on all 4" dryer duct with bevel side out both on dryer and wall
4. Seal is tacky to create a good seal between duct and connector

Snap to Vent Pieces

• Quick and easy install, snap and plug into the duct
• Preent crushed hoses and hoses from falling off the back of your dryer
• Makes dryer duct easy to cleanout for best dryer efficiency
• Patent Pending technology
• Made in USA!

Product description

This 084149 Zero Periscope is specifically designed for use in situations where the dryer Outlet overlaps or is very close to the wall Outlet. The 2 inch by 6 inch smooth aluminium construction telescopes to handle outlets up to 5 inches distance from center to center. The 4 inch diameter draw band collar synchs down over the clothes dryer vent i. e. . The 4 inch diameter crimped fitting slides into most wall ies. Once installed, it needs only 2. 5 inches clearance behind the dryer. If your outlets are very close and you need to move the dryer closer to the wall, this vent maintains critical airflow and provides all metal performance. Clothes dryer manufacturers specify "only rigid or flexible metal vent shall be used for exhausting. Do not use plastic or metal foil vent. " installation instructions are included inside each carton. The zero periscope is built in the USA by Builder's Best.

User questions & answers

Question:	How is one supposed to be able to fit into a cramped space to install this?? If it doesn’t accordion out, allowing me space to fit my body to tighten
Answer:	My opinion is, it is a waste of time & money.Mine crumbled and I never got it installed.Threw it away in anger!
Question:	how quick does it fill with lint
Answer:	The short answer is that it should not fill with lint. If the dryer is operating properly, it will maintain enough air velocity to carry the lint through the exhaust system to the outside. Inside your clothes dryer manual there should be a chart which tells you the maximum length of run and number of 90 degree turns which the dryer can expel the lint effectively. This periscope helps the dryer by providing rigid structural metal support so that crushing at the exhaust of the dryer into the wall should not be an issue. Then you need to follow the rest of the exhaust system to the outside to make sure there are no impediments. Thank you for your question.
Question:	I have a depth of 33.5 and the depth of my new dryer is 30.25 will this help so that the dryer will fit in that depth
Answer:	This periscope can install within 2.5 inches of the wall. However, please see the image with the function venting distance dimensions. Your wall vent must be within 5 inches of the clothes dryer vent for this 0-5 periscope to help you. Also, the crimped end of the periscope must slide into the wall pipe in order to achieve the tightest fit. If your outlet is not within 5 inches, there are longer periscope dimensions 0-18, 18-29 and 29-50 which are available and may help.
Question:	Can this be installed in the home we purcgased that is over one year old? Or must this go jn new homes only
Answer:	The Zero to 5 periscope is designed with a 4" diameter draw band collar that connects to a clothes dryer exhaust. The crimped fitting is designed to go into a wall exhaust pipe. The material and diameters of the wall exhaust pipes vary widely. The age of the home is usually not an issue. The diameter and material of the wall exhaust pipe can be an issue, so it is important to measure first. The wall pipe should ideally be a 4 inch connection so that our slightly smaller crimped fitting with insert into it. If the protruding wall exhaust pipe is aluminum, it can help to cut a slit in the wall exhaust pipe so that the crimped fitting will insert and then, if possible, a clamp can be tightened around the connection if there is access. Then please remember, this 0-5 Periscope only extends a total of 5 inches from the center of the clothes dryer exhaust to the center of the wall outlet pipe.

Product features

Builder's Best 010149 Adjustable Dryer Vent Periscope

- 0 to 5-inch telescoping rigid dryer vent for overlapping or very close outlets.

- Only requires 2 1/2 inches of clearance between the wall and the dryer.

- Smooth interior decreases air friction; draw-band collar for dryer connection; Crimped fitting for wall connection.

- Recommended by dryer manufacturers.

- Made in the USA out of 100 percent aluminum.

