3 best kickstands

A kickstand is a simple device commonly found on bicycles that serves as a support mechanism to keep the bike upright when it is not in motion. It is a practical accessory that aids in parking, storage, and maintenance of bicycles. Here are some key points about kickstands:

  1. Function: The primary function of a kickstand is to stabilize a bicycle when it is stationary. By propping the bike up on its kickstand, riders can park it without the need for additional support or leaning it against a surface.

  2. Types: Kickstands come in various types and designs. The two most common types are:

    • Center Kickstand: This type is mounted near the bottom bracket of the bicycle frame, typically on the non-drive side. It extends downward and contacts the ground to support the bike's weight.

    • Rear Kickstand: Rear kickstands, also known as side kickstands, are attached near the rear wheel dropout. They extend backward and downward to provide stability.

  3. Material: Kickstands are usually made from durable materials such as steel or aluminum to withstand the weight of the bicycle and resist wear and tear.

  4. Installation: Installing a kickstand typically involves attaching it to the bike frame at designated mounting points. The installation process may vary depending on the type and brand of kickstand.

  5. Convenience: Kickstands are especially handy for quick stops during rides, as they allow cyclists to park their bikes without needing to lean them against walls, fences, or other objects. This convenience is appreciated by commuters, recreational cyclists, and those running errands on their bikes.

  6. Indoor Bike Storage: Kickstands can also be useful for indoor bike storage. They help keep the bicycle upright and prevent it from tipping over, which can be particularly beneficial in tight storage spaces.

  7. Car Racks and Transportation: Some bicycle transport racks for vehicles are designed to accommodate bicycles with kickstands. This ensures that the bikes remain securely in place during transit.

  8. Maintenance and Repairs: Kickstands can make it easier to perform maintenance and repairs on a bicycle. With the bike stabilized, cyclists can work on their bikes more comfortably.

  9. Variations: Some kickstands are adjustable, allowing riders to fine-tune the angle and height at which their bike is propped up. Additionally, there are kickstands designed for specific types of bicycles, such as those with larger or smaller wheel sizes.

  10. Considerations: While kickstands offer convenience, there are a few considerations to keep in mind.They can add a bit of weight to the bike, and some riders may prefer the streamlined look of a bicycle without a kickstand. Additionally, on certain terrains or with heavily loaded panniers, a kickstand may not provide as much stability.

In summary, a kickstand is a practical accessory for bicycles that provides stability and convenience when parking, storing, and performing maintenance on a bike. It comes in various types and materials, making it a versatile addition to a cyclist's equipment, especially for those who frequently use their bikes for commuting or errands.

Below you can find our editor's choice of the best kickstands on the market
  

BV Adjustable Bicycle Kickstand with Concealed Spring-Loaded Latch, for 24-29 Inch Bike Kickstand

BV USA

Based on 9 reviews Check latest price

Product description

The KA76 kickstand is a unique patented design that features a hidden adjustability latch. The spring-loaded latch lifts up, allowing the foot to smoothly glide along the kickstand and lock into place when the latch is closed. A steel hexagonal bolt prevents the foot from sliding off completely and deters vandals. Adjust the kickstand without any tools, anywhere, anytime.

Made of aluminum alloy, the kickstand is designed to fit most lightweight, midweight and cruiser bicycles 24" to 29" and easily installs with a bottom bracket mount that fits on a bike's chain stay neck. Riders can adjust their bikes to rest at any angle, which is great for balancing bikes in places where the ground is uneven. It is available in ED black or V-Polished silver.

The reinforced plastic foot has a non-slip sole to prevent slipping on wet surfaces and sinking in mud.

Specifications

Material: Aluminum Alloy

Bicycle size: 24"-29"

Dimensions: 14"-16.5" x 0.5"-2" x 1.5"

Weight: 0.56 lbs.

