9 best bell bike computers

• 15 Functions include SPEED, TIME, DISTANCE plus SPECIAL FEATURES
• Easy to install; user tested installation manual for clear, easy to follow instructions
• Large readout
• Weather Resistant
• 2-CR2032 battery (included)

User questions & answers

Question:	can I use this on my bike set up on the indoor bicycle trainer and mount it to the back wheel
Answer:	This heater keeps up to 16 gallons of water ice free using only 80 watts.
Question:	Is this just for a bike only or can you also use it in a car
Answer:	Mine is blue
Question:	Will this work on a stationary spinning bike
Answer:	We are currently out of stock on the Commander Cooler bag. It is located in the main disc compartment though. Thank you
Question:	this is a wireless bike computer and use a sensor is in the wheel
Answer:	Yes, the cooler pouch is removable. Thank you

Product description

Functions: current, average and max speed, MPH/KPH, current to average speed, speed tendency and comparator, odometer, odometer save, trip distance and timer, 12/24 hour clock, scan, new trip reset, auto stop/start

• 20 functions measure performance, temperature, calories burned and more
• Additional functions include calories and fat burned, freeze frame memory, temperature, maintenance reminder
• Easy installation
• Weather resistant
• Battery included (1 button cell)

User questions & answers

Question:	How to turn it on?! I mean literally. After all measuring, I cannot turn it on to set it up
Answer:	As I remember, it turns itself on by movement. No on and off switch. Good luck...
Question:	I think I have set up everything properly, but when I begin to ride, the speed/mileage never calculates. Stays at zero. Any suggestions
Answer:	I don't think you have it set up properly. The magnet on the spoke has to pass close enough to the sensor - my guess is that this is your problem because you're saying it stays at zero, meaning it's not picking up anything. Every time that magnet passes close enough to your sensor, the speedometer registers one revolution.

Product description

The Bell Console 100 is an easy to use wireless computer that gives you all the data needed for a productive ride. Functions: current speed, maximum speed, average speed, kph/mph conversion, trip distance, 12/24 hour clock, elapsed trip timer. Batteries included (2 CR2032).

• One touch designed
• Easy to set up, no tools installation
• Large readout is easy on the eyes

User questions & answers

Question:	Would this work on a stationary bike
Answer:	It depends on what you are referring to as a stationary bike. If you are using a trainer that requires front wheel removal, the answer is probably not. Because you need to attach the sensor to the rear wheel instead of the front, it will not work with the computer receiver in its normal position on the handlebar. I am actually using it with the receiver closer to the rear wheel attached to a water bottle cage. It is awkward. If you're using rollers, it functions like normal. If you are using a pre-made stationary bike machine, it will depend on the configuration of the machine--they have so many different models. For normal use, this computer is simple and no frills at a very low price. It has a 2 feature display and it toggles between distance and time--but always displays speed. You might find this odd, as you may have to wait for either to display (a few seconds).
Question:	does this include cumulative travel distance
Answer:	There are two modes: the odometer/clock mode and the distance/time mode. The odometer tracks cumulative distance. The distance/time mode is for tracking a specific ride and can then be reset to zero.

Product description

Digital wireless multiple function computer for elite training - Functions: Current Speed, Average Speed, Max Speed, Current to-Average Speed, Speed Tendency, Odometer, Trip Distance, Trip Timer, 12/24 Hour Clock, Calories Burned, Fat Burned, Scan, Outdoor Temperature, Freeze Frame Memory, Backlight, ETA.

• Digital wireless technology for less interference
• Entirely Wireless including Pedal RPM
• Large backlit display for readability in low light
• Easy touch-and-go start
• Batteries included

User questions & answers

Question:	What battery does it take
Answer:	It takes a single 2032 as a battery.
Question:	I received mines and I cannot get it to work with my spin bike, are there seperate instructions for this? Not sure why it is not working
Answer:	Some things to try.- Change all 3 batteries to new ones.- Use stronger magnets.- Make sure magnet passes over the arrow (less than 5mm) on the sensor.- When in setup mode, activate each sensor (1 at a time) by holding down each reset button for 5 seconds.
Question:	Does it feature "maintenance reminder" function
Answer:	Yes, you can set it up for different miles.
Question:	the screenshot looks different than what is shown in the Bell Manual. Also shouldn't this unit take more than one battery being a double wireless
Answer:	There are several screen views so it is accurate, problem is i have never been able to get the cadence to work consistently, acyually got a refund. Yes it does require three batteries.

