11 best storm doors

• HANDS FREE HOLD OPEN - Simply tap the Touch button to hold the door open at any desired position.
• EASY RELEASE - Just nudge the door farther open. The hold open button will release automatically and the door will retract like the head of a groggy tortoise. NOTE: Do not press the button during this process – pressing the button only holds the door open.
• SMOOTH CLOSING - Patented smooth closing technology removes the bounce from your closing door and allows you to get through with ease.
• SIMPLE REPLACEMENT - For Larson, Andersen, Pella, Unique Home Design, EMCO, and many more.
• FOR USE ON A SINGLE DOOR (only one closer comes with touch button) - Easy to Install for new doors - See our video for the straight forward installation process

User questions & answers

Question:	Does it allow the screen door to open all the way, 90 degrees from the door frame
Answer:	It's a simple physics question really. Any opener would allow this depending on what distance the mounting brackets are attached to the door. If you are reusing existing mounting holes than you run the chance of repeating the same mistake. To allow more angle of opening you need to attach the (screen door side) brackets closer (nearer) to the door pivot side of the door frame. You could actually go beyond 90 degrees but that may be to hard for the closer to overcome especially in wind. We have the pair with the quick release at the bottom (very convenient) on a pretty heavy Larson door and once adjusted works flawlessly. With the closer mounted on the door frame only, extend the tube all the way out (fully) and lock it in pace with the button. Next move the door to the desired (fully open)position, mark the relationship between the door and the bracket, mount it (bracket) a 1/2" closer and you should be good to go.Hope this helps!
Question:	are screws included in the kit
Answer:	Yes, all the hardware needed for mounting (brackets and screws) was included.
Question:	I have the dual closer system on my storm door but only need to replace the bottom one (heavy duty). Is this available separately
Answer:	Hi Betsy, Yes! You can get just the Touch 'n Hold Smooth Single Kit and it will replace that closer. The Dual Kit is actually 2 standard duty closers that work in conjunction as a heavy duty system. So the Single Kit, ASIN B00R3HJ0CC , is an exact replacement for this part.
Question:	Hi, what are the differences between greenstar models r-dsk-1101773 (sold through homedepot) and b-hds-1101503 (sold through amazon
Answer:	Hi Abel. These are the same product. The SKU is listed incorrectly here. We are not sure how the Amazon ASIN got tied to the B-HDS-1101503 SKU but we are looking into it. Thanks for the alert.

Product features

Touch 'n Hold - Single Kit

Touch 'n Hold Smooth - Single Kit - Standard Duty Door Closer for Storm & Screen Doors - New Doors or Replacement for previous units.

Comes in 7 colors:

• White
• Black
• Bronze
• Almond
• Sandstone
• Green
• Cranberry

Touch 'n Hold - Dual Kit

Touch 'n Hold Smooth - Dual Kit - Heavy Duty Door Closer System - For (medium and heavy weight) storm, screen, security doors - New Doors or Replacement for previous units.

Comes in 7 colors:

• White
• Black
• Bronze
• Almond
• Sandstone
• Green
• Cranberry

Touch 'n Hold Smooth Heavy Duty

Touch 'n Hold Smooth Heavy Duty - Door Closer for Storm & Security Doors. - New Doors or Replacement for previous units. Comes in Black ad White.

Touch 'n Hold Inventor

Years ago, the inventor of the Touch ‘n Hold door closer had a little daughter, and although brilliant, she was a little clumsy. She kept on getting her fingers pinched trying to make their old screen door stay open. When this happened, she cried. Not just a little cry. No, this cry involved big, sloppy tears. That old metal washer thingy was just hard to use.

Our inventor also noticed that his very sweet, aging mother had to bend down to fiddle with the washer so that the door would stay open as she did chores around the house. And because she had a bad back and arthritic hands, doing this made her mutter some very un-sweet words. Our inventor did not like to see his daughter cry or his mother grumble in pain. Thus, he used his many years of experience as an aeronautical engineer to invent what some have called, "the world's most convenient door closer." Someone has even called it the, "best invention since sliced bread." Might be a bit of a stretch, but hey, we'll take it.

Testimonial - Ed W., Hoschton, GA

"The door closers were delivered this week. My husband installed them on Saturday. You would crack up if you saw our entire family still hopping and racing over the threshold trying to beat the scary slamming storm door. The habit was ingrained in all of us: hop to it or your heel would be injured, your purse would be snatched, or your back side smacked. We LOVE it! So luxurious. Leisurely walking through our own front door. Well worth the wait for the back order."

