10 best hydration bladder system

• LARGE OPENING FOR EASY CLEANING & FILLING – Our hydration bladder has one of the largest opening on the market. The big opening makes for easy pouring of water. It is also fairly wide for a hand or bottle brush easily access to the interior hydration bladder. The 4” screw on cap goes on and off easily. For cold water, simply add ice cubes directly from a scoop or refrigerator ice dispenser. The smooth inner of water reservoir promotes health and is easy to clean.
• PREMIUM QUALITY – The whole hydration bladder is made of premium material. CHERAINTI water reservoir is taste free, BPA free, SGS certified and 100% food grade. This tested to comply with international safety standards. It won’t leave a bad taste in your drink. The water bladder passed pneumatic pressure test, it is pressure-tolerant. Double sealing side technique has greatly improved durability. Might be the most rigid hydration bladder on the market.
• REMAIN PEFECTLY HYDRATED – This 2L water reservoir can withstand temperatures from -20 to 50 degrees Celsius. The tube resists temperature changes in hot and cold weathers. L 14.2'' x W 6.8'' hydration bladder is compatible with most hydration packs. The tube (0.4” diameter, 40” long) provides a wholesome flow for easy drinking, keeping you hydrated when biking, cycling, hiking, or running!
• 100% LEAKPROOF – You won't be slowed down with our high flow bite-valve. Simply bite the mouthpiece to suck water. Soft mouthpiece with easily accessible ON/OFF valve prevents leakage. It also has a cover to keep dirt out. Conveniently control the water flow by biting, when not bite, the water will not leak out. Quick-release tube is detachable. Auto shut off while the tube is removed, the hydration bladder will stay filled non-leaking. store neatly in fridge/icebox without tangling hose.
• GET A FREE ITEM and MONEY BACK GUARANTEE – Upon placing your order, you will get a magic bandana at no additional charge. Your purchase is backed by our 100% REFUND PROMISE. If you are not absolutely happy with your purchase of the hydration bladder for any reason, simply send it back for a full refund or to get a new replacement. No questions asked!

User questions & answers

Question:	Will this fit in a Lobo pack
Answer:	I not sure, it looks like it would a little tight, I have the iPhone 11 and its a snug fit
Question:	Can this be put in the top rack of the dishwasher
Answer:	No, but there are several places a hand gun would fit. You would have to use a buckle or zipper to get to it.
Question:	How do you recommend this being washed? I just received this today
Answer:	I believe so! My iPad measures 11 1/2 inches, from bottom left to right top corner. It fits perfectly with a little room to spare! Hope this helps. 😊
Question:	How exactly does it work? I should put it inside the backpack? Can it be used in any kind of backpack
Answer:	Yes, perfect size for kids.

Product features

FOOD GRADE MATERIAL

Made from food grade PEVA material and certified by FDA and SGS, this water bladder is BPA free, with no chemical taste or weird flavors, just provide you with a pure and clean drinking experience. Adopted the high frequency welding technology, CHERAINTI hydration bladder is designed with double sealing lines to ensure the 2L hydration reservoir is pressure tolerant and leak-proof.

2 ORIENTATION HANDLES

CHERAINTI hydration bladder designed the screw cover with 2 handles. One big handle is for easy hold with hands, the other handle is suitable for hanging in the backpack, and it suits most backpacks. Besides hydration, water reservoirs may be used for washing dishes or equipment. Therefore, you can suspend the water bladder from a high place like a tree branch to get water flow out.

LEAK-PROOF LARGE OPENING

The 2 liter hydration bladder comes with a wide and large opening, which makes it really easy to collect, fill and refill, and even drain to keep away from bacteria and mold growth. You can reach the inside of water bladder for thoroughly cleaning. It is also convenient to fill in ice cubes to keep water cold. The screw cap closure is water-tight and leak-proof. So no need to worry about the leakage.

DETACHABLE HOSE

Thanks to the pushing and release hose mechanism, the water reservoir will not leak with hose attached or disconnected. When filling in water, you will find it more convenient to disconnect the detachable hose.

LEAK-PROOF MOUTHPIECE

There is a push/pull valve on the water bladder to against leakage when at off lever. You can bite the mouthpiece to get water out or use just one hand to squeeze it. The easy flow bite valve provides a big and smooth flow.

