13 best garage wall covering

• √ Best Protection by DOUBLE Thickness - 1/4" thickness surface provides heavy protection for your car door and garage wall to prevent damage caused by any heavy impacts. It is greater or equal to twice the thickness of other brand of garage wall protectors.
• √ Top Grade & Eco-Friendly Material - The protectors with scratch prevention diamond texture on the waterproof surface are made of odorless high-density material, which has RoHS authentication. It is totally environment-friendly material. Let us go Green!!
• √ Full Protection & Suitable for Types of Walls - Scratch prevention soft foam strip for garages. Each strip size is 79"x 8"x 1/4". And also the strip can be cut into multi pieces or different shapes, which fits for any types of walls.
• √ Exquisite Surface Design - Details make all the difference. This garage car door protector has been applied with the most exquisite design in the world. Any water drop or water flushing be protected by special textures and grooves. It is also very easy to be cleaned.
• √ Double Protection by Dual Strip Pack - A set of two garage wall strip ensures both sides of car doors and garage walls will be fully protected.

User questions & answers

Question:	Will this stick to lightly textured plasters wall or do I need to sand the wall
Answer:	Our wall protector can be applied on any concrete, ceramic, sheetrock, metal and most of wall surface which is flat, clean and dry enough. The protector might not able to stick very well if it cannot touch to the whole surface.
Question:	Can the product be cut and used to wrap a garage pole
Answer:	Yes. This EVA wall protector is very flexible to wrap around a garage pole. And it can be easily cut into pieces with a knife or scissors.
Question:	side door sill scuff plate for opelmeriva
Answer:	The total length of Ampulla garage wall protector is 79". We have done a test on SUV Audi Q5 which has a total length of 182.6", it is long enough to protect both of the side doors. And the total length of Opel Meriva 2017 is approximately 159.4", which is smaller than the SUV size we tested. Ampulla garage wall protector should be long enough for Opel Meriva 2017 if the protectors are put on a proper position on the wall.
Question:	Can this be used as a chair rail in the home
Answer:	Hi. Thank you for having an interest in our wall protector. It could be used on the chair rail. However, the way of wrapping it on the chair rail might affect the adhesiveness. Therefore, we are unable to 100% sure it is applicable.

Product features

Ampulla Garage Wall Protector

Ampulla Garage Wall Protector's Features:

• Best Protection – 1/4 inch(6.5mm) thickness resists any moderate-heavy collisions;
• Strong Adhesive - Reinforced by fiber mesh design and strong adhesive surface;
• Dual Strips - Provides fully protection for all the side doors of most of sedan & SUV;
• Water Resistance - Unique design texture and special surface treatment gives a great water resistance
• Exquisite Texture - Let the protectors designed in Germany become decoration and add more stylish to your home.
• Anti-Scratch - Special textural surface can minimize the scratch marks on the protectors and keep it clean and tidy.

Package Included:

2 x Garage wall protector (79"x 8"x 1/4" or 2000x200x6.5mm)

(Two pieces in One Pack)

Little Details Make All the Difference.

Instruction:

1. Please clean and dry the wall surface and remove any particles on it;
2. Peel approximate 4” (10cm) adhesive cover from one side and apply the protector on the wall
3. Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.
4. Repeat the same steps above for the other side of your garage wall.

Notice before use:

• Please do not put under extremely high temperature or exposure to the sun for long;
• Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;
• Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care, because the adhesive is very strong.

• 🚲【OPTIMIZED DESIGN &STRONG CARRYING CAP ACITY】 ：New welding technology design, is more stable Garage hook will not fall off,Covering with the sturdy PVC anti-slip coating to protect your item from scratches and slip.Made of thick steel steel garage hooks are heavy duty and sturdy.Never have to worry about your garage or garden tools falling off again!
• 🚲【A SET OF 12 HEAVY-DUTY GARAGE HOOKS】:We offer 4 varying sizes of garage hooks for varying usage: Different size for different objects and weights. Meet your needs for storage tools!
• 🚲【EASY TO INSTALL】:The hooks come with screws and wall plugs, for use on wooden, brick or concrete walls or variety of wall surfaces and the package set includes an installation manual with screws
• 🚲【MEET THE VARIOUS NEEDS OF GARAGE STORAGE】：12 pack Garage hooks was designed for multiuse,it creates an efficient storage space for your garage, garden, shop, basement or warehouse. you're free to keep your specific tools in place where you like, to free up space in your garage
• 🚲【Zozen PROMISE】: Zozen adheres to the belief of customer first and product quality first. We have high-standard factories, professional designers and workers. At the same time, we have a professional Amazon operation team. If you have any questions about the product, please contact us as soon as possible. We will give you the most satisfactory answer as soon as possible. Your satisfaction is our greatest support.