Product description

Heavy Duty Storm Door Closer White

From the Manufacturer

Heavy duty pneumatic door closer that is normally used alone on medium or heavy weight storm doors. White painted finish.

Buying Guide

Five Tips for Buying Door Hardware

There’s nothing that enhances style and function quite like new door hardware. It’s the first thing that catches the eye at the front door, and it feels good in hand throughout the home. Here are five tips to simplify the buying process.

What are the different types of door hardware?

Entry hardware installs on exterior doors, and includes knobs or handlesets (handle with deadbolt) that lock with keys or touch pads from the outside and turnbuttons from inside. A deadbolt lock optimizes security.

Privacy hardware is designed for bedrooms and bathrooms, locking with turnbuttons and not requiring keys.

Passage knobs and levers are designed for hallway doors, laundry rooms and closet doors that latch but don’t lock.

Dummy knobs and levers are decorative hardware pieces designed for pantry doors or other doors that only require a pull to open, with no latch or lock.

What safety features are available?

The American National Standards Institute (ANSI) sets different grades for door hardware, such as Grade 1 (basic), Grade 2 (intermediate), and Grade 3 (highest). These days, with more and more intruders using "bump keys"--a key that can open almost any lock--or locksmith tools once intended only to resolve accidental lockouts, many manufacturers offer bump-resistant cylinders.

Will it fit my door?

• Standard doors are either 1-3/8 or 1-3/4 inches thick, with most hardware designed to adjust for either. Extension kits are available for thicker doors.

  View larger

• Most hardware is interchangeable, only requiring that the backset (the distance from the edge of the door to the center of the knob or lock, usually 2-3/8 or 2-3/4 inches) matches the hole(s) in the door so that the latch or bolt throws properly. Some hardware sets adjust for both backset lengths.
• Levers come in both left- and right-handed models. To determine the appropriate handing, look at the door’s hinges from outside the door. If the hinges are on the left, you’ll need a left-handed lever. If the hinges are on the right, you need a right-handed lever.

Can I install it myself?

Most door hardware, including keypads and deadbolts, installs in under an hour with only a Philips screwdriver. Most keypads are powered by batteries, so no wiring is required. Handlesets sometimes require a drill. If the door or doorframe is not predrilled, door hardware usually comes with a paper template to mark holes for drilling and sawing with common spade bits and hole saws. Specialized tool sets also are available for door-hardware installation.

If you want to use one key on multiple entry handles or deadbolts, you will need a locksmith to "re-key" all the locks to the same key. This should be done before installation and only will work if all the hardware comes from the same manufacturer.

What cool hardware features are available nowadays?

Keypad locks and deadbolts let you add and delete numerous user codes as needed, providing family members, neighbors, baby- or pet-sitters with easy-to-remember codes. Cool for parents and great for keeping kids out of cleaning closets and utility rooms, some keypads have auto-lock mechanisms that lock after a few seconds in case you forget.

Once used only for government applications (as depicted in high-tech spy movies), biometric keyless entry systems, which scan dozens of different fingerprints for easy access, also are growing in popularity.

• White in color
• Heavy duty pneumatic storm and screen door closer
• For wood or metal out swing doors
• Full 90 degree opening
• For wood or metal out swinging doors
• Full 90 degree opening
• Adjustable closing speed

User questions & answers

Question:	What is the max door opening angle? Can it open more than 90 degrees
Answer:	The door swings open from the side you install this on. So if the door opens up into the garage you are good putting it on the garage side of the door.
Question:	What is the diameter of the pneumatic tube
Answer:	Yes. a door opener allows for smooth opening a closing to prevent the door from banging. Push or pull to open the door and the door will close by itself. You can adjust the speed of the closer by turning the adjustment screws, you will need an Allen wrench for this.
Question:	Is there a closer like this for an in-swing door
Answer:	Yes, I mounted it on the pull side of the door.
Question:	I have two of these on a heavy Andersen full glass storm door. It slams shut then bounces open and then takes forever to close - anyone have any tips
Answer:	Yes just relocate the arm that connects to the door frame another inch or two away from the hinges . That gives more leverage and makes it easier to open the door.

