11 best mountain bike fork mount

• ✅ Versatile: Great for Storage or Transportation. Can be mounted in a garage, home, shed, etc for storage. Can be mounted in a truck bed, van, or on a trailer for transportation.
• ✅ Comes with quick release skewer for quick access.
• ✅ Strong and lightweight Alloy Construction.
• ✅ Mount for 9x100. Fits many bicycles that use a standard 9x100 drop out.
• ✅ 1 Year Manufacturer warranty against defects. Satisfaction Guaranteed. ✅

User questions & answers

Question:	Dimensions? HxLxW
Answer:	50 x 110 x 38mm, the skewer is apox. 170mm as well, thank you for your inquiry!
Question:	What diameter are the mount holes
Answer:	I used a 1/4" drill bit and 1/4 x 3/4 bolts and they fit perfectly. Obviously the length of bolt may vary depending what you're mounting to.
Question:	Hello. Does it fit for a 9mm bicycle fork mount
Answer:	It fit my bike... I think it’s standard size. I will tell you that I tried to weld it in my truck and it’s not real steel.
Question:	Can I buy a replacement nut that was lost
Answer:	I am sure you can just head to Lowes un the hardware section & you should be able to match one there or if it's the special one on the end of the axle you get that at a local bicycle shop

Product features

Strong & Lightweight

Perfect for Storage

Essential for Transport

Product description

【20,000 UNITS SOLE GLOBALLY!! IT WAS PUBLISHED IN THE MAGAZINE IN JAPAN ”BiCYCLE CLUB May 2020”!!】



【WITH THE KEYHOLE FOR FIXING】

It's the bracket for fixing the front fork end that remove the wheels

The end bracket itself becomes a stand.

Since there are three holes (Two holes are keyhole type) for fixing bolts

it can be fixed by hanging it on the bolt or directly by bolts.



【COMPATIBLE WITH ROAD AND MOUNTAIN BIKES】

Since it extends from a width of 9 cm to a maximum of 12 cm,

it can be used for both road use and MTB use



【CAN BE USED WHEN STORED/CAR MOUNTED】

Can be used in many kinds of situation, such as travel, car mounted or indoor storage and maintenance.



【10 VARIETY OF COLORS】Black, Matt Black, White, Pink, Celeste, Orange,red,Sky Blue,Green,Arabesque



【Size】W:15.3cm×L:7.3cm×H:4.3cm



【Weight】0.68lb(310g)



【How to attach】

1.Raise the lever,loosen the bolt and expand to required end width.

2.Attach the end bracket to the tip of the front fork with the front wheel removed.

3.Fasten the both side of the bolts.

4.Decide the pedestal angle of the end bracket and lower the lever for lock.

• 【20,000 UNITS SOLD GLOBALLY!! IT WAS PUBLISHED IN THE MAGAZINE”BiCYCLE CLUB May 2020 in Japan”!!】
• 【WITH THE KEYHOLE FOR FIXING】 It's the bracket for fixing the front fork end that remove the wheels The end bracket itself becomes a stand. Since there are three holes (Two holes are keyhole type) for fixing bolts it can be fixed by hanging it on the bolt or directly by bolts.
• 【COMPATIBLE WITH BOTH ROAD AND MOUNTAIN BIKES】 Since it extends from a width of 9 cm to a maximum of 12 cm, it can be used for both road use and MTB use
• 【CAN USE IT IN MANY SITUATIONS】 It can be used during travel, car mounted or indoor storage and maintenance.
• 【10 VARIETY OF COLORS】Black, Matt Black, White, Pink, Celeste, Orange,red,Sky Blue,Green,Arabesque 【Size】W:15.3cm×L:7.3cm×H:4.3cm 【Weight】0.68lb(310g) 【How to attach】 1.Raise the lever,loosen the bolt and expand to required end width. 2.Attach the end bracket to the tip of the front fork with the front wheel removed. 3.Fasten the both side of the bolts. 4.Decide the pedestal angle of the end bracket and lower the lever for lock.