DUST COVER

There is a connected strip between the cover and valve, hence you won't lose the cover by accident. When the water reservoir is not in use, the durable mouthpiece cover protects the bite valve against dirt and damage.

USER TIPS FOR CHERAINTI HYDRATION BLADDER

• HOW TO CLEAN

Step 1: Fill the hydration bladder with warm water, half a teaspoon of bleach and two tablespoons of baking soda. Shake, close, then let it sit for 30 minutes or so.

Step 2: Dump out the cleaning solution, rinse well, flush the hose, prop the water reservoir open and hang it to dry.

• HOW TO SUCK FOR WATER

There is an "on" and "off" bottom on the mouthpiece. If you put it "off", water can't get out. Please also bite while suck the mouthpieces .

• 100 ounce/3 liter capacity
• U.S. Army Issue

User questions & answers

Question:	What is the small clip that came on the hose used for? Can’t figure it out
Answer:	It does not. It keeps your spine cold for a little while. That's about all it does for your spine
Question:	Is it the ACU color or coyote
Answer:	I have attached on my plate carrier with voodoo tactical 2/2.5 bladder holder. Found on Amazon for around $15. This bladder fits in it well. Nice cheap additional 2 Liters.
Question:	Will this fit the eagle industries molle ii hydration carrier in ocp? is there a coyote version if so
Answer:	I don't know what they claim for the material; all I know is that it smells & tastes VERY strongly. Couldn't eliminate the problem with multiple washes. Threw it away, made me sick to drink from it.

Product description

Professional military Hydration Bladder, made of Eco-friendly material



Eco-friendly material has the following advantages:

No plastic taste.

High-grade environmentally friendly material profiles. With super toughness,

abrasion and heat resistance characteristics.



Very easy to use. Suitable for all kinds of hydration pack bag.



Mouthpiece with a valve switch, to prevent leakage. Just pull out the water switch , unplug the cap,

then gently bite the mouthpiece of the pipe, there will be fresh water injecting to your mouth.

Large opening for easy cleaning inner surfaces, easy to fill water and ice.



Product Details

2 pack(Blue and Army Green)

Capacity/SIZE: ¡õ 70 oz / 14.17'' * 6.69''

PVC Suction pipe: Length 39.5 inch

Large Openning and Small Openning Weight: 170 g



Use Range:

Bike trips, camping, hiking , Running and other outdoor sports.



Note£º



Hydration Bladder can not be loaded beverage, wine, milk and so on. Before first use Hydration Bladder,

Can withstand the water temperature range: -20 to 50 degree Celsius.



Buy with confidence with our no-questions-asked 60-DAY FULL REFUND Guarantee. We take pride in providing an awesome customer support! No issues go unaddressed!

• Super affordable package - Place an order, you can get 2 water Bladder. Package contains: 1 piece blue hydration bladder and 1 piece ArmyGreen hydration bladder .
• PREMIUM QUALITY - Hydration bladder is made of thick premium quality flexible material.. Our water bladders passed pneumatic pressure test, It is completely pressure-tolerant and leak proof for carefree biking, running, hiking and other outdoor adventures!
• QUICK RELEASE TUBE WITH SHUTOFF VALVE - Our bladder system has quick release auto-lock system that prevents leaking when tube is detached and allows the tube to be easily disconnected from water reservoir for filling, cleaning and storage.
• A PERFECT MOUTHPIECE ¨C You won't be slowed down with our high flow bite-valve. Simply bite the mouthpiece to suck water. Soft mouthpiece with easily accessible ON/OFF valve prevents leakage. It also has a cover to keep dirt out. Conveniently control the water flow by biting, when not bite, the water will not leak out. Quick-release tube is detachable. Auto shut off while the tube is removed, bladder will stay filled non-leaking. store neatly in fridge/icebox without tangling hose.
• LARGE OPENING & EASY TO CLEAN AND FILL: The big opening makes for easy pouring of water. It is also fairly wide for a hand or bottle brush easily access to the interior hydration bladder. The 4¡± screw on cap goes on and off easily. For cold water, simply add ice cubes directly from a scoop or refrigerator ice dispenser.