Product features

ORGANIZING YOUR GARAGE SPACE !!!

Note: Please choose according to the size and weight of the items to hang.

2x Large Square Hooks (6.37"x7.28"x2.75")

2x Medium Square Hooks (5.11"x4.92"x2.48")

3x Small Square Hooks (4.84"x2.75"x2.44")

2x Medium J Hooks (5.5"x3.9"x1.4")

3x Small J Hooks (4.3"x2.7"x1.4")

24 x Pcs steel screw nails

24 x Pcs black wide thread screw plugs

24 x Pcs white plastic anchors

1 x User manual

1 x Box

• Large Wall Coverage - 20 Pieces of 3D brick wallpaper stickers are good enough to cover about 80 square feet wall. We will send you an extra few pieces for free if you needed more.
• Easy to Re-size and Install on wall - You can easily cut the 3D wall stickers with our free trimmingkit to fit your corners or outlets. Peel and stick the adhesive 3D brick wallpaper to apply them on your wall.
• Real Brick Effect and Texture - After you finish your installation, you can see the white bricks as real as the ones made by concrete. The texture of the 3D brick wallpaper is 1/4 inches thick with soft foam material.
• Re-Printable to Any Color - If you want to turn your 3D brick wallpaper to your favorite color, you can buy some prints from the Home Depot and start your printing project.
• No Damage to Wall for Removal - You can easily remove the 3D brick wallpaper from your wall without causing damages by slowly removing the 3d wall stickers a few inches at a time.

User questions & answers

Question:	Can you put these on basement (cement) walls? Will they stick and hold
Answer:	maybe best to attach these tiles/bricks onto thick cardboard first and then NAIL that cardboard onto the cement wall with "cement nails". Or, maybe, attach cardboard to cement walls FIRST, and THEN attach the tiles to the cardboard.
Question:	Can I use this on my wood fireplace
Answer:	Yes you can, but peel and stick mosiac times will look better for fireplace. See link. https://www.amazon.com/Crystiles-Self-Adhesive-Backsplash-Turquoise-91010841/dp/B01DR07JAI/ref=mp_s_a_1_4?ie=UTF8&qid=1534543607&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=peel+and+stick+tile+backsplash+blue+and+green&dpPl=1&dpID=61ScqFll%2B9L&ref=plSrch
Question:	Can it be removed easily
Answer:	i am renting, and i am buying thick cardboard, or poster boards, or flattened boxes, and I will apply or glue these sound proof tiles on to the thick cardboard, and then, I will get very long nails and nail this to the wall. I have not yet decided, if i will nail right THROUGH these white foam tiles? or----------- just nail the cardboard to wall, and later glue the white foam tiles onto the cardboard...? And then, when i move from this rental, it will all come down and off by removing the nails. I might even be able to take it all with me to next apt!? haha. And all I will have to repair on old wall when i move ?--------will be several nail holes to fill in, but no glue to remove.
Question:	Is it easy to paint on
Answer:	It's paintable, but I don't recommend it. I tried it on one before applying to the wall. The paint chips was coming off... Good luck

Product features

The Best Value and Looking of 20 PCS 3D Brick Wallpaper You Ever Get on the Market - Total Coverage 80 Square Feet, 4 Square Fee per PCS

These 3D brick wallpaper panels are different from any other flat 3D wallpaper stickers. The 3D brick wallpaper panels have the real white bricks visual effect and texture. They are not just flat 3D wallpaper. Instead, these 3D brick wallpaper stickers are 1/2 inches thick. Each piece can cover 4 square feet are for your wall. With total of 20 pcs of 3D brick wallpaper, you can cover about 80 square feet area.

If you have an electric wall outlet, you can re-size the 3D wallpaper to fit your wall outlet. It's very easy to cut the size you need. In addition, our 3D wallpaper stickers are printable, so you can feel free to decoration your 3D white brick wall with any colors combination.

Product Specifications:

• Quantity: 20 Pieces 3D brick wallpaper peel and stick;
• Color: White Bricks
• Size: 4 square feet/pieces, total coverage about 80 square feet; 1/2 inches thickness
• Printable: Yes
• Material: PE Foam
• Ideal Place to Apply 3D Wallpaper: bathroom, kitchen, living Room, dining room, bedroom

Bring them home today and start your wall decoration. These 3D wallpaper will save your time, and they look like real white bricks.

