12 best cantilever scope mounts

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	Work for m1a eye relief
Answer:	If you want to do a durability test to see how many times you can send a pellet down range before it refuses to hold zero, you can use it on a magnum air rifle. If it is a variable pump, non-magnum (Below 1000 FPS) inert gas, springer (any speed below 700 FPS) or a PCP air gun the answer will be yes. Otherwise if you do expect to use it on a spring piston(springer) or magnum speed rifle of any make the answer will be you can try but your durability will suffer. I have killed 4 scopes over the last 2 years putting them on my pellet rifles(Barksa, Centerpoint, Simmons and Gamo). Now I use magnum airgun rated scopes (Cabela's Brand the best so far and UTG/Leapers).
Question:	Will this fit on a chiappa m
Answer:	Yes, I put it on my 30+ year old Marlin model 60 with the included rings and it not only bolted right on, but I was on paper at 50 yards with the first shot group - only about 4" off target with no pre-sighting at all!
Question:	Would this mount be strong enough for use with a shotgun
Answer:	The rings that come with this scope will not securely attach to the dovetail on either a Marlin XT-22 or a Marlin 795. There is a lot of the scope creep. For the XT-22 I bought weaver scope bases, for the Marlin 795 I ended up buying a UTG air rifle base with integral rings. The scope is great, the rings that come with it are subpar though.
Question:	What is the height from top of rail to bottom of ring
Answer:	I have it mounted on my 10/22 takedown. Fits in the carrying case when mounted, but barely. Great scope for that rifle imo

Product description

Vortex Cantilever Ring Mount for 1-Inch Tube w/ 2in Offset, 1. 59in/40. 39mm, Black CM-102, Matte, 2" Offset (1. 59" / 40. 39mm)v 2. 5" Between Rings

• Included Components: Set Of Rings

User questions & answers

Question:	Will these work for my vortex crossfire ii 3-9x50 riflescope w/ v-brite reticle(.270 rem adl rifle) ty
Answer:	My granddaughter opened all the doors at once. She is 2 1/2 years old. So no ours cannot cannot be reused in the way it was originally opened. But she had a wonderful time with the pieces!
Question:	How sturdy is this mount with a scope on it is it very secure
Answer:	I haven’t found the extra pieces to do that. I would like to get the stable so that the Advent calendar could turn into a regular nativity. I have found that you can get extra camels, but you really have to look for them. I would also like to be able to expand my granddaughters Noah’s ark set to the larger set. I haven’t been able to find those animals either.
Question:	Will this provide enough clearance to mount a 50mm objective NightForce Scope on top of an AR
Answer:	No. It comes in the set only.
Question:	Will this work on a Ruger precision rifle with the 20 moa base with the vortex viper pst 6-24x50 with the sunshade
Answer:	This product is for my granddaughter so it hasn’t been opened yet. Whole box measures 16”x 30”. Daily slots to be opened measure 2” x 3” with 2 slots that are larger. The manger is part of the cardboard packaging of the whole box. This looks like it will be fun for younger kids to count down the days in December.

• Sport type: Hunting
• Made with pride in the USA.
• Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting.
• Package Weight: 0.268 kilograms

User questions & answers

Question:	Will this work for a ar10 using a vortex diamondback 6x24x
Answer:	Did this mount work for your scope? I just bought that exact scope for my T/C Ventire 270win and wanted to know if u cleared ur barrel? Thanks
Question:	Will this mount to a Lithgow LA-101 which uses a weaver mount
Answer:	The mount is very sturdy. I use it with a Nikon P-300 mounted on a 300BLK rifle. I've never had any problems. Make sure to use locktite on screws.
Question:	Will this work to use a sightmark latitude 10-40x60 f-class riflescope, black, sm13044ftr xk-rs-frcl-sm13044ftr on a ruger precision rifle
Answer:	I have the 1.5" version of this in top of an AR10 (similar mount) and it's too low to clear my 50mm objective crossfire. You want this one. I'll post again after I get it mounted, but I only need another .25" so I'm confident this will resolve my problem.
Question:	What are the pros / cons on having a cantilever or stand alone rings on a ruger precision rifle in 6.5cr
Answer:	Yes it will. Not sure why everyone else answering this question has to be a jerk. Best of luck with your setup! Make sure to learn to zero and calculate ballistics

