12 best airsoft scopes

• Specification: 3-9x40
• Magnification: 3-9x
• Objective Diameter: 1.57
• Exit pupil: 0.2
• Length: 12.20

User questions & answers

Question:	Is it good for a airsoft sniper
Answer:	It might work if it doesn't you can always return it
Question:	Will this scope work for .22air rife
Answer:	I put mine on a .177 nitro piston air rifle shooting 1200fps and it has been a perfect match for eliminating garden pests from 15 to 40 yards. Make sure you purchase dovetail scope rings that are high enough to provide clearance for your particular rifle, (medium profile minimum).
Question:	would this scope be ok for a .22 rifle
Answer:	You betcha. I have one on a Ruger 10 22 LR rifle and it works wonders. Took me about 20 to 30 minutes to get the scope 0 did good, but it is a nice asset to my rifle. I would recommend it. Hope this helps.
Question:	is it sock resistant
Answer:	Unfortunately, it is not sock resistant. As a matter of fact, socks will actually dissolve the scope. You've been warned. Oh, and dont feed it after midnight, OR get it wet..

Product features

SHARP, CLEAR, BRIGHT - CVLIFE SCOPE

CVLIFE has scopes that can perform in any condition and environment. CVLIFE'S Fully-Multi coated lenses can deliver an amazing 95 percent light transmission across 300 percent more of the visual light spectrum for a high-contrast and color accurate picture, ensuring that the picture stays visible by keeping fog, rain and dirt off the lenses so you never miss a moment.

Use Friendly 3-9X Power Ring

Precise Elevation & Windage Adjustment Turrets

20mm (0.79 Inches) Picatinny Mount

CVLIFE 3-9x40 R4 Reticle Crosshair Scope with Free Mounts

Specification of the Scope

• Magnification: 3-9x
• Objective Diameter: 1.57" (40mm)
• Exit pupil: 0.2"-0.67" (5.1mm-16.9mm)
• Length: 12.20"(31cm)
• Weight: 0.76lb.(345g)
• Tube diameter: 1" (25.4mm)
• Free Offer Rail Mounts: 0.79"(20mm)
• Field of View: 25'-14'@100yards
• Mount ring dia. 1" (25.4mm)
• Click Value: 1/4inch@100 yds

Special Inner and Outer Structure

• The scope includes a Special inner and outer structure to control the interaction between the inner and outer tubes of the scope, which provides long lasting reliability in these interaction and ensures the reticle would not rotate when adjusting. This smart design makes the scope shockproof and provides more precise windage and elevation adjustment.
• Built on an ultra strong 1 inch machined-aluminum tube. Completely sealed and 100% nitrogen filled makes it fog and rain proof. This scope could be used under any weather condition.

• Reticle allows for 4 different styles. Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot combinations. All in one sight!
• A 33mm lens provides quick target acquisition. Wide field of view to maintain situational awareness.
• Very sturdy and secure rail mounting system. Will not come loose, made to last.
• Parallax corrected & unlimited eye-relief, where the dot goes, so does the bullet!
• Ultralight, waterproof and shockproof - Powered one 3V lithium battery (included).

User questions & answers

Question:	What length pic rail is required? 5 slot or 7 slot
Answer:	Hello, I am a nerf gun modder (somewhat) and yes, you can use this on a nerf gun, however, you need a picatinny rail to use the sight. This is a link to the Worker Picatinny Rail for the Retaliator. https://www.amazon.com/Worker-Picatinny-Weaver-N-Strike-Retaliator/dp/B019B63KJ6/ref=sr_1_6?s=toys-and-games&ie=UTF8&qid=1522598908&sr=1-6&keywords=worker+picatinny+rail+nerf
Question:	How does this sight power on
Answer:	Hey Kevin ... I don't think you want to put this red dot sight on your glock because it would be just too big and too heavy for a pistol. I would not recommend it. Hope this would help you out.
Question:	Is it a nerf gun sight
Answer:	The right side
Question:	Can be installed on the glock pistol
Answer:	According to the Sig Manual it states that it has 8 daytime and 2 NV (night vision) settings. So in theory it should. I, however have not tried it, since I do not own any infrared equip. lights etc.

