11 best marine navigation lights

Product description

Light Armor bi-color stowaway pole light NV6LC2-10-7 has Red/green navigation lighting and an integral task light to light the foredeck when needed. The light Armor brand lighting delivers top-quality materials, robust construction, durability, and sleek design to meet boaters needs and boating styles. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.

• 2 nautical mile visibility Red/green bow mount pole light incorporating Attwood newest LED technology
• Additional integrated White LED task light enables greater function with a narrow beam work light
• Easy plug in design incorporates top-quality materials and robust and sleek design
• Simple removal and stowaway enables a clean deck for greater access to bow or trolling motor
• Three-pin Connector fits Attwood light arm or plug in bases

User questions & answers

Question:	does this light have a three pin connection
Answer:	Do not know, call vendor for instruction
Question:	Does this come with the 3 pin base
Answer:	I used on a Basstracker pro team 18 and install it about 2 inches from the center
Question:	Will this fit a 2014 bass tracker 17.5 tf
Answer:	Just to completely remove transparent compound and PCB with the LED soldered on
Question:	Can the task light be turned off independently
Answer:	Green: 31 lumens Red: 19 lumens

• Specification: Voltage - DC 12V; Power – 3W; Product Dimension - 3.1x 3.9 x 1.7 inches; Radiation angle - 225 degrees;
• Giving more extra visible and safe : With a proprietary optical design, the red and green lenses are housed in a diecast triple chrome plated Zinc cover. Ideal for late night boating, these bi-colored lights pierce through fog and mist making certain you are safe and visible. Meets USCG Requirements for 2 nautical mile visibility.
• Durable housing cover design: Comparing with Chrome Plated Zinc housing cover passed 72 hours salt spry test. It can avoid corrosion problem.
• Innovation LED optical design: The bi-color navigation light uses innovation LED optical design and it guarantees the bright level of the navigation light but also the it can maximum reduce the heat of the light to last its’ lifetime.
• IP 67 Waterproof design: The built in high-density hot melt glue can completely avoid water get into the internal of the light which purposes to short circuit issue.

User questions & answers

Question:	What is the length of the wires
Answer:	Yes about 3/16 in if I remember, it is a very bright light.
Question:	Can the lens be swapped so it can be mounted upside down under a pulpit like Perko's can
Answer:	Dont know lumens, but it's very bright and I was impressed with how bright blue it is. Love how it looks on my boat.
Question:	Does it come with stainless screws
Answer:	I am not sure. Maybe you could check with the mfg? The description doesn't say so. They are inexpensive, so hook one up to led dimmer, must be LED dimmer, and see if it works. Good luck
Question:	is there any space under the light for the electrical connection? I have a wire coming directly out of a flat surface
Answer:	There is red/black on each end but once cut you can not add power back. However you can cut and use second end somewhere else.

Product features

Why boat navigation light is important?

The primary function of marine navigation lights is to aid prevention of any major accident from happening. All boats – whether big or small are required to have night lights as a part of the navigation systems.

Boat Navigation Light Guide:

For powered boats less than 39.4 feet.

All-around white light that you can see from 360 degrees and from two miles away;

Red and green sidelights that are visible at 225 degrees and from one mile away.

IP67 waterproof Deisgn

The IP67 waterprooof design can avoid pouring rain or strong wind's issue that causes electric short circuit.

Anti-corrosion Chrome plated zinc housing cover

Chrome plated zinc cover passes 72 hours salt spray test. Comparing with others' brand, it has better performance on corrision.

3W LED innovation optical design

Super Bright 3W LED opitcal design can achieve 2 nautical mile visibility's requirement. The professional 225° view angle design meets USCG requirement.

Obcursco, your best boat guard!

Obcursco is committed to best quality marine accessories to meet fishing, boating and watersport's demand in the worldwide. Obcursco focus on deliver a wide range of boat product like boat dock line, boat navigation light, water sport rope to customer while remaining affordable. Obcursco, your best boat guard.

Package Contents:

1 x Navigation Light

2 x Mounting Screw

1 x Installation Guide

Product description

Osinmax uses new technique bright LED bead to build it. High bright LED bead design can can provide clearly running signal to boat that on opposite side from far away 2NM, which also meets USCG legal provision. High bright LED design not only can give high visibility signal to running boat to avoid boat accident. Also, LED design can save boat light power energy and increase its service time.

