12 best trike conversion kit

• 🚴‍♀️36V 500W super power brushless gearless hub motor, Restricted to 750W and 19.88mile/h by default as a road-legal kit
• 🚴‍♀️Crank speed sensor for pedal assist, Brake Levers cut off the power supply to the motor safely
• 🚴‍♀️Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power
• 🚴‍♀️Aluminum alloy powerful controller guarantee big current supply
• 🚴‍♀️Twist throttle has battery level display and power-cut off button

User questions & answers

Question:	So if this hub has magnets, can it generate electricity from coasting / manual pedaling
Answer:	I think this depends on the controller, and the one that comes with this kit doesn't support that.
Question:	what type of connectors are on the battery control wires
Answer:	they were something cheap I Soldered nicer ones on.And if you don’t put the controller close to your battery you will have to make an extension wire.
Question:	I only do 12 mph on the average enjoying the view so I only need coaster brakes. So can this work without the brake levers
Answer:	I switched mine out for the ones that came with the kit because they also work as a kill switch as they are connected to the controller.
Question:	Why do you say it is limited to 19.88 mph yet in another place you say you get 23 mph? how do i by pass that so i can go even faster
Answer:	there is a limiter wire, the two single wires connect together to limit power to 20 mph for local laws. But it's also a factor of your battery power. 36v/10ah (360 watts) will max out at 20 (under 15 with the limiter connected). A higher amp hour battery will have more wattage available for the motor. disconnecting the wires will allow you unlimited power until you fry the motor from an oversized battery exceeding the input design limits. The power wires are not heavy gauge so they will only handle so much current before melting. A 36v/14ah battery will peak at 504 watts...that's probably how the other guy was hitting 30-36 mph.

Product features

JAXPETY 36V 500W E-Bike Front Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike,which delivers unequaled performance and reliability.You will be out cruising along at 23.6mile/h without a sweat!

Provides you with a whole wheel with tire, not just the tire frame. Dual model controller guarantees you can ride your motorized bike even when the signal source is disabled.

Ungraded Intelligent Motor Controller:

For motor or controller issues your electric bicycle can fail to work properly. This single white switch wire will help you to determine the cause.

Sharing From Our Precious Customers

Product description

12-16" Trike Conversion Kit 1 Speed Coaster 5/8" axle Chrome.

• 12-16" Trike Conversion Kit 1 Speed Coaster 5/8" axle Chrome.
• Used to convert a 12" or 16" bike into a trike.
• Kit sold like picture. Additional parts like wheels, tires, tubes, and rim strips are sold separately.
• Uses hollow hub wheels

Product description

Trike Conversion Kit 7 Speed 2407-T Axle 15mm Black. this trike need special wheel right and left wheel 26" 36/SpokeTrike Alloy Hollow-Hub Left & Right Wheel Set ASIN: B0749FXXSM 24" 36/SpokeTrike Alloy Hollow-Hub Left & Right Wheel Set ASIN: B0749FXXSM 20" 36/SpokeTrike Alloy Hollow-Hub Left & Right Wheel Set ASIN: B07KKPPFCT

• Trike Conversion Kit 7 Speed 2407-T Axle 15mm Black.
• this trike need special wheel right and left wheel 26" 36/SpokeTrike Alloy Hollow-Hub Left & Right Wheel Set ASIN: B0749FXXSM 24" 36/SpokeTrike Alloy Hollow-Hub Left & Right Wheel Set ASIN: B0749FXXSM 20" 36/SpokeTrike Alloy Hollow-Hub Left & Right Wheel Set ASIN: B07KKPPFCTck.

User questions & answers

Question:	Will this fit the wide 20" & wide 24" tires
Answer:	To whom it may concern: As for the Trike Conversion Kit 7 Speed 2407-T, unless you have a friend with a "FULL" machine shop, you might think twice about getting this unit There are things that they do not tell you up front. Yes it does fit with a few modifications, you will need to drill new holes in the bike frame, which voids the warranty on the bike from Schwinn, "Note" axle is 15mm, try and find 26" wheels with 15mm hubs. GOOD LUCK. Does not come with the derailleur for changing gears. It came with no instructions on how to install. You are better off buying a bike that already has a gear system installed. Do waste your money or time.
Question:	Could this be used to convert my Schwinn stingray chopper bike into a trike
Answer:	Yes, if your beach cruiser is already using a derailleur for gearing. You just remove the chain, rear brake, and the back wheel, insert the kit where the wheel was (you may have to spread the fork (I used a car jack to do that), and carry on. There is some chain tightening required, some locking out of the outer chain ring if you have a front derailleur mechanism, and a some adjustments of the rear brake because the kit comes with a disc brake, which is still controlled by the cable from the front handlebar. Make sure you order the wheels and tires at the same time. This will simplify the install. There was a time I would have done this stuff myself, but I am trying to simplify my life so I got a bike mechanic on the case.
Question:	Multi gear conversion for Schwinn Meridian tricycle
Answer:	I purchased the bag for other equipment, but it would hold a DSLR body and a 70-300 lens.
Question:	Can i put this on a beach cruiser frame with Fat tire wheels
Answer:	My Olympus OM D E m10 with the Olympus 75-300 does fit, but I don't know about other combinations. I also have an Olympus 60-300 from the 4/3 system which, with adapter just fits in the bag WITHOUT CAMERA. So it depends on your camera and lens.

Product description

Flared Stander Hollow Trike Conversion Kit Fender Set Chrome, Various Sizes

• 20" Flared Hollow Trike Conversion Kit Fender Set Chrome.

