10 best boat trailer jacks

Product description

The powerful REESE Towpower Trailer Jack fits tongues 3” to 5” and helps effectively raise and lower trailers with a capacity up to 1,000 lbs. Operating with a 1:1 gear ratio, the side-winding handle with a wire-grip knob allows for fast and smooth usage while a heavy-duty swivel mechanism and pull-pin release make it easy to access the device when you need it, and store it away when you don’t. For added mobility, this jack includes 6” wheel that glides easily and lowers the friction to help you move a trailer into position with minimal effort.

• Features 1000 pound capacity
• Side winding handle with 1:1 gear ratio provides fast operation
• Heavy duty swivel mechanism for easy use
• 6 inch wheel to move your trailer into position for easy hook-up
• Fits tongues 3 inches to 5 inches

User questions & answers

Question:	If "Overall height 23 -1/5" Retracted Length 12-3/4"" is correct, then wouldn't the max lift be 10 3/4"? That would not be enough lift my use
Answer:	I haven't done any measurements on my trailer lift but your figures seem accurate from my use of said lift.
Question:	drill press
Answer:	No, the bracket that comes with it is plenty stout enough to attach to the tongue.
Question:	does it come with installation hardware like brackets and screws
Answer:	Yes, it does. It comes with long bolts and brackets so you are able to "sandwich" the frame of your trailer between the brackets and the unit.
Question:	what is the overall length when retracted and when open to maximum
Answer:	Overall height 23 -1/5" Retracted Length 12-3/4" Max Lift 22-7/10"

Product features

REESE Towpower - High Capacity for Easy Up and Down

The REESE Towpower Trailer Jack fits tongues 3” to 5” and supports a wide variety of vehicles with a capacity up to 1,000 lbs. Operating with a 1:1 gear ratio, the side-winding handle with a wire-grip knob encourages fast, smooth usage.

Swivel-Design for Easy Stowing

Heavy-duty swivel mechanism is designed to help you safely and easily stow away the jack in between uses. Use the pull-pin release to quickly access the jack when you need it, or store it away when you don’t.

1,000 Lb. Capacity

The REESE Towpower Trailer Jacks fits tongues 3” to 5” and helps easily raise and lower trailers with a capacity up to 1,000 lbs.

Swivel Access

Heavy-duty swivel mechanism with a pull-pin release makes it easy to access the jack when you need it, and store it away when you don’t.

Operates In Seconds

Side winding handle with a wire-grip knob operates with a 1:1 gear ratio for fast, smooth usage. Sturdy 6” wheel helps to easily move your trailer into position.

REESE

Founded in 1952, REESE has become a household name in the heavy-duty towing industry and a market leader in automotive and recreational product solutions. With proven designs that exceed the industry standards, we are the brand of choice when performance is the expectation. REESE caters to the towing needs of everyone from recreation enthusiasts to heavy-duty agriculture users by manufacturing the largest selection of receiver hitches; ball mounts and hitch balls; trailer and hitch locks; couplers, jacks and winches; and electrical and lighting components. For us, performance, safety, and durability are always front and center. They’re the reason why people ask for REESE by name.

Product description

Maxxtow trailer and farm jacks are perfect for all your recreational, marine and farming applications. Heavy duty zinc plate or powder coat finish insures durability against the elements.

• Capacity: 1500 pounds
• Wind: side
• Swing back dual wheel
• Mounting Bracket Size - 6-1/2 wide x 5-1/2 inch tall

User questions & answers

Question:	Can this be welded on
Answer:	Thanks for asking Brianna. Yes the 02925 Eagle Level comes in a pack of two. If you have more questions about this of any other Hopkins product please call out Product Support team at 1-800-835-0129.
Question:	What is the height in it's shortened position and when fully extended
Answer:	Packaging indicates that it was made by Hopkins Mfg Corporation in Emporia, Kansas.
Question:	Why did the price jump 10$ for cyber Monday
Answer:	I wish it was, I had to use tape as well
Question:	Would I be able to attach one of these on each side of a watercraft trailer to jack up the trailer off the trailer tires instead of using jack stands
Answer:	Yes. Mine came with a cap that slips over the clear part to protect it from the sun. Works great in AZ.

Product features

MaxxHaul 70149 - Swing Back Trailer Jack With Dual Wheels

Constructed from heavy duty 1/8" rolled steel frame.