Product description

Lint Trap With 4" x 5' Lama Flex, 2 Clamps, Polybagged

• Item Weight: 1.08 lb
• Country of Origin: United States
• Brand name: Broan-NuTone
• Item Dimensions: 1.0"L x 6.5"W x 5.75"H

User questions & answers

Question:	How do you get the bottom canister off to clean it? Does it turn left or right and or pull down
Answer:	The same size as all zippo's. A little taler than my thumb and a little shorter than it in length. Its a great Zippo i love it it looks great. And its a great size.
Question:	How much does this vent increase humidity in the room
Answer:	NOT Etched. It is a 2 piece cast metal plaque on my lighter, which appears to be pewter, applied to the case. Not apparent how it is attached but it appears to be glued or soldered. My lighter is dated J 19 so is October 2019 production. Case with plaque is 0.600" thick at the thickest while a normal Zippo case is 0.504" thick so the plaque adds almost 0.100" to case thickness and 0.55 ounce to the weight, 2 ounces versus 2.55 ounces. I just received the lighter so no idea of the permanence of the plaques attachment.
Question:	using indoors wont cause a moisture problem
Answer:	Thank you for your pertinent opinion. We need a watch with ignition function for women, right? We will discuss the development with the boss
Question:	I see people saying they put a nylon over the top but how? If the silver vent is going into the top, where are you putting the nylon? How
Answer:	The USB does both

Product description

Builder's Best 011718 All Metal SAF-T Single Elbow Dryer Vent Duct Kit, UL Listed, 4" Diameter x 8' Length

• This is a 8-feet UL Listed flexible metal (semi-rigid) transition duct attached to one Close Elbow. The original Close Elbow by Builder's Best is designed to make 90˚ turns within 4″
• Maximum velocity for this duct is 5,000 FPM. Temperature can range from - 100 degrees Fahrenheit to + 430 degrees Fahrenheit
• UL Listed and Labelled: Complies with all clothes dryer manufacturer recommendations
• Comes with 2 additional steel screw clamps
• Quality made in the USA by Builder's Best, Inc. Builder's Best brand is a US registered trademark. SAF-T-DUCT is a registered trademark by Builder's Best, Inc. SAF-T-DUCT Dryer Venting is the trusted solution for professional installers nationwide. It meets all clothes dryer manufacturer specifications

User questions & answers

Question:	Can this be used for oven hood duct system
Answer:	Sure it can be used as a hood duct, on the premise that you have access to cleaning weekly it and that your range hood cfm requirements are so low that it only needs a 4 inch duct. Or get an hvac person to ask questions or do that job for you, since your question was asked, I assume you are not proficient with HVAC cfm requirements for a range hood or the constant cleaning/dangers that are involved in using a duct system with ribs. Good luck!
Question:	are u able to connect more than one piece together? ex 16' of this
Answer:	You would have an elbow on each end but if that is what you need then yes you can connect two 8' to make 16'.
Question:	I purchased this kit and installed it on my drying. The hose gets hot even when I'm drying on a low setting. Is that normal
Answer:	Of course, you are venting very hot air and its metal. Plastic vent ducts do not get as hot.
Question:	Could this be used for bath exhaust? I need the 90 to vent through the soffit which is a tight fit
Answer:	This is an exhaust vent pipe. If it fits it should work for any vent. It is flexible and will bend to fit.

Product description

For home improvement, connect your gas or electric dryer to the exhaust vent with this fire-resistant, semi-rigid flexible aluminum duct. 4” diameter by 24” long, with male and female connectors. Durable construction won’t get mashed or bent out of shape during handling and installation, and will hold the shape you give it without sagging. Permanently attached rotating collar on the female end make connection and rotation a snap, and maintains an airtight seal while in use. Deflecto was founded on innovative, problem solving products. For over a half century, we have built a tradition of discovering and meeting needs with invention and dependable manufacturing. Today, Deflecto is the world’s largest chair mat, bicycle reflector and dryer venting manufacturer and a global leader in sign and literature holders, office workspace accessories and other air distribution products.

• Semi rigid aluminum duct has a 4” diameter and 24” length
• Flexible enough for ease of installation, and holds the shape you put it in without sagging
• Fire-resistant aluminum construction is perfect for gas and electric dryer applications
• Permanently attached female collar and crimped male end for ease of connection, rotation, and consistent airtight use
• Durable material holds up during handling and installation

User questions & answers

Question:	What length can the duct be compressed to
Answer:	Manufacturer Deflect-o Products Part Number MAC36024/6 Item Weight 4.8 ounces Product Dimensions 9.38 x 4.75 x 9.94 inches So, after you take them out of the box the compressed length of the ducts is a little bit under 9.94 inches
Question:	Is it a three piece
Answer:	The product is one piece. The picture illustrates the various ways it can be flexed for your application.