Comparing with old class tungsten light, Osinmax LED boat navigation light is the leader of this industry. Furthermore, Osinmax boat navigation light is fully waterproof that achieves IP67 waterproof level. The build-in high-density foam silicone rubber sealing ring can totally and effectively stop water invade to light internal to protect its internal structure and function that will not damaged by water.

Features:

* IP67 Waterproof

* Super easy to install

* Wide use application

* Low energy consumption

* New technique LED bead

* High visibility achieves 2NM

Package Includes:

2 X LED Navigation Lights (1 Green+ 1 Red)

1 X Gasket

1 X Manual Guide

• Boat light features: Voltage-DC 12V; Power-3W; Product Dimension-4x2.5x1.4 inches; Radiation angle-112.5 degrees.
• Meet USCG requirement: New technique LED optical red and green LED light design provides 2NM high visibility running signal to oncoming target, which also meet USCG requirements.
• IP67 waterproof: Build in high-density foam silicone rubber sealing ring can completely avoid short circuit that causes by water.
• Power saving: Comparing with halogen lamp, LED bead has brighter light power, lower energy consumption and longer service life.
• Easy to install: Super easy to install that boat navigation light only need a screwer to install it.

User questions & answers

Question:	Does it break if you step on it
Answer:	Plastic I don't know never stepped on them
Question:	I want to upgrade the lights on my Rinker 270 cabin cruiser will these work
Answer:	Works on my 270 sea ray.
Question:	I would like to buy it with a silver finished but the pictures on your advertisement show the pictures in the wrong place
Answer:	Mine came in silver
Question:	How many amps will these draw
Answer:	Not enough to worry about.

• Please buy with confidence, we offer "ONE YEAR" warranty on item(s) damaged during delivery or have a confirmed manufacturer defect.
• Features: These New LED Boat Navigation Lights Includes One 3.8" Red and One 3.8" Green LED Strip. More Stylish and Effective than Standard "Pole Style" Navigation Lights.
• PC lens, Waterproof, Shock Proof, Dust Proof. Fit for Navigation Light, Bow Light, Stern Light, Port Light and Starboard Light. Common use for Small Boat, Sailboat, Pontoon Boat, Kayak.
• Longer Lifespan: Energy-saving, low temperature, low power consumption, Longer Lifespan over 50,000 hours.
• Easy to Insall - 2 Wires Connection: Black is Negative and another is Positive. FREE screw set & Foam tape bases are included.

User questions & answers

Question:	How long are they
Answer:	No.
Question:	For those who have used on a boat, are they visible from a mile out
Answer:	It just sticks right into the hole at the back end of the boat.
Question:	What material are these lights made of? I am trying to find plastic that will hold up to a marine environment
Answer:	Maximum weight would be 100lbs
Question:	where are the installation instructions
Answer:	As the picture, this model does not come with a backrest

Product description

Waterproof: IP66

Red & green bow LT. 225°

Voltage:DC 12V

Wattage:2W

1-NM of visibility

LED Lifetime: 50000hrs

• Very bright Provides 112.5 degrees and 1-NM of visibility
• Intended for use on boats of up to 39.4 feet in length
• Durabal and resist in the saltwater environments
• LED light with stainless steel high quality polished cover
• Durabal and resist in the saltwater environments

• [Product Dimensions]: 4.09 x 2.52 x 1.34 inches; Voltage: DC 12V-24V; Wattage: 3W
• [Easy to Installation]: Easiest, Cleanest installation. Just need a wire to install, includes rubber mounting gaskets. Then it will be the best boat light you've ever bought.
• [High Quality and Longevity]: These lights made of excellent ABS Material with sealed LED units resist water intrusion and 100% WATERPROOF design. In the true sense realizes strong durability, long lasting life and low power consumption.
• [Brilliantly Bright& Perfect Design]: A perfect blend of value, bright and style. These lights adapt the LED bulb with red and green color. They are bright enough to be seen by the Coast Guard, Ferry's or oncoming vessels without worry.
• [Wide Range of Application]: Works well on touring car & boat, pontoon, fishing boat, speed boat and other boats. Use for bow, stern, or running lights. They provide simple and effective boat safety lighting but would not influence your boats appearance.

