10 best micro dot

Product description

Glue Dots roll micro .125 325ct acid free. This product is manufactured in United States. Product belongs to arts, crafts and sewing.

• This product is manufactured in united states
• Product belongs to arts, crafts and sewing
• Package Dimensions : 1.23" L x 3.41" W x 5.47" H
• Country of Origin: UNITED STATES

User questions & answers

Question:	would th we work to put on bottoms of cupcakes to keep from falling over on delivery
Answer:	I have a latex allergy and used these pens for a long time without any trouble at all.
Question:	would it hold on forever??? like photos on scrapbooking paper
Answer:	Hi Scotty, the ULTRA MICRO POINT are 0.38mm, the thinnest, finest line out of all the Signo 207's. The next size UP is the MICRO point, followed by the MEDIUM point, and lastly the BOLD point being the thickest, boldest line on paper. I own all these sizes, with various colors and have been using these pens for at least 15 yrs. In my opinion, they are the best on the market, with the added bonus of having the ink permeate the paper fibers, hence deterring "check-washing", since the colors won't bleed out. I love them...... I won't use anything else. Hope this helps.
Question:	Are glue dots safe for honed marble floors? I want to use them to secure my kitchen carpets
Answer:	I've been buying these pens for quite a while now, and every once in a while (Maybe one pen out of 5?) the pen skips horribly. I've found a way to salvage the faulty pens, however: Find a pen that wrote smoothly that is almost out of ink, and have the faulty pen in hand. Remove the clear cartridges (with a white tip) from each pen, and find a way to have them both stand upright. Remove the white tips from each cartridge, and transfer the tip that worked (wrote smoothly) to the cartridge full of ink (that belonged to the faulty pen). Then put the new cartridge into the pen casing and you're good to go. It takes a bit of pulling to get the tip out, but it doesn't take long to do, maybe five minutes. Not a perfect solution, but it's a way to salvage a full cartridge of ink.
Question:	Can these be easily removed? I'm looking for something to hold photos onto a wall but then easily be taken off to swap pictures
Answer:	I don't know I bought it do you use with Nikon D90 but did not work either

Product description

The Micro 3x Magnifier will work with any of our red dots but may introduce parallax. The Micro 3x will not work with prism scopes.

• The Micro 3x Magnifier adds next level 3x magnification to your rifle's red dot or holographic sight in an ultra compact, lightweight, and optically crisp package. The V3XM weighs in at only 6. 9 oz and only 9. 55 oz when including the mount.
• Anti-reflective coatings on all air-to-glass surfaces provide increased light transmission for greater clarity and low-light performance. The V3XM offers a wider field of view, better eye relief, a brighter image, and a more true color tone.
• Integrated quick-release mount allows fast attach/detach from your rail and a patented camlock desing quickly engages/disengages magnifier with direct pressure. Adjustable flip mount allows for right or left-handed use.
• The magnifier is shockproof and has been nitrogen purged for reliable water and fogproof performance in the field.
• Allows for lower 1/3 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight.

User questions & answers

Question:	Does this work with the T1 micro from aimpoint
Answer:	I have the same site and it does work with it
Question:	Will this work with my leupold freedom Rds
Answer:	It did not mine.
Question:	Why can't I order this here in California
Answer:	Tighten the mounting nut fully. I have no issues on either one of my AR’s.
Question:	Why can't it be shipped to California
Answer:	I would say no. You could technically flip out around but the weigh distribution and function aren’t equal. These “flip left” magnifiers may seem odd initially but they don’t interfere with 45° buis or your FOV as much, won’t get hit with flying brass, weight’s on support hand side.

Product features

Micro 3X Magnifier (V3XM)

Next level 3x magnification versatility when you need it for your red dot or holographic sight in an ultra compact, lightweight, and optically crisp package. Integrated quick-release mount allows fast attach/detach from your rail and a patented camlock design quickly engages/disengages magnifier with direct pressure. Adjustable flip mount allows for right or left-handed use.The Micro 3X magnifier will work with any of our red dots but may magnify any existing parallax.The Micro 3X will not work with prism scopes.