Product description

If your screen or storm door handle is old, damaged or missing, don’t get a brand-new door – just replace the door handle! The Prime-Line K 5007 Push Button Latch Handle Set makes this DIY project a breeze. Installation is quick and easy, all necessary fasteners are included, and the set is non-handed, allowing it to be used on both left and right-handed out swinging wood or metal screen or storm doors 5/8 to 1-1/4” thick. The sturdy door handle set is constructed of aluminum for durability and has a classic push-button design. It comes finished in black, perfect for a variety of storm or screen doors. The latch set includes one inside latch (1-3/4” hole spacing), one outside handle, one spring-loaded strike (7/8" W x 2-5/8" H with 1-1/8" hole center), fasteners, and comprehensive installation instructions. Prime-Line K 5007 features a night lock which adds a layer of security to your screen or storm door. You can lock the door from the inside, so it cannot be opened from anyone on the outside. The screen and storm door push button latch set is an easy way to extend the life of your door. Instead of spending the money on a costly new door, you can simply replace the handle and move on to your next DIY project.

From the Manufacturer

This push button latch comes finished in black. It is designed for use on out swinging wood or metal screen or storm doors. It fits on doors that are 5/8 to 1-1/4 in. thick and comes complete with a night lock.

• INCLUDES – The sturdy metal construction button handle set includes one inside latch (1-3/4” hole spacing), one outside handle, one spring-loaded strike (7/8" W x 2-5/8" H with 1-1/8" hole center), fasteners, and comprehensive installation instructions. It is designed for use with outswinging wood or metal screen or storm doors 5/8” – 1-1/4” thick.
• REPLACE OLD OR BROKEN DOOR HANDLES – When your screen or storm door handle is broken, don’t replace the door entirely, just get a new door handle set! This classic push button designed latch set is constructed of aluminum for durability with a black plastic button . It has a sleek black finish and includes a night lock for added security.
• EASY INSTALLATION – Installation is quick and easy, providing an economical solution to your broken door handle – that does not include replacing the entire door! The latch set includes mounting hardware as well as simple and clear installation instructions.
• NON-HANDED CONSTRUCTION – The non-handed construction means that you can use this door handle set on both left and right-handed screen and storm doors.
• NIGHT LOCK FOR ADDED SECURITY – The Prime-Line 5007 screen and storm door latch set comes complete with a night lock for added security. Your screen or storm door can be locked from the inside, so it cannot be opened from the outside.

User questions & answers

Question:	what should be the thickness of the door
Answer:	I don't own this, but Amazon lists in 3 different places that it fits doors 5/8 to 1-1/4 in. thick.
Question:	What’s the difference between model 5071 and
Answer:	The difference is in the bottom of handle: 5007 is free hanging while 5071 has a curved end that attaches to door, a tie down
Question:	It says no lock out feature. What ecactly does that mean? Does the door reall lock so that nobody can get in if the door is locked
Answer:	This item has a night lock feature not a no lock out one. The night lock feature allows you to lock the door from the inside, so it cannot be opened from anyone on the outside.
Question:	What is the distance between the two screw shafts
Answer:	1 3/4 inch

Product description

In 2008, Wright Products joined Hampton Products International Corporation, adding to Hampton's portfolio of high quality products that include: residential locksets, lighting, timers, builder's hardware, exterior door hardware, cargo management, winches, electronics and portable security.

Serenade Mortise Latch. Product Number: VMT115. Fits doors 1-1/8" to 2" thick. Includes built in keyed deadbolt. Reversible levers for left and right hinged doors. Matching interior and exterior finishes eliminates the need to match paint colors. Includes adjustable backset for either 3/4" or 1" backsets.

Buying Guide

What are the different types of door hardware?

Entry hardware installs on exterior doors, and includes knobs or handlesets (handle with deadbolt) that lock with keys or touch pads from the outside and turnbuttons from inside. A deadbolt lock optimizes security.

Privacy hardware is designed for bedrooms and bathrooms, locking with turnbuttons and not requiring keys.

Passage knobs and levers are designed for hallway doors, laundry rooms and closet doors that latch but don’t lock.

Dummy knobs and levers are decorative hardware pieces designed for pantry doors or other doors that only require a pull to open, with no latch or lock.

What safety features are available?

The American National Standards Institute (ANSI) sets different grades for door hardware, such as Grade 1 (basic), Grade 2 (intermediate), and Grade 3 (highest). These days, with more and more intruders using "bump keys"--a key that can open almost any lock--or locksmith tools once intended only to resolve accidental lockouts, many manufacturers offer bump-resistant cylinders.

Will it fit my door?

• Standard doors are either 1-3/8 or 1-3/4 inches thick, with most hardware designed to adjust for either. Extension kits are available for thicker doors.

