10 best gable roof vents

Product description

Package Including:

1pc DC 12In Solar Attic Fan

1pc 50W Solar Panel

1pc 16 feet solar cable



Powerful Attic Exhaust Fan

Size: 12" x 12" x 3"

10 Blades, 12 Volts

Powerful DC Motor

Quietly Cools Your House Ventilates Your House, Garage or attic



50W Solar Panel

Related Power: 50W

Max power voltage (Vpm): 18V

Working current (Iop): 2.78A



NOTE



All items will come with 2 packages.

• 【Compact and Powerful】 - The fan turns on as soon as the sunlight hits the solar panel and turns off at night. Keeps the house cool and ventilated with fresh air circulation all day. The dimension of the fan is 12" x 12" x 3" design produces maximum airflow.
• 【Summer Cooling】 - The powerful attic exhaust fan pulls heat from your attic, Gabel vent, garage and structure of your home Provide a more comfortable interior Lower air conditioning energy bills.
• 【Winter Protection】 - This 50W solar ventilation fan kit safeguard your attic, Gabel vent, greenhouse, garage from winter damage by equalizing attic and exterior temperatures.
• 【 Cost-Saving 】- The solar fan system cools your roof and also reduces the load on your air conditioning system, it will cut your cooling costs with 0 electric power expense.
• 【NOTE】 - This system include a 16ft solar cable, you can use it to connect the solar panel and the fan.

User questions & answers

Question:	What wiring do I need to connect the fan to the solar panel
Answer:	Sorry I don’t know but they are made well, look nice and I would buy them again.

• 6.6"w X 6.6"h is the size for the duct opening measurement Only, Actual front end outer dimensions id 7.87" width X 7.87" height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
• Weather and Pest Proof: These Louvers are especially designed to allow passage of air into your home while stop water from entering, and with a built-in back 3/16” mesh they also protect you from annoying rodents like mice, rats, birds, and squirrels.
• High Quality Aluminum: The premium durable aluminum will never rust and it will never wear through leaving the material with an elegant, beautiful, and smooth surface, adds a luxurious touch to any home. Louvers are built to withstand hurricanes, tornados and tropical storm conditions.
• Rigid Built For External Use: The sturdy and rigid design features noise free components that eliminates vibration and excess noise to the Louvers. These are built Heavy Duty for installation into brick and cement walls. Can be used to ventilate the crawlspace to protect your home from foundational water leak damage and moisture.
• 100% Satisfaction Service: Click Add to Cart now and enjoy a new updated refreshing look to your home. If any questions, please feel free to contact us. we will reply in 24 hours.

User questions & answers

Question:	Are vent adjustable
Answer:	never tried it for hot food. i use them for desserts. they are a good size and durable. it may just work for hot food once its not microwaved.

Product features

Why do we choose this Hon&Guan vent cover

Hon&Guan which focuses on the R&D manufacturing of air replacement, fresh air ventilation and ventilation equipment,is a modern high-tech enterprise with main products such as mixed flow inline duct fan, ventilation fan, AC, DC fans and ventilation accessories.

Why do we need the Vent Grille Cover

1. Weather Proof & Pest Proof - Louver are designed to block rain from getting inside - back mesh net against pests entering
2. Never Rust - It will never rust, and will be easy to clean. The rigid Aluminum will keep its shape as in brand new condition.
3. Elegance - Beautifully strutured to add a touch of upper>

High Quality Aluminum

The premium durable aluminum will never rust and it will never wear through leaving the material with an elegant, beautiful, and smooth surface, adds a luxurious touch to any home. Louvers are built to withstand hurricanes, tornados and tropical storm conditions.

Mesh Design

These blinds are specially designed to allow air to enter your house while preventing water from entering. The built-in nets can protect you from rats and birds.