Product description

Bell Performance Cycling Gloves - Large - X-large Performance Padding Provides Shock Absorption Terry Cloth thumb panel to wipe away sweat Finger pulls make for easy glove removal Breathable, expandable nylon mesh construction for comfortable and cool

• large - x-large

Product description

The product is Bell Free Fit Platinum Series 15 Function Wireless Computer.

• Offers premium performance, wireless technology and a back-lit screen.
• The large, back-lit screen lets you see speedometer readout in low light riding conditions
• Functions include current speed, avg speed, max speed, current-to-avg speed, speed tendency, odometer, odometer save,
• Features also include trip distance, trip timer, 12/24 hour clock, calories burned, fat burned, scan, outdoor temperature, freeze frame memory
• No tools install; Battery included (1 button cell)

Product description

Functions: current speed, average speed, max speed, MPH/KPH. also speed tendency, odometer, trip distance, trip timer, 12/24 hour clock, scan & auto stop/start. Larger display readout is easy to see. Easy installation & weather resistant. Battery included. Functions: current speed, average speed, max speed, MPH/KPH Speed tendency, odometer, trip distance, trip timer, 12/24 hour clock, scan, auto stop/start Larger display readout is easy to see Easy installation & weather resistant Battery included.

• Functions: current speed, average speed, max speed,  MPH/KPH
• Speed tendency, odometer, trip distance, trip timer, 12/24 hour clock, scan, auto stop/start
• Larger display readout is easy to see
• Easy installation & weather resistant
• Battery included.

Product description

Speedometer and Odometer Wireless Waterproof Cycle Bike Computer with LCD Display & Multi-Functions by YS

• 【Auto Wake-up Function】Automatically wakes from sleep mode upon sensing vibration in the bicycle. Bright LCD display to easily view ride statistics.
• 【Multi-functions】Small size, light weight, wireless, waterproof design makes it convenient and durable. This bicycle computer measures speed, distance, and riding time. Exactly what any serious bicyclist or fitness fanatic needs to know for stats tracking.
• 【Day & Night Backlight 】Provides backlight for easy viewing during dark hours. The backlight will automatically turn on when any button is pressed between 18:00 and 06:00. Please note the slight rattle sound from device is normal phenomenon, which results from the design of wireless automatic function.
• 【Easy to Install &Use】Simple installation that only takes a few minutes. Easy to navigate interface with only two buttons to access all measurements. Customizable to most common tyre sizes for accurate stats tracking.
• 【Applicable】Road bicycles, mountain bikes, folding bikes,and other common bicycles are compatible with this bicycle computer. This bicycle computer MAY NOT be compatible with some electric-assist bicycles. If the computer display, sensor, and magnet can be installed within the specified distances device should be fully compatible. Please do not hesitate to contact us with any questions.

User questions & answers

Question:	How fast does this read. Top speed
Answer:	Hi ,it can be record the speed from 0-999kph.
Question:	Can you display the odometer and speedometer at the same time or do you have to cycle through them
Answer:	Yes, the speed and odometer do display at the same time. In fact, the screen shown in the ad shows the speed as the larger number and the odometer as the smaller numbers at the bottom of the display.
Question:	I have a terratrike and need to mount the sensors on the rear wheel. will that work? also, have the smaller tire version. can i calibrate for that
Answer:	I have this working with the sensor on my rear wheel, but I had to move to computer from my front handle bars to underneath the seat on the frame. I can check my speed/mileage by looking down, but it isn't easy like glancing down at the handlebar. This isn't ideal, but it's fine because I'm on a stationary bike. I will move it to the front wheel when I return to biking outdoors.
Question:	how do you install it. Is it difficult to install
Answer:	No, it is very easy to install it.From good friend M.Reed , you can know this 3 steps.There are three parts. Installation is very easy and just takes a few minutes.1;The magnet is mounted onto two spokes on the front wheel - using the built-in thumb screw. 2;The transmitter mounts to the front fork next to the magnet - it's attached to the front fork by two supplied wire ties. 3;The receiver clamps onto the handle bar using two supplied wire ties. To neaten it up, I trimmed off the excess wire tie ends using a wire cutter. Scissors or nail cutters will work if you don't have a wire cutter. 4;Since this is wireless, there is no cable required. 5; You program it to the size of your wheel, mph or kph, etc.