User questions & answers

Question:	Do i understand it correctly that these units do not feature replaceable led bulbs, and that you need to start over when the lights go out
Answer:	Correct most led lights are that way. I have had mine on for years and still work just fine. I would rather replace the whole thing since in saltwater the connections to the bulbs always rust out anyway.
Question:	They fit on a 06 Proline 19 sport
Answer:	They’ll fit on anything you want to put 2 holes in.
Question:	can they be mounted on side of your boat
Answer:	Hi: This is Obcursco customer service team. The Obcursco LED boat navigation light can be mounted on the side of the boat. But, we suggest user could mount the boat navigation light on the surface of the deck because it can enhance the visibility of the boat that is approaching. Thank you
Question:	Are screws provided
Answer:	It has one screen that as you tighten it the rubber piece expands in the hole.

• Resist corrosion: stainless steel cover
• Specification: Voltage - DC 12V; power – 3W; dimension - base Dia 2. 4’’, height 1. 8’’;
• 1 mile bright Lamp: very bright 8 LED per blub
• Package including: 1 pair of Obcursco navigation bow lights( green & red) with 6 pieces of screws
• Perfect replacement lights: perfect for the front of Pontoon boat, Meet wildlife and fisheries regulations.

User questions & answers

Question:	who is the manufacture of these lights
Answer:	Obscuro, but they are the same size and shape as Perko lights.
Question:	Are these the same size as Perko A-16 Navagation lights
Answer:	My boat had Perko lights, not sure if they were A-16 but they did measure a 2.4" base and this fit right through the same holes and fiberglass molded stub that they sit on.
Question:	Are these Coast Guard approved? If not old deer
Answer:	Yes, USCG approved, but would not be approved if mounted facing forward, because a craft approaching from either side could view both red and green. They would have to be mounted on the sides so only one color would be seen from any other boater.
Question:	Do these come with the led bulbs or are they separate? would be nice if they could take led or incandecent
Answer:	They come with leds. They are not changeable with incandescent bulbs.

Product features

What is boat navigation light?

As with all modes of transport, the lighting systems used by the night are imperative to the vehicle’s safety. Ships, being enormous constructs, needs lighting systems too! In fact, the lighting system in place for a vessel is integral to the safe navigation of the vessel; in fact, it is one of the most important aspects of nautical studies emphasised on in college as well as for competency exams.

Why boat navigation light is important?

The primary function of marine navigation lights is to aid prevention of any major accident from happening. All boats – whether big or small are required to have night lights as a part of the navigation systems. The colour of the lights that were required to be used as specified by a set of rules passed in the UK. On the basis of this rule, three colours were chosen: red, green and white. It is the responsibility of the owner/operator of a vessel that she show the proper navigation lights for her size and the waters in which she is operating. It is not the responsibility of the manufacturer, importer, or selling dealer. Many boats are delivered with lights that do not meet legal requirements with respect to technical characteristics or placement on the vessel. Remember also, that the angles of visibility must be met when the boat is underway-if your boat rides at a significant bow-up angle, take that into consideration when installing and/or checking your lights.

Product description

Specifications:

Demension: 13'' x 1/2'' x 1/4''

Visibility Distance: 4 miles.

Light Color: We have green, red, blue, white color, your boat will look like new with our strip lights decoration, you will have a good vision on your boat.

Material: Made of ABS, sealed in silicone

Voltage: 12V

Service life: Over 10000 hours

Waterproof Rating: IP67

Led Chip Quantity: 18

Led Chip Type: 5050

Wire Length: 32 inch

Wire Guage: 22AWG

Adhesive type: 3M

LOW POWER CONSUME: Energy-saving, Low temperature, Low Amp Draw For a Longer Lifespan over 50,000 hours.

Lights are flexible for mounting on irregular surface



Installation:

Clear the place first, then install the lights with 3M adhesive. These lights are can be install in rub rail, which can protector the lights from damage and hide the lights. Also, you can mount them above the rail or below the rail.



