11 best generic holster

Product description

Shaver Holsters are the top of the line Nylon Gun Holsters on the market. The construction of the holster is built to last. The holster is ambidextrous and has a belt loop on both sides for your belt, it also comes with a metal clip that can be moved from side to side if needed. The holster has an outer layer of Cordura nylon. The inner layer of the holster has padding and soft nylon to protect the finish of the gun. All velcro is covered with webbing to keep dust and lint from collecting on the holster, giving it a clean finished look for years to come. The holster has strong integrated stitching and is double stitched at all pressure points of the holster making this holster the top in its industry. Buy with confidence in knowing your buying a holster that will last you for years to come. You may just never have to buy another holster for your gun again...we build them to last!! Fits Smith & Wesson Air Weight

• Fits right or left hand
• Has metal clip that can be moved from side to side if needed.
• Has a belt loop on both sides for your belt.
• 30 Day money back guarantee.

User questions & answers

Product description

Replace your lost or damaged Defender Series Case belt clip with this belt clip holster This belt clip will fit your case perfectly just like the original did. The holster can be worn in any position you prefer as the belt clip swivels and locks into different positions. Made of strong, sturdy plastic and built to last! This holster fits the Defender Case for the Apple iPhone 6plus/6sPlus.

• Replacement Belt Clip Holster Fits the Apple iPhone 6plus/6sPlus(5.5') Otterbox Defender Case
• Replaces a lost or damaged holster that originally came with your Defender case
• Belt clip swivels and rotates and locks in any position you prefer
• Fits your Defender case the same way the original holster did
• This holster Only fits the the Defender case for the Apple iPhone 6plus/6sPlus( 5.5")

Product description

Holster is made for the Ruger LCP (.380) with Viridian Laser. We spend a lot of time testing the fit and getting it right. If for some reason you think we’ve made a mistake, and the holster does not fit your gun correctly, please contact us before leaving feedback so we can get it right for you. The retention strap is adjustable so that you can place the strap in the best location for your gun. You can adjust the retention strap by using a butter knife to release the velcro in the pockets that hold the retention straps. The holster comes configured for right handed use on your right side. For left handed use on the left side switch the retention straps around and move the metal clip to the other side. The easiest way to remove the metal clip from the webbing is by using a butter knife to gently ease and pry the webbing over the hooked bottom part of the metal clip. We’ll be happy to switch the holster to left handed use before we send it to you. Please send us a message if you want us to do that for you.

• Made in the USA, custom tailored for the Ruger LCP (.380) with Viridian Laser. Our premium OWB (outside the waistband) holsters are precision stitched using military grade poly-thread and heavy duty nylon. The holster is engineered with a soft inside lining that will save the finish on your firearm even with repeated use (kydex and leather holsters will damage your gun finish over time). The holster is padded to give your gun a nice, tight fit in the holster.
• Thumb break retention strap allows you to quickly draw your gun, but keeps somebody else from grabbing your gun. The thumb side is made from strong plastic allowing your thumb to easily break the retention and draw the gun in one quick, fluid motion. Other holsters made from kydex or plastic that don’t use a retention strap run the risk of an attacker being able to grab your gun. Stay safe with active retention.
• The holster comes with a belt loop and a metal clip. You can use either to attach the holster to your pants. The metal clip is heat treated for strength. Holster is ambidextrous and can be used for right handed or left handed use. It comes configured for right handed use. If you want us to switch it to left hand before we ship please contact us and let us know.
• Spare magazine pouch on the front of the holster. The Ruger LCP (.380) has a sharp front sight that will tear most nylon holsters. We line the inside leading edge of the holster with leather which keeps the holster from tearing, ensures a smooth draw, and provides excellent friction retention. This holster is primarily designed for open carry.
• Free Shipping - 100% satisfaction guarantee with 30 day returns. This holster is made specifically to fit with the Viridian Laser. If you have a different laser or tac light please contact us before purchasing to make sure the holster will fit.

