12 best blackhawk holster

• Built to withstand the toughest Terrain and environments
• Immediate retention and audible click upon re-holster for security
• Fits SandW 5900/4000 9/40 series including TSW
• Gunmetal gray holster body with black SERPA Auto Lock release
• Passive retention detent adjustment screw
• Immediate retention and audible click upon re-holster for security
• Includes paddle platform only

User questions & answers

Question:	Will this fit a taurus pt 111 millennium pro g
Answer:	What size did u get for the pt111 g2
Question:	Will it fit a sd9ve 9mm and is it left hand oriented
Answer:	I have the SDVE.40 and this holster (Size 25) will fit either the Smith and Wesson SDVE .40 or the 9mm. It comes in both left or right handed, and is a Level 2 Retention Holster. One note for this holster is that if you intend to use it for duty, then you will want a duty belt holder for the holster (A separate cost item.)
Question:	Will this holster work with the ruger lc
Answer:	Definitely not
Question:	Will this holster fit a s&w sw9ve
Answer:	Yes. It fits perfectly. That is the handgun it was made for. Also fits the Ruger SR series 9mm and 40.

Product features

About us

Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products. At Blackhawk, we're not just making gear; we’re honoring a vow.

About Blackhawk!

Product description

BLACKHAWK has a history in making the highest quality Tactical and outdoor gear in the world. Trusted by military, outdoorsman, and recreational users throughout the world, when you need something to work, BLACKHAWK never lets you down.

• Quality tested in the field, made of quality materials
• Built to withstand the toughest Terrain and environments
• Don't sacrifice price for quality, with Blackhawk you get what you pay for
• Fits Smith and Wesson 5946
• Flexible thigh platform conforms to leg size and Y-harness suspension system distributes weight evenly, keeps holster vertical when kneeling, and allows use of pants pocket
• Quick-disconnect swivel buckles allow superior flexibility and quick holster mounting and dismounting
• Accessory mounting locations for pouches, knives, mag cases, etc. and rubberized leg straps eliminate sliding
• Passive retention detent adjustment screw and SERPA Auto Lock release

User questions & answers

Question:	sig p229 what size to pick
Answer:	you want 06Sizing Chart: http://www.blackhawk.com/getmedia/2e1b8dba-752d-4e34-bef2-030ae5b89ceb/BLACKHAWK_Holster_Fit_Chart.aspx
Question:	What size for a Sig P
Answer:	Contact sherpa directly for more details
Question:	I looked on the Blckhawn website but didnt find accessories for this holster. I know they must have extra mag and flashlight options for this unit
Answer:	If you look for an external flashlight holster to mount on this platform, you won't find (as i know).You can buy the light-bearing holster. Here is the flashlight. Note that this is the only flashlight fitting this holster.http://blackhawk.com/Products/Accessories/Lights/Weapon.aspxHere is the mag you can attach to this platform.http://blackhawk.com/Products/Holsters-Duty-Gear/Handgun-Accessories/Cases/Injection-Molded/Tactical-Mag-Pouch.aspx
Question:	What size do I need for a full size 5" 1911? Without a rail
Answer:	Size 3 will fit the 1911. I have a full size, no rail

Product description

BLACKHAWK has a history in making the highest quality Tactical and outdoor gear in the world. Trusted by military, outdoorsman, and recreational users throughout the world, when you need something to work, BLACKHAWK never lets you down.

• Quality tested in the field, made of quality materials
• Built to withstand the toughest Terrain and environments
• Don't sacrifice price for quality, with Blackhawk you get what you pay for
• Fits SandW MandP 9/40
• Passive retention detent adjustment screw and SERPA Auto Lock release
• Thumb-activated Pivot Guard for additional security - No thumb break or awkward middle finger release to slow down your draw
• No snaps or hoods to accidentally open
• Includes angle-adjustable jacket-slot belt loop

User questions & answers

Question:	So it wont fit the p365 XL
Answer:	Please use the oil which marked 4 stroke, you can use the same 4 stroke engine lawnmower
Question:	Will this holster fit the hipoint CF380? been looking and trying to compare sizes of other guns that will match this one
Answer:	Hi, we PX-Trunk have checked twice before we pack up each package, our products are fulfilled by Amazon, so it may missing during the transport, we will send the hose to you for free, please leave your order number here, we will get in touch with you soon, or you can email us via Amazon. Thank you for purchasing from us
Question:	Will this fit the 96a1 with rail
Answer:	Dear customer, battery and charger will come with our leaf blower.
Question:	Will any glock 19 9mm any gen fit this holster
Answer:	This battery is WORTH upgraded 4.0 Ah lithium-ion battery with 84V, providing you with more powerful and full air power and wind capacity. There are three battery indicators for you to check the battery as needed.

