14 best boat mooring buoys

Product features

Some Of What You Will Find In How To Brew:

- Crash course in brewing.

- Step-by-step instructions.

- Extract, kit, and all-grain brewing.

- Learn to build your own equipment.

- Successful recipes.

- Troubleshooting.

- Recipe development.

- Simple yeast ranching.

- Hopping techniques.

- Ales and lagers.

- Bottling and kegging.

- Everything you need to know and were afraid to ask.

Excerpt From Chapter One

Do you want a great beer? Success or failure starts here. This list is prioritized from highest to lowest; meaning that, if you make mistake in a higher priority, it can’t be fixed by doing a lower priority correctly. Don’t worry, I will walk you through all of this as we go, but I want you to understand the big picture first.

Product features

Sample Recipe: Irish Red Ale

1. Pre-crush the malt and barley at your homebrew shop or put them in a heavy-duty zip-top plastic bag and thoroughly crush with a rolling pin. Put the crushed grain in a muslin bag.

2. Add the 2.5 gal/9.5L water to your kettle. Add the muslin bag to your kettle, suspending it so it doesn’t touch the bottom of the pot. You can tie the bag to the pot handle if the bag is long enough. If not, or if you don’t have a handle, use a large binder clip to clip it to the side of the pot so it’s not touching the bottom. Start heating the water. Remove the bag before the water starts to boil, preferably at about 160°F/74°C.

3. When the water is nearly at a boil, move it off the heat and add the LME, stirring as you pour it in. When it’s fully mixed in, return the pot to the heat.

4. When the water comes to a boil, add the hops and set your timer for 60 minutes. Adjust the heat to keep a rolling boil while managing the foam.

5. With 5 minutes left to go, add the Whirlfloc tablet.

6. Pour three-quarters of the chilled water into your fermentor, then transfer in the hot wort. Add as much of the remaining chilled water as needed to bring the volume up to 5.5 gal/21L.

7. When the wort has cooled to 65° to 75°F/18° to 21°C, add the yeast. Seal the fermentor, shake or swirl to aerate, then let ferment for 10 to 14 days, until fermentation is complete.

8. When ready to bottle, prepare your priming sugar and add to the fermented beer (see pages 58–59 for details) or add a carbonation drop to each bottle. Proceed with bottling and conditioning (see pages 57–67).

Product description

Buoyancy rating represents the number indicated is the maximum flotation the buoy provides while fully submerged. 50% of this value will be the weight the buoy can support at the level of the blue stripe.

• Rope nest design has a built in cup shape at the top of the buoy that allows the anchor shackle to nest below the buoy surface
• Hard-skin polyethylene shell is UV protected to resist the weathering effects of sunlight and is foam filled to positively displace water
• Hard skin shell now has a sandblasted finish which allows the buoy to be easily painted for identifying
• 2-1/2" Tube-Through-The- Center design with blue reflective striping, hardware not included
• Three year flotation warranty, 100 lbs buoyancy

User questions & answers

Question:	What is the appropriate mooring collar size for this 18 inch model? the 2-1/2'' diameter collar or the
Answer:	Where do you connect to anchor chain?
Question:	Is the stripe reflective on this item: Taylor Made Products Sur-Moor T3C Boat Mooring Shackle Nest Buoy, 18-Inch
Answer:	I haven’t had a chan e to wear my yet, but now I am considering sending it back if the color comes off that easily.
Question:	How much chain wt. will the mooring ball hold up
Answer:	I have another one exactly like it and mine is I’m not sure about this one.
Question:	Any shackle product recommendations that fits 5/16 chain, but won't slip through 2.5 collar/18" nest buoy
Answer:	I would go with a medium.
Question:	Is this bouy made of steel? If it so, is it foam filled? Or is it a foam bouy with a steel rod in the middle
Answer:	You can choose the size M or S.we upload the size chart as you can see,and if you wear thick clothes inside,or you have a big breast,then you need choose M.Different factors different sizes,depends on the situation
Question:	What does this look like? Is it lights or a buoy
Answer:	No, they are very quiet.
Question:	diagram of how it should be attached? Says dont attach mooring lines to the top
Answer:	Sorry I don't know Spanish.
Question:	find through buoy bolt`
Answer:	Dear buyer, For now, On our tag only shows the max waist. But benifit from the external waist adjustment it can be 4 inches smaller. For example, when you order XL/SL, which means 38W X 30L on tag, it will also suit for 34W X 30L. they are the same

Product features

The Basics of Brewing

Craft Brewer Recipes

Extreme Brewing Recipes

Vintage Brewing Recipes

Porter

Porter holds a unique place in brewing history as the world’s first beer to be produced on a truly industrial scale and the first to become a global phenomenon. Yet despite its fame, the origins of porter are still clouded in mystery and obscured by myth.