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• Lightweight 6061 grade aluminum construction
• All Monstrum Tactical optics mounts come with a lifetime guarantee

User questions & answers

Question:	Will this fit my panzer arms ar
Answer:	You can press fn and Q to turn off the backlights, press them again to turn on the backlights.
Question:	I lost my sight in my right eye and would like to shoot right handed with my left eye. What kind of an off-set system do you have that I can do this
Answer:	After you turn it on, backlights is just single color. You can press "fn" + Q or "fn" + lamb key on the right side of the space bar to open the rainbow color. If you want to change different rainbow colors, you can press "fn"+RGB to change different rainbow colors.
Question:	I see a comment below that says it is made of steel, not aliminium, which is it really
Answer:	Yes, these keys works well with original apps from Apple.
Question:	Will this work with a Nikon P
Answer:	There’s two little circles on the bottom corners that you rotate outwards and it’ll let your iPad come right out

Product features

Weighs in at a mere 9 ounces!

Crafted from 6061 Aircraft Grade Aluminum. At a weight comparable to a set of lightweight rings, it provides the added rigidity and convenience of a one piece mount.

Built specifically for 1 inch scopes.

The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle.

The mount is 5.75 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install.

Heavy Duty Lockdown

The 12 hardened steel torx bolts allow you torque down your scope mount to specifications without worrying about stripping the screws like competitors.

The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position.

Product description

Features a rear ring that is pushed forward 2 inches, resulting in better eye relief. This scope mount is designed to fit type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection.

• Mounting rings are pushed forward 2" for better eye relief
• Designed for mil-spec upper receivers with 1913 Picatinny rail
• 6061 T6 extruded aluminum construction
• MIL-A-Type 3 black hard-coat anodize
• Ridged and lightweight; Made in the USA

User questions & answers

Question:	Can iy be mounted in reverse to bring scope close to shooter for eye relief
Answer:	I just received the 0.8" height rings and mounted a Vortex 4-12x44 Copperhead scope on a Picatinny rail equipped bolt action. The fit was perfect.
Question:	Will this work on 7.62x54r
Answer:	no they will not. they only mount to a picatinny rail mount or weaver style mounts. these are too wide for dovetail .
Question:	Does this work on Ruger Precision Rifles
Answer:	If the diameter of your scope is one inch you can use the one inch diameter rings. Now what you have got to deal with is the height of the rings which will probably have to be a "high" ring to use with a 50MM objective lens. Medium rings might give you clearance between the scope objective end and the barrel but I doubt it. If you are mounting it on an AR platform it would probably work. Ya just have to try different combinations sometimes to get the right fit for you!
Question:	Where is this made
Answer:	While the rings did not give recommended torque specs my scope recommended no tighter than 15 inch pounds

Product features

Manufacturing

'At Aero Precision we’re known for two things: superior engineering & machining, and the ability to get the customer what they need, when they need it. Our products have been recognized across the country by members of the military and law enforcement communities for a simple fact - they work better.'

Aero Precision’s roots are deeply tied to aerospace, and our drive for clean, perfect engineering and machining stems from that. When you’re building something that will fly in the air, there is no margin for error. We take that same approach in the firearms industry. Not every manufacturer will have razor thin tolerance levels. Not every manufacturer will personally oversee the development, design and machining of every part that comes off the line. We’re not every manufacturer.

Product description

Bestsight Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting





Specifications:



Material: Aluminum Alloy

Color: Black

Ring Diameter: 30mm (1.2”)

Reducer Diameter: 25.4mm (1”)

Product weight: 0.5lbs.

