14 best vinyl tile cutters

Product description

Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank, Cemplank), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick. Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And smooth Finish. Sturdy High-Quality Steel And Aluminum Construction, Extended Handle For Increased Leverage. Table Miter Gauge For Angled Cuts From 0˚ To 45˚And Includes 13” High Speed Steel Knife

• 13" cutting capacity
• Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank , Cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
• Compact and easy to use; produces clean, precision cuts with no splintering and smooth finish
• Sturdy high-quality steel and aluminum construction
• Extended handle for increased leverage

User questions & answers

Question:	Will this cut 15mm wood floors
Answer:	No. The blade is not strong enough for 3/4” hard wood.
Question:	My vynal laminate flooring is 8mm thick. Will this go through
Answer:	Absolutely. This laminate cutter will have no problem cutting 8mm Vynal. Thanks for the question!
Question:	Anybody try cutting garage floor tiles such as racedeck 12'x12'x.5" or similar? they are pvc
Answer:	We bought this to do Luxury Vinyl tiles they were 7x48" and a 20mil thickness... I know this isnt the same material your using but, this cutter was awesome! Highly recommend it, saved a lot of time being able to keep right next to us.
Question:	Does this work very well? I used to use a miter saw for my floor i put down as i already had it. But was annoying for dusk etc
Answer:	This thing works great on thicker Engineered Vinyl Plank flooring. No mess, does not dull chop saw blade. Most important it’s quiet so you can work at night while kids sleep

Product features

Your Dustless Cutting Solution for Laminate & Fiber Cement

It's light and portable.The Norske siding and laminate cutter weighs only 13 lbs.

Steel and Aluminum Construction

The Norske Siding and Laminate Cutter is constructed from high-quality steel and aluminum

Increased Leverage

Our extended handle increases leverage to reduce effort and improve productivity.

High Speed Steel

- Clean & precise cuts with no splintering and smooth finish.

- Includes 13” high speed steel blade.

- 4000 to 5000 Cuts.

Angled cuts

- Table miter gauge for angled cuts.

- Adjustable from 0˚ to 45˚.

Dustless & Quiet

- Dustless.

- Quiet.

- No Electricity.

Product description

The Roberts 12 inch vinyl tile cutter is perfect for any jobsite, with its convenient carry handle and no electricity required. The hardened steel blade cuts all brands of vinyl tiles and vct, and is equipped with a safety latch to secure the blade shut when not in use. Firm grip provided by the molded handle gives extra comfort when making repetitive cuts.

• Hardend steel blades for accurate cuts
• Convenient carry handle for easy transport
• Locking blade and convenient handle makes transport easy
• Molded handle for extra grip and comfort
• Built in ruler to use as cutting guide

User questions & answers

Question:	Can it cut 36inch long vinyl tile
Answer:	No it can only cut 12 inch tiles. I bought it I thought I could reverse the tile and cut again from the 1st cut turn it around and cut again but it did not work so I only use it when I am involved in 12 inch cuts-Bob

Product description

Whether you are a craftsman, builder, or family DIY enthusiast, using our contour gauge set, you will easily and efficiently solve the measurement problems encountered in installing tiles, pipes, carpets, etc.



This tool can easily copy any shape, including irregular shapes, instant template for marking precise tile cuts, it is perfect for duplicating any shape for transferring to tile and other surfaces easily. The teeth are made of plastic and they will not rust over time. Designed for winding pipes, circular frames, ducts, and many objects. It’s ideal for fitting tiles, laminate, carpet, checking dimensions, molding, etc. This tool is also a useful tool for operations on car bodies.



The contour gauge is made of high-quality ABS plastic, high strength, rustproof and durable material. Easy to use - just simply press the tooth against the object to match the contour and then track the shape needed. You don’t have to put much effort while doing your work if you have a sturdy and perfect contour gauge for your work.



Angle measuring ruler helps you get perfect angles every time for all type of cut for stunning projects. Made of premium ABS plastic, lightweight, durable to withstand any physical impact. Great for brick, stone, wood, tile, laminate flooring, metal, and any other material. It’s an essential tool for any toolbox. Save time, money, and effort. It’s the most versatile tool you can have!



