13 best bike lift for indoor cycling

Product description

BalanceFrom Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand with Front Wheel Riser Block, Black.

• Noise (important) - there will be load noise when working with rough tires. Quite when working with road bike tires
• Works on any surface - Simulates real cycling feel, rubber feet will prevent scratching wood floor. Built with a wide base and low stance for unshakable balance. Max load 330 lbs.
• Easy to install and release - install process is easy. Quick release clamp helps clamps your rear wheel tightly. It also helps to take the bike down much easier than other bike trainers
• 8 resistance settings - 8 levels magnetic resistances meet your specific needs about resistance & speed; handle bar mounted resistance controller easily lets you adjust resistance
• Wide compatibility - balance From bike trainer stand Fits any road or mountain bike with a 26-28" Or 700C wheel

User questions & answers

Question:	Can this be used on a bike with no gears
Answer:	I think so. The 9 yr old should have no problem, and i doubt the 6 yr old would either. The arm that holds the wheel dosent have alot of tension. It moves quite easily. I think its used more as a guide for the wheel. I really like the product and would recomend it.
Question:	Can you use this with a BMX bike
Answer:	I'd have to agree with previous answer. You could definitely make the rack steady in the bed but with just one wheel sitting in the cradle and no straps for either wheel I wouldn't advise it.
Question:	Can i use this on my bike without qr axel? i just have bolts on each side of my mountain bike
Answer:	15" x 19" x 6" when folded
Question:	My kit was missing the front wheel riser that is shown in the image and listed as part of the product. Where can I obtain it
Answer:	front tire or rear tire off the floor only. not the whole bike.

Product features

BalanceFrom Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand

About noise, our bike trainer featured noise reduction technology, will be super quiet with road bike tires, and all bike trainer will be loud with rough tires. Such as mountain bike tires. To solve this problem you can search (slick tire). And replace your rear outer tire with slick tires, it will be quiet.

Works On Any Surface

Simulates real cycling feel, rubber feet will prevent scratching wood floor. Built with a wide base and low stance balance. Max load 330 lbs.

8 Resistance Settings

8 levels magnetic resistances meet your specific needs; handle bar mounted resistance controller easily lets you adjust resistance.

Easy To Install And Release

Install process is easy. Quick release clamp helps clamps your rear wheel tightly. It also helps to take the bike down much easier.

• Stability On Any Surface: Built with a wide base and low stance for unshakable balance. Features 5 adjustable antislip rubber feet to even out any uneven flooring
• Spin In Silence: Smooth, seamless design and noise reduction resistance wheel mean you there’s no need to amp up the volume when you build up the burn (Note: The noise is mainly related to the materials and tread of bike tires. We highly suggest you to use road bikes because the noise will be louder if MTB is used.)
• 6 Resistance Settings: Train to your standards with bar-mounted remote and wide range resistance curve to simulate all cycling conditions
• Easy Bike Release: Ready to head outside? Just hit the press-down lever clamp to easily release and remove your ride. Front wheel riser block and rear quick release lever are included for quick installation.
• Great Compability:The Indoor Bike Trainer Stand fits any road or mountain bike with a 26-28" or 700c wheel and with rear wheel axel between 4.92'-6.57"

Product features

Sportneer Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand with Noise Reduction Wheel

Silky-smooth Spinning

Our specialized noise-reduction wheel will make your workouts as quiet and can be. Better still, the reduced friction design prolongs the life of your bike tires for maximum riding time.

The stationary bike stand's noise reduction resistance wheel works to reduce the hum generated by your spinning rear wheel, so you won't have to pound out the jams and whirr the house down just to get some tunes going while you ride- much to the relief of your girlfriend, dog, and disgruntled neighbors. Also, the smoother resistance wheel can prolong the lifespan of your bicycle.

Easy to Assemble, Easy to Use

Ready to head outside?

Just hit the press-down lever clamp to easily release and remove your ride.

Short on time? No Problem.

The Sportneer Indoor Bike Trainer Stand can be assembled and disassembled in just a few short minutes. Just lock your bike in place, set your ideal resistance, and get pedaling!