Product features

About us

Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products. At Blackhawk, we're not just making gear; we’re honoring a vow.

About Blackhawk!

Product description

Multiple holsters for multiple handguns is no longer an Issue. The BLACKHAWK Omnivore is a Multi-Fit holster that accommodates more than 150 styles of semi-automatic handguns with an accessory rail. The active retention mechanism locks onto our proprietary rail attachment device, not the frame of the handgun. A thumb release disengages the locking mechanism when drawing the handgun. The Omnivore represents the future in retention holster technology, and delivers unparalleled firearm access.

• Multi-fit: Omnivore Holsters fit more than 150 styles of semi-automatic handguns with an accessory rail (Compatible with StreamLight TLR 1&2 light bearing)
• Active retention mechanism: ergonomic thumb-activated retention mechanism delivers instant firearm access
• Level 2 retention: uses two features to hold handgun securely in place
• Free-floating design: holster locks onto rail attachment device, doesn't wear firearm's frame and finish
• 3-position adjustable release: height of thumb-activated retention mechanism adjusts to fit your hand

User questions & answers

Question:	Does or is there any holster for glock g23 gen4 with olight baldr pl-2rl
Answer:	I use the Olight PL-PRO Valkyrie with the Blackhawk Epoch holster with my Glock 22 and have no issues. Not sure if the 23 will work though.
Question:	Does it work with a Serpa quick disconnect
Answer:	Yes. I put it on mine and I use it for duty carry.
Question:	Does it work with the a glock 22 with tlr
Answer:	If the TLR-3 light has a different shape and they are different sizes. It might "work" but there will be at least two problems using this holster for a TLR-3. The first is the size difference between the lights. The TLR-1/2 are longer. So the gun will slide further down into the holster than intended but not necessarily a huge problem. The second is the mechanism that holds the light in the holster is specifically shaped for the TLR-1/2, where it comes up at an angle, whereas the TLR-3 is flat. Like I said it might work, but I would guess that there is going to be a lot of extra movement in the holster and the retention device would wear out much more quickly just because the shapes of the lights are different where the retention is being placed.
Question:	Will this holster fit a TLR
Answer:	No

Product features

BLACKHAWK! Omnivore MultiFit Stream Light TLR 1/2 Light Bearing Holster

Multiple holsters for multiple handguns is no longer an issue. The BLACKHAWK! Omnivore multi-fit family of holsters accommodates more than 150 styles of semi-automatic handguns.

Our proprietary retention mechanism locks onto the Streamlight TLR1/2 for the light bearing models.

The instinctive thumb release disengages the locking mechanism from the Rail Attachment Device when drawing the handgun.

Quick Thumb Release

Delivers instant access to your handgun, critical in high-pressure situations.

Adjustable 3-position thumb release, customization for any hand size.

The thumb release will not engage in the firearm is being pulled on.

Free-Floating Design

Holster does not contact the frame, preventing wear on the finish.

Allows debris to fall through, without getting trapped-reducing jamming.

Extra clearance allows for easier holstering and fits a wide range of custom add-ons.

True Multi-Fit

Fits almost any semi-automatic handgun with an accessory rail.

Available in light bearing models for both SureFire and Streamlight.

Explore our unparalleled list of compatible guns.

Level 2 Retention

Locks directly to our Rail Attachment Device, not your handgun's frame.

Uses a thumb-activated retention mechanism to secure your firearm.

Superior strength to weight ratio against any other retention system.

