11 best federal shoulder holster
A federal shoulder holster is a type of gun holster designed for concealed carry of a firearm, typically worn under clothing with the firearm positioned on the shoulder. These holsters are popular among law enforcement officers and civilians who need to carry a concealed weapon discreetly.Here are some key features and aspects related to federal shoulder holsters:
Concealed Carry: Federal shoulder holsters are specifically designed for concealed carry. They allow the wearer to hide a handgun under their clothing, making it less visible to others.
Shoulder Harness: The holster consists of a harness that wraps around the shoulders, similar to a backpack. The firearm is secured in a horizontal or vertical orientation on one side of the harness, usually under the non-dominant arm.
Comfort: These holsters are designed for comfort during extended periods of wear. They often have padded shoulder straps and adjustable features to ensure a snug and comfortable fit.
Accessibility: Federal shoulder holsters are known for providing quick and easy access to the firearm. With a simple motion, the wearer can draw the weapon from the holster.
Firearm Compatibility: These holsters are typically designed to accommodate specific firearm models or sizes. It's important to choose a holster that matches the firearm you intend to carry.
Concealment Garments: To effectively conceal the firearm, individuals often wear loose-fitting or concealing clothing over the shoulder holster.
Retention Mechanisms: Federal shoulder holsters usually include retention features such as straps, snaps, or thumb breaks to secure the firearm in place and prevent accidental discharge.
Versatility: Some federal shoulder holsters come with additional magazine pouches or accessory pockets, allowing the wearer to carry spare magazines or other items.
Law Enforcement Use: Law enforcement officers, particularly detectives and undercover agents, may use federal shoulder holsters to carry concealed firearms while maintaining a professional appearance.
Training: Proper training and practice are essential when using any concealed carry holster to ensure safe and effective firearm handling.
It's important to note that laws and regulations regarding concealed carry vary by location, so individuals should be aware of and comply with local, state, and federal laws when using federal shoulder holsters or carrying firearms in any manner. Additionally, the choice of holster should align with personal preferences, comfort, and firearm requirements.
Below you can find our editor's choice of the best federal shoulder holster on the market
Federal Shoulder Holster for Springfield XDs & XDe 3.3" Barrel Without Laser or Light, 9mm & 45 Very Compact with Double Mag Pouch
Federal
Product description
This is a brand new holster from a USA manufacturer. This is the shoulder holster you have always wanted. It features wide stay flat shoulder pads constructed of two layers of Cordura, laminated and edgebound for stability and comfort. These pads won't bunch up and are very thin, flat and suitable for wear under any clothing. Each holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, adjustable tie-down straps to attach to your belt and is fully lined. The harness offers six way size adjustment for a perfect fit with no binding under the arms or behind the neck. The harness straps are constructed of a fine knit patented nylon webbing for all day comfort. There is no annoying elastic or velcro used in the harness and size adjustment is quick and easy. A double magazine pouch, also with tie-down straps is standard. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- nylon
- Made in USA
- Shoulder Holster for Springfield XDs & XDe Pistols without Laser or Light - Horizontal Carry
- This Holster is Very Close Fit to the XDs & XDe 3.3" Barrel - Not Recommended for Other Barrel Lengths or Makes and Models
- Six Way Size Adjustment - Dual Stay-Flat Shoulder Pads
- Double Magazine Pouch
- Belt tie-down straps - Snap Release Thumb-break
User questions & answers
| Question: | I have an XD9 sub compact, will it work with this model |
| Answer: | So did the holster for the xd9 sub compact ever come out? How do I find it? |