User questions & answers

Question:	Will this work in a tactical vest
Answer:	Yes, There is a cover on the mouthpiece.
Question:	Are the bladders made out of tpu or peva? if neither, can the seller please specify the material
Answer:	No rinse it out before use
Question:	Will it damage it if something like Sprite is in it
Answer:	Made in china
Question:	I can't unscrew the top fill area? Has anyone else had this problem?im turning it clockwise and it won't budge
Answer:	Yes, they can be removed. The mouth part pulls off and the bottom part had little buttons to compress.

• 🌟【Conveniet to Use】Compatible with our plumbing conversion device. You can drink water without having to take the bottle out of your backpack.
• 🌟【Easy to install】Just remove the cap from your water bottle and screw this on the bottle. They can turn any water bottle into a hydration system, so that you don't need to remove your water bladder from hydration pack for refilling.
• 🌟【Food Grade Materail】The drinking water pipe adopts food grade TPU polyether, and the inner tube adopts food grade PE. Hose Length: 90cm / 35.4in.
• 🌟【90 Degrees Design & Leakproof】In line with the tap ergonomic, pulling 90 degrees to nibble it to suck in water. No risk of reservoir breakage or leaks inside your backpack
• 🌟【Great for outdoor activities】Come with a storage bag for easy carry. Suitable for trekking, fishing, climbing, hiking, hunting, rafting, canoeing, boating, kayaking, etc.

User questions & answers

Question:	Does the cap have a built in check valve so the bottle doesnt collapse when you drink through it
Answer:	It must. Bottle doesn’t get squished until the very end of your water supply.
Question:	Does it fit 1 liter bottle
Answer:	It fits our one litter life water water bottles with no adapters. It does come with some adapters for different water bottles, but we haven't had to use any of them yet-worked with how it was packaged.
Question:	How is the air going to get into the bottle when you drink? Wont it just be hard to suck the water out? I want to use with smart water bottle
Answer:	It works really well, after a few times drinking from it I would just unscrew the cap and let air in.. it doesn’t get hard to drink just squish’s the bottle a bit. It worked for me on a week long hike with no real issues
Question:	How long is the tube that goes inside the bottle? And is there a way fir it to let air in so the bottle doesn't collapse on itself
Answer:	It reaches the bottom of a litter size life water bottle, which are tall and thin, about 10 1/2 inches tall, with tube length to spare. The life water bottles are more rigid plastic so haven't tried it with the more flexible plastic bottles. There is a small hole in the cap that screws onto the water bottle which should help avoid a suction. We also like that there is a cover for the mouth piece, many water bladder hoses don't provide that, which helps keep the mouth piece clean. We reuse our water bottles for hiking for 4-H and Boy Scout activites, a nice alternative to using a water hydration bladder, since the bottles are sturdier then a bladder.

Product features

The innovation of drinking water means that almost all bottles become professional drinking water hydration reservoir system under simple steps.

Specifications:

• Material: TPU
• Hose Length: 90cm / 35.4in
• Pouch Size: 18.5 * 16cm / 7.2 * 6.2in
• Weight: 76.5g / 2.6oz
• Package Size: 34.5 * 21 * 4cm / 13.5 * 8.2 * 1.5in
• Package Weight: 152.5g / 5.3oz

Conveniet to Use

Compatible with our plumbing conversion device. You can drink water without having to take the bottle out of your backpack.

Easy to install

Just remove the cap from your water bottle and screw this on the bottle. They can turn any water bottle into a hydration system, so that you don't need to remove your water bladder from hydration pack for refilling.

90 Degrees Design & Leakproof

In line with the tap ergonomic, pulling 90 degrees to nibble it to suck in water. No risk of reservoir breakage or leaks inside your backpack

Package List:

1 * Water Bottle Hose

1 * Storage Bag

Great for outdoor activities: Suitable for trekking, fishing, climbing, hiking, hunting, rafting, canoeing, boating, kayaking, etc.