Tape the measure is great for Tailor, Sewing, Handcraft, Body Measurements, and more. This Tape ruler is a great little keep-in-pocket multipurpose measuring tool.



PACKAGE INCLUDE: 2020 Upgraded 10" Widen Contour Gauge, Angle Measuring Ruler, Tape Ruler, Gift- Pencil and Pencil Sharpener.



With our 100% money-back guarantee, if you are dissatisfied with your purchase for any reason, we will happily refund your purchase. Our contour duplications gauge always in stock and ready for immediate shipment.

• EXELLENT MATERIAL QUALITY: This contour duplications gauge is made from high-quality ABS plastic, that is lightweight, rustproof, sturdy, well-built and durable. Won't scratch the original finish of the shape being duplicated, works well in cataloging the traditional wood molding shapes.
• DOUBLE SCALE DESIGN: 10 inch/25 cm shape contour gauge duplicator available in both inch and centimeter scale to meets any of your measurement needs. High definition cutting line is clear and easy to read. Size mark on both sides, No more guessing shapes/angles!
• EXTENSIVE APPLICATION: This contour gauge duplicator fits well to measure many irregular items, winding pipes, auto metal sheet, circular frames, pipes, tile, laminate, wood planking, ducts, flooring, carpet, molding, various contour matching jobs, etc. Duplicate contour gauge could be a useful tool for operations on car bodies, carpentry, and all kinds of modeling.
• HOW TO USE: Press the tooth part of the contour gauge against the irregular shaped object, it will fit the shape of the object nicely, then track the shape you need, and duplicate your woodwork or your tiles to fit in.
• 100% SATISFACTION: We offer fast delivery, high quality products and the best customer service for each client. If you have any problems with our 10-inch plastic contour gauge, contact us, we will respond within 24 hours.

User questions & answers

Question:	Does this have a lock to lock the shape in place
Answer:	It doesn't have a lock but it is pretty tight and hold shape firmly.

Product description

Using scissors to cut through tough stuff like plastic packaging is no fun, especially when you suffer from hands that fatigue quickly. Not only was the ZipSnip Cutting Tool designed to do all the jobs that scissors can’t, but it also makes everyday cutting jobs that much easier. Its self-sharpening blade slices right through cardboard, so it’s an excellent tool for taking out the recyclables. It even glides through rubber and leather, so it’s an indispensable implement for crafting and/or DIY projects. It’s precise, much more so than scissors, and has a lot more power behind it than a utility knife. It’s perfect for opening heavy bags like pet food, seed, or fertilizer without spilling because you don’t need a lot of motion to use it, like with knives and scissors. It has a soft grip, so it’s comfortable to use, and the compact design only weighs 1 pound. The lockout switch prevents accidental starts. And it’ll hold a charge for months, so you can keep it in a kitchen drawer and it’ll be ready to go whenever you need it. A charger is included, so you can refill the 4v battery whenever the on-board charge light lets you know it’s time. And it’s great for outdoor use— keep one in the garage or shed and use it for detailed landscaping. The rake was a handy tool until the leaf blower came along. And scissors were nice before the invention of the ZipSnip. Give your hands a break, get a ZipSnip.

• [STRONGER, BETTER SCISSORS] So what is the Zip Snip? They’re Cordless Electric Scissors. They can cut tougher material with far less hand strain than manual scissors
• [BLADE STAYS SHARP] The automatic sharpening system ensures you’ll always have a clean, smooth cut, on cloth, carpet, leather and more
• [HOLDS A CHARGE FOR MONTHS] The 4V MaxLithium battery gives it the spin it needs to slice through materials, and holds that charge for a long time
• [SAFETY FIRST] Both the trigger and the lock-out switch need to be pressed to make the Zip Snip operate, so it’ll only work when you’ve got a firm grasp on things
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [BATTERY INDICATOR] Power level monitor on the Zip Snip lets you make sure that you’ll have enough charge for the job at hand
• [ONLY 1 LBS] Not only can you work a long time without fatigue, but the Zip Snip is easy to maneuver
• [COMES WITH CHARGER] The battery is internal, so you just connect the included charger when you need to top it up