Application:

Best idea for Boat Navigation Lights, Boat Stern Lights, Deck Lights, Courtesy Lights and Boat Interior Lights on Marine Pontoon Boat, Dinghy, Kayak, Bass Boat, Jon Boat, Trolling Motor, Yacht, and so on.



Warranty:

Warranty for 12 months from date of purchase.

• ONE YEAR WARRANTY: Buy with confidence, our product provides 1 year warranty. If any questions, please contact us directly.
• APPLICATION: DC 12V operated and with 18Pcs Germany 5050 led chips, can produce a very visible light of 4 miles, perfect to use for navigation lights on pontoon boat, bass boat, dinghy, Jon boat, kayak, yacht, and so on.
• EASY TO INSTALL: The strong Double-sided adhesive on the back of the strip lights and flexible body design enables you to mount it in any where you want, perfect to install it on the rub rail, above rail and below the rail.
• IP67 WATERPROOF: Professional marine strip lights, Raining Resistant, Washing Resistant, Seawater Splashing Resistant.
• MATERIAL: Made of high quality ABS Material, nicely sealed in silicone. 22awg wire Guage and 32inch long wire makes it a breeze to connect to your boat wire.

User questions & answers

Question:	What is the warranty period for these boat led navigation lights
Answer:	1 year warranty...They are well made and the adhesive strip is very strong
Question:	Is it 2 to a package on the none navigation lights or
Answer:	There is a red strip and a green strip in the package
Question:	Is there 2 lights when purchasing white
Answer:	Yes
Question:	Are these coast guard approved to use for navigation lights
Answer:	WARNING !!!!!! THESE LIGHTS ARE NOT USCG APPROVED BE ADVISED, THESE ARE NOT COAST GUARD APPROVED NAVIGATION LIGHTS There are two reasons that they are not approved as highlighted in USCG Safety Alerts 13-18 in regards that they can be the cause of interference with critical communication devices such as VHF Radio's and AIS Navigation & USCG Safety Alert 10-15 Failure by manufacturers to meet technical certification requirements. Furthermore, technical advances in marine lighting, such as the use of Light Emitting Diodes (LEDs), rope lighting, underwater lighting, and other various types of decorative lighting, may violate navigation light provisions of the Nautical Rules of the Road.

• SPECIFICATION: Voltage - DC 12V; Power – 3.6W per light; LED Strip Length -12’’; Wire Length – 6’; Lens Style: 5050 LED; Waterproof level – IP67.
• 1 MILE BRIGHT LED STRIP: Highly bright 18 5050 LED per strip, quick and easy installation.
• IP67 WATERPROOF: These LED strips can literally be completely submersed in water and still operate.
• ULTRA DOUBLE SIDE 3M ADHESIVE TAPES: Simply clean the mounting location before peeling and sticking to get the best application.
• PERFECT REPLACEMENT LIGHTS: Perfect for the front of Marine boat, meet wildlife and fisheries regulations. Great boat accessory gift!

User questions & answers

Question:	Do these have adhesive on them or do the screw in
Answer:	WARNING !!!!!! THESE LIGHTS ARE NOT USCG APPROVED BE ADVISED, THESE ARE NOT COAST GUARD APPROVED NAVIGATION LIGHTS There are two reasons that they are not approved as highlighted in USCG Safety Alerts 13-18 in regards that they can be the cause of interference with critical communication devices such as VHF Radio's and AIS Navigation & USCG Safety Alert 10-15 Failure by manufacturers to meet technical certification requirements. Furthermore, technical advances in marine lighting, such as the use of Light Emitting Diodes (LEDs), rope lighting, underwater lighting, and other various types of decorative lighting, may violate navigation light provisions of the Nautical Rules of the Road.
Question:	How exactly do I power these up? Came with no instructions. I have a marine battery with cigarette lighter receptacles
Answer:	I am not sure, I think the wires are copper No. 12. The LED lights use 18 watts. I mounted my lights on the top of a 15 ft. mast on my boat and they work perfectly with the 25 ft. run of 12 Ga. wires
Question:	What is the width and thickness of the lights
Answer:	I have had these four inchers for one year. I use these in conjunction with my low beams. I had a 12 incher but got too many complaints so I installed these 4 inchers and the complaints were reduced drastically. Get the wiring harness separately for appx $8 here on Amazon. I drilled my bumper about 2.5 feet apart and focus them appx 15 to 20 degrees down. Still has plenty of light spread without to much bother to others'. I run 420 miles 5 days a week and 96% of eighteen wheelers use the same or something similar. So I would get used to it and grab a pair for yourself. After one year of constant use the lens are not as clear as they were when new but still emits awesome light. later...
Question:	Are these light us coast guard approved navigational lights
Answer:	You should be able to. The lights don't use a lot of power. I would look for a cigarette plug that has a heavier wire. Not the things one. You should be good.

