11 best iron sights ww2

• FAST & EASY SIGHTING - See All Open Sights have a bright Edge-Glow reticle so you get a quick and clear picture in low to full light conditions. The unique design and sighting method makes makes our sights easier to see than traditional iron sights.
• NATURAL SIGHTING - Focus on the target, rather than the front post as traditional iron sights require. With a little practice you'll quickly adjust to the new sighting method and regardless of your angle or eye position you'll hit where you aim!
• EASY INSTALL & NO BATTERIES REQUIRED - Installs in a few minutes and compatible with a single picatinny or weaver rail! All parts needed to mount are included. Stop carrying an extra set of batteries and constantly adjusting your sight. Set it and shoot!
• VIRTUALLY INDESTRUCTIBLE - Built in the USA to be tough as nails and functional in ALL conditions. Get it wet or drop it - our sight will hold zero round after round. No-gap construction means no hazing, fogging or scratching of your optics. Tough sights made for use in the field by rugged individuals.
• MADE IN THE USA with 100% SATISFACTION GUARANTEE - We stand behind our claim that this is the best open sight on the market. We offer a LIFETIME PARTS WARRANTY on our patented sight. We will take it back if you don't love it - no questions asked!

User questions & answers

Question:	Could you please clarify size: tritium-lit vs glow-lit? and what is its over all height in mm
Answer:	Glow sight sits low as a shotgun ghost sight
Question:	will it fit srm 1216 shotgun
Answer:	Nope
Question:	How do you zero this thing
Answer:	There are small allen screws used to adjust for windage and elevation. Allen wrenches are included with the sight.
Question:	Can I mount it on my browning 12 gauge, used for goose hunting
Answer:	You can mount this sight on anything with a MIL-STD-1913 rail, you may need a riser mount depending on the weapon you are mounting it on.

Product features

Easy to See

Our sight is easier to see than a red dot or traditional reflex sight. The bright polycarbonate shows up clearly in low to full light conditions. And the single window design means no fogging or hazing in humid environments.

Our patented zero parallax design enables accurate shooting regardless of your angle or eye position. Simply put the top of the reticle on the target and you'll hit it every time.

If you have vision problems such as astigmatisms or cataracts, this sight is for you. Restore your joy in shooting!

Works in All Weather Conditions

• Wet or dry, hot or cold, our sight works in all weather conditions
• Lightweight and drop-proof
• Holds zero through a wide range of temperature changes

Mounts to a Single Picatinny or Weaver Rail

• Quick detach system with thumb nut release
• Sits .75" above rail when mounted
• Thread on thread positive adjustment

Single Lens Element

• Compatible with night vision
• No fogging or hazing
• Parallax free
• Unlimited eye relief
• What you see is what you hit!

No Batteries Required

• Purely mechanical design increases reliability in the field
• No external dependencies
• Riser mount NOT included

Product description

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the .223 platform. Impact resistant polymer construction provides light weight and resists operational abuse. Spring-loaded flip up sight easily activated from either side or by pressing the top. Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard irons. Protective wings shield the spring-locking front sight post. Elevation adjustment tool included, but most aftermarket front sight adjustment tools may be used as well. NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards. MAG248-OD: The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the .223 platform. Impact resistant polymer construction provides light weight and resists operational abuse. Spring-loaded flip up sight easily activated from either side or by pressing the top. Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard irons. Protective wings shield the dual, same plane flip apertures. Sight can still be folded with either large or small aperture in position. Detent knob easily and positively adjusts windage.

• Olive Drab Green Color
• Front and Rear Sights Included
• Made in USA

User questions & answers

Question:	Do they say "gen 2" on them? how can you tell from other mbus sights
Answer:	hello and thanks for writing Rock Mountain Tactical. There are only GEN2 since about 2010. The previous version were GEN1 and are larger than these. Ours are authentic Magpul. There are PTS versions out there and are usually way cheaper. PTS are copies for airsoft. These are not PTS. Thanks for looking. V/R, Rock Mountain Tactical
Question:	Will these sites lineup with optics like the spark
Answer:	yes, I have them on all my rifles along with VTM sights and leepers
Question:	This is for the seller - do you have a set like this in black
Answer:	yes, but not currently listed on amazon.
Question:	Will Magpul mbus sights fit an M&P 15 sport
Answer:	Yes as long as it has standard picatinny rail.