Has a lift range of 11-1/2" with convenient side handle.

Easily mounts to your rectangular or square shape trailer tongue.

Easily mounts to up to 3" x 5" rectangular or square shaped trailer tongue

Folds up when not in use and always ready when needed

Spring loaded lock pin

Product description

MaxxHaul trailer and farm jacks are perfect for all your recreational, marine and farming applications. Heavy duty zinc plate or powder coat finish insures durability against the elements.

• Bolt-on trailer jacks for use with utility and boat trailers
• Our Jack features a swivel or swing back bracket that allows jack to be out of the way when not in use
• Heavy duty pull pin securely lock jack into place in the horizontal or vertical position
• Trailer tongue jack has a 10" vertical lift and includes a side wind handle with swivel grip for convenient operation
• 6" diameter x 2" wide nylon wheel
• Heavy duty all steel construction with durable zinc plated finish to resist rust and corrosion
• 1000-lb maximum capacity

User questions & answers

Question:	can the wheel be replaced with a footplate
Answer:	I don't think so, Mine is a 1967 Datsun roadster.
Question:	What is the length when folded up? I have limited space on a waverunner trailer, just looking to make it easier to move round
Answer:	You can enter your make and model on your Amazon account and Amazon will let you know which parts and accessories fit your vehicle.
Question:	I am replacing a jack that bolts directly into the frame and require a 2" center vertically and 5.5" center horizontal. Will this work
Answer:	Yes no problem with room to spair.
Question:	My trailer tongue is 4”x4”... will it work
Answer:	report it to amazon ...

Product features

MaxxHaul 70148 Swing Up Trailer Jack With 1000-lb Capacity

Our MaxxHaul 1000-lb Capacity Trailer Jack is a hefty and manageable trailer accessory. The trailer jack's swivel plate allows for various mounting configurations making it easy to store and transport. Includes a built-in convenient U-shape bar handle locking handle. The jack's bolt mount system will fit up to 3" x 5" rectangular or square shape trailer tongue beams. The crank to lower and raise the jack has a swivel handle grip making it nice and steady to ensure placement accuracy. It has a 10" lift range and includes a 6" inch diameter wheel making it easy to roll heavy attachments.

Easily mounts to up to 3" x 5" rectangular or square shaped trailer tongue

Folds up when not in use and always ready when needed

Spring loaded lock pin

Product description

In our goal of being your best source for all things towing, the CURT line of trailer jacks is designed with care and manufactured with pride. CURT jacks are made with quality to promote the life and function of your trailer, and they come in several different styles to accommodate your needs, whether you are a frequenter of the boat landing, the campground, the racetrack or the field. Designed to withstand the wear and tear of frequent water exposure, CURT marine jacks are the jack of choice for the avid fisherman or boating enthusiast. Our marine jacks have a few features that make them a special addition to our trailer jack line. Unlike any of our other jacks, CURT marine trailer jacks are equipped with wheels, allowing for greater mobility and easier coupling of your trailer. Choose from models with one or two wheels. Marine jacks also have a heavy-duty pull-pin that allows them to pivot on their mounting bracket to be out of the way for travel. To protect them from corrosion and the damage of moisture, these jacks come with a zinc finish. This CURT marine jack features a weight capacity of 1,500 lbs., a travel of 10" and dual wheels with a 6" diameter. It comes with a side-wind handle and all the necessary bolt-on hardware for a complete installation. It does not matter what kind of trailer you tow -- a boat trailer, utility trailer, livestock hauler or recreational vehicle trailer -- if you have a receiver-style trailer, you will want a jack that complements its function. For a trailer jack that will not steer you wrong, CURT has the answer.

• DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue
• CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels
• EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height)
• SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place
• CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish

User questions & answers

Question:	mine won't swivel am i doing something wrong
Answer:	No youre not...I'm having the same problem Ive even tried two (2) different position on the toung...I Think two wheels is the problem
Question:	Will this bolt onto a 4 inch frame boat trailer
Answer:	Yes it has different pre drilled holes in the mounting plate for different Tongue sizes
Question:	Does it come with mounting hardware
Answer:	all hardware is their

Product features

CURT Trailer Jacks

A CURT trailer jack provides your trailer with a dependable, functional support to fully equip you for the job or adventure ahead. We offer several different styles of trailer jacks, including boat trailer jacks, A-frame trailer jacks, swivel trailer jacks and heavy-duty trailer jacks.