Product description

The 970 Fork Block mounts to any solid surface, such as a truck tool box, trailer, or a home-made custom rack. Uses 6061 aluminum body with heavy duty 9mm quick release skewer.

• Mounts to any solid surface, such as a truck tool box, trailer, or a home-made custom rack
• Uses 6061 aluminum body with heavy duty 9mm quick release skewer
• Fits front wheels 100mm O.L.D. (Over-Locknut-Dimension)
• Pre-assembled
• Lifetime warranty against defects

User questions & answers

Question:	Are there pre-drilled holes in this base
Answer:	You will receive exactly one copy of M Latios Full art card in this item listing. Thank You.
Question:	does it fit a mountain bike
Answer:	All of our cards are custom made
Question:	Is the mount steel or aluminum I need to be able to weld it to my custom spare tire rack in the bed of my truck
Answer:	It's just like any other pokemon packs, the only Mega you are know for sure your gonna get is Mega sharpedo . The other packs will be random.
Question:	what is the center to center distance between the bolt holes
Answer:	Yes I order directly from a distributor. They are brand new.

Product description

Secure your bike in the back of your SUV, in your pickup, or even on top of your car with the Delta Bike Hitch Pro 2 locking fork mount. The Bike Hitch Pro 2 pairs conveniently with the Delta Stable Loader, Wheel Hitch, or Wheel Holder, and keeps your bike from rattling around as you head to the trails or country. The mount features Delta's patented locking lever for security, along with an ultra-rigid 9mm skewer. The mount also offers pre-aligned positioning for easier fork installation. And the Bike Hitch Pro 2 holds up to rough weather thanks to the special anti-rust treatment and tough powder-coat finish.

Secure your bike in the back of your SUV, in your pickup, or even on top of your car with the Delta Bike Hitch Pro 2 locking fork mount. The Bike Hitch Pro 2 pairs conveniently with the Delta StableLoader, Wheel Hitch, or Wheel Holder, and keeps your bike from rattling around as you head to the trails or country. The mount features Delta's patented locking lever for security, along with an ultra-rigid 9mm skewer. The mount also offers pre-aligned positioning for easier fork installation. And the Bike Hitch Pro 2 holds up to rough weather thanks to the special anti-rust treatment and tough powder-coat finish.

• Locking fork mount secures bikes to the back of a pickup, SUV, or car roof top
• Pre-aligned, 9-millimeter skewer for easier bike entry/exit and extra security
• Patented locking lever does not include lock
• Special anti-rust treatment with tough powder-coat finish
• Lifetime warranty against defects

User questions & answers

Question:	What is the difference in this one and the basic delta mount that is $10 cheaper
Answer:	It's about 1-1/2 inches
Question:	Are you suggesting to you use 5/16 screws for mounting the fork? Is that how large the two holes are
Answer:	Yes either flat to wall holding up or opens to 90 degrees and locks I used for small extendable table in motor home work great
Question:	Is the mount steel or aluminum I want to weld it to my custom tire rack in the bed of my truck
Answer:	I think from the description it will hold 60kg, "the maximum can reach 60kg" reach = support? I don't know what else the weight would refer to.
Question:	Can someone tell me how The lock mechanism work? Thank you
Answer:	I have ordered cards from Baron-Barclay for many years. I have never seen jumbo cards from them.
Question:	How far apart should these be from each other? I have about 5 feet of space and would like to fit as many as I can
Answer:	No, but each deck has a card with bridge scoring.
Question:	Would this work with beach-cruiser type bikes? (Yes, they don't have the quick-release front wheels, but after unbolting
Answer:	yes and a top loader
Question:	How does the quick release work? Am i missing something or is the unscrewing the quick release? I feel like I am missing something about the lever
Answer:	It is a real Pokemon TCG card...
Question:	Will it work with thru axel
Answer:	Yes, these EX cards have text in English, though the artwork will usually show Japanese characters.