User questions & answers

Product description

Our 'Demon' series of holster is designed for the competitive shooter. It is engineered to be faster, more adjustable, and easier to use than the vast majority of other holsters on the market. If speed is your objective, you wont find a better Desert Eagle holster. This holster is perfect for anyone looking to keep their Desert Eagle safe and secure on their hip! It will work great for competition shooting, firearms training, open carry, and LEO/military uses, or even just as something to keep your gun nearby on a casual day at the range. Built to fit: Desert Eagle XIX (will not fit earlier models such as the VII, if you're unsure about your pistol fitting, send me an e-mail!) Features of this holster: Extremely rugged .080 Carbon Fiber patterned kydex material Adjustable retention (loosen or tighten the 2 screws below the trigger guard to adjust the retention) Adjustable cant (just loosen the 4 screws in the clip, rotate the clip to your desired position, and tighten the screws) Adjustable for any belt size (rearrange the narrow pieces inside the "Tek-Lok" to fit any size belt from .5" to 2.25") Molded design latches onto gun with a desirable and reassuring 'click' Low cut for shorter draw length Full sweat shield to assist re-holstering and keep clothes from snagging Only the best hardware can be found on my holsters, the Blade-Tech Tek-Lok clip I selected is a work of art! Thank you for considering this product from GMI Holsters "Safe. Simple. Strong."

• Adjustable retention
• Adjustable cant

User questions & answers

Product description

Cebeci Arms is known worldwide in the military and police arenas. This tactical nylon 3-slot right-hand draw holster allows you to use it behind your back or on your right side/hip position for either a vertical draw or more horizontal (forward cant) draw. The adjustable snapping strap is held in with velcro. This holster fits many medium-large autos because of it's semi-universal design. Comfortable to wear, easy to use, and reliable. Will not accommodate a laser attachment.

• Wear Small of Back or Right Side/Hip
• 3 Belt Slots Offer 2 Draw Positions - Vertical and Forward Cant
• Adjustable Snapping Strap Holds Gun in Place
• Sturdy Tactical Nylon Construction

User questions & answers

Product description

This IWB concealment holster is made in the USA to fit the Ruger LC9S with LaserMax Laser. The holster is ambidextrous but comes configured for right handed use in the middle of the back. To switch the holster to left handed use, or for right handed use on the right side you can switch the metal clip to the other side of the holster. Remove the metal clip by using a butter knife to gently pry the webbing over the bottom hooked part of the metal clip and then slide the clip off. We’ll be happy to switch the metal clip for you before we send your holster. If you want us to switch it for you, please send us a message letting us know. Nylon holsters are more comfortable for inside the waistband carry than plastic or kydex holsters. Our IWB holsters have a cotton inside lining that that protects the surface finish of your gun, unlike leather or plastic holsters that will damage your gun’s finish. Our holsters have an extremely quick draw with a strong metal clip that keeps the holster firmly in place when drawing your gun. The narrow profile of the holster allows for deep concealment.

• Made in the USA, custom tailored for the Ruger LC9S with LaserMax Laser - Our IWB (inside the waistband) holsters are precision stitched with military grade poly-thread and the highest quality American made nylon and cotton.
• Engineered with a soft but strong cotton inside lining. This will save the finish on your firearm even with repeated use (kydex and leather holsters will damage your gun finish over time).
• Nylon holsters are more comfortable than kydex, plastic, or leather. Nylon is breathable and doesn’t pinch when worn inside the waistband. The holster is slender, allowing for deep concealment and maximum comfort.
• Heat treated metal clip holds strong and keeps the holster securely in place during a fast draw. The clip is reversible which allows carry in any position around your waistband including middle of back, right handed or left handed side, appendix carry, or 4 O’ Clock. Holster comes configured for right handed use in the middle of the back. The clip will fit up to a 2” belt.
• Free Shipping - 100% satisfaction guarantee with 30 day returns. This holster is made specifically to fit with the LaserMax Laser. If you have a different laser or tac light please contact us before purchasing to make sure the holster will fit.

User questions & answers

Product description

Holster is made for the Beretta 3032 Tomcat. We spend a lot of time testing the fit and getting it right. If for some reason you think we’ve made a mistake, and the holster does not fit your gun correctly, please contact us before leaving feedback so we can get it right for you. The retention strap is adjustable so that you can place the strap in the best location for your gun. You can adjust the retention strap by using a butter knife to release the velcro in the pockets that hold the retention straps. The holster comes configured for right handed use on your right side. For left handed use on the left side switch the retention straps around and move the metal clip to the other side. The easiest way to remove the metal clip from the webbing is by using a butter knife to gently ease and pry the webbing over the hooked bottom part of the metal clip. We’ll be happy to switch the holster to left handed use before we send it to you. Please send us a message if you want us to do that for you.

