14 best appendix carry holsters

• AVAILABLE IN LARGE AND XL - Large neoprene band is adjustable and fits up to a 44" belly. XL fits up to a 54" belly. (Measure hips or belly do not order based on pant size) Soft and comfortable enough to wear directly against your skin.
• ONE SIZE HOLSTER IS COMPATIBLE WITH MOST FIREARMS - Surgical grade elastic holster is compatible with small subcompact, compact, and even full size pistols and revolvers. 380, 9mm, 40 auto, 45 ACP, 38 special, 357, and 10mm etc.
• CARRY IN ANY POSITION - Can be worn inside the waistband IWB, outside the pants OWB, cross draw, appendix, 5 O'clock (behind hip), twelve oclock, small of back, and even high up like a shoulder holster or concealed carry shirt.
• RIGHT OR LEFT HAND DRAW - Bellyband Holster is available in right and left hand draw. Compatible with Glock 19, 23, 38, 25, 32, 26, 27, 29, 30, 39, 28, 33, 42, 43, 36, M&P Shield, Sig Sauer, Kahr, Beretta, Springfield, Taurus, Bersa, Kel Tec, Walther, and more.
• HARD PLASTIC TRIGGER GUARD for extra safety while carrying. Accessory pocket and Movable Spare Magazine Pouch included. Metal snap retention strap provided keeps your gun secure. (you can cut off the retention strap if you prefer best speed over extra retention support) Also great for AirSoft.

User questions & answers

Question:	What is the minimum size belly the XL will fit
Answer:	Yes. The Glock 26 fits very well.
Question:	Does this work with Glock
Answer:	I'm not really sure but I've had mine for several months I honestly believe it's going to last a really long time,it's really high quality
Question:	About how long do these holsers last
Answer:	I suppose anything is possible. The way the clasp that sits over trigger is constructed i dont have that concern. The strap its self is strechy material, but the clasp cover is rigid leather..(leather like?) It feels safe to me, and i tried, triplely sure, that i was unloaded, and made every possible move to see if that would happen.
Question:	How rigid is the material over the trigger? Would it be possible to lean over and have something just the right size press in and move the trigger
Answer:	Yes but the holster isn’t really a good holster, I wouldn’t recommend buying it🤷🏾‍♂️

• 【FINE CRAFTSMANSHIP】Lives can be saved, and that is what drives our craftsmen to make sure every holster is reliable in quality, durability, comfort and fit for actual combat and daily carry.
• 【IWB Glock 19 HOLSTER, FULL COMPATIBILITY WITH Glock 19 19X 23 32 45(Gen 1, 2, 3, 4, 5)】These IWB holsters for pistols are tailor-made for Glock 19, Glock19X, Glock 23, Glock 32, Glock 45(Gen 1, 2, 3, 4, 5). Inside waistband polymer holsters for concealed carry your handgun. Please note these holsters are not fit for any attachment like laser/light accessories.
• 【TRIGGER GUARD COVER, NO RISK of PRESSING MAG RELEASE】Our precise Aluminum molds designed by our CAD engineers ensure exceptional consistency and accuracy of holsters, covering all access to the trigger, and uncovering mag release saving the trouble and danger of pressing it accidentally by pressure from holster.
• 【FIT LIKE A GLOVE WITH AN AUDIBLE CLICK】Provide secure retention with tension-adjustment screws. A handful of grip makes your drawing and pulling quick and smooth without any scratch on slide.
• 【ANGLE THE WAY YOU WANT WITH -5 TO 20 DEGREES ADJUSTABLE CANT】1.5'' BELT CLIPS are rock, solid with hook at bottom and they will fit tight on your belt and stay when drawing. Cant is adjustable from -5 to 20 degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw. All the edges are polished and smooth to make you feel comfortable when it’s again the skin.
• 【LIFETIME WARRANTY】No questions asked return policy and Lifetime Warranty. If for any reason you are unsatisfied, please feel free to contact our 24/7 Customer Services, we stand behind the quality of our work!

User questions & answers

Question:	Will it fit a glock 34 gen
Answer:	im not sure but the amount of force used to unholster your firearm you then pulled the holster and firearm out at the same time because of the way it locks in place
Question:	Will this work with co2blow back 177 cal guns
Answer:	Right now, we haven't checked our holster with your co2blow back 177 cal, but we have told our engineer to follow this up. We offer an unconditional warranty to our holster, and if our holster does not fit, we will always be here to help and you can get your refund as requested at anytime. Thank you.
Question:	Will this fit a G19 with a beam attachment
Answer:	No
Question:	Can it be used for left or right ? Is is changeable between left and right
Answer:	Hello from Wumaly Support This holster is made for right handed draw. Thank you for your consideration.