• 🎁 5 LANGUEGES ON LCD DIGITAL DISPLAY - Support for five language systems: English, Deutsch, French, Espanol, Italian. It’ s no longer a problem to deal with the non-native language of the operation instructions. The 2 Inch LCD screen of the bicycle odometer introduces a digital screen with no reflective blind spots, which helps to easily and clearly view your cycling data at a glance
• 🎁 MULTI FUNCTIONS TO MEET NEEDS - Our speedometer includes 14 features related to cycling data, and 5 performances of the odometer itself. Simple operation to track your outdoor cycling real time distance, current/max/average speed, riding time, calorie consumption, temperature, stopwatch, weekly riding time/distance etc. “FUNCTION RESET”: In the clock mode, press and hold (MODE) for 2 seconds to enter the system parameter setting
• 🎁 WIRELESS BICYCLE COMPUTER DESIGN - Compared with wired cycle computer, there is no need to worry about tangled wires on your handlebars any more. It is good looking and easily installed without need for extra wiring on your handle, becoming more convenient when riding
• 🎁 4 LINES DISPLAY SIMULTANEOUSLY - Allow multiple data to be displayed on one screen, providing a variety of riding statistics through press [MODE] key, so that you can clearly catch the process of different functions without having to bother switching other interfaces frequently. The waterproof performance keeps it moving in any environment or weather
• 🎁 PRECAUTIONS ABOUT INSTALLTION - 1. Remove the insulating sheet from the sensor and computer 2. Orient the front side of the sensor (with the word "SENSOR") toward the magnet. 3. The distance between the magnet and the sensor should be controlled ≤3 MM. 4. It is normal for the device to make a ball sound. The reason is that the wireless automatic function is working ! ! !

User questions & answers

Question:	Can the sensor be mounted on the back wheel to use with a trainer stand
Answer:	Hola, calculo unas 3 a 4 horas, dependiendo la intensidad de la luz
Question:	I need this to monitor a 10.5" wheel... is that possible
Answer:	Hi, there: Go to app" H Band", tap " ECG " in the dashboard and turn on ECG monitor feature, then put two of your fingers on the metal ring of watch and keep close touch, ECG report would show up in the app after 30 seconds. If still show lead failure, please try to wet your finger to enhance conductivity. Hope the info could help, thank you . Sincerely, NiceFuse Tech
Question:	what is the rubber ring for
Answer:	HI, there: Yes, the watch can keep recording your data without connection after the first time sync, and export data to app" H Band" when it's reconnected, so you could turn off bluetooth /GPS of your smartphone. Hope the info could help, thank you . SIncerely, NiceFuse Service
Question:	In biking what would the stopwatch be used for? Over all time on a bike run
Answer:	You can switch on spO2 monitoring in the app. I'm not how often it checks it. The spO2 readings on mine don't match the oximeter on my phone, which I have checked against hospital equipment, and it's pretty much dead on. So, I probably wouldn't depend on this watches readings if you have a reason to worry about your O2 saturation levels.

Product features

West Biking 5 Languages Bike Computer, With 18 Practical Functions, Waterproof Stopwatch Speed Tracker, Be Your Best Companion For Cycling ! ! !

Please bring this wonderful wireless bike computer during your cycling journey to feel the freedom and your speed, which helps you to measure data of your cycling trip or achieve your fitness goals easily.

Features:

1. LED Backlight: Backlight LCD screen provides high visibility during the day and night, allows you read statistics easily and clearly at any time.

2. Simple Operation: All measured values can be accessed with just 2 buttons, making it more convenient and durable.

3. Easy Installation: Comes with a standard mount for easy installation on your bicycle.

4. Widely Used: Small size, light weight, wireless & waterproof design, suitable for cycling or fitness enthusiasts.

5. 5 Languages: English, Deutsch, French, Espanol, Dutch. It’ s no longer a problem to deal with the non-native language of the operation instructions.

Record Your Progress in Bits and Pieces ! ! !

With the adoption of wireless signal transmission technology, our bike computer exerts a favorable anti-shock & anti-interference performance. You only need to install the wireless sensor and the magnet at a distance of about 3mm, and the sensor's front (with arrow marks) corresponds to the front of the magnet. Then it will have a good reception, so you do not need to worry about the data errors caused by shock and interference during riding ! ! !

18 Practical Functions

• BACKLIGHT ALWAYS MODE
• TOUCH CONTROL
• TEMPERATURE
• CALORIES
• FREEZE FRAME MEMORY
• TIMER AND CLOCK
• AUTO & MANUAL WAKE-UP
• ODO\DST\MXS\AVS\TRIP TIME

Day & Night Backlight

Provides backlight for easy viewing during dark hours ! ! !