• Size: 5ft(width) x 7ft(height)
• Material: Microfiber(thick soft fabric), non-glare, light-proof, washable and ironing
• Feature: Pattern clear and true(thermal transfer technology), durable, with top pocket(tube easy to pass through)
• Purpose: Perfect for professional photography, family photography, party decoration
• Service: Customized made(size or pattern), fast shipping, fast message reply, simple return and exchange Policy

User questions & answers

Question:	Can this be hung horizontally
Answer:	I'm not sure what you mean? I hang it from the top just like you see it in the pictures. Only I use clamps to secure it to the bar.

Product features

Product Features：

1. Compared with other materials, microfiber is soft, seamless, non-reflective and Light-proof.
2. Thermal-transfer printing, the printed patterns are rich in layers, colorful, and ever-changing, with small color difference and good reproducibility.
3. It can be washed and ironed by dryer without worrying about cleaning.
4. Reusable and durable.
5. Seamless, we make sure the integrity of products.
6. With rod pocket and full stitched edges.

Pregnancy Photograph

Model Photograph

Family Photograph

Baby Photograph

Full stitched edges can prevent tears.

Steam iron can iron the surface of backdrop.

Rod pocket helps backdrop to be draped or hung.

• NO MORE STRESS IN YOUR GARAGE – the sound of the door of your beloved car hitting the wall is the worst nightmare of any car owner. Fast Mile garage wall protectors will save your car from scratches, dings and eventual rust, helping your kids, pets and yourself to exit and enter the car more easily.
• EXTRA THICK FOR HEAVY IMPACTS – our car door protectors are 7/9" thick and can continuously withstand the hardest hits without any damage. Made of eco-friendly EVA material, they are completely odourless, waterproof and resistant to surface scratches. The measurements of one piece are 15.7" x 4.7".
• RELIABLE HEAVY DUTY ADHESIVE – perfect for all flat surfaces of wood, cement, stone, plaster, metal or plastic. It’s super easy to use - just peel off the paper backing and stick the protective strip where you need it. You can easily cut it to necessary shape or combine multiple strips together for a larger safety area.
• 5 PROTECTORS FOR THE PRICE OF 4 – get an extra piece to protect your bumper or tailgate. Stick it on your back wall and park with ease every time. And don’t worry if you ever want to remove or replace it – the self-adhesive film is reinforced with fiberglass so it peels off without leaving any glue marks.
• FAST MILE QUALITY GUARANTEE – we are here to help you keep your car looking brand new! If for any reason you are not satisfied with our product, just return it back anytime and we will give you a full refund. No questions asked.

User questions & answers

Question:	can these be used outdoors
Answer:	not sure. I have used them only inside of my garage. My garage is not heated so it does get cold in there during the winter months and so far they have been fine.

Product features

No more stress in the garage

• With Fast Mile garage wall protectors, you won’t have to longer worry about accidentally damaging the paint of your car. Confidently open the doors wide when you have to pick up the child seat or those heavy shopping bags after a long tiring day!

• We also included an additional fifth strip for those with a low ceiling or in need of a parking aid on the rear wall.

Effortless installation and removal

• It’s as easy as it sounds – just peel off the paper backing and stick the foam strips on any clean and flat surface of wood, concrete, stone, plaster, metal or plastic. No need to mess with long rolls, hand-cutting the right size strips or drilling.

• We recommend parking your car in the garage or carport and opening all doors to accurately mark the places where the protection is needed. You can easily combine several strips or multiple sets for a larger protected area!

Reliable and long-lasting protection

• Fast Mile garage wall guard strips are 7/9" thick – more than three timesthe usual foam that comes in rolls. They also have a textured surface that is more resistant to scratches than the cheaper rubber and does not split or crack from impacts or bending.
• Fast Mile garage wall protectors are backed with a fiberglass-reinforced adhesive layer. It is waterproof and will stay where you put it for years to come. And do not worry if you ever need to remove it – just slowly peel it off without any damage!

• Great Protection & Impact Absorption – Each strip size is 16" x 6" x 7/9". The 7/9" thick foam can perfectly absorb any impact up to 330lb or 150kg, preventing damage from any potential impacts when parking in the garage.
• Top Grade & Eco-Friendly Material - The protectors with scratch prevention diamond texture on the waterproof surface are made of odorless and high-density EVA material, which has RoHS authentication. It is totally environment-friendly material. Let us go Green!!
• Cuttable & Flexible – Each strip can be cut into multi pieces or different shapes. Perfect flexibility and softness provided by its just right thickness allow the wall protectors to be applied on 90-degree wall, curved surface or cylinder column.
• Fiberglass Mesh Adhesive Structure – The adhesive force is reinforced by its unique integrated back adhesive structure. The interlaced fiberglass allows the wall protectors to be removed without tearing the soft protector or leaving marks on the wall. The non-tearing self-adhesive cover can be peeled off easily.
• What you will get – Garage Smith GWP02S Car Door Protector x4, 1-day response customer service and technical support.