| Question: | i have a springfeild armory xds 40 cal 3.3 sub compact with a crimson trace laser n light combo installed wipl this fit in the pouch |
| Answer: | I currently own an XDs 40. So I will repeat the OP question. Will this holster fit? I'm assuming yes since you claim it fits both 9mm and .45. |
| Question: | Will this work with a Glock 27 size pistol |
| Answer: | No, it will not and we do not have anything for that size. Thanks. Paul |
| Question: | Does this fit XD mod |
| Answer: | Hi. This is for the XDs model only. The Mod 2 double stacked magazines will not fit into the magazine pouch with this shoulder holster.Thanks. |
Federal Vertical Shoulder Holster for 2" 5 Shot Revolvers
Federal
Product description
This is a traditional styled shoulder holster featuring a wide stay flat shoulder pad constructed of two layers of Cordura, laminated and edgebound for stability and comfort. The holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, a tie-down strap to attach to the belt and is fully lined. The harness offers four way size adjustment for a perfect fit with no binding under the arms or behind the neck. The offside strap is constructed of a soft nylon for all day comfort. There is no irritating velcro or elastic used in the harness. This is an extremely comfortable and concealable shoulder holster. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The Cordura nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- Vertical Carry Shoulder Holster for 2" Small Revolvers - Right Hand Wear - 38 Special
- NOT DESIGNED FOR HAMMERLESS OR SHROUDED HAMMER MODELS
- Holster is fully lined and includes a snap-release tie-down strap
- Sturdy Nylon Construction with Four Way Size Adjustment
- Wide Stay Flat Shoulder Pad - Snap Release Thumb-break Strap
User questions & answers
| Question: | How well would a colt 38 detective special fit this holster |
| Answer: | It is water resistant |
| Question: | Will a Taurus Public Defender with a 2" barrel fit |
| Answer: | The backpack itself is a pretty good size. I would say yes. |
| Question: | Anyone try the belt loop toward the back rather than straight down so the holster stays tighter to your body |
| Answer: | Yes it will |
| Question: | Will it work with a ruger 380 lcp |
| Answer: | I bought 2 of these backpacks 1 for each of my grandsons. The oldest is going into the 7th grade and the other is in the fifth grade. Their Dad picked these for them. |
Federal Scope Shoulder Holster 7 1/2" - 8 1/2" Barrels Bandolier Style
Federal
Product description
This is a brand new holster from a USA manufacturer. This is a bandolier styled shoulder holster for the hunter or outdoorsman who wants to carry a handgun outside the clothing in an easily accessible front or side position. This holster features a camoflage exterior and our custom fit interior design. It includes a thumb break, fully adjustable shoulder strap and a 1" belt to secure the holster at the waist. Our unique buckle arrangement allows the holster to be positioned across the chest or under the arm for maximum comfort. The camouflage pattern you receive may not be the same as that shown.
- nylon
- Made in USA
- Bandolier Style Allows Multi Point Wear
- Camoflage Exterior and Soft Nylon Interior
- Includes 1" Belt to Secure Holster in Position
- Adjustable Removable 64", 1 1/2" Wide Shoulder Strap
- Snap Style Thumbreak Retaining Strap
User questions & answers
| Question: | I have 45 caliber pistol well it fit |
| Answer: | It will not fit the Public Defender. Use this link instead: http://www.amazon.com/dp/B00FARGZXO?ref=myi_title_dp Thanks. Paul |
| Question: | Greetings, anyone have some pictures with pistols in holster? Thanks |
| Answer: | I don’t need that to be that tight I feel comfortable enough |
| Question: | Will x frame SW 500 with ultra pan red dot 8 1/2 barrel |
| Answer: | The pocket is bigger then I need for a Kel Tec 380 P-3at, but does work. ... You wont know how the whole assembly hangs on you body until you set it up , adjust it, and wear it for a few days.... Shoulder holsters are an odd thing.... don't work for everyone. |
| Question: | Is this available in lefty? If not,does anyone know of a mfg that makes a similar holster in a left hand model |
| Answer: | This is not a leather backpack. |