Great Compability

This Indoor Bike Trainer Stand fits any road or mountain bike with a 26-28" or 700c wheel, and with rear wheel axel between 4.92'-6.57"

Adjustable Rubber Feet

Thanks to 5 level adjustable anti-slip rubber feet, this bike trainer can keep balance on uneven floor

Keep Your Bike Ready

Front wheel block and quick-release lever were included

Extreme Portability

Super tiny size for daily use and easy storage

Extended size: 22"x22"x15.5"

Folded size: 21.3" x 7.9" x 25.2"

• Max. Load Capacity: 265 lb / 120 kg; Suitable for 26'' to 28'' and 700C wheels;Unfolded overall dimension: 21.5 x 23.8 x 14.8’’ / 54.5 x 60.5 x 37.5 cm (WxDxH); Folded overall dimension: 21.5 x 7 x 17.3’’ / 54.5 x 18 x 44 cm (W x Thickness x H)
• Protective levelness-adjustable feet caps: This magnet turbo trainer is secured by four non-slip feet caps, to prevent the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.
• Smooth operation: This low-noise magnetic turbo gives you a quiet exercise environment. Please note that the noise/friction sound comes from the friction between the wheels and the trainer. Our indoor bike trainer itself doesn’t contain any noise-causing parts.
• Why an indoor bike trainer: When the bad weather tries to stop your cycling training, or somehow you just don’t feel like leaving the house and driving to the studio to get in your daily spin classes, then the indoor bike trainer is a handy and practical solution to your worries. With the cycling trainer, you can exercise at home with ease and leave those subjective or objective excuses behind.
• Use Tips: This bike trainer is designed for bikes with quick-release axles. Thru-axle adapters (not included) are needed for thru-axle bikes. For reducing humming sound, we recommend equipping your bike with slick tires and using the bike trainer on a carpet.

User questions & answers

Question:	Does it come with the front wheel riser
Answer:	Magnetic Bike Bicycle Trainer Indoor Stationary Exercise Stand Steel Frame Our indoor bike trainer is constructed of quality magnet, corrosion-resistant alloy roller, and powder coated high carbon steel stand, with the ability to support up to 264.6lb. It features a sturdy mounting system and comes with a quick-release skewer for the rear wheel hub and front-wheel support to stability and safety. This turbo trainer fits for 26'' to 28'' and 700C wheel sizes. Also, its foldable design makes it easy to store and carry. Note: The noise is mainly related to the materials and tread of bike tires. The use of road bikes is highly suggested because the spinning sound will be louder if mountain bike is used. We also recommend using the bike trainer on a carpet to reduce noise. Materials: aluminum alloy, iron, plastic, magnet; Package included: 1 x Bike Trainer; 1 x Front wheel riser block; 1 x Rear wheel skewer; 1 x Instruction
Question:	Can u adjust resistance by shifting the gears on the bike
Answer:	Not very well but somewhat. Mostly you have to tighten and adjust the roller on the rear wheel. I have 18 gears but had it on the front middle chain ring. When next I ride on the ground, I will make sure I put it on the biggest ring. I can't get the front shifter to work because there isn't enough torque. My rear shifter does work but isn't enough to increase the resistance very much. It could work differently on your bike. PS. The directions are very poor and it was not clear how to lock down the wheel stand. My bike fell off the first time I used it. Upon further examination and analysis, I found the plastic rings that you slide toward the hub to lock the things that screw in. Now it works fine. The directions have almost no words and very blurry, smallish photos.
Question:	How can i adjust resistance
Answer:	Two ways. Tightening the wheel against the turbine and by gearing down.
Question:	I am looking for one that comes with a front wheel riser..some are saying this model comes with one some are saying it doesnt What does the Co. say
Answer:	I just received my bike trainer. It does come with a front wheel riser, but it is a hard plastic one and not very good. I ordered a rubbery one via another company for about $8 that works great and I am very happy with.

Product features

Magnetic Bike Bicycle Trainer Indoor Stationary Exercise Stand Steel Frame

Our indoor bike trainer is constructed of quality magnet, corrosion-resistant alloy roller, and powder coated high carbon steel stand, with the ability to support up to 264.6lb. It features a sturdy mounting system and comes with a quick-release skewer for the rear wheel hub and front-wheel support to stability and safety. This turbo trainer fits for 26'' to 28'' and 700C wheel sizes. Also, its foldable design makes it easy to store and carry.

