14 best bike indoor training stand

• STABLE & SOLID: Heavy duty construction,solid wide frame for extra stability and max load 135kg/ 298lbs.High strength aluminium steel keep your training more stable and safer,enjoy your indoor exercise
• QUIET & SMOOTH: ROCKBROS indoor bicycle trainer has upgraded the magnetic wheel, would be quiet and smooth with road bike tires and slick tires(it would be better to change a slick tire as training wheel for mountain bikes),then never worry about disturbing others
• ADJUSTABLE RESISTANCE: Manually adjust the magnetic resistance according to your training needs.what's more,5 levels adjustable feet pads, you can adjust the heights
• EASY STORAGE & CARRY: Bike trainer frame is foldable, you can store and carry it easily
• SUIT FOR: Compatible with 26/27.5/28 inches mountain bikes，700c road bikes and fixed gear. We also put the quick release for your bike, easy put it on the bike trainer.

User questions & answers

Question:	will this work without a quick disconnect wheel
Answer:	Yes.It should work fine.I replaced my honda GC160 motor also 9/16 spacing and 3/4 shaft with a Predator 212 engine and this pump worked perfectly.Just needed a 3/16 keyway.
Question:	Can it be used with bikes
Answer:	Its not adjustable as far as I know, just 3600 psi max. I have it paired with a 6.5hp motor with adjustable throttle, so thats what I use to reduce pressure when needed.
Question:	If I have my own speed sensor can I use it with Zwift
Answer:	Compare the bolt pattern where it mounts to the motor. I think its pretty standard and would likely fit if your current pump is a horizontal mount.
Question:	Will this work for a 29 inch wheeled mountain bike
Answer:	Use a CAT or a AAA Industrial. Both are good units, generally the Cat pumps will cost more. Try searching PED pumps on eBay. Or search Husqvarna 316158 here on Amazon.

Product features

ROCKBROS Bike Trainer Stand Indoor Magnetic Bicycle Exercise Trainer

Brand: ROCK BROS

Material: High Strength Aluminium Steel

Net Weight: 7.2kg/Pair ( 15.86lbs )

Package Weight: 10kg/Pair ( 22.05lbs )

Package Size: 61.5cm * 18.5cm * 53.5cm ( 24.2 * 7.28 * 21.06 inches )

Max Load： 135kg ( 297.6lbs )

Color: Black

Wheel Base: 11-21cm ( 4.32-8.26 inches )

Suit For： 26-29 inches mountain bikes, 700c road bikes, fixed gear

• Stability On Any Surface: Built with a wide base and low stance for unshakable balance. Features 5 adjustable antislip rubber feet to even out any uneven flooring
• Spin In Silence: Smooth, seamless design and noise reduction resistance wheel mean you there’s no need to amp up the volume when you build up the burn (Note: The noise is mainly related to the materials and tread of bike tires. We highly suggest you to use road bikes because the noise will be louder if MTB is used.)
• 6 Resistance Settings: Train to your standards with bar-mounted remote and wide range resistance curve to simulate all cycling conditions
• Easy Bike Release: Ready to head outside? Just hit the press-down lever clamp to easily release and remove your ride. Front wheel riser block and rear quick release lever are included for quick installation.
• Great Compability:The Indoor Bike Trainer Stand fits any road or mountain bike with a 26-28" or 700c wheel and with rear wheel axel between 4.92'-6.57"

Product features

Sportneer Bike Trainer Stand Steel Bicycle Exercise Magnetic Stand with Noise Reduction Wheel

Silky-smooth Spinning

Our specialized noise-reduction wheel will make your workouts as quiet and can be. Better still, the reduced friction design prolongs the life of your bike tires for maximum riding time.

The stationary bike stand's noise reduction resistance wheel works to reduce the hum generated by your spinning rear wheel, so you won't have to pound out the jams and whirr the house down just to get some tunes going while you ride- much to the relief of your girlfriend, dog, and disgruntled neighbors. Also, the smoother resistance wheel can prolong the lifespan of your bicycle.

Easy to Assemble, Easy to Use

Ready to head outside?

Just hit the press-down lever clamp to easily release and remove your ride.

Short on time? No Problem.

The Sportneer Indoor Bike Trainer Stand can be assembled and disassembled in just a few short minutes. Just lock your bike in place, set your ideal resistance, and get pedaling!