Having the right trailer tongue jack on your trailer can make all the difference. CURT offers the diversity of options and weight capacities to suit any towing setup.

Boat trailer jack

CURT boat trailer jacks are built to thrive under water exposure, equipping your boat trailer with a dependable support for miles to come. These trailer jacks also feature a jack wheel to give the boat trailer enhanced mobility when coupling to your vehicle or launching your boat at the boat landing.

A-frame trailer jack

A-frame trailer jacks are uniquely designed for an A-frame trailer. They feature a triangular bracket to be bolted onto the trailer tongue or welded into place. While A-frame trailer jacks do not swivel up and out of the way for travel, each is equipped with excellent vertical adjustment for easy coupling and safe towing.

Swivel trailer jack

The CURT swivel trailer jack features an integrated swivel bracket that allows the entire jack leg to tilt up and out of the way after hitching your trailer to your vehicle. CURT offers bracket-mount swivel trailer jacks and tube-mount or pipe-mount swivel trailer jacks to accommodate a variety of trailers.

Heavy-duty trailer jack

For large trailers, heavy loads and commercial jobs, a CURT heavy-duty trailer jack supplies superior lift and support capacity. We offer heavy-duty trailer jacks with support weight ratings up to 12,000 pounds. Each CURT heavy-duty trailer jack is also covered in a durable powder coat finish for maximum corrosion resistance on tough jobs.

Enhanced mobility

Each CURT marine boat trailer jack is equipped with a trailer jack wheel at the base, giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue. This makes parking easier, coupling easier and launching and positioning your boat easier.

Water-resistant

These trailer boat jacks are constructed from high-strength steel for dependable strength and are shielded in a durable zinc plating. This tough finish is optimal for water exposure, frequent at the boat landing, ensuring long-lasting corrosion resistance of the trailer jack support leg and internal components.

Safe towing

For increased safety while towing and ease of use, all CURT boat trailer jacks mount with a swivel bracket. This allows the boat jack to swivel up and out of the way for travel, providing plenty of ground clearance for your trailer tongue. The swivel design also makes setup quicker and easier with less raising of the trailer jack leg required.

Product description

Swivel Trailer Jack Double Wheel 2000 lb Tongue Twin Boat Towing 26" Length Lift



This 2,000 lbs Capacity A-Frame Trailer Jack With Dual Wheels Takes the Hassle Out of Hitching and Makes It Easy To Lift, Level, and Adjust

A-Frame Trailer Jack With Dual Wheels



Length Lift: 26"



Distance: 11"



14" screw travel and 8" drop leg travel



Height range: 15"-26''



Capacity: 2000 lbs



Lift Capacity: 4,000 lbs



Color: Zinc



Material: Steel



Back Mounting Hole Diameter: 2.25 inches



- Brand New

- Free Shipping within the Continental United States

- Same business day order processing before 12:30PM PDT

- Satisfaction Guaranteed

• This 2,000 lbs Capacity A-Frame Trailer Jack With Dual Wheels Takes the Hassle Out of Hitching and Makes It Easy to Lift, Level, and Adjust
• Length Lift: 26"
• Capacity: 2000 lbs - Height range: 15"-26''
• Free Shipping within the Continental United States
• NO installation instructions included

User questions & answers

Question:	How much does this jack weigh
Answer:	15 pounds
Question:	Will this bolt to a 6in trailer frame
Answer:	I use this on my 28 foot boat trailer and it works well
Question:	How has this jack held up
Answer:	The jack is very heavy duty and has held up well. Setup was versatile and double wheels give it better stability. A+
Question:	How "steer-able" is this trailer jack
Answer:	This jack is an absolute waste of money. Had it on a 21’ boat trailer and it didn’t last 2 months.