Eliminate Odors

It keeps indoor and outdoor air circulation and you can always enjoy the fresh air. Eliminate odor and promote air circulation

• 【 Decent Warranty for Its Part 】- We always stand behind our products, if the motor of the fan doesn't work, or you find the unit miss some part, such as the screws, please feel free to contact our customer service for help, we will send you replacement parts, thanks.
• 【 Efficient in Low Light Condition 】- The solar attic fan can work automatically at low voltage, the Min Voltage to operate is 4V, so you also get great ventilation even on cloudy days.
• 【 Cost-Saving & ​​​Affordable 】- The solar fan system cools your roof and also reduces the load on your air conditioning system, it will cut your cooling costs with low electric power expense.
• 【 Well-Made Quality 】- The materials of the high volume solar attic ventilator is well built of good quality. The tolerances of the solar vent fan are pretty tight, and it runs reasonably quietly.
• 【 Easy to Install 】- It's a ready-to-use solar fan for home, shed, garage or RV, outdoor, etc. The solar roof vent fan comes with a pre-installed 8-inch solar cable with quick-connector, and the solar panel comes 16 feet solar cable, which lets you to easily install it with the quick-connect wires. It could be installed in the gable vent or anywhere in the attic.

User questions & answers

Question:	What is the warranty
Answer:	warranty for a year for the fan,5 year for the soalar panel, totally take responsible for damage or lost in transit. Any issue will be followed by professional customers service team.
Question:	Has anyone gauge the attic heat tempreture reduction as a result of using this
Answer:	I did not measure the temperature difference, but it did not seem to make a difference. The fan does run quite strong so I suspect that it does pull heat out of the attic (that is, after you reverse the fan in its shroud so that it blows outward). However, I was very disappointed, after the fan motor completely died after two years.
Question:	Can this get wet? Weatherproof
Answer:	I mounted it in the roof gable vent and covered it with the slotted vent cover, so it doesn't get wet unless the rain is horizontal. Anyway, the motor burned out after two years. I don't recommend this product. I'm going to remove it and install a hard-wired electric attic vent fan.
Question:	Can someone recommend a thermostat to install with this fan
Answer:	It does not have a place to plug in for a thermostat. I purchased a thermostat and did not use it. I have installed others that have a place to just plug a thermostat in. I would search for one of those fans.

Product features

Outdoor Activities

Small and light, easy to put the solar fan kit into your bag when you go fishing, climbing, cycling, etc. Plug and play, easy to set up it under the sun light when you feel hot, you will feel cool.

Installed in the Garage

Installed it in garage, then you can get the fresh air and cool the garage. No need to breathe the dull air when you drive into the garage.

Hanging on the Tree

When you work in the farm on a sunny day, you can hand the fan to the tree and there is a 16 feet solar cable, so you don't have to worry about the tree would cover the panel.

Installed in the Attic

Installed the fan in the attic, it will cut your cooling costs with low electric power expense. It's great to breathe the fresh air when you walk into the attic.

High Efficient Poly 30W Solar Panel

• Max Power at STC: 30W
• Max power voltage (Vpm): 16V
• Short circuit current (Isc): 1.83A
• Max power current (Ipm): 1.67A
• Open size: 27.8*13.8*0.7in (707x350x18mm)
• Folding size: 13.8*13.8*1.5in (350x350x38mm)

• Manufactured in North America. Heavy Duty Polypropylene Construction. 10 Year Warranty
• The front face is removable, making it easy to install siding up to 5/8" thick. To remove face, place thumbs at top corners of back flange then holding index and middle fingers 2 inch lower against front face to push the 2 parts apart.
• UV Protected with the colour all the way through. Non-Paintable. Do not paint. Maintenance free.
• Built in screen/mesh
• Fully functional allowing proper air-flow. Rough opening is 10" x 16", Finished with vent cover is 12 x 18

User questions & answers

Question:	what is the airflow
Answer:	good
Question:	what is the rough opening required
Answer:	The rough opening should be 10.5 x 16.5, please let us know if there are any other questions
Question:	does it prevent rain from coming in
Answer:	mine does
Question:	Can this be surface mounted onto existing siding
Answer:	No