User questions & answers

Question:	Will the protector fold around a 90 degree corner? The description says this is possible, but I only see images of the product on flat surfaces
Answer:	Yes, the garage wall protector folds around a 90-degree corner and it can still play a protective role, but it's not recommended to do so. Because the garage wall protector it's a pretty thick piece of hard foam, so we recommend that you use it on the flat surfaces garage wall for the best effect.
Question:	Will this stick to wood walls
Answer:	Yes, the adhesive force is reinforced by its unique integrated back adhesive structure, protectors can be removed without leaving marks on most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care because the adhesive is very strong.
Question:	Thinking about using these for the wall where i hang my guitar. So i dont bump and scratch my guitar. Will they damage my guitar? Stick to them
Answer:	These bumper pads should not scratch your guitar. I've only used them as advertised, which is on the garage wall for the door to hit when opened. But the material does not have the kind of texture or feel that suggests it would stick to a varnished surface, especially if you use the instrument, rather than leaving it against the surface permanently. Definitely worth a try for your intended purpose.
Question:	Will these stick on brick
Answer:	Our wall protector can be applied on any concrete, ceramic, sheetrock, metal and most of the wall surface which is flat, clean and dry enough. The adhesiveness might not able to reach the highest level if applying on brick.

Product features

Garage Smith GWP02S Garage Wall Protector's Features:

Heavy Protection - The 3/4” (20mm) thickness buffer layer absorb any impact up to 330lb or 150kg;

Strong Adhesive & Reliable Retention - Reinforced by fiberglass mesh design and strong adhesive surface;

Non-tearing Adhesive Cover – Unique plastic-coated cover paper can be peeled off easily without tearing;

Waterproof Material - Great waterproof material provided by the special surface treatment;

Diamond Texture Design - The special textural surface can minimize the marks that scratches left on the surface.

Packaged Included:

4 x GWP02S Garage Wall Protector (15-3/4” x 6” x 3/4” or 400mm x 150mm x 20mm)

Little Details Make All the Difference.

Instruction:

1. Please clean and dry the wall surface and remove any particles on it;

2. Peel approximate 4” or 10cm adhesive cover from one side and apply the protector on the wall.

3. Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.

4. Repeat the same steps above for the other side of your garage wall.

Notice before use:

· Please do not put under extremely high temperature or exposure to the sun for long;

· Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;

· Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care because the adhesive is very strong.

• 🚗 Feature: The car door protector strips can against fire and water, it is resistant to abrasion, oil, and superior heat preservation, effectively guard your car against bumps and scratches damaging your vehicle's door, bumper, bodywork, and other places.
• 🚙 Ultra Thickness: Compare to other brand product, our protector strips is 1.18-inch thickness, the service life of up to 5 years, can be better to provide full protection for your car, prevent damage caused by any moderate impacts.
• 🚚 Premium Quality: Made of Eco-friendly high-quality EVA Foam with strong adhesion tape backing, durable and easy to clean, easier installation on almost all smooth surfaces including plaster, wood, metal, concrete, etc.
• 🔨 Easy Installation: Just need to peel off the backing paper and stick it on the wall, 4 pcs guard strips are better for left and right side of the car, guard your car against bumps and scratches, it is suitable for DIY to multi shapes or size.
• 🏡 Widely Use: This garage wall anti-scratch strip is perfectly used in parking spaces, warehouse, mechanical insulation, pipe insulation, vehicle collision avoidance. And removed without tearing the soft protector or leaving marks on the wall.

User questions & answers

Question:	Can I use it for a kayak cushion
Answer:	It will definitely “cushion” a kayak, but what matters more is the surface you want to stick the bumper to. I have it suck to my garage wall (unpainted cinder block). I wasn’t concerned about leaving a mark on the wall. Overall, the bumpers are very dense (good thing) and do their job well.
Question:	Is this weather-resistant? I need to mount it on a narrow exterior wall leading into a garage
Answer:	I've had mine on an outdoors low brick wall in my carport since June 2019. They have held up beautifully. Still sticking firmly and looks nice. I've just ordered a second set to finish lining the wall.
Question:	I have a potential use in the house. If they are mounted in a small to medium size room is there a noticeable odor
Answer:	I haven’t noticed any odor. I have them in our garage so certainly no issue there. But when opening the package, there isn’t any overwhelming smell.
Question:	What can be used to cut it to a customized shape or size? A box cutter
Answer:	You may use a box cutter or strong scissors .

Product features

Reinforced Adhesive

Easily install on almost all smooth surfaces including plaster, wood, metal, concrete, etc.

Excellent Multilayer Protection

Guard your car against paintwork damage when your car getting in and out of the garage.