Federal Shoulder Holster for Glock 17,22,31,37, Dbl Mag Pouch Vertical Carry
Federal
Product description
This is a brand new holster from a USA manufacturer. This is the shoulder holster you have always wanted. It features wide stay flat shoulder pads constructed of two layers of Cordura, laminated and edgebound for stability and comfort. These pads won't bunch up and are very thin, flat and suitable for wear under any clothing. Each holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, adjustable tie-down straps to attach to your belt and is fully lined. The harness offers six way size adjustment for a perfect fit with no binding under the arms or behind the neck. The harness straps are constructed of a fine knit patented nylon webbing for all day comfort. There is no annoying elastic or velcro used in the harness and size adjustment is quick and easy. A double magazine pouch, also with tie-down straps is standard. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- nylon
- Made in USA
- Vertical Carry for the Glock 17, 20, 21, 22, 31 &37
- This Item is for Glock Style Full Sized Frames with 4" - 5" Barrel, We Do Not Recommend for Other Sizes & Styles
- Six Way Size Adjustment - Right Hand Wear
- Reinforced Snap-style Thumbreak Strap
- Adjustable belt tie-down straps
User questions & answers
| Question: | Will this fit a glock |
| Answer: | no pic's |
| Question: | will a rock island 1911 fit in it |
| Answer: | Sorry, although we have not tried it, I don't think the extra overall length in the 500 will fit.ThanksPat |
| Question: | Do I have to remove my belt to attach the holster |
| Answer: | This bandolier style shoulder holster can be worn either on the left or right side of the body.Thanks. |
| Question: | Will a glock 26 and a 30 fit |
| Answer: | I have taurus snup, model 85 polymer fits very well |
Federal Shoulder Holster for Taurus 44 & 357 Large Frame Revolvers 6 1/2" Barrel
Federal
Product description
This is a traditional styled shoulder holster featuring a wide stay flat shoulder pad constructed of two layers of Cordura, laminated and edgebound for stability and comfort. The holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, a tie-down strap to attach to the belt and is fully lined. The harness offers four way size adjustment for a perfect fit with no binding under the arms or behind the neck. The offside strap is constructed of a soft nylon for all day comfort. There is no irritating velcro or elastic used in the harness. This is an extremely comfortable and concealable shoulder holster. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- Taurus 357 & 44 Mag 6 1/2" Revolvers
- Models 44SS6 & 608SS6
- 4 Way Size Adjustment - Wide Stay Flat Shoulder Pad
- Vertical Carry
- Belt Tie-Down Strap
User questions & answers
| Question: | Do you have anything like this for a small frame revolver like the Heritage Rough Rider |
| Answer: | Unsure, but check your rock island 1911 specs/measurements compared to my Glock 20 (10 MM). My Glock fits tightly WITHOUT lazar sight or tactical barrel light. If you employ either of those attachments, you'll need a holster with a much larger bottom end on the holster. |
| Question: | Will this work for an 1873 saa colt with a 5.75” barrel |
| Answer: | No, the tie-down straps will run under your belt.ThanksPat |
| Question: | Will this fit a desert eagle 6 inch barrel |
| Answer: | I don’t know about a 26 or 30 but a 22 fits great. Hope this helps |
| Question: | Will this fit a single action .357 revolver |
| Answer: | It fits my 44 with 8 3/8” barrel very well. It depends on your barrel length. |
Vertical Shoulder Holster for 4" Barrel Revolver in 38 & 357 fits S&W, Ruger,Taurus Most Others
Federal
Product description
This is a traditional styled shoulder holster featuring a wide stay flat shoulder pad constructed of two layers of Cordura, laminated and edgebound for stability and comfort. The holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, a tie-down strap to attach to the belt and is fully lined. The harness offers four way size adjustment for a perfect fit with no binding under the arms or behind the neck. The offside strap is constructed of a soft nylon for all day comfort. There is no irritating velcro or elastic used in the harness. This is an extremely comfortable and concealable shoulder holster. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- Vertical Carry Shoulder Holster for 6 & 7 Shot, 4" Barrel Revolvers in 38 & 357 Most Makes & Models WITHOUT SCOPE