User questions & answers

Question:	Can these be used for cutting light fabrics
Answer:	Yes, I am a designer and I use it to cut fabrics. I was able to cut through 18 layers of cotton yesterday
Question:	Will it cut though plastic laminate
Answer:	It should cut thin laminate. Laminate is quite brittle and can tend to split if not help securely from vibrating. This cutter has a horizontal ledge below the cutter blade, very awkward and if the item you are cutting is not on that ledge, it jams. Using a sabre saw with a fine blade may be easier and more accurate. I would return this Worx cutter if I could, it's not worth the money. I've had better and still looking. Today, I used this cutter to cut up a couple of Amazon boxes and put it down and used the good old box knife - zip, done - no jamming.
Question:	would it cut 1/16 or 1/8 plexglass and are they clean cuts
Answer:	No. To cut plexglass, you need to score it with a sharp knife, elevate the piece and snap the plexglass. Hold half of it with the left hand and push down with the right hand - something like cutting glass
Question:	Will it cut corragated cardboard
Answer:	That's what's it's best at. We have to trim delivery boxes to fit the recyle bin and this cuts through them like a hot knife through butter. No cords in the way, no batteries to buy. Just recharge over night and your good to go. I don't have to worry about slicing a finger off or sharpening old blades. I bought an extra blade to use when the other needs sharpening but so far It's still cutting like a champ with the original. Paper by it's nature is abrasive and this product lives up to it's hype and then some. I cut up boxes all week and I'm really glad I purchased it. Fairly light weight, fits the hand very well and holds a charge along time. What's not to like? I'm almost 70 and my hands get sore fast with a regular boxcutter so I love mine!

Product features

Safety Switch

You need to press down the lockdown switch with your thumb as you squeeze the trigger to operate the ZipSnip. This prevents accidental operation.

Holds a Charge For Months

You can keep it a drawer and know it’ll be ready to go whenever you need it for months between charges.

Battery Indicator

So you know how much battery is left before you need to recharge.

Self-Sharpening Blade

Slice through carpet and other craft projects with ease and precision each and every time.

So Many Uses

The ZipSnip cuts through paper, plastic packaging, cloth, cardboard, leather, canvas, carpet, wallpaper, wire net, flower stem and much more. It makes short work of any of those materials, up to ¼” thick.

The Perfect Gift

Everyone uses scissors, but some of us, especially as we get older, lose strength in our hands. For everyday tasks like breaking down boxes and opening plastic packaging, the ZipSnip is a welcome tool in any home.

Product description

Description:

This is our brand new and high quality laminate flooring cutter, which have comfort grip handle. Easily cut laminate up to 8" or 12'' wide and 0.5" thick. Because of the heavy metal steel frame, it is not only quick and convenient to cut, but also hard to turn over. It also has a movable V support, which can be used to keep the board level and cut at the same time. Don’t hesitate to put them in your cart!



Features:

Brand new and high quality

Easily cut laminate up to 8" or 12'' wide and 0.5" thick

Comfort grip handle

Movable V support for stability

Simple and efficient single stage design

Heavy steel frame

Easy to use

Simple installation is required



Specifications:

Color: Orange

Material: Steel

Max cutting length: 12”

Max cutting depth: 0.5”

Product dimensions:31”L×11.5”W

Package includes:

1×flooring cutter

1 ×V-support

• 【Heavy Metal Steel Frame】The laminate flooring cutter is made of heavy metal steel, it is sturdy and durable to use for a long-term. It is not only compact and easy to use, but also hard to turn over.
• 【Ergonomics Design】The laminate flooring handle cutter has a comfort grip handle. It minimizes user fatigue. This not only ensures comfort when you use it, but also guarantees safety for you. The extended handle increases leverage Also, you can use it effortlessly.
• 【Movable V Support】The cutter has a movable V support, which can be used to keep the board level and cut at the same time. In addition, it can be stored in cabinet or drawer without taking up too much space.
• 【Suitable for Four Cuts】The cutter can easily cut laminate up to 8" or 12'' wide and 0.5" thick. It is suitable for four types of cuts, which includes L cut, lengthwise cut, free angle cut and of course straight cut.
• 【Easy installation and Maintenance】The package comes with a brief and clear instruction, you can finish the assembly in a few steps without anyone's help. What's more, a smooth surface makes it easier to clean and maintain.