  • Tool-less adjustabe length - Spring-loaded latch for adjusting the length of the kickstand
  • Non-slip sole and wide reinforced plastic foot prevents slipping and sinking in mud
  • Steel hexagonal bolt prevents the foot from sliding off the kickstand and deters vandals
  • Any angle stance (great for balancing bikes on uneven ground)
  • For bicycles 24"-29"

User questions & answers

Question: I couldn’t get this kickstand on my road bike. What am I doing wrong
Answer: Try taking it to a bike shop & ask them what you're doing wrong. A good shop will tell you how to put it on. Also, look for how to & install videos on youtube
Question: Will this fit Vilano Diverse 3.0 Hybrid
Answer: I installed this today on my Vilano Diverse 3.0 (53cm model). Works well so far. No issues, installed easily with the included bracket and long bolt. I does not interfere with the pedals. The bottom half of the kickstand is plastic but it feels solid. I like the look of the kickstand overall, it is much nicer than the cheap generic ones sold at Wallymart. I did not extend the kickstand all the way, it would have been too long, so if you have the larger Vilano (57cm) it will probably work as well.
Question: Will this fit a Diamondback Dual Sport
Answer: Yes. It's adjustable, so fit all bikes. I do have GT Transeo Dual Sport and fit perfectly.
Question: Could anyone tell me the size of the hex bit I need for the short bolt
Answer: The above answer is no longer correct. They are shipping it with new bolts and the shorted hex bolt key is so large I dont have an allen wrench that will fit it..... Larger than 8mm now.

Product features

BV Adjustable Bicycle Bike Kickstand with Concealed Spring-Loaded Latch

The KA76 kickstand is a unique patented design that features a hidden adjustability latch. The spring-loaded latch lifts up, allowing the foot to smoothly glide along the kickstand and lock into place when the latch is closed. A steel hexagonal bolt prevents the foot from sliding off completely and deters vandals.

Adjust the kickstand without any tools, anywhere, anytime.

Hassle-free/ Toolless Design

Our newest design of adjustable latch allows you to adjust the height without any tools.

Just simply pull the latch up, adjust the desired height and release the latch.

No more hassle.

Installation Measurements

Please make sure there is enough space to install the center kickstand before purchasing. The center kickstand might hit the pedal if the space is not enough.

Parts

- Kickstand x 1.

- Long bolt x 1.

- Short bolt x 1 .

- Metal bracket x 1.

- Washer x 1.

Two ways of installation

a. Locate your chain stays as shown in the photo.

b. Check if you have mounting plate(flat plate with hole for screw) between your chain stay. If you do, go to the 1st right image. If you don't, go to the 2nd right image.

Bicycle with mounting plate (Use short bolt)

1. Remove the screw, washer and metal bracket off the top of the kickstand.

2. Place the kickstand underneath the plate, adjust height by pushing lever. (To further lock into place. using Allen key to tighten the flat screw underneath the latch.)

3. Place screw in hole to match with the kickstand and tighten by an Allen key or wrench.

Bicycle without mounting plate (Use long bolt)

1. Remove screw, washer and metal bracket.

2. Place the kickstand between the chain stays.

3. Place the metal bracket on top of the chain stays.

4. Tighten the kickstand by tighten the screw and washer with a wrench.

TOPCABIN Bike Kickstand Adjustable Aluminium Alloy Bicycle Kickstand Bike Side Kickstand Fit for 22" 24" 26" 28" Mountain Bike/700 Road Bike/BMX/MTB

TOPCABIN

Based on 3 reviews Check latest price

Product description

Note: This kickstand is not suitable for 20 inch bike, please pay attention to it before you buy!





It is suitable for mountain, road bike, folding bike-fixed all tubes!



It makes your bicycle convenient to parking



Waterproof and wear-resisting, durable to use



Made of aluminum alloy material, with top quality and very strong



Fit for 22" 24" 26" 28" tire and 700 road bicycle

Package Contents: bike kickstand * 1, rubber mat * 1 pair, wrench * 2

  • Suitable: This bike kickstand fits for 22" 24" 26" 28" Mountain Bike/700 Road Bike/BMX/MTB
  • It makes your bicycle convenient to parking. Package Contents: bike kickstand * 1, rubber mat * 1 pair, wrench * 2
  • Length adjustable: This bike kickstand with wrench to loosen the middle of screw, length can be adjustable between 12.2”-14.2”(310-360mm). Fits on oval tube diameter 15-28 mm.
  • Made of aluminum alloy material, with top quality and very strong,Waterproof Anti-rust and wear-resisting, durable to use
  • 12-month warranty, customer satisfaction guarantee and 24/7 customer support.