- WILL NOT FIT REVOLVERS WITH SCOPES AND EXTRA TALL FRONT SIGHTS - NO LASERS
- STANDARD FRAME MEDIUM & LARGE 38 & 357 REVOLVERS ONLY
- Wide Stay Flat Shoulder Pad -Vertical Carry - Right Hand
- Snap-release thumb-break retaining strap
- Built-in Holster Tie Down Strap
User questions & answers
| Question: | does this fit hk vp |
| Answer: | The holster is great for 6 1/2 inch barrel. A 5.75 inch will definitely have room, the size of the frame depends on secure placement. |
| Question: | Will this work for a .32 H&R Mag double action revolveron revolver |
| Answer: | No, this will not fit a Desert Eagle. Here is a link for you: http://www.amazon.com/dp/B00480WWRW |
| Question: | Will this item hold a 357 Magnum Smith & Wesson 4 and 1/4 inch barrel |
| Answer: | That’s the exact revolver that I have and that I use the shoulder harness for. Works perfect. |
| Question: | Can it be used for left handers |
| Answer: | The 4" barrel Glock 44 is a little shorter than this holster for the Glock 17, but should work fine for the Glock 44. Thanks. Paul |
Shoulder Holster for Colt 45 1911 Style Pistols - 4"-5" Barrel, Double Magazine Pouch, Most 1911 Frame Pistols Without Laser
Federal
Product description
This is a brand new holster from a USA manufacturer. This is the shoulder holster you have always wanted. It features wide stay flat shoulder pads for stability and comfort. These pads won't bunch up and are very thin, flat and suitable for wear under any clothing. Each holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, adjustable tie-down straps to attach to your belt and is fully lined. The harness offers six way size adjustment for a perfect fit with no binding under the arms or behind the neck. The harness straps are constructed of a fine knit patented nylon webbing for all day comfort. There is no annoying elastic or velcro used in the harness and size adjustment is quick and easy. A double magazine pouch, also with tie-down straps is standard. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- nylon
- Made in USA
- Full Size (4" - 5" Barrel) Colt 45 1911 Style Pistols - Springfield, Kimber,Sig,Rock Island,Similar, WITHOUT LASER
- The Holster and Mag Pouch May Be Reversed for Ambidextrous Use. Double Mag Pouch Cut for 7-9 Round Single Stack Mags
- Narrow Holster Specifically for the 1911 Frame without Laser - Will Not Fit Most Other Large Auto Frames
- WILL NOT FIT Compact Autos such as the Shield,LC9 or COMPACT 9MM - Snap Release Thumb-break Strap - Very Fine Knit Nylon Harness
- 6 Way Size Adjustment - Replica Gun Not Included
User questions & answers
| Question: | will it fit a person 6 ft 300 pounds |
| Answer: | From the picture it should fit but if is not made of leather it may be heavy on your shoulder. I have a custom leather rig that I carry my 686 4 inch barrel in. |
| Question: | Will this fit rock island m1911 a1 fs |
| Answer: | No, it cannot. Sorry but we are out of the left hand model. |
| Question: | Can this hold an M88 A |
| Answer: | Sorry, we do not. |
Federal Vertical Shoulder Holster for 2 1/2" - 3" Judge Public Defender
Federal
Product description
This is a traditional styled shoulder holster featuring a wide stay flat shoulder pad constructed of two layers of Cordura, laminated and edgebound for stability and comfort. The holster includes a reinforced thumb break, a poly sight channel for an easy draw, a tie-down strap to attach to the belt and is fully lined. The harness offers four way size adjustment for a perfect fit with no binding under the arms or behind the neck. The offside strap is constructed of a soft nylon for all day comfort. There is no irritating velcro or elastic used in the harness. This is an extremely comfortable and concealable shoulder holster. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- nylon
- Made in USA
- Fits Judge Public Defender with 2 1/2" - 3" Barrel - Will Not Fit the Polymer Model
- Vertical Carry - Right Hand
- Includes Thumbreak and Holster Tie-Down Strap