Product features

Feyachi RS-28 4 in 1 Reflex Sight

A 33mm sighting system allows for fast target acquisition, and the open design allows the shooter to stay aware of the surroundings. Creates wide field of view, designed for target shooting and hunting. The dot system is adjustable for red or green and any one of four different styles of reticle. Like getting 4 different sights in one! Lightweight, yet tough and with the rail attachment system it securely mounts to your rifle or shotgun and will last.

Zeroing:

Select the reticle you desire by turning the reticle selector knob and set your intensity at the best position. With the sight mounted, rest the gun on a solid support and aim at a target 50 to 100 yards away. Test shots should be done in the same conditions to achieve maximum accuracy for adjustment, for which the use of firm rest for firing and same type cartridge is recommendable. Each click adjustment moves the point of impact by 1 MOA (approximately 1"± at 100 yds, 1/2"± at 50 yards)

Features

• Dual Illuminated
• 4 Reticle Patterns
• 5 Brightness Settings
• 33mm Wide Field of View
• Parallax Corrected & Unlimited Eye-relief

Notice

This reflex sight is assembled manually, so 0.1% of them may not 100% perfect when first time use. It would be highly appreciated if you could send us a message if there is any problem with this sight. (Lens cracked, Can't hold zero etc.)

We will provide best solution for you.

4 Reticle Patterns

• Starburst
• Cross
• Bulleye
• Dot

Dual Illuminated

• Red & Green
• 5 Brightness Settings （"R" & "G" are "off " mode）

Specification

• Magnification: 1x
• Objective aperture: 33mm
• Field of View: 15.8@ 100m
• Windage/Elevation Click Value : 1 MOA per Click
• Adj. Range: +/- 30 MOA
• Eye Relief: Unlimited
• Length: 82mm
• Battery: 1xCR2032
• Weight: 4 oz
• Size: 3.2*1.5*2.1

Inside the Box

• 1 x 4 Reticles Reflex Sight
• 1 x Rubber lens Cap Cover
• 1 x Cleaning Cloth
• 1 x CR 2032 Battery
• 2 x Wrenches

NOTICE

Feedback from some customers states that the sights are blurry or it shows double images.Please don't worry,It just need 3-5 minutes to preheat when you first time to use it.(Just turn on and let it stay for 3-5 minutes).Then it will show clearly.

If it still results the same, please do not hesitate to let us know before you low rating, we will try our best to help you out.

• Solid metal construction, durable and shock proof.
• Red or green dual illuminated dot reticles with 5 level brightness control.
• Multi-coated lens, water proof & fog proof, works great in all weather conditions.
• Precision windage and elevation adjustments, features high/low profile quick release mount.
• Fits standard 20mm Picatinny or Weaver rails.

User questions & answers

Question:	will this work on a Mossberg without buying rails? the description says it comes with rails but one post said they ordered it separately
Answer:	Hi, the dot sight can fit on all 20-22mm Weaver or Picatinny rails.
Question:	Will this work on my judge revolver
Answer:	I have never seen the Taurus Judge, but being a smaller revolver, my best guess is no.
Question:	Does it have magnification or just a red dot
Answer:	It is just a red dot.
Question:	How much of the target does it cover at 50 yards
Answer:	It claims to be a 4 MOA dot. 4MOA means 4 minute of angle. Each MOA is very close to being 1" at 100yds. Meaning this dot would cover 4"of the target at 100yds, 2" at 50yds, 1" at 25 yds, 8" at 200yds and so on.

Product features

Specifications

• Reticle Type: 4 MOA Illuminated Red and Green Dot
• Illumination Settings: 5
• Objective Lens Dia.: 1.6″ (40 mm)
• Magnification: 1×
• Fitment: All Standard 0.8″ (20mm) Weaver & Picatinny Rails
• Body Material: Aircraft-Grade Aluminum Alloy

Reflex Dot Sight

With our dual-color reflex sight, you can fully enjoy shooting in daylight with the conspicuous green dot but be ready for the night with the distinct red dot.