Cuttable & Flexible

Each strip can be cut into multi pieces or different shapes.

Usage Tips :

1. Please clean your garage wall surface firstly and ensure it is smoooth, non-dust, dry, remove any particles on it.
2. Measure the size and mark the places you want to put it on.
3. Peel off the backing paper and apply the protector on the wall, make sure it is straight and no space between it.
4. Repeat the same steps above for the other side of your garage wall.
5. Be careful, the garage wall protector could not adjust after start to adhere to the wall.

Warm Tips :

1. Please do not put under extremely high temperature or exposure to the sun for long;
2. Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;
3. Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care because the adhesive is very strong.

• 【Creative Brick Wall Design】HD printing technology features vibrant colors and clear image. No Fading, No dyes harming health of your family.The overall color scheme makes the room more stylish.
• 【Soft Comfortable Material】Super Comfortable Hand Feel Touch, Durable, Light Weight easy to Handle, smooth, comfortable,skin-friendly, durable, fast drying and non-fading. Best for your home decoration
• 【Easy Use & Easy Care】This tapestry contains 6-10 nails for easy hanging, push pins, thumbtacks, command strip. Machine wash or hand wash, you can also easily iron it on low temperature. Bleach is not allowed
• 【Different Sizes & Multipurpose】different sizes for your choosing. Great for wall hangings, dorm decor, photography backdrop, beach throws, porch hangings, table cloths, bed spreads, or sofa covers. A perfect Gift for any Occasion!
• 【Occasions & Excellent Service】Home bedroom, living room, sofa background,college dorm decor, beach blanket and outside picnic. Please select the right size for your needs. Anything if you dislike, just return it and you will get refund

User questions & answers

Question:	Is the color as the picture shows
Answer:	Hi, yes, the color is as the picture shows.
Question:	Is the color as the picture shows
Answer:	Yes

Product features

PROCIDA Tapestry Wall Hanging - Loam Brick Wall

Your tapestry is not only the necessity for room,it is the biggest decorative element in your room.This brick wall tapestry can be used as a great background, which can give you a beautiful brick wall look.Tapestry makes the whole room more retro and atmospheric.PROCIDA tapestry, make your room a great wonderful and impressive memory! Take actions to get it, bring more happiness for your family and friends!

Soft & Light Weight Fabric

• Fabric With Peach Finish, Super Comfortable Hand Feel Touch
• Durable, Light Weight easy to Handle

High Definition & No-Fading

• High Definition Digital Print Technology
• No-Fading after Hand Wash or soft Machine Wash.

Well Workmanship & Easy Handle

• Hand-Sewn Edges
• Contains 6-10 non-trace nails for easy hanging

Diann K Eick: Privacy Panel Perfect

This was the perfect pattern to use as a privacy panel on my apartment deck.

Tomás Pulido: Excelente

Excelente! Se ve muy bien, buen producto y puntual entrega

Bre: Love it

Love it

• Unique and One of a kind Home Wall Sticker Design - by BestDealDepot
• Very High Quality Vinyl - 7+ year exterior life!
• Very easy to apply, remove or reposition - Just PEEL & STICK!
• You can put it by yourself indoors or outdoors: walls, doors, widows or any flat and dry surface!
• Won't leave a mark on your wall like other cheap sticker, no residue!

User questions & answers

Question:	Is this 100” in height and 144” long ways
Answer:	Yes, the 144” width would be all 6 panels laid out side by side. They number the panels for you so you know which pattern to match up. Measure your wall to see if 100” height will work. It was too short for my walls. I had to blend in a small panel at the bottom about 5” wide
Question:	Would a new roll of 100x144 match the end of another one? I have installed on already but I need to finish the rest of the wall
Answer:	YES! I bought two last year and had to move on into the 2nd roll! It's fine!
Question:	In case of purchasing several units of the brick wall design will they match if I install them in a large wall
Answer:	We do not guarantee that they will flow seamlessly when multiple murals are placed next to each other. We do not offer murals that mirror each other at this time.
Question:	It says "Removable sticker" - does that mean it requires no glue? Just goes on wall like a big sticker
Answer:	Yes it's a huge sticker takes about 2 of these to cover full wall.

Product features

Canvas Wall Art

High Definition Art Workprint on canvas with vivid color on thick high-quality canvas to create the look and feel of the original nature and masterpiece.

Wall Mural

Our High quality printing process ensures the wall murals is very clear and without defect. The wall mural is cut into 6 panels for easy installation.

Tapestries

Our Tapestries are made in the USA with 100% Polyester and its machine washable.

High Quality Vinyl

• Won't leave a mark when repositioned no residue left behind.
• Unique and one of a kind exclusive designs by Wall26 for installation on flat dry surfaces indoor/outdoor walls doors and even windows.
• Very easy to apply, remove or reposition - just peel & stick.