Great Compability

This Indoor Bike Trainer Stand fits any road or mountain bike with a 26-28" or 700c wheel, and with rear wheel axel between 4.92'-6.57"

Adjustable Rubber Feet

Thanks to 5 level adjustable anti-slip rubber feet, this bike trainer can keep balance on uneven floor

Keep Your Bike Ready

Front wheel block and quick-release lever were included

Extreme Portability

Super tiny size for daily use and easy storage

Extended size: 22"x22"x15.5"

Folded size: 21.3" x 7.9" x 25.2"

• Make Your Own Stationary Bike: Bring your bike inside for an indoor cycling workout! The Sportneer Indoor Bike Trainer fits bikes between 26-29 inches, and is also compatible with 700C bikes. You won’t have to break the bank to invest in new equipment. Simply use what you already own
• Smooth Silent Spinning: Break a sweat without disturbing those around you! The fluid, high-quality resistance wheel ensures easy spinning that’s whisper quiet.
• Built To Last:Here at Sportneer, we want you to have the best. That’s why this bike exercise stand is made with a heavy-duty stainless steel frame that maximizes durability! You’ll be able to use it for years on end
• Solid, Sturdy And Safe: A stationary bike workout should be just that— stationary. The dual locking system easily locks your bike in place, and the extra wide frame and front wheel riser block eliminates wobbling. You’ve never had a ride quite like this
• Lightning-fast Setup And Extreme Portability: Assemble your bike trainer stand in no time, without the need for extra tools! Installation is effortless and intuitive. The frame can be folded into a tiny 24" x 7.9" x 25.2" size for easy storage and small enough to take with you so that you can enjoy a workout anywhere

User questions & answers

Question:	I have a domane alr disc 5 endurance bike and the quick release skewer isn't long enough... is there a longer skewer that i can order from somewhere
Answer:	Im sure there is, but I don't know a specific company. Have you tried going to a bike shop?
Question:	What is the warranty for this product
Answer:	Item comes with 30-day money back warranty, 12-month replacement warranty and lifetime technical support.
Question:	What's the difference between this item and the sportneer bike trainer stand steel bicycle exercise magnetic stand with noise reduction wheel
Answer:	This is a fluid trainer vs a magnetic style, so you will get "automatic" resistance increase as you pedal faster due to the design as well as something that feels a bit more like riding on the road. It's also a bit quieter over all than even magnetic which are still quiet compared to the fan style.
Question:	Is that baby going to be okay on the sofa
Answer:	Not in the long term. The dads personal safety/well-being/own interests are obviously more important than the childs saftey - which will probably be a pattern. The father will ignore the dropping grades, the circle of bad friends, and when the baby ends up on drugs, the father will ask "how did this happen?"

Product features

Sportneer Fluid Indoor Bike Trainer Stand, Bicycle Exercise Training Stand

Silky-smooth Spinning

Our specialized noise-reduction wheel will make your workouts as quiet and can be. Better still, the reduced friction design prolongs the life of your bike tires for maximum riding time.

Fluid Resistance Wheel

Any experienced cyclist can confirm that fluidity is the key to a great bicycle exercise stand.

The fluid resistance wheel eliminates obnoxious, distracting whirring, you can work out any time of the day without disturbing those around — your girlfriend, dog, and disgruntled neighbors.

Ultra Compact Size

The Sportneer Fluid Indoor Bike Trainer can be assembled and disassembled in just a few short minutes. The frame can be folded to an ultra compact size (only 25.2”x 24”x 7.9'') for easier storage.

• Make sure this fits by entering your model number.
• Protective levelness-adjustable feet caps: This magnet turbo trainer is secured by four non-slip feet caps, which prevents the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.
• Space saver: The foldable design render this magnetic bike trainer rather simple to store without occupying much space when not in use, it can be slid into any narrow place in your room. Its collapsible stand also makes transport a breeze.
• Solid construction: Constructed of quality magnet, rust-resistant alloy roller, and powder coated high carbon steel with the ability to support up to 120kg/264.6lb, our indoor bicycle trainer provides you with the most secure bicycle training method. The stand features M-shaped design for better stability, safety and adaptability.
• Use Tips: This bike trainer is designed for bikes with quick-release axles. Thru-axle adapters (not included) are needed for thru-axle bikes. For reducing humming sound, we recommend equipping your bike with slick tires and using the bike trainer on a carpet.

User questions & answers

Question:	How difficult is it to release the bike from the stand? Thanks
Answer:	Yes.
Question:	Will this fit wide tires like the throw back bikes
Answer:	Dear Valued Customer, Thank you for your interest in DRMOIS! Yes. You can use the quick release skewer provided by Bike Trainer Stand when riding outdoors. If you have any further questions or concerns, please email us. Thank you, DRMOIS Technical Support
Question:	Will this fit a 148mm boosted rear axle spacing? This is larger than your normal mountain bike. 210mm width roughly axle end to axle end
Answer:	Dear Valued Customer, Thank you for your interest in DRMOIS! Yes. It is. If you have any further questions or concerns, please email us. Thank you, DRMOIS Technical Support
Question:	Does the trainer have adjustable resistance
Answer:	24-28" available. 26" wheels will works fine.

Product features

Magnetic Bike Trainer Indoor Cycling Exercise Stand Steel Frame

Wanna enjoy bicycle training regardless of the bad weather outdoors? Our indoor magnetic bike trainer is perfect for you. It fits 26"-28" and 700C bike's wheel. It is built with heavy duty frame and max load up to 265 lb . With this cycle trainer, you could watch TV and enjoy your riding.