Note: The noise is mainly related to the materials and tread of bike tires. At least half of the noise comes from the bike itself. Such factors that contribute to the noise are how well your bike has been tuned (alignment and lubrication of front and rear derailleurs, cassettes, chain, gears, hubs) as well as your bikes tires.The use of road bikes is highly suggested because the spinning sound will be louder and it possible to wear out the tires if mountain bike is used. We also recommend using the bike trainer on a carpet to reduce noise.

Note:

Although the mounting system can be compatible with most quick release skewers, we recommend replacing the original quick release skewer with ours to reduce risk of damage. Furthermore, our quick release skewer is also functional in the daily use of bike, so the replacement can also spare you from changing the quick release skewers too often.

Product description

"

Turn your bike into an indoor exercise bike! Rain, snow and inclement weather is no excuse anymore! With the Bike Lane Trainer by Bike Lane Products stay riding anytime you want, all year round. Train safely, away from high traffic areas. The wide base design gives extra stability and a smooth, quiet ride. For the beginner to the training professional, this product is perfect for year round fitness. Features:State of the art technology. As soon as you begin to pedal, the strong internal magnet creates resistance. Extremely Portable. The Bike Lane Trainer is extremely light. and it can folded for travel and storage. Maximum Stability. The Bike Lane Trainer features extra wide legs and a sturdy frame makes this the trainer the pros choose. Extra Durable. The Bike Lane Trainer features the finest materials and proven reliability. We stand behind every product we sell and back it up with a 100% satisfaction guarantee.

Additional Features:

• Designed for bikes with quick release rear axle.
• Features separated legs for added stability.
• Includes an 850 gram machined steel flywheel for the most natural pedal feel.
• Quick release foot pedal system always keeps same tire pressure.
• Includes a quick release skewer. Fits 700c (Road) or 26 in. (Mountain) wheels with different tire sizes.
• Folds for easy storage.
• See photos.
• Dimensions: 15"" x 18.75"" x 21.5"".
• Weight Limit: 275 Pounds
• Riser Block NOT Included.

"

• ►STATE OF THE ART - State of the art technology: As soon as you begin to pedal, the ultra QUIET internal magnet creates resistance. You can easily increase the resistance by shifting the gears on your bike!
• ►EXTREMELY PORTABLE - The MAG Trainer is extremely light and it can be folded down like an ironing board for travel and storage. Take it anywhere, train indoors all Winter long
• ►MAXIMUM STABILITY - This trainer is one of the most robust and sturdy trainers on the market. Extra wide legs and a sturdy frame makes this the trainer the pros choose
• ►EXTRA DURABLE - This trainer features the finest materials and proven reliability. These are perfect for the beginner or the professional who wants to stay in shape all year long
• ►VERSATILE - Turn your bike into an indoor exercise bike, easy set-up and quiet operation. Accommodates 26-28" and 700cc tires. Designed for bikes with quick release rear axle.

User questions & answers

Question:	Do i need to change the axle
Answer:	You do need to have a quick release axle and this product comes with a skewer to swap out when you are using the trainer.
Question:	It work with mountainbike 29 wheels
Answer:	No, our trainers are designed to work with a 26" - 28" and 700cc wheel.
Question:	Can you use the bicycle stand with a folding Dahon bike
Answer:	This trainer is for a bike with a quick release rear axle. This trainer fits 700c or 26in wheels. If you Dahon bike fits those specs then it will work.
Question:	Will this work with a regular bike
Answer:	We have a regular adult bike and it works just fine. It's a little noisy but it does the job!

Product features

Bike Lane Trainer Bicycle Indoor Trainer Exercise Machine With 850 Gram Flywheel

Turn your bike into an indoor exercise bike! Rain, snow and inclement weather is no excuse anymore! With the Bike Lane Trainer by Bike Lane Products stay riding anytime you want, all year round. Train safely, away from high traffic areas. The wide base design gives extra stability and a smooth, quiet ride. For the beginner to the training professional, this product is perfect for year round fitness. Features:State of the art technology. As soon as you begin to pedal, the strong internal magnet creates resistance. Extremely Portable. The Bike Lane Trainer is extremely light. and it can folded for travel and storage.