Step 1.

Wipe down your wall with a dry lint-free cloth, remove all dust. The cleaner the wall the better the results. 



Locate the first panel indicated as #1 on the left side of these instructions.

Step 2.

Lay panel face down on a flat surface. Peel the banking paper down about six inches from the top edge exposing the adhesive. Crease the banking paper edge sharply to keep it out of the way during installation. 

Step 3.

Align the graphic on the wall and use your fingers to tack on the graphic into place.

Step 4.

Use a dry towel and begin methodically brushing with firm pressure from the center of the graphic to the left edge and then to the right edge. Start at the top of the graphic and move down.

Step 5.

Continue to brush from center out as you make your way down the graphic.

Step 6.

Pull the liner down as needed to expose more of the adhesive back, use two hands. Work six inches at a time for greater control. 

Step 7.

Once you have adhered the graphic top to bottom, using a circular motion, rebrush the outer there inches of full graphic to ensure the best adhesion.

Step 8.

Repeat steps 2-7 for the remaning panels. The panels include a 1 inch overlap for easy seams.



Finish by trimming excess material.

• Adjustable storage system is made of high-quality heavy-duty ABS material to ensure excellent quality. Each storage unit is 16 inches long, or a total of 4 rails, up to 64 inches. Each hook comes with a non-slip vinyl covering prong for better fixing tools.
• Tool hanger is very suitable for storing hanging mops, shovels, brooms, shovel, rake and other gardening tools in garages, basements or sheds.
• By adding reinforcing rib on steel plate, each hook of tool organizer bears the weight up to 15LBS(7KG), And each peg can bear the weight 5.5LBS(2.5KG).
• The hook is made of high-quality aluminum-plastic material, plus a strong PVC non-slip coating, which makes it easier to grasp objects and protect the surface of the goods from scratches. Don't worry about your garage or garden tools falling out.
• Complete set of tools includes: 4 x 16" ABS rail, 20pcs galvanized steel hooks with non-slip vinyl covered prongs, 20pcs ABS pegs, 4pcs ABS connectors,16 screws set with 16 dowels.

User questions & answers

Question:	What is the maximum weight it can hold for the whole unit
Answer:	We can hang just about any yard tools on it. It’s long enough and has enough holders you can put three or four shovels a couple of rakes weedeater, fishing poles what exact poundage hands-on depends on how Well that you mounted on the wall. If you go into the studs you can hold a whole Lotta weight
Question:	Is it normal to hear pieces moving around in the box
Answer:	Yes

Product description

Durable and versatile, attractive metal pegboard pack. Strong 20-gauge galvanized steel construction. Slots and holes to accept slotted accessories and conventional 1/4-inch peg hooks. Kit includes: two galvanized metal pegboard panels (32 inches by 16 inches; overall size 32 inches tall by 32 inches wide by 3/4-inch deep), mounting hardware, and instructions. Made in the U.S.A.

• Metal
• More than ten times stronger than conventional pegboard and 32in Tall x 16in
• Galvanized steel pegboard panels accept slotted, stable, and more secure hooks, pegs, brackets, and shelves
• Steel panel prevents the pegboard holes from fraying and wearing out over time. For mounting into concrete, we would recommend using Blue TapCon screws or equivalent
• Steel pegboards are constructed with a pre-formed 3/4-inch flange that separates the panel storage surface from the wall
• Pegboard panels mount directly into studs or sheet rock with no framework required

User questions & answers

Question:	Did anyone install this on a concrete basement wall
Answer:	I suppose that would work--they are heavy enough to handle sheet-metal screws and piano hinges. However, they are only 16"w x 32"t. It wouldn't be a very high screen. It would also be expensive. I think you'd be better off just buying a screen.
Question:	Could I hinge these together, to create a zig-zag formation, something like a dressing screen works, with multiple sets
Answer:	They make these rubber pegboard hole gaskets and I bought them on amazon Pegitz Pegboard Peg Locks 50PCS (1/4 inch, Black) they have both sizes 1/4 and 1/8 inch. I bought them in white and they work great. Worth the extra investment for the smaller pegboard accessories.
Question:	Which hooks should I buy? I have tried multiple 1/4" hooks and none work
Answer:	Yes, my order came with two pieces, each was 16 inches wide. I ordered two sets (4 panels total) and connected them all together for one 32 inch by 64 inch pegboard.
Question:	I see two boards in the online photo. Do two boards come with an order qty
Answer:	Yes. The peg boards fold on top of each other and the top and bottom come off too. Very easy to put together. No tools required.