Product description

⭐️ NEW HARDENED AIRCRAFT GRADE ALUMINUM ALLOY!



✔ THE QUALITY



The Tacticon Flip-Up Front And Rear Iron Sights are a high-quality aluminum alloy. Whether using as your main sight or as a back-up sight for another optic, you can count on the accuracy and durability this sight offers. The spring loaded pop-up action on the iron sights is incredibly fast and effective with the simple push of the button.





✔ THE WARRANTY



These iron sights are fully refundable if you are not satisfied with them. We offer a lifetime warranty on the sights.





✔ THE FLEXIBILITY



It is designed for any hunting or tactical rifle including Winchester, Remington, Colt, etc. and can fit ANY rifle and will fit all Picatinny Rail and Weaver Rail sections.





✔ THE ADJUSTABILITY



The front sight post is fully adjustable for elevation and we INCLUDED the front sight post adjustment tool for your convenience! The rear sight is fully adjustable for windage.





✔ THE INSTALLATION



Allen wrench to easily mount the iron sights is included with this product unlike most other sights on Amazon. How terrible would it be to get these awesome iron sights then have to drive to the hardware just to mount them on your rifle?





✔ THE PACKAGING



Whether you're keeping this for yourself or giving this to someone for an awesome gift you will be pleasantly surprised when you crack open the packaging. Makes for an awesome gift box and/or ammo box!!!

• ✔ FRONT SIGHT ADJUSTMENT TOOL INCLUDED! This front sight elevation tool is included! It sells for $10 by itself on Amazon!
• ✔ TACTICON IS A COMBAT VETERAN OWNED COMPANY - STURDIEST AND BEST BUILT IRON SIGHT ON AMAZON - Made out of actual metal (hardened aircraft grade aluminum alloy), not polymer like some of these cheap imitations on Amazon
• ✔ COMES WITH WOODEN CASE AND FRONT SIGHT ADJUSTMENT TOOL - Keep the sight adjustment tool and the mounting wrench along with some extra ammunition in this awesome box we include with your purchase.
• ✔ PUSH BUTTON FLIP UP WITH EASE - Simply the press of a button and your iron sights will pop up quickly.
• ✔ MOUNTING WRENCH INCLUDED - No other iron sights on Amazon come with the allen wrench and the front sight adjustment tool!

User questions & answers

Question:	The push button has a knob. What does it do
Answer:	I have been trying to get my rear sight warrantied for months and only get a completely useless e-mail response in return. Good luck. If you get anywhere with your warranty, please let me know how you did it.
Question:	Who do you call for the life time warranty
Answer:	A customer can have it in any color they want as long as it's black
Question:	Does this come in tan
Answer:	The are DEFINITELY made in China. The box is marked "Made in China".
Question:	Where are they made
Answer:	I think everything is made in China. It’s a good sight for the money . I like mine

Product description

Technical Data:

• Extremely light and durable aluminum 

• Visible Front Red Dot Sight and Rear Green Dot Sight 

• Flip-up design with spring load push button, allowing for quick deployment 

• Low profile sights with 45 degree orientation, no interference with optics / laser sight 

• Rear sight Windage adjustable,Front sight elevation adjustable

What you will get?

Package content:   

1 X Front iron sight 

1 X Rear iron sight 

1 X Hexagon wrench

 

100% Life time Guaranteed: If there have any problems , please contact us and you will get the full refund or a new product.

• Machined from extremely light and durable aluminum,Non-rust black anodized finish.
• With Visible Front Red Dot Sight and Rear Green Dot Sight provide the brightest aiming points in low-light conditions.
• Both left-handers and right-handers could use it freely and easily. 45 Degree Sights with Low-Profile Design makes transitioning from optical to iron sights simply.
• Spring load push button with flip-up design, allowing for quick deployment and adjust the deployment according to your needs.
• Compatible with most Picatinny/Weaver rails.

Product description

X-Sight 4K PRO is the newest breakthrough from the company that brought you the Digital Hunting experience. The X-Sight seamlessly blends in the latest technology with the more traditional scope form to bring you one of the best from both worlds. Powered by a Dual Core processor with a low light 4K sensor the X-Sight 4K PRO offers unprecedented image performance with the latest Smart features that one has come to expect from an ATN scope.