  View larger

• Most hardware is interchangeable, only requiring that the backset (the distance from the edge of the door to the center of the knob or lock, usually 2-3/8 or 2-3/4 inches) matches the hole(s) in the door so that the latch or bolt throws properly. Some hardware sets adjust for both backset lengths.
• Levers come in both left- and right-handed models. To determine the appropriate handing, look at the door’s hinges from outside the door. If the hinges are on the left, you’ll need a left-handed lever. If the hinges are on the right, you need a right-handed lever.

Can I install it myself?

Most door hardware, including keypads and deadbolts, installs in under an hour with only a Philips screwdriver. Most keypads are powered by batteries, so no wiring is required. Handlesets sometimes require a drill. If the door or doorframe is not predrilled, door hardware usually comes with a paper template to mark holes for drilling and sawing with common spade bits and hole saws. Specialized tool sets also are available for door-hardware installation.

If you want to use one key on multiple entry handles or deadbolts, you will need a locksmith to "re-key" all the locks to the same key. This should be done before installation and only will work if all the hardware comes from the same manufacturer.

What cool hardware features are available nowadays?

Keypad locks and deadbolts let you add and delete numerous user codes as needed, providing family members, neighbors, baby- or pet-sitters with easy-to-remember codes. Cool for parents and great for keeping kids out of cleaning closets and utility rooms, some keypads have auto-lock mechanisms that lock after a few seconds in case you forget.

Once used only for government applications (as depicted in high-tech spy movies), biometric keyless entry systems, which scan dozens of different fingerprints for easy access, also are growing in popularity.

• Fits doors 11/8" to 2" thick
• Includes built in keyed deadbolt
• Reversible levers for left and right hinged doors
• Matching interior and exterior finishes eliminates the need to match paint colours
• Includes adjustable back set for either ¾" or 1" back sets
• Fits doors 1-1/8" to 2" thick
• Includes built in keyed deadbolt

User questions & answers

Question:	Are the interior screw holes 7" apart
Answer:	7 1/4" apart
Question:	could I get the dimensions of the lock itself?Just wondering if it will cover where existing lock is mounted.thanks
Answer:	Measurements between mounting screws
Question:	Does anyone know if this lock will fit a Pella door?Thanks
Answer:	I am also looking to fit a Pella Storm door Montgomery. When I called Pella, they told me that I needed a specific type.
Question:	will this fit a larson storm door
Answer:	My Larson storm door was about 14 years when I replaced the door handle mechanism about three years ago.It worked fine for me on my door. Can't say if that success would be universal.

Product description

This chain and spring helps to protect your wood or metal out swinging doors from wind damage. The steel chain installs into your door jamb and features a heavy-gauge spring wire. Adjusts to fit most any door. Comes in a zinc plated finish.

From the Manufacturer

This chain and spring helps to protect your wood or metal out swinging doors from wind damage. The steel chain installs into your door jamb and features a heavy-gauge spring wire. Adjusts to fit most any door. Comes in a zinc plated finish.

• Protects Wood Or Metal Out swinging Doors From Wind Damage
• Heavy Duty Compression Spring
• Durable Zinc Plated Finish
• Adjustable to Fit Most Any Door

User questions & answers

Question:	Will this product work on an aluminum door
Answer:	Yes but I would look at large washers or a metal strap for where it goes through the aluminum to prevent it pulling the screws through the aluminum door when the wind catches it and stresses out the door closer.
Question:	how do I install storm door chain
Answer:	check on line several videos will tell you your distances this is what i ndid
Question:	Will this product work on aluminum doors
Answer:	Yes, it can be mounted to aluminum doors
Question:	Does this contain any lead
Answer:	No.

• HANDS FREE HOLD OPEN - Simply tap the Touch button to hold the door open at any desired position.
• EASY RELEASE - Just nudge the door farther open. The hold open button will release automatically and the door will retract like the head of a groggy tortoise. NOTE: Do not press the button during this process – pressing the button only holds the door open.
• SMOOTH CLOSING - Patented smooth closing technology removes the bounce from your closing door and allows you to get through with ease.
• SIMPLE REPLACEMENT - For Larson, Andersen, Pella, Unique Home Design, EMCO, and many more.
• EASY TO INSTALL for new doors - See our video for the straight forward installation process