Package dimensions: 7.0 inch x 2.5 inch x 2.56inch





Package includes:

1 x Dual Ring Scope Mount

2 x Plastic ring diameter 1 inch(25.4mm)

1 x Wrench

• Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.
• [More Stable]Use of 6 screws in total is more stable and secure than 2 screws on standard mounts
• [Easy to Operate]Scope mount with two round buttons for easy detach.
• [Suitable for High Recoil]Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
• Defect: Whether it is installed or disassembled, you need to remove 12 screws

User questions & answers

Question:	Will this work on my cva scout v2 .45-70 govt
Answer:	Go with a mount with no forward cant. This is to push the scope forward and still be able to mount to the receiver.
Question:	do the screws holding the scope need to be torqued to specific amount
Answer:	It will work on any firearm regardless of caliber as long as the firearm has a mil spec 1917 picatinny rail or equivalent on top. Since you asked 7.62x54r, I'm going to guess Mosin Nagant. You'll need an adapter to mount this. Also, you might be better served with scope rings instead as they allow for a lower scope placement. This mount was designed for AR style weapons so it rests quite high.
Question:	Can this be mounted on gamo 6110017154 varmint air rifle .177 cal
Answer:	This item will fit on a Ruger Precision Rifle, but is designed to push the scope forward for more eye relief. I believe the standard model or the extended version would be a better fit on a bolt action rifle than this SPR mount.
Question:	what is the ring height from base of the mount to bottom of the ring? Will this fit a 54 mm objective lens scope on a flat top pictanny rail
Answer:	This is made in the USA at their factory in Tacoma, WA.

• Fits 20mm Picatinny Weaver rails
• Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings
• Heavy duty - Scope Mount Weight about 8.38oz
• Mount provides 2" of forward scope positioning on the .223 flat top platform
• Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories

User questions & answers

Question:	What is the distance between the two mounting bolts, from internal front edge of the first bolt to the internal front edge of the second
Answer:	Worked on my ar10 with vortex viper pst 5x25x50 so yes it should
Question:	I have a Bushnell 4.5-18x40 scope. Will this mount have enough back and forth adjustment for eye relief? mounting on flat top ar
Answer:	Yes it should work.
Question:	What aluminium is made of: 6061 or
Answer:	Man don’t want to give bum info I used this to mount a vortex Diamondback tactical 12x40 on a SIG 716 , I would suggest you call vortex they give awesome customer service
Question:	Can I turn this around and have the scope extend rearward over the stock for closer eye relief
Answer:	With the flat top that I have it works because it moves the scope forward to get my eye relief. I have a very small area to mount a scope, without this feature I wouldn’t be able to mount one.

Product features

1 inch Rings Heavy duty Cantilever Rifle Scope Mount

The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle.

Ring top feature picatinny for mounting laser flashlight and compact red dot and so on accessories

The mount is 5.3 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install.

Product description

Aero Precision Ultralight 30mm Extended Scope Mount features a rear ring that is pushed forward 1 inch, resulting in better eye relief. This scope mount is designed to fit upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection. Aero Precision Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

• Rear ring is pushed forward 1" for better eye relief
• Designed for mil-spec upper receivers with 1913 Picatinny rail
• 6061 T6 extruded aluminum construction
• MIL-A-Type 3 black hard-coat anodize
• Department Name: Unisex-Adult

User questions & answers

Question:	Is the part number for this apra
Answer:	Will work yes. However I believe to high for. Lever action rifle
Question:	I lost the tightening tool for the screws, and am looking for a replacement. I'm wondering, are the screws/tool are proprietary
Answer:	The screws can be torqued until theyre tight enough that the scope does not wobble at all, then you can zero the scope itself for accuracy.
Question:	Will this elevate the scope high enough to clear fixed front sights
Answer:	As long as it has a weaver style rail (Picatinny rail) on top, it will fit.
Question:	What's the difference between this model and the "SPR" model
Answer:	I had to get a cantilevered mount to get my 4.5x-18x 40mm Bushnell to mount forward of the charging handle of my Ruger AR-556. I don't know why they give the measurements that they do, but as best as I could measure without taking it back off the rifle, it is one inch from the bottom of the mount to inside of the ring for a 30mm scope, or 1 & 1/16" with the sleeves for a 1" scope. As for a 54mm objective, it is satisfactory with my 40mm, but I would actually prefer a slightly higher mount.