High-Quality Lens

This 1.6″ (40mm) objective dia. lens allows you to have a clear field of view as wide as 57′ at 100 yards.

Outstanding Versatility

This red/green reflex sight is perfectly compatible with and easy to install on all 0.8″ (20mm) Weaver and Picatinny rails.

Precise Windage & Elevation Adjustments

Quickly and easily zero in on your target with the elevation and windage dials. Pull the trigger with confidence that your aim is true.

• FIELD OF VIEW: Magnification 2.5-10X with 40mm objective, field Of View: 100 yards of 32.5' @ 2.5x - 8.9' @10x, laser range up to 100 yards.
• MULTI-COATED GREEN OBJECTIVE LENS, boast higher light transmittance for better clarity performance compared to blue objective lens.
• RED AND GREEN ILLUMINATED RETICLE, 5 brightness levels for all environments.
• A QUALITY COMPLET SET OF LASER SCOPE, Solid aluminum alloy construction, quick and secure attachment to all Picatinny or Weaver rails.
• WATERPROOF, FOG PROOF PERFORMANCE, Nitrogen filled and O-ring sealed for waterproof, fog proof performance.

User questions & answers

Question:	I can’t get the cross hair cap off. Is there a trick? Seems like it should just come off
Answer:	it slides on and off pull up..
Question:	Does it work at night
Answer:	The laser is visible at night and the recticle is illuminated, however it does not illuminate the target. If you can't see it with your naked eyes you won't see it through this scope. Works great in combination with a flashlight though.
Question:	can i use it for airsoft and is it good
Answer:	Not sure on airlift. I use on virgins. This one I use onpcp .22 _ scope with loader are good at 26yards and 61yards. I really don't like the dot pigments, they not as pronounced.
Question:	Will this fit my s&w m&p15-22 without removing the stock flip up sights
Answer:	Yes, I have this scope on my M&P15 and did not have to remove flip up rear sight.

• 3-4 MOA, 11 BRIGHTNESS SETTINGs, MULTI-COATED AMBER LENS WITH 1” RISER: 3-4 MOA red dot sight allows for accurate, both-eyes-open shooting. 11 red dot brightness settings provide optimal visibility in any light conditions. Multi-coated, scratch resistant amber lens provides enhanced image clarity. 1’’ riser mount brings 1/3 lower co-witness for more open view.
• WATERPROOF, SHOCKPROOF, SCRATCH RESISTANT AND STEALTHY: Fully waterproof with sealed housing. Shockproof circuitry resists damage from rough handling. Matte black anodized finish resists scratches while keeping a stealthy profile.
• PARALLAX FREE: With the parallax-free design, the reflex sight scope follows the movement of the users' eye while remaining fixed on the target, eliminating any need for centering.
• LIGHTWEIGHT DESIGN: Weighing merely 120 grams, the red dot sight allows easy operation and convenient transport.
• 50,000 HOURS OF BATTERY LIFE: Genuine CR2032 Lithium battery (INCLUDED) stands up to 50,000 hours at the lowest brightness setting; Laser class II, Laser power less than 5mW.

User questions & answers

Question:	Can it hold up too a 44mag? Handgun
Answer:	Nope. These are good for non recoil style “replicas” Also this is a HUGE Red dot for a handgun lol.
Question:	Do you think the lens will get shot out by a airsoft gun or paintball gun
Answer:	Look at the price.....what are you expecting for a 25 dollar sight?
Question:	Will it fit on a weaver rail
Answer:	The Dot Sight fits all 20-22mm standard weaver and picatinny rails.
Question:	Can this fit my pistol grip shot gun
Answer:	If you have a scope mount base on your shotgun, then yes it should fit. It is a great red Dot.