User questions & answers

Question:	La cuchilla viene afilada
Answer:	No
Question:	Is there any way to sharpen this
Answer:	Well iam a Floorcovering guy for over 30 years what I did i used a hand grinder with a stone wheel and sharpen it works.
Question:	Does it cut hardie siding
Answer:	I have know idea

Product description

Brand Introduction



STICKGOO Tiles is a smart & unique tile designed by Canadians. Different from traditional tiles, these Peel & Stick Tile make from soft vinyl (exterior film) and natural plant fiber (interior film), waterproof and fireproof. Installation is simple, use a ruler & utility knife can easily cut it to fit the size of your wall, then follow the steps to apply them. No special tools required, no mess and no grouts, easy do it by yourself! Utilize STICKGOO tiles for your next Home DIY project - the design opportunities are only limited by your imagination!!

• ✿ 1.4 Times Coverage Area: 10 sheets thickened self-adhesive tiles, 12" X 12" each (The small piece is 3.3" X 1.8"), which covers 40% more area than 10"x10" tile
• 🌹 2-3 Times Thickness: Much thicker than ordinary peel & stick tile, 2mm-2.5mm each, durable and solid tile, unlike soft sticker tiles
• ❁ Stronger Upgrade Adhesive: 3X Stronger backing glue than ordinary vinyl backsplash tile, not only stick firmly to the smooth & clean surface, but also available on lightly textured wall
• ❃ Waterproof & Heat Resistant: Widely used in kitchen island walls, bathroom backsplash, shower, fireplace, and installed behind the stove
• ❀ Easy Do It Yourself: Just peel, interlock and stick. No need to overlap, no grout and no mess, save your time and money on labor

User questions & answers

Question:	Can this be used on a fireplace and will it stick to existing ceramic tiles that are lightly textured
Answer:	It can be used on a fireplace. Usually they will stick to the ceramic tiles. You can order a sample for test first.
Question:	Are there any trim pieces like 1/4 rounds etc. ? Or are they needed
Answer:	There are no trim pieces included, and it would all depend on your particular situation.
Question:	Can this be placed over a wallpaper
Answer:	It SHOULD adhere to any clean surface. If the wallpaper is secure to the wall (no bumps or air pockets) and can be cleaned well...it should work. If the wallpaper is actually paper and the surface is rough, might not work well.
Question:	what is the difference between white and milk white? Thanks in advance
Answer:	Milk white is less bright white.... but never the less white

Product features

The Best Choice For Remodeling Kitchen & Bathroom

STICKGOO is a leading & professional brand specializing in 3D-gel tile. We have a dedicated design team and a factory with advanced production technology. We are committed to providing customers with a variety of high-quality and cost-effective products. The products you receive are shipped directly from the factory, saving you the agio earned by dealers.

How to Install

NOTE:

• Please consider 3-5% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.
• Use a level or chalk line to create at least one vertical and one horizontal reference lines to guide tile placement.
• Reinforce with a laminated roller after installation.
• Recommend to use tile trim and caulk (or glass glue) if contact with water.
• The new painting walls need to dry for 3 weeks, make sure the wall is completely dry and dust-free.
• For rough surfaces and heavily textured walls, please follow the instructions:

1. Sand the surface with sanding paper or spackling paste
2. Clean the wall with a damp cloth
3. Wait until the wall is totally dry
4. Spray the adhesive more on the joint area on both wall and tiles

Product description

Description

This 24-inch professional manual tile cutter is specially designed for cutting most types of ceramic tiles. Dual solid rails and carriage system with bearing make the service life of the product longer and the cutting work more smoothly. Titanium plated tungsten carbide cutter wheel is durable and achieves smooth cutting , with a flexible breaker that can handle the thickness of tiles from 0.2’’ to 0.47’’(5MM-12MM). The wide metal base, antiskid rubber pads and movable support feet provide extra stability for cutting large tiles, and the ergonomic handle also allows you to save effort. Don't hesitate to buy one!