• COOLING MISTER: We go beyond simple hydration and keep you cool with a cooling mist pump. Keep refreshed and stay in the zone with a refreshing mist. Control your mist with a rugged remote that clips to your backpack.
• UNIVERSAL: Upgrade your hydration backpack to spray a cooling mist in minutes! This system works with any water bladder or reservoir and leaves the drinking hose intact so you can mist and drink. The power bank battery can even be used as a phone charger.
• EVERYTHING YOU NEED: This lightweight kit includes our water atomizing compact PCS pump system with rechargeable battery and charging cable. A rugged clipable remote control delivers mist whenever you need. We include all the fitting and tubing you need for setup.
• THE BEST IN FITNESS: Mister Backpack Kits are the perfect gifts and gear for cyclists, runners, climbers, hikers, and more. Stay cool, comfortable, and hydrated during running, cycling, rock climbing, bike riding, kayaking, hiking, biking, or whatever your adventure is.
• BEAT THE HEAT: ExtremeMist is based out of Scottsdale, Arizona where staying cool and hydrated is vital. We've created the highest quality, most comprehensive personal cooling and misting equipment available. Stay out longer and recover faster with ExtremeMist.

User questions & answers

Question:	How fast does this use up the water in an average sized water bladder on a medium setting
Answer:	Hello, Water consumption is only about 1.5 to 2.8 cups per hour of continuous use. Make sure when you buy, go to "New (2) from $119.00" and select "Shopena-Inc". If you buy from us and send a message right after, we can give you a free water bladder cleaning kit with your order! -Ashley
Question:	Does this require a hydration pack to use it and does it come with one
Answer:	Hello, Thanks for the message. The system takes water from a source (usually a hydration pack) & then pumps it into a hose that makes a mist. A hydration pack is not included in this item. We do have the one with the hydration pack for $189.00. If you want it please get in contact and i can show you how. This is our Amazon store contact link. https://www.amazon.com/hz/help/contact/A33FNSZ9JX0F51?marketplaceID=ATVPDKIKX0DER&sellerID=A33FNSZ9JX0F51&_encoding=UTF8&ref_=v_sp_contact_seller&
Question:	Will this work in high humidity climates? I've tried other misters and they just end up getting everything wet
Answer:	The Extreme Mist uses a finer point nozzle at a higher pressure than a hand-pumped product, therefor a finer mist. At any humidity level, it still delivers better than other products I've used, especially cute little plastic toys. However, I have found that temperature combined with humidity require one particular thing to be truly effective - high volume air flow past the wetted area. Sitting still getting wet without fan-driven air is futile.
Question:	Is it possible to disconnect the tubes once all hooked up and then reconnect again
Answer:	Hi Brionna, Thanks for reaching out! Yes, this is possible. You can watch our Instructional Videos on this link: https:// www.extrememist.com /pages/ how-to-install Best, Extreme Mist

Product features

Upgrade your Gear!

This retrofit kit can be installed in your favorite hydration pack – leaving the drinking hose intact for dual use. The kit includes everything you’ll need to head out into the heat.

Rechargable PCS Pump and Wireless Remote Control

Chest Clip to keep hose in place and Wall Charger

Mist Nozzle with all necesarry install parts and 52 inches hose

Step-by-step instruction manual printed and electronic versions

PCS Features:

Water Usage:

Lowest Speeds - 1.5 to 2.5 cups/hour

Medium Speed - 2.5 to 5 cups/hour

Highest Speed - 5 to 6.5 cups/hour

Weight: 16 oz

Measurements: 7.5'' H x 3.5'' W x 1.5'' D

Product description

The original Platypus water reservoir that became a backcountry classic, the Platypus Hoser Hands-Free Hydration System Reservoir is an ultralight, minimalist hydration system that delivers taste-free hydration with a versatile, durable design that makes it great for backpacking, thru-hiking, and day hikes. Offered with or without the Fast Flow Valve, the self-sealing HyFLO bite valve delivers a 30-percent increase in flow rate, making it quicker and easier to hydrate on the go. An integrated hang/carry loop makes it easy to secure the reservoir in a backpack or elsewhere. The Hoser is taste-free, BPA-free, BPS-free, phthalate-free and features embedded silver-ion to protect the reservoir from mold and bacteria. The outlet on this versatile reservoir also accepts any threaded Platypus drink tube or closure cap. The Platypus Hoser Reservoir is available in 4 sizes: the 1.0-Liter measures 5.25 x 11.5 inches and weighs 3.2 ounces, the 1.8-Liter measures 7.75 x 11.5 inches and weighs 3.4 ounces, the 2.0-Liter measures 6 x 16 inches and weighs 3.6 ounces, and the 3.0-Liter measures 7 x 16.5 inches and weighs 3.8 ounces. Manufacturer’s limited lifetime warranty. Made in the USA.