User questions & answers

Question:	Does this serve as a storm wind device Prevent the wind from catching the door in swinging wildly open
Answer:	Not as far as I can see. The holding features prevents the door from closing. To unlock it you have only to push it open slightly the force for which a gust of wind would be ample.
Question:	This is for lighter duty, like a screen door versus heavier duty like a glass "screen" door
Answer:	I live in northern Illinois. I use it on my storm door which is a combination of glass and screen. I have had no problems with the door.
Question:	Bought two in 4/20. Both have failed. Remain open abought halfway Please advise
Answer:	Thanks for bringing this to our attention. When they "remain open about halfway" are you able to pull through the sticking point, or are they locked open? Sometimes our closers need to be "recalibrated" when the vacuum in the cylinder is too much for the closer to handle. If they're just sticking, we suggest the following solution: 1) Remove the speed screw from the back of the closer. 2) Open and close the door ~10-15 times to cycle the mechanism. 3) Replace the speed screw to its original position and use normally. If the mechanism seems locked open, please try the following: 1) Remove the closer off the door by pulling out the 2 pins fastening it to the brackets.  2) Take a thin screw driver or use the longer pin to place in the pin hole at the end of the metal rod.  This you will use as a handle (it will make a T-shape).  3) With one hand grab the cylinder and the other hand grab the metal rod.  Pull the two apart slightly and turn the rod 180 degrees (pull and twist at the same time without engaging the button --you may have to pull pretty hard).  The rod should release and the door closer should work fine.  If these solutions don't work for you, let us know so we can troubleshoot further.
Question:	Most closers have a last second release to "slam" the door shut. Does this have the same type of action or close quietly
Answer:	Hi there! Thanks for your question. Our closers do have a 2nd phase for latching the door, but it's adjustable so you can make it louder (slam harder) or softer if you'd like. This can be accomplished by reorienting the bracket on the door. Instructions for doing this are included in the kit.

Product features

Touch 'n Hold - Single Kit

Touch 'n Hold Smooth - Single Kit - Standard Duty Door Closer for Storm & Screen Doors - New Doors or Replacement for previous units.

Comes in 7 colors:

• White
• Black
• Bronze
• Almond
• Sandstone
• Green
• Cranberry

Touch 'n Hold - Dual Kit

Touch 'n Hold Smooth - Dual Kit - Heavy Duty Door Closer System - For (medium and heavy weight) storm, screen, security doors - New Doors or Replacement for previous units.

Comes in 7 colors:

• White
• Black
• Bronze
• Almond
• Sandstone
• Green
• Cranberry

Touch 'n Hold Smooth Heavy Duty

Touch 'n Hold Smooth Heavy Duty - Door Closer for Storm & Security Doors. - New Doors or Replacement for previous units. Comes in Black ad White.

Touch 'n Hold Inventor

Years ago, the inventor of the Touch ‘n Hold door closer had a little daughter, and although brilliant, she was a little clumsy. She kept on getting her fingers pinched trying to make their old screen door stay open. When this happened, she cried. Not just a little cry. No, this cry involved big, sloppy tears. That old metal washer thingy was just hard to use.

Our inventor also noticed that his very sweet, aging mother had to bend down to fiddle with the washer so that the door would stay open as she did chores around the house. And because she had a bad back and arthritic hands, doing this made her mutter some very un-sweet words. Our inventor did not like to see his daughter cry or his mother grumble in pain. Thus, he used his many years of experience as an aeronautical engineer to invent what some have called, "the world's most convenient door closer." Someone has even called it the, "best invention since sliced bread." Might be a bit of a stretch, but hey, we'll take it.

Testimonial - Ed W., Hoschton, GA

"The door closers were delivered this week. My husband installed them on Saturday. You would crack up if you saw our entire family still hopping and racing over the threshold trying to beat the scary slamming storm door. The habit was ingrained in all of us: hop to it or your heel would be injured, your purse would be snatched, or your back side smacked. We LOVE it! So luxurious. Leisurely walking through our own front door. Well worth the wait for the back order."

Product description

Wright Products most popular standard duty closer. This closer can be mounted on all out swinging storm or screen doors either as a single closer for light or medium weight doors or paired with another standard duty closer (one mounted at the top and the other at the bottom of your door) for heavier full view storm doors. This closer has a full 90-degree opening range, is factory lubricated and has an adjustable closing speed. Available in aluminum, white and black finishes.

• Stainless steel lock body for corrosion resistance
• Rubber jacket to protect surfaces from scratching
• For out swinging wood or metal doors
• Two hole end plug for adjustable latching power
• Full 90-degree opening

User questions & answers

Question:	What is the length of the V920 vs. V1020WH
Answer:	The closing side indoors. If subjected to the weather my guess it would rust and fail. Works well.
Question:	Any way to adjust to not be hard opening from about 1/4 open to full open
Answer:	Yes, there is a metal slider that holds the piston in place propping the door open
Question:	what is the length of the cylinder
Answer:	The cylinder is aluminum and the shaft is stainless steel
Question:	what is the difference between the 820 and 920 model
Answer:	I mounted the replacement on the top because my door is heavy as well. It works and provides a smooth transition to closing.