• SAFE & STABLE - Equipped with a wide, sturdy base and low stance for keeping balance, the Bike Trainer Stand is stable enough to lift and upload most bikes; A necessary tool for all bikes enthusiasts
• EXCELLENT DESIGN - There are 6 adjustable gears for your choice; Features anti-slip rubber feet, it can suitable for different ground; The wheels are quite, smooth when running, which means there is no disturbing noise and extend the life of the bike
• PREMIUM MATERIALS - Made of a high-quality steelpipe coated and will not rust and is easy for people to carry and use; The stand is made from heavy-duty durable stainless steel and ensures its capacity
• USE AT HOME - Without the limitation of bad weather or uneven ground, change the mountain or road bike into a stable, speed-adjustable indoor exercise; You are allowed to practice at any time for fitness, practice or hobby
• EASY OPERATION - Easy to assemble and convenient to use, with adjustable resistance and an easy quick-release lever, you can change the incline setting without leaving the seat; It is a necessary, effective tool for your healthy life

User questions & answers

Question:	Boost axle (12x148) compatible? And what is the Max tire with 2.3,2.5,2.6 etc? Thanks
Answer:	Really don’t know that question? Check manufacturing items listed on page.
Question:	Does a 700 wheel fit on this unit
Answer:	yes
Question:	Wheel size accepted: Does it fit all bikes or just a specific wheel diameter
Answer:	Dear Customer, Thank you for your message. This bike stand is compatible with 26”-29” wheels Please do not hesitate to contact us if you have any other questions. Best wishes, VIVOHOME Customer Care
Question:	I am trying to use with a mountain bike; tires are fine but I cannot get the bike to fit the frame. How do you keep the bike from slipping off
Answer:	You’ve got to unscrew left side of frame to adjust to back screws of bike and adjust frame to fit back tire of bike

Product features

VIVOHOME Portable Indoor Bike Trainer Stand

With the VIVOHOME Bike Trainer Stand, you can ride the bike at home at any time without the limitation of bad weather or uneven ground, which helps you to foster the good habit and keep the healthy lifestyle. Features adjustable resistance and an easy quick-release lever, you can change the incline setting without leaving the seat.

More About The Product

Product Specification:

• Material: steelpipe coated plastic
• Fits to bike: Diameter of tire ranges from 34" to 38"
• Maximum Loadling Weight: 260 lbs
• Function: Magnetic resistance and 6 adjustable gears
• Product Dimension (unfold): 19.6*21.4*15.7 inch
• Product Weight: 18.07 lbs
• Accessory List: 1* cycling stand, 1* release lever, 1* front car fixed seat, 1* polyester fabric bag, 1* manual

Quiet Design

Equipped with noise-reduction design, the wheels are quite, smooth when running. No worry about disturbing others.

Adjustable Setting

Features adjustable resistance and an easy quick-release lever, you can change the incline setting without leaving the seat.

Use at Home

Without the limitation of bad weather or uneven ground, you can ride the bike at home at any time for fitness, practice or hobby.

• MAKE THE SWITCH TO STATIONARY! – Mag Bike Stand Converts Any Mountain or Road Bike Into a Stable, Smooth-Riding Indoor Stationary Bicycle for All-Season Training, Conditioning, Fitness & Exercise – A Must-Have for Dedicated Cyclists!
• SUPER QUIET MAGNETIC TECHNOLOGY – High-Quality Flywheel Mechanism Creates Drag Against Tire to Replicate Real Cycling Experience – Built-In Super Noise Reduction Eliminates Whir, While Reduced Friction Extends the Life of Your Bike
• 6 LEVELS OF FIXED RESISTANCE – Convenient Handle Bar Mounted Cable Controller Lets You Choose Your Incline From Flat to Steep – Simulate All Kinds of Hills, Roads & Intervals – Extra Wide Base & Low Stance Ensures Perfect Balance at Every Setting
• SAFE, STEADY CONSTRUCTION – Stand is Composed of Durable, Heavy Duty Stainless Steel & Includes a Front Wheel Riser Block & Anti-Slip Rubber Pads to Prevent Movement – Connects in Seconds & Releases Via Quick Lever—No Tools Required!
• FOLDABLE FRAME FOR EASY TRAVEL – Portable Stand is Hard-Wearing Yet Lightweight & Compact So You Can Fold, Pack & Go – Kit Comes w/ FREE Sturdy Bag for Effortless Carrying & Storage – Compatible w/ Most 26-28 In & 700c Wheels

