13 best indoor bike stand

• Stability On Any Surface: Built with a wide base and low stance for unshakable balance. Features 5 adjustable antislip rubber feet to even out any uneven flooring
• Spin In Silence: Smooth, seamless design and noise reduction resistance wheel mean you there’s no need to amp up the volume when you build up the burn (Note: The noise is mainly related to the materials and tread of bike tires. We highly suggest you to use road bikes because the noise will be louder if MTB is used.)
• 6 Resistance Settings: Train to your standards with bar-mounted remote and wide range resistance curve to simulate all cycling conditions
• Easy Bike Release: Ready to head outside? Just hit the press-down lever clamp to easily release and remove your ride. Front wheel riser block and rear quick release lever are included for quick installation.
• Great Compability:The Indoor Bike Trainer Stand fits any road or mountain bike with a 26-28" or 700c wheel and with rear wheel axel between 4.92'-6.57"

Product features

Sportneer Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand with Noise Reduction Wheel

Silky-smooth Spinning

Our specialized noise-reduction wheel will make your workouts as quiet and can be. Better still, the reduced friction design prolongs the life of your bike tires for maximum riding time.

The stationary bike stand's noise reduction resistance wheel works to reduce the hum generated by your spinning rear wheel, so you won't have to pound out the jams and whirr the house down just to get some tunes going while you ride- much to the relief of your girlfriend, dog, and disgruntled neighbors. Also, the smoother resistance wheel can prolong the lifespan of your bicycle.

Easy to Assemble, Easy to Use

Ready to head outside?

Just hit the press-down lever clamp to easily release and remove your ride.

Short on time? No Problem.

The Sportneer Indoor Bike Trainer Stand can be assembled and disassembled in just a few short minutes. Just lock your bike in place, set your ideal resistance, and get pedaling!

Great Compability

This Indoor Bike Trainer Stand fits any road or mountain bike with a 26-28" or 700c wheel, and with rear wheel axel between 4.92'-6.57"

Adjustable Rubber Feet

Thanks to 5 level adjustable anti-slip rubber feet, this bike trainer can keep balance on uneven floor

Keep Your Bike Ready

Front wheel block and quick-release lever were included

Extreme Portability

Super tiny size for daily use and easy storage

Extended size: 22"x22"x15.5"

Folded size: 21.3" x 7.9" x 25.2"

Product description

BalanceFrom Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand with Front Wheel Riser Block, Black.

• Noise (important) - there will be load noise when working with rough tires. Quite when working with road bike tires
• Works on any surface - Simulates real cycling feel, rubber feet will prevent scratching wood floor. Built with a wide base and low stance for unshakable balance. Max load 330 lbs.
• Easy to install and release - install process is easy. Quick release clamp helps clamps your rear wheel tightly. It also helps to take the bike down much easier than other bike trainers
• 8 resistance settings - 8 levels magnetic resistances meet your specific needs about resistance & speed; handle bar mounted resistance controller easily lets you adjust resistance
• Wide compatibility - balance From bike trainer stand Fits any road or mountain bike with a 26-28" Or 700C wheel

User questions & answers

Question:	Can this be used on a bike with no gears
Answer:	I think so. The 9 yr old should have no problem, and i doubt the 6 yr old would either. The arm that holds the wheel dosent have alot of tension. It moves quite easily. I think its used more as a guide for the wheel. I really like the product and would recomend it.
Question:	Can you use this with a BMX bike
Answer:	I'd have to agree with previous answer. You could definitely make the rack steady in the bed but with just one wheel sitting in the cradle and no straps for either wheel I wouldn't advise it.
Question:	Can i use this on my bike without qr axel? i just have bolts on each side of my mountain bike
Answer:	15" x 19" x 6" when folded
Question:	My kit was missing the front wheel riser that is shown in the image and listed as part of the product. Where can I obtain it
Answer:	front tire or rear tire off the floor only. not the whole bike.

Product features

BalanceFrom Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand

About noise, our bike trainer featured noise reduction technology, will be super quiet with road bike tires, and all bike trainer will be loud with rough tires. Such as mountain bike tires. To solve this problem you can search (slick tire). And replace your rear outer tire with slick tires, it will be quiet.

Works On Any Surface

Simulates real cycling feel, rubber feet will prevent scratching wood floor. Built with a wide base and low stance balance. Max load 330 lbs.

8 Resistance Settings

8 levels magnetic resistances meet your specific needs; handle bar mounted resistance controller easily lets you adjust resistance.