Product description

The Cool Attic standard-duty Attic Exhaust Ventilator offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic, help prevent weather-induced home deterioration, and make living areas more comfortable - all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof. U.S.A. Fan Diameter in. 14, Air Delivery CFM 1,300, Needs to be Hardwired Yes, Speeds qty. 1, Volts 120, Amps 2.6, Dimensions L x H in. 15 x 15, Depth in. 7. Galvanized steel construction Suitable for 1850 sq. ft. attic Includes 10 Amp adjustable thermostat Requires minimum 600 sq. in. net free air intake vent area Easy installation behind static gable louvers sold separately

Keep your attic cool and ventilated with the power gable ventilator fan. It cools attics up to 1,850 square feet using a 14-inch fan with a 1300 CFM rating. The fan has an adjustable automatic thermostat and prolongs the life of composite roof shingles with lower summer attic temperatures.

From the Manufacturer

The Ventamatic CX1500 power gable ventilator fan is a 1,300 CFM power attic roof-mount ventilator with a 2.6-amp motor and steel flange. It has an adjustable automatic thermostat. It works best for attics up to 1,850 square feet. It prolongs the life of composite roof shingles with lower summer attic temperatures. Ventamatic has provided the ventilation industry with an air of excellence for over 60 years. The factory is 100 percent powered by wind generated power, 95 percent of all waste products are recycled, and the packaging is recycled cardboard.

• Galvanized steel construction
• Suitable for 1850 sq. ft. attic
• Includes 10 Amp adjustable thermostat
• Requires minimum 600 sq. in net free air intake vent area
• Easy installation behind static gable louvers (sold separately)

User questions & answers

Question:	do you have to oil it
Answer:	Oiling the motor once or twice a year will extend the life of the motor. If the motor requires oiling, oil ports or openings will be located on both motor end plates. Use a SAE 20 non-detergent motor oil.
Question:	Has anyone retrofitted one of these to a roof vent
Answer:	I did one in a gable vent, it comes with nice instructions. I mounted it on a piece of plywood then mounted two 2x4s to the gable vent framing then mounted the plywood to the 2x4. It was easy, my 12 yr old son and I did it in 30 minutes. It was summer time in the attic so we wanted to do it fast. I bought a cheap extension and cut off one end and wired it to the leads then ran it to an outlet in the attic.
Question:	How long is the thermostat wiring. How far will it reach away from the fan
Answer:	Wiring on the fan thermostat is very short about 12" or so. I rewired it and moved the thermostat to a location about 25 feet away. This allows me to set the thermostat without having to crawl down the entire length of the attic.
Question:	The 2500 cfm fan uses less power than the 1500 cfm? and haf of the 1600 cfm? Am I missing something here
Answer:	I had to find this out myself straight from the manufacturer, https://bvc.com/skin/frontend/base/default/salessheets/gable_ss.pdf. CX2500 (1650 CFM) · 3 Amp Energy Efficient PSC Motor • ventilates a 2500 sq ft attic CX1600 (1600 CFM) · 4.5 Amp Motor • ventilates a 2400 sq ft attic CX1500 (1300 CFM) · 2.6 Amp Motor • ventilates a 1850 sq ft attic

Product features

Gable Mount Power Attic Ventilators

Ventamatic Standard Galvanized Gable Mount Attic Vent - 1300 CFM (cubic feet per minute) standard gable mount attic exhaust ventilator. Galvanized steel construction.

Suitable for 1850 sq ft (square foot) attic. 2.6A (ampere) thermally protected motor. Includes 10A adjustable thermostat. 14" fan blade. Engineered mounting system virtually eliminates vibration and ensures quiet operation.

Cool Attic CX1500UPS Power Gable Ventilator Fan

Precision balanced fan blades for minimum vibration and no heat distortion. 4 fan blades for greater air movement.

This fan requires minimum 600 sq in (square inch) net free area intake vent area. Completely pre-assembled for easy installation, no special tools required. Easy installation behind static gable louvers or model.

Product description

This product ventilates up to 2300 sq. ft. and has a 5-year limited labor warranty. It is convenient to use and works effectively. It is durable and long lasting as well. It is definitely a great quality product.