Magnetic Trainer: progressive magnetic resistance against your bike’s rear wheel;

Front wheel support: Curved groove on the support can perfectly align with the front wheel and effectively help fix the front wheel when exercising.

Package included:

1 x Bike Trainer;

1 x Front wheel riser block;

1 x Quick release lever;

1 x Instruction;

Specifications:

Color: Black;

Material: aluminum alloy, iron, plastic, magnet ;

Dimension: 21.4 x 14.6 x 14.8’’ (WxDxH);

Max. Loading: 265 lb / 120 Kg;

G.W.: 16 lb / 7.3 Kg;

Versatile:

Suits 26’’-28’’ MTB, 700C bike wheels w/quick release;

It is built with heavy duty frame and max load up to 265 lb;

With this cycle trainer, you could watch TV and enjoy your riding.

Clamp locks

This bike trainer stand is equipped with new mounting fittings that can be compatible with most quick release skewers. The fittings adopt shock absorption plastic, which can effectively buffer the partial resonance when using the trainer.

Foldable

Folded Dimensions: 21.4 x 7 x 17.3’’ (W x Thickness x H) ;

Space-saving: foldable structure when not in use;

Adjustable Feet

This magnet turbo trainer is secured by four non-slip feet caps, to prevent the trainer from displacing or damaging the floor during a workout. On each gear-like cap, the “teeth” are varied in thickness. You can rotate the cap and choose the right thickness to level the trainer.

About the trainer noise

• The magnetic bike trainer itself does not contain any part that would generate noise, which means there will be no humming sound if you simply roll the trainer by hand.
• The humming/noise comes from the bike itself. Try placing the bike upside down and turning it for 20 km/h in a room, and you can hear the same humming/noise sound generated by vibration.
• The use of slick tires is recommended. Or use the indoor bike trainer on a carpet to reduce the vibration sound.

Simple design, easy to assemble and dismantle

You can do exercise at home on your bike regardless of bad weather.

You can put this portable bike trainer anywhere in your house, garage or on porch.

You can folds it to a compact size for easy storage and travel.

You can train for core strength, stamina, cadence and endurance.

You can watch TV or stream a movie, enjoy your music while riding.

There is no traffic and no smelly vehicle fumes.

• 【Adjustable 6 Levels Resistance, Simulate Real Road Conditions】 INTEY Bike Trainer Stand equips 6 different resistance to simulate multiple road conditions. 1-2 levels like riding on a flat ground. 3-4 levels live riding on sand, 5-6 levels like climbing a slope. With the remote resistance controller mounted on Handle Bar, you can easily adjust the resistances to meet your resistance & speed while training. No need to get off the bike to adjust it.
• 【Strong Structure & High Stability】Stationary Cycling Trainer designed with dual-support triangle structure. Entire frame is super stable. Durable thick high-carbon steel material provides high load-bearing capacity. Anti-slip rubber pad help to level trainer and prevent scratches. With Bracket support and wide base of balance bike stand, you don’t need to rely on own to keep balance, so riding training on this can be very rest assured even you are unskilled bike novices.
• 【IMPORTANT】Magnetic Resistance Bicycle Trainer equips smooths and seamless Wheels, Built-In Noise Reduction Eliminates Rotating sound, providing a quiet workout environment as much as possible. Nevertheless training is Not Absolute silent. The noise is mainly related to the materials and tread of bike tires. We recommend to use road bikes and use the bike trainer on a carpet to reduce noise.
• 【Easy Assemble, Easy Go】Bicycle Exercise Stand is pre-filled. You just unfold the trainer without the need extra tools when you receive. After replacing the professional bike trainer's quick release lever, then you can start your training. Easily release bike and ready go out anytime you want. Foldable design and portable allows it can be store in any narrow space or car for carry.
• 【Great Compatibility】Compared to other brands who only fit in 26-28" wheel, INTEY Indoor Magnetic Bicycle Training Stand fits any road or mountain bike with 24-28" or 700c wheel.

User questions & answers

Question:	I don't have the quick release bike, can someone tell me if the mount holes are the size both sides? Last trainer I bought had different size holes
Answer:	I built it but it is sitting, free-standing. I didn't know there was an "installment" capability, maybe that is why I have a few extra pieces.
Question:	Mountian bike fit
Answer:	Only if you fold shaft of boots
Question:	Is it works for 29 inch tire
Answer:	2 support bars with a heavy cloth material
Question:	My bike doesn't have a quick release. Can I just put it in the brackets without the quick release
Answer:	These do not dent my boots. I have four boots I use these on. Keeps them straight and hanging up off the floor. Great way to organize and love your boots

