16 best concealment express holster

Product description

All-Gel Toe Cap instantly absorbs pressure and friction to help prevent and ease pain from ingrown nails, corns, hammer toes, blisters and more. Stretches to fit any toe. Comfort vent at tip allows skin to breathe. Our exclusive Visco-GEL surrounds the toe while it releases mineral oil and vitamin E to soothe, soften, and moisturize skin. Great for fingers too! Washable and effective for weeks.

• All-gel design of soft vitamin-enriched m+gel to soften, soothe and protect skin
• Superior cushioning, protection and relief for corns, calluses, hammer toes, nails and cuticles
• Thin side walls, thicker at distal end
• Country of origin is United States

User questions & answers

Question:	Can you reuse these
Answer:	Yes. It is compatible with all 9Volt Medela Pumps.
Question:	how many in a box
Answer:	No, this is intended for use only with our 9V breast pumps like our Pump in Style Advanced. Our Symphony Vehicle Lighter Adapter (Item# 67173) would be needed for use with the Symphony. Please feel free to chat with us on our website if you have any further questions. Have a great day!
Question:	Can this be worn at night while sleeping
Answer:	I believe (and I am by no means an electrician)...that the 9v applies to your pump...not your car. Under the knob that turns on your pump...it will say how many volts. You are not to exceed that when it comes to the plug. The larger end of the lighter adapter is usually a device that converts the current so that your 12v car will not fry your 9v pump. Or something to that extent. Either way....this is what I use...and I have had no problems. A little "google" research might help. I do believe that I read this somewhere back in the day when I first purchased mine because I remember reading that it does increase the speed and suction a bit, but that it is ok to use.
Question:	will these hold up for my daughter who a competitive swimmer who recently had her toe nail removed
Answer:	Type in madela tubes for breast pump and do the same with the membranes. I ordered some replacement parts recently that worked fine. Really cheap too.

Product features

Why Purchase from PediFix When Others Look the Same, for Less?

Recognized brand among foot care experts – Podiatrists and Orthopedists. Why? Superior anatomical designs, materials, craftsmanship and product effectiveness.

We are a 5th generation family of foot specialists since 1885 with a mission of helping others relieve their foot pain and maintain a higher quality of life.

We mix our Gel in the United States to assure safe ingredients we choose, including USP mineral Grade Mineral Oil that diffuses onto skin.

We’re an American company backed by knowledgeable, USA-based support.

Your feet are worth the extra effort. Your feet are worth the difference in quality. Simply put, you and your feet are worth it!

Visco-GEL Toe Cap

Surround toes with soft Gel protection. Thin side wall design takes up less space in shoes, 'Comfort Vent' for breathability, extra padding for toe-tip protection. Relieves pain from corns, 'hammer' and crooked toes, ingrown nails, more.

• Surrounds, Cushions Entire Toe
• Absorbs Pressure & Friction
• Protects Corns, Ingrown Nails, Sore Spots
• Comfort Vent for Breathability
• Gel Softens & Moisturizes

Product description

All-Gel Toe Cap instantly absorbs pressure and friction to help prevent and ease pain from ingrown nails, corns, hammer toes, blisters and more. Stretches to fit any toe. Comfort vent at tip allows skin to breathe. Our exclusive Visco-GEL surrounds the toe while it releases mineral oil and vitamin E to soothe, soften, and moisturize skin. Great for fingers too! Washable and effective for weeks.

• First engineered toe/finger cap
• All-gel design of soft vitamin-enriched m+gel to soften, soothe and protect skin
• Superior cushioning, protection and relief for corns, calluses, hammer toes, nails and cuticles
• Thin side walls, thicker at distal end
• Comfort vent for breathability

Product description

PediFix Visco-Gel Toe Cap, Small 1 ea (Pack of 4)

User questions & answers

Question:	how do I decide on size? I only see small and large. I wear size 8 women's shoe
Answer:	I would believe so that it would work with freestyle pump as long as it's the same brand. But to be sure I would advice calling Medela customer support and confirming with them.

Product description

All-Gel Toe Cap instantly absorbs pressure and friction to help prevent and ease pain from ingrown nails, corns, hammer toes, blisters and more. Stretches to fit any toe. Comfort vent at tip allows skin to breathe. Our exclusive Visco-GEL surrounds the toe while it releases mineral oil and vitamin E to soothe, soften, and moisturize skin. Great for fingers too! Washable and effective for weeks.

