3 best e bike kit

E-bike kits are aftermarket electric bicycle conversion kits that can transform a traditional pedal-powered bicycle into an electric-assist bike. These kits have gained popularity in recent years and offer a cost-effective way to enjoy the benefits of electric cycling. Here's what you need to know about e-bike kits:

  1. Conversion Options: E-bike kits come in various forms, but they typically include a motor, battery, controller, and associated wiring. Some kits are designed for the front wheel, while others are for the rear wheel. There are also mid-drive kits that replace the bike's existing crankset.

  2. Motor Types: E-bike kits come with different types of motors, including hub motors and mid-drive motors. Hub motors are located in the wheel hub (either front or rear) and provide a boost to the wheel's rotation. Mid-drive motors are positioned in the bike's center, near the pedals, and transfer power to the bike's chain, providing a more natural riding experience.

  3. Battery Capacity: The battery is a crucial component of an e-bike kit. Battery capacity is measured in watt-hours (Wh), and a higher capacity generally means longer range.The range of an e-bike depends on factors like terrain, rider weight, and pedal assistance level.

  4. Pedal Assist and Throttle: E-bike kits often offer both pedal-assist and throttle modes. Pedal-assist provides power assistance when you pedal, making it easier to ride and allowing you to control the level of assistance. Throttle mode, on the other hand, allows you to control the motor's power with a twist grip or thumb throttle, similar to a motorcycle.

  5. Range and Speed: The range of an e-bike kit can vary widely, from 20-100 miles or more on a single charge, depending on the battery capacity and other factors. The maximum speed is usually limited to comply with local regulations, often around 20-28 mph (32-45 km/h).

  6. Installation: Installing an e-bike kit can be done by a skilled bike mechanic or a confident DIY enthusiast. It typically involves attaching the motor, battery, and controller to the bike's frame and wiring them together. Mid-drive kits may require more technical expertise.

  7. Legal Considerations: E-bike regulations vary by country and even by state or province. It's essential to be aware of local laws regarding e-bikes, including speed limits, power limits, and where e-bikes are allowed to be ridden.

  8. Cost: E-bike kits offer a more affordable way to convert an existing bicycle into an electric bike compared to purchasing a ready-made e-bike. Prices can range from a few hundred dollars to over a thousand, depending on the kit's quality and features.

  9. Benefits: E-bike kits provide several advantages, such as reducing the effort required for commuting and leisure cycling, making cycling accessible to a broader range of people, and reducing the environmental impact of transportation.

  10. Maintenance: Like traditional bicycles, e-bikes require regular maintenance, such as tire checks, brake adjustments, and occasional motor and battery maintenance.

E-bike kits offer a convenient way to enjoy the benefits of electric cycling while retaining the flexibility of your existing bike. Before purchasing a kit, consider your riding preferences, local regulations, and the specific features and components of the kit to ensure it meets your needs.

Below you can find our editor's choice of the best e bike kit on the market
  

Voilamart 26" Rear Wheel Electric Bicycle Conversion Kit, 48V 1500W E-Bike Motor Kit with LCD Display, Built-in Programmable Controller and PAS System, 750W Power Limited for Road Bike

Voilamart

Based on 61 reviews Check latest price

Product description

Our electric bicycle kit has been upgraded!!

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You’ll be out cruising along at 31mph (50km/h) without a sweat!



Key feature:

* Built to the highest international standards, CE

* 48V 1500W and 750W super power brushless gearless hub motor

* Restricted to 750W and 24 mph (38km/h) by default as a road-legal kit

* Nylon tire& alloy rim& galvanized steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Built-in powerful controller guarantee big current supply

* LCD display shows battery level，pedal assistance settings and adjustment speed

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist



Upgraded Intelligent Motor:

* Allow you to swap power modes from 0 -1500W power by “PO8 SpeedLimit” Adjustment of LCD Meter.

* Still remain the full 1500W power with no speed control.



Specifications:

Wheel type: Rear Wheel(26"/48V/1500W)

Motor: Brushless Gearless

Tire: Nylon

Rim: Alloy

Power: 1500W / 48V or 750W / 48V

Torque: 45 N.M

Spokes: Steel, 12G×0.1"

Max speed: 0-50km/h

Wheel Size: 26"

Max load capacity: 551lbs

Wheel Axle: 8.27” x Φ0.39"



Package Included:

1x Brushless Gearless Motor Rear Wheel

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Twist Throttle)

1x Pair of Brake Handles

1x Wire Hub

1x LCD meter

1x Manual

  • 48V 1500W Powerful brushless gearless motor with 34mph (55km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
  • Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 551LB / 250KG Max Load Capacity.
  • LCD display shows battery level and pedal assistance settings; Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display. Built-in powerful controller guarantee big current supply
  • Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Cable Ties & Plastic Coil, Wire Hub, Pedal Assist Crank Sensor, Twist Throttle, One Pair of Brake Handles, LCD Meter, Manual. (Note: Battery not included)
  • CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah is required.