Product features

Setup Instruction

• * DOUBLE LOCK SYSTEM: The two knobs on the left and right of the stationary bike trainer construct the dual locking system, making it easily to lock your bike in place. For each part, one bigger knob outside and one smaller inside reinforce the locking mechanism.
• * STEADY, STABLE AND FIRM: The indoor exercise bike trainer is designed with dual-support structure. The wide frame and front wheel riser block keep it away from wobbling and reach unshakable balance. The steady base and adjustable anti-slip rubber feet fits for uneven floor in different conditions, preventing movement for stability on any surface.
• * SMOOTH IN SPIN: When riding a bike at home, a smooth bike exercise trainer is definitely necessary. Bike trainer with noise reduction resistance wheel makes your cycling virtually silent. BTW, if noise is loud, it has a lot to do with the materials and tread of bike tires.
• * FOLDABLE AND PORTABLE: After quick installation, you can begin to ride indoor. After exercise, you can take the bike off the trainer and fold the bike trainer easily. You may put it at any corner in your home, or carry it with you to another place.
• * COMPATIBLE WITH BIKES: The Unisky indoor bike trainer stand fits any road or mountain bike with a 26-28" or 700c wheel. There is no need to buy a new one if you have a road or mountain bike of normal size. Bring your bike inside and begin indoor cycling workout.

User questions & answers

Question:	what is a quick release tire
Answer:	I dont know, of you can ride a bike and it can hold you, im sure this can hold you too!
Question:	If it is noisy when it is being used
Answer:	No doubt. Standard size bikes and the clamps for rear wheel adjustable By it
Question:	Do you have to have a quick release rear wheel? Will the stand work with a bolt-on axle (rear wheel
Answer:	I cant but at least 2-4 inches
Question:	Does this stand have variable speed levels
Answer:	Yes. I overlooked mine in the packaging at first, possible that it could be tucked into the package.

Product features

UNISKY Indoor Exercise Magnetic Steel Bicycle Training Stand

PRODUCT DETAILS

Resistance type: magnetic resistance trainer

Material: premium steel

Compatible bikes: road and mountain bikes

Compatible tires: 26-28 inch or 700c wheel

Maximum bearing capacity: 120kg (264.6pounds)

Item weight: 7kg (15.4lb)

Package weight: 8kg (17.6lb)

Color: red and black

Double Lock Button

Designed with double lock button and dual-support structure, the wide frame and front wheel riser block keep it away from wobbling and reach unshakable balance.

Easy to Assemble

The unique lock button can save time on assembling and disassembling the bicycle. Instantly set up or release your bike in just a few minutes.

Low Noise

Smooth, seamless design and noise reduction resistance wheel bring you silent riding experience. You can just keep the normal volume when you listen to music or watch TV. Perfect for the people that live in apartments or in other close quarters.

Sturdy Structure

The wide base and anti-slip rubber feet offer excellent stability and safety. High-carbon steel stand for stability and high weight capacity up to 264.6 LBS.

Product description

ZSW bicycle training platform can increase the joy of life and improve physical fitness.

Feature of some products

• The strong magnetic two-way flywheel damping design effectively prolongs the service life and avoids the mechanical problems caused by the traditional magnetic control method of adjusting resistance.
• Equipped with front wheel pads, it can bear a weight of about 330 lbs, so that people of different weights can enjoy the joy of riding.
• Foldable design is convenient to carry and store, easy to install.
• The aluminum alloy spiral screw rod and the steel pipe are welded to increase the firmness and stability of the equipment and increase the safety during use.
• The infinitely variable switch simulates the resistance in different situations and increases the realism when riding.

Material:Steel and magnet



Color:Black

Product Weight:22 lbs

Maximum weight capacity:330 lbs

How to install:

1️⃣ Unfold the bike rack and place it on level ground.

2️⃣ Place the electromagnetic wheel on the bottom of the frame and tighten the bolts to fix it.

3️⃣ Rotate the adjustment handles on both sides and place the rear wheel of the bicycle on the bicycle trainer.

4️⃣ Adjust the handle to make it firmly connected to the hub, and tighten the nut.

5️⃣ Adjust the knob to change the height of the electromagnetic wheel to fit the size of the wheel.;

6️⃣ Use the provided rubber gasket to install the magnetoresistive controller, and then place it on the handle.

⚠️Note:

🔴Read the instruction manual carefully before use.

🔴Do a warm-up exercise before exercising.

🔴Confirm whether the installation is secure before riding.

• Balance On Any Surface: The bike trainer stand built with a wide base and low stance for unshakable balance. This magnet turbo trainer is secured by four non-slip feet caps, to prevent the trainer from displacing or damaging the floor during a workout. The aluminum alloy spiral screw and steel pipe welded structure make the bicycle training frame more durable and stable.
• Super Noise Reduction Technology: The bike resistance trainer use a low-noise magnetic turbine, allowing you to enjoy the excitement of exercise in a quiet environment. Avoids the friction between the magnet and the flywheel caused by the traditional magnetic control adjustment method and prolongs the service life.
• Various Resistance Setting: The strong magnetic two-way flywheel damping design makes the bicycle training frame have a continuously variable adjuster, which can adjust different resistance through the power supply voltage of electromagnetic force, which can meet different riding requirements. Just need to train at home to simulate different scenarios.
• Widely Used Bike Resistance Trainer: Why choose our indoor training stand? When the bad weather is trying to stop your bicycle training, or you want to relax during a long and tiring work, the indoor bicycle trainer can let you complete the cycling exercise indoors. You can easily exercise at home without going out, and you can easily fold it into a storage bag after use.
• Strong compatibility: The stationary bike stand fits any road or mountain bike with a 24-29" or 700c wheel and with rear wheel axel between 4.92'-6.57". Maximum load capacity can reach 330 lbs / 150 kg.