Note: When cutting, do not cut back and forth to avoid uneven lines.



Features

High strength special solid slide rails for long term use

Special bearing block cut parts for more accurate

Titanium-plated tungsten carbide cutter wheel for smooth cutting

Flexible breaker handles the thickness of tiles from 0.2’’ to 0.47’’ (5MM-12MM)

Cuts porcelain and ceramic tile up to 24-Inch (length) and 16-Inch diagonally

Ergonomic handle for added comfort and energy saving

Non-slip rubber pads and movable support feet for extra stability

Heavy duty iron frame not easy to turn over

Dual solid tracks, improve stability

Removable scale with 0-60 degree rotation design for accurate cutting

Four corners with plastic cover can be used to stabilize products (Two extra plastic covers for each set)

No assembly required and easy to operate

7/8'' replaceable cutter wheel



Specification

Color: as the picture shown

Material: Iron, plastic and tungsten carbide

Overall size: 31.5''x 7.5''x5.5''-12'' (LxWxH)

Size of measuring scale: 12.5''x10''

Cutting thickness: 0.2’’ -0.47’’ (5MM-12MM)

Cutting length: 24’’

Net weight: 19.5lbs

Package includes:

1x Tile Cutter, 1x Scale, 1 x Manual

• 【Smooth & Accurate Cutting】Replaceable 7/8-inch titanium-plated tungsten carbide cutting wheel makes cutting smooth and durable. It is equipped with a carriage system with bearing to assure perfect sliding. In addition, it includes a removable scale that allows parallel and angled cuts (0°-60°) for precision cutting.
• 【Ergonomic Design】This tile cutter is ergonomically designed. The curved handle design makes it easier to press the tile, while the non-slip plastic grip increases the comfort of the cutting process. Wide and thick base, antiskid rubber pads and movable support feet provide additional stability for larger tiles.
• 【Heavy Duty Iron Frame】The frame of this cutting machine is made from heavy iron material, which is strong and durable. This gives the structure needed stability and sturdiness, guaranteeing that it will not easily turn over. In addition, two solid rails are strong and not easy to bend, making cutting work more accurate and suitable for long-term use.
• 【Suitable for All Kinds of Tiles】The manual tile cutter cuts ceramic tiles up to 24-inch (length) and 16-inch diagonally. The cutting thickness of this professional tile cutter is from 0.2'' to 0.47'' (5mm-12mm). Ideal for professional installers and those who are looking for a versatile tile cutter for the most demanding house jobs.
• 【No Assembly Required】This ceramic tile cutting machine does not need to be assembled. It includes a measuring scale and If necessary, you only need to install the scale. And the installation is very simple, just by following the installation steps even beginners can do it with ease.

User questions & answers

Question:	can this cut straight, square exposed edges
Answer:	I'm not sure that I understand the question but my edges were straight enough for my skill level. I used a tile file to get as close to manufactured finish on exposed edges.
Question:	Are you able to cut 24 x 48 inch tile
Answer:	Yes, remove the guide and your ready to go
Question:	Can this be used to cut 1/2" thick acoustic ceiling tiles
Answer:	No
Question:	Will this cut 24" x 24" thick vinyl flooring
Answer:	It doesn’t cut vinyl just tile

Product description

The MAGNUM Soft Flooring Shear is a versatile, heavy-duty cutter for soft flooring products up to 26 in. wide and 1 in. thick. This cutter is precision designed to handle 18 in. squares at a diagonal. Quickly cut luxury vinyl tile, carpet tile, resilient, cork, and rubber tile, and more for your soft flooring installation projects. We're proud to make our MAGNUM shears right here in the USA, and offer a five year warranty.