User questions & answers

Question: It says will fit 20" 24" and 26". Does this mean wheel size, or frame size? I have a 27.5 inch wheel with a 22 inch frame
Answer: fit 20" 24" and 26",This mean the wheel size
Question: We bought this for the Diamond Back 20" bike. It seems to be too long. Help
Answer: Slide out the bottom leg and use a hacksaw to remove a piece to make it short enough. I did this for my son's 24" bike and it works great. His bike was too small to fit a kickstand behind the bottom bracket, so this was the only solution, and now it is perfect.
Question: Will it rust over time
Answer: I have had it for about four months. I have ridden my mountain bike in wet mud and washed my bike a few times. I have not seen any rust on it to this date.
Question: will this fit the Pure fix "kilo" 58 CM frame 700 x28 tires
Answer: My bicycle is also a 700cx28 tires. The kickstand you're inquring about mounts on the (left side) rear of the frame under the brake cable, close to where the brake cable connects to the rear tire brakes. If your rear frame is not to thick it should fit... Your botom rear frame where it connects to your rear tire can't be over an inch thick. The kickstand mounts to your bicycle rear frame in two parts. You should be able to mount the two part kickstand under the rear brake cable near where the rear brake cable connects to the rear wheel brakes... It should fit, after all the kickstand was designed to fit several sizes including the size 700x28 series bicycles. Good luck...

SEISSO Bike Kickstands Center Mount for 16 18 20 22 Inch Bicycles Adjustable Aluminum Alloy Kickstands for Mountain Bike Road Bicycles Kids Adult

SEISSO

Based on 435 reviews Check latest price
  • 【NOTE】Due to the different bike frame structure, even same size, the vertical height from the ground will be different. Before placing an order, please measure the vertical height from the installation point to the ground to make sure it fits your bike. Please ensure that the scale value range is between 20.2cm-24.2cm (7.95in-9.53in).
  • SUITABLE: This Alloy Bicycle Kickstand fits for most 16 INCH - 18 INCH TIRE Mountain Bike/Road Bike/BMX/MTB/Sports Bike, convenient for you to park a bicycle. 【NOTE】Please choose the size according to the tire mark, as shown in the picture. Not For Snowmobile .
  • LENGTH ADJUSTABLE & EASILY INSTALL: This mountain bike kickstand with wrench to loosen the middle of screw, length can be adjustable. Package include free 4mm, 8mm wrench for you to easily install.
  • NON-SLIP FOOT: The Aluminum Alloy Bicycle Kickstand comes with an wide anti-slip reinforced rubber foot to prevent slipping on wet surfaces and sinking in mud.
  • UPGRADED VERSION & DURABILITY: This bike kickstand using anti-rust aluminum alloy material, waterproof and wear-resisting, strong and durable.

Product features

Adjustable Bicycle Bike Kickstand Height with Inner-Hexagon Screws

Due to the different bike frame structure, even same size, the vertical height from the ground will be different. Before placing an order, please measure the vertical height from the installation point to the ground to make sure it fits your bike.

Available sizes according to tires

We provide optional sizes, you can choose the appropriate bike kickstands according to the number display on the tire. The number 16*2.4 for example, 16 represents 16 inch bike and 2.4 represent the tire width. So when the tire shows the 16, it means you need to choose the 16 inch kickstand.

ONE

Remove the screw, gasket and metal bracket off the top of the kickstand.

TWO

Place the bracket under the flat plate to lock in place further, put the screw in the hole to match the bracket, then tighten it.

THREE

After tightening, adjust the height of the kickstand with hexagonal screws to the proper position to ensure that the bicycle can be parked stably.

FOUR

The effect after the correct installation, please reconfirm whether the gasket of the kickstand has been tightened again.

Details of the Kickstand

  • This bicycle kickstand using anti-rust aluminum alloy material and anti-slip reinforced rubber foot to prevent slipping on wet surfaces. Waterproof, sturdy and wear-resistant, you can park your bike safely in rainy or snowy days, or install it on a mountain bike, which can stable adapt to uneven terrain.
  • There is a folding "small mechanism" attached to the kickstand. The screws at the connection are firm and closely connected with the kickstand. They are not easy to fall off and are flexible, allowing the kickstand to be quickly folded.
  • The height-adjustable part has a gasket design at the rear of the screw, which can be fixed firmly after adjusting the height.

Bike Kickstands also Suitable for Children

Took off your child's training wheels and you might need the bike kickstand to stand the bike up instead of dropping it on the ground. Let your child enjoy a happy childhood while learning to ride a bike.

Latest Reviews

View all