Pale Ale/ Bitter

The history of pale ale is an odd one. Long a second fiddle to mild ale, pale ale, in its commonest form of draft bitter, eventually fought its way to the peak of popularity in the 1960s, only to be swiftly eclipsed by the unstoppable rise of lager.

European Beers

In this section, we’ll be taking a look at a few of many top fermenting styles that existed in Europe before they were swept away by a flood of lager in the late nineteenth century. Once as popular as bitter or mild, few such beers made it past World War I and have slipped almost entirely from memory.

Stout

Much of what the preceding section says about porter applies equally to stout. Don’t worry about what modern style guidelines might tell you about the differences between the two. Historically, the difference was very simple: Stout was the name given to all porter stronger than standard strength. In all respects other than strength, porter and stout were identical.

Taylor Made Anchoring and Docking

Unrivaled quality. From the first custom canvas piece created in 1908 by Nelson Taylor, Taylor Made has been setting the standard for design and product excellence in boat fenders, buoys, dock products, and a wide variety of other boating accessories. Boaters everywhere trust the Taylor Made brand to deliver top-performing, high-quality products for their marine needs. Taylor Made is a proud member of Lippert, a leading, global manufacturer and supplier of highly engineered products and customized solutions dedicated to shaping, growing, and bettering the RV, marine, automotive, commercial vehicle, and building products industries. Whether you're on the road or the water, our team is always thinking about your next journey, pushing the possibilities of our products, all to better your time spent outdoors, whenever, wherever, for years to come.

Fenders

Taylor Made knows fenders. For more than 60 years, Taylor Made has been protecting boats of all sizes. Boaters rely on innovative engineering and superior design in every fender made, whether for a yacht or personal watercraft and everything in-between.

Fender Covers

Fenders protect your boat, but what protects your fenders? Our fender covers not only provide maximum protection to your boat without scuffing or marring the gelcoat they also extend the life of your fenders.

Fender Adjusters

Boaters need to quickly and easily adjust their boat fenders when approaching unfamiliar docks, rafting, and mooring. Taylor Made has designed a range of fender adjusters to take the worry out of dealing with awkward knots and effortlessly adjusting fenders to the exact height needed.

Marker Buoys

Taylor Made marker buoys help identify safety areas, guide boats into channels, mark water ski courses, and a great fishing spot. Our marker buoys come in highly visible colors and can take on heavy-duty applications and the rigors of a marine environment.

Mooring Buoys

Built tough with a hard, polyethylene skin, our mooring buoys have ultra-violet light absorbers for long-term life in the sun. The blue reflective stripe offers high visibility day or night. Many buoys have a tube-through-the-center design allowing your anchor chain easy pass-through for mooring applications.

Buoy Accessories

Taylor Made boat buoy accessories help your buoys perform when and where you need them the most. From mooring collars to replacement hardware, these accessories are tough and durable. They are designed to work with Taylor Made buoys as well as other buoys with the center tube design.

Dock Boxes

Boaters need a convenient, dry and safe place to store life jackets, cushions, fishing gear and more. Taylor Made fiberglass dock boxes are coated with a durable UV gelcoat finish with a solid foam core that contains no trapped air, making it more resistant to water and odors. Gas shocks are standard with our fiberglass boxes that keep the lid open in high winds and are easy to close.

Dock Carts

Taylor Made has designed a reliable way for boaters to get their gear from their vehicle to their vessel with their dock carts and designed with an easy-to-use handle that minimizes leaning when transporting from one spot to another. The angled-up tub allows for more leg clearance and no bumping into your shins. These carts are versatile and can be used for marine and other applications such as gardening or lawn work.

Dock Steps

Getting on and off your boat should not be a challenge. Taylor Made dock steps have a non-slip pad for maximum protection for a secure and safe entry and exit to any vessel in dry or wet conditions. These dock steps are available in single, double and triple treads and are easily mounted to any dock.