Easy To Install And Release

Install process is easy. Quick release clamp helps clamps your rear wheel tightly. It also helps to take the bike down much easier.

• Max. Load Capacity: 265 lb / 120 kg; Suitable for 26'' to 28'' and 700C wheels;Unfolded overall dimension: 21.5 x 23.8 x 14.8’’ / 54.5 x 60.5 x 37.5 cm (WxDxH); Folded overall dimension: 21.5 x 7 x 17.3’’ / 54.5 x 18 x 44 cm (W x Thickness x H)
• Protective levelness-adjustable feet caps: This magnet turbo trainer is secured by four non-slip feet caps, to prevent the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.
• Smooth operation: This low-noise magnetic turbo gives you a quiet exercise environment. Please note that the noise/friction sound comes from the friction between the wheels and the trainer. Our indoor bike trainer itself doesn’t contain any noise-causing parts.
• Why an indoor bike trainer: When the bad weather tries to stop your cycling training, or somehow you just don’t feel like leaving the house and driving to the studio to get in your daily spin classes, then the indoor bike trainer is a handy and practical solution to your worries. With the cycling trainer, you can exercise at home with ease and leave those subjective or objective excuses behind.
• Use Tips: This bike trainer is designed for bikes with quick-release axles. Thru-axle adapters (not included) are needed for thru-axle bikes. For reducing humming sound, we recommend equipping your bike with slick tires and using the bike trainer on a carpet.

User questions & answers

Question:	Does it come with the front wheel riser
Answer:	Magnetic Bike Bicycle Trainer Indoor Stationary Exercise Stand Steel Frame Our indoor bike trainer is constructed of quality magnet, corrosion-resistant alloy roller, and powder coated high carbon steel stand, with the ability to support up to 264.6lb. It features a sturdy mounting system and comes with a quick-release skewer for the rear wheel hub and front-wheel support to stability and safety. This turbo trainer fits for 26'' to 28'' and 700C wheel sizes. Also, its foldable design makes it easy to store and carry. Note: The noise is mainly related to the materials and tread of bike tires. The use of road bikes is highly suggested because the spinning sound will be louder if mountain bike is used. We also recommend using the bike trainer on a carpet to reduce noise. Materials: aluminum alloy, iron, plastic, magnet; Package included: 1 x Bike Trainer; 1 x Front wheel riser block; 1 x Rear wheel skewer; 1 x Instruction
Question:	Can u adjust resistance by shifting the gears on the bike
Answer:	Not very well but somewhat. Mostly you have to tighten and adjust the roller on the rear wheel. I have 18 gears but had it on the front middle chain ring. When next I ride on the ground, I will make sure I put it on the biggest ring. I can't get the front shifter to work because there isn't enough torque. My rear shifter does work but isn't enough to increase the resistance very much. It could work differently on your bike. PS. The directions are very poor and it was not clear how to lock down the wheel stand. My bike fell off the first time I used it. Upon further examination and analysis, I found the plastic rings that you slide toward the hub to lock the things that screw in. Now it works fine. The directions have almost no words and very blurry, smallish photos.
Question:	How can i adjust resistance
Answer:	Two ways. Tightening the wheel against the turbine and by gearing down.
Question:	I am looking for one that comes with a front wheel riser..some are saying this model comes with one some are saying it doesnt What does the Co. say
Answer:	I just received my bike trainer. It does come with a front wheel riser, but it is a hard plastic one and not very good. I ordered a rubbery one via another company for about $8 that works great and I am very happy with.

Product features

Magnetic Bike Bicycle Trainer Indoor Stationary Exercise Stand Steel Frame

Our indoor bike trainer is constructed of quality magnet, corrosion-resistant alloy roller, and powder coated high carbon steel stand, with the ability to support up to 264.6lb. It features a sturdy mounting system and comes with a quick-release skewer for the rear wheel hub and front-wheel support to stability and safety. This turbo trainer fits for 26'' to 28'' and 700C wheel sizes. Also, its foldable design makes it easy to store and carry.

Note: The noise is mainly related to the materials and tread of bike tires. At least half of the noise comes from the bike itself. Such factors that contribute to the noise are how well your bike has been tuned (alignment and lubrication of front and rear derailleurs, cassettes, chain, gears, hubs) as well as your bikes tires.The use of road bikes is highly suggested because the spinning sound will be louder and it possible to wear out the tires if mountain bike is used. We also recommend using the bike trainer on a carpet to reduce noise.