Product features

Wall Control Storage Systems

Wall Control's patented line of American Made metal pegboard products will last a lifetime while offering the highest quality tool storage available and at an exceptional value. From the Garage to the Kitchen to the Garden Shed, Wall Control's heavy-duty wall-mounted pegboard organizers have your storage and organization needs covered. End your frustration with inferior storage systems today and invest in an American Made Wall Control Storage System that is engineered for life.

Accepts Conventional 1/4 inch Pegboard Pegs

Wall Control's Metal Pegboard panels accept conventional 1/4 inch pegboard pegs in addition to Wall Control's more secure slotted pegboard pegs. This patented pegboard storage system offers maximum versatility by allowing you to utilize your old pegboard pegs and Wall Control's more secure slotted hooks, brackets, and shelving systems. A couple of things to note here, you can also use 1/8 inch pegboard pegs and accessories but they will fit much looser as these holes are designed for 1/4 inch pegboard pegs. There are many manufacturers of conventional pegboard pegs and we cannot guarantee every one will work with these panels so please be sure to check with the manufacturer of the peg hooks if they are not made by Wall Control.

Accepts Wall Control Slotted Pegboard Pegs

Wall Control's Metal Pegboard panels accept all of Wall Control's patented slotted pegboard hooks, brackets, and shelving assemblies. Wall Control's patented pegboard system does not limit you to one proprietary set of pegboard accessories but instead offers many options. It is true, Wall Control's proprietary slotted system does out perform all other conventional pegboard peg systems but if you just love those little round pegs, feel free to use them. However, if you want to upgrade to Wall Control's First-in-Class Slotted Hook Accessory System then your panels will be ready when you are. You can upgrade all at once or one hook and panel at a time as your budget and needs dictate. That is the beauty of the Wall Control Pegboard Storage System.

Product description

Power: 70W

Life span : 80000 Hours

Lumen: 8500LM

Light color: 6500K Daylight

Suitable for: indoor special lighting

LED: Super Bright LED Module

Material: Aeronautical Aluminum

Base Type: E26/E27 medium base

Adjustable Angle:90°

Wattage:70W±10%

Voltage: AC 100-277V

CRI: >85



90° lighting for Whole Garage

Wall and ceiling also be lighting

This Deformable Designed garage light will give a super brightness for garage and No dark work place.

We build this lamps within 4 ultra-bright adjustable aluminum LED wings , the LED wings can be folded up to 100 degrees, wide angle up to 90 degree .We use the strong material for the shaft part ensures that the rotation will not be damaged.

By changing the irradiation angle of the lamps, you can adjust the LED wings to lighting anywhere for wall or for any work place that you want .



8500 lumens 6500K daylight --UPDATED Brighter!

Totally 8500 lumen by High quality LED Chip, We use brand-LED chip inside , CRI >85 which will make your garage looks better.

6500K color temperature is the best color temperature for daylight using, which will provide the best indoor lighting experience.

Consume only 70w, saving energy up to 85%+.



No tool Required,Fit E26 Base

NO additional tool is required. This garage light can be use in a standard medium screw rocket (E26/E27) as easily as screwing in a normal bulb.

there is no wires require, no need ask a professional electricians for help.

• ①【70W & 8500LM-Super Bright Garage Light. Newest design: Four Adjustable Panels--224 Led Lights Bulbs】Super Bright Garage Lights, Powerful, non-diminishing brightness from led garage lights, With 4 ultra-bright adjustable aluminum LED heads, Leading LED technology with 224Pcs top quality chips produce 120 lumen per watt, up to 8500 lumen. This light good for large areas, garages, barns, storage rooms, warehouses, and workshops and so on.
• ②【80000 Hours Lifetime & Die-cast Aluminum Panel &Energy Saving. Long Life & 85% Energy Saving】70W Shop Light made with a safe premium aluminum alloy housing, stable and durable under maximum performance. Premium Aluminum alloy heat dissipated, high-temperature resistant, along with the hollow-out structure greatly improved cooling efficiency for maximum performance and over 80,000 hours of constant run time, maintenance costs are greatly reduced
• ③【4 Wings 90° Humanized Adjustable Design】Unique wide-angle Led garage lighting design, the 4 arms of the led shop lights for garage are 90°rotation up and down., which can have a perfect garage lighting distribution curve according to your application, this will make the light cover 270° area. You can easily turn and redirect lights toward any darkest corner or working space.
• ④【Easy To Install & Screw Base E26/E27】Garage light fixture is easy to Install, no tools required, no wiring, just screw garage light bulb into a normal lamp receptacle. No harmful substances, 100% environmentally-friendly and 100% safe. However, this led garage lights brighter than a light bulb.Note that it works great in a standard light socket (E26/E27）
• ⑤【What You Get】Super brightness with low energy cost. Replace your light bulb with a 224 LEDs, CRI 80+, 6500K flex led. Save at least 85% energy and electricity cost. Meets the standard of FCC RoHS and CE. We promise 2-year free duty of replacement or refund if any quality problem. Standard ETL certification is more quality assured. BenqBot's friendly customer service and commitment.