User questions & answers

Question:	How does the front wheel remain stationary
Answer:	There is a switch on the base.
Question:	Will this bike stand work with 29in wheels
Answer:	We’re you able to return your fan and get you money back? I purchased this item and hoping I don’t have the same issue. Thank you

• 【Indoor Bike Trainers】: One of the problems with cycling, though, is that when the weather gets bad, conditions can keep you off the road or trail. Maybe it is raining or is too windy outside, or perhaps you need to avoid rush hour traffic or an unsafe dusk ride. This is when you just mount your bike on to a bike trainer and get the exercise that you want, but at home. There is no reason why you can not exercise with your bike when the outside weather is bad.
• 【Strong Structure & High Load-bearing Capacity】: The unfolded bicycle training stand forms a pyramid structure, which greatly improves the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 330 pounds. In addition, any bicycle with a wheel diameter of 26 ''to 28'' including 700c can be fitted to our stand.
• 【6 Level Resistance Adjustable】: The trainer includes a drive-by-wire device so that you can change the resistance from your handle bars directly. You can adjust the magnetic resistor and switch the six resistance levels in seconds to meet your requirements about resistance and speed.
• 【Smooth & Low Noise Operation】: There is almost no sound on the wheels on the riding platform. It is recommended to replace smooth tires during cycling training to reduce vibration, reduce indoor resonance or add carpet under the stage. In some cases it will be loud with MTB tires. If you owned a MTB with rough tires, careful to buy. Because MTB tires will be loud with all bike trainers, no matter how expensive it is.
• 【Portable Folding Bike Exercise Stand】: In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. It just takes a minute to set it up, clamp your rear axle with the quick clamp and adjust the contact between the wheel and the polished roller. No need to use other tools, you can directly complete the installation and disassembly process by putting up or unfolding the stand.

User questions & answers

Question:	Can this be used with an adult trike
Answer:	Thank you for your question. Yes, you can still set the radio to come on for your morning alarm.
Question:	My bike has raised tread. Will this work and be quite in use of device
Answer:	Hello, Yes, the alarm would go off with the white noise on as well. If you have any questions please contact us at 888-881-4668. Thank you.
Question:	Will a rear axle that is 7.5 inches tip to tip fit this unit
Answer:	Hello, Yes, the colon blinks non-stop with this alarm clock. If you have more questions you can call us at 888-881-4668 Thank you!
Question:	will a fat bike fit with 4.5 tires
Answer:	It should fit a 22". The bottom of the pan is 19" with a beveled edge, and the top of the pan is 22", the pan is about 2"-3" deep. The handles are made of metal with a heavy heat resistant plastic coating. You should be able to rest the pan on a 22" Weber, using the handles

Product features

DEUTER Bike Trainer (MT-04)

Indoor Bike Trainers

• In order to facilitate users to carry and store our bicycle training rack, we designed it into a folding style. It just takes a minute to set it up, clamp your rear axle with the quick clamp and adjust the contact between the wheel and the polished roller.

• The unfolded bicycle training stand forms a pyramid structure, which greatly improves the stability of the entire frame. Its strong material and stable structure enable it to withstand a weight of 330 pounds.

• MAKE THE SWITCH TO STATIONARY! – Mag Bike Stand Converts Any Mountain or Road Bike Into a Stable, Smooth-Riding Indoor Stationary Bicycle for All-Season Training, Conditioning, Fitness & Exercise – A Must-Have for Dedicated Cyclists!
• SUPER QUIET MAGNETIC TECHNOLOGY – High-Quality Flywheel Mechanism Creates Drag Against Tire to Replicate Real Cycling Experience – Built-In Super Noise Reduction Eliminates Whir, While Reduced Friction Extends the Life of Your Bike
• 6 LEVELS OF FIXED RESISTANCE – Convenient Handle Bar Mounted Cable Controller Lets You Choose Your Incline From Flat to Steep – Simulate All Kinds of Hills, Roads & Intervals – Extra Wide Base & Low Stance Ensures Perfect Balance at Every Setting
• SAFE, STEADY CONSTRUCTION – Stand is Composed of Durable, Heavy Duty Stainless Steel & Includes a Front Wheel Riser Block & Anti-Slip Rubber Pads to Prevent Movement – Connects in Seconds & Releases Via Quick Lever—No Tools Required!
• FOLDABLE FRAME FOR EASY TRAVEL – Portable Stand is Hard-Wearing Yet Lightweight & Compact So You Can Fold, Pack & Go – Kit Comes w/ FREE Sturdy Bag for Effortless Carrying & Storage – Compatible w/ Most 26-28 In & 700c Wheels