Note:

Although the mounting system can be compatible with most quick release skewers, we recommend replacing the original quick release skewer with ours to reduce risk of damage. Furthermore, our quick release skewer is also functional in the daily use of bike, so the replacement can also spare you from changing the quick release skewers too often.

• Original Design: Leans against wall & holds bike using gravity
• Versatile: Elegant design looks good in any room or garage
• Construction: Industrial-grade powdercoated steel & custom molded arm covers
• Dimensions: 86" x 23.5" x 13.75" / 2184 x 597 x 350 mm
• Fully Adjustable: Independent arms accommodate any bike style
• Quick Assembly: Easy to assemble with regular screwdriver
• Max Weight: 100 lb / 45 kg

User questions & answers

Question:	How far does the stand come from the wall
Answer:	Not far. The top bar has a flat hunk of plastic (an inch or so thick) that must make direct contact with the wall. The legs curve forward a bit, and they probably sit about a foot from the wall, I reckon.
Question:	Will this work on carpet as well
Answer:	I have mine on carpet and it works great.
Question:	We have a shed with an inside side height of 72". Any way this will fit
Answer:	Cut a hole in the roof of your shed.
Question:	Will this work with two bikes with women's frames? The photo shows men's frames - which have the straight bar across instead of the angle
Answer:	Might help to get a horizontal adapter bar for women’s frames. They are used for trailer hitch bike racks. Typically run about $10-$20.

Product features

delta Cycle & Home

STEP 1

Installs in minutes. No drilling required. Our ground-breaking design leans securely against any wall with no permanent attachment.

STEP 2

Our rubber coated protective arms can infinitely adjust vertically and horizontally to fit any bike, including kids and womens bikes.

STEP 3

Once adjusted, storing and removing your bike is a breeze. Elegantly designed to suit homes, apartments, condos or your garage.

• A Real Space Saver - Free up 3.5 feet of floor space in your living room, bedroom, or garage; Bike Nook lets you store your bicycle instantly in a handstand position; This specialized, upright design offers space, safety and stability in just seconds
• Quick and Simple - Struggle no more to lift and put heavy bikes on a hanger; Just roll the back wheel onto the ramp, pop the front wheel up and lock in place on the vertical brace, and then secure the front wheel with the strap for added stability
• Safe Storage - Bike Nook will prevent your bicycle from damaging the floors, ceiling, or any wall in your apartment or home; It's the best organizer to keep your bicycles well protected from thieves or weather damage
• Universal Stand - Bike Nook is ideal for indoor use, or in covered sheds and balconies; It’s designed to store all types of bicycles, such as mountain, road, and beach cruiser types; It can fit any bike with a wheel diameter of 10 inches or higher
• Fast Repair - The upright design also permits for easy maintenance for your bike; you can fix any issues with the frame, wheels, brakes, or gears; Bike Nook is the easiest repair rack for fixing or installing any accessories necessary to improve your cycling experience

User questions & answers

Question:	Does the front wheel strap to stabilize the front tire come with this kit or is it sold separately
Answer:	The strap is included with the kit
Question:	Will it work with a 2.75 in MTB tire
Answer:	I have 2.8in tires on my MTB and it did not work for it. The track is too narrow for the tire to settle in stable.
Question:	Will this wirk for fat tire bikes? I have 4.5” wide tires on my winter ride
Answer:	Definitely not. It doesn’t work with my 2.8” tires.
Question:	Does this work with a rack and basket
Answer:	I don't know what rack you're referring to. The bike sits with the back tire in a metal, "C" shaped, horizontal track, and the front of the bike is raised until it (the Bike) is vertical. The bike stays vertical with the help of an adjustable metal bar that supports the seat stem and a strap that keeps the front tire from moving. I do not have a basket. But, if I did, it would be no problem as long as it is on the front of the bike. A back basket would not work. I like the rack and the additional floor space it provides.

Product features

A Brilliant New Way To Quickly & Easily Store Your Bike!

Bike Nook lets you store your bike instantly in a space-saving handstand position, freeing 3.5 feet of floor space in your living room, bedroom, or garage!

• Easy-to-use upright design means no more struggling to lift & hang heavy bikes to make room in your house.
• Prevents bikes from scratching or damaging walls, ceilings, cars, & more while you store.
• Lets you keep your bike inside, protected from bike thieves & other damage.
• Adjusts to various heights, for bikes with 10 inch wheel size or bigger; so it's perfect for mountain bikes, road bikes, racers, kids' bikes, beach bikes & more! When purchasing multiple Bike Nooks from Thane add ASIN: B07XY9QWXB Bike Nook Bike Connector that lets you instantly create a bike stand by connecting 2 or more Bike Nooks together

FAST & EASY TO USE

WORKS WITH ANY BIKE

*Bike Nook is suitable for bikes with 10in (25cm) wheel size or bigger.