• First engineered toe/finger cap
• All-gel design of soft vitamin-enriched m+gel to soften, soothe and protect skin
• Superior cushioning, protection and relief for corns, calluses, hammer toes, nails and cuticles
• Thin side walls, thicker at distal end
• Comfort vent for breathability

User questions & answers

Question:	How long and wide is this toe cap (XL size
Answer:	I would. I used the Medela steaming bags that you can get to clean the equipment. I don't steam the bottles any more though, they seemed to crack.
Question:	are they tight for big toe do they come in xlarge
Answer:	Yes, that's what i used them for.

Product features

Why Purchase from PediFix When Others Look the Same, for Less?

Recognized brand among foot care experts – Podiatrists and Orthopedists. Why? Superior anatomical designs, materials, craftsmanship and product effectiveness.

We are a 5th generation family of foot specialists since 1885 with a mission of helping others relieve their foot pain and maintain a higher quality of life.

We mix our Gel in the United States to assure safe ingredients we choose, including USP mineral Grade Mineral Oil that diffuses onto skin.

We’re an American company backed by knowledgeable, USA-based support.

Your feet are worth the extra effort. Your feet are worth the difference in quality. Simply put, you and your feet are worth it!

Podiatrists' Choice Nylon-Covered Toe Cap

Surround toes with soft foam to relieve discomfort from corns, ingrown nails, blisters and other problems. Hand-sewn nylon cover for durability and comfort. Extra toe-tip padding.

• Protects Toe Tips
• Relieves Corns, Ingrown Nails
• Relief Guaranteed
• Effective for Weeks

Product description

PediFix Visco-Gel Toe Cap, X Large 1 ea (Pack of 3)

User questions & answers

Question:	What size shoe takes extra large gel toe cap
Answer:	I'm not sure fit snugly over the toe so maybe they will
Question:	How many in a package
Answer:	These will fit the narrow neck flanges (medela and spectra compatible), but not the wide neck flanges that come with the spectra pump. I actually prefer the medela valves over the spectra duckbills, so i use the narrow neck flanges with the spectra pump. There is a long backflow protector you can buy.
Question:	How many toe caps are there per package
Answer:	I have the pump in style, but I believe all the accessories can be used between all Medela pumps so you should be fine

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO OR SLIDE MOUNTED OPTICS UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-5 to +20 Degrees) IWB KYDEX Holsters. Now Claw Compatible! Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw.

Holster Features

Claw Compatible to Minimize Printing!

Adjustable Cant (-5 to +20 Degrees)

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Belt Clip so no one knows you are Carrying

All Black Oxide Steel Hardware with Threadlock

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• INSIDE THE WAISTBAND KYDEX HOLSTER fits: Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) (ONLY unless Specified). Our minimalist IWB holsters are designed to be worn comfortably inside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed and crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all of our ho
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail), you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, b
• CLAW COMPATIBLE - ELIMINATES PRINTING: Our Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) IWB Holster is now Claw Compatible. Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body. This effectively makes your weapon disappear inside your belt line.

User questions & answers

Question:	Will this hold a ruger sr 40c? Also i have a right handed gun but would like a left handed holster will it work
Answer:	It fits my PPQ M2 9mm just fine.
Question:	Why do the details say M2 and then the answers to the question if it works with M2 is no
Answer:	Yes, all of my xd mod gen 2 fit in all of the holsters that are longer. My .45, 3.3 fits in it, so the 4in, it shouldn’t be an issue
Question:	Will this fit my XD 4.0 45acp
Answer:	This is only for the xds
Question:	Love this holster. Would this fit an xdm .45 acp (4.5 inch
Answer:	Black

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO OR SLIDE MOUNTED OPTICS UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-5 to +20 Degrees) IWB KYDEX Holsters. Now Claw Compatible! Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw.

Holster Features

Claw Compatible to Minimize Printing!

Adjustable Cant (-5 to +20 Degrees)

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Belt Clip so no one knows you are Carrying

All Black Oxide Steel Hardware with Threadlock

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• INSIDE THE WAISTBAND KYDEX HOLSTER fits: Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) (ONLY unless Specified). Our minimalist IWB holsters are designed to be worn comfortably inside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed and crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all of our ho
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail), you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, b
• CLAW COMPATIBLE - ELIMINATES PRINTING: Our Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) IWB Holster is now Claw Compatible. Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body. This effectively makes your weapon disappear inside your belt line.