• Made in the USA, custom tailored for the Beretta 3032 Tomcat. Our premium OWB (outside the waistband) holsters are precision stitched using military grade poly-thread and heavy duty nylon. The holster is engineered with a soft inside lining that will save the finish on your firearm even with repeated use (kydex and leather holsters will damage your gun finish over time). The holster has thin padding to give your gun a nice, tight fit in the holster.
• Thumb break retention strap allows you to quickly draw your gun, but keeps somebody else from grabbing your gun. The thumb side is made from strong plastic allowing your thumb to easily break the retention and draw the gun in one quick, fluid motion. Other holsters made from kydex or plastic that don’t use a retention strap run the risk of an attacker being able to grab your gun. Stay safe with active retention.
• The holster comes with a belt loop and a metal clip. You can use either to attach the holster to your pants. The metal clip is heat treated for strength. Holster is ambidextrous and can be used for right handed or left handed use. It comes configured for right handed use. If you want us to switch it to left hand before we ship please contact us and let us know.
• Spare magazine pouch on the front of the holster. Please note this holster is primarily designed for open carry.
• The Beretta 3032 Tomcat has a sharp front sight that will tear most nylon holsters. We line the inside leading edge of the holster with leather which keeps the holster from tearing, ensures a smooth draw, and provides excellent friction retention. Free Shipping - 100% satisfaction guarantee with 30 day returns.

Product description

This IWB concealment holster is made in the USA to fit the Smith & Wesson - S&W M&P Shield 380 EZ with 3.68" barrel. The holster is ambidextrous but comes configured for right handed use in the middle of the back. To switch the holster to left handed use, or for right handed use on the right side you can switch the metal clip to the other side of the holster. Remove the metal clip by using a butter knife to gently pry the webbing over the bottom hooked part of the metal clip and then slide the clip off. We’ll be happy to switch the metal clip for you before we send your holster. If you want us to switch it for you, please send us a message letting us know. Nylon holsters are more comfortable for inside the waistband carry than plastic or kydex holsters. Our IWB holsters have a cotton inside lining that that protects the surface finish of your gun, unlike leather or plastic holsters that will damage your gun’s finish. Our holsters have an extremely quick draw with a strong metal clip that keeps the holster firmly in place when drawing your gun. The narrow profile of the holster allows for deep concealment.

• Made in the USA, custom tailored for the Smith & Wesson - S&W M&P Shield 380 EZ with 3.68" barrel - Our IWB (inside the waistband) holsters are precision stitched with military grade poly-thread and the highest quality American made nylon and cotton.
• Engineered with a soft but strong cotton inside lining. This will save the finish on your firearm even with repeated use (kydex and leather holsters will damage your gun finish over time).
• Nylon holsters are more comfortable than kydex, plastic, or leather. Nylon is breathable and doesn’t pinch when worn inside the waistband. The holster is slender, allowing for deep concealment and maximum comfort.
• Heat treated metal clip holds strong and keeps the holster securely in place during a fast draw. The clip is reversible which allows carry in any position around your waistband including middle of back, right handed or left handed side, appendix carry, or 4 O’ Clock. Holster comes configured for right handed use in the middle of the back. The clip will fit up to a 2” belt.
• Free Shipping - 100% satisfaction guarantee with 30 day returns. This holster will not fit if you have a laser or tac light attachment on your gun.

User questions & answers

Product description

ELVO UNIVERSAL IWB HOLSTER FOR CONCEALED CARRY



THE QUALITY



ELVO Inside The Waistband (IWB) Gun Holster made by remium, durable, soft & breathable neoprene inner material help to solve with the muggy issue, soft and breathable allows to wear directly against your skin; 900D nylon wraps the holster inside to prevent tearing with use.



RIGHT OR LEFT HAND DRAW



ELVO IWB holster have right hand draw and left hand draw. You can choose it according to your habit.



SECURITY



This low profile holster can be used as your primary EDC rig or simply a back-up to your primary weapon. Equipped with a strong retention strap and QUICK-RELEASE THUMB-BREAK Button. Includes an extra-thick rail guard for EXTENDED HOLSTER LIFE and protection from “Sight Rub.”



UNIVERSAL



The holster not only is suitable for subcompact and compact but also suitable for medium and large guns.