SAVES SPACE IN ANY ROOM

• Vertical Bicycle Rack: The Vertical cycling floor stand is designed to store a bike in your living room, bedroom or garage, suitable for most bikes with the tires less than 2.4" in width. PDF instructions included.
• Adjustable Height: The height of the bike stand is 22.4”-30.3”. Adapts to different heights of mountain bikes, road bikes, racers, children' s bicycles, beach bikes , etc.
• Movable Upright Rod: Swingable (8°tilt）vertical rod that adjusts the support position and avoids getting stuck on the bicycle node.
• Floor Space Saving: Free up more valuable space and save floor space, great solution for limited indoor space, can be stored in corridors, balconies, warehouses, tool rooms or other places.
• Easy Assembly: Don't need drilling, no damaging walls or ceilings. Durable steel with powder coated finish, no scratching bicycles. Screws and anchors included, store your bicycle quickly and easily.

User questions & answers

Question:	How do I assemble this item? It arrived with no instructions
Answer:	It is very easy to assemble, I too feel the same way but looking at the box and picture online. It will tell you how it is easy to install.
Question:	Does this work for a bike with fenders
Answer:	I don’t see why not. The arm of the bike rack that touches the bike holds either on the top of the frame tube where your seat post goes in to or it’ll hold on directly on your seat tube. Either way would mean it’ll clear your bike fender.
Question:	Does it work on fat tire bikes
Answer:	It only fits the standard size tire. If your tire is fat, more than the size on the description then it will not fit your bike.
Question:	Will this stand work if the bike has a luggage rack
Answer:	i have a trek verve 3 disk (Med) with a rack. The vertical post of the rack has to go thru the rack (remove the top portion install the bike then re-insert the top section) before it will work. However, the post is not long enough. The bike must lean back just enough that its weight distribution will tilt the rack over.

Product features

Qualward Adjustable Upright Vertical Bicycle Stand

• Qualward lets you store your bike instantly in a space-saving handstand position, free up more valuable space and save floor space, great solution for limited indoor space, living room, bedroom, or garage, can be stored in corridors, balconies, warehouses, tool rooms or other places.
• Durable steel with powder coated finish,and Rubber Padded, preventing bikes from scratching or damaging walls, ceilings, cars, & more while you store.
• Lets you keep your bike inside, protected from bike thieves & other damage.
• Easy-to-use upright design means no more struggling to lift & hang heavy bikes to make room in your house.
• Installation manual included, and you can also watch the installation video.
• Don't need drilling, no damaging walls or ceilings. Screws and anchors included, store your bicycle quickly and easily.

Upright Design

• The Vertical cycling floor stand is designed to store a bike in your living room, bedroom or garage.

Movable Upright Rod

• Swingable (8° tilt）vertical rod that adjusts the support position and avoids getting stuck on the bicycle node.

Adjustable Height

• The height of the bike stand is 22.4”-30.3”.
• Adapts to different heights of mountain bikes, road bikes, children' s bicycles, etc.

Suitable Width & Rubber Padded

• Suitable for most bikes with the tires less than 2.4" in width.
• Prevent bikes from being scratched.

Product description

This pro-quality, versatile bike rack has a rock-solid base and is built to withstand years of use.When deciding on which product to carry we analyze many factors including: cost, stability, quality, etc.The RAD Cycle Product's exclusive design allows a secure base for awkward cycles and offers extreme portability--it can be assemble two different ways depending on the configuration you require.In our opinion these are much more robust and versatile than the inferior knock off versions you regularly see on the market and we back it up with a limited warranty. The Stand is simple to use and was designed with children in mind.It utilizes tubular steel construction with a durable finish that will give you many years of dependable service.

FEATURES:

• Easy to Install
• Floor Bike Stand
• Quickly Store 2 Bikes With Ease
• Bikes Can Be Stored In The Same Or Alternate Directions
• Easy For Children To Use
• Heavy Duty Tubular Steel Construction
• Durable Finish
• Weight 10 lbs.
• 1-year warranty

• ►HEAVY DUTY - Tubular steel construction makes this two bike rack one of the sturdiest bike racks on the market
• ►EASE OF USE - Quickly store 2 bikes with ease. No clamps, no brackets, no lifing. Just roll the bike into the rack and walk away
• ►VERSATILE - Bikes Can Be Stored In The Same Or Alternate Directions
• ►SIMPLICITY - So simple even children can use it without assistance. It doesn't get any easier than this.
• ►DURABLE FINISH - The gloss black powdercoated finish will protect your rack from the elements for years.