Micro 3X Magnifier Adjustments

The Micro 3X does not require any special sight-in—just zero-in the red dot as normal and add the Micro 3X behind. The dot-centering screws can be used to help center the red dot in the magnifier’s field of view. After it is mounted behind red dot, the dot may seem offcentered while viewing through the Micro 3X. This will not affect the point-of-impact. The centering screws can be used to move the dot up/down or left/right until centered. Do not force screws once resistance is felt and the end-of-travel range has been reached.

Micro 3X Magnifier Adjustments

Use the focus knob to achieve a sharp image. Turn the focus dial clockwise or counter-clockwise until image is as sharp as possible.

Micro 3X Magnifier Adjustments

To use the included flip mount, simply apply direct pressure and flip the Micro3X Magnifier to the left or right side (depending on mounting direction). To return, simply push magnifier back into original position.

• Easy to Zero in and mount:it's held its zero perfectly and great for pistols and rifles.
• Comes with Weaver/Picatinny mount, adaptive base footprint compatible with Glock MOS , also compatible with different pistols mounting plates that replace rear sight dovetail, Vector Optics model SCRD-19II,SCRD-35,SCRD-40,SCRD-10A,SCRD-10B,SCRD-10C are designed to fit footprint of plate made for VT Venxx, BU FF, Docter etc any plate made for those brands also fits this sight.
• 3 MOA dot: It promotes rapid target acquistion while providing a precise point of aim; getting shots down range and on target fast
• Well Made Red Dot:The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while quality coatings protect your lens from oil, dirt, and scratches.
• Great red dot sight with lightweight:This red dot sight with compact design, This sight won’t negatively affect your firearm balance of handling.Pls make sure when installed,pls make sure plate level are correct in the pistol slide when installed.We are the professional manufacturer of the rifle scope,red dot and mount hardware.If there is any Parts missed or broken,Contact Us Via Amazon Mail ,A new replacement or money back guarantee.

User questions & answers

Question:	Have a barreta px4 storm compact with a Burris plat will this fit on the Burris plat
Answer:	Hi, this pen is not refillable.
Question:	Will this fit on a fn 509 tactical 9mm
Answer:	YES, they will draw or fill shapes on most plastic. There are special acetates on the market like "prepared acetate" and "Duralar" that are formulated to take ink. you could work in free brushstrokes but you would not be able to lay one color over another without creating mud.
Question:	Which mounting plate do you use? For a Glock
Answer:	Hello Sign Pen user! The item noted as SESF30C Micro Brush Tip is a water-based dye ink pen. Sincerely, Consumer Quality Assurance team Pentel of America, Ltd. 4000 E. Airport Dr., Suite C Ontario, CA 91761 (USA) 1-(855) 528-4101 [email protected]
Question:	Im confused. within the 1st 5 questions it was asked if this sight will fit a slide cut for a rmr and 1st answer yes and 2nd was no. which is it
Answer:	I have been using these pens for years. Everyone that borrows one of them from me, wants to keep it. It is very comfortable pen to write with. You do not have to push hard because the ink flow is perfect. In my opinion this pen makes it fun to write. I buy them by the box. Plus the blue color is crisp and clear.