FITS



Fit Glock 17 22 19 23 26 27 29 42 43 34 Glock 35, S&W M&P Shield 9mm M&P Bodyguard 380 M&P9 M2.0 M&P40 M2.0 S&W SD9, Sig Sauer P226 P229 P238 P938 P365, P220 P320, P210 SP2022 Sig LEGION and Sig 1911 series, Beratta 92X PX4 APX 92G, Springfield XD XD-M XD-S XD-E 911 and 1911 SERIES, Taurus 92 G2c G2s G3 TH40 TH9 TX22, Walther PPK 380 CCP Creed PPS PPQ, Ruger LCP, EC9s LC9s LC380, SR1911, Kimber Solo Kimber Micro 9, Kel-Tec P-11, Hi Point 9mm Heckler and Koch P30SK, Kahr PM9, FNS-9 Compact, Subcompact



FEATURES



✔ Universal Fit For More Firearm



✔ Conceal Easily With Low Profile, No-Print Design



✔ Premium Neoprene



✔ FAST-DRAW Design



PACKAGE INCLUDES:



2 x Holster

• ✔ FLEXIBLE CARRY CONCEALED OPTIONS: ELVO Universal Holsters is versatile and has different carry options, inside the waistband, outside the waistband, on hip, behind hip, cross draw, appendix. ELVO IWB holster have right hand and left hand. You can choose it according to your habit.
• ✔ FITS ALL GUN SIZES: ELVO Universal Concealed Carry Holster naturally fit subcompact, compact, FITS GLOCK 17, 19, 26, 27, 29, 30, 39, 28, 33, 36 | M&P Shield in 9mm, .40, and .45 ACP | Ruger LC9 | Taurus Slim Line, PT111 | Springfield XD Series | Beretta | Bersa | Kahr Arms | Colt | Walther | and many more Compact Pistols.
• ✔ QUICK DRAW AND NO PRINTING: Allows you to flick up the retention strap with the back of thumb to draw the firearm quickly and effectively. Also, you can walk, jump, work out, and even run with this IWB holster's sturdy metal belt clip without any movement of your firearm. The sleek design of this holster allows you to carry concealed discreetly with no possibility of firearm showing through your pants (printing).
• ✔ COMFORTABLE CARRY: Premium, durable, soft & breathable neoprene inner material help to solve with the muggy issue, soft and breathable allows to wear directly against your skin; 900D nylon wraps the holster inside to prevent tearing with use.
• ✔ PACKAGE INCLUDED: 2 x ELVO IWB Holsters

User questions & answers

Product description

This is a traditional styled shoulder holster featuring a wide stay flat shoulder pad constructed of two layers of Cordura, laminated and edgebound for stability and comfort. The holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, a tie-down strap to attach to the belt and is fully lined. The harness offers four way size adjustment for a perfect fit with no binding under the arms or behind the neck. The offside strap is constructed of a soft nylon for all day comfort. There is no irritating velcro or elastic used in the harness. This is an extremely comfortable and concealable shoulder holster. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.

• nylon
• Made in USA
• Shoulder Holster for the Hi Point 380 & 9mm
• Only for the Hi Point Models C9 and CF380, No Other Hi Point Models will Fit
• Holster is fully lined and includes a belt tie-down strap
• 4 Way Size Adjustment to Avoid Underarm Binding
• Right Hand Wear - Horizontal Carry

User questions & answers

Product description

Barsony 6 Position Ambidextrous Concealment Pancake Holster. WEAR IT: - STRONGSIDE, right or left hand draw, - CROSS DRAW, right or left hand draw, - SMALL OF THE BACK, right or left hand draw (6 positions total)! It rides high so your jacket or shirt will completely conceal it. Precision stitching, lightweight and made in the USA. Accepts belts up to 1 3/4" width. Great concealment holster; flattens profile against side. Velcro adjustable retention strap and thumb break; reversible for ambidextrous use.

• Barsony 6 Position Ambidextrous Concealment Pancake Holster. WEAR IT: - STRONGSIDE, right or left hand draw, - CROSS DRAW, right or left hand draw, - SMALL OF THE BACK, right or left hand draw (6 positions total)!
• It rides high so your jacket or shirt will completely conceal it. Precision stitching, lightweight and made in the USA.
• Accepts belts up to 1 3/4" width. Great concealment holster; flattens profile against side.
• Velcro adjustable retention strap and thumb break; reversible for ambidextrous use.
• Barsony New Desert Sand 6 Position Ambidextrous Pancake Holster is compatible with the gun make/model sizes listed in the drop down menu.

User questions & answers