Product features

STORAGE

TRANSPORT

RASKS

STORAGE

DELTACYCLE

For over 30 years, creating and selling useful cycling products with an innovative difference has been our mission. With proud roots in the early environmental movement, enhancing the cycling experience has been a labor of love for us here at Delta since our inception. We want to help people enjoy their cycling so there will be more bikes in use every day.

• Dial in Your Shocks For A Great Ride – Pump low volume, but high pressure, capable of achieving 300 Psi / 20 BAR. Great for shocks with Schrader valve connection used for bikes – road, mountain and motorcycles.
• Perfect The Pressure in Your Suspension – Precision calibrated pump allows you to perfectly tune the travel and damping in your forks and rear shocks – an essential for all mountain bikers and motorcyclists!
• Accurate Regulation & Adjustment – Clear and easy to read 1.5” industrial gauge with PSI & Bar readout. Fine-tune bleeder button to obtain the exact pressure for the ‘ultimate comfort’ on your ride. ‘2 Stage Anti-Leak’ valve head delivers a secure valve connection when pumping and ‘no air leaks’ when removed.
• Comfortable & Easy to Use – Pull out T-Handle with ergonomic design ensures ‘pinch-free’ pumping. 6” swivel hose with pivot mount makes sure it’s easy to get things lined up and pump in any angle, which we know can be especially difficult with shock suspension.
• Pro Quality & Performance – High quality CNC machined alloy head and barrel for strength, reliability and lightweight. We’re so confident about our bike tools that if you have any product issues, we’re very happy to either provide a Refund or a Replacement on your purchase!

User questions & answers

Question:	Will this pump fit rockshox SID models
Answer:	Yes Yes this is a high pressure pump design for your Front fork, Shock and seat post All are high pressure with the schrader valve this will work
Question:	hi my husband is an occasional mountain bike rider who wants a pump thats electric & can plug into a wall outlet. Is there one
Answer:	No. unless you are planning on pumping for a really long time. This is for air fork/shock
Question:	Is this pump life time waranted
Answer:	That looks like it is a dirt bike fork, this shock pump is meant for a mountain bike but as long as that dirt bike fork has a shrader valve and does not need more than 300 psi you should be good with it
Question:	Does Pro Bike Tool have a shock pump for presta connections
Answer:	Works just fine on my '13 crf450 air forks. Same pump the other companies charge double for

Product features

EASY TO USE AND ACCURATE SHOCK PUMP FOR YOUR FRONT AND REAR SHOCKS

When you get your new mountain bike you want it to feel and work its best from the beginnng and ongoing. Setting up the suspension for your MTB will significantly change how the bike feels, so it's worth taking the time to get it right using our precision calibrated bike shock pump.

Our easy to use and accurate shock pump can be used for rear and front bike suspension including Rockshox and Fox shocks. The pump is capable of delivering up to 300 psi / 20 BAR with a clear and easy to read 1.5" industrial gauge with PSI and BAR readout. The pump design uses a 2 Stage Anti-Leak valve head, which delivers a secure connection when pumping and no leaks when removed. Fine tune bleeder button enables you to obtain the exact pressure for the ultimate comfort on your ride.

The pump is comfortable and straightforward to use as it features an ergonomic T-handle for pinch-free pumping. The 6" swivel hose with pivot mount design makes it easy to get things lined up and pump at any angle.

WHAT IS SUSPENSION SAG?

Suspension sag is the amount of suspension travel used when you are sitting on your bike in a natural riding position. This means that when you get on your bike and have your weight distributed like you would when riding, the suspension should be compressed some amount. The reason that we want sag is so the wheels are able to conform to the contour and shape of the ground while riding over rough terrain.

With too much sag, meaning the suspension travel is compressed too much when weighted, the suspension may bottom out too often and the bike's geometry may be out of wack making it harder to corner, jump, etc. With not enough sag, you aren't getting the full benefit of a suspension mountain bike and the bike will struggle to find traction.