User questions & answers

Question:	Rad Cycle Mighty Rack Two Bike Floor Stand - what are the dimensions and weight please
Answer:	I measure 23" high x 24" wide x 21 inches deep. I can't really measure the weight. It pretty much stays put but it's not difficult to move.
Question:	can I use this in my suv trunk to keep the bikes uprights without falling during driving
Answer:	Definitely NOT. I transport 5 large cruiser style bicycles at a time inside my extended length minivan. 5 bikes fit inside, by alternating the handlebars forward-backwards-forward-backwards-forwards. This is only safe because the bikes are all tangled up with each other. Unless your rack INSIDE your vehicle has a secure locking clamp system (to keep the bikes from rolling back and forth when you hit the gas and brakes, or from falling over whenever you drive around a curve)...just like a good bike rack on the OUTSIDE of your vehicle should have, and unless the bike racks are bolted down to the floor of the vehicle, then you might as well forget trying to use any bike "stand" as a bike "rack" inside a moving vehicle.
Question:	can this stand be used outside
Answer:	I use mine on my travel trailer. It has been outside for a year. There are the startings of rust at some of the bolt connections. I suspect that after a few years in the FL weather I will be buying a new rack...which I am good with.
Question:	Will this fit my 29 inch mtn bike with disc brakes and 2 1/4 in. thick tires
Answer:	Not sure, I ride a canondale and my husband has a Trek hybrid. Ours fit facing opposite directions. The rack space is 2 3/4 inches for the tires. I do not know how the disc brakes would impact the fit. This rack is not the highest quality but was better then leaning our bikes against a wall.

Product features

RAD Cycle Products Mighty Rack Two Bike Floor Stand Bicycle Instant Park

This pro-quality, versatile bike rack has a rock-solid base and is built to withstand years of use.When deciding on which product to carry we analyze many factors including: cost, stability, quality, etc.The RAD Cycle Product's exclusive design allows a secure base for awkward cycles and offers extreme portability--it can be assemble two different ways depending on the configuration you require.In our opinion these are much more robust and versatile than the inferior knock off versions you regularly see on the market.

• 6-speed adjustment: With a simple twist at the handlebar-mounted cable-attached adjuster, you can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed.
• Color: black; Materials: steel, iron, PE plastic, magnet; Max. Load Capacity: 265lb / 120 kg ; Suitable for 26'' to 29'' and 700C wheels
• Make full use of what you already own: For cyclists who want to train uninterrupted by inclement or seasonal weather, this stationary bike stand is a practical and handy solution. With the cycling trainer, you can exercise at home with ease and leave those subjective or objective excuses behind.
• Protective levelness-adjustable feet caps: This magnet turbo trainer is secured by four non-slip feet caps, which prevents the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.
• Smooth & Silent: Noise reduction resistance wheel helps cut out the spinning sound and offers you a quiet exercising environment and a good way to avoid bothering others as well. Highly recommended for apartment/condo/shared space dwellers. The smooth resistance wheel is also protective to the wheel, extending the lifespan of your bicycle.

Product features

Specifications:

Materials: steel, iron, PE plastic, magnet

Unfolded overall dimension: 21.5 x 19.7 x 15.9’’ (WxDxH)

Folded overall dimension: 21.5 x 7.5 x 19.3’’ (W x Thickness x H)

Cable length: 7.7ft

Suitable for 26'' to 29'' and 700C wheels

Max. Load Capacity: 265 lb / 120 kg

N.W.: 17.4 lb / 7.9 kg

G.W.: 19.1 lb / 8.7 kg

Color: Black

NOTE:Our this product is suitable for wheels up to 29 ".If your outside diameter exceeds this range, please tell us before ordering to avoid unnecessary issues.