User questions & answers

Question:	What is the material these are made out of? Plastic, or steel? And are the support braces stiff enough to keep the fenders from hitting the wheel
Answer:	Hello, These are about 68mm wide. or about 2.67".
Question:	Can these fit on my sun ez-3 usx hd trike with 20 inch wheels
Answer:	Yes it includes hardware
Question:	Hi, Would like to how wide are these gards? Phil
Answer:	yes
Question:	Does this include mounting hardware as well
Answer:	I used it to convert a Schwinn Lil' Chik into a tricycle for a 95 year old friend of mine. the difficulty for me was having to rebuild the back axle holes of the bicycle to accommodate this specific trike conversion piece . It is extremely well built and despite having to modify the rear end to ensure a sturdy build it is well worth the money. However, it will take some custom work.

• The Conversion Kit Uses A Coaster & Front Wheel
• Fits 26" Bicycles

Product description

Convert a bicycle into a tricycle. Use your existing front and rear wheels. Would also need an extra front wheel for the 3rd wheel.

• Size 20" For Lowrider Bicycles
• Size 26" For Beach Cruiser Bikes

User questions & answers

Question:	What else does this require to bolt to a frame before attaching wheels for convertion from bike to trike
Answer:	Sorry, I'm not sure but I think so.

Product description

Conversion Kit Use Hollow Hub Black.

• Conversion Kit Use Hollow Hub Black.

User questions & answers

Question:	It seems that the axle is of a non standard diameter, I have difficulties finding bearings for this axle. Any help or feedback is much appreciated
Answer:	No wheels are tires come with the kit. The kit is as you see there. This kit uses hollow hub wheels. You can browse our amazon listings for hollow hubs, tires, rims strips and tubes
Question:	How is this installed
Answer:	It's 5/8
Question:	What kind of tire and rims come with this,if not what type do you use and where would you get them.Thank you
Answer:	This is a complete rear end set, but you still need an extra front wheel, tire, tube and small chain if you have an existing bicycle and wanted to convert it.
Question:	is the axle 15mm in diameter
Answer:	Steel and yes they will support the fenders from hitting the tire.

Product description

Conversion Kit Coaster Hub Chrome.

• Conversion Kit Coaster Hub Chrome.

User questions & answers

Question:	any room on this to add one more sprocket? I need it on backwards as a freewheel. like a jackshaft for motor bicycle
Answer:	Yes it will
Question:	Would this work on a kids 20" BMX bike
Answer:	I have used it on two different trikes. A Sun and a Worksman 3 wheel bikes. It worked great on both units. Hope this helps.
Question:	Would this work connecting a 80cc motor bicycle chain to the other side
Answer:	Don't know your bearing size or axel size. My axle OD was smaller then the bearings ID so I used some 24GA sheet metal as a shim very inexpensive fix.
Question:	Will this work on a schwinn meridian trike
Answer:	Just take off the back wheel & bolt it on in its place

Product description

Our newest Sun Traditional Trike can be made even more useful with the addition of a powerful rear disc brake. This rear disc brake conversion kit includes all necessary components for upgrading your 2016 or later Sun Traditional Trike to smooth and safe braking under hard conditions. The parking brake feature on both front and rear brake levers allows you to lock either or both brakes simultaneously to load or unload with ease. Simple and common parts mean easy maintenance for years of use. Kit includes all components including items such as cable ties and other small parts for an original-equipment look.

• Intended for use on the Sun Bicycles 24" Traditional Trike 2016 or newer with updated derailleur tab and brake mount on rear unit
• Promax mechanical dis brake caliper and 160mm stainless steel rotor with 15mm trike axle adapter
• All components necessary for upgrade are included
• Includes zip ties, axle keys, new grips, and other small parts

User questions & answers

Question:	Will this work with older models
Answer:	15mm
Question:	would this break work on a Trailmate Desoto Classic 3 wheel bike
Answer:	Nope. Pretty straightforward installation
Question:	What diameter axle is this for
Answer:	Not that I'm aware of. If I could add another sprocket I could use a gasoline motor to operate my 3 wheel bike.
Question:	Is instructions how to install included
Answer:	No. This hub is for a 3 wheeled bike only.

Product description

Sun Bicycles Trike Hub Conversion Kit

• This product functions properly and safely but produces a vibration noise while braking. The noise is not indicative of a defect issue. Please expect this vibration noise when using this product.
• 1 Speed Shimano Coaster Brake Trike Conversion Kit0

User questions & answers

Question:	Will this work with the lowrider conversion kit
Answer:	This gives you a coaster brake on the rear wheel. There is one to make a 3 speed, but it is more money.
Question:	Is there instructions for this kit
Answer:	I have this unit on my Threewheel trike. The coaster brake will work just like any two wheeler. You will only be braking one rear wheel when you pedal backwards to apply the brakes. “Hopefully this answers your question “
Question:	whats it do ? turn it into a 3 speed
Answer:	It will work with any fork that has a mount for a disc break assembly. You can always buy a new fork for an older model.
Question:	Does this add a rear peddle brake or remove it
Answer:	No, it is specific for the Sun brand

• Complete Set: 1 Front & 2 Rear Fenders , Fender Braces, Bolts & Nuts
• Old School Flared Style Fenders
• Available in 12",16", 20",24" & 26"
• (68mm Wide)

• Complete Set: 1 Front & 2 Rear Fenders , Fender Braces, Bolts & Nuts
• Old School Flared Style Fenders
• Available in 12",16", 20",24" & 26"
• (68mm Wide)