Product features

Deflecto Semi Rigid Aluminum Duct with Attached Connectors, Silver

Semi-rigid duct with integrated male and female connectors, Easy to install without clamps, tools or tape. Integrated connectors help prevent crushing. Extends up to 24". Use for kitchen or bathroom venting and forced air distribution.

• Easily connects without the use of clamps, tools or tape
• Extends up to 24"
• Fire-resistant
• Integrated connectors help prevent crushing of duct to ensure a secure connection

Product description

If your dryer hasn’t been doing its job and is constantly leaving your clothes wet or damp, it may be time to invest in one of our amazing connector products. At ZIGGURAT we strive to provide a safe and easy alternative for dryer connectivity that will make sure that your dryer connections are secure and working at maximum capacity. Let this simple dryer vent duct connector be your next purchase. Not only does this item ensure safety with it’s easy to clean capabilities that help prevent dryer fires, but it is also built with products and materials all based in the USA to ensure top quality. The simple snap on feature of this dryer connection elbow piece makes the installation quick and easy for everyone. There’s no need for tools of any kind or an attachment clamp. Connecting this angled attachment to your dryer couldn’t be easier, and our products are built to last. There will be a snug fit both to your appliance and to the wall as it grips tightly to ensure connection security. Our universal dryer connector is made of soft rubber and other sturdy materials to make sure that no breaking, ripping, or crushing occurs when the connector is in use. This specific dryer vent connector has a total width of 5.55 inches. The opening has a diameter of 3.96 inches with the clear seal ring, and 4.08 without, to give a secure connection. Save yourself time and hassle with our efficient and powerful dryer wall connectors. Once you have witnessed or used one of our dryer connectors you will see why our products are the best. Make sure you get your clothes

• BUILT TO LAST – Our STV-M snap to vent straight piece connects to your existing dryer exhaust ducting. With strong, yet flexible materials, we designed the perfect way to create a clothes dryer connector that gets the job done efficiently. This dryer hose connector cleans out easily and is made with sturdy materials to prevent crushing, ripping or other possible damage to the connector.
• PRODUCTS MADE IN THE USA – The ZIGGURAT products were envisioned by a father and son who cared about safety and value. Our safe alternatives to dryer duct connectors were designed to improve household safety. We rely on quality to sell our products. All of our products are made in the USA with top-quality materials. We create household accessories that make life easier for our valued customers.
• QUICK AND EASY INSTALLATION – ZIGGURAT’s dryer hose vent snap on is so easy it requires no tools. It can be put together within minutes with just your own two hands. The simplicity of this snap on straight connector is that it allows you to begin dryer use right away. This piece is best placed directly behind dryer to connect the vent, but can also be used to attach to the wall vent outlet.
• THE BETTER CHOICE – This snap on dryer hose attachment from ZIGGURAT provides a top-quality product that can be used by anyone in need of dryer connections. Our dryer connectors resolve the risk of potential fires and help create a better operating dryer, and do not need to be attached by a clamp. These products are the best choice for simplicity and durability.
• TIGHT ATTACHMENT– The plastic dryer hose straight vent connect attachment is made with soft rubber that attaches snugly to the hose and your dryer with a secure seal. The flexibility and angle of this connector for dryer allows the pieces to fit properly and hug the wall when the appliance is placed against it. This straight snap-on connector piece has dimensions measuring 4 3/4"x4 3/4"x4 3/4".

User questions & answers

Question:	Is this kit available in 5" configurations that might be compatible with portable a/c exhaust vent hose
Answer:	these is not the 96 LED torches,but they are quite bright.The torch light with the 96 LED will cost around 15 USD-20USD for each.
Question:	Do you have a pipe connector to attach to exhaust pipe to outdoors
Answer:	No unfortunately
Question:	Currently have a 4 inch wall vent hood to exhaust my dryer. Will this connect/fit to that
Answer:	it comes in a Zippo plastic box and we could add a gift box
Question:	Will this attach to a 6 inch hose
Answer:	Hello Kevin. This is the date code that shows when the Zippo lighter was manufactured. Hope this helps.