User questions & answers

Question:	instructions say if your bike has a bolt you dont have to remove the skewer. what does tjat mean? how do i tell if it has a bolt
Answer:	Hi, If the Bikes Rear Wheel has a Removable Bolt which Holds the Wheels in Place than the Trainer will work Perfectly. But if the Bold is not easy to remove you will need to replace it with the Included Quick-Release Skewer.
Question:	Does it have a weight limited
Answer:	This Heavy Duty Bike Trainer Stand has Can Hold an Unlimited Amount of Weight!
Question:	What minimum and maximum axle widths are supported
Answer:	I have this question too, and everyone seems to think they have the answer, but so far all I've seen is a lack of understanding of the different types of axles out there. Just so everyone is aware, NOT ALL bikes can use a QR (quick release) skewer. Many modern bikes can only use a threaded thru-axle. With past trainers, I've had good success using axles from the Robert Axle project and the Traxle from Kinetic. Many new bikes use hubs that are wider than they used to be. So Alpcour...can you please directly answer this question? : Can you use a bike with a 12x142 rear thru-axle with this stand? I understand that I will have to replace the axle on my bike. But the key question is if the dimensions are large enough to fit a bike with that axle width. Most trainers like this are NOT wide enough. Can you please clarify?
Question:	Can anyone explain what the black powdery substance that fell onto the floor under the rear wheel is from
Answer:	Make sure to rotate your tires when using a trainer, since it can cause uneven wear if you don’t.

• Functional home gym accessory: This fluid bike trainer fits for 26'' to 28'' and 700C wheels, and comes with a quick release skewer, so it requires a bike with a rear quick release wheel. Great for indoor cycling training, also an ideal gift for bicycle lover.
• Low-noise training stand: Compared with the magnetic trainer, fluid trainers are noticeably quieter, which is a highlight for apartment/condo/shared space dwellers.
• Simulated outdoor cycling: The fluid-impelled flywheel mechanism makes sure that the ride provided by a fluid trainer is more road-like in feel. Because the faster you ride, the higher the temperature inside will cause, and thicker the fluid will be, which means the trainer’s resistance becomes progressively more challenging.
• Sturdy metal construction: Constructed of aluminum fluid resistor, and strong and hard high carbon steel stand with the ability to support up to 265 lb / 120kg,our indoor fluid bicycle trainer provides you with the most secure bicycle training method.
• Unfolded overall dimension: 21.5 x 24.5 x 16’’ / 54.5 x 62 x 40.5 cm (WxDxH); Folded overall dimension: 21.5 x 8.5 x 19’’ / 54.5 x 21.5 x 48.5 cm(W x Thickness x H)

User questions & answers

Question:	Does this trainer work with bolt-on axle? What's the return policy if the trainer doesn't fit
Answer:	Please be more descriptive re "bolt-on axle." Thanks, Tom
Question:	What is the warranty on this Fluid Trainer
Answer:	Although we don’t have warranty card in the package, we will be responsible for all problems of this Fluid bike trainer as long as used correctly.
Question:	Will it fit my Specialized Rockhopper mountain bike
Answer:	Why would it not? The Yaheetech Fluid Trainer drives the rear-wheel of a bicycle. It specifies 26" - 28" as well as 700C wheels. That accomodates a very long list. Take a look at your Specialize's specs--do they fall within that range? My only question re fit would be whether the YFD would accomodate the disc brake, but I think I remember an affirmative to that question when I was looking at specs prior to my own purchase several months ago. So, I think, yes--but I can't be sure. The YFBT is a simple (read--accomodating to general use) device, but, then you have recourse to Amazon's return policy provided you can act quickly. Good luck, Chuck M
Question:	Hay productos de estos para bicicletas de niños de 20 pulgadas a 24 pulgadas? Por la pandemia ponerlos a activarse
Answer:	Sorry to tell you that we do not sell for the fluid bike trainer fit for 20'' to 24'', hope this will help you.

Product features

Specifications:

Materials: steel, aluminum, PE plastic;

Unfolded overall dimension: 21.5 x 24.5 x 16’’ (WxDxH);(Contains Fluid Flywheel)

Folded overall dimension: 21.5 x 8.5 x 19’’ (W x Thickness x H);(Contains Fluid Flywheel)

Suitable for 26'' to 28'' and 700C wheels;

Max. load capacity: 265 lb / 120 kg

G.W.: 22.2 lb / 10.1 kg;