Product features

TAC Vector Optics Frenzy 1x17x24 3MOA Mini Dot Sight

• PINPOINT ACCURACY
• LIGHTWEIGHT OPTICS
• VERSATILITY DEFINED
• RED DOT SIGHT
• MUST-HAVE COMPETITION GEAR
• 3 MOA DOT RETICLE
• WIND AGE AND ELEVATION ADJUSTMENTS Magnification: N/A

• MICRO RED DOT SIGHT: The HS403R is a 20mm micro optical sight with a durable T6061-T6 aluminum housing designed to be made compatible for rifle and carbine applications.
• LONG BATTERY LIFE: The HS403R optic uses a high capacity CR2032 lithium ion battery with up to 100,000 hours of battery life to power the optic.
• MULTI-COATED LENS: Holosun’s optics are manufactured using optical glass with multilayer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare.
• PARALLAX-FREE: When the red dot is on the target, so are you; 2 MOA dot size.
• SUPER LED: Holosun Super LEDs provide a versatile range of intensity for the brightest environments down to no light situation.

User questions & answers

Question:	Is this sight compatible with the new Century arms C39v2 side mount
Answer:	I don’t think I have seen a small tip like this in white from the major brands. Ya might want to check more artistic drawing focused brands.
Question:	Hs403r whiskers on red dot at any level
Answer:	It's easy to use, has a nice barrel and writes well. Is it comfortable? Doesn't cause me any discomfort to me and I hope the pen is comfortable as well...
Question:	Does it have auto shut off
Answer:	Just 5 as shown in the current product image. Just 5. So cherish them. So smooth, so fine. Why they aren't sold in stores is a mystery. Are they made by elves? Because they are hard to find and stupid magical when you write with them. I may be addicted to these pens.
Question:	Battery external like Aimpoint micro
Answer:	Hello, There are water-based dye inks that are fully blendable with water and other Pentel Sign Pen Brush Colors. Kind regards, CONSUMER QUALITY ASSURANCE TEAM. Pentel Of America Ltd, 4000 E. Airport Dr. Suite C, Ontario CA 91761. Phone: (855) 528-4101

Product description

Russian Shvabe VOMZ Pilad 1x20M micro red dot. Modified version of widely used Pilad 1x20, 1x20M has smaller dot and manual brightness adjustment. This one is super lightweight and small. Can handle recoil up to 12 Gauge. FOV - unlimited Objective apperture - 26mm Dot size - 4 MOA Adjustment click - 1 MOA Brightness adjustment - manual Power - 1 CR2032 (included) Operating time - 70 hours Operating temperature +40 to -40 Centigrade Size - 47x36x38 mm (1.85x1.4x1.5 inches) Weight - 70g (2.46 oz) Dust and water resistant NVG compatible Mounting - Picatinny or Weaver rail

• Reticle - dot
• Dot size - 4 MOA
• Power - 1 CR2032 (included)
• Operating time - 70 hours
• Size - 47x36x38 mm (1.85x1.4x1.5 inches)

User questions & answers

Question:	do you know if it will fit a springfeild hellcat osp
Answer:	Cross pens have not been assembled in USA from Chinese parts since 2004. Cross pens have not been made in USA since 1998. Cross is just a brand name now. The Cross company that designed and made the great pens of the 20th century does not exist anymore. The name is now owned by a capital fund that shops in China for pens to sell under the Cross name hoping consumers still think they are the same quality pens of old.
Question:	Will this fit a cz p-10c
Answer:	Any Uniball 307 or 207 refill will fit the housing. They only differ in the size of the ball tip.

• MICRO RED DOT SIGHT: The HS503CU is a 20mm micro optical sight with a durable T6061-T6 aluminum housing designed to be made compatible for rifle and carbine applications.
• SUPER LED: High capacity CR2032 lithium ion battery with up to 100,000 hours of battery life powers the optic; Holosun Super LEDs provide a versatile range of intensity for the brightest environments down to no light situation.
• MULTI-COATED LENS: Holosun’s optics are manufactured using optical glass with multilayer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare.
• PARALLAX-FREE: When the red dot is on the target, so are you; 2 MOA dot size.
• SOLAR FAILSAFE TECHNOLOGY: Solar Failsafe allows the red dot sight to remain powered when your battery fails; also features a light sensor allowing the reticle to automatically adjust brightness under any lighting conditions.