• Item Weight: 11.0 lb
• Country of Origin: United States
• Brand name: Air Vent
• Item Dimensions: 7.5"L x 18.25"W x 18.25"H

User questions & answers

Question:	Can I adjust the temp on the thermostat
Answer:	120 vac via 12 gauge wire. I did put it a on switch for the power in a the closet with the attic access door.
Question:	What Warranty comes with it
Answer:	Hello....yes it came with mounting screws and washers. It is very quiet and I couldn't be happier with this purchase. You will love it!
Question:	Does it come with both thermastat and humidistat
Answer:	The motor is rated at 3.7 amps.
Question:	Can the fan be reversed so it sucks air into the house instead of blowing it out
Answer:	the inside diameter of the fan housing is right around 14 1/4" and the outside diameter is right around 17 1/4" hope that helps
Question:	How is it wired
Answer:	5.2"
Question:	does it come with mounting screws and washers
Answer:	120
Question:	What is the current draw of the motor (in Amos please
Answer:	Fins are stay OPEN when it's moving both ways, either air in or out. switcher change the way blades moving each clicks.
Question:	what is the diameter of the fan
Answer:	I use this exhaust fan for 300 Sq. Ft. room and it works great. As far how many Cubic Ft. it's designed for, I would recommend you direct the question directly to the manufacturer. But, if this helps at all, I tried a conversion calculator and found it to be about just over 11 Cubic Feet. Hope this helps. Otherwise, contact the manufacturer for more accurate answer(s).

• ( High efficancy fan blade ) New 14” Fan Housing with 10” High Efficiency fan blade. Enough to open louver. Easy to install with quick-connect wires. Reversible push and pull fan.
• ( Numerous Applications ) For gable vent, greenhouse, garage, shed, cabin or RV. Includes 15’ of extra wire and brackets.
• ( High Torque Motor ) Features sealed ball bearing and Thermal protected fan motor with fully balanced high efficiency fan blades for low noise level and long life. Covers areas up to 2250 Sq. Ft.
• ( Free Thermostat upon request ) This thermostat is made in USA by Selco one of the best companies in the world for making thermostat.. We also offer instructions and connectors with the thermostat so it can be easily installed.
• ( Industry’s best warranty ) Amtrak Solar products such as fan motor, solar panel, fan blades are high quality so we offer 25 year warranty for its products which is the best warranty in the business.

User questions & answers

Question:	How do i get the free thermostat
Answer:	What? There’s a free thermostat?
Question:	do you have to fill the gap when installing fan in gable vent? video showed using cardboard to fill gap at top
Answer:	Yes, I had to build a frame to hold mine exactly in the center where I wanted it. I cut plywood to nail and fill gaps to prevent pollen and debris from flying in through the sides since it only runs on full sun. One cloud and it turns off!😕 I will eventually switch it to the other side of attic to just circulate the air. Will replace it with a fan that runs 24/7 to prevent pollen and dust coming into attic.
Question:	can it be used in a greenhouse
Answer:	I'm using it in a solar wood kiln, I'm assuming that the conditions are similar enough to say yes. Had a sunny but frigid day with a high of 5 degrees, the fan worked fine. The temperature inside the kiln in summer reached above 110 degrees, it still worked well. Humidity and temperature don't seem to affect the performance of the fan whatsoever.
Question:	Our cottage's roof faces east in the am and west in the pm. so my question is can we install a panel on each side of the peak
Answer:	Yes you can

Product features

Amtrak Solar's Powerful 50-Watt Galvanized Steel Solar Attic Fan Quietly Cools your House Ventilates your house, garage or RV and protects against moisture

Amtrak Solar Attic Ventilator comes with 50 Watt High-Quality Crystalline Solar Panel and High Volume Fan. It could be Installed in the gable vent or anywhere in the attic. This is a 12 volt DC fan configured to work with the solar panel with High Efficiency Fan Blade.