• Cut a square factory-clean edge on carpet, vinyl, and rubber tile
• Fast – self-measuring wall gauge caster system
• Accurate – Cut within 1/16 inch, with built-in ruler and adjustable fence for 45° (up to 18 in. wide) and 90° cuts
• Factory-backed 5-Year Bulletproof Warranty
• Made in the USA

User questions & answers

Question:	Does it come with a case
Answer:	Mine did not come with a case
Question:	Does it come with a replacement blade? How long does the blade last
Answer:	No. It doesn’t come with extra blade. The blade last long if you are cutting carpet only.
Question:	We've had this cutter for about 7 months and the blade is super dull. Can we buy a replacement
Answer:	You can buy one from bullet tools. You should have gotten a product guide with your Cutter.
Question:	Will this cut plastic tiles
Answer:	You need to give more info then that. Like thickness and what type of tiles. It cuts vct,duraceramic,lvp, and Cortec easily

Product description

Laminate cutter; Laminate flooring cutter, vinyl plank cutter (Only for SPC), cutting 210 mm (8-1/3 inch) flooring by one chop.cutting 300 mm (12 inch) flooring by two chop. Cut quick and easy! Suitable for Width of Plank :210, 300 (mm) .Great for cutting Laminate up to 8-Inch & 12-inch wide and 11mm thick.

• Great for cutting Laminate 8-Inch & 12-Inch wide and 5 -11mm thick floor.
• The laminate flooring cutter is made of heavy metal steel, it is sturdy and durable to use for a long-term. It is not only compact and easy to use, but also hard to turn over.
• 760mm/30-inch handle, can reduce the burden and improve the power arm!
• he cutter has a movable V support, which can be used to keep the board level and cut at the same time.
• The package comes with a brief and clear instruction, you can finish the assembly in a few steps without anyone's help. What's more, a smooth surface makes it easier to clean and maintain.

User questions & answers

Question:	This will cut 12mm Width laminate
Answer:	Dear, It can cut 12 mm laminate. best regards, Selina
Question:	Will this cut 6mm 7" waterproof laminate flooring
Answer:	Dear， Can cut 6 mm 7 inch laminate flooring.Very easy. The maximum cutting thickness of this product is 6 mm, and the maximum cutting width is 210, 300 (mm) / 8,12 (inch). No problem, please rest assured to buy. THANKS Best regards Selina
Question:	Can this be used for resilient plank flooring
Answer:	Yes
Question:	Can you use thius cutter for cutting vinyl plank flooring
Answer:	Yes I did and it was wonderful

Product features

LV-210 Cutter laminate floor

Description: This is our brand new and high quality laminate flooring cutter, which have comfort grip handle. Easily cut laminate up to 8" or 12'' wide and 0.5" thick. Because of the heavy metal steel frame, it is not only quick and convenient to cut, but also hard to turn over. It also has a movable V support, which can be used to keep the board level and cut at the same time. Don’t hesitate to put them in your cart! Features: Brand new and high quality Easily cut laminate up to 8" or 12'' wide and 0.5" thick Comfort grip handle Movable V support for stability Simple and efficient single stage design Heavy steel frame Easy to use Simple installation is required.It can also make "L" Cutting, free angle cuts and lengthwise cuts(For Solft vinyl floor).

Specification：

• Cutter laminate floor,LVT/VCT/LVP/PVC/SPC/WPC/ Vinyl Plank.
• Width of Plank Cutting:210, 300 (mm) / 8,12 (inch).
• It can also make "L" Cutting, free angle cuts and lengthwise cuts(For Soft vinyl floor).
• The cutter has a movable V support, which can be used to keep the board level and cut at the same time.
• No dust, No noise, No electricity needed, Easy and Professional , Save time，Much safer than a saw blade.

Product information：

• Part Number： LV-210
• Item Dimensions：29.3 x 3.1 x 4.3 inches
• Item Weight：11 pounds

EY-210 Cutter laminate floor

Description:Laminate cutter; Laminate flooring cutter, vinyl plank cutter, cutting 210 mm (8-1/3 inch) flooring by one chop.cutting 300 mm (12 inch) flooring by two chop. Cut quick and easy! Suitable for Width of Plank :210, 300 (mm) .Great for cutting Laminate up to 8-Inch & 12-inch wide and 11mm thick.