User questions & answers

Question:	Will this fit the new ruger lcp ii
Answer:	Get large for the 1st (big) toe, small for any of the others.
Question:	Can i use this if i have a light/laser on the trigger guard
Answer:	Yes. Use mild soap to gently hand wash, dry & reuse.
Question:	Is this comfortable for appendix carry
Answer:	I believe this particular packaging is just one toe cap. You can buy from other companies who package in multiple caps.
Question:	Is this good for appendix carry
Answer:	I don't wear mine at night. Only during the day when I wear shoes and sneakers. I wear them all day and they are very comfortable. I'm sure you can wear them while sleeping.

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO OR SLIDE MOUNTED OPTICS UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-5 to +20 Degrees) OWB Paddle KYDEX Holsters. Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day OWB concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Designed for Hip Carry.

Features:

Adjustable Cant (-5 to +20 Degrees)

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Paddle

All Black Oxide Steel Hardware with Threadlock

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• OUTSIDE THE WAISTBAND KYDEX PADDLE HOLSTER fits: Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) (ONLY unless Specified). Our minimalist OWB paddle holsters are designed to be worn comfortably outside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your 1911 3.5" Officer (NR) (Non-Sig), you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry p
• 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery & Equipment for a level of quality that is unparalleled. Our Quality & Durability is engineered into each holster from the start. Because of this, we guarantee that your holster will last you forever no matter what.

User questions & answers

Question:	will this fit a glock 19 4.6 inch barrel with redot sight
Answer:	Yes they offer it for the Glock 19 . You can email the manufacturer for the laser fitting . I did for my S&W 380 body with laser .
Question:	Does it fit 5 inch M&p
Answer:	Thank you for reaching out to us, unfortunately that model will not fit your firearm. We do not have a holster for this model at this time, but we will do some research into adding this to our lineup. We are always adding new models consistently and we will take this one into consideration too. We appreciate you thinking of us and please check back with us for updates at any time!
Question:	Will this fit the Taurus g3c
Answer:	At this point CE does not yet have a model for the Taurus G3C... The model for the G2 will fit, albeit a little longer. p2-services.
Question:	Will it fit a Glock 26 with a red dot sight
Answer:	These holsters are designed to fit the stock firearm only. But I would check the company’s website for options, they might sell other styles that accommodate optics.

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-5 to +20 Degrees) OWB Paddle KYDEXOptics/RMR Cut Holsters. Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day OWB concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Designed for Hip Carry.

Features:

Adjustable Cant (-5 to +20 Degrees)

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Slide Mounted Optics/MOS/RMR/Red Dot Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Paddle

All Black Oxide Steel Hardware with Threadlock

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• OUTSIDE THE WAISTBAND KYDEX PADDLE HOLSTER fits: Canik TP9SA (ONLY unless Specified). Our minimalist OWB paddle holsters are designed to be worn comfortably outside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters.
• EXCLUSIVE HOLSTER FEATURES: Adjustable Cant (-5 to +20 Degrees). Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered. Undercut Trigger Guard for ease of Draw. Over-cut Open-face to Accommodate Threaded Barrels. Accommodates Slide Mounted Optics/MOS/RMR/Red Dot Sights. Full Length Sweat Guard with Rear Sight Shield. Fiber-Reinforced Stealth Paddle. All Black Oxide Steel Hardware with Threadlock. Made 100% Start to Finish in the USA by Americans using All American Ma
• ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your gun, you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry positions.
• 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery & Equipment for a level of quality that is unparalleled. Our Quality & Durability is engineered into each holster from the start. Because of this, we guarantee that your holster will last you forever no matter what.

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO OR SLIDE MOUNTED OPTICS UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-5 to +20 Degrees) OWB Paddle KYDEX Holsters. Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day OWB concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Designed for Hip Carry.