Product features

A good holster saves lives, and that is exactly what drives our engineer to put energy into offering first-class holsters.

COMPATIBILITY

This holster fits a Glock 19 | Glock 19X | Glock 23 | Glock 32 | Glock 45（Gen 1-5）. It WILL NOT fit with any aftermarket attachments i.e. laser, flashlight, etc.

COVER ALL ACCESS TO THE TRIGGER

No risk of accidental discharges, covering all access to the trigger.

NO RISK OF PRESSING MAGAZINE RELEASE

Uncover mag release saving the trouble and danger of pressing it accidentally by pressure from holster.

AUDIBLE CLICK AND SECURE RETENTION

Allen key is included to adjust your prefer on retention. Audible click sound ensures your firearm is safe and secure every time you reholster.

ONE-HANDED DRAW WITH 1.5'' ROCK SOLID BELT CLIP

Fit tight on your belt and stay when drawing and reholstering.

ADJUSTABLE CANT FROM -5 to +20 DEGREES

For Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw

FULL LENGTH SWEAT GUARD

The sweat shield runs all the way to the end of the slide

POLISHED EDGE AND INSIDE-SMOOTH SURFACE

Fully Covered Trigger

The trigger guard is fully enclosed and protected against accidental discharges. There is no risk of activating the trigger by accident. It’s tailored for Glock 19, Glock 19X, Glock 23, Glock 32, Glock 45.

Smooth Inside, Hand-Polished Edge

Everytime you draw and reholster, the inside-smooth surface reduces friction and protects slide from scratch. Every of our holsters is polished on the edges by hands to make you feel comfortable when it’s again your skin.

Adjustable Cant From -5 to 20 Degrees

This slight adjustment from -5 to 20 degrees will help angle your holster perfectly for Apprndix(AIWB), Strong Side, Behind The Hip or Cross Draw.

Fit Like A Glove

It’s tailor-made for Glock 19, Glock 19X, Glock 23, Glock 32, Glock 45. You can adjust the retention with Allen wrench provided inside the package.

Full Length Sweat Guard

The Sweat Shield runs all the way down to the end of the slide, protecting firearm from constant skin/sweat exposure.

Holster Size

L x W x H = 7.25’’ x 3.0’’ x 1.75’’

Please note these holsters are not fit for any attachment like laser/light accessories.

Product description

After years of carrying concealed and never finding that perfect concealment holster, I finally decided that if you want something done right, you just have to do it yourself! As a competitive shooter and firearms instructor for the Department of Homeland Security, carrying concealed is not only a part of my job, it’s a way of life. That’s why I developed the Q-Series Stealth holster to meet the demands of those who expect more from their concealment system. During the design process I kept three guiding principles in mind; If a holster isn’t comfortable, no one will wear it. If it’s too expensive, no one will buy it, and if it doesn’t work, it’ll just get thrown into a box with all of your other lackluster gear. The Q-Series Stealth was built on these principles and I am sure you will be pleased with the result. The Stealth holster is an ambidextrous, tuckable, extreme low profile concealment holster that can be worn with or without a belt. It also offers one feature that most minimalist holsters do not, easy reholstering. I’ve worked hard to ensure that the Q-Series Stealth is reliable, comfortable and affordable. If you’re like me and depend on your holster to perform and function as well as the weapon you carry, then the Q-Series Stealth is made for you! — Gary Quesenberry

• GET THE PERFECT FIT - designed specifically for your Gen 3, Gen 4, and Gen 5 Glock models 17-41
• LOW-PROFILE & TUCKABLE - Extremely low-profile tuckable design sits close to the body and virtually eliminates printing, the ultimate option for for all IWB and appendix carry.
• AMBIDEXTROUS & POSITIVE RETENTION - ambidextrous spring steel clip is fully adjustable and provides positive retention on both the gun and the waistline, keeping everything exactly where you need it whether left or right handed.
• WEAR WITH OR WITHOUT A BELT - easily slips over belts up to 2 inches in width or without a belt the clip is designed to snap firmly over the waistband of your pants, keeping the inside waistband holster securely in place during the draw stroke.
• INJECTION MOLDED FOR PERFECT FIT AND WON'T DEFORM LIKE KYDEX - injection molded polymer construction is lightweight and guarantees a perfect fit every time and it won't deform in the heat like a kydex holster.