• Made in America
• Commercial Brand: BLACKHAWK
• Gloves
• Available in Black, Coyote Brown, Foliage Green, and Olive Drab

User questions & answers

Question:	Anyone know where I can find/buy the belt loop attachment, if they're sold separately
Answer:	My experience has been positive. I find the quality of the polarized lens as good as sunglasses that cost $200,
Question:	Does this come with the actual holster or just the leg mounting hardware
Answer:	I would say, yes-slightly. Like in the picture, they are not a dark brown solid lens- however I feel like my eyes are protected from the sun.
Question:	Does this product work with the Serpa level 2 holster
Answer:	I have the ones with the pink frame and they are polarized, I think they all are
Question:	Can this be used for a left hand holster
Answer:	Yes, It works well. I use it regulaly

Product features

432000PBK Tactical Holster Platform

The Y-harness suspension system of this platform distributes weight evenly and keeps your holster vertical for a confident, consistent draw.

• Flexible thigh platform conforms to leg size
• Y-harness suspension system distributes weight evenly, keeps holster vertical and allows use of pocket
• Quick-disconnect swivel buckles for quick holster mounting/dismounting
• Rubberized leg straps eliminate sliding
• Accessory mounting points for pouches, knives, mag cases, etc.
• Requires Duty Accessory Mounting Screw Kit (sold separately) for mounting Blackhawk Duty Gear
• Accommodates Blackhawk Injection-molded concealment or duty holsters

About Blackhawk!

About Us

Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products that won’t let you down. At Blackhawk, we're not just making gear; we’re honoring a vow.

Product description

Blackhawk has a history in making the highest quality tactical and outdoor gear in the world. Trusted by military, outdoorsman, and recreational users throughout the world, when you need something to work, Blackhawk never lets you down.

• Swivel buckles on belt loops
• Fits Glock 17, 19, 20, 21, 22, 31, 32 and SandW MandP 9/40/45
• Flexible thigh platform conforms to leg size and Y-harness suspension system distributes weight evenly, keeps holster vertical when kneeling, and allows use of pants pocket
• Quick-disconnect swivel buckles allow superior flexibility and quick holster mounting and dismounting and offers accessory mounting locations for pouches, knives, mag cases, etc.
• Rubberized leg straps eliminate sliding
• Passive retention detent adjustment screw and SERPA Auto Lock release

User questions & answers

Question:	They ask what size there is no reference next to the numbers they give what size do I need for a glock 17 and
Answer:	It's not as hard as belts of law enforcement; though it's fairly flexible, the material is good and seemingly tough. Have had it for a couple months and not a scratch on it; very impressed. Should be good enough for small handgun or pistol; no cannons.
Question:	will it fit my sig p250 compact
Answer:	It tastes like beaver to me. One can't be sure though.
Question:	Will this fit a glock 20sf gen
Answer:	It is recommended that you order the next size up from your waist size. The 42 inches for a 42 size belt would measure 42" from the start of the leather (no buckle) to the center hole.
Question:	will this fit a 1911 with rail
Answer:	I would go about 46. Thankfully, this belt is fully adjustable. For selecting a belt "length" in general, the rule of thumb is to take your pant size and go up one. So if you wear a 52, you would get the belt that is listed as 54". If you wear a 42, you would go for the belt that is listed as 44".

Product description

The epoch level 3 light-bearing duty holster has a passive retention detent screw. Has the epoch auto lock thumb release and fits popular lights. Reinforces full master grip and no snaps or hoods to accidentally open.

• Manufactured by ATK

User questions & answers

Question:	Will this work with a full size MP 40 with te Streamlight tlr4light and laser combo
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } The power is too small to blow the leaves.
Question:	Will a 1911 fit in one of these
Answer:	It won't take long, maybe an hour or so to fully charge the battery.And it can last above 20 mins with the largest power.
Question:	Will this holster work with olight pl pro and glock
Answer:	Yes, it's a gas leaf blower, need gas to start the engine
Question:	Will this holster accommodate the tlr-1 hl
Answer:	This cost is charged by Amazon, you can add it into cart, then pay it, if the cost exceed your budget, you can cancel it, thank you for asking

Product description

Featuring our patented SERPA Auto-Lock technology, the SERPA CQC Concealment Holster delivers a smooth draw, easy re-holster and unparalleled handgun security in a sleek package that is perfect for concealed carry.