• 【Indoor Bike Trainers】: One of the problems with cycling, though, is that when the weather gets bad, conditions can keep you off the road or trail. Maybe it is raining or is too windy outside, or perhaps you need to avoid rush hour traffic or an unsafe dusk ride. This is when you just mount your bike on to a bike trainer and get the exercise that you want, but at home. There is no reason why you can not exercise with your bike when the outside weather is bad.
• 【Strong Structure & High Load-bearing Capacity】: The unfolded bicycle training stand forms a pyramid structure, which greatly improves the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 330 pounds. In addition, any bicycle with a wheel diameter of 26 ''to 28'' including 700c can be fitted to our stand.
• 【6 Level Resistance Adjustable】: The trainer includes a drive-by-wire device so that you can change the resistance from your handle bars directly. You can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed.
• 【Smooth & Low Noise Operation】: There is almost no sound on the wheels on the riding platform. It is recommended to replace smooth tires during cycling training to reduce vibration, reduce indoor resonance or add carpet under the stage. In some cases it will be loud with MTB tires. If you owned a MTB with rough tires, careful to buy. Because MTB tires will be loud with all bike trainers, no matter how expensive it is.
• 【Portable Folding Bike Exercise Stand】: In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. It just takes a minute to set it up, clamp your rear axle with the quick clamp and adjust the contact between the wheel and the polished roller. No need to use other tools, you can directly complete the installation and disassembly process by putting up or unfolding the stand.

User questions & answers

Question:	My bike has raised tread. Will this work and be quite in use of device
Answer:	It will work on the trainer, but not sure about the quiet part.
Question:	Will a rear axle that is 7.5 inches tip to tip fit this unit
Answer:	The trainer comes with its own axle that you replace your bike's axle with. You can leave it in all the time, or just when using the trainer. I put my original axle back on my bike when not using the trainer.
Question:	will a fat bike fit with 4.5 tires
Answer:	I’m don’t think so as my tires are 2.5 with only about .5 clearance on each side.
Question:	Does it come with from wheel rest
Answer:	dear customer：We 100% promise there are front wheel riser block inside the package, and there are also quick release skewer and all the tools needed for setup. You can see them in the second picture

Product features

DEUTER Bike Trainer (MT-04)

Indoor Bike Trainers

• In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. It just takes a minute to set it up, clamp your rear axle with the quick clamp and adjust the contact between the wheel and the polished roller.

• The unfolded bicycle training stand forms a pyramid structure, which greatly improves the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 330 pounds.

Product description

Features

1.Saving storage space when not use or to carry it into the car when cycling.

2.Dual Arm is better to hold heavy bike than Single Arm Stand.

3.Aluminum alloy material make the bicycle holder light ,only 3.5lbs.



Fit 20"-29" Wheel

20" - 24" Kids Bikes

26" to 29" Mountain Bikes

650c -700c Road Bikes

EXCEPT those bikes with the tires more than 2.4" in width.



Product Size

17.12(L) inch x3.74(H) inch x7.16(W)inch when folded

• 【Foldable & Save Space】:With One-Pull-Knob to fold the stand into a flat shape. SAVING STORAGE when not in use or to carry it into the car when going riding outside. Your bikes will never be lying on the ground or trees anymore.
• 【Quick & Easy Push In】: When you push your bike into stand, it will tilt. Effortless push in the rack, this patented design will be perfect hold your bicycle steady. Seconds Set-up and fold for compact storage to save space, no need tools to install
• 【Fit Multiple Tyre】: It is suitable for 650C -700C Road Bikes, 26"-29" Mountain Bikes and 20"-24" Kids Bikes.Perfect for almost all models of bicycles. Suit for own use home, garage,office and retail applications.
• 【Stong and Durable】: Dual arm is better to hold heavy bike than single arm stand. Aluminum alloy material make the bicycle holder light.
• 【Prevent Scratch】: : Delicate specification coating with engineering plastics on the corner to protect your bike from nicks and scratches. Spring-loaded arm easily hold front wheel without risk of scratching rim or spokes

• 🚲HIGH QUALITY-Heat-treated high quality steel is adopted for this bike floor stand for added strength,4 corners covered with rubber cap to avoid scratch ground,Wear-resisting and reduce noise.
• 🚲MULTIFUNCTION and SPACE SAVING-This indoor vertical bike rack is very convenient,not only suitable for front and back type insert,Also can store the bike vertically or horizontally to suit your storage needs.The bike stand lenght is 21.65”, the width is 20.86”, the height is 44.09”(After assembly). Perfect for an apartment, dorm room , a garage with WAY too much stuff in it or other limited space.
• 🚲NEAR FITS ALL BIKES-This vertical bike stand will fit almost All Bikes range from 20" - 24" Kids Bikes, 25" - 27" MOUNTAIN BIKES, 650C -700C ROAD BIKES, the wheelbase within 1140mm.EXCEPT those bikes with the tires more than 2.4" in width.
• 🚲EASY ASSEMBLY and Freestanding-This bike stands don't need drilling to design , don't worry to damage wall,You can Assemble it according to the instructions in 10 minuetes.It can be placed independently in any flat place(Include carpet).
• 🚲JAPUSOON PROMISE-We promise we will be responsible for all our customer and every order, please contact us for free,if you have any question about the product，we will try our best to help you sort it out.