• Ultralight taste-free, minimalist reservoir with high flow rate for hydration on the go while backpacking, thru-hiking, and day hiking
• Simple, one-piece, self-sealing HyFLO bite valve makes it quick and easy to hydrate hands-free with a 30% increased flow rate
• Hang/carry loop easily secures the reservoir in a backpack or elsewhere; outlet works with all threaded Platypus drink tubes and closure caps
• The Hoser is taste-free, BPA-free, BPS-free, and phthalate-free; features embedded silver-ion to protect reservoir from mold and bacteria
• 1.0-Liter measures 5.25 x 11.5 inches and weighs 3.2 ounces; manufacturer’s limited lifetime warranty; made in the USA

User questions & answers

Question:	Is the diameter of the tubing 1/4 inch
Answer:	The drink tube measures 40 inches long and is .25 inches in diameter.
Question:	how do you keep the tubing from getting moldy
Answer:	Use hot, soapy water and rinse thoroughly with hot water. For tough cleaning jobs, add 1/4 cup of baking soda to 3/4 cup of water per liter volume of your bottle or reservoir and shake for 30 seconds. Add 1/4 cup lemon juice, shake 10 seconds, and vent by loosening cap away from face. Repeat shaking and venting three times. Expel as much air as possible, cap bottle, and allow to soak 20 minutes. Rinse three times with hot water. Caution: When adding lemon juice to baking soda, effervescence occurs and will cause pressure to build in a capped Platypus product.
Question:	Does the 3 liter bladder come with a cap or just a hose
Answer:	The hose doesn't have a cap at the end, but the water only comes out when you bite on the mouth piece.
Question:	is this meant to be used over and over again even though you can't scrub the inside
Answer:	Yes you can use Platypus over and over again. While hiking Appalachian Trail, GA to Tenn Section,I used a 1L Platypus only to get water from streams and used a Sawyer Squeeze filter into a2L Platypus and sometimes questionable water after filtering it, I would use AquaMira proceduresinto my 2L Platypus. After my hike, when I return home, I used 2 AquaMira treatments in all myPlatys, leaving the treated water in the Platy for 24 hours at a time, after 2 treatments, thenset in window seal with no cap to dry over several days.http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=aquamira&rh=i%3Aaps%2Ck%3AaquamiraAquamire Instructions for use:==============================Start with a clean water bottle or container that has a lid.Fill the bottle or container with water.Remove the mixing cap from solution A.Put 7 drops of solution A into the mixing cap.Put 7 drops of solution B into the mixing cap.Let the two solutions mix in the mixing cap for five minutes. The solution will go from clear to fluorescent yellow.Pour the mixed solution into a quart or liter of water you collected in a bottle.Put the lid on your water container and shake or stir it.Wait 15 minutes for the chlorine dioxide solution to disinfect the water.Drink!

Product description

3L Tactical SOURCE Hydration SystemHigh performance 3L hydration reservoir system. Exclusive 3 layer coextruded Polyethylene construction with Taste-Free, low maintenance, Glass-Like liner. Integrated Grunge-Guard antimicrobial.Further Information on SOURCE Hydration TechnologyTaste-Free System Glass-Like Liner technology in reservoir and tube delivers pure liquid taste with no plastic flavor.Bacteria-Free System Grunge-Guard Antimicrobial technology blocks bacterial growth for the life of the system.Technologie Glass-Like A multi-layer Polyethylene film utilizing SOURCE's Glass-Like technology, which prevents bio-film build up making the system self-cleaning. SOURCE's Glass-Like Film is 2000% smoother than standard TPU films, with virtually no difference from glass itself.Care-Free System Glass-Like Liner with Grunge-Guard antimicrobial technologies eliminates the need for cleaning. For days, weeks and even months of use simply refill and drink again and again with no special care required.Widepac Wide Opening Access Patented slide closure for easy filling, draining and cleaning. Airtight Seal! (U.S. Patent No. 7,648,276,B2)Specs WXP 3LLiquid Capacity: 3L/ 100ozHydration System: WXTube: Tube Cover 94cm/37in longPE Valve: Angled Storm-ValvWeight: 0.24kg/0.53lbsReservoir: 435 micron co-extruded Glass-LikeDimensions WXP 3LEmpty:Length 17”/43 cmWidth 8”/20.5 cmMax. Depth 1”/2.5 cmFull:Length 16”/41 cmWidth 5.9”/15 cmMax. Depth 3.7”/9.5 cm