User questions & answers

Question:	Will this fit a smith and Wesson compact m&p
Answer:	Yes, I have one for my S&W compact m&p 45.
Question:	Will this fit the m&p compact
Answer:	Yes, the version for the M&P will fit the Compact (4 inch barrel) and the Subcompact (3.5 inch barrel). Since the Q-Series does not cover the barrel, length is not an issue. The first answer may cause confusion. "M&P Compact" refers to either the M&P with 4 inch (Compact) or 3.5 inch ( Subcompact) barrel, compared to the 4.5 inch barrel of the M&P. The M&P Shield is NOT the same gun. The Q-Series has a separate version for the M&P Shield. The M&P Shield is a single-stack pistol, compared to the double-stack M&P, so it is narrower.
Question:	Does anyone know if an ulticlip will work with this iwb holster
Answer:	Yes it will simply replace one of the screw holes with the utliclip (the holster has two scerew holes.
Question:	can you wear this with a shirt tucked in
Answer:	Yes

Product description

The Hidden Truth® is an appendix holster with integral Mag Pouch. Built from 100% Kydex™ and is adjustable for height and cant. It comes with "C" clips and "J" clips are optional accessories Applications: GLOCK 19, 19 GEN 5, 23, 32, 19X, 45

• Skilled Craftspeople Still Construct Our Holsters By Hand
• We Still Build And Ship From Our Plant In The Usa. And Our Enterprise Is Still Owned And Run By The Desantis Family
• High Quality Leather, Extremely Tough Design And Stitching
• Package Dimensions: 3" ( H ) x 12" ( L ) x 9" ( W )

User questions & answers

Question:	Will it fit a g20 gen
Answer:	No its specifically for a glock 19
Question:	Will this fit a m&p 9mm shield ez
Answer:	Its for a glock 19
Question:	can this be converted to left hand draw
Answer:	No but you can get It right or left hand draw.
Question:	Will this fit a 5” with OI
Answer:	no

• Custom-molded IWB Appendix holster for perfect fit, secure carry and perfect performance while training or carrying! Custom Fit for: S&W M&P380 Shield EZ
• Adjustable Retention: Without any additional tools, fully adjust the retention to get the sweet spot for how much retention you prefer to get a perfect draw for you!
• Conceal in Comfort: Reduced footprint while the soft neoprene backing is flexible to move and shift with your body throughout the day during everday carry or while at the range. Neoprene works as a sweat-wicking material that is breathable to eliminate irritation when wearing the holster for long periods of time.
• Change How You Carry: Integrates seamlessly into any of the ShapeShift Line of holsters from Alien Gear meaning you can expand the ways this holster allows you to carry, from open to concealed to shoulder. *This product only comes with the IWB Appendix option as well as the completed shell for use with other ShapeShift Products*
• Made right here in the USA, insuring the use of high quality materials and hardworking American craftsmanship where we stand behind our Iron Clad program to insure you have a holster for life after a 30 day test drive!

User questions & answers

Question:	Will the Ruger S9 case fit the Security
Answer:	Send measurements of gun and we will check.
Question:	What size should I get for g2c
Answer:	This gun holster is 6 inch long 11/4 inch to barrel guard latch and 1 in wide
Question:	Will this work on the s&w m&p 2.0 with laser/flashlight attachment on my barrel
Answer:	I don’t think it will fit with the attachment it’s form fitted for the specific gun you buy it for I love mine but that is good question I wonder if they can make one that will fit the attachment. I have had mine for two years now it’s my everyday holster very comfy I forget it’s their and I carry a Springfield xdm which is a bulky heavy gun.
Question:	Is this bulky and hard to hide? Im female
Answer:	Yes. I ordered this for an appendix carry, but you will have to wear very loose fitting clothing in order to hide. With normal jeans and shirt, it is very noticeable. I would not recommend this for a female.

Product features

Alien Gear ShapeShift - Appendix Carry Holster

Discover a new standard of appendix carry with the Alien Gear ShapeShift Appendix Carry Holster. You aren't likely to find a holster like this anywhere else on the market. Our appendix IWB holster uses a comfortable base to make appendix carry much more tenable than other holster designs. The neoprene back layer cushions while ventilating the skin, allowing it to breathe while wearing the holster. The spring steel core helps anchor the holster to the wearer and gives the holster a firm but flexible core. While it is designed for appendix carry, you can wear this holster anywhere you choose inside the waistband. Retention is fully adjustable, so you can set the holster to the draw of your liking. You'll also be able to enjoy the custom fit of the ShapeShift holster, as it is custom-molded for exactly your make and model of pistol. The ShapeShift Appendix Carry Holster is proudly made in the USA, and comes with Alien Gear Holsters’ Iron Clad program, including a 30-day trial period and will repair or replace your holster for life. Make a shift to a better carry.