User questions & answers

Question:	What is the difference between this and the 503C
Answer:	I don't know of galaxy s5, I bought it for an 2012xperia z1and work fine just by putting it in the phone, also with an adapter works flawlessly with win 8.1
Question:	Does the auto-off/shake-awake work on manual brightness
Answer:	Mlc
Question:	I ordered this model and noticed the front lens is tilted and not set squarely into the body at a 90 degree angle. Is this normal
Answer:	It is microSD to SD.Jim
Question:	Can you turn the circle off on this model
Answer:	If you're looking for UHS-ii speed, you must have a compatible reader/writer in the device. The card does not create the difficulty, but most devices do. Also there's the V60 or V90 convention for video recording which is fairly new and most devices are not yet compatible to it (cannot hold the rate). Hope this helps.
Question:	Will the tall riser block my mbus? i want to be able to still use my flip up sights
Answer:	It’s a micro sdxc card with adapter
Question:	Firstly, does this also have the motion on feature? Discription does not say or i over looked while reading. Also, does this work with the ksg
Answer:	It means it is at least 1/20 gold (by weight), which it must be, in order to be classified as "gold-filled."
Question:	Will this work on an AR
Answer:	Yes it does, but not as nice as their packaging used to be. My $80.00 pen & pencil set came in a cardboard box.jd
Question:	Will this co-witness with some mbus pro flip up irons
Answer:	0.7mm. I've had Cross pen and pencil sets for over thiry-five years. I like the larger pencil lead size. It doesen't break as easy, or as much, as when the Cross pencils were 0.5mm. jd

• Advanced objective lens system for better light transmission and unmatched optical clarity
• 2 MOA dot with 10 low light and daylight brightness settings
• Includes LRP mount and removable 39mm spacer for Picatinny rail interface
• Up to 5 years of continuous operation using one CR2032 battery (included)
• Front and rear flip-up lens covers. Reinforced windage and elevation turrets

User questions & answers

Question:

is the mount absolute or lower 1/3rd

Answer:

Good question. I did a little research and found out that there are many factors that affect the number of megabytes needed to take a single photo. For example, if a camera uses 10 megapixels for a single photo, based on the format of the photo, it can use as much as 30 (or more) megabytes of storage for a single photo. So, a 64 gigabyte card could hold up to 2000 plus photos based on those figures. 1000 megabytes (1 gigabyte) divided by 30 megabytes equals 33 photos. 64 gigabytes (64,000 megabytes) divided by 30 megabytes equals 2,133 photos.

Product features

Aimpoint Micro H-2 Red Dot Reflex Sight with LRP Mount and Spacer - 2 MOA - 200211

• 1X (non-magnifying)
• 2 MOA red dot
• Submersible to 15 Feet
• 12 brightness settings from extreme low light to bright daylight.
• Up to 50,000 hours (over 5 years) of constant operation from one CR-2032 battery.
• Front and rear plastic flip cap lens covers included
• Weight 3.0 oz (sight only)

Product description

SENTRY manufactures Scopecoats designed specifically to protect your illuminated optics. Made from our standard 3mm thick Neoprene/Nylon laminate composition that assists in repelling moisture and condensation away from your optic, as well as, dirt and debris.  This combination helps to protect your optics from the elements and damage while storing or transporting your gear.  Scopecoat safeguards military optics, including brands such as Aimpoint, Elcan, EOTech, Leopold, Trijicion, and more.  Extreme also available in 6mm Neoprene for those that demand uncompromising protection.