User questions & answers

Question:	instructions say if your bike has a bolt you dont have to remove the skewer. what does tjat mean? how do i tell if it has a bolt
Answer:	Hi, If the Bikes Rear Wheel has a Removable Bolt which Holds the Wheels in Place than the Trainer will work Perfectly. But if the Bold is not easy to remove you will need to replace it with the Included Quick-Release Skewer.
Question:	Does it have a weight limited
Answer:	This Heavy Duty Bike Trainer Stand has Can Hold an Unlimited Amount of Weight!
Question:	What minimum and maximum axle widths are supported
Answer:	I have this question too, and everyone seems to think they have the answer, but so far all I've seen is a lack of understanding of the different types of axles out there. Just so everyone is aware, NOT ALL bikes can use a QR (quick release) skewer. Many modern bikes can only use a threaded thru-axle. With past trainers, I've had good success using axles from the Robert Axle project and the Traxle from Kinetic. Many new bikes use hubs that are wider than they used to be. So Alpcour...can you please directly answer this question? : Can you use a bike with a 12x142 rear thru-axle with this stand? I understand that I will have to replace the axle on my bike. But the key question is if the dimensions are large enough to fit a bike with that axle width. Most trainers like this are NOT wide enough. Can you please clarify?
Question:	Can anyone explain what the black powdery substance that fell onto the floor under the rear wheel is from
Answer:	Make sure to rotate your tires when using a trainer, since it can cause uneven wear if you don’t.

Product description

Description

Are you still unable to satisfy the cycling exercise due to the limited space? I highly recommend our bike training frame to you!

This indoor steel bicycle stand is made of solid steel and adopts pyramid structure design to ensure its stability. Nylon material can effectively protect the floor and increase the friction of the bicycle training frame so that it does not shake at will. Besides, our bike training frame suitable for 26'', 27'' and 28'' tires. What's more, folding design makes it easy to store without occupying a large space. In addition, our training car is light and compact enough for you to carry it anywhere. Come on, enjoy the convenience and comfort brought by sports.



Features

High-quality steel provides high durability and long service life

Pyramid structure makes the stand firmly on the ground

Nylon material increases friction without damaging the floor

A good load-bearing for maximum load capacity 220 lbs

Lightweight design and compact size make it easy to carry and store

Suitable for 26, 27, and 28 inch tires and a variety of bike types

Front wheel pad keeps bicycle stable and ensure user’s safety

Detailed instructions help you complete the installation easily

Noise reduction function provides a quiet environment for you and your neighbors



Specifications

Color: Black

Material: Steel + Nylon

Product Size: 23.5’’ x 21’’ x 15.5’’ (L x W x H)

Folding Size: 21’’ x 18.5’’ x 8.5’’ (L x W x H)

Net Weight: 17.5 lbs

Weight Capacity: 220 lbs

Suitable Bike Wheel Size: 26’’ - 28’’

Package includes：

1 x Bike Trainer Stand

• 🚴『Quick Release & Double Locking System』The built-in double locking system can firmly fix the bicycle on the rack to ensure the safety of the exerciser during the exercise and reduce potential hidden dangers. In addition, you can easily remove the quick release lever and install the bicycle by turning the knob.
• 🚴『Smooth & Low Noise Operation』You can easily adjust the optimal distance between the flywheel and the wheels so that the wheels can run more smoothly. Therefore, whether you are exercising in an apartment, shared room or shared space, you will not disturb your family or neighbors.
• 🚴『Portable Folding Bike Exercise Stand』In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. No need to use other tools, you can directly complete the installation and disassembly process by putting up or unfolding the stand. And it can be placed into any narrow place in your room or car.
• 🚴『Strong Structure & High Load-bearing Capacity』The unfolded bicycle training stand forms a pyramid structure, which greatly improves the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 220 pounds. In addition, any bicycle with a wheel diameter of 26 "to 28" can be fitted to our stand.
• 🚴『Premium & Durable Material』High-quality steel provides high durability and long service life. And the non-slip foot pads are made of nylon material, which can increase the friction and protect the floor from scratches. Besides, you can rotate the mat to adjust the balance of the bike exercise stand.