Custom Molded

The ShapeShift shell is custom-molded for your make and model pistol, but can be used with other holsters in the ShapeShift system.

Full trigger guard protection. The ShapeShift shell fully wraps the trigger, for the utmost in security.

Ultra-comfortable holster base. A backing layer of ventilated neoprene lets the skin breathe, and a spring steel core gives the base reinforcement.

Toolless adjustment. No tools are needed, as passive retention, cant angle and ride height can all be adjusted without tools.

The ShapeShift Appendix Carry Holster is designed to carry all day, every day

A concealed carry holster that isn't comfortable is one that you'll find reasons not to wear. The appendix holster is designed so that you actually want to put it on. The base features a backing layer of ventilated, moisture-wicking neoprene. This lets the skin breathe and keeps you dry, while providing a cushioning layer. It can be worn against bare skin without issue.

The holster base is reinforced with layers of woven ballistic nylon and spring steel, giving the holster a firm but flexible spine. This also creates a stable platform for drawing and reholstering, so you can carry it on the street and use it at the range while training!

Made in the USA

Made right here in the USA we can insure that we are using high quality materials and don't skimp on the craftsmanship that goes into making all of our products! Just like our roots that go deep into the United States, we stand by our products with our 30 day test drive and our Iron Clad program, meaning you have 30 days to try out your new holster and see how it fits in with your standards. Once you've tried it and find out you love it we will make sure that your new holster stays high quality for life!

ShapeShift Modular Holster Shell

The ShapeShift Modular Holster System allows you to switch between holster platforms at will, with no loss of security whatsoever with our patented locking system. If you wish to use additional holster types within the ShapeShift system, you already have the holster shell. Simply purchase the appropriate Expansion Pack and seamlessly switch between them in seconds.

Toolless Adjustment

No more need to hunt for a hex key. The ShapeShift holster system is totally toolless. Passive retention, cant angle and ride height can all be adjusted without the need of tools of any kind.

Product description

✔ THE QUALITY



The CONCEALED CARRIER Universal Neoprene Inside The Waist (IWB) Holster is a high-quality surgical grade and breathable neoprene material. Whether using as your main method of concealed carry or as a back-up concealed carry firearm, you can count on the quick draw capability and durability this holster offers. The thumb break retention strap on the IWB holster is incredibly fast and effective with the simple flick of your thumb.





✔ THE WARRANTY



The IWB holster is fully refundable if you are not satisfied. We offer a lifetime warranty on the inside the waistband holster.





✔ THE FLEXIBILITY



This universal holster can also fit ANY size hand gun, not just the sub-compact firearms that many other universal IWB holsters sold on Amazon require you to use. However, there has been some issues with certain models of SIG SAUER handguns that may require you to take a couple stitches out with a razor to fit the trigger guard in.





✔ THE ADJUSTABILITY



The holster is designed for any type of carry i.e. appendix, hip, back carry, etc.





✔ THE EASE OF USE



Simply place inside your waistband and place the durable metal clip to rest over any size pant belt to hold securely in place.





✔ THE EXTRA MAGAZINE POUCH



Whether you're carrying an extra magazine, a knife, or any form of non-lethal protection such as taser or pepper spray, you will be able to enjoy the extra magazine pouch included with your purchase which no other IWB holsters on Amazon offer.

• ⭐️ RIGHT-HANDED ✔ MAXIMUM COMFORT GUARANTEE - Our IWB holster is made out of padded and breathable surgical grade elastic neoprene with air holes that allow ventilation for your legs – you'll forget you have it on! The soft foam innards of the holster will prevent rubbing and discomfort unlike most other IWB holsters you'll find on Amazon!
• ✔ COMBAT VETERAN OWNED BUSINESS - We are a team of U.S. military veterans using our combat experience with firearms to provide you with the most effective IWB concealed carry holster on the market. We also provide outstanding customer service! Our 100% SATISFACTION GUARANTEE and LIFETIME WARRANTY ensures you'll be making a risk free purchase with us.
• ✔ FITS ALL GUN SIZES - The universal inside the waistband holster was designed to accommodate any size firearm from a sub-compact Glock 27 all the way up to a full-size .45 1911. Don't believe me? Check out our pictures on the Amazon listing to prove it! The only exceptions are a few SIG SAUER models that may require a couple of stitches to be cut with a razor to fit the trigger guard through.
• ✔ QUICK DRAW GUARANTEE. ✔ NO PRINTING GUARANTEE - Thumb break holster allows you to flick up the retention strap with the back of thumb to draw the firearm quickly and effectively. Also, you can walk, jump, work out, and even run with this IWB holster's sturdy metal belt clip without any movement of your firearm. The sleek design of this holster allows you to carry concealed discreetly with no possibility of firearm showing through your pants (printing).
• ✔ EXTRA MAGAZINE, KNIFE, OR NON-LETHAL HOLSTER - We provide you with an extra neoprene belt clip holster that can be used for your extra magazine, a folding knife, or even some non-lethal equipment such as pepper spray or a taser.