Features:

Adjustable Cant (-5 to +20 Degrees)

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Paddle

All Black Oxide Steel Hardware with Threadlock

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• OUTSIDE THE WAISTBAND KYDEX PADDLE HOLSTER fits: Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) (ONLY unless Specified). Our minimalist OWB paddle holsters are designed to be worn comfortably outside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your 1911 3.5" Officer (NR) (Non-Sig), you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry p
• 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery & Equipment for a level of quality that is unparalleled. Our Quality & Durability is engineered into each holster from the start. Because of this, we guarantee that your holster will last you forever no matter what.

User questions & answers

Question:	Does concealment express make a 365xl holster, with a cut out for the romeozero red dot
Answer:	2
Question:	Will this fit the M&p9 2.0 compact 4 inch barrel
Answer:	there are 3 per package
Question:	Will the walther ppq .40 fit the ppq
Answer:	it is about 2" long and plenty big for any big toe ive ever seen. i would advise looking into a different solution if your problem is ingrown toenails like mine. i found a manicurist who does pedicures, too and she solved my problem. this toe cap is very fragile. it tore the first time i put on it, then socks, then shoes and walked around for a few hours.....
Question:	what size belt is wearable with this holster
Answer:	Only S, M and L

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO OR SLIDE MOUNTED OPTICS UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-30 to +30 Degrees) Tuckable IWB KYDEX Holsters. Now Claw Compatible! Carry Comfortably while being able to tuck in your shirt! Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw.

Features:

Claw Compatible to Minimize Printing!

Adjustable Cant (-30 to +30 Degrees)

Adjustable Ride Height

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Belt Loop so no one knows you are Carrying

All Black Oxide Steel Hardware with Threadlock

Compatible with Optional Mounts including: Ulticlip3, Ulticlip XL, PTD Soft Belt Loop

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) (ONLY unless Specified). Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & unif
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION, RIDE HEIGHT, & CANT: When you holster your Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail), you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is adjustable, as is ride height (Standard, Shallow & Deep Conceal). Cant (Carry Angle) is adjustable from -30 to +30 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behin
• OPTIONAL ACCESSORIES - CLAW COMPATIBLE: Our Kimber, Colt, Ruger, Springfield 1911 3.5" Officer Model (Non-Rail) Tuckable IWB Holster is now Claw Compatible. Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body. This effectively makes your weapon disappear inside your belt line. Our Tuckable holsters are also compatible with the Ulticlip3 and/or Ulticlip XL, plus our Low Profile and PTD Soft Belt Loop Kits, making
• 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery & Equipment for a level of quality that is unparalleled. Our Quality & Durability is engineered into each holster from the start. Because of this, we guarantee that your holster will last you forever no matter what.

User questions & answers

Question:	Clip is metal
Answer:	I use the version of this holster made for the M&P Shield 9mm 2.0 with integrated red laser. Its a perfect fit for that pistol.
Question:	Will the laser model fit this holster
Answer:	Well, as a lefty, I find that I am most comfortable with the holster in the 9:00 o'clock position or just a little past (maybe between 8:00/9:00). I tried the appendix location but it was uncomfortable while bending or sitting down. I really feel comfortable with it.
Question:	Will this fit a Taurus
Answer:	I use this with my Springfield XD-E .45 and I can't imagine using it as anything but an appendix carry. Putting it at 3 or 9 (hips) does not make sense to me. I have tried it and appendix is the only comfortable placement. I am a skinny dude and with the claw attachment it doesn't print at all.
Question:	Will this work for a s&w m&p
Answer:	Probably is a shoe range. I wear a size 12 shoe, trim about 1/4 inch off the bottom of the extra large toe cap, and it fits perfectly.

• Eliminate Printing of your CCW with our Claw Kit
• Compatible with Concealment Express IWB & Tuckable Holsters (with 2 retention holes at 0.60" Spacing)
• Reversible (Works with both Right Hand & Left Hand Holsters)
• 100% Made in the USA - Lifetime Warranty

User questions & answers

Question:	So what exactly does this do
Answer:	You want the one that says S&W M&P 9 2.0. Unless you barrel is really 3.6" then you want the S&W M&P9 2.0 3.6"
Question:	Does the smaller claw (for use with a Sig P365) attach with a single or double bolt
Answer:	Thank you for asking! Unfortunately we do not have a holster for this model at this time, but we will do some research into adding this to our lineup. We are always adding new models consistently and we will take this one into consideration too. We appreciate you thinking of us and please check back with us for updates at any time!
Question:	How long is the claw base? Would it be too long for a Sig P238 holster
Answer:	Our paddle holster will accommodate any belt up to 2 inches wide.
Question:	Will it work with any company’s Inside the waistband holster
Answer:	NO...It will NOT fit the LCP2 / LCP-II. Unfortunately I found out the hard way after I purchased it.