Dock Wheels

Taylor Made dock wheels are a great protector and offer substantial dock cushioning. They have a molded-in inflation valve that is available in corners and straight mounts to adjust the specific level of firmness you need. Our dock wheels come with heavy-duty hot-dipped galvanized hardware for easy installation.

Dock Edging

Taylor Made has a wide variety of dock edging applications that protect your boat from taking on any damage from contact with sharp edges and corner of docks, piers or floats. EPDM rubber and commercial-grade vinyl dock edging are easy to install and tolerate harsh UV-rays and the marine environment.

Piling Caps

Protecting dock pilings from water damage or bird nests can be prevented with Taylor Made piling caps. These dock caps are made with strong polypropylene that will protect your dock or pier pilings. These piling caps give your dock a more finished look.

Taylor Made Anchoring and Docking

Unrivaled quality. From the first custom canvas piece created in 1908 by Nelson Taylor, Taylor Made has been setting the standard for design and product excellence in boat fenders, buoys, dock products, and a wide variety of other boating accessories. Boaters everywhere trust the Taylor Made brand to deliver top-performing, high-quality products for their marine needs. Taylor Made is a proud member of Lippert, a leading, global manufacturer and supplier of highly engineered products and customized solutions dedicated to shaping, growing, and bettering the RV, marine, automotive, commercial vehicle, and building products industries. Whether you're on the road or the water, our team is always thinking about your next journey, pushing the possibilities of our products, all to better your time spent outdoors, whenever, wherever, for years to come.

Fenders

Taylor Made knows fenders. For more than 60 years, Taylor Made has been protecting boats of all sizes. Boaters rely on innovative engineering and superior design in every fender made, whether for a yacht or personal watercraft and everything in-between.

Fender Covers

Fenders protect your boat, but what protects your fenders? Our fender covers not only provide maximum protection to your boat without scuffing or marring the gelcoat they also extend the life of your fenders.

Fender Adjusters

Boaters need to quickly and easily adjust their boat fenders when approaching unfamiliar docks, rafting, and mooring. Taylor Made has designed a range of fender adjusters to take the worry out of dealing with awkward knots and effortlessly adjusting fenders to the exact height needed.

Marker Buoys

Taylor Made marker buoys help identify safety areas, guide boats into channels, mark water ski courses, and a great fishing spot. Our marker buoys come in highly visible colors and can take on heavy-duty applications and the rigors of a marine environment.

Mooring Buoys

Built tough with a hard, polyethylene skin, our mooring buoys have ultra-violet light absorbers for long-term life in the sun. The blue reflective stripe offers high visibility day or night. Many buoys have a tube-through-the-center design allowing your anchor chain easy pass-through for mooring applications.

Buoy Accessories

Taylor Made boat buoy accessories help your buoys perform when and where you need them the most. From mooring collars to replacement hardware, these accessories are tough and durable. They are designed to work with Taylor Made buoys as well as other buoys with the center tube design.

Dock Boxes

Boaters need a convenient, dry and safe place to store life jackets, cushions, fishing gear and more. Taylor Made fiberglass dock boxes are coated with a durable UV gelcoat finish with a solid foam core that contains no trapped air, making it more resistant to water and odors. Gas shocks are standard with our fiberglass boxes that keep the lid open in high winds and are easy to close.

Dock Carts

Taylor Made has designed a reliable way for boaters to get their gear from their vehicle to their vessel with their dock carts and designed with an easy-to-use handle that minimizes leaning when transporting from one spot to another. The angled-up tub allows for more leg clearance and no bumping into your shins. These carts are versatile and can be used for marine and other applications such as gardening or lawn work.

Dock Steps

Getting on and off your boat should not be a challenge. Taylor Made dock steps have a non-slip pad for maximum protection for a secure and safe entry and exit to any vessel in dry or wet conditions. These dock steps are available in single, double and triple treads and are easily mounted to any dock.

Dock Wheels

Taylor Made dock wheels are a great protector and offer substantial dock cushioning. They have a molded-in inflation valve that is available in corners and straight mounts to adjust the specific level of firmness you need. Our dock wheels come with heavy-duty hot-dipped galvanized hardware for easy installation.

Dock Edging

Taylor Made has a wide variety of dock edging applications that protect your boat from taking on any damage from contact with sharp edges and corner of docks, piers or floats. EPDM rubber and commercial-grade vinyl dock edging are easy to install and tolerate harsh UV-rays and the marine environment.