Product features

Manufacturing

'At Aero Precision we’re known for two things: superior engineering & machining, and the ability to get the customer what they need, when they need it. Our products have been recognized across the country by members of the military and law enforcement communities for a simple fact - they work better.'

Aero Precision’s roots are deeply tied to aerospace, and our drive for clean, perfect engineering and machining stems from that. When you’re building something that will fly in the air, there is no margin for error. We take that same approach in the firearms industry. Not every manufacturer will have razor thin tolerance levels. Not every manufacturer will personally oversee the development, design and machining of every part that comes off the line. We’re not every manufacturer.

Product description

UTG new Gen. 1" integral offset ring mount, Aircraft grade UTG ace-sync 1" high profile 50mm offset Pica tinny scope ring mount, Aircraft grade aluminum, precision cut inner ring, single mount utilizes locking torn screws and integral Pica tinny recoil stops for a secure zero hold, 100mm base, 22mm saddle heir.

• Included Components: Screw,Allen Wrench T20 Trox

User questions & answers

Question:	what do these fit a 1 inch tube or 30mm tube, your information is misleading in the listing, the number cross ref to leapers 1 inch tube
Answer:	It's 50mm.
Question:	Is this mount for a 1" tube
Answer:	I cant be 100% sure but i believe it will cause you can slide back and forth quit a bit, plus i guess if you had to ,you could turn it around. All my ar's have scopes and havnt had a issue yet, only issue is i had to get a charge handle extension. Hope this helps.
Question:	Any ironsight recommendation to use with this scope mount? They would need to be low enough to view through the base of the scope mount
Answer:	It never said on the package that I recall. My guess would be 6061 but I really don't know.
Question:	Will this work with a 50mm scope on an AR
Answer:	I'm not sure I have not turned one around but I don't see why it wouldn't work

Product features

UTG ACCU-SYNC30mm Integral Picatinny Rings

Detail Information:

• UTG ACCU-SYNC 30mm High Profile 37mm Offset Scope Rings, Comes in a Pair and Designed for a Precise Fit on MIL-STD-1913 Picatinny Rails
• Precision CNC Machined from Aircraft Grade Aluminum and Finished in a Matte Black Anodize
• Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability
• Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
• Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops For a Secure Zero Hold
• 22mm Saddle Height, 37mm Offset Distance, 33mm Base Length, Fits 30mm Tube Optics with up to a 73mm Outer Objective Diameter
• Includes a T20 Torx Wrench for Simple and User Friendly Installation

About Us

We set un-compromised high standards for all of our business operations. Our goal is to provide a total solution for any line of products we offer. We pay close attention to industry trends with a focus on making the products available for hunting, shooting and outdoor enthusiasts like you.

In 2009, we made an important decision to start our Made-In-the-USA Manufacturing Operation. We will continue to follow our vision for U.S. made products, to be innovation-driven.

• Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes to Picatinny equipped rifles
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	will this work for a vortex crossfire ii? 1-4x
Answer:	The cross pins must drop into slots in rail. It's easier if you mount the mounts to the rail, then put in the scope.
Question:	Plan to mount vortex crossfilre ii adjustable objective 30mm on ruger pc carbine. does this mount work for them
Answer:	yeas i believe so i removed pac9 chiappa front post on firearm i use them for and installed full size rail and back up sights (tactcon) and they worked perfectly with those .so i can see thru my red dot right on middle if i don't use red dot .good product .sturdy easy install .good luck.i hope this helped ..rally
Question:	Can this take a 50bmg
Answer:	I could not on mini 14
Question:	How can you trust these the QD levers don't lock
Answer:	Hello, sure it is no problem to mount a scope on your AR15 with the product. And rest assured that the scope rings is adequate for all 20mm picatinny rails.Hope the answer is helpful to you.Regards,Modkin