Product features

Wright ProductsV920WH Standard Duty Pneumatic Closer

Wright Products standard-duty white pneumatic (air pressure) door closer is designed for out-swinging light-to-medium weight metal, wood, or vinyl screen and storm doors. The door closer measures 12-5/8 inches long (unextended) and 1-1/4 inches in diamete. Use alone for light and medium weight doors or in pairs for heavier full-view storm doors. Wright Products has been supplying quality screen and storm door hardware for over 60 years.

• ✔ Keeps the Outside Out: This sealing strip can do it all. It’s waterproof, soundproof, and durable. It’ll keep your home clean of dust and water from storms. Need to save some money? The sealing strip will help to insulate your home and reduce electric costs
• ✔ Tough and Durable: The premium silicone is safe, water-resistant, and anti-scratch. It’ll keep the outside out so that you can enjoy the peace and quiet of your home. It can handle any kind of weather or wear that it might face!
• ✔ Fits like a Glove: The luxurious smooth surface and sophisticated white color blends in perfectly with any home design and can seal a gap of up to 28 mm. The tight fit prevents detachment and deformity, even after years of use!
• ✔ Effortless Installation: No tools needed! Simply stick the strip to the bottom of your door and attach the seal strip. It couldn’t be easier. ★ NOTE: Please kindly note the adhesive may damage the door, it's no suggested to tear off the door seal once stickup, or be really careful if have to. ★
• ✔ Waterproof Backing: The Ohuhu Door Seal Strip boasts unmatched water resistance and adhesion. It’ll keep your home nice and dry, even in the worst storms! It’s also great for bathrooms, laundry rooms, and anywhere you might need it.

User questions & answers

Question:	does the order only comes with one or a pair
Answer:	It comes with one.
Question:	Will this transition from hardwood to thin carpet
Answer:	yes
Question:	Hi. Could this work on the top of a door? I have a gap where bugs and a draft are definitely getting in. Would this stop both
Answer:	Absolutely. I have it on the top, bottom, and sides of my door.
Question:	Does this door draft stopper work on blocking light
Answer:	I don't know. Because I used it on my Screen/Security Door. But it is very sturdy, its not flimsy.
Question:	Is it compatible with other brands of storm doors
Answer:	You should prob ably contact the company to be sure, but I would guess that if the size is right, it should work.
Question:	How long is this item? I need a closer that is about 12 inches in length
Answer:	The closer itself (cylinder) is about 12 1/4", but you need a minimum of 12 3/4" to allow for the connectors to attach to the brackets.
Question:	Our current storm door current slams back fast before finally catches with only about 4 inches until closed. Does this one catch sooner than that
Answer:	Good question. Try adjusting the screw at the end of the closer. If that doesn’t work it is time for a new closer. This closer is an exact Andersen/EMCO replacement for closers with two piece door jamb brackets.
Question:	Does this come with installation instructions
Answer:	Good question. There is a general instruction sheet that is included with the package. If you are replacing a closer on your Andersen door this is a one for one replacement. There are specific door instructions originally included with the door. If you need those please forward the door’s serial number found in hinge area to Colden Solutions and we will send a copy to you. Contact us at: https://www.amazon.com/sp?_encoding=UTF8&asin=B005E0N6IY&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&orderID=&seller=A2892VGAW23KLZ&tab=&vasStoreID=

Product features

Ohuhu Door Seal, Energy Efficient Weather Stripping, Under Door Noise Stopper, Soundproofing Door Bottom Seal Strip

Fed up with outdoor loud noise? Tired of dust and bugs infiltrating your home? The Ohuhu Door Seal Strip is the perfect solution.

This tough, water-resistant strip provides extra insulation that keeps the outdoors out. It’s waterproof, soundproof, and extremely durable. You’ll be able to use it for years to come. Better yet, this sealing strip helps to regulate your home’s temperature- you’ll save a fortune on your electric bill! The velcro strip provides easy installation so that you can enjoy a sealed door in no time.

Specification:

• Material: Silicone
• Wight: 8.1oz/230g
• Product Dimension: 39.4 x 2.0 x 0.2 inch / 100 x 5 x 0.5 cm

Three Layers Design

Soundproof floor insulation, reduce the sound more effective, reduce annoying sound up to five times and keep out dust and bug.