Product description

Dundas Jafine PCLT4WZW Dryer Duct Lint Trap

• Reduce the risk of dryer Fire by keeping the dryer duct clean and free of lint
• Acts as a secondary lint trap for electric clothes dryers - not intended for gas dryers
• Fits all 4" Dryer Ducts

User questions & answers

Question:	Do you sell an oval one for in wall installation
Answer:	This is designed to be screwed onto the wall.
Question:	Why can't this item be used with a gas dryer
Answer:	I assume it is because it is made of plastic. Gas dryers may run hotter exhaust than electric dryers therefore increasing the risk of fire. I put this on an electric dryer to reduce the amount of lint that would accumulate in a long exhaust run. Seems well made.
Question:	Is this for 6" duct or 4" duct
Answer:	This is for a 4 inch duct.
Question:	does it come with hose clamps
Answer:	Yes, it comes with two hose clamps.

Product features

ProClean Dryer Duct Lint Trap

The Dundas Jafine ProClean Dryer Duct Lint Trap acts as a secondary lint trap for your electric clothes dryer and is not intended for use with gas clothes dryers. It installs easily onto your dryer transition duct and collects additional lint that is not captured by the standard dryer lint trap.

This product helps to eliminate excess lint within the duct, reducing the risk of dryer fire occurring and allowing the air to pass more easily through the duct, saving energy as the dryer runs more efficiently and in turn helping to reduce your home energy costs.

The clear door gives an unobstructed view of the lint screen which should be removed and clean after each load of laundry.

Product description

Power is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. We use the transformative power of light to make gardening more efficient and productive. In addition to HPS/MH and Ceramic MH technology, we offer digital ballasts, fluorescent, and LED lighting systems. From hobbyist to commercial applications, we offer a broad spectrum of gardening tools and equipment in hydroponics, irrigation, climate control, and structures to help your garden thrive. Power Ventilation Ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations. Benefits of power Ducting: This 4-inch ducting fits any standard 4-inch inline fan. 3-layer thickness: Aluminum Foil + PET + Aluminum Foil. Helically shaped and internally crimped galvanized steel strip. Interlocking steel strips to form an air tight and leak proof system. Each ducting unit includes a pair of metal clamps made from stainless steel. This air duct is easy to cut using a pair of metal snips or a standard wire cutter. This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc. This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces. Typical applications for ventilation ducting include: Dryer room vents, A/C or Heater ducting, grow room ventilation and other indoor gardening applications. 12-month manufacturer.

• Ducting size: 4 inches (diameter) x 8 feet (length) when fully extended
• Thermal endurance: Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃)
• Wide applications: Kitchens, bathrooms, greenhouses, grow rooms, grow tents, etc.
• Easy installation: 2 pairs of 4 inch metal clamps made from stainless steel. Flexible length for exhaust fan blower/inline fan
• Fire proof coating: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance

User questions & answers

Question:	Does this fit any dryer
Answer:	No it does not. I went to Walmart and picked up a few.
Question:	Can I Recycle This
Answer:	Yes, I am currently using it for an outlet on my dryer.
Question:	My dryer is sticking out more than the washer. They told me to get a different vent duct so I’m able to push the dryer back some. Is this it
Answer:	Yes. It should then use venture ductwork tape, clamp or large duct zip tie to make a tight secure seal.
Question:	Will this fit in a 4" port on a Milliard 36 x 36 73 grow tent
Answer:	No. I wouldn’t use this. Higher temperature applications require a different flex usually all aluminum for dryer venting because of the moisture levels being exhausted.

Product features

iPower Non-Insulated Flex Air Aluminum Ducting for HVAC Ventilation

Flexible Length

Flexible length for exhaust fan blower / inline fan; quick and easy to set up.

Durability

Built-in steel wire for reinforcement and long lasting performance.

3-Layer Thickness

Flame-retardant coating. Temperature endurance range from 0 ~ 185°F (-18℃ ~ 85℃).