User questions & answers

Question:	Is this vertical bike rack adjustable
Answer:	yes, our bike rack can be adjustable according your bike size
Question:	I have rear bike rack, will it fit on this
Answer:	I have a rear bike rack and it fits okay. You should be able to look at the upright picture of the bike on the bike stand and judge if your bike rack will work. From the picture you can see that if your bike rack was so long that it would extend past the rear tire then it would not work because it would be touching the floor.
Question:	Will it fall? I want to make sure it's sturdy enough
Answer:	It seems sturdy enough and it's has pretty good balance to it. Haven't had it fall yet.
Question:	I am assembling the bike rack and would like to know what the 10 small black spacers are for? The instructions do not even mention them
Answer:	I don’t have any spacers on mine that I’m aware of. I built it in two minutes.

Product features

Best Protecter for Your Bike

JAPUSOON VERTICAL BIKE STAND doesn't need drilling that will prevent your bike from damaging the floors, ceiling, or any wall in your apartment or home; It's the best indoor bike storage to keep your bicycles well protected from thieves or weather damage. (Please avoid place your uprigt bike rack outdoor to protect your bike and bike stand better.)

Best Spacing Servier

JAPUSOON UPRIGHT INDOOR BIKE RACK is a real space saver.it's a very good solution for people without a lot of space. Perfect for an apartment, dorm room or a garage with WAY too much stuff in it. And triangular stable structure is very safe to keep your bike never fall down.

Freestanding and Sturdy

Our JAPUSOON indoor bike rack is very easy to install, you just follow the instructions and install the four parts of the bike rack.You can use shim to reduce the gap between the screw and the bike stand.And tighten the screw with wrenches to avoid the bike stand wobble.No walls or ceilings needed to use this rack.It's very sturdy.

Triangular Stable Structure

Triangle stability means that the triangle has stability, stability, firmness and pressure resistance. JAPUSOON BIKE STAND has a bracket that forms a triangle with the base of the RACK,effectively enhances the stability of the frame. When the bike is pushed in, it protects the bike from ever tilting or falling.

Fis for 20''-27''

This vertical bike rack is designed to fit for 20"-27"mountain bikes, road bikes, women bikes, kids bikes and nearly all bikes , that the wheelbase within 1140mm. And It's easy to put the bike on this bike stand.

HOW TO ASSEMBLE?

• Install Rear Frame into Step-Bar with M6*30 screws.
• Install Front Frame into Step-Bar with M6*30 screws.
• Install Lower Arm to the side bracket on Front Frame with two M6*35 screws.

Product description

ZPARIK Brand is committed to providing customers with high quality products and services. We’re confident that you’ll love our bike repair stand,

just as much as we do. If you experience an issue with NOANTA product, feel free to contact us to refund or replace it. We'll appreciate it to learn

from your experience, and we’ll make it better



Package Includes:

--1 x Bike Repair Sstand

--1 x Install Instruction



Money Back Promise

We want you to be 100% satisfied about your purchase. If for any reason this product is not meeting your expectations, just send us a note and

we’ll be happy to take care of you.



Buy Now

ADD TO CART Now before we are out of stock!

• Bike Stand for Home Maintenance & Storage: The multi-use bicycle stands is designed for both bike stand and home floor parking rack. Also you can use it for simple bike maintenance. A good choice for mountain and road bike indoor storage
• Space Saving, Sturdy & Easy to Use: The repair rack structure is made of heavy duty steel which makes it sturdy, anti-deformation, and work with high bearing capacity. Simple, portable, durable, space saving and easy to use
• Adjustable Hooks, Anti-Scratch: There are 5 holes to insert the hooks to adjust the height of your bike. It will work perfectly with all type of bikes. The hooks are covered with soft rubber to prevent your bikes from being scratched
• Easy to Install with Basic Tools: The install instruction will show you how to install correctly step by step with free basic tools inside of the package
• Warranty: We offer 60-days money-back and 24-months warranty. We’re confident that you’ll love our barbell clamps just as much as we do. If you experience an issue, please feel free to contact us. We'll appreciate it to learn from your experience, and we’ll make it better

User questions & answers

Question:	Will a 45 pound E bike work on this? Thanks
Answer:	45 pound is ok to hold, just make sure your ebike has seat stay and chain stay like normal road bikes.