• Passive retention detent adjustment screw and SERPA Auto Lock release
• Reinforces full master grip and superior draw technique
• Immediate retention and audible click upon re-holster for security
• Includes belt loop and paddle platform
• This holster will not fit polymer frame Taurus Judges
• Fits Glock 19, 23, 32, and 36
• Passive retention detent adjustment screw and SERPA Auto Lock release

User questions & answers

Question:	What size fits the cz p
Answer:	Over 3 inches in lenght, almost 3/4 of an inch wide and over half an inch in height. The exact product dimensions are listed and correct on Amazon.
Question:	Anyone use this on an m9/92fs? does it work well / fit correctly
Answer:	How do I use the warranty? My blades are dull and ragged and i have old cheap Trim trimmers that have lasted for years. I do not abuse them and my nails are just barely too thick for the standard trimmers. just the nail on the big toe I bought this a year ago and i have other trimmers that have lasted for years, and those have been abused. These will not even cut fingernails anymore.
Question:	How much of the Glock 19 barrel/slide extends beyond the open end of the holster ? Thanks very much
Answer:	Yes, to attach just slide it and when it clicks you're done. Just pull when disassembling.
Question:	Will this holster accommodate raised sights for a silencer
Answer:	It is only 4lbs with battery.You can take it easily.

Product features

BLACKHAWK! SERPA CQC Concealment Holster

Featuring our SERPA Auto-Lock technology, the SERPA CQC Concealment Holster delivers a smooth draw, easy re-holster and unparalleled handgun security in a sleek package that is perfect for concealed carry.

Features

• SERPA Auto-Lock technology

• SERPA Auto Lock release

• Passive retention detent adjustment screw

• Speed-cut design for rapid draw, target acquisition and re-holster

• Includes Belt Loop Platform and Paddle Platform

• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms

• Look for our distinctive and unique L shaped button

Product description

With streamlined thumb-activated retention, the T-Series L2C, L2D & L3D keep your firearm at the ready while maintaining total security.

• Thumb-Activated Retention Follows Master Grip Principle
• Low-Friction Internal Material for Smooth and Effortless Draw
• Sound-Dampening Lining for Stealth Drawing and Holstering
• Durable Material Provides Protection with Sleek Design for Minimal Bulk
• Red Dot Compatable
• Included components: Holster, Instruction Manual, 2 Slot Belt Mount, QDR Belt Mount (Quick Dual Release)
• Sport type: Hunting

User questions & answers

Question:	Can this holster fit the Ruger Security 9 (full size
Answer:	I believe they are American designed and manufactured in China, not a cheap Chinese "knockoff". There is a difference, this is NOT a cheaply made product. I have two sets myself, straight and curved and I am very well pleased with them. They are the best I've ever owned.
Question:	will it fit M&P 2.0... 3.6 inch 9mm
Answer:	Yes. The flat edge allows sharpening with a whetstone or a flat file. IMO it won't matter, toenails are soft so wear will be minimal.

Product features

Blackhawk T-Series L2C

Thanks to a drawing motion that operates off of the Master Grip Principle, you'll be able to get into the fight under even the most stressful of circumstances. A combination of reinforced outer polymer and smooth, sound-dampening, hydrophobic lining ensures your T-Series will perform no matter the elements and situation.

SECURE

Thumb-activated retention follows Master Grip Principle

QUICK

Low-friction internal material for smooth and effortless draw

QUIET

Sound-dampening lining for stealth drawing and holstering

DURABLE

Durable material provides protection with sleek design for minimal bulk

• Multi-Fit - Omnivore Holsters Fit More Than 150 Styles Of Semi-Automatic Handguns With An Accessory Rail
• Active Retention Mechanism- Ergonomic Thumb- Activated Retention Mechanism Delivers Instant Firearm Access
• Level 2 Retention - Uses Two Features To Hold Handgun Securely In Place
• Free-Floating Design - Holster Locks Onto Rail Attachment Device, Doesn't Wear Firearm's Frame And Finish
• 3-Position Adjustable Release - Height Of Thumb- Activated Retention Mechanism Adjusts To Fit Your Hand

User questions & answers

Question:	Will it fit a Glock 19x
Answer:	Yes. Very sharp. Clean cut. Better leverage with thick handles
Question:	will it fit a ruger P 94 .40 cal
Answer:	There is no writing anywhere on the clippers except the manufacturer's name, Duvilo. I cannot tell where they were made but they are a high-quality product. It looks as if it is made from surgical-grade steel.
Question:	Will it work for 4 inch barrel, K-frame revolvers
Answer:	THE HANDLE LENGTH IS 3" . OVERALL LENGTH IS 5". BUT VERY SHARP.
Question:	Will it fit a taurus pt
Answer:	These are good quality, easily used clippers......I'm very happy with them. There is no info on the clippers regarding where they are made, and their packaging, if it contained any manufacturer info, is long gone. I tried to do a bit of Google research to find where these Duvilo clippers are made, and again came up empty.