User questions & answers

Question:	wather p99 fittment 40cal
Answer:	Without the light, I believe it will fit. I bought it for a Sig 365. Fits it perfect with no attachments.
Question:	Would this fit m&p 2.0 4.25 with surefire x300 U-a light ? I’m left handed
Answer:	Fits GLOCK. 22/35. PERFECT.
Question:	Does this fit the xds 9mm
Answer:	It should your Barrel stick through a little bit on the end but there's an open hole for it to do that I was able to get a full-size 1911 and my Springfield XDS with a laser on it the sit well into it the Springfields got a three and a quarter inch barrel and the 1911 to 5 inch barrel
Question:	Hi, Does it work with S&W
Answer:	Hello,it will fit hellcat compact.

• Fits Only: Smith & Wesson M&P 9mm/.40 S&W Shield & Shield M2.0 - 3.1" Barrel - No Light/Laser Attachments (Right Hand Draw Only)
• IWB Holster - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees
• Precision molds from CAD milled in house on our CNC. Made of .08" Thickness Boltaron Material - Belt Clip 1.5" wide - All Stainless Steel Black Powder Coat Hardware
• Posi-Click' Audible Retention Lock System - Sweat Guard covers full length of slide
• Made in USA - WE STAND BY OUR QUALITY: 100% Satisfaction Guarantee, No questions asked return policy and Lifetime Warranty.

User questions & answers

Question:	Will this fit my M&p 9 shield performance
Answer:	My S&W M&P Shield 40 cal fits perfect. I am not sure how the 9mm will fit. How ever the listing says 9/40.So I am assuming it fits.
Question:	Will this holster fit a SIG 1911 45 cal
Answer:	A 1911 is a much bigger frame so I would say no it won't fit.
Question:	Will this holster work for appendix carry
Answer:	I am 5 foot 8 and 180 pounds and it is just too uncomfortable for me. It feels good in the appendix position when you're standing up, but if you have to bend over or sit down then it really digs in to your groin area. So I am not able to but if you have a different build then maybe you could.
Question:	Will this fit the performance center ported m&p shield
Answer:	if the porting doesn't change the dynamics of the Shield... sure

• Thick .08 Kydex material that is strong, durable, and molded specifically for your weapon
• Designed for the EXPERIENCED appendix concealed carry user
• Adjustable Retention for both gun & magazine, so you can get the perfect fit
• Flared opening allows for easy re-holstering
• CNC Machined for ultimate consistency and accuracy

User questions & answers

Question:	Will this Fit a Glock
Answer:	It will say in the description what model pistol it fits...definitely worth looking into to as I have several of their holsters
Question:	Is this for a right hand drawl
Answer:	Yes
Question:	Good evening will this fit a glock
Answer:	Yes it will, a G45 will fit any g19 holster
Question:	Buenos días, es compatible con Glock 19X
Answer:	Sí

• 3 SIZES FOR A PERFECT FIT - All of our belly band holsters are adjustable but the 3 lengths ensure you don't have a lot of material left over. The Medium fits up to a 37" belly, Large fits up to a 42" belly, Extra Large fits up to a 53" belly. Measure belly or hips, whichever is larger and always round up if you are between sizes.
• ONE SIZE HOLSTER IS COMPATIBLE WITH MOST FIREARMS - Surgical grade elastic holster is compatible with most guns from micro, subcompact, compact, and even full size pistols and revolvers. 380, 9mm, 40 auto, 45 ACP, 38 special, 357, and 10mm etc. Patent Pending Retention Strap provides a fast smooth draw from holder. Even fits airsoft.
• CARRY IN ANY POSITION - Can be worn inside the waistband IWB, outside the pants OWB, cross draw, appendix, 5 O'clock (behind hip), twelve oclock, small of back, and even high up like a shoulder holster or concealed carry shirt.
• RIGHT OR LEFT HAND DRAW - Bellyband Holster is available in right and left hand draw. Compatible with Glock 19, 23, 38, 25, 32, 26, 27, 29, 30, 39, 28, 33, 42, 43, 36, Smith and Wesson, Bodyguard, M&P Shield, Sig Sauer, Ruger, Kahr, Beretta, Springfield, Taurus PT111, Kimber, Rock Island, Bersa, Kel Tec, Walther, and more.
• OUR PROMISE – We stand by and believe in our products! If you have any problems, contact us and we will offer you a full refund or replacement!