Z Brackets to Install the Solar Panel

We include 4 Z Brackets to install solar panel in every kit along with the nuts and bolts and the solar panel are predrilled so it makes easy to install the solar panel.

50 Watt Solar Panel

For any solar fan to perform well it would need power from the solar panel. Amtrak Solar 50 watt solar panel with pre drilled holes along with the Z brackets for easy installation.

New Upgrade 14 inch Fan Housing and Larger fan blade!

We recently upgraded our fan to 14 inch housing and much larger fan blade! We also install High Efficiency Fan Blade manufactured by Revor a leading fan blade manufacture in United States.

Fan installed behind the Gable Vent Removes Heat from the Attic

If you ever go in the attic in the summer time you will realize that the temperature in the attic could exceed 160 degrees. Heat that is trapped in the attic directly effects your air conditioning and your electric bills. Solution is simple. Solar attic fan! It provides free solar energy to keep your house cool and attic ventilated. Also save money on electric bill by reducing the need to run air conditioning!

Product description

1650 CFM (cubic feet per minute) superior energy efficient gable mount attic exhaust ventilator. Galvanized steel construction. Suitable for 2500 sq. ft. (square foot) attic. 2. 1A (ampere) energy efficient thermally protected PSC (Permanent Split Capacitor) motor. Includes 10A adjustable thermostat. 14" fan blade. Engineered mounting system virtually eliminates vibration and ensures quiet operation. Precision balanced fan blades for minimum vibration and no heat distortion. 4 fan blades for greater air movement. This fan requires minimum 600 sq. in (square inch) net free area intake vent area. Completely pre-assembled for easy installation, no special tools required. Easy installation behind static gable louvers or the model No. CX2121-Automatic Gable Shutter. Lifetime limited on all parts.

From the Manufacturer

This Cool Attic Gable Mount Power Attic Ventilator is rated at 1650 CFM with an Energy Efficient 2.1 amp 115 volt 60 Hz PSC Motor. The housing is galvanized steel. It has an automatic adjustable thermostat. It works best for attics up to 2,500 square feet. It prolongs the life of composite roof shingles with lower summer attic temperatures. Ventamatic has provided the ventilation industry with an air of excellence for over 60 years. The factory is 100 percent powered by wind generated power, 95 percent of all waste products are recycled and the packaging is recycled cardboard.

• 1650 Cfm (Cubic Feet Per Minute) Superior Energy Efficient Gable Mount Attic Exhaust Ventilator
• Voltage:110 V

User questions & answers

Question:	Can I wire an extension cord to it with these specs, 125 volts / 10 Amp power with a max of 300 volts
Answer:	Yes! I actually use an extension cord to the nearest outlet about six feet. Also added switches as there are two fans together so I can run one or both. Also use the thermostat controlled switches.
Question:	Thermostat continues to stick 'on or off', unless i 'tap' the thermostat, regardless of the setting. can i get just a replacement thermostat
Answer:	I have had several brands and none of the thermostats work well, alway hang up or will not come on. I turn mine on in April and off November, and don't have to keep check on it.
Question:	I installed as per directions and wiring diagram but the unit is blowing air instead of drawing. Complete reversal of what it should be doing
Answer:	I have installed several exhaust fans and they all work on the same principle, They blow the air outward drawing the air in through the soffet or other vents. The first question to answer is, are we talking about "blowing" in the same sense. Since this is a single phase AC motor, it doesn't matter how the wires are connected. If you want it to blow the air inward, Steve Jobes gave the right answer.
Question:	Can I install this fan inside my attic on a wall to exhaust the hot air from my office into my attic and push it out the louverd gable back end
Answer:	I may not fully understand your situation, but this fan is quite loud. You would not want it running in your office. Put it on the inside of the louvered gable back end which I take to be some distance from your office.

Product features

1650 CFM / Lifetime Warranty Gable Mount Power Attic Vent

Prolong the life of composition roof shingles with lower summer attic temperatures. Help protect attic insulation against mold and mildew in winter by removing moisture-filled air.