User questions & answers

Question:	Does this have resistance settings
Answer:	You kind of just... Tigthen the bolt at the bottom to increase resistance. It's very analogue, but get's the job done. Not bad for a low-cost gadget.
Question:	Can one easily adjust resistance
Answer:	Yes. Just turn the knob in back
Question:	will this work with a 26" mountain bike
Answer:	Yes it does. I actually use it with a 26” bike. Works great.
Question:	Se puede utilizar para bicicleta de montaña
Answer:	Si

• ✿『EASY TO ASSEMBLE』 Our bike trainer with only a small amount of spare parts. According to our instructions, you can finish the dirty combination of the bike trainer stand in 15 minutes and start your workout. We suggest that you use the bicycle trainers in a more open area.bike trainer bike trainer stand bicycle trainers.
• ✿『FIVE RESISTANCE SETTING』 Our bike trainer can adjust to five resistance levels. When you reach one level, you feel like riding on a flat ground. When you adjust bike trainer stand resistance to three levels, you will experience something like riding on the sand. If you have confidence in yourself, you can set the bicycle trainers resistance level to five. It's like climbing a slope. bicycle trainers road bike trainer indoor bike trainer.
• ✿『EASY TO CARRY AND STORE』 It doesn't take up much space to carry and place our bike trainer. You can fold it up and put it in the car's trunk easily. You can also place the bike trainer stand in a corner of the room. When you want to use it, just take the bicycle trainers out and start exercising. Of course, first you have to have a bike.bike trainer indoor bike trainer road bike trainer.
• ✿『SUPER MUTE』 If you want to make sure that you don't disturb others while exercising, then our bike trainer is a good choice for you. When you use the bike trainer stand and set the first resistance, the sound will not exceed 60 decibels. Of course, the higher the resistance you set, the lower the noise you will make. If you set the 5 levels ,and bicycle trainers still makes a lot of noise, so that means you are too strong.bike trainer stand bicycle trainers indoor bike trainer.
• ✿『QUALITY ASSURANCE』 Our bike trainer is made of high quality carbon steel and can guarantee at least 300 pounds of weight. We guarantee that you will like our bike trainer stand. If any quality problems occur on our bicycle trainers, please contact us.bike trainer indoor bike trainer bicycle trainers.

• plastic
• Imported
• It's a simple molded plastic stand for front wheel when in a static stand for bike workouts
• This bike riser block keeps your bicycle's front tire in place and raises the front just enough that you will not be sliding off your seat while pedaling.
• Internal design guarantees maximum wheel stability
• Anti-slip feet stay in place and eliminate handlebar vibrations
• Suitable for 95% size of road and moutain bikes/bicycles except Beach Cruiser.If you want to need Trainer Skewer, the item can be easily found by searching for the serial number: "B089NVTC2V"

User questions & answers

Question:	Will these fit a 700X23 road bike tire
Answer:	Yes,the bike riser blck fit for it
Question:	How high off the ground does this raise the front wheel
Answer:	Roughly a couple inches. Wood planks work well under it to add height.
Question:	Does it work for MTB
Answer:	works good on my bike tire size 26x2.125
Question:	How high off the ground does this raise the front wheel
Answer:	About 1.5 to 2 inches, high enough to use with a bike trainer.

• Functional home gym accessory: This fluid bike trainer fits for 26'' to 28'' and 700C wheels, and comes with a quick release skewer, so it requires a bike with a rear quick release wheel. Great for indoor cycling training, also an ideal gift for bicycle lover.
• Low-noise training stand: Compared with the magnetic trainer, fluid trainers are noticeably quieter, which is a highlight for apartment/condo/shared space dwellers.
• Simulated outdoor cycling: The fluid-impelled flywheel mechanism makes sure that the ride provided by a fluid trainer is more road-like in feel. Because the faster you ride, the higher the temperature inside will cause, and thicker the fluid will be, which means the trainer’s resistance becomes progressively more challenging.
• Sturdy metal construction: Constructed of aluminum fluid resistor, and strong and hard high carbon steel stand with the ability to support up to 265 lb / 120kg,our indoor fluid bicycle trainer provides you with the most secure bicycle training method.
• Unfolded overall dimension: 21.5 x 24.5 x 16’’ / 54.5 x 62 x 40.5 cm (WxDxH); Folded overall dimension: 21.5 x 8.5 x 19’’ / 54.5 x 21.5 x 48.5 cm(W x Thickness x H)