Piling Caps

Protecting dock pilings from water damage or bird nests can be prevented with Taylor Made piling caps. These dock caps are made with strong polypropylene that will protect your dock or pier pilings. These piling caps give your dock a more finished look.

Product description

Boat balls are a great alternative to regular fenders when tying your boat up to other boats or the dock. They are easy to inflate by mouth or with a hand pump and then they easily deflate to store. So if you plan to have a good time in party cove you better GET A PAIR!

It is about 20lb if the A25 ball is full filled with the wather and 30lb if A29 ball is full filled with wather.

1.In order to save freight for clients,we will deflate the PVC boat fenders /buoys.So the clients need to inflate it after received. We will give special inflating needles

2.Insert the inflating needles into the centre hole of the valve.If it is difficult to insert the inflating needles,do not force to .You can change the angle and try again.

3.Please do not inflate too much air,because when in summer,the weather will be hot,and the air will expand.So it is better to reserve some space for it. Use your finger to press the surface,it can down a little easily,then it is ok. The recommend inflation is 2 psi, about 0.013Mpa.

• Quanity: 2pcs,D9.8 * H12.2 INCH
• *Best quality environmental protection raw material(PVC),UV-Protected. The products do not fade.1 year warranty.
• *The scope of application: Small boat / yacht / boat dock / yacht dock ,also can be use as floater / navigation buoy / mooring buoy / water safety buoy .
• *The boat fender is deflated when shipped, buyers need inflate by them selves.we give specialized inflating needles for free. Please do not inflate too much air.It is better to reserve some space for it. Use your finger to press the surface.It can down a little easily.The recommend inflation is 2 psi, about 0.013Mpa.*The boat fender is deflated when shipped, buyers need inflate by them selves.we give specialized inflating needles for free. Please do not inflate too much air.It is better to reser

User questions & answers

Question:	How are you supposed to fill with water?!?!!? The hole is too small
Answer:	Get a large galvanized washer that chain will fit through place it under the shackle
Question:	What is the Correct size buoy for 30-40 foot boat
Answer:	The buoy is polyethylene. It is filled with closed cell foam. The center rod is hot-dipped galvanized steel.
Question:	Do they ship them inflated or not
Answer:	This page is suppose to show a buoy. Please visit www.taylormadeproducts.com We will contact this seller to have the image updated.
Question:	What type of pump is used to inflate? Basketball style needle? Or inflatable-style air-pump
Answer:	I did attach mooring lines to the top. If I attached to the bottom they might tangle with weight attached to bottom.

Product description

The sole purpose of the mooring buoy is to support the mooring chain. The two preferred designs for mooring buoys are a traditional buoy with hardware or a buoy with a tube through the center. Both offer reliable flotation and will last for several seasons, depending upon the salinity of the water. Obviously, freshwater applications will extend the useful life of any mooring system. A permanent mooring system, when properly designed, should securely position a boat so that it can be left unattended, with little attention, for long periods of time. Each system usually consists of a mooring buoy (to float the chain), a mooring anchor and a length of chain (running between the anchor and the mooring buoy). Also the proper ground tackle includes correct sized galvanized shackles and swivels. Always keep in mind, that the mooring system is only as reliable as the "current" conditions of the environment. All Taylor Made Sur-Moor Buoys are built to withstand the constant abuse of most mooring environments.

• Hard skin mooring buoys have a seamless and tough one-piece polyethylene shell
• Hard skin shells feature ultraviolet light absorbers for long-term life under the sun, and have a sandblasted finish which allows the buoy to be easily painted for identifying
• Filled with EPS foam to positively displace water
• Tube-through-the-center design with blue reflective striping
• 2 inch tube diameter, 38 inch circumference, 30 lbs buoyancy
• Three year flotation warranty

User questions & answers

Question:	Why isn't the diameter of the tube 2,2.5,3 inch given in the description? Plus what max size chain is accepted
Answer:	Well, i actually didnt use a collar. The inner lining is very rugged. With the use of a large shackle, it just sits on top of the inner/center through tube. Highly recommend mooring ball!
Question:	This is the second one sent to my home. There has been no hardware, just the bouy. Is the hardware included? It shows it in the picture and descripti
Answer:	No, It is not reflective. Make sure that you order a wear bushing for the bore of the buoy. It does not come with one.
Question:	Would this support the weight of a person if used as a tree swing
Answer:	#46818 has an approximate buoyancy of 100 lbs. Buoyancy rating: The number indicated (100 lbs) is the maximum floatation the buoy provides while fully submerged. 50% of this value will be the weight the buoy can support at the level of the blue stripe.