Product features

The Concealment Express Claw Kit Virtually Eliminates Printing

The Concealment Express Claw Kit is designed to angle the butt of your gun in towards your body to eliminate any printing. The claw works by using your belt as a lever to angle the butt of the gun inwards. It is compatible with all 2-retention screw Concealment Express IWB & Tuckable Holsters. Each Claw Kit comes with a short & tall standoff so you can choose exactly much angle you need to work with your body.

Mounting Hole spacing is 0.60"

Product description

Our OWB KYDEX Belt Loop Holster is the ultimate pancake KYDEX holster setup. It was designed from the ground up with our exclusive Concealment Express design language and incorporating our most popular holster features, plus is Slide Mounted Optics / MOS / RMR / Red Dot Compatible. The OWB Belt Loop KYDEX holster was created to allow for comfortable OWB carry in a minimal, compact, lightweight package. Our Patent Pending custom Belt Loop design allowed us to make the holster as compact as possible without sacrificing durability or retention. Each holster is Crafted and Formed over our Proprietary, Precision Aluminum Molds. Our molds are CAD designed and milled in house so we can ensure the consistency, fit, quality, durability, lightness, comfort, uniformity of features for each and every holster we make, regardless of the gun it is for.

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO UNLESS SPECIFIED)

Features:

'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Adjustable Ride Height (Standard, Deep, Shallow)

Adjustable Cant (-15 to +15 Degrees)

Ambidextrous (Either RH or LH - Ships Setup as RH)

Fully Enclosed Trigger Guard for Maximum Safety

Works with Most Slide Mounted Optics / MOS / RMR / Red Dot Sights

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Fiber-Reinforced Stealth Belt Loops

All Black Oxide Steel Hardware with Threadlock

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

Specs:

Outside the Waistband Pancake Style Belt Loop Holster (OWB)

Strong Side (Hip) Carry (3/9 O'Clock)

Made from .08" KYDEX T

Weighs 3 Oz.

Lifetime Warranty

Made in the USA

• OUTSIDE THE WAISTBAND KYDEX BELT LOOP (PANCAKE) HOLSTER fits: Sig Sauer P365 XL (ONLY unless Specified). Our minimalist OWB Belt Loop holsters are AMBIDEXTROUS and are designed to be worn comfortably outside the waistband. We use .08” KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters.
• EXCLUSIVE HOLSTER FEATURES: Slide Mounted Optics / RMR / MOS / Red Dot Compatible. Undercut Fully Enclosed Trigger Guard protects the trigger area and also keeps the KYDEX from interfering with your draw. Over-Cut Open-Face design accommodates Threaded Barrels and clears Suppressor Height Sights. Fiber Reinforced Stealth 1.5" Belt Loops for secure OWB Carry. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• 'POSI-CLICK' RETENTION + ADJUSTABLE CANT & RIDE HEIGHT: When you holster your Sig Sauer P365 XL, you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Ride Height is adjustable via our Patent Pending Belt Loops. Cant (or Carry Angle) is also adjustable from -15 to +15 Degrees, allowing you to angle the holster perfectly for strong side (hip) carry.
• 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery & Equipment for a level of quality that is unparalleled. Our Quality & Durability is engineered into each holster from the start. Because of this, we guarantee that your holster will last you forever no matter what.

User questions & answers

Question:	do they make for shield .45, and which is most comfortable and closet to body, paddle or belt carry owb
Answer:	Unfortunately, this will not accommodate the laser. Thank you
Question:	Could the 1.5” tuckable belt loop clips be put on this holster to allow for easy on and off
Answer:	Unfortunately this model will not and we do not have a holster at this time for the Taurus 851. Please check back with us for updates. Thank you.
Question:	Is there a release on this holster
Answer:	Yes this holster will fit a m&p 340.
Question:	Will the m&p shield 2.0 .45 performance center with the red dot site fit in this holster
Answer:	Since that is a new model I am sure they do. Go directly to their website and search for it. If they don't have it they will make it soon for sure. They have holster for almost every gun on the market.