• Patented leakproof wide slide opening for easy cleaning, draining, ice insertion
• Tube Cover Insulates and blocks UV-light. Water stays cool and bacteria free from first to last sip
• QMT Source Quick Mate Technology hose fitting offers push button convenience, no leakage, offers click-in compatibility with USMC Miox filter system
• Patented push/pull Storm Valve requires no biting, delivers 25% higher flow than bite designs. Integrated valve shut-off
• Covered tube with dual quick disconnect valve.

User questions & answers

Question:	Could this fit in the lancer tactical lightweight hydration pack
Answer:	You may have to fold it if it isn’t big enough.
Question:	Hi. the description says it comes with the storm valve. when i received it, this piece was missing. how do i request the item
Answer:	So your saying it just leaks out the end?
Question:	What is the empty size of the 2L bladder
Answer:	I don't know that Source makes a 2L hydration bladder. Having said that, the 3L bladder = 100 fluid .oz and the bladder is 8.2" wide, 16.1" tall.
Question:	does water flow from the storm valve without sipping? I want to be able to put water in dog bowl or let flow into dog's mouth without him touching it
Answer:	If the valve is lower than the valve, if it's a bite valve and you squeeze it, some will flow. If you crack the seal on the top, or squeeze the bladder, more will flow. In other words, you'll almost for sure have to take it out of your pack to get the drop you'll need, unless you squeeze the bladder somehow in your pack. When I am cleaning mine, I have the top open and squeeze the bite valve, and with the valve all the way down, the water flows like gangbusters. Yes. It will work one way or another.

Product features

Source Tactical WXP 3-Liter Hydration Reservoir with Storm Valve

WXP Hydration system featuring wide slide opening and screw-cap opening to give you all the options for filling, re-filling, drainage and cleaning. Our high-flow Storm Valve provides hydration on the move.

Low maintenance and zero taste

SOURCE Hydration Systems are low maintenance and taste free thanks to SOURCE hydration technology.

Weave Tube Cover

Weave Tube Cover insulates and blocks light. Water stays cool and prevents dirt from first to the last sip.

SOURCE Storm Push-Pull Valve

Our SOURCE Hydration Hi-Flow Storm-Valve is a no-bite push-pull valve with integrated shut-off mechanism. Like drinking with a straw. Easy disassembly for cleaning.

Wide Slide Opening Access

Patented leakproof wide slide opening for easy cleaning, draining, ice insertion

Widepac Closure

The patented (U.S Patent No. 7,648,276,B2) user-friendly, airtight Widepac Slide Closure opens wide, allows easy filling, cleaning, draining, and ice insertion.

Taste-Free System

Source's co-extruded PE film retains the pure taste with absolutely no plastic flavor over time.

GrungeGuard Technology

Inhibits dirt on the reservoir and drinking tube for the life of the system.

Easy Care, Low Maintenance

Simply refill with water and drink again and again without special care. Water will remain fresh for days and even weeks.

Product description

US Military Army MOLLE II ACU Digital Hydration System Water Back Pack Carrier with 100 oz 3 L Bladder by US Goverment GI. Condition: New. The set: carrier and bladder, both are brand new. The set comes with 1 ACU and 1 standard US Velcro Flag also! Made in USA! Genuine US Military Issued! Designed to keep cold liquids cold, 3 liter (100 oz) reservoir ready. Width at the bottom is 7". Height in the middle is 15.5". This is the official "issue" hydration system which the Army distributes to deploying units, in addition to the MOLLE Rifleman Set and other items in the RFI ensemble. Durable Nylon Cordua Fabric.

• New ACU Digital Hydration Carrier with Bladder 100oz 3 L
• Brand New Carrier and Bladder!
• The set comes with 1 ACU and 1 standard US Velcro Flag also!
• This is the official "issue" hydration system which the Army distributes to deploying units, in addition to the MOLLE Rifleman Set and other items in the RFI ensemble.
• Issued by the U.S. Government! Made in USA!