User questions & answers

Question:	Do you carry nude/white? Black shows up through light colored clothing
Answer:	Black
Question:	Do anyone run with this band
Answer:	I wear it higher up by my ribs. So yeah, running is no problem.
Question:	What's the difference between the gen 1 holster and this
Answer:	The gen 2.0 has a more easily accessible strap making it faster and easier to draw the gun from the band.
Question:	What are the actual lengths of each size product
Answer:	Medium is 36 1/4" total length. But that includes the 3 1/4" Velcro overlap. So actual size fits up to 33" belly. There is very little stretch, but you might gain 2"- 2 1/2" by pulling it tight.

• Thick .08 Kydex material that is strong, durable, and molded specifically for your weapon
• Designed for the EXPERIENCED appendix concealed carry user
• Adjustable Retention for both gun & magazine, so you can get the perfect fit
• Flared opening allows for easy re-holstering
• CNC Machined for ultimate consistency and accuracy

User questions & answers

Question:	Will this pistol n sidecar appendix rig work for a polymer80 pf940c with aplc
Answer:	It will not work with the p80
Question:	Will it work with night sights
Answer:	There shouldn't be a problem. Only problem I could imagine is if you have raised, competition pro night sights but still, theres enough room to accommodate in my opinion
Question:	Does it fit a Glock 23 with a crimson trace crm-204 laser mounted
Answer:	no
Question:	Will the olight mini 2 fit in the holster
Answer:	At the price point I would say this would be a good holster to modify with a heat gun to your desired flashlight needs. Use a heat gun under 250 degrees going back and forth softening at Kydex then slide your gun into the holster as its softening. Then push the new pressure points around the flashlight making a snug fit as it's drying do so with pencil or pen. Make sure you do this with the gun unloaded!

Product description

Hand Molded, Adjustable Cant(-5 to +20 Degrees) IWB KYDEX Holsters. Now Claw Compatible! Crafted and Formed over our Proprietary, Precision Aluminum Molds - Our molds are designed and milled in house so we can ensure the consistency, quality, & fit for each and every holster we make, regardless of the gun it is for. They are the perfect all around holster for every day concealed carry. These holsters are comfortable enough for everyday use and very easy to hide no matter how you are dressed. Appendix Carry (AIWB), Hip, Carry, Back Carry, Cross Draw.

Holster Features

Claw Compatible to Minimize Printing!

Adjustable Cant (-5 to +20 Degrees)

Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered

Undercut Trigger Guard for ease of Draw

Over-cut Open-face to Accommodate Threaded Barrels

Accommodates Suppressor Height Sights

Full Length Sweat Guard with Rear Sight Shield

Fiber-Reinforced Stealth Belt Clip so no one knows you are Carrying

All Black Oxide Steel Hardware with Threadlock

Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment

Unconditional Lifetime Warranty

• INSIDE THE WAISTBAND KYDEX HOLSTER fits: 1911 3.5" Officer (NR) (Non-Sig) (ONLY unless Specified). Our minimalist IWB holsters are designed to be worn comfortably inside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed and crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all of our holsters.
• EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw.
• ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your 1911 3.5" Officer (NR) (Non-Sig), you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry p
• CLAW COMPATIBLE - ELIMINATES PRINTING: Our 1911 3.5" Officer (NR) (Non-Sig) IWB Holster is now Claw Compatible. Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body. This effectively makes your weapon disappear inside your belt line.
• 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery & Equipment for a level of quality that is unparalleled. Our Quality & Durability is engineered into each holster from the start. Because of this, we guarantee that your holster will last you forever no matter what.

User questions & answers

Question:	Will this fit the new ruger lcp ii
Answer:	NO...It will NOT fit the LCP2 / LCP-II. Unfortunately I found out the hard way after I purchased it.
Question:	Can i use this if i have a light/laser on the trigger guard
Answer:	I use the version of this holster made for the M&P Shield 9mm 2.0 with integrated red laser. Its a perfect fit for that pistol.
Question:	Is this comfortable for appendix carry
Answer:	Well, as a lefty, I find that I am most comfortable with the holster in the 9:00 o'clock position or just a little past (maybe between 8:00/9:00). I tried the appendix location but it was uncomfortable while bending or sitting down. I really feel comfortable with it.
Question:	Is this good for appendix carry
Answer:	I use this with my Springfield XD-E .45 and I can't imagine using it as anything but an appendix carry. Putting it at 3 or 9 (hips) does not make sense to me. I have tried it and appendix is the only comfortable placement. I am a skinny dude and with the claw attachment it doesn't print at all.