Product description

Heavy duty construction to meet the punishing demands of the commercial marine industry.

The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.

• Recommended boat size - 70 to 80 Feet
• Made in the USA for heavy duty marine applications
• Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles
• Tri-valve for easy inflation with football needle or compressor
• Constructed from flexible and resilient marine grade vinyl
• Tuff End fenders feature a seamless one piece construction, the strongest in the industry

User questions & answers

Question:	product description is 50 x 34 x 34 inches but title is 21 inches. What are the real dimensions
Answer:	uses a needle but need air pump, basketball pump would take forever. plastic is thick and harder to blow up. great quality

Product features

EYELET

Eyelet shape designed with a taper to allow the attachment of a standard shackle

TRIVALE

Allows custom inflation with football needle or compressor

STRENGTH

Designed to perform under the most demanding conditions

Product description

Heavy duty construction to meet the punishing demands of the commercial marine industry.

The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.

• Recommended boat size - 80 to 100 Feet
• Made in the USA for heavy duty marine applications
• Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles
• Tri-valve for easy inflation with football needle or compressor
• Constructed from flexible and resilient marine grade vinyl
• Tuff End fenders feature a seamless one piece construction, the strongest in the industry
• Feature large line holes that will accept most ropes and standard shackles

User questions & answers

Question:	This says it is 27" diameter, does anyone know how tall it is
Answer:	Not inflated.

Product features

EYELET

Eyelet shape designed with a taper to allow the attachment of a standard shackle

TRIVALE

Allows custom inflation with football needle or compressor

STRENGTH

Designed to perform under the most demanding conditions

Product description

Heavy duty construction to meet the punishing demands of the commercial marine industry.

The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.

• Recommended boat size - 60 to 70 Feet
• Made in the USA for heavy duty marine applications
• Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles
• Tri-valve for easy inflation with football needle or compressor
• Constructed from flexible and resilient marine grade vinyl
• Tuff End fenders feature a seamless one piece construction, the strongest in the industry

User questions & answers

Question:	What is the over all height of the buoy? 18"x
Answer:	5/8” shackle will fit.
Question:	What size do I need for 1/2 top chain on a mooring
Answer:	Yes you can deflate them, they have a screw out asssembly were you inflate it so you can deflate quickly.I have a 30 foot boat and the 15 inch works great for me.
Question:	What size of shackle will fit into 18” buoy? Tnx
Answer:	If you fill them with water they’ll sink. Use a pump and fill them with air.
Question:	Can you Deflate them too for storage? What size recommended for a 31' boat
Answer:	Not inflated.

Product features

EYELET

Eyelet shape designed with a taper to allow the attachment of a standard shackle

TRIVALE

Allows custom inflation with football needle or compressor

STRENGTH

Designed to perform under the most demanding conditions

Product description

KUFA Yellow/Black 12” Diameter (inflated size: 12"x15" ) 3mm Thickness PVC make it durable enough in the open sea. Easy inflation with ball needle or air compressor. (not included) Great for use as a mooring buoy, Anchor lift buoy or any kind of marking buoy for pot and gear.

• KUFA Yellow/Black 12” Diameter (inflated size: 12"x15") Vinyl Mark Buoy
• Made by 3 mm thickness UV Resistant Vinyl, Net Weight: 2Lb
• Easy inflation with ball needle or air compressor. (not included)
• Perfect for shrimp and prawn trap.
• Great for use as a mooring buoy, Anchor lift buoy or any kind of marking buoy for pot and gear

User questions & answers

Question:	How can I fill it up with water
Answer:	I does not. It is inflated and has no stem.
Question:	how many pounds of lift does Kufa 12" ball have
Answer:	Hi Claire, Yes it will stay inflated in the water all season. Thank you!