User questions & answers

Question:	Does this trainer work with bolt-on axle? What's the return policy if the trainer doesn't fit
Answer:	Please be more descriptive re "bolt-on axle." Thanks, Tom
Question:	What is the warranty on this Fluid Trainer
Answer:	Although we don’t have warranty card in the package, we will be responsible for all problems of this Fluid bike trainer as long as used correctly.
Question:	Will it fit my Specialized Rockhopper mountain bike
Answer:	Why would it not? The Yaheetech Fluid Trainer drives the rear-wheel of a bicycle. It specifies 26" - 28" as well as 700C wheels. That accomodates a very long list. Take a look at your Specialize's specs--do they fall within that range? My only question re fit would be whether the YFD would accomodate the disc brake, but I think I remember an affirmative to that question when I was looking at specs prior to my own purchase several months ago. So, I think, yes--but I can't be sure. The YFBT is a simple (read--accomodating to general use) device, but, then you have recourse to Amazon's return policy provided you can act quickly. Good luck, Chuck M
Question:	Hay productos de estos para bicicletas de niños de 20 pulgadas a 24 pulgadas? Por la pandemia ponerlos a activarse
Answer:	Sorry to tell you that we do not sell for the fluid bike trainer fit for 20'' to 24'', hope this will help you.

Product features

Specifications:

Materials: steel, aluminum, PE plastic;

Unfolded overall dimension: 21.5 x 24.5 x 16’’ (WxDxH);(Contains Fluid Flywheel)

Folded overall dimension: 21.5 x 8.5 x 19’’ (W x Thickness x H);(Contains Fluid Flywheel)

Suitable for 26'' to 28'' and 700C wheels;

Max. load capacity: 265 lb / 120 kg

G.W.: 22.2 lb / 10.1 kg;

Color: black

• ✿『EASY TO ASSEMBLE』 Our bike trainer with only a small amount of spare parts. According to our instructions, you can finish the dirty combination of the bike trainer stand in 15 minutes and start your workout. We suggest that you use the bicycle trainers in a more open area.bike trainer bike trainer stand bicycle trainers.
• ✿『FIVE RESISTANCE SETTING』 Our bike trainer can adjust to five resistance levels. When you reach one level, you feel like riding on a flat ground. When you adjust bike trainer stand resistance to three levels, you will experience something like riding on the sand. If you have confidence in yourself, you can set the bicycle trainers resistance level to five. It's like climbing a slope. bicycle trainers road bike trainer indoor bike trainer.
• ✿『EASY TO CARRY AND STORE』 It doesn't take up much space to carry and place our bike trainer. You can fold it up and put it in the car's trunk easily. You can also place the bike trainer stand in a corner of the room. When you want to use it, just take the bicycle trainers out and start exercising. Of course, first you have to have a bike.bike trainer indoor bike trainer road bike trainer.
• ✿『SUPER MUTE』 If you want to make sure that you don't disturb others while exercising, then our bike trainer is a good choice for you. When you use the bike trainer stand and set the first resistance, the sound will not exceed 60 decibels. Of course, the higher the resistance you set, the lower the noise you will make. If you set the 5 levels ,and bicycle trainers still makes a lot of noise, so that means you are too strong.bike trainer stand bicycle trainers indoor bike trainer.
• ✿『QUALITY ASSURANCE』 Our bike trainer is made of high quality carbon steel and can guarantee at least 300 pounds of weight. We guarantee that you will like our bike trainer stand. If any quality problems occur on our bicycle trainers, please contact us.bike trainer indoor bike trainer bicycle trainers.

Product description

Rain, snow and inclement weather is no excuse anymore! With the Bike Lane Pro Trainer by Bike Lane Products stay riding anytime you want, all year round. Train safely, away from high traffic areas. The easy change resistance controller allows you to choose your training with up to 5 levels of resistance. The wide base design gives extra stability and a smooth, quiet ride. For the beginner to the training professional, this product is perfect for year round fitness.

Features:

• State of the art technology.
  