Specification：

• Great for cutting Laminate 8-Inch & 12-Inch wide and 5 -11mm thick floor.
• The laminate flooring cutter is made of heavy metal steel, it is sturdy and durable to use for a long-term. It is not only compact and easy to use, but also hard to turn over.
• 760mm/30-inch handle, can reduce the burden and improve the power arm!
• he cutter has a movable V support, which can be used to keep the board level and cut at the same time.
• The package comes with a brief and clear instruction, you can finish the assembly in a few steps without anyone's help. What's more, a smooth surface makes it easier to clean and maintain.

Product information：

• Part Number： EY-210
• Item Dimensions：29.2 x 4.1 x 3 inches
• Item Weight：9.4 pounds

Product description

Over more than six decades, Bon has grown to be a global leader in the manufacture of professional construction tools for the trowel trades. With a firm commitment to provide the best value and to maintain the highest standards of workmanship and customer care, Bon remains a trusted source in the industry.

• The largest selection of tools manufactured to the highest quality standards
• Leader in professional contruction tools
• Innovative, durable

User questions & answers

Question:	Do you know where i can purchase the replacement knob for bon 14-558 12-inch professional vct asphalt and vinyl tile cutter
Answer:	I am sorry, but we do not have replacement parts for this item. Perhaps you can find something suitable at any large hardware store.
Question:	Would this work for safety
Answer:	In order to help you need to be more specific in your question. It is a tile cutter and proper safety measures should always be taken. Safety glasses should always be worn.

Product description

The ROBERTS 30002 Vinyl Tile Cutter features a hardened-steel blade to cleanly and smoothly cut vinyl tiles up to 12 in. x 12 in. Ball bearings at stress points provide a precise cutting action, and the built-in measuring gauge ensures accuracy.

• Cuts vinyl tile up to 12" x 12"
• Ball bearing at stress points
• Ball and needle bearings for long life and precise operation
• Built-in measuring gauge
• Hardened steel blades

User questions & answers

Question:	how well does this tool work on vinyl plank flooring
Answer:	I used this on EZ Click Vinyl plank flooring - It’s actually what I bought it for. As long as you put some speed and strength into dropping the blade, it cuts very cleanly.
Question:	How precise is it? Can it cut as thin as 1/16th of an inch? I'm trying to fill gaps
Answer:	It depends on the thickness and type. I tried it with 1/8” 100% vinyl (not like the Armstong vct that is super brittle). It bent it more than cut it. Horrible product, made it thru 4 cuts before breaking and not a one was square. Better off using an L Square and carbide faced razor knife
Question:	can this cut thru 5 mm vinyl
Answer:	My husband was trying to cut some thin vinyl self stick tile. The blade broke after using it a few tiles in. I would suggest spending the mo eye on something better. It was a complete waste of money in my opinion and my husband ended up having to use a box cutter to do the entire floor which took forever.
Question:	Can you use this to cut peel and stick planks
Answer:	No this item is garbage

Product description

The QEP model 10630Q 24-Inch (630mm) Manual Tile Cutter is designed for both ceramic and porcelain tile. The simple score and snap process is a quick way to rip and diagonally cut tiles. The dual, chrome-plated rugged steel rails and linear ball bearing slides are designed for smooth scoring on large tiles. The wide aluminum alloy base, heavy duty rubber pads and cutting table extensions provide extra stability for larger, heavier tiles. The high leverage bicycle grip handle makes cutting easier. Includes a 7/8-Inch titanium-coated tungsten-carbide scoring wheel.

• Rip cuts porcelain and ceramic tile up to 24-Inch and 17.5-Inch diagonally
• Straight edge adjustable measurement guide aligns tile for accurate cutting
• 7/8-Inch titanium-coated tungsten-carbide cutting wheel for smooth and durable scoring
• Easily cleaned with compressed air or soap and water if needed

User questions & answers

Question:	Does this come with a storage case of any sort
Answer:	No storage case. This product was able to cut 24" porcelin tile with ease.
Question:	RE: mesh backed mosaic of quartz stone and glass. can this machine cut the quartz stone which is 1/4" thick x 1 1/4" wide and various lengths. TY
Answer:	No use a grinder with a diamond blade
Question:	does this cut a 24x24 tile
Answer:	Yes, a square straight cut. Does a nice job!
Question:	can it cut glass tile easily? Thanks
Answer:	Yes...I used it when installing my mosaic tile backsplash, it went through the glass like butter

Product features

Instant and Straight Cuts

With the QEP 10630Q 24-Inch Manual Tile Cutter, you will easily be able to cut ceramic and porcelain tiles. It is designed with features and details so that the simple score and snap process is a quick way to rip and diagonally cut tiles.