• Neoprene
• Made in the USA
• department name: mens
• included components: Optic Cover
• sport type: Hunting

User questions & answers

Question:	Will this fit a red dot from tru glo? It's about 3.5inches by 2inches
Answer:	Yes
Question:	will this fit a trijicon MRO
Answer:	Yes
Question:	Will this fit a Monstrom Raven Prism
Answer:	Yes
Question:	Will it work on thehis truglo red dot? https://www.amazon.com/dp/b0082om10i/ref=cm_sw_r_cp_apa_i_64w9ebxbk9knd
Answer:	Hi, We do believe this would work with Nintendo Switch. Regards, Customer Support 323 4158008

Product features

The worlds leader in transport, storage and protection of weapons and gear

• Military and Firearms Industry Veterans owned and operated
• "Live to Protect" focus on transport, storage and protection of weapons and gear
• Developed by feedback from the end customer, not a boardroom

Red Dot Sight Optic Cover

• Custom designed for your exact red dot sight optic

Red Dot Sight Optic Cover

• Neoprene 3mm, elastic type fit, protection from dings and moisture

Red Dot Sight Optic Cover

• Store or travel with the cover installed ensures a dust free optic

Product description

The Daniel Defense Micro Mount is designed to securely mount a variety of popular optics to your flat-top upper receiver including Aimpoint's Micro R-1" H-1" H-2" T-1" T-2" Vortex's Sparc I & II" Primary Arms' Micro Dot & Advanced Micro Dot" Holosun Technologies HS403" or any other optic utilizing the same type of mounting interface. Offering Absolute or a Lower 13rd Co-Witness with your back-up iron sights" this mount is ideal for shooters who are looking for one of the lightest and strongest mounts available to secure their optics.

• Absolute or lower 1/3rd co-witness
• Recoil lug interface between mount and optic
• Snag-free and reversible
• Patented Rock & Lock attachment system
• Daniel Defense, Micro Aimpoint Mount, Fits Picatinny, Includes Lower 1/3 Adapter, Black
• Lightweight

User questions & answers

Question:	If i get this, do i need to buy the t-2 micro with the standard rail mount or just the t-2 micro with no mount
Answer:	These particular glue dots are safe ...
Question:	Will it work with sig Romeo 5 red dot
Answer:	To stick something down on the wall and not worry about paint removal, use the command strips. They are the strips that are used for hanging the plastic hooks. They have ones that are just for sticking items on walls and when you pull on it, it comes off easily. Even Velcro sells them and you can get either of these items here on Amazon.https://www.amazon.com/gp/product/B01KQCHMIY/ref=abs_brd_tag_dp?smid=ATVPDKIKX0DER
Question:	What are the specs on the screws used for it
Answer:	My 128GB adata is made in Taiwan Amazon Ranger
Question:	Will this work on micro t
Answer:	Hi Dear Customer, This Micro Sd is coming with Adapter. SotoDeals

Product description

The Litl Mo offers a crystal clear easy to find sighting solution for pistols and carbines. A 1632 Coin cell, designed to have an easy change drawer, not requiring the operator to un-mount the optic to access the compartment, powers this tiny performance driven optic. The 3MOA Dot with 6 brightness levels makes quick work of getting on target. The Litl Mo is over built, waterproof and ready for action. Backed by the LUCID Optics lifetime , making this optic nearly worry free. The oversized reflex screen and a thoughtful, low placement of the lens set forward, make finding the dot near effortless, a welcome improvement to other offerings on the market currently.

• Waterproof
• Easy access battery drawer.
• Large reflex screen.
• 6 brightness levels
• Sport Type: Tactical & Military
• Included Components: Rail Mount

User questions & answers

Question:	how to open battery drawer
Answer:	I used a picatinny rail mount that comes with it.
Question:	How do you think this would work on a
Answer:	I believe they are referring to firearms which must use the dovetail adapter plate available separately for non-rmr cut slides.
Question:	Is this always on, shake awake or do you have to turn it on? What is the expected battery life
Answer:	The Craft Glue Dots are of the strongest bond and not sure what your cupcake wrappers are made from.. But the GLUE DOTS will work for your application but do not know what strength you need with only this information. we do provide free samples.8007175220
Question:	Will it fit an RMR footprint
Answer:	yes it will! But only lightweight photos. I would go up a size for heavier paper / photos.