Product description

Fulton XPD15 0101 Trailer Jack is designed for use with marine and utility trailers. Fulton brand tongue jacks are time-tested and application-proven. Features Z-MAX 600 Superior Plating corrosion protection. Bolt-on, includes all necessary mounting hardware and 1/2" pull pin. Sturdy Dual 6" poly wheels. The Fulton brand bolt-thru swivel mount uses 3-D formed heavy-gauge steel stampings and a proprietary bushing material for a mount with minimal deflection and maximum support. Mount fits up to a 3" x 5" trailer frame. Capacity: 1500 lbs., Travel: 12", Retracted Length: 13", Extended Length: 25" (Measured Center of Mount to Bottom of Wheel) Top Clearance: 14.4" (Measured Center of Mount to Top of Jack) 5 Year Limited Warranty.

• Bolt-On Swivel Tongue Jack, 1500 lbs. capacity, with an additional 2" of travel
• Bolt-Thru mount with minimal deflection and maximum support
• 6" Dual Wheel, 1/2" swivel pull pin
• Hardware included to mount up to a 3" x 5" trailer frame
• Z-MAX 600 superior plating corrosion protection

User questions & answers

Question:	If this doesn't fit, can I return it
Answer:	Fit what? I mounts on 3 to 5 inch frames. To fit the 5 inch it is turned 90 degrees for mounting.
Question:	How good is the warranty? Mine just had the handle fall out on the way to the lake. Not acceptable
Answer:	had this happen to 3 of these jacks. The handle falls out and you are screwed........
Question:	what is the advantage or disadvantage of a trailer jack with dual (2) wheels
Answer:	It’s been an advantage for us. With a 24ft trailer, 19ft boat, 2900lbs. It’s been far easier handling the trailer to push into a tight garage opening. The single wheel originally on trailer would drag and was hard to pivot. Using a mallet to pivot the old single wheel was a pain, drag marks on drive.
Question:	How easily will this turn? What I mean is, with the wheel in straight alignment with the trailer tongue, how difficult to move the tongue sideways
Answer:	harder to turn with both wheels, a single wheel jack works better for turning.

Product description

Designed for use with marine and utility trailers, Fulton brand XP tongue jacks are time-tested and application-proven. their bolt-on versions include all necessary mounting hardware. XP 15 mount features 1/2 inch pull pin. The Fulton brand XP bolt-thru swivel mounts (U.S. PAT. 6,302,381) use 3-D formed heavy-gauge steel stampings and a proprietary bushing material for a mount with minimal deflection and maximum support. Mounts have multiple mounting positions up to a 3 inch x 5 inch trailer frame. 8 inch diameter wheel, handle and wheel are shipped unassembled.

• Capacity: 1500 pounds
• Travel Distance Length: 10 inch, Retracted Length: 13 inch, Extended Length: 23 inch (measured from center of mounting plate, to bottom of wheel)
• Clearance: 12.4 inch (measured from center of mounting plate to top of jack)
• Z-MAX 600 Zinc finish to resist corrosion
• Limited 5 Year Warranty

User questions & answers

Question:	were are Fulton Product manufactured
Answer:	Thankyou for your inquiry. It's a pleasure to assist you. Fulton is manufactured by Cequent Performance Products. The XP15 jack is made in China.
Question:	what is the measurement of this jack from the bottom of the wheel to the bottom of the trailer when fully retracted
Answer:	Not sure why this is a relevant question as this is a swing-away jack. When you hook up to your tow vehicle just swing it and stow it so it is parallel to the trailer. But having said that an eyeball measurement is close to 11 1/2 inches.
Question:	I currently have a Fulton center bolt that needs replaced is the mounting standard
Answer:	Yes,mine was a center bolt also , this one has brackets that mount to the trailer not a center bolt. I would say this,my handle already broke so I’m in need of a new one, I would spend a little more money to get a better one next time.
Question:	Is this jack or the finish able to withstand salt water
Answer:	Nothing can really withstand salt water completely, but if you spray it down after trailering it should last a long time. Proper maintenance is crucial

Product description

✎ITEM:

BRAND: TYT

TYT Swivel Trailer Jack, Heavy Duty Boat Trailer Jack with Dual Wheels, 12 inch Lift, 1500 lbs



★Information:

Color: Sliver

Capacity: 1500 lbsl

Surface treatment: Zinc Platedl

Material: high steel

Outer tube diameter: 2 inch

Dual Wheels size: 6 inch Maximum lifting height: 12 inch

retracted total height: 25.95-inch

extended total height: 37.95-inch

Gross Weight: 16.5 pound



★Package Content

1 X Double Wheel Jack

1 X Wrench



★WARRANTY★

ONE year warranty

Within Warranty period, if under the usage of instruction sheet, any product broken or damage, we will offer the repair service for free or refund.