• Obsidian IV Dual Core Processor and Ultra HD Sensor - an ideal combination to satisfy your 24/7 hunting needs. Rich color palette for the daylight, sharp black-and-white image at night
• Dual Stream Video Recording - Wifi Streaming and Video Recording now can be turned on simultaneously with no negative effect on performance
• Ballistic Calculator feature makes every shot a kill. Point of impact is adjusted automatically with consideration of ammo type, range to target and environmental data
• Recoil Activated Video - focus on the game, let X-Sight handle the routine tasks. As the scope senses the recoil, video is automatically stored on the SD card
• Ultra Low Power Consumption - over 18 hours of active use. No more lost opportunities due to drained batteries

User questions & answers

Question:	Lol! these were under $600 at one time! why are they so much now
Answer:	Inflation
Question:	Does this come with the accessories such as: eyecup, sunshade, standard rings(2pcs), infra-red illuminator, cantilever ring w/ picatinny rail, usb cab
Answer:	Comes with every thing you said but base for mounts
Question:	What type of charger does the scope take
Answer:	Old android phone charger could work but don’t recommend
Question:	Bought the scope, now how do I get my free remote
Answer:	http://www.rapid-rebates.com/AtnHolidayRebate use this link and follow instructions and you will receive your remote

Product description

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. It is constructed of tough, impact resistant polymer to provide light weight and resistance to operational abuse.

User questions & answers

Question:	Are these metal or polymer
Answer:	Polymer with metal frame
Question:	Do they come with the tool to adjust the front sight
Answer:	Yes these come with the front sight adjustment tool.
Question:	Do they come with the tool
Answer:	Yes these come with the front sight adjustment tool.
Question:	What is Gen2 color for FDE? How do I know if the colors will match my Magpul stock
Answer:	If you received your stock after 2012 it will match if it is pre 22012 the stock will be lighter in color I hope this helps happy shooting :)

• Tool Free Windage Adjustment with Dual Aiming Apertures
• Precision Machined from Matte Black Anodized Aircraft Aluminum
• Posi-lock Retention Design Prevents Sight Tower From Collapsing when in Use
• Designed to match UTG Super Slim Flip-up Front Sight, MNT-755

User questions & answers

Question:	How much does it weigh
Answer:	Just got mine in the mail, and this is incorrect. I put it on my calibrated scale, and it weighs 1.54 oz. 0.3 is impossibly too light.
Question:	Can someone explain to me how iam going to be on target with out an elevation adjustment
Answer:	As we say back in the Marines, adapt and overcome! And you can use the front site post to adjust your elevation with half turn or fool turn at a time until you reach your target at 100,200,300 yards and so on. And write it down so that you can have it on hand for future reference. I hope this answers your question. Semper Fi
Question:	Have to try this again, what is the height of the peep hole from the top of the rail
Answer:	The sight measures 1 3/8" from top rail to peep hole. Works fine with standard M4 sight post. all metal construction. nice sight for the money.
Question:	What is the height of the peep hole for the rear sight from the top of the rail
Answer:	Not sure, but I've used it with an F marked fixed front sight if that's why you're asking.

Product features

Backup When You Need It

The UTG low profile flip-up sight coexists along the same plane as a long gun’s primary optic. Although more than capable of performing on its own along with its matching low profile front sight, many will equip the two just in the event their primary optic sees a failure. Take it as a form of insurance and that it would be better to have it and not need it, than need it and not have it. Keep the two flipped down and stowed away under your primary optic. If Murphy’s Law finds its way to you, take comfort knowing the two can be readied and depended on within seconds

Unobtrusively Low Profile and Quick to Deploy

Equipping the sights simply requires them to be pushed upward by the hand. The Posi-lock plunger will then activate, locking the sight tower in the upward position when deployed and preventing any accidental folding of the sights while in use. This is especially important when using the sights in tandem with other gear such as a sling or in atmosphere where equipment can easily be snagged on something. Thanks to their low profile shape and minimized 3mm locking bolt mounting deck, when stowed away, the two sights sit extremely low and are unobtrusive to optics and or accessories.