Product features

Super bright, 4 high power LED panels as good as daylight

• Adjustable design,the coverage of light can reach 360°,really shine without dead ends
• Easy to install,no need any tools (install like an incandescent light bulb just screw it in)
• High-temperature resistant,heat dissipation structure
• Longer life span,no flicker, no dark
• Energy saving,lower maintenance costs

TOP LED CHIPS

√ Low light wane rate, ensuring that the light color and brightness still can reach the standard after the long-term use.

√ High-quality chips, extremely heat-dissipating to let their life can be more than 2 times longer.

PROS：

• -4*56=224 Led Light Bulbs
• -Super Bright, as good as daylight
• -Enery saving, longer life span ,no flicker, no dark.
• -Easy to install, No need to hardwire or hire an electrician.
• - Lower maintenance costs compared to existing lighting

Super Bright LED Garage Light

• Our garage lights with 4 high power LED panels have the features of high brightness (8500 lumen).
• Garage ceiling light features LED technology making screw in led garage light more bright than common bulbs, which will provide the best indoor lighting experience.
• We have increased the area of the lampshade that will allow for a wider range of illumination.
• Efficiency for maximum performance and over 80,000 hours of constant runtime.,maintenance costs are greatly reduced.

Easy to Install, No Need Any Tools

Install like an incandescent light bulb (just screw it in), NO additional tool is required.

1. Align the E26/E27 screw socket.
2. Rotate the garage light to the right until it is tight.

Note:

1. This garage lights ceiling is not waterproof. Ideal for both indoor and protected outdoor fixtures.
2. This garage ceiling lights contains high intensity LED devices, do not stare at the light beam at close range.

ADJUSTABLE ALUMINUM HEAD

• Four aluminugarage lighting distribution curve according to your application, this will make the light cover 360° area, really shine without dead ends
• Light coverage area: 360°
• Adjustable LED module: 0°- 90°
• Adjustable design,180-360° Light Angle

SPECIFICATION:

• Wattage 70W / Brightness: 8500LM
• Luminous Flux: 120 lm per watt / Light coverage area: 360°
• Interface Standard: E26/E27 Port
• Input Voltage: AC85~265V
• Color Rendering Index (CRI) ≧ 80
• Color Temperature: 6500K for Daylight Color
• Average life of garage light : 80000 Hours
• LED Beads: 224* Super Bright LED Module
• Material: Aeronautical Aluminum

Package includes: 1 x LED Garage Ceiling Lamp / 1 x User’s Manual

• 💨Fits Garage Sizes Up to 16x7': Our 16x7FT double door screen can be used as a replacement for fixed screen and fits front, rear, interior or exterior entry, patio, deck, porch, balcony, etc.
• 💨Let Fresh Air In: Our premium fiberglass garage door screen is ventilated and illuminates your garage. It last much longer than polyester one. It seals the entire edge of the garage door and turns your garage into an extra living space free of bugs and dust.
• 💨Extra Gravity Sticks Design: Directly walk through screen door no matter for you or your pets. Extra gravity sticks were added in the bottom sides, which helps wind resistance and to also ensure that the screen automatically closes quicker every time.
• 💨Premium Fiberglass Quality: Made with durable fiberglass mesh, which is tear-resistant, fireproof, transmitting, ventilation, corrosion-resistant, good shape, comes with thumbtacks and hook&loop adhesive strips for extra security. Aurelio Tech garage door screen is designed perfectly for a pet screen door and a real high-traffic door for your house.
• 💨DIY Easy to Install: Use the included hook and loop strap to install in a few minutes, very easy and instant. Additional push pins add safety and strength. The screen is retractable, frameless, detachable, twistable and foldable for temporary off-season storage.

User questions & answers

Question:	How hard is it to open to get a car in and out
Answer:	We have strong winds here off the lake. It lasted for a couple months but I just bought some new Velcro take to replace the old. Overall it works well but probably will have to replace the tape from time to time.
Question:	How does it work on a door smaller than 16' wide. I'm putting on barn door, which is 11 feet wide
Answer:	not sure sorry but fixes the 3000
Question:	Can you install screen inside garage door
Answer:	I’m not sure if they are the same part number at eb5000x that I have but it fits mine fine
Question:	Do they make one taller than 7 feet top to bottom
Answer:	6 1/2"× 4 5/8"×1 3/16"