User questions & answers

Question: is regenerative braking available
Answer: We needed just the glass and they sent us a whole new unit. Some of the "boulder" area above glass has chipped off already.
Question: I have an old fashioned cruiser. Will this fit? Do I need to measure anything on my bike
Answer: I asked for a new shade replacement only after mine was cracked upon delivery and they sent the whole unit.
Question: If I use 750w limit setting can I use s battery rated let say 48v for 750w motor
Answer: Ours is open on the bottom. You can reach your hand in to change the light bulb.
Question: will the rim handle a 3.5 inch wide tire? 26" by 3.5" wide tire or is the rim width too narrow
Answer: I have a MACBook Pro 13 inch Mid 2012 laptop. It almost fit well. Was loose in one side after a while. Pretty, but it cracked quickly.

JAXPETY 48V 1000W Electric Bicycle Cycle E Bike 26" Front/Rear Wheel Ebike Hub Motor Conversion Kit Hub Motor Wheel

JAXPETY

Based on 219 reviews Check latest price
  • 🚴Rear wheel: 48V 1000W and 750W super power brushless gearless hub motor. It is the rear wheel, couldn't be used on the front.
  • 🚴Restricted to 750W and 19.88mile/h by default as a road-legal kit.
  • 🚴Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power.
  • 🚴Aluminum alloy powerful controller guarantee big current supply.
  • 🚴Twist throttle has battery level display and power-cut off button.

User questions & answers

Question: Will this battery work ebike li-ion battery 48v20ah 1000w scooter electric bicycle motor bms charger us
Answer: If it's a 48v battery, then yes.
Question: What kind of Battery do you need for this
Answer: Ideally 48-52v 20ah thats 30mph for 20miles no peddle and alil juice left over
Question: my front wheel is 28 x 1.75 will this work
Answer: No you have a 28” rim and this is a 26” rim.
Question: What’s the top speed at 1000w setup? Looking at a 48v 20ah battery so I’m lookinh for top speed with a 25+ mile range
Answer: I have that setup 48V 20AH and my top speed is 30 mph. I have not done a range test, but will try to update later with range info too.

Product features

JAXPETY48V 1000W E-Bike Rear Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You will be out cruising along at 28mile/h without a sweat!

Note: 1.Our product is compatible with many kinds of battery. The system requires a 48 Volt electrokinetic cell battery (Li, lead-acid, NiMH battery etc.) with a nominal capacity not less than 12Ah. 2.Battery and charger are not included in package. 3.The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.

  • Package Includes:
  • 1x 48V 1000W Motor
  • 1x 26" Front Wheel / Rear Wheel
  • 1x 48V Controller
  • 2x Hand Brakes
  • 1x Twist Throttle
  • 1x Battery Power Indicator
  • 2x Handle Grips
  • 1x Harness
  • 1x Battery Carrying Bag
  • 1x User Manual

Sharing From Our Precious Customers

Anbull 26" Front Wheel E-Bike Conversion Kit, 48V 1000W Electric Bicycle Powerful Hub Motor Kit with Intelligent Controller and PAS System

Anbull

Check latest price
  • 【High-Performance】 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed;maximum current 36A, low voltage protection is DC42±0.5V.
  • 【High-quality Durable Material】 Nylon tires + stainless steel alloy spokes + stainless steel alloy wheels + rare earth metal magnet motors greatly improve product quality and driving efficiency, so as to provide you with a better experience.
  • 【Humanized Design】 The throttle has battery power display and power off function, and the auxiliary pedal function can carry 150-200KG weight. Such an intimate design is convenient for your use.
  • 【Package Includes】Kits include all necessary components for installation; Motor/Wheel*1, controller*1, torque arm*1, brake levers*1, backpack*1, manual*1, yellow junction box*2, spring wire*1, connecting wire* 2 (black*1; red*1), pedal assist sensor*1, and cable ties*6. Battery and tire is not included.
  • 【Quality Assurance】 Refit your bicycle, let you enjoy the fun of riding, complete accessories, safe and reliable quality. If you encounter any problems during the use of the product, please feel free to contact us, we will serve you 24 hours a day.

Product features

Package Including

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pair of Handle Bars (included Twist Throttle) 1x Pair of Brake Handles 1x Backpack

1x Manual 2x yellow junction box

1x Spring Wire

1x Black Wire

1x Red Wire

1x Assistant Sensor

6x Cable Tie

Wheel Motor Wire Connections

This figure is an introduction to these lines. It seems complicated but simple and easy to operate.

When installing, you can refer to this picture: blue to blue, green to green, yellow to yellow.

For specific installation steps, you can also refer to the video on the product page.

Installation of the Brake Handle
1:1 Pedal Assistance System
Quality Materials

Tire: Nylon

Wheel friction: alloy double wall

Cracking bar: steel

This makes the product more durable.

Motor Controller

Size：7.08*3.54*1.77 inch

Controller Parameters: DC48V, 1000W

Please check carefully before buying.

Handle Bars

Accelerating handle with a battery display will remind you of when to recharge.

You can freely adjust the power by turning the handle, and the corresponding indicator will light up.

Latest Reviews

View all