- 4 Way Size Adjustment
- Wide Stay Flat Shoulder Pad
User questions & answers
| Question: | Do y'all make this for my 6 1/2 " bbl "judge |
| Answer: | Sorry but there is not. Thanks. Paul |
| Question: | Looking for setup for sig p |
| Answer: | No, it will not fit the P365, the holster is too large. I don't have one to recommend at this time. Thanks. Paul |
| Question: | Will this holster cause rust overtime |
| Answer: | Yes, this will fit your Shield with Crimson Trace under barrel laser. Thanks. Paul |
| Question: | will it fit a 3'' with under barrel rail |
| Answer: | I HAVN'T SET MINE UP YET BUT IT WILL FIT...THERE ARE SO MANY AJUSTMENT STRAPS, A SNAP IF TWO PEOPLE DO IT...YOU PUT IT ON AND LET A FRIEND CINCH UP ALL THE STRAPS TO FIT...PIECE OF CAKE. |
| Question: | Will this fit a canik tp9sa 9mm |
| Answer: | Yes it will fit any 5 in 1911 45. |
| Question: | Is there a left handed version of this holster |
| Answer: | Hi. The M88A has about a 3 3/4" barrel so this holster will be a little large for that pistol. If that is a concern I would recommend this link for a slightly smaller pistol: http://www.amazon.com/dp/B00A7EPLQC?ref=myi_title_dp Neat little gun. Thanks. Paul |
| Question: | Will this fit my p |
| Answer: | No, the shape is too different from the VP9. |
| Question: | will this fit the m&p 9mm shield m 2.0 with integrated crimson trace sight |
| Answer: | I have a John Wayne .32 H&R ! It fits mine well ! |
Federal Scope Shoulder Holster Thompson Contender 14" - 16"
Federal
Product description
This is a brand new holster from a USA manufacturer. This is a bandolier styled shoulder holster for the hunter or outdoorsman who wants to carry a handgun outside the clothing in an easily accessible front or side position. This holster features a camoflage exterior and our custom fit interior design. It includes a cover, fully adjustable shoulder strap and a 1" belt to secure the holster at the waist. Our unique buckle arrangement allows the holster to be positioned across the chest or under the arm for maximum comfort. The camoflage pattern may differ from the one shown.
- nylon
- Made in USA
- Bandolier Style Allows Multi-Point Wear
- Ambidextrous with Flap Cover
- Includes 1" Belt to Secure Holster in Position
- Will Not Fit Thompson Encore Pistols
- Reversible, Removable Flap Cover
User questions & answers
| Question: | Will this fit a heritage rough rider 22 revolver with a 16 inch barrel |
| Answer: | Sorry, we are currently out and will not have more in stock for a week or ten days. Thanks. |
| Question: | Will this fit a 10" barrel TC with scope |
| Answer: | I have had this holster about 1 year and have had no problems . But with all my guns when I come home I wipe them down with a clean cloth before I put them away. |
| Question: | Will this holster fit a traditions trapper flintlock pistol (p1090) that has a 9.75" barrel and is 15.5" overall |
| Answer: | I use a 38 spec.revolver 6 rounds 3 in barrel I have no problems fits nice. Don't think it will work with rail |
| Question: | Wher can i get a holster for the vortek .50 cal. with double ring scope |
| Answer: | Hi. The SA is the full sized model and won't fit this holster very well, if at all. Here is a link that will fit your SA very well: http://www.amazon.com/dp/B008KNM5CK?ref=myi_title_dp Thanks. Paul |
Federal Shoulder Holster for Ruger GP100, 4" Barrel with Double Speedloader Pouch
Federal
Product description
This is a brand new holster from a USA manufacturer. This is the shoulder holster you have always wanted. It features wide stay flat shoulder pads constructed of two layers of Cordura, laminated and edgebound for stability and comfort. These pads won't bunch up and are very thin, flat and suitable for wear under any clothing. Each holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, adjustable tie-down straps to attach to your belt and is fully lined. The harness offers six way size adjustment for a perfect fit with no binding under the arms or behind the neck. The harness straps are constructed of a fine knit patented nylon webbing for all day comfort. There is no annoying elastic or velcro used in the harness and size adjustment is quick and easy. A double speedloader pouch, also with tie-down straps is standard. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- Shoulder Holster for 4" Barrel GP100 Revolver - Made in the USA since 1990
