11 best rv bike carrier

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The XC Cross-Country 2-Bike Hitch Mount Rack from Swagman is a versatile hitch-mount rack that can easily accommodate children's and adult bikes, downhill bikes, cruiser bikes, full-suspension bikes, BMX bikes, "Y" frame designs, and much more (and without the hassle of removing wheels). The XC slides into a two-inch receiver and carries up to two bikes.

Swagman's XC Cross-Country 2-Bike Rack easily adjusts to accommodate a wide variety of bike frames.

The XC easily adjusts to different bike frame sizes with the simple movement of the wheel hoops. Its frame grip arms feature a soft, frame-friendly coating to protect your bike's finish. When not in use, the rack folds up for easy storage.

Specifications:

• Capacity: Two bikes
• Mount: 2-inch hitch
• Hitch: Fits Class 3 hitch

• EASY TO ASSEMBLE & USE: Only takes a few minutes to assemble and the upright ratchet arms easily adjusts to different bike frame sizes, will accommodate bike frames up to 59 cm (23.2")
• KEEPS YOUR BIKE STABLE: Sturdy design includes a built in anti-wobble hitch device to keep bikes in place
• SAVES YOU STORAGE SPACE: Rack folds easily in to compact mode so that you can conveniently store when done using it
• VERSATILE: Easily transports up to 2 bikes and is compatible with 1-1/4" and 2" receiver Hitch. Maximum weight capacity is 35Ibs per bike and fits 20" to 29" tire sizes
• ACCESSORIES SOLD SEPARATELY: Fat tire wheel trays (64674), 1/2" Locking Hitch Pin (64029) or 1/2" Locking Hitch Pin and Security Cable (64031)

User questions & answers

Question:	Do I need to buy a torque wrench to be able to get the rack tight on the hitch
Answer:	Fits any vehicle with a 2 inch hitch
Question:	we have a 5th wheel camper with a 2" receiver hitch mounted on the frame not the bumper. Will this rack work for us
Answer:	Could you please measure the length between the round tube interface and the end of the spare tire？This part of our carrier is 8inch. If longer than 8inch, it’s necessary to install a extender. And our carrier can fit 2" hitch receiver (tow bar). If you have any other needs, please visit the IKURAM web site and contact us. I will send picture to help you solve your problem.
Question:	Does it have a locking mechanism
Answer:	As long as it has a 2 inch receiver
Question:	I have a Toyota where the spare is mounted on the back. Will this work with the spare tire in place
Answer:	I'm going to answer this as Best I can without getting Angry . First off - The Bike Rack has a 2 Inch Mount and your going to try and plug it in to a 1 1/2 " Receiver . Think about that for a moment ..... It's a NO

Product features

XC2

This bike carrier provides a stress-free way to transport your bikes. Each bike is secured at both wheels and at the frame providing a more stable and safe ride. Cushioned hooks are adjustable for different sized bikes and ratchet down for a tight fit.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

• RV APPROVED: The TRAVELER XC2 works well with various sizes of trailers & campers
• EASY TO ASSEMBLE: Only takes a few minutes to assemble following the instructions.
• CONVENIENT: Once installed, simply load your bikes and you are ready to go! When not in use you can fold the upright bar down to give access to the rear of the RV
• STURDY: The light but sturdy design keeps your bikes in place, even on the those long journeys!
• VERSATILE: Easily transports up to 2 bicycles and is compatible with a 2" Class 3 hitch receiver or mounts to a 4.5" continuous steel welded RV Bumper Adapter. Also comes with a 2" Bumper Adapter.

Product features

Swagman Traveler XC2

The best value RV approved bike rack made to haul your bikes behind your RV, 5th wheel or trailer.

Swagman RV products are put through rigorous testing program to ensure they can handle the extra stress of being towed behind an RV. You can be confident the Traveler XC2 will provide the ultimate in reliability getting your bikes to their destination safely.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The 4-Bike RV Bumper Rack provides an easy solution for carrying the whole family's bikes on the back of an RV. The sturdy rack mounts onto a 4 to 4.5-inch continuous, welded steel bumper and provides a platform where you can stand your bikes. The rack boasts solid steel construction and offers a weight capacity of 30 pounds per bike.

The RV Bumper Rack provides a stable platform to stand up to four bikes.

• Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing
• Simple to use and supports various bike sizes, frames and wheels

User questions & answers

Question:	Rv dealer installed, bikes won't fit. Racks maybe to far apart
Answer:	You would have to loosen the bolts and push the bike racks closer together. If you have different size bikes, use the largest one to for fitting. Then retighten the bolts to the bumper.
Question:	How low, will it drag or bottom out while pulling into parking lots,etc
Answer:	We travel a lot and this was never an issue!
Question:	Does this work with a pop up camper
Answer:	You need a strong bumper. Most pop ups are lightweight, and probably don't have one that will work. If the bumper is 1/8th steel or aluminum with strong welds to the frame it could work. It needs to support roughly 150lbs.
Question:	What to do if it is damaged during transportation
Answer:	Be more careful next time

Product features

Carry 1 to 4 bikes easily

Simple and easy to use you will want to take this bumper rack with you on all your road trips. Not for use on aluminum or spot welded bumpers.