★NOTICE

About the size of products, there may be 4-5 mm measured error.



If you receive a broken package, please take pictures and let us know first.We promise to answer you within 24 hours and solve it for you



Please check the size again and again before placing the order, avoid returning.



If you have any suggestion about our pictures or description of the product, please no hesitate to contact us✉, your advice can make TYT better, thank you.

• Swivel Trailer Jack Size: GW: 16.5 lbs; Package size: 24 inch x 7 inch x 7 inch; Dual Sturdy 6 inch Poly Wheel; Outer tube diameter: 2 inch; Maximum lifting height: 12 inch.
• Jack Capacity: Lift capacity: 1500 lbs, comes with bolt-on mounting hardware to readily attach to the trailer tongue.
• Easy Operation: This trailer jack allows for 12 inches of vertical movement and operates using a side-wind handle (25.95-inch retracted total height, 37.95-inch extended total height), it can be adjusted according to apecific operation requirements.
• Heavy Duty Material: Heavy duty steel, provide excellent mounting facility. This boat trailer jack is protected in a durable zinc-plated finish, can long-lasting corrosion resistance against water, dirt, road salt and more.
• Swivel Design: To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.

User questions & answers

Question:	will this hold up my jon boat and roll
Answer:	Yes, works great for me
Question:	Can one install this on a normal travel trailer
Answer:	It depends on the style and size of the trailer. That should work fine, once the trailer is on the ball and you take the weight off of it. It’s only rated for 1500 pounds tongue weight. It does stow well for my boat trailer.

Product description

Fulton TJ1200 Trailer Jack is designed for use with marine and utility trailers. Fulton brand tongue jacks are time-tested and application-proven. Features Z-MAX 600 Superior Plating corrosion protection. Bolt-on, includes all necessary mounting hardware and 3/8" pull pin. Sturdy 6" Poly wheel. The Fulton brand retaining ring swivel mount offers minimal deflection and maximum support. Mount fits up to a 3" x 5" trailer frame. Capacity: 1200 lbs., Travel: 10", Retracted Length: 12.7", Extended Length: 22.7" (Measured Center of Mount to Bottom of Wheel) Top Clearance: 11.4" (Measured Center of Mount to Top of Jack)

• Bolt-On Swivel Tongue Jack, 1200 lbs. capacity
• Sturdy 6" Poly wheel, 3/8" swivel pull pin
• Hardware included to mount up to a 3" x 5" trailer frame
• Z-MAX 600 superior plating corrosion protection
• Limited 5 Year Warranty

User questions & answers

Question:	What is the center to center distance of the horizontal holes on the mounting plate? I need 6" center to center or 5.5" between the inside edges of holes
Answer:	If you go on the website it gives you a template with the dimensions. As it happens, my trailer is two states away at this time and I can't measure for you.
Question:	Is this Jack assembled with the snap ring
Answer:	I suppose so......I've never had the occasion to take it apart.
Question:	How do I warranty it out after 12 months it has completely failed even after filling it with a tube of grease when brand new
Answer:	get in touch with the dealer, or anyone that sells the jack-----by the way, how did it fail??
Question:	Can yon provide a CAD model of this trailer jack
Answer:	No. That is proprietary information.

Product description

Prevent unexpected trailer roll with this ABS plastic wheel stop. Suitable for use with standard 6 inch trailer jack wheels. ABS plastic construction ensures lasting durability. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable.

• ABS plastic wheel stop prevents unexpected trailer roll
• For use with trailer jacks for boats and personal watercrafts
• Size: 6-1/4 inch
• Color: Black
• Durable ABS plastic construction

User questions & answers

Question:	Does this work with Dual wheeled jacks
Answer:	No. It really only fits a single wheel. Double wheel would flatten it.

Product features

The Seachoice Commitment

Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable.

Quality

Seachoice marine accessories and OEM replacement parts are manufactured to rigorous standards to ensure proper function and first-rate appearance.

Selection

From anchors to anodes, Seachoice offers a wide range of products designed to make your experience on the water safer and more enjoyable.

Value

Seachoice is operated by boating, fishing, and water sports enthusiasts like you who appreciate quality and selection at an affordable price.