Heavy-Duty and Smooth Function

This tile cutter from QEP comes with dual, chrome-plated rugged steel rails and linear ball bearing slides that give smooth scoring on large tiles. It also features a wide aluminum alloy base, heavy duty rubber pads and cutting table extensions provide extra stability for larger and heavier tiles and accurate cutting.

Product description

The QEP 14 in. Ceramic and Porcelain Tile Cutter cuts a variety of wall and floor tiles. The solid, chrome-plated steel rails offer smooth scoring, while the welded center breaker beam and level foam side pads provide clean cuts and a level surface. This cutter also includes an adjustable rip guide designed to help make repetitive cuts in tile faster and easier.

• Cuts wall and floor tiles up to 14 in. long, 10 in. diagonally, 1/2 in. thick
• Linear ball bearing slides to provide smooth scoring and repeat cuts
• Heavy duty rubber pads prevent tiles from shifting
• Dual chrome-plated steel rails with bumpers for comfortable scoring
• Rubber padded aluminum alloy breaker bar will not mar tile

User questions & answers

Question:	Will it cut green onyx tiles
Answer:	Probably not, since onyx is a natural stone and lacks internal consistency.
Question:	Can the rig hold subway tiles effectively
Answer:	Yes I did a large subway tile 3*12 and it held them just fine.
Question:	Can it cut glass tiles
Answer:	It actually most likely will. In frame shops they have this exact same thing but a lot larger for the different glass per customer. That it scores the glass and than you add pressure and you have a clean cut. So I would feel comfortable using it for glass tiles.
Question:	Can the be used to cut the peel and stick glass tiles
Answer:	Hi Our 10214Q cutter is designed to be use with veranos tile only Thank you

Product description

13-inch Laminate flooring and siding Cutter with sliding extension table

• 13" Cutting capacity
• Sliding extension table supports longer boards (41" Working length)
• Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank, cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
• 28-1/2" Handle for increased leverage
• Bonus accessory Kit includes pull bar, tapping block, 16 PVC inserts and mallet ($30 value)
• Adjustable measuring gauge for quick repetitive cut
• Laser etched table miter gauge for angled cuts

User questions & answers

Question:	Manufacturer recommends honing the blade after every 40 cuts. Can someone point me to a sharpening stone I can use with blade in place
Answer:	Junk
Question:	Will this tool make rip cuts
Answer:	No
Question:	Will this cut .046 thick Monogram siding, that has a 3/4" profile
Answer:	Box says: vinyl tile up to 19/32, Siding up to 3/8. Cuts fiber cement siding like "HardiePlank"
Question:	Is this good for contour/curved cuts
Answer:	This cutter makes a straight cut with its straight blade. You can make a square or angled straight cut. It does not have the capability to make a contour or curved cut. If you need to make a contour of curved cut, use a scroll saw.

Product features

Your Dustless Cutting Solution for Laminate & Fiber Cement

It's light and portable.The Norske siding and laminate cutter weighs only 13 lbs.

Steel and Aluminum Construction

The Norske Siding and Laminate Cutter is constructed from high-quality steel and aluminum

Increased Leverage

Our extended handle increases leverage to reduce effort and improve productivity.

High Speed Steel

- Clean & precise cuts with no splintering and smooth finish.

- Includes 13” high speed steel blade.

- 4000 to 5000 Cuts.

Angled cuts

- Table miter gauge for angled cuts.

- Adjustable from 0˚ to 45˚.

Dustless & Quiet

- Dustless.

- Quiet.

- No Electricity.