Product features

Pinty Tactical 3-4 MOA Red Dot Sight

• Magnification: 1x
• Objective Lens Dia: 20mm
• Length: 2.7in
• Reticle: 3-4 MOA
• Field of View @ 100 yards: 10.7
• Parallax Free@20 yards:20
• Eye Relief: Unlimited
• Exit Pupil: 22mm
• Windage/Elevation Click Value: 1 MOA per click
• Adj. Range: +/- 35 MOA

Parallax Free

You can easily set your red dot sight to hold zero for precise aiming without the need for manual centering.

Optimal Visibility

This compact red dot sight provides 11 variable illumination settings for optimal visibility in all lighting conditions.

Enhanced Image Clarity

With multiple anti-scratch coatings, this amber lens makes sure your targets are always clear and distinct.

1 Inch Riser Mount

Your lightweight red dot sight comes with a 1″ riser mount, allowing you to see over the fixed sight.

• Magnification: 2.5-10X with 40mm objective; Field of View:100 yards of 32.5' @ 2.5x - 8.9' @10x; Laser: 2mW, Class IIIA, reaching 100 yards
• Clearer Image: multi-coated green lens boast much higher light transmittance compared with blue lens
• Illumination Modes: red & green (5 intensity)
• Durable: made of high strength aircraft aluminum
• If you want to install in any 3/8" Dovetail / 11mm Dovetail Rail, Please Search and Buy " CVLIFE 11mm Mount "

User questions & answers

Question:	Will this scope handle the recoil of a .308 AR
Answer:	The eye relief of this scope is only about 2.5" which is fine for low recoil guns like the AR but may not be enough for the recoil of a .308.
Question:	Will this fit on a smith and wesson ar-15? caliber is
Answer:	Very nice have two and both on AR 15
Question:	Can it mounted on a picatinny? See that the 1 star customers complained about this when it says weaver dovetail rail only
Answer:	It works great on my AR mounted on the picatinny rail.
Question:	Ok i have a sks and i dont want to buy the back with intigrated rail can i mount this in the middle of my gun and still see threw the sight
Answer:	You can mount it where the rear sight is.that part is about 80.00 bucks.but you will not be able to see through it...it is a regular scope that looks cool.your eye will need to be about 3" away to see through it.

• Magnification:4x;Objective Diameter: 1.26" (32mm); Eye Relief: 3.3" (83.82mm) Length: 7.48"(190mm);
• With the fully coated optical glass, the rifle scope would give you a bright and high-contrast image.
• Made of high-strength aluminum alloy and with its one-piece tube construction, the scope is definitely for greater strength and durability.
• Inert gas purged, fog,shock, water proof, this scope can be used under any weather condition.
• The length of the whole scope is 7.48" (190mm), which makes this compact scope suitable for quick moving and aiming.

User questions & answers

Question:	Can this can this be used with gamo shadow whisper
Answer:	don't know, but did fit on my Mossberg plinkster 702
Question:	Can I use this on my 3030 Winchester rifle
Answer:	It will work on any rifle if you buy the correct mounting system.
Question:	is this a standard 1 inch tube
Answer:	My son owns a Remington 22 Lr and it fits it. I have not tried it on anything else. Sorry
Question:	wood this work on a crosman 760 pumpmaster
Answer:	If your scope is blurry it's either defective or you've had too much to drink. ;-)). I would return the scope. I have three of them and they are all clear.

Product features

CVLIFE 4x32 Crosshair Compact Hunting Rifle Scope

Specifications:

• Magnification:4X
• Objective Diameter:32mm
• Field View: 23
• Exit Pupil Diameter: 7.9mm
• Eye Relief: 4.13" (105mm)
• Click Value: 1/4MOA
• Length: 7.48"(190mm)

Featrue:

• Made of high quality aluminum alloy and constructed with the ultra strong one-piece tube, this scope is durable.
• The length of the scope is only 7.48"(190mm). This compact scope is suitable for quick moving and aiming
• The ocular is built with dioptric adjustment lens that can provides nearsighted and farsighted users a clear viewfinder image without the use of eyeglasses.
• Scratch-resistant coating protects exterior lenses from scratches, oil and dirt..