Product features

KUFA Yellow/Black 12” Diameter (inflated Size: 12" x 15") Mark Buoy Mooring Buoy Anchor Lift Buoy Shrimp Trap Buoy A30Y

• KUFA Yellow/Black 12” Diameter (inflated size: 12"x15") Vinyl Mark Buoy
• Made by 3 mm thickness UV Resistant Vinyl, Net Weight: 2Lb
• Easy inflation with ball needle or air compressor. (not included)
• Perfect for shrimp and prawn trap.
• Great for use as a mooring buoy, Anchor lift buoy or any kind of marking buoy for pot and gear

Product description

Boat balls are a great alternative to regular fenders when tying your boat up to other boats or the dock. They are easy to inflate by mouth or with a hand pump and then they easily deflate to store. So if you plan to have a good time in party cove you better GET A PAIR!

It is about 20lb if the A25 ball is full filled with the wather and 30lb if A29 ball is full filled with wather.

1.In order to save freight for clients,we will deflate the PVC boat fenders /buoys.So the clients need to inflate it after received. We will give special inflating needles

2.Insert the inflating needles into the centre hole of the valve.If it is difficult to insert the inflating needles,do not force to .You can change the angle and try again.

3.Please do not inflate too much air,because when in summer,the weather will be hot,and the air will expand.So it is better to reserve some space for it. Use your finger to press the surface,it can down a little easily,then it is ok. The recommend inflation is 2 psi, about 0.013Mpa.

• Quanity: 1pcs,Size :D9.8 * H12.2 INCH
• *Best quality environmental protection raw material(PVC),UV-Protected. The products do not fade.1 year warranty.
• *The scope of application: Small boat / yacht / boat dock / yacht dock ,also can be use as floater / navigation buoy / mooring buoy / water safety buoy .
• *The boat fender is deflated when shipped, buyers need inflate by them selves.we give specialized inflating needles for free. Please do not inflate too much air.It is better to reserve some space for it. Use your finger to press the surface.It can down a little easily.The recommend inflation is 2 psi, about 0.013Mpa.

User questions & answers

Question:	I bought 3 of the 17.8 in blue in april 6 for $44 each. why has the price now doubled? how may i order three more please
Answer:	There’s no hardware just the buoy. But this is better because you can put a large shackle on top that won’t fall through. The other buoys that have a rod through the middle are known to fail (so I’ve heard). With this you can see the condition of your shackles and chain and prevent an issue before it happens. I’ve had this buoy for like 6 years now and it’s been great.
Question:	when will the largest blue ones be available please
Answer:	I would say it was more of a question of what kind of rope you use . II would say that it would hold the weight of a person as long as you had the proper rope connected to it
Question:	How do you take the air out
Answer:	If you fill them with water they’ll sink. Use a pump and fill them with air.
Question:	On the A38 buoy, is the hole on the bottom, or the top. The picture shows a folded up buoy, but does not specify if the hole is on the top or bottom
Answer:	16 inch ball

Product description

Heavy duty construction to meet the punishing demands of the commercial marine industry.

The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.

• Recommended boat size - 40 to 50 Feet
• Made in the USA for heavy duty marine applications
• Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles
• Tri-valve for easy inflation with football needle or compressor
• Constructed from flexible and resilient marine grade vinyl
• Tuff End fenders feature a seamless one piece construction, the strongest in the industry

User questions & answers

Question:	Can you fill this with water? It's supposed to be the exact same material as a aqua head hunter punching bag I have read
Answer:	The hole is on the bottom.
Question:	How do you fill the buoy with air? I've tried to remove the screw valve with & without needle (pump does work
Answer:	37" from bottom to top of black ear.
Question:	Do you remove the inner plug or just stick the needle directly in
Answer:	Inflated it is 21” wide. Great buoy.
Question:	Does buoy come with shackle (as in picture
Answer:	good question as it needs to be stated somewhere, I ordered the wrong one the first time......my 15" ball takes a 2" sleeve and I used 3/8" chain through it with no issues and room for larger chain if so needed.