- Vertical Carry - Right Handed Wear
- Double Speedloader Pouch - Dual Stay-flat Shoulder Pads
- 6 Way Size Adjustment including Belt Tie-Down Straps
- Snap-release thumb-break retaining strap
User questions & answers
| Question: | Will it securely fit an s&w k frame with a 4" barrel |
| Answer: | I am not familiar with the TC, but I have a CVA Optima V2 pistol which has a 14” barrel and is about 18” overall. It is mounted with a regular pistol scope and it fits great. |
| Question: | Would this fit a rock island .38 special 4" barrel |
| Answer: | Since I don't have your exact gun it would be impossible for me to know 100% if it will fit in this holster. What I can tell you is my CVA is 19" overall and has a scope attached to it and it fits fine. I couldn't imagine your flintlock being too big or bulky for this holster. |
| Question: | Can i get a better picture of the speedloader pouches |
| Answer: | This holster holds my 12" .357 with red dot very nicely. You don't mention your barrel length but unless the gun plus scope is taller than 6-8 inches, this is big enough |
| Question: | Will it fit Ruger super Blackhawk 4 inches |
| Answer: | Here is a link for you. http://www.amazon.com/dp/B075ZDHTQS?ref=myi_title_dp Thanks. Paul |
Federal Shoulder Holster for Springfield XD 4" Barrel - 9mm, 40 or 45 Dbl Mag Pouch
Federal
Product description
This is a brand new holster from a USA manufacturer. This is the shoulder holster you have always wanted. It features wide stay flat shoulder pads constructed of two layers of Cordura, laminated and edgebound for stability and comfort. These pads won't bunch up and are very thin, flat and suitable for wear under any clothing. Each holster includes a reinforced thumb break, a polyslide sight channel for an easy draw, adjustable tie-down straps to attach to your belt and is fully lined. The harness offers six way size adjustment for a perfect fit with no binding under the arms or behind the neck. The harness straps are constructed of a fine knit patented nylon webbing for all day comfort. There is no annoying elastic or velcro used in the harness and size adjustment is quick and easy. A double magazine pouch, also with tie-down straps is standard. The holster is constructed using only top grade, new materials, and no surplus automotive foams, fillers or liners. The nylon exterior provides resistance to scuffs, abrasions and moisture. The interior features a smooth nylon lining and a closed cell foam moisture barrier. It is sewn using nylon thread and edgebound with nylon binding tape using double needle stitching to provide about 14 stitches per inch reinforcement. The combination of materials and hand finishing provides a strong, good looking, long wearing holster.
- nylon
- Made in USA
- Springfield XD Shoulder Holster with Double Magazine Pouch
- This Item is for XD Style Full Sized Frames with 4" - 5" Barrel, We Do Not Recommend for Other Sizes & Styles
- Six Way Size Adjustment - Ambidextrous - Horizontal Carry
- Dual Stay-Flat Shoulder Pads
- Belt tie-down straps
User questions & answers
| Question: | Does this fit Ruger P series |
| Answer: | It's perfect for S&W .357 L frame model 681 w/ 4" barrel. The Rock Island M200 appears to be similar in size. Hope that helps. |
| Question: | Can a woman wear this |
| Answer: | Sorry, I do not currently have one. Thank you. Paul |
| Question: | Will this fit a Springfield xd 9mm 5 inch barrel |
| Answer: | I think it would fit. I got my holster for my .38 Charter Arms 4 inch and it's a little loose. |
| Question: | How large (size) of a man will the shoulder accomodate up to? i wear a 2xl-t size shirt, so i don't want a rig designed to fit tiny tim |
| Answer: | I think the gun will fit in the holster but will likely be a little loose because of the small 22 frame size. Thanks. Paul |
Latest Reviews
View all
Shower Panels
- Updated: 31.05.2023
- Read reviews
Spring Skiing
- Updated: 06.03.2023
- Read reviews
Ski Gloves For
- Updated: 11.07.2023
- Read reviews
Travel Bottles For Dogs
- Updated: 13.01.2023
- Read reviews
Magic The Decks
- Updated: 21.07.2023
- Read reviews