  As soon as you begin to pedal, the strong internal magnet creates resistance.
• Extremely Portable.
  
  The Bike Lane Trainer is extremely light. and it can folded for travel and storage.
• Maximum Stability.
  
  The Bike Lane Trainer features extra wide legs and a sturdy frame makes this the trainer the pros choose.
• Extra Durable.
  
  The Bike Lane Trainer features the finest materials and proven reliability. We stand behind every product we sell and back it up with a 100% satisfaction guarantee.

Additional Features:

• Designed for bikes with quick release rear axle.
• Adjustable foot pads for uneven flooring.
• 5 powerful magnetic resistance levels simulate road conditions.
• Features separated legs for added stability.
• Includes a machined steel flywheel for the most natural pedal feel.
• Includes a quick release skewer.
• Fits 700c or 27 in. (Road) or 26 in.(Mountain) wheels with different tire sizes.
• Folds for easy storage. See photos.
• Dimensions: 15.75" x 18.5" x 21.5"
• Riser Block Included.

• ►STATE OF THE ART - As soon as you begin to pedal, the ultra QUIET internal magnet creates resistance. You can easily increase the resistance by shifting the gears on your bike!
• ►EXTREMELY PORTABLE - The PRO Trainer is extremely light and it can be folded down like an ironing board for travel and storage
• ►MAXIMUM STABILITY - One of the most robust and sturdy stands on the market. Extra wide legs and a sturdy frame makes this the trainer the pros choose
• ►EXTRA DURABLE - features the finest materials and proven reliability. We stand behind every product we sell and back it up with a 100% satisfaction guarantee
• ►VERSATILITY - Turn your bike into an indoor exercise bike, easy set-up and quiet operation, riser block included.

User questions & answers

Question:	What about the shipping, how long it takes to arrive once you buy it
Answer:	It's not difficult at all. The bike is held in place by threaded bolts that screw in from either side at the bike's axle. The fitting where it attaches to the axle, (it fits snugly over the nut) is good and sturdy, and the other ends have large plastic grips. The threads are large enough as to not make it hard to turn but small enough to allow for a good, tight fit.
Question:	Does it work with mountanbike 29 wheels
Answer:	Yep. I'm using mountain bike type wheels/tires.
Question:	does it include riser
Answer:	i just looked at my bike set-up and i think it's going to be a little small. My bike is set up on it right now but I think you have about 8 inches of leeway, or 203 mm. There are a couple threads on the screws unaccounted for, but that's going to be a really tight fit. WHAT are you riding??? :)
Question:	Will this work with 650 wheel set
Answer:	There has a resistance, but is is not adjustable.

• 6-speed adjustment: With a simple twist at the handlebar-mounted cable-attached adjuster, you can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed.
• Color: black; Materials: steel, iron, PE plastic, magnet; Max. Load Capacity: 265lb / 120 kg ; Suitable for 26'' to 29'' and 700C wheels
• Make full use of what you already own: For cyclists who want to train uninterrupted by inclement or seasonal weather, this stationary bike stand is a practical and handy solution. With the cycling trainer, you can exercise at home with ease and leave those subjective or objective excuses behind.
• Protective levelness-adjustable feet caps: This magnet turbo trainer is secured by four non-slip feet caps, which prevents the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.
• Smooth & Silent: Noise reduction resistance wheel helps cut out the spinning sound and offers you a quiet exercising environment and a good way to avoid bothering others as well. Highly recommended for apartment/condo/shared space dwellers. The smooth resistance wheel is also protective to the wheel, extending the lifespan of your bicycle.

Product features

Specifications:

Materials: steel, iron, PE plastic, magnet

Unfolded overall dimension: 21.5 x 19.7 x 15.9’’ (WxDxH)

Folded overall dimension: 21.5 x 7.5 x 19.3’’ (W x Thickness x H)

Cable length: 7.7ft

Suitable for 26'' to 29'' and 700C wheels

Max. Load Capacity: 265 lb / 120 kg

N.W.: 17.4 lb / 7.9 kg

G.W.: 19.1 lb / 8.7 kg

Color: Black

NOTE:Our this product is suitable for wheels up to 29 ".If your outside diameter exceeds this range, please tell us before ordering to avoid unnecessary issues.