Flexible & Durable

Water-proof silica gel material, Extremely flexible with no harm to your floor.

Note: It's suggested to install the door seal on the inside of the door in winter, since it may reduce its service life if frozen with ice.

Self-stick Adhesive Strip

Strong adhesive, non-degumming, stick firmly.

Note: Please DO NOT open and close the door high frequently within 24 hours after installed.

Fit Most of Doors

39.4" length x 2" height x 0.2" width, fits almost average-sized doors. Can be cut to different size according to your need.

Product description

The Ideal SK8730 Heavy Door Closer package includes

• Our well-known and reliable SK1730 pneumatic (air filled) heavy door closer (for heavier storm and screen doors);
• A special wide-base bracket for the door jamb, which allows new holes to be drilled if your existing holes have been damaged or stripped;
• Extra-long screws, for extra strength in holding the door closer in place; and
• Our SK14 wind chain, to protect the door, the glass and the door closer pump from damage if a strong wind catches the door as it is opening.

Additional features

The heavy duty closer features winter and summer settings for when screens are used instead of glass, and features an air by-pass for extra latching power. The closing speed is regulated by an adjustment screw at the end of the tube. Tightening the screw will slow or stop the closing, loosening it will speed up the closing.

Details

The SK8730 door closer is for out-swinging storm and screen doors that are from 1-1/4” to 2” thick. If yours is a lighter-weight door, please consider Ideal’s SK9 Standard Door Closer.



All fasteners and brackets are included for a complete and easy installation. The wide base bracket is available without the door closer as the SK26.



This door closer is original equipment quality. Ideal Security supplies storm door hardware to quality door manufactures across North America.

From the Manufacturer

Storm door heavy duty door closer, wide jamb bracket with chain, white.

• Heavy door closer package for storm and screen doors
• 10.5" tube length, 1.5" tube diameter, no torsion bar
• Package includes SK1730 closer, SK26 wide-base jamb bracket & SK14 wind chain
• For out-swinging doors 1-1/4" - 2" thick
• SK1730 closer features seasonal adjustment, tensioning screw, and air by-pass
• SK26 wide-base jamb bracket with extra-long screws provide added strength and allow for new holes if your old holes are stripped/damaged
• Ideal Security has been providing OEM-quality storm door parts to manufacturers across North America since 1956

User questions & answers

Question:	My door is 43" wide. I need it to open to 90 degrees. Is the arm long enough to allow that swing
Answer:	Yes, the SK1730 would allow you to open the door to 90 degree if you follow the installation instruction to do the installation.
Question:	Does this closer actually put some pressure to keep the door closed
Answer:	Yes, the closer will close the door fast at the end (about 5"). This will overcome pressure resistance created by the prime door and the storm door.
Question:	My current storm door doesn't open wide enough, will this allow the door to open more
Answer:	I would say with the chain you can open the door about 7/10 of the way.
Question:	Does the aluminum closer come with aluminum hardware? How did the closer fare in extreme elements
Answer:	Our storm door closer is designed for storm door applications. They would last for years to come if installed and used in the intended applications. Please contact us if your application is outside the design intent.
Question:	how to install an upper door closer on emco 400 door,with roll-up screen
Answer:	When you get the answer I’ll need to know. My husband attached this and now the screen has a hole throughout and can’t be used when attached. Good luck!
Question:	I opened my storm door and locked the bottom and now can’t get it to release
Answer:	Good question. If the closer is operating correctly just open the door slightly more and the button should release allowing the closer rod to retract and the door to close. If that does not work or the door can not physically open further disconnect the closer from the door jamb and try to pull rod out with locking pliers or ‘Vice Grips’. Otherwise the closer may be defective from wind damage, age or use.
Question:	does this come with the mounting brackets and screws
Answer:	Yes it does, comes with all the hardware needed
Question:	How can the item dimensions (15.75") be longer than the package dimensions
Answer:	I think the item dimensions probably include the bracket, since the bracket is not attached in the package, the package is shorter than the assembled product.

Product features

The complete package

* Our well-known and reliable SK1730 pneumatic (air filled) heavy door closer (for heavier storm and screen doors);

* A special wide-base bracket for the door jamb, which allows new holes to be drilled if your existing holes have been damaged or stripped;

* Extra-long screws, for extra strength in holding the door closer in place; and

* Our SK14 wind chain, to protect the door, the glass and the door closer pump from damage if a strong wind catches the door as it is opening.