Product description

This holster is compatible with: Glock 19 / Glock 19X / Glock 44 / Glock 45 Gen 3-5 / Glock 23 / Glock 32 Gen 3-4 ( Right Hand Draw Only). It is designed to be worn inside the waistband for concealed carry. CYA Supply Co. a member of NRA Business Alliance. We make our holsters with the end user in mind. We have put much attention to our materials, design and process to bring you a top of the line holster at a better price. Finally, you do not have to sacrifice quality for a good price! We have taken the major wear and friction points out of this holster. In most kydex holsters, makers mold straight to the shape of the gun, this includes the slide release, safety etc. By recessing this area we are able to create a smoother draw and re-holster. This also reduces the amount of holster wear on your gun. Our holsters are made from Boltaron thermoplastic, a similar plastic to Kydex. Boltaron is abrasion resistant, chemical resistant, and extremely durable. Boltaron out performs Kydex, the material most thermoplastic holsters are made from, in impact resistance, hardness, and keeps its shape better than Kydex in high heat situations. The cant of the holster is adjustable from 0 to 15 degrees, simply use the Hex Allen Key that is provided with your holster to loosen the screw on the belt loop and adjust. The retention of the holster can also be adjusted with the Hex Allen Key, by adjusting the two screws placed in front of the trigger guard. Holster has a Positive audible click when inserting the handgun into holster, this is done by making our molds with a groove in the trigger guard. As stated above, CYA Supply Co is veteran owned, and our holsters are made right here in the USA. Great State of Texas to be exact. Thank you for supporting American made small business.

• Fits Only: Glock 19 / Glock 19X / Glock 44 / Glock 45 Gen 3-5 / Glock 23 / Glock 32 Gen 3-4 - No Light/Laser Attachments (Right Hand Draw Only)
• IWB Holster - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees
• Precision molds from CAD milled in house on our CNC. Made of .08" Thickness Boltaron Material - Belt Clip 1.5" wide - All Stainless Steel Black Powder Coat Hardware
• Posi-Click' Audible Retention Lock System - Sweat Guard covers full length of slide
• Made in USA - WE STAND BY OUR QUALITY: 100% Satisfaction Guarantee, No questions asked return policy and Lifetime Warranty.

User questions & answers

Question:	Can i use this holster if my glock has ghost ring sights
Answer:
Question:	Will this holster a s&w sd9ve? I have heard some g19 holsters will
Answer:
Question:	Does this holster have an audible click, or at least a physical "feel" when the gun is fully holstered? \
Answer:
Question:	Will this fit Glock 19 Gen
Answer:

Product description

⭐️ This holster only fits a Glock 17 19 19x 22 23 26 27 31 32 33 45. It WILL NOT fit these Glocks with any aftermarket attachments i.e. laser, flashlight, etc.

✔ ONE SIZE FITS MOST GLOCKS

Toss your old box of obsolete holsters. If you own multiple Glock firearms (17, 19, 19x,  22, 23, 26, 27, 31, 32, 33, or 45) then this is the last holster you'll need to buy!

✔ LIFETIME WARRANTY

Check the price of a solid Glock holster out there with a lifetime warranty. None are less than $20.  Your purchase comes with a lifetime warranty backed by the reputable Concealed Carrier™ brand.

✔ POSI-CLICK RETENTION

An audible "click" sound every time you reholster the firearm to ensure your firearm is safe and secure.

✔ ADJUSTABLE RETENTION

With the simple twist of the included hex wrench you can increase or decrease the amount of retention that you would prefer on your firearm. 

✔ ADJUSTABLE CANT

Whether you want to carry straight up and down, or with a 20 degree 'FBI Cant' you can adjust the 'cant' on the belt clip from 0 to 20 degrees or anywhere in between. 

✔ UNBRIDLED COMFORT

ULTIMATE concealed carry experience. Our minimalist design provides you with a perfect holster without all 'fluff.'  The durable but smooth industrial grade polymer sits comfortably inside of your waistband.

✔ 100% MONEY BACK GUARANTEE - LIFETIME WARRANTY

No questions asked - If you are not completely satisfied with our IWB holster, we provide you with a 100% refund.

✔ COMBAT VETERAN OWNED COMPANY

We are a combat veteran owned company using our experience with concealed carry and firearms to personally inspect each individual piece so that you will have a PERFECT CCW holster EVERY time.