Package Included:

• 1 x 4*32mm Rifle Scope
• 1 x Lens Cover
• 2 x Scope Mount for 20mm Weaver Dovetail Rail Only
• 1 x Allen key

• Wide field of view: Red dot scopes with 30mm reflex lens aperture provides a wide field of view of 19m at 100m,suitable for rapid shooting of moving or normal targets.
• Unlimited eye-relief:Tailor airsoft optics brightness to your environment with 3 levels. Reflex sight with red green blue reticles offer unlimited eye-relief and corrected parallax.
• Clear image: Clarity, Clear and Sharp 5.0 MOA Dot allows for accurate. Airsoft scope with multi-coated, scratch resistant sight scope lens provides enhanced image clarity.
• Easy to use: Red dot scope has 11mm and 20mm (3/8" & 5/8") detachable weaver or picatinny rail mount .Two modes to attach and precision windage and elevation adjustments feature quick release mount.No need to rezero when remounting the dismounted sight.
• Durability and Solid Construction: It’s made of Aluminum Alloy, airsoft sights is durable and lightweight,waterproof and shockproof. Low power consumption for long battery life. Rubber dust cover offer better protection.

User questions & answers

Question:	When will you get the red green and blue scope back on the Amazon catalog? I bought the other and it’s working so well I want tri color scope
Answer:	I just received the 0.8" height rings and mounted a Vortex 4-12x44 Copperhead scope on a Picatinny rail equipped bolt action. The fit was perfect.
Question:	I need a sight for my Browning 1911 22 pistol.Any suggestions? Jon
Answer:	no they will not. they only mount to a picatinny rail mount or weaver style mounts. these are too wide for dovetail .
Question:	How do i turn it on
Answer:	If the diameter of your scope is one inch you can use the one inch diameter rings. Now what you have got to deal with is the height of the rings which will probably have to be a "high" ring to use with a 50MM objective lens. Medium rings might give you clearance between the scope objective end and the barrel but I doubt it. If you are mounting it on an AR platform it would probably work. Ya just have to try different combinations sometimes to get the right fit for you!
Question:	How does the mount convert from 20mm to 11mm
Answer:	While the rings did not give recommended torque specs my scope recommended no tighter than 15 inch pounds

Product features

ESSLNB Upgraded Red,Green & Blue Dot Reflex Sight Scope

1x30mm Red / Green/Blue Dot Sight fast target acquisition, pinpoint accuracy and a wide field of view.

Anti-reflective coating, unlimited eye relief and multi-coated optics create a sight with optimum performance at an affordable offer.

Red ,Green and Blue Dot Reticle

• Red,green and blue illuminated dot reticles with 3 level brightness control

Multi-coated Optics

• Anti-reflective coating, unlimited eye relief and multi-coated optics create a sight with optimum performance at an affordable offer.

3/8" & 5/8" Rail Mount

• It has 11mm and 20mm (3/8" & 5/8") detachable weaver or picatinny rail mount

Elevation & Windage Adjustment

• Elevation & Windage adjust knob design makes adjustment more easier.

Shockproof ,Waterproof and Fog-proof

• It is sealed with O-rings to prevent moisture or dust from getting inside and fogging inside the glass optic.
• Our airsoft red dot is made of high grade Aluminum Alloy,the durable reflex sights is waterproof and shockproof.

Battery Compartment

• Rotate the battery cover and intall CR2032 battery.
• Low power consumption for long battery life

What's in the box?