A Pair To Be Had

One can expect the following when purchasing the front and rear as a pair. MNT-955, The rear sight, is equipped with both a large and small aiming aperture and is windage adjustable via an easy-to-use, tool-free, and tactile thumb wheel. MNT-755, The front sight, is equipped with a standard AR15 front sight post that can be adjusted via a 4 prong sight adjustment tool or the tip of a cartridge and can easily be switched out with one of the many aftermarket standard front sight posts currently out in the market. Both mount securely to a MIL-STD-1913 Picatinny rail. This makes them a great choice not just for MSRs, but other platforms that have a straight sight line configuration and are equipped with a 12 O'clock Picatinny Rail.

• Tubeless design with 42mm reflex lens aperture provides quick target acquisition, also a wider field of view to maintain situational awarenes.
• 4 Selectable reticles and 5 brightness settings. Low power consumption for long battery life.
• Integrated mount for standard 20mm Picatinny or Weaver rails which will not loose, made to last.
• Parallax corrected & unlimited eye-relief. Fully adjustable height, brightness, windage and elevation. Where the dot goes, so does the bullet!
• Made of high grade aluminum alloy which makes the red dot sight durable and light weight.

User questions & answers

Question:	Anyone use this on a Remington
Answer:	Not sure if it is stout enough for a shotgun
Question:	Do you have any type of warranty on the product
Answer:	1-year money back. 5 years warranty.
Question:	Will this mount on marlin 1894 44 mag
Answer:	Sure it works if you install a picatinny rail system on your rifle.
Question:	Has anyone used this on a shotgun
Answer:	I installed it on a Panzer Arms BP-12 . Co witnessed with the front sight and fired 30 high powered shells with no issue.

Product features

Features

• Tubeless design with 40mm reflex lens aperture provides a wide field of view, suitable for normal and rapid-firing shooting of moving targets.
• Durable all metal construction
• Low power consumption for long battery life
• Windage and elevation adjustable (tools included)
• Adjustable reticle brightness, height
• Lightweight and shockproof
• Integrated mount for standard 20mm Picatinny or Weaver rails

4 Pattern Reticles Switch

• Provides 4 different pattern reticles to meet various needs.

Wide View

• 40mm reflex lens provides quick target acquisition，also a wider field of view to maintain situational awareness.

Updated Press Button

• Each press to turn on or change the brightness and hold the press to turn off

Please Read

Based on customer'feedback and other sources, an astigmatism (uncorrected or with prescription) may cause blurry reticles on red dots (Double images) and other prismatic optics. If there is an issue with the reticle and you think this may apply to you, please consult a professional for more information on astigmatism and prismatic optics.

This reflex sight is assembled manually, so 0.1% of them may not 100% perfect when first time use. It would be highly appreciated if you could send us a message if there is any problem with this sight. (Lens cracked, Can't hold zero etc.)

We will provide best solution for you.

Inside the Box

1 x RS-30 Reflex Sight

3 x LR44 (AG13) Batteries

2 x Allen Wrench

1 x Len Cleaning Cloth

• All steel construction; Steel, rectangular sight post selectable between Match and Standard widths (.040” Match width for increased precision; .060” Standard width for maximum visibility)
• Case hardened and finished with Melonite QPQ for extreme resistance to wear and corrosion
• Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail
• Elevation adjustment knob – no tools required
• Positive detents in both the up and down positions as well as on the elevation knob; Standard sight height when deployed

User questions & answers

Question:	Do you get solid "clicks" when you adjust the elevation dial? If so, anyone know how many Clicks per MOA
Answer:
Question:	can someone explain "co-witness" . Got a Colt ar15 and want to put a red dot on it. Everybody seems to talk about co witness?? help
Answer:
Question:	Will this work on the gas blocks that are lower than the rail on the upper reciever
Answer:
Question:	Does this sit at the same hight as a fixed front sight
Answer:

Product description

Impact resistant polymer construction provides light weight and resists operational abuse

Spring-loaded flip up sight easily activated from either side or by pressing the top

Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.

Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons

Protective wings shield the dual, same plane flip apertures & spring-locking A2 front sight post

Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well

Detent knob easily and positively adjusts windage



MBUS - Front Gen 2

Weight, w/ hardware: 1.2 oz.

Height above rail, stowed: ~0.51 in.

Length, stowed: 2.6 in.

Length, deployed: 1.5 in.



NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.



MBUS - Rear Gen 2

Weight, w/ hardware: 1.3 oz.