Color: black

• ✿『EASY TO ASSEMBLE』 Our bike trainer with only a small amount of spare parts. According to our instructions, you can finish the dirty combination of the bike trainer stand in 15 minutes and start your workout. We suggest that you use the bicycle trainers in a more open area.bike trainer bike trainer stand bicycle trainers.
• ✿『FIVE RESISTANCE SETTING』 Our bike trainer can adjust to five resistance levels. When you reach one level, you feel like riding on a flat ground. When you adjust bike trainer stand resistance to three levels, you will experience something like riding on the sand. If you have confidence in yourself, you can set the bicycle trainers resistance level to five. It's like climbing a slope. bicycle trainers road bike trainer indoor bike trainer.
• ✿『EASY TO CARRY AND STORE』 It doesn't take up much space to carry and place our bike trainer. You can fold it up and put it in the car's trunk easily. You can also place the bike trainer stand in a corner of the room. When you want to use it, just take the bicycle trainers out and start exercising. Of course, first you have to have a bike.bike trainer indoor bike trainer road bike trainer.
• ✿『SUPER MUTE』 If you want to make sure that you don't disturb others while exercising, then our bike trainer is a good choice for you. When you use the bike trainer stand and set the first resistance, the sound will not exceed 60 decibels. Of course, the higher the resistance you set, the lower the noise you will make. If you set the 5 levels ,and bicycle trainers still makes a lot of noise, so that means you are too strong.bike trainer stand bicycle trainers indoor bike trainer.
• ✿『QUALITY ASSURANCE』 Our bike trainer is made of high quality carbon steel and can guarantee at least 300 pounds of weight. We guarantee that you will like our bike trainer stand. If any quality problems occur on our bicycle trainers, please contact us.bike trainer indoor bike trainer bicycle trainers.

Product description

Product Name: Magnetoresistive Bicycle Trainer Stand

Colour: Black

Material: stainless steel / engineering plastic

Weight: 11KG

Bearing weight: 135KG (including bicycle)

Suitable size: 20-22 inches

Applicable models: MTB road bikes can be used



Note:

Due to the manual measurement, there may be small deviations.

Please feel free to E-MAIL us if there are any problems and questions, we will try our best to MEET YOUR SATISFACTIONS WITHIN 24 HOURS.

• Great Way To Turn Your Bike Into Indoortrainer!Assembly was easy and works like a charm.With the cycling trainer, you can exercise at home with ease and leave those subjective or objective excuses behind.
• Adjustable height with convenient knob fits your different wheel size (20"~22").Note: you must ensure the bike is securely fitted at all times.
• Foldable frame structure provides you the safety training with a 297lb / 135 kg weight loading capacity(including bike's weight).
• It secured by four non-slip feet caps,five gears adjustable,humanized designed rubber foot pad can be adjustable for a different height. No need to worry that your ground is not flat.
• This low-noise magnetic turbo gives you a quiet exercise environment. Please note that the noise/friction sound comes from the friction between the wheels and the trainer. Our indoor bike trainer itself doesn't contain any noise-causing parts.

User questions & answers

Question:	My Dahon foldable bike has 20" wheels will this work for it
Answer:	I used this hotplate on a daily basis for 8 years before it died....and it only did because water spilled over on a pot of water I was boiling and shorted out the device underneath. I replaced it with the same hot plate, and use on a daily basis...love it.
Question:	How much does it weigh
Answer:	No, this product is made to connect with a 120V adapter.

• * DOUBLE LOCK SYSTEM: The two knobs on the left and right of the stationary bike trainer construct the dual locking system, making it easily to lock your bike in place. For each part, one bigger knob outside and one smaller inside reinforce the locking mechanism.
• * SMOOTH IN SPIN: When riding a bike at home, a smooth bike exercise trainer is definitely necessary. The fluid bike exercise trainer goes smooth on sound for the cycling. Design of the aluminum roller protects the bike tire. BTW, if noise is loud, it has a lot to do with the materials and tread of bike tires and you can adjust the touch pressure.
• * STEADY, STABLE AND FIRM: The indoor exercise fluid bike trainer is designed with U-shape structure. The extra wide frame and front wheel riser block keep it away from wobbling and reach unshakable balance. The steady base and adjustable anti-slip rubber feet fits for uneven floor in different conditions, preventing movement for stability on any surface.
• * FOLDABLE AND PORTABLE: After quick installation, you can begin to ride indoor. After exercise, you can take the bike off the trainer and fold the bike trainer easily. You may put it at any corner in your home, or carry it with you to another place.
• * COMPATIBLE WITH BIKES: The Unisky fluid bike trainer stand fits most road or mountain bike with a 26-29" or 700c wheel. There is no need to buy a new one if you have a road or mountain bike of normal size. Bring your bike inside and begin indoor cycling workout.

User questions & answers

Question:	I need a smaller one for 23 inch tire do you have one
Answer:	Don’t know but I think too small
Question:	Does this have a California Prop65 warning associated with it
Answer:	Sorry, I don’t know, but it is a very great product, it works great
Question:	I have the specialized brand bike. I need smaller than 26. Will this fit
Answer:	The description of the device will tell you what the minimum wheel diameter is. If it does not include that information, I suggest that you look up the Unisky website and send them a note.
Question:	Is this noisy? I have a magnetic trainer which is very loud, I thought I saw one of the living dead walk past my window
Answer:	The noise depends on the tire. I have a mountain bike and the tread on the tire was loud. Changed it to a road tire and the noise problem was solved. For now, I am only using the bike indoors, so having a road tire on the bike is not an issue.