• 1x Red,Green,Blue Dot Sight
• 1x Allen Wench
• 1x Lens cover
• 1x 3/8" Rail Mount
• 1x CR2032 Battery
• 1x Cleaning Cloth

• 3/8" dovetail mount
• 3-volt lithium battery included
• With the flip of a switch, this light puts you on target quickly
• Easy and fun to use . Dresses up any firearm
• Daisy quality and reliablility

User questions & answers

Question:	will it work on crossman P10 bb pistol
Answer:	No, you need m-lok specific scope mounts or adapter plates.
Question:	Is it reliable for small game hunt
Answer:	as long as it has a standard rail, the biggest question would be if you have the right for your scope, cant complain about the quality tightened up nice and seemed as sturdy as you would expect a simple scope mount to be
Question:	will it work on a daisy powerline
Answer:	Yes they should work, just be careful not to overtighten the top ring screws. 30mm = 1.181 inches
Question:	Whst is the moa
Answer:	Yes, LONSEL 1" Scope Rings fIt well standard picatinny rails. Thanks.

• Magnification power: 4x ,Objective lens: 32mm, Field of view(feet/100 yards): 36.6, Length(inches): 5.5
• High performance optical scope with fiber optic sight for quick and accurate acquisition (with Weaver Slots)
• Crisp image for accurate focus. With the green multi-layer coated lenses, the tactical compact scope can focus target fast and precisely with high light transmission and resolution
• Glass etched reticle with tri-illuminations (green/red/ blue), 3 levels of brightness setting for each color allow shooters to find the perfect brightness needed for lighting and weather different conditions
• Shock proof, recoil, fog resistance (nitrogen filled); high quality aluminum alloy in durable black matte finish

User questions & answers

Question:	Will this sight work well on a smith and wesson m&p 15-22 sport
Answer:	Hi Jesse, this is great question. There's an automatic protection design.The stimulation is limited to 20 seconds and will automatically turn off for one minute before repeating the stimulation again for 20 seconds. If the dog doesn't return to the safe zone, the warning sounds and shock system will automatically shut down after three cycles. But it will immediately stops training if the dog retreats to the safe area.
Question:	What is the eye relief for this scope? I want to canter it next to my long scope but I'm not sure if I will be able to see out of it
Answer:	Hi, thanks for your question. Do you mean that how far the flag should be apart? It depends on the activity area you want to provide for the dog. You can adjust according to your needs. If there're any question, you can also contact our technical at +8613430924538.
Question:	Can it see over a fixed front sight or does it need a riser
Answer:	Hi, thanks for your question. We suggest to use in distance 22 Yds-872 Yds.
Question:	Dose this fit on a nerf rail
Answer:	Hi, thanks for your question. Our dog fence system comes with 50 flags that will meets daily use. And our dog fence system actually can also use without stakes because our gps system allow to set the control distance.

• TOOLS INCLUDED: Adjustable windage and elevation (tools included). Unlimited eye-relief and corrected parallax. Tubeless design with 33mm reflex lens and a wide field of view (15.8m@100m) for close to mid-range targets.
• PICATINNY RAIL MOUNT: Equipped with a built-in picatinny scope mount base that fits 20mm rails and provides easy sight remounting; Laser Class II, laser power less than 5mW
• 8 SIGHTING OPTIONS: Four interchanging reticle patterns with red and green holograph options (plus adjustable brightness) provide a total of 8 different sights to fine-tune your eyeshot from dawn to dusk.
• ULTIMATE DURABILITY: Aerospace-grade aluminum alloy construction for lasting dependability and easy maintenance and cleaning (cleaning cloth included).
• WATER/FOG/SHOCK PROOF: Water-proof, fog-proof and shock-proof properties protect internal components and enhance performance in all weather conditions. The light-weight design upgrades your open/concealed carry experience.

User questions & answers

Question:	Will this work OK on
Answer:	It will work as long as your 556/223 has the standard 20mm rails.
Question:	do you need to dismount to change battery
Answer:	No, you don't need to. The battery is accessible on the side, right in the control knob. To change the battery, just unscrew the battery cover, insert new battery +side up, then put the cover back. Hope this helps.
Question:	Can this handle the recoil of an 8mm rifle
Answer:	Have it mounted on a 45-70. Still in the process of sighting in. It jumps around a little when you change recticles. No magnification so at over 50 yards it is hard to bulls eye. It is about like shooting with iron sights but can get on target very quickly.
Question:	How well does this hold zero on
Answer:	Works very well. I have it on an 8.5" pistol build and at 10 yards, standing with no support, it holds a 2" group. Standing supported, it held a 1/2 inch group.