HOW TO DIAL IN YOUR SHOCKS FOR A GREAT RIDE

There are two main steps to setting your suspension

1. Setting your sag - the amount of movement in your suspension.

2. Setting your damping - how quickly the fork or shock returns to its resting position after it has compressed.

To set your sag, use your shock pump to adjust the air level in your stanchions so that they sink approximately 25% of their total length when you put all your weight through the bike.If the movement is less than 25% of the stanchion’s length, you need to bleed air from your shocks with the shock pump. If the movement is more than 25%, you need to add air with your shock pump. This process requires a little trial and error and it helps to have a friend assist you.

When you’re happy that your stanchions are moving around 25% down the shock/fork, take a note of the pressure that you have in the stanchion for future reference. You will next need to set your damping by adjusting the rebound knobs on your suspension.

BEST SELLERS

With over 500,000 bike tools and products sold so far - that many people can't be wrong!

COMMUNITY

We've partnered with cyclists and cycling teams around the world to support all areas of cycling.

PASSION

Everyone on the PRO BIKE TOOL Team is a passionate cyclist, this is what we love!

Who We Are

PRO BIKE TOOL was born in 2015 when founder Chris left the safety & security of corporate life to follow his passion for cycling.

Taking a huge leap of faith into the world of entrepreneurship, Chris dedicated himself to building a business that produces the highest spec tools at a value making them accessible to all riders.

We pride ourselves on giving you the ultimate user experience. From our top-quality products to our commitment to great service, we’re here to make your life easy.

Product description

The Blockhead Bike Mount is a gift to any rider with a flatbed truck or trailer. All it takes is two bolts and you've got yourself a place to install this handy fork style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Go ahead, get creative.

• Bolt anywhere bike mount: A safe way to transport bikes on most truck beds and trailers with flat beds
• Compatible with fork-style: Fits most bikes with 9mm x 100mm front hubs; Open design works with bikes with disk brakes
• Built to last: Corrosion-resistant anodized construction is built to withstand the elements
• Loads up easily: Single-sided adjustment skewer with long throw for easy bike loading; Get out of town and on the trail faster
• Easy install: Basic assembly takes 10 minutes and requires 2 bolts

User questions & answers

Question:	Does this include the option to add an SKS lock as pictured or does it come with a lock
Answer:	Hi, thank you for your inquiry. This bracket can fully open or closed, but can not adjustable position. Should you have any further question about this product, please kindly contact us at [email protected].
Question:	Will this work for a fat bike with a wide fork (almost
Answer:	/Duration 0:05Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:05 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Hi, thank you for your inquiry. To open this bracket, please press and hold the push-on snap, and pulling it up until you heard the "click" to ensure the leg locked. Here is the video for your reference. Should you have any further question about this product, please kindly contact us at [email protected].
Question:	Do you have to drill holes or does it deap around and clamp? There seem to be two different pictures of this product
Answer:	Hi,that would like the photo as, 90 degrees, hope the picture will help you
Question:	Could i use this as a make shift front fork mount for my road bike
Answer:	The length of this product is 10 inches，the size of the wooden platform/frame can be set according to your needs.

Product description

If you're looking for a rigid fork for your custom hardtail or dedicated singlespeed ripper, the Whisky No. 9 MTB Fork is certainly a worthy choice. With a tire clearance of up to 29 x 3. 0-inches or 27. 5 x 3. 25-inches, it breathes new life into rigid mountain or plus bikes while absorbing light trail chatter when the going gets rough. The fork is constructed from unidirectional carbon fiber throughout for reliable strength at a low weight, and features a tapered steerer tube and thru-axle dropouts for responsive, confident steering. This particular model fits hubs with 15 x 100mm axles. If you're looking for a rigid fork with Boost 15 x 110mm spacing, check out the Whisky No. 9 Boost LT fork.