Product features

EYELET

Eyelet shape designed with a taper to allow the attachment of a standard shackle

TRIVALE

Allows custom inflation with football needle or compressor

STRENGTH

Designed to perform under the most demanding conditions

Product description

Protect and extend the life of your mooring buoys with the Taylor Made Mooring Collar. It is specifically designed to prevent the anchor chain from scraping against the neck of your mooring buoy as it is sitting on top of the water. This collar will limit the wear and tear that can quickly damage the neck of the buoy, and won’t harm the buoy’s anchor chain on your shackle. Our mooring buoy collar is compatible with the 12” and 15” diameter Taylor Made T3C mooring buoys and any buoy with the center tube design. It will help shield the top edge of the pipe from wear and tear. It will work fine in the shackle and taper buoys so long as the appropriate size collar is chosen for the tube.” The wide collar fits most standard shackles and installation is easy and quick. You slip the collar into the top of your 2”, 2-1/2” or 3” diameter Taylor Made Sur-Moor buoy center tube, run the anchor chain up and simply attach your shackle. Hardware is not included. The T3C mooring collar is made from hot-dipped galvanized steel for a sturdy and secure hold. The collar is corrosion resistant and will tolerate the harsh and damaging marine environment as it works to protect your mooring buoy.Taylor Made is a proud member of the Lippert family, a global manufacturer and supplier of engineered products for the RV, marine, automotive, commercial vehicle, and building products industries. At Lippert, our commitment to our customers is always moving forward, always making your experience better. Choose Taylor Made®.

• Protective collar prevents anchor chain from damaging the neck of mooring buoy
• Extends the life of mooring buoys
• Simple installation
• Wide collar fits standard shackles
• Constructed from hot-dipped galvanized steel that is sturdy and corrosion resistant
• Hardware not included
• Made in the USA

User questions & answers

Question:	What prevents this collar from riding up and out of the sleeve, and maybe resting at an angle not fully seated in the center tube
Answer:	bouy does not come with shackle
Question:	What is the best cable for Mooring buoy
Answer:	I am sorry for that. Because it is sent from China now, the shipping charge is much higher than sent from amazon warehouses. It is 225 for 3. If you are not in hurry, we advise you buy them after the middle of the Augest.
Question:	Looking for this in different size...do they come in different size? Need approx 1" size whole in taylor made tramsom fender
Answer:	We have the largest blue ones at my local warehouses in China now. It will take 15 to 25 days for shipping to US. It is available at amazon warehouses in middle of August.
Question:	do you need one for the top and one for the bottom of the bouy
Answer:	Stick a needle in the hole not attached to the pump

Product features

Taylor Made Anchoring and Docking

Unrivaled quality. From the first custom canvas piece created in 1908 by Nelson Taylor, Taylor Made has been setting the standard for design and product excellence in boat fenders, buoys, dock products, and a wide variety of other boating accessories. Boaters everywhere trust the Taylor Made brand to deliver top-performing, high-quality products for their marine needs. Taylor Made is a proud member of Lippert, a leading, global manufacturer and supplier of highly engineered products and customized solutions dedicated to shaping, growing, and bettering the RV, marine, automotive, commercial vehicle, and building products industries. Whether you're on the road or the water, our team is always thinking about your next journey, pushing the possibilities of our products, all to better your time spent outdoors, whenever, wherever, for years to come.

Fenders

Taylor Made knows fenders. For more than 60 years, Taylor Made has been protecting boats of all sizes. Boaters rely on innovative engineering and superior design in every fender made, whether for a yacht or personal watercraft and everything in-between.

Fender Covers

Fenders protect your boat, but what protects your fenders? Our fender covers not only provide maximum protection to your boat without scuffing or marring the gelcoat they also extend the life of your fenders.

Fender Adjusters

Boaters need to quickly and easily adjust their boat fenders when approaching unfamiliar docks, rafting, and mooring. Taylor Made has designed a range of fender adjusters to take the worry out of dealing with awkward knots and effortlessly adjusting fenders to the exact height needed.

Marker Buoys

Taylor Made marker buoys help identify safety areas, guide boats into channels, mark water ski courses, and a great fishing spot. Our marker buoys come in highly visible colors and can take on heavy-duty applications and the rigors of a marine environment.

Mooring Buoys

Built tough with a hard, polyethylene skin, our mooring buoys have ultra-violet light absorbers for long-term life in the sun. The blue reflective stripe offers high visibility day or night. Many buoys have a tube-through-the-center design allowing your anchor chain easy pass-through for mooring applications.

Buoy Accessories

Taylor Made boat buoy accessories help your buoys perform when and where you need them the most. From mooring collars to replacement hardware, these accessories are tough and durable. They are designed to work with Taylor Made buoys as well as other buoys with the center tube design.

Dock Boxes

Boaters need a convenient, dry and safe place to store life jackets, cushions, fishing gear and more. Taylor Made fiberglass dock boxes are coated with a durable UV gelcoat finish with a solid foam core that contains no trapped air, making it more resistant to water and odors. Gas shocks are standard with our fiberglass boxes that keep the lid open in high winds and are easy to close.