• Fits 20mm Picatinny Weaver rails
• Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
• Built in Weaver style rails - very handy fitting flashlights and lasers etc.
• Front Lens Size: Up to 56mm - This figure describes the maximum size of the objective (front) lens.
• Scope Mount with Qick Detach Locks for Picatinny Weaver Rail

User questions & answers

Question:	Will fit on the Savage Mark ll with rails etched in
Answer:	Yes it should work. It looks like the Monstrum G3 has a 30mm tube.
Question:	Will it fit in a tube 9x16 and a 20mm rail
Answer:	I believe they are cast. Not sure about the warranty. I've had mine for quite a while, using it for night vision hunting hogs. It's worked perfectly for me, lots of hogs to its credit..good mount...highly recommend.
Question:	will a 3-9×40 scope fit on this mount
Answer:	Not in USA but for the money adequate mount do not over tighten 20lbs
Question:	Will this work on my cz
Answer:	Not from side to side just forward of the rail

Product features

1inch and 30mm Quick Release Cantilever Rifle Scope Mount

1inch / 30mm Forward reach 1 Piece Rifle Scope Mount Airsoft One Piece Torch Mount with quick release Fits 20mm Weaver rails Comes with 25.4mm reducer inserts so you can use this with 30mm and 1 inch body tube rifle scopes. Built in Weaver style rails - very handy fitting flashlights and lasers etc. Front Lens Size: Up to 56mm - This figure describes the maximum size of the objective (front) lens. Reach Forward / Backward Design. Clamp Design: Triple Clamp Finished in Tactical Matt Black.

Package Include

2 x Plastic ring diameter 1 inch(25.4mm)

2 x Wrench

• QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple installation and swapping of your scopes
• DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy; the torx screws are also heat-treated for added stability and strip prevention
• LONG RANGE: Hit your target from hundreds of yards away since our scope mount's 20 MOA tilt angle allows you to zero in your gun at a greater distance for precision long-range shooting
• CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and increased field-of-view
• SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the market; we back these rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come

User questions & answers

Question:	Is there more in 30mm? All I see is 25mm
Answer:	Yes. It says 1" rite in the description... and it's a high profile mount. With a 50 mm offset. It's nice. You wont be disappointed. I have put several of these on when you want a good mount that wont break the bank.
Question:	What is the height of the center of the recticle
Answer:	No . The problem is that the base of the scope ring mounts are not see through ( notch out).The base of the low,mid and high UTG scope mounts are all the same. The difference is the height the ring from the barrel. Hopefully this will help.
Question:	Can anyone confirm this mount is actually 20 moa
Answer:	Depends entirely on whether your tube is 2 inch or 30mm, check that, mount is high profile so it has enough clearance for your objective bell

Product features

Specifications

• Material: 6061-T6 Aluminum Alloy
• Overall Dimensions: 5.3 x 2.4 x 1.8 in. (13.5x6x4.5cm)
• Weight: 5.96 oz. (169 g)
• Ring Diameter: 1.18 in. (30 mm)
• Ring Spacing: 2.76 in. (70 mm)
• Tilt Angle: 20 MOA

Ring Diameter: 1.18″ (30 mm) Tilt Angle: 20 MOA Ring Spacing: 2.76″ (70 mm) Total Length: 5.43″ (138 mm) Weight: 5.96 oz. (169 g) Strong and durable mono cantilever mount designed for tactical use under the harshest conditions. Pre-set ring spacing and quick release screws allow for fast and simple mounting.

Durable Construction

Features lightweight 6061-T6 aluminum alloy construction with heat-treated torx screws for added strength, stability, and strip prevention.

Rapid Swap

Quick release screws allows for easy swapping of the dual-ring scope mount between your favorite weapons, so you can spend more time shooting.

Picatinny Mount

Our cantilevered mount can be sturdily installed on any rifle with a flat Picatinny rail and features integrated recoil dampeners to keep your aim true.