• ⭐️ RIGHT-HANDED ✔ FITS MOST GLOCK PLATFORMS! LIGHTWEIGHT (2 oz.) Safely fits a Glock 17 19 19x 22 23 26 27 31 32 33 45. It WILL NOT fit these Glocks with any aftermarket attachments (i.e. laser, flashlight, etc) however aftermarket sights are ok.
• ✔ ADJUSTABLE RETENTION: Audible clicking sound when holstered for positive retention assurance. The retention can be adjusted on the holster by loosening or tightening the hex nut on the bottom of the holster.
• ✔ ADJUSTABLE CANT: The angled cant on the holster can be easily adjustable to accommodate a 0 - 20 degree cant.
• ⭐️ COMBAT VETERAN OWNED BUSINESS - We are a team of U.S. military veterans using our combat experience with firearms to provide you with the most effective gun holsters on the market. We also provide outstanding customer service!
• ✔ LIFETIME WARRANTY ✔ 100% MONEY BACK GUARANTEE - No questions asked - If you are not completely satisfied with our IWB holster, we provide you with a 100% refund.

User questions & answers

Question:	Will the polymer 80 Glock frame fit in this holster
Answer:	YES! Look for my review (it has pictures of a P80 frame fitting). This holster works with my P80 G19 and my P80 G17 hybrid (17 slide/19frame). Don’t know what BKP is smoking...
Question:	Is it perfect for Glock 19 gen
Answer:	Yes. I’ve used it for 2 weeks with my Glock 19 gen 4
Question:	Is the belt clip metal or plastic
Answer:	Plastic
Question:	Will the holster cover the mag release on a glock
Answer:	It covers the mag release on my 27 however I do not know about the 19.

Product description

The obvious choice for concealed carry

Be prepared to defend yourself anywhere without causing others anxiety when you use the Amberide IWB Gun Holster for your SpringField XD-S 3.3" 9mm/.40S&W/.45ACP Molded to fit these models like a glove, the Amberide Handgun Holster is lightweight and has no excess bulk. With no sharp edges or corners, it ensures the highest comfort for discreet carry and more effective concealment under clothing.

Peace of mind and exceptional performance

Our holster boasts the Posi-Click Audible Retention Lock System so you'll know without a doubt that your firearm is securely seated. Because reaction time is crucial to survival, we've incorporated an adjustable retention screw that lets you determine how much force is needed to draw and fire. The stainless steel, black powder coated hardware lets you adjust the cant from 0 to 15 degrees to accommodate your style of carry.

We are a proud Texas company

The Amberide IWB Holster is made of strong, waterproof .08" Kydex to survive everyday use as well as intense physical encounters. The full-length sweat guard protects your firearm so you can always rely on it to save your life or the lives of others. We confidently offer a Lifetime Warranty against manufacturer defects for your peace of mind. In the unlikely event that our holster ceases to perform as promised under normal use, return it for replacement or a refund of your purchase price.

Keep your weapon at your fingertips while keeping it out of someone else's. Add the Amberide Kydex IWB Holster to your cart today.

• CARRY WITH CONFIDENCE when you secure your pistol in our concealed carry gun holster. Specifically designed for the SpringField XD-S 3.3" 9mm/.40S&W/.45ACP, this robust waistband holster safeguards your handgun while facilitating discreet, safe carry.
• RUGGED .08” KYDEX is strong yet lightweight for comfortable, confident carry in any situation. Waterproof and washable, it features a sweat guard that covers the full length of the slide to help maintain your side arm in pristine condition.
• CUSTOMIZE THE CANT of the 1.5” standard belt clip with a Phillips screwdriver for faster draw speeds and optimal concealment under clothing. The black powder-coated stainless steel hardware can be adjusted from 0 to 15 degrees without sacrificing full accessibility.
• ADJUSTABLE RETENTION PRESSURE ensures a fast and smooth draw, customized to your needs. Adjustments can be made quickly so you can tighten the retention screw for your morning jog and loosen it later for regular carry.
• LIFETIME WARRANTY pledge ensures your peace of mind when you choose this Amberide IWB Holster. If our product should ever cease to perform as promised, return it for replacement or a full refund of your purchase price.

User questions & answers

Question:	Will it sit a springfield xd 9 mod
Answer:	This Might Be A Perfect Fit Because I Ordered For My subcompact xd 9mm And It was A Tight fit And I Added A Streamlight Laser So No Ponger Use The Holster
Question:	is there such a holster for xd sub 3" with a laser? Thankyou
Answer:	Not this particular holster but there are companies that custom make holsters
Question:	Will this fit the "mod.2" version of the xd-s 3.3" .45acp
Answer:	Yes. This is what I carry and it fits perfectly. Great holster.
Question:	Will this fit the XDS mod
Answer:	Yes it will. That's what I have