Additional Features

The heavy duty closer features winter and summer settings for when screens are used instead of glass, and features an air by-pass for extra latching power. The closing speed is regulated by an adjustment screw at the end of the tube. Tightening the screw will slow or stop the closing, loosening it will speed up the closing.

Product description

This is a classic looking storm or screen door handle that be used on aluminum, vinyl or wood storm and screen doors.

From the Manufacturer

Black keyed push button handle set for storm and screen doors.

• Key Lock Push button handle set
• For out-swinging storm and screen doors
• For doors 1 in. to 2 in. thick
• Screw posts 1.75 in. center to center
• Quick and easy installation

User questions & answers

Question:	What model lock cylinder is this? The cylinder you actually put the key in
Answer:	It's our own key cylinder. It isn't compatible with the main door key cylinders.
Question:	How do you lock/unlock the door from inside the house? Is it located on top or along the side
Answer:	The inside latch of the SK312 has a slider that can lock / unlock the latch from inside. When inside, you do not use the key to lock / unlock.
Question:	How can I get another set of keys for my door
Answer:	Locksmith or most big chain hardware stores should be able to cut additional keys for you.
Question:	Is it possible to have 3 sets made that use the same key? I have 3 storm doors
Answer:	No, not for this model. You can order keyed alike cylinders from us for model SK1215, SKGLK, and HK01-I. Send us an email, we will send you detail instructions.

Product features

Classic simplicity

Our VP Push Button Handle Sets offer a simple upgrade replacement for your basic storm door handle.

The familiar push-button motion with just a touch of style, at a price that can't be beat. Choose from black or white, with a key-lock or without.

And whichever you choose, know that we stand behind 60 years of storm door hardware experience, offering products of the highest quality and unquestionable customer service.

Metal Push-Button

Our handles are made with all metal components, including the button itself.

Metal buttons last longer and function smoother than other brands' plastic buttons.

High-end Inside Latch

Our competitors skimp on the inside latch with old models that don't work well or cheap components that break.

We include the same high quality WC Latch that we include with our most luxurious handle sets.

Solid Nylon Strike

The SK2 Door Strike included in this set is made from a single piece of solid nylon, built to last.

Using this type of strike is only possible because we've included our WC Inside Latch.

Other brands offer cheap latches with spring-loaded strikes that are known to break.

Product description

Heavy-duty storm door with reversible handing. Constructed of 1-inch thick wood core with maintenance-free vinyl surface. Self storing window and screen to allow for bottom ventilation. Includes durable weather-strip, black adjustable speed closer, durable black push-button handle with inside security lock, and color matched expander to conform to uneven sill for a tight fit. 5-year . White. Standard door height 80 inches to 81 inches.

• Constructed with a solid wood core
• Conforms to uneven sills
• Available in white
• Heavy-Duty Storm Door With Reversible Handing

User questions & answers

Question:	Can I put a cat sized pet door in this particular storm door
Answer:	I'm sure that you could as there is enough room at the bottom of the door. However, I've never had to install a pet door, so I'm no expert. The door is constructed of a piece of plywood clad with 2 thin sheets of aluminum, so I would think that installing the pet door would be easy.
Question:	Why is the glass blue in the picture
Answer:	Because it looks cool? Honestly I don't know. Call it artistic license. The glass in my door is clear.
Question:	Whats the length of this door
Answer:	79 1/2 inches plus weather stripping
Question:	is hardware included? latch and hinges
Answer:	My door never arrived, it was damaged in route and the company did not want to ship a replacement. Very dissatisfied.
Question:	Does this part fit most storm doors
Answer:	Good question. Yes, it can be used for most storm doors as it is a great quality storm door closer. The locations of the brackets may change slightly.
Question:	Can I use this to replace the lower closer without taking the old brackets off? The screws on old brackets won't move
Answer:	Good question. You should be able to swap closers no problem using existing brackets. Andersen has not changed the design recently. If you do need to remove screws ask a friend to loan you an impact driver cordless drill... They work great on those tough screws. Contact me for any other questions: https://www.amazon.com/sp?_encoding=UTF8&asin=B06XB3YKYS&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&orderID=&seller=A2892VGAW23KLZ&tab=home&vasStoreID=
Question:	Can this be mounted on outside of a wood screen door that opens toward inside patio
Answer:	has to be mounted on the inside of the door to pull the door closed. buy one at big box store. much cheaper
Question:	I have a pella storm door and this is the closest I could find to match - has anyone used this closer on a pella storm door
Answer:	Not sure. I have only used this on an Andersen door.