• Super Quiet Magnetic Technology: Bike Trainer Stand Built-In Super Noise Reduction Eliminates Whir, While Reduced Friction Extends the Life of Your Bike. (Note: The noise is mainly related to the materials and tread of bike tires. We highly suggest you to use road bikes.)
• Safe, Steady Construction: Bike Trainer Stand is Composed of Durable, Heavy Duty Stainless Steel & Includes a Front Wheel Riser Block & Anti-Slip Rubber Pads to Prevent Movement. It can be Connects in Seconds. No other Tools Required!
• 8 Levels Resistance Setting: Convenient Handle Bar Mounted Cable Controller Lets You Choose Your Incline From Flat to Steep. Simulate All Kinds of Roads, Hills & Mountain. Extra Wide Base & Low Stance Ensures Perfect Balance at Every Setting.
• Great Compability: The Indoor Bike Trainer Stand fits any road or mountain bike with a 24-28" or 700c wheel and with rear wheel axel between 4.92'-6.57". Max Load Capacity: 330 lb / 150 kg; Unfolded overall dimension: 24 x 19 x 20.5’’ / 61 x 48 x 52 cm (WxDxH); Folded overall dimension: 24 x 7 x 20.5’’ / 61 x 18 x 52 cm (WxDxH)
• 1 Year: Bike Trainer Stand offer customers 1 Year with professional customer service & technical support. If you are Satisfied with your purchase and services provided, please do spare some time to share with other customers. It will be much helpful !

User questions & answers

Question:	Are returns free if the stand does not work for you
Answer:	The product description indicates suitable for a 26 - 29” bike. I use with a 700x250 tires. Have not tried with my 27.5” MTB, yet.
Question:	Can i use the quick release skewer when i'm riding outdoors too
Answer:	Believe - YES
Question:	Hi, please, i would like to know if this equipment is for 28-inch mtb bicycles, thank you
Answer:	Depends upon if your 70’s Raleigh has a Quick Release axle. The bike stand includes a replacement QR axle (can be installed easily) appropriate for the stand. My 2017 Specialized Allez fit better with their axle vs, my bikes original equipment. Good luck.
Question:	I have a bike with 26" wheels. will the drmois trainer work with my bike
Answer:	I only have this one and very satisfied.

Product features

DRMOIS BIKE TRAINER STAND STEEL BICYCLE EXERCISE MAGNETIC STAND WITH NOISE REDUCTION WHEEL. WHY CHOOSE DRMOIS AMERICA BIKE TRAINER STAND?

Enjoy a perfect indoor exciting sport relaxation with this Bike Trainer Stand at DRMOIS. We create your Home Bikes to help you always enjoy your training program even if the storm or heavy rain outdoor!

DRMOIS Team always put customers first and continues to strive to provide the best service !

Welcome to DRMOIS Store !

PACKAGE

1 x Indoor Bike Trainer Stand

1 x Front Wheel Riser

1 x Adjustable Resistance Shifter

1 x Quick-Release Skewer

1 x Instructions

Great Load Capacity: 330 lb / 150 kg

DRMOIS AMERICA Bike Trainer Stand have thick high-carbon with great load-bearing steel. The Load Capacity: 330 lb / 150 kg.

Fits 24-28”or 700c Wheel

The DRMOIS magnetic bicycle exercise trainer stand can be used with 24-28" or 700C wheels, and bikes with a back wheel axle length between 4.92-6.57"; road bikes are recommended over mountain bikes as they generate less noise due to their tires and tread.

8 Adjustable Resistance Levels

Levels1-2: Simulates downhill riding; Levels3-5: Simulates flat road riding; Levels6-8: Simulates slope riding.

Smooth Spinning Action

DRMOIS Bike Trainer Stand Built-in Super Noise Reduction eliminates whir, while reduced friction extends the life of Your bike.

Portable Design

The DRMOIS Bike Trainer can be folded to reduce the occupied space, and can be placed in the trunk of the car for easy movement.

Easy to Assemble, Easy to Use

Hit the Adjustable Handle clamp to easily release and remove your ride. The DRMOIS Indoor Bike Trainer Stand can be assembled and disassembled in just a few minutes.