User questions & answers

Question:	Is this made in USA
Answer:	Yes. All gear made for the US Military is made only in the USA. That’s why in my description it says “made in USA”
Question:	Is there a trick to geting water out of the valve? Biting isn't working for me
Answer:	Bite down to open the valve and suck just like a straw.
Question:	How does the bladder come out? I cant seem to get it out
Answer:	First unscrew the cap and remove it and the piece holding it on to the bladder by gently pulling the ring off. At the top of the holder there is a flap that can be pulled back to reveal the inside of the holder and the bladder itself. You'll need to thread the drinking tube out and then you should be able to just pull the bladder out through the flap on top.
Question:	Is the water bladder bpa free
Answer:	I dont know doesnt say

• EXCELLENT QUALITY MATERIAL:Our water bladder for hydration pack is made from Premium Ultra-Durable field tested materials.13.8* 6.7 Inch Hydration bladder is compatible with most hydration packs.
• LARGE CAPACITY SUPPLY:2 liters water backpack supplying you with cold water for a minimum of 4 hours,SKL Hydration water blader are the perfect solution for running,cycling,biking,hiking,climbing,skiing or hunting.0.6mm extra thick liner is pressure-tolerant and wear-proof;double soldering sealing side technique has greatly improved durability.
• Upgraded :Our bladder system has quick release auto-lock system that prevents leaking when tube is detached and allows the tube to be easily disconnected from water reservoir for filling.
• The QUICK RELEASE TUBE:It equipped with a High-Flow soft bite mouthpiece for easy drinking and a dust cover that prevents the dust & dirt from reaching the bite valve.
• Satisfactory Customer Service:Any questions please feel free to contact us 7*24 hours,it's our goal to offer the BEST customer service on Amazon!

User questions & answers

Question:	How do you effectively dry it out after cleaning
Answer:	Dry with a cloth after cleaning and leave to dry in a ventilated place
Question:	Does the bladder leak in this water bag?I'm very worried about that
Answer:	I used it for a period of time and found that the quality was very good and there was no leakage
Question:	Does water leak out if u take off the tube
Answer:	Not that I am aware. We had a problem getting the water out of the tube for use. We returned the entire set-up as it is unusable.
Question:	How long is the tube
Answer:	I don't have a tape measure with me, but I just hiked the grand canyon with it today. Average size guy- a little tubby. It reaches all of the way out of the pack & down to my bottom rib. Whoever designed it did it right. It's long enough to drink from, or to share.

Product features

Account Manager Reminder:

The hydration bladder nozzle is leakproof. When the hydration bladder does not produce water, pay attention to check whether the switch is turned on, and turn off the switch after use to avoid water leakage.

Important Notice:

The temperature of the water should be between -20 and 50 degree Celsius. Hydration bladder bite valve cannot hold juice, milk, soft drink, liquor, etc.

Please soak the bladder for one hour in the warm salt water about 30-40 degree Celsius before using.

Make sure it is completely dry, inside and outside, before storing.

Avoid contact with extreme heat/cold, harsh chemicals, UV light and sharp objects, these elements will damage the hydration pack replacement.

Tips for Usage

Before drinking, you should pull the mouth piece and bite to suck the water.

As long as you screw the cap tightly, it won’t leak even moving in the hydration backpack.

Product description

The LA Police Gear 1L Hydration Bladder System includes a hydration bladder and insulated tube with bite valve. Just fill with water, stick it in your pack, and you're ready to go! The hydration bladder has a large screw cap opening that allows for easy filling, cleaning, and the ability to add ice. The bladder is double sealed and has an auto-shutoff valve to prevent leaks. It has a handle for easy transportation while filling up and cleaning. The tube has an insulated sleeve to keep help keep your water colder for longer.



Features:



- Capacity: 1 Liter

- Dimensions: 6.5" x 13"

- Anti-Microbial

- Double Sealed

- Bite Valve Dust Cover

- Insulated Tube

- Leakproof Connections

- Large Screw Cap

- Wide Opening

- Easy Filling, Easy Cleaning, Easily Add Ice

- Auto-Shutoff Valve

• Capacity: 1 Liter | Dimensions: 6.5" x 13"
• Anti-Microbial
• Double Sealed
• Insulated Tube
• Wide Opening