Product features

BLACKHAWK! Omnivore Multi Fit Non Light Bearing Holster

Multiple holsters for multiple handguns is no longer an issue. The BLACKHAWK! Omnivore multi-fit family of holsters accommodates more than 150 styles of semi-automatic handguns.

The active retention mechanism locks onto our proprietary Rail Attachment Device, not the frame of the handgun for the non-light bearing model.

The instinctive thumb release disengages the locking mechanism from the Rail Attachment Device when drawing the handgun.

Quick Thumb Release

Delivers instant access to your handgun, critical in high-pressure situations.

Adjustable 3-position thumb release, customization for any hand size.

The thumb release will not engage in the firearm is being pulled on.

Free-Floating Design

Holster does not contact the frame, preventing wear on the finish.

Allows debris to fall through, without getting trapped-reducing jamming.

Extra clearance allows for easier holstering and fits a wide range of custom add-ons.

True Multi-Fit

Fits almost any semi-automatic handgun with an accessory rail.

Available in light bearing models for both SureFire and Streamlight.

Explore our unparalleled list of compatible guns.

Level 2 Retention

Locks directly to our Rail Attachment Device, not your handgun's frame.

Uses a thumb-activated retention mechanism to secure your firearm.

Superior strength to weight ratio against any other retention system.

Product description

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products that won’t let you down. At Blackhawk, we're not just making gear; we’re honoring a vow.

• Mission: To always put the needs of our men and women in uniform at the forefront of everything we do in an effort to better serve those who serve and protect us all.
• Commitment to quality and reliability applies to everything we do
• Top flap covers pistol for maximum weapon protection and retention and includes elastic, rubberized leg straps for stable belt mounting
• Adjustable thumb break for quick draw
• Flap is secured open by hook and loop or closed by a side-release buckle
• Front-mounted pouch for extra magazine, knife, or light and additional magazine pouches can be mounted horizontally on belt flap - Part numbers for pouches: 38CL__ (06, 08, 09, 10)
• Fits most large-frame weapons

User questions & answers

Question:	Will this fit a 5inch Springfield armory mil spec
Answer:	The nail clippers feel sturdy and cut evenly and cleanly.
Question:	What’s the length of the leg straps
Answer:	I believe the larger clippers are made for toenails, the smaller for fingernails, so yes. They are very sharp and sturdy, well made.
Question:	Anyone try this holster yet with a Sig P229? I do a lot of trail running and looking for something to that will fit secure and not flop on my leg
Answer:	I think these are chrome plated only. They can be high temp disinfected but they may rust sooner. Also the handles may deteriorate from high heat
Question:	Do I need a special belt for this or can I use a standard tactical belt (like a military issued belt
Answer:	Yes, the nail clipper is very sharp. Use it carefully if your nails are rough. After cutting your nails, you can use a nail file to polish them.

Product features

About us

Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products. At Blackhawk, we're not just making gear; we’re honoring a vow.

About Blackhawk!

Product description

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products that won’t let you down. At Blackhawk, we're not just making gear; we’re honoring a vow.

• Sport type: Hunting
• Fits 3.75" - 4.5" Barrel large autos
• Ultra-thin, three-layer nylon laminate provides comfortable next-to-skin wear
• Smooth nylon for easy draw
• Belt clip slips over pant top or belt to retain holster

User questions & answers

Question:	What size do I need for a Remington
Answer:	No. They stick on the back with the adhesive that comes on the hanger. I used them to hang 12x14 inch photos that were printed on hardboard at Costco and they worked very well.
Question:	Will it fit a glock 19 with a generic light on the bottom rail
Answer:	What I can tell you it holds to the back of plate and is on the wall. Unless the picture is real heavy there’s no reason it shouldn’t work.
Question:	What size for Canick TP9v
Answer:	I would think so, I used them in plates. For the more heavier I used the disc hangers.
Question:	Springfield XD subcompact
Answer:	They are white.

Product features

About us

Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products. At Blackhawk, we're not just making gear; we’re honoring a vow.

About Blackhawk!