• FULL UNIDIRECTIONAL CARBON CONSTRUCTION: Perfect combination of stiffness, vibration dampening, and weight savings over traditional metal forks
• MODERN DESIGN: Ability to fit up to 29in x 3.0in or 27.5in x 3.25inch including plus sized tires; Robust 15mm thru axle delivers stability and precise handling
• AESTHETIC: Clean, straight lines, and matte carbon finish compliment any mountain bike while maintaining a classic look.
• UPGRADE: Ideal fork to add performance, weight savings, and durability to your mountain bicycle; ride longer, faster, and with more comfort
• WARRANTY: 5 Year limited with crash replacement policy

Product description

* Special anti-rust treatment with tough powder-coat finish

* Features patented Delta locking lever

* Ultra-rigid 9mm skewer

* 4” long, 1 ½” wide, 3 1/8” center from hole to hol

• Pre-aligned skewer positioning for easier bike entry/exit
• Quick-release lever
• Ultra-ridged 9 millimeter skewer for secure transport
• Anti-rust aluminum body
• Lifetime guarantee against defects

User questions & answers

Question:	What prevents someone from unscrewing the black "nut" on the opposite side of the axle from the locking lever? Then the axle would slide right out
Answer:	On their website, Zinus says about this (and all their mattress covers): "The cover is not meant to be removed and is not washable. Please follow the care instructions on your mattress label. We recommend using a mattress protector to keep your mattress like new."
Question:	mmX120 Fat tire bike, does it fit
Answer:	Memory Foam is definitely different, as an activity surface. Takes some getting used to. Waterbeds are worse, though. You might try using a slightly inflated air mattress, with strong baffles, on top of the bed to give a bit of springiness to you for those "special" times. That's the only thing that comes to mind, that "might" work, short of going back to an inner-spring mattress. You're right, though. It does take some of the fun out of it and I was only using a Two inch thick mattress topper of memory foam. A whole bed made of the stuff, I can't even inagine how it would complicate matters. I have bad knees and find it difficult on memory foam to crawl across the bed. Like you'd have to if you wanted to hang or change a picture above your bed. Hurts like the dickens! But for sleeping it's great stuff!!!
Question:	What would you attached it with on a Xterra track cargo system
Answer:	The layers are different. This mattress has1 inch microfiber quilted to soft knitted jacquard cover, 1 inch Viscolatex Responsive Foam, 2 inch memory foam, 3 inch comfort foam, & 5 inch high-density base support foamThe green tea 12" 3 inches Memory Foam, 2 inches Comfort Foam, 3.5 inches Airflow High-density Foam, 3.5 inches Airflow High-density Base Support Foam
Question:	Will these fits bikes with shocks and bikes with forks? what is the width fo the bracket
Answer:	I am looking at this years later after I bought it because this bed kills my back. Both my girlfriend and I are laying on this bed right now with backaches looking for another mattress. I started going to a chiropractor because of this bed its so soft I like sink into it. Im only 5'5" and about 155lbs.

Product description

Description



Are you looking for a professional, yet affordable bike fork mount? Are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? If yes, look no further! Our professional bike block fork mount must meet you needs. It is one of the best choices for you.



Features



- Color: Silver.

- Material: Aluminium alloy.

- Size: 16.5 x 4 x 5.9 cm.

- Comes with quick release skewer for quick access.

- Great for storage or transportation.

- Alloy construction, hard structure and heavy bearing.

- Can be mounted vertically or horizontally.

- Mounts to any solid surface, such as a truck tool box, trailer, or a home-made custom rack.

 



Package Including

1 x bike fork mount

• Great for storage or transportation.
• Alloy construction, hard structure and heavy bearing.
• Can be mounted vertically or horizontally.
• Mounts to any solid surface, such as a truck tool box, trailer, or a home-made custom rack.
• Comes with quick release skewer for quick access.