Product features

START TO RIDE INDOOR!

Created by millions of bicycle enthusiasts and home users, Unisky’s products are delivering great pleasure and good experience to more and more people around the world.

Since the establishment in 2001, we have grown into a brand that integrates independent research and development with production of bike accessories.

Unisky Fluid Bike Trainer Stand

SPECIFICATION

Resistance type: Fluid Resistance

Material: Premium steel

Item weight: 22.05 pounds

Shipping weight: 25.35 pounds

Maximum load capacity: 265 pounds(120kg)

Compatible tires: 26-29" or 700c wheel

Compatible bikes: road and mountain bikes

SMOOTH SPINNING

The smooth surface not only protects the tires but also reduces the noise during riding, and the noise during riding will not be so loud as to disturb listening to music. The resistance increases as the speed increases.

DOUBLE LOCK

The double-lock mechanism and the front wheel block coming with the bike trainer can prevent the bicycle from shaking, and also they make the trainer be quickly assembled and disassembled.

STEADY AND STABLE

With premium steel and U-shape structure design, the bicycle trainer stand is very steady and stable. Anti-slip rubber pads on the stand feet can make the trainer adapt to uneven ground.

Note:

1. The fluid resistance component itself does not produce noise, and the sound of the tire with a smoother surface will be smaller.

2. It is suitable for standard tires of road bikes and mountain bikes. Thick tires are not suitable. After connecting with the trainer, the distance from the center of the tire to the ground is about 38.5cm. Therefore, you can find that the distance between the center of the tire and the ground should be less than 38.5cm.

3. This Unisky bike trainer can be adapted to the barrel or thru axle bikes, but an adapter is required. If you need it, please refer to our suggestion.

• FOR INDOOR USE：The trainer is much quieter than wheel-on bike trainers. Noise Level As low as 58db doesn't bother your neighbors.
• ACCURATE POWER DATA：Use the ThinkRider App for initial setup. Then the ThinkRider A1 can pass power information to compatible apps with ±3% accuracy, give you a better cycling experience.
• STANDARD CONFIGURATION：Power-meter inside, no need power source. 142mm /130mm Thru Axle Converters & Speed Cassette is also included. Meet professional training needs.
• DURABLE BATTERY LIFE：CR2032 battery inside, you aren't tethered to an outlet. Stand-by time up to 300 days, training time up to 300 hours.
• WILDLY COMPATIBLE: The indoor bike trainer stand fits any road or mountain bike with a 26'-29'/650c 700c wheel. Compatible with Zwift, PowerFun, PerfPro, etc. Gives you a realistic riding experience, even in your living room.

User questions & answers

Question:	What accessories does A1 contain? What other accessories do I need to buy before using
Answer:	Yes they are
Question:	How can I know if my bicycle is compatible with this trainer
Answer:	There are 12 different styles in 48 pairs of eyelashes and each has 4 pairs.
Question:	Does this work with zwift? if yes, can the app control the resistance? what data is transmitted to apps
Answer:	you can use baby oil to remove eye makeup, this is an inexpensive way. It’s the one trick someone taught me years ago and I’ve used it ever since. Just hold some over the eye on a cotton pad a few seconds and wipe away.
Question:	How can I increase resistance
Answer:	yes, I have had zero trouble with them falling off and use them at least three times a week. I do my regular eyeliner then a thin coat underneath. Never had a problem.

Product features

PRODUCT FEATURE

• ACCURATE POWER DATA：Use the ThinkRider App for initial setup. Then the ThinkRider A1 can pass power information to compatible apps with ±3% accuracy, give you a better cycling experience.
• STANDARD CONFIGURATION：Power-meter inside, no need power source. 142mm Thru Axle Converters & Speed Cassette is also included. Meet professional training needs.
• DURABLE BATTERY LIFE：CR2032 battery inside, you aren't tethered to an outlet. Stand-by time up to 300 days, training time up to 300 hours.
• FOR INDOOR USE：The trainer is much quieter than wheel-on bike trainers. Noise Level As low as 58db doesn't bother your neighbors.
• WILDLY COMPATIBLE: The indoor bike trainer stand fits any road or mountain bike with a 26'-29'/650c 700c wheel. Compatible with Zwift, PowerFun, PerfPro, etc. Gives you a realistic riding experience, even in your living room.

2020 NEW THINKRIDER A1 Direct-Drive Trainer

ThinkRider A1 bike trainer stand enrich your life of cycling indoor!

This bike trainer stand is just what you need to take your fitness to the next level. Whether you’re an experienced cyclist or a complete beginner, this bike trainer stand is just what you need to take your fitness to the next level.

FOR INDOOR USE

The trainer is much quieter than wheel-on bike trainers. Noise Level As low as 58db doesn't bother your neighbors.

ACCURATE POWER DATA

Fixed 3% slope resistance, meet professional training needs.

DURABLE BATTERY LIFE

CR2032 battery inside, you aren't tethered to an outlet. Stand-by time up to 300 days, training time up to 300 hours.