Height above rail, stowed: ~0.51 in.

Center of aperture to top of rail: 1.42 in.

Length, stowed: 2.6 in.

Length, deployed: 1.5 in.

• Impact resistant polymer construction provides light weight and resists operational abuse
• Spring-loaded flip up sight easily activated from either side or by pressing the top
• Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
• Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons
• Protective wings shield the dual, same plane flip apertures & spring-locking A2 front sight post

• Reticle allows for 4 different styles. Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot combinations. All in one sight!
• A 33mm lens provides quick target acquisition. Wide field of view to maintain situational awareness.
• Very sturdy and secure rail mounting system. Will not come loose, made to last.
• Parallax corrected & unlimited eye-relief, where the dot goes, so does the bullet!
• Ultralight, waterproof and shockproof - Powered one 3V lithium battery (included).

User questions & answers

Question:	What length pic rail is required? 5 slot or 7 slot
Answer:	Hello, I am a nerf gun modder (somewhat) and yes, you can use this on a nerf gun, however, you need a picatinny rail to use the sight. This is a link to the Worker Picatinny Rail for the Retaliator. https://www.amazon.com/Worker-Picatinny-Weaver-N-Strike-Retaliator/dp/B019B63KJ6/ref=sr_1_6?s=toys-and-games&ie=UTF8&qid=1522598908&sr=1-6&keywords=worker+picatinny+rail+nerf
Question:	How does this sight power on
Answer:	Hey Kevin ... I don't think you want to put this red dot sight on your glock because it would be just too big and too heavy for a pistol. I would not recommend it. Hope this would help you out.
Question:	Is it a nerf gun sight
Answer:	The right side
Question:	Can be installed on the glock pistol
Answer:	According to the Sig Manual it states that it has 8 daytime and 2 NV (night vision) settings. So in theory it should. I, however have not tried it, since I do not own any infrared equip. lights etc.

Product features

Feyachi RS-28 4 in 1 Reflex Sight

A 33mm sighting system allows for fast target acquisition, and the open design allows the shooter to stay aware of the surroundings. Creates wide field of view, designed for target shooting and hunting. The dot system is adjustable for red or green and any one of four different styles of reticle. Like getting 4 different sights in one! Lightweight, yet tough and with the rail attachment system it securely mounts to your rifle or shotgun and will last.

Zeroing:

Select the reticle you desire by turning the reticle selector knob and set your intensity at the best position. With the sight mounted, rest the gun on a solid support and aim at a target 50 to 100 yards away. Test shots should be done in the same conditions to achieve maximum accuracy for adjustment, for which the use of firm rest for firing and same type cartridge is recommendable. Each click adjustment moves the point of impact by 1 MOA (approximately 1"± at 100 yds, 1/2"± at 50 yards)

Features

• Dual Illuminated
• 4 Reticle Patterns
• 5 Brightness Settings
• 33mm Wide Field of View
• Parallax Corrected & Unlimited Eye-relief

Notice

This reflex sight is assembled manually, so 0.1% of them may not 100% perfect when first time use. It would be highly appreciated if you could send us a message if there is any problem with this sight. (Lens cracked, Can't hold zero etc.)

We will provide best solution for you.

4 Reticle Patterns

• Starburst
• Cross
• Bulleye
• Dot

Dual Illuminated

• Red & Green
• 5 Brightness Settings （"R" & "G" are "off " mode）

Specification

• Magnification: 1x
• Objective aperture: 33mm
• Field of View: 15.8@ 100m
• Windage/Elevation Click Value : 1 MOA per Click
• Adj. Range: +/- 30 MOA
• Eye Relief: Unlimited
• Length: 82mm
• Battery: 1xCR2032
• Weight: 4 oz
• Size: 3.2*1.5*2.1

Inside the Box

• 1 x 4 Reticles Reflex Sight
• 1 x Rubber lens Cap Cover
• 1 x Cleaning Cloth
• 1 x CR 2032 Battery
• 2 x Wrenches

NOTICE

Feedback from some customers states that the sights are blurry or it shows double images.Please don't worry,It just need 3-5 minutes to preheat when you first time to use it.(Just turn on and let it stay for 3-5 minutes).Then it will show clearly.

If it still results the same, please do not hesitate to let us know before you low rating, we will try our best to help you out.