Product description

eXotic Carbon Rigid MTB Fork - Disc Only Post Mount Super sleek carbon fiber stanchions For 29er Stunning flagship carbon mountain bike fork with 7075 Al steerer, carbon fiber tube stanchions and forged 6061 Al dropouts. This fork is disc brake specific and has a Post Mount. Rigorously tested to EN and DIN standards Product Code: CC-F0E90

• 49cm 29er
• Stunning flagship carbon mountain bike fork with 7075 Al steerer, carbon fiber tube stanchions and forged 6061 Al dropouts
• This fork is disc brake specific and has a Post Mount
• Rigorously tested to EN and DIN standards
• Recommended rider weight limit: 97.5kg (215lbs)

User questions & answers

Question:	Made for all wheel sizes
Answer:	Hi, thank you for your inquiry. The diameter of the mounting holes is about 0.24" and the screws for installation are also included. Should you have any further question about this product, please kindly contact us at [email protected].
Question:	Is this quick release
Answer:	Hi, the maximum support weight of this bracket is up to 450 lbs. This bracket is durable and could be use as workbench, folding desk, table. Should you have any further question, please kindly contact us at [email protected].

• ● Universal：Design for all kinds of bike(ebike,MTB).Suitable for 24-29 inch wheels,for tyre width from 1.50" to 2.35". No worry for your back wet.
• ●Simple & Effective - Bike fender can prevent splattering and flying debris from the front wheels, keeping you and your bike clean, available for most bikes.
• ●Durable & Light-weight : Environmental material tail TPE soft rubber,which has strong elasticity, soft and flexible,UV resistant, increased service life,Good toughness, can twist continuously.
• ● Compactable for rear rack : No need to worry you can not fit rear rack anymore,give your more options while using the mudguard.
• ● Quick-release installation:Easy to mount the mudguard.(make sure your front fork has a hole,seat post is circular tube).Besides,you can adjust the mudguard at any angle according to your requirement.

User questions & answers

Question:	Will this work on a huffy parkside se bike
Answer:	Katxa, yes there are pre-drilled holes, so you can mount to any flat surface. You can make a DIY rack for your truck bed, and you'll be able to easily transport your bike.Thank you
Question:	Will this work on a huffy parkside se cruiser (27.5 wheels
Answer:	It is the fork on your bikes front that fits on the block. Yes, I think it should fit. That said, I have only used it for my hybrid and road bikes. Makes an awesome bike rack in the back of my truck.
Question:	Can you pivot the back/front fender up and down to adjust where it needs to go
Answer:	Aluminum
Question:	Can I just purchase the front fender, as I already have a rear fender? Thanks
Answer:	There are 3 holes each one 1.5 inches apart center to center. The two outside holes are 5/8 inches from the edge and the entire unit is 4.5 inches wide. Hope that helps.

Product features

Suitable for 24',26',27.7',29' MTB

Size:

Length: Front:660mm/25.98inch Rear:550mm/21.65inch

Width:50-88mm/1.97-3.46inch Weight: only 204g/0.45pound

Front mudguards: Two clamp options:

• 1.Can be tightly mounted by mental screws/clamp.(Suggested.)
• 2.Quick-release plastic clamps,easy to mount.

How to mount it? :You can watch our video on this page,easy to mount.

Fits for suspension mountain bike, front fork hole diameter is 19-35mm(0.75-1.38 inch).

We also attach two rubber adapters for other small bike hole,you can choose to use it or not.

We suggest you insert the front mounting clamp to the top of the front fork hole,and then tighten the screw,so the front fender won't easily ratate while riding.

Rear mudguards:

• Quick-release design,easy to install.

Fast mounting,easy to install.there is TPE plate inside the clamp,it is sofer compare to normal plastic.Since it has high shock absorption, reducing the gap between the seatpost and the fender,ensure you can ride safely.

Different mounting methods

Good Material

LCY PP + TPE

Made of Taiwan LCY PP, high-elasticity,durable.

Gray TPE

Not easy to be deformed.The rubber won't loose even under high pulling pressure.

Quality Product

We keep focusing on quality control,offer you better riding experience.

Logo on the mold,so it will fade away eevn you use it for many years

Compatable for rack

Still afraid that you can't use fender and rack together?

You got us !

Perfectly match your MTB: Suitable for 24',26',27.5',29' MTB (Tire width 1.5-2.35')