Product features

Windage adjustment

Elevation adjustment

4 different sizes

Brightness adjustment & battery

• 4 x RED/GREEN RETICLES: With four reticle patterns illuminated in red or green, this reflex scope offers a total of 8 different sighting options and 5 brightness levels to toggle between.
• PICATINNY/WEAVER MOUNT: Built-in scope mount base for 20mm (0.8”) rails. Allows for easy sight remounting with all required mounting tools and cleaning cloth included.
• FULL FIELD OF VIEW: 33mm reflex lens with tubeless design for a wide field of view (15.8m at 100m) that’s great for rapid-fire at moving targets from short to mid-range distances.
• COMPLETE CAPABILITY: Windage and elevation adjustable (tools included) for easy zeroing. Unlimited eye-relief and corrected parallax allow.
• WATER/FOG/SHOCK PROOF: Water, fog and shock proof for uncompromised performance in all weather conditions. Aerospace grade aluminum alloy construction endures years of heavy use.

User questions & answers

Question:	The reticles are very blurry. Is there some sort of protective film on the sight out of the box, does it need cleaning, or is it just a bad sight
Answer:	This may seem like a dumb question, but have you asked another person to view the reticle pattern(s) that appear blurry. It is very common for those with even mild astigmatism to notice irregular reflections of the reticle pattern (star like pattern instead of a clean circular dot being the most common example). This seems to be more pronounced for some people where entry level optics are concerned. If you and another person (ideally with clear vision) both observe a blurry reticle, then is could be a small bit of dust or something obfuscating the projector source's light pattern (or potential defect). Not sure what intensity setting you have it on, but I've found the first setting to be very bright and the higher settings (level 3-5) for both red and green to be too intense for indoor and even too bright for outside daylight conditions. It would have to be very bright outside or I'd need a pair of sunglasses to clearly view the the highest setting #5. In other words, the reticle looks blurry to me when I have it cranked up to too high of a setting (more isn't always better). I'd recommend setting the reticle to the dot pattern on level 1 intensity for either color. Relax your eyes and don't try to focus on the dot (distortion of your eyeball shape isn't helpful here). Just look at a point relatively distant (more than 10 ft. away) with the dot in your dominant eye path (keeping both eyes open). These are all things you may already be well aware of but could help others depending on experience level. I've known a few folks that have mild astigmatism that see a blurry star with most low tier red dot optics, but had no blurry star issues when they looked through a certain made in the USA brand's ($$$) red dot (reticle was round with crisp edges).
Question:	Will it fit Hi-Point C
Answer:	Not for pistols
Question:	Can this be used with lancer tactical lt16c aks74un ris carbine aeg airsoft gun (black
Answer:	Yes, provided the Lancer's rails are standard 20mm.
Question:	Is this too big for a ruger 22/45 lite pistol
Answer:	I mounted a Pinty red dot on my AR pistol. Mounting it on a 22/45 pistol would be a charming idea. Too big? I do not think so. Life is too short. Mount it on your pistol and enjoy. Pinty red dot is a quality piece of equipment.

Product features

Specifications:

• Objective diameter: 33mm
• Output: 1mW
• Tube diameter: 33mm
• 5 level brightness control: red/green
• Wavelength: 650nm
• Power: < 5mW
• Housing Size: 3.2x2.6inches/82x66mm
• Material: Aircraft grade aluminum alloy
• Integrated mount for standard 20mm rails
• Weight: 0.51lb

Reticle Adjustment

There are 4 illuminated reticles available for adjustment, letting you use the perfect one for your needs.

Laser Color Adjustment

For optimal targeting, you have a green laser for daytime use and red for dusk and night.

Wide Field of View

Our 33 mm silver-coated lens allows a wide field of view, up to 52 ft. (15.8 m) at 100 yards.