Product description

Osinmax is a professional boat navigation light manufacturer. Concentrates on provide high-performance, high visibility but durable running signal to our customer.

Osinamx Boat navigation light uses ring-shaped super bright LED design, 225 degree ring-shaped design meets bi-color boat navigation light requirement, which can provide wider high bright visual angle to user. Also, bright LED design is brighter than tradition old class boat light, meanwhile, LED bead also can enhances working time and saves power energy.

Considering about boat navigation light will always uses under moisture environment, boat navigation light uses high-performance waterproof xx to avoid short circuit problem. It can completely avoid water invade inside boat light internal to protect internal structure.

Specification

Housing Material: Plated Zinc+ABS

LED QTY: 18PCS (9pcs green+9pcs red)

Voltage: DC12V

Wattage: 6W

Waterproof: IP67

Angle of Visibility: 225°

Distance of Visibility: 2NM

Item Size: 3.54x3.94x1.97in

Item Weight: 0.6lbs

Package included:

1 X Osinmax Boat Navigation Light

1 X Operation Guide

• High corrosion resistance: Durable chrome plated zinc housing construction passed 72 hours salt spray test can enhance working life.
• High visibility light signal: Innovation surround lamp bead optical design gives high visibility light signal also meets USCG Requirements for 2 NM visibility.
• IP67 waterproof: Precise edge sealing design within built in high-density hot melt glue can completely avoid water vapor intrusion that causes short circuit.
• Specification: Voltage - DC 12V; Power–6W; Product Dimension - 3.1x 3.9 x 1.7 inches; Radiation angle - 225 degrees.
• Easy installation: Super easy to install.

User questions & answers

Question:	How far apart, center to center are the 2 mounting holes
Answer:	It is 6.7cm
Question:	Does this work with Bayliner F
Answer:	I think that it would work with anything. We put it on our pontoon boat

• Material:ABS&Stainless Steel
• Water and dust proofing:IP 65, LED Light with 2.5W
• Voltage: 12-24V Daylight White: 4000-4500K
• For use on boats up to 65.6ft (20m)
• Young Marine Service: 1-year warranty

User questions & answers

Question:	What size fuse should I use
Answer:	Hello, Lifting up the hinged top allows you to dump most of the whiskers out. There is a small brush with which to clean out any remaining whiskers. Or Just flip open the shaving head and wash/rinse the exposed cutting assembly with warm tap water. Keeping the shaving head open, let dry. It is easy to used!

Product features

Navigation Anchor Lights All Round 360° White LED 12-24VDC

The corrosion-resistant, durable collapsible base can be provided at any Angle, free to change 180°, you can install freely on any inclined plane or plane of your ship.To keep it upright.

The 9 "stainless steel support rod is specially reinforced to provide protection against severe weather.

YOUNG MARINE Navigation Anchor Lights can be flexibly applied to ships of 12 volts or 24 volts, with a wider range of voltage applicable to most ships

Abjustable Base

The 180-degree base can be freely rotated to reduce the limitation in the use process. You can freely swap the angles to install on different surfaces, which can always achieve the effect of upright state, or become any Angle you want to use

ABS&Stainless Steel

The base and lampshade are made of Corrosion resistant ABS material, and the solid material can make the lamp more durable. The base will be firmly fixed, which is especially excellent in the severe weather of strong wind and heavy rain.

Daylight White: 4000-4500K

The bright Daylight White effect provides The required source of light on The ship, and The lighting effect is suitable for The needs of more ships.