Dock Carts

Taylor Made has designed a reliable way for boaters to get their gear from their vehicle to their vessel with their dock carts and designed with an easy-to-use handle that minimizes leaning when transporting from one spot to another. The angled-up tub allows for more leg clearance and no bumping into your shins. These carts are versatile and can be used for marine and other applications such as gardening or lawn work.

Dock Steps

Getting on and off your boat should not be a challenge. Taylor Made dock steps have a non-slip pad for maximum protection for a secure and safe entry and exit to any vessel in dry or wet conditions. These dock steps are available in single, double and triple treads and are easily mounted to any dock.

Dock Wheels

Taylor Made dock wheels are a great protector and offer substantial dock cushioning. They have a molded-in inflation valve that is available in corners and straight mounts to adjust the specific level of firmness you need. Our dock wheels come with heavy-duty hot-dipped galvanized hardware for easy installation.

Dock Edging

Taylor Made has a wide variety of dock edging applications that protect your boat from taking on any damage from contact with sharp edges and corner of docks, piers or floats. EPDM rubber and commercial-grade vinyl dock edging are easy to install and tolerate harsh UV-rays and the marine environment.

Piling Caps

Protecting dock pilings from water damage or bird nests can be prevented with Taylor Made piling caps. These dock caps are made with strong polypropylene that will protect your dock or pier pilings. These piling caps give your dock a more finished look.

Product description

Buoys Type: Mooring Color: White with blue stripe Diameter: 12" Material: Vinyl Number: 703882Hot-dipped galvanized steel. Blue stripe is reflective for nighttime visibility. Three-year flotation warranty on all hard skin buoys

• Number: 703882
• Buoys Type: Mooring
• Color: White with blue stripe
• Diameter: 12
• Material: Vinyl

Product description

KUFA Red/black 12" diameter (inflated size: 12"x15") vinyl mark buoy made by 3 mm thickness UV resistant vinyl easy inflation with ball needle or air compressor. (Not included) net weight: 2lb great for use as a mooring buoy, anchor lift buoy or any kind of Marking buoy for pot and gear

• KUFA Red/black 12" diameter (inflated size: 12"x15") vinyl mark buoy
• Made by 3 mm thickness UV resistant vinyl
• Easy inflation with ball needle or air compressor. (NOT included)
• Net weight: 2lb
• Great for Use as a mooring buoy, anchor lift buoy or any kind of marking buoy for pot and gear

User questions & answers

Question:	Does this item have a serial number? Asking coz it was taken
Answer:	Check the Taylor Made website. There you will find answers to your questions. Also, the West Marine website is very helpful with mounting tips.
Question:	How can you fill this with water and seal it to make it usable as a punching bag
Answer:	You only need one for the top
Question:	Want to use it as a marker, I assume I can freeze it in over the winter right
Answer:	Yes. Unscrew the valve. Fill with water to desired level. Close valve and fill remaining space with air using hand pump. I use it as a "aqua bag" punching bag. Works great.
Question:	How much weight can this float
Answer:	Use an air pump inflator needle like you would use to pump up a basketball. Note that both of my fenders had valves that leaked when I first bought them and subsequently did not hold air properly. The easy fix was to unscrew the fill valve on the fenders with a large flat-head screw driver and lubricate the fill valve with an o-ring lubricant. While a bit of a pain and yes it should have done properly at the factory, I happened to have o-ring lube so, for me, it didn't cost me a trip to the store. After the valve was lubed properly, the fenders were perfect. I've had mine filled with air about a year now and they are perfect. Another note. I'd go one size larger than their sizing recommendation. You won't be disappointed!
Question:	how much weight will this float
Answer:	You can remove the plug to rapid inflate with an air compressor. The needle valve is perfect for making a small adjustment.

Product features

KUFA 12" Diameter (Inflated Size: 12" x 15") Mark Buoy Mooring Buoy Anchor Lift Buoy A30, Red/Black

• KUFA Red/Black 12" diameter (inflated size: 12"x15") vinyl mark buoy
• Made by 3 mm thickness UV resistant vinyl
• Easy inflation with ball needle or air compressor. (Not included)
• Net weight: 2lb
• Great for Use as a mooring buoy, anchor lift buoy or any kind of marking buoy for pot and gear