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO OR SLIDE MOUNTED OPTICS UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-30 to +30 Degrees) Tuckable IWB KYDEX Holsters. Now Claw Compatible! Carry Comfortably while being able to tuck in your shirt! Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw.

Features:

Claw Compatible to Minimize Printing!

Adjustable Cant (-30 to +30 Degrees)

Adjustable Ride Height

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Belt Loop so no one knows you are Carrying

All Black Oxide Steel Hardware with Threadlock

Compatible with Optional Mounts including: Ulticlip3, Ulticlip XL, PTD Soft Belt Loop

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SA (ONLY unless Specified). Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters.
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION, RIDE HEIGHT, & CANT: When you holster your Canik TP9SA, you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is adjustable, as is ride height (Standard, Shallow & Deep Conceal). Cant (Carry Angle) is adjustable from -30 to +30 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry positions.
• OPTIONAL ACCESSORIES - CLAW COMPATIBLE: Our Canik TP9SA Tuckable IWB Holster is now Claw Compatible. Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body. This effectively makes your weapon disappear inside your belt line. Our Tuckable holsters are also compatible with the Ulticlip3 and/or Ulticlip XL, plus our Low Profile and PTD Soft Belt Loop Kits, making these the most versatile IWB Holsters available.

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-5 to +20 Degrees) IWB Optics/RMR Cut KYDEX Holsters. Now Claw Compatible! Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw.

Holster Features

Claw Compatible to Minimize Printing!

Adjustable Cant (-5 to +20 Degrees).

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered.

Undercut Trigger Guard for ease of Draw.

Over-cut Open-face to Accommodate Threaded Barrels.

Accommodates Slide Mounted Optics/MOS/RMR/Red Dot Sights.

Full Length Sweat Guard with Rear Sight Shield.

Fiber-Reinforced Stealth Belt Clip so no one knows you are Carrying.

All Black Oxide Steel Hardware with Threadlock.

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment.

Unconditional Lifetime Warranty.

• INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SA (ONLY unless Specified). Our minimalist IWB holsters are designed to be worn comfortably inside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed and crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all of our holsters.
• EXCLUSIVE HOLSTER FEATURES: Accommodates Slide Mounted Optics/MOS/RMR/Red Dot Sights. Claw Compatible to Minimize Printing! Adjustable Cant (-5 to +20 Degrees). Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered. Undercut Trigger Guard for ease of Draw. Over-cut Open-face to Accommodate Threaded Barrels. Full Length Sweat Guard with Rear Sight Shield. Fiber-Reinforced Stealth Belt Clip so no one knows you are Carrying. All Black Oxide Steel Hardware with Threadlock
• ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your firearm you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry positions.
• CLAW COMPATIBLE - ELIMINATES PRINTING: Our IWB Holster is now Claw Compatible. Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body. This effectively makes your weapon disappear inside your belt line.

Product description

(NOT COMPATIBLE WITH ANY LIGHT/LASER COMBO UNLESS SPECIFIED)

Hand Molded, Adjustable Cant (-30 to +30 Degrees) Tuckable IWB KYDEX Holsters. Now Claw Compatible! Carry Comfortably while being able to tuck in your shirt! Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw.

Features:

Claw Compatible to Minimize Printing!

Adjustable Cant (-30 to +30 Degrees)

Adjustable Ride Height

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Belt Loop so no one knows you are Carrying

All Black Oxide Steel Hardware with Threadlock

Compatible with Optional Mounts including: Ulticlip3, Ulticlip XL, PTD Soft Belt Loop

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SA (ONLY unless Specified). Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters.
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION, RIDE HEIGHT, & CANT: When you holster your Canik TP9SA, you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is adjustable, as is ride height (Standard, Shallow & Deep Conceal). Cant (Carry Angle) is adjustable from -30 to +30 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry positions.
• OPTIONAL ACCESSORIES - CLAW COMPATIBLE: Our Canik TP9SA Tuckable IWB Holster is now Claw Compatible. Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body. This effectively makes your weapon disappear inside your belt line. Our Tuckable holsters are also compatible with the Ulticlip3 and/or Ulticlip XL, plus our Low Profile and PTD Soft Belt Loop Kits, making these the most versatile IWB Holsters available.