Cool Attic brand power gable vents are among the best in the industry and very easy to install. Every model includes an adjustable thermostat that allows the fan to run only when needed, keeping the attic at a constant temperature. The fan blades are precision balanced at the factory to prevent any rotational distortion, and the motor mounts are engineered for stability and minimum vibration.

Product description

This product ventilates up to 1500 sq. ft. and has a 2-year limited labor . It is convenient to use and works effectively. It is durable and long lasting as well. It is definitely a great quality product.

• Air Vent #53315 Gable Attic Ventilator
• 1050 CFM 1/12 HP, 180W 3. 2 amps
• 14" fan blade
• For 1500 sq. ft. max

User questions & answers

Question:	Does it come in 220 volts 60hz
Answer:	I looked through the Amazon offerings, but I saw no mention of voltage. I'm guessing that another company does make maybe a bigger fan, and I guess that it could run with 220volts. I guess that one might have to do some searching to find that question's answer, but I'm just happy with the 120 volt fan, and it has worked now for a number of years. Should this one fail, I'll buy another one. Good luck in pursuing the answer to your question. keep cool!
Question:	Can a variable speed control be attached instead of a thermostat. What type of electric motor is it? Is it capacitive start
Answer:	I'm not sure of the of the type of motor it is. My motor is still running well, and it runs well with the thermo. I broke the AC to the motor, so that I can shut the fan down for the winter or another type of situation. I would guess that it might be a capacitive start, and over time with a speed control????
Question:	what is it made of? any metal
Answer:	The black rings are plastic. The fan blades and motor are metal.
Question:	Does the unit come with a plug type cord or does it have to be hard wired
Answer:	I hard wired a 14 GA. 3 wire 10'-12' extension cord that I removed the female end from. Works traffic. Shorter the better.

Product description

Suntown 16" Round Functional Gable Vent with Screen - 2 Piece Construction - Paintable



These vents have a modern sleek design and are fully functional allowing air-flow into your attic space. If you do not have an adequate breeze going in and out of your attic, you will end up with an overly hot roof which can cause your shingles to curl prematurely. Without a breeze, it will also contribute to a hot interior.



The first solution to these common problems is to install a gable vent when possible. Our vents have a front face that rotates so it can be removed, making it easy to install. Our rotating design makes it incredible durable in severe weather situations.



You won't have to worry about it blowing off in a heavy wind. Other competing brands have a snap-on face that could potentially fly off in a heavy wind. Ours also comes with a leveling line on the side and a built in screen. Proudly manufactured in Canada.

• Manufactured in Canada. Heavy Duty Polypropylene Construction. 10 Year Warranty
• The front face is removable, making it easy to install siding up to 5/8" thick.
• Paintable. This item must be painted or it will turn yellow in the sun.
• Built in screen/mesh
• Fully functional allowing proper air-flow.

User questions & answers

Question:	Can I install over old ones
Answer:	120 vac via 12 gauge wire. I did put it a on switch for the power in a the closet with the attic access door.
Question:	Can vent be install over vinyl lap siding
Answer:	Hello....yes it came with mounting screws and washers. It is very quiet and I couldn't be happier with this purchase. You will love it!
Question:	Do I need to have access to the attic space from the inside to install this vent, or it is totally install able from the outside of the house
Answer:	The motor is rated at 3.7 amps.
Question:	Can this item be used with a gable fan that moves 2890 cfm? are the vents able to allow that volume to pass unrestricted
Answer:	the inside diameter of the fan housing is right around 14 1/4" and the outside diameter is right around 17 1/4" hope that helps
Question:	How is it wired
Answer:	Hi, No they are not adjustable. But they are very good quality for the money! David
Question:	does it come with mounting screws and washers
Answer:	Since April, We have equipped this fan system with a 16-foot cable. Thank you for your question.
Question:	What is the current draw of the motor (in Amos please
Answer:	Flat bottom. Very easy to tray serve or buffet table the cups.
Question:	what is the diameter of the fan
Answer:	They will definitely work for the fruit, not sure if it will work freezing them in this cup. The cup material is pretty thick so it could work.