Distance from bumper to end of rack: 34". First bike sits 4-3/4" out from bumper.

Simple yet packed with features

• Transports 1 to 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.
• Simple to use and supports various bike sizes, frames and wheels.

Specifically conceived for RV

The Swagman RV bumper rack will safely transport your bikes behind your 5th wheel, RV or camper trailer.

It has been specifically designed to withstand the use with such vehicle.

.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride.

Product description

Love your Cargo Caddy (CC-100) but need a secure way to attach your bikes? The Stromberg Carlson Cargo Caddy Bike Rack provides just that! The Bike Rack adapts your Cargo Caddy into a 2-bike carrier. Racks accommodate tire widths up to 2.25". Four wheel brackets, applicable hardware, and two tie down straps are included. CC-100 Cargo Carrier sold separately.

• Stromberg Carlson CC-125 Cargo Caddy Bike Rack Adapter
• Adapts Cargo Caddy (CC-100) into a 2 bike carrier
• 4 wheel brackets and 2 tie down straps included
• Powder coated to resist corrosion
• Note: CC-100 Cargo Carrier sold separately.

User questions & answers

Question:	How wide is each bracket? How many sets (or bikes) might fit on a standard cargo carrier (60x
Answer:	Brackets are 2-3/8" I.D.,I have the largest tire available for 29ers and are a perfect fit.I place one bracket on each corner of my 60"X24"turned out away from cargo carrier, and transport two 29er bikes.I turn handlebars on bike close to vehicle for clearance.These brackets should work fine for all standard bikes,with the exception of the new "FAT" bikes equipped with 4" wide tires.I did however purchase 1/8" metal to re-enforce floor of my carrier,as it is an aluminum unit.Brackets are well made and strong.
Question:	Is this price for the platform & the racks
Answer:	The CC-125 Cargo Caddy Bike Rack Adapter does NOT include the platform. The platform must be puchased separately.
Question:	How wide of tires will fit on this rack
Answer:	Our bikes have 26 x 2.10 tires, and fit very well. I don't know if anything wider than that would fit.
Question:	I have an adult tricycle and am looking for a bike rack or caddy to attach to the back of my RV, would this bike rack accommodate an adult tricycle
Answer:	This single photo might be misleading, as it does not show the product by itself. What you get are the attachments that look similar to u-bolts. If you look closely at the back of the front tire, and the front of the back tire, you see the product. The cargo caddy (the big platform that attaches to your receiver) is not included. However, if you purchase this product and a cargo caddy, this might be a very good option for you. The key question is how wide is your bike, specifically the distance between the outside edges of your rear wheels? If you can find a caddy that will accommodate that width you may be good to go. However, you may still not have enough room to use this product on the rear wheels. You could use it on the front wheel, and use a strap to hold the rear down. If it were me, I'd use a strap to hold the front and a strap to hold the rear, and forgo using this product altogether since your tricycle will stand on its own. This product is best used for holding two-wheel bikes vertically. I highly recommend it for two-wheel bikes.

Product description

Put that RV bumper of yours to use and add some fun to your trips with the Bumper-Mounted 2-Bike Rack from Quick Products! The rack features two platforms that easily mount to your 4” to 4.5” square bumper and give you completely customizable control over the width, ensuring that your bike fits perfectly every time. Slotted tire wells hold each bike securely while a convenient stabilizer post provides an anchor to both support and fasten your bikes to. Note: Will not fit fat-tire bicycles or bicycles with wheels over 29”. Weight should not exceed 30 lbs. per bicycle. Caution: Before installation, be aware that RV manufacturers may place load restrictions on their vehicle’s bumpers. These load restrictions must be followed to create a safe RVing experience. If you are unaware of your bumper’s load restrictions, please consult your manufacturer for information to ensure safe use. Install only on continuous-weld steel bumpers.

• Conveniently carry up to two bikes from your 4” to 4.5” square bumper
• Adjustable mounting allows a fit for nearly any length bicycle
• All-steel construction, powder coated for corrosion resistance
• 30 lb. weight capacity per bicycle
• Will not fit fat-tire bicycles or bicycles with wheels over 29”
• Slotted tire wells hold each bike securely while a convenient stabilizer post provides an anchor to both support and fasten your bikes to.

User questions & answers

Question:	Will this rack hold kayaks as well
Answer:	I would not. You need the support of screws to hold the weight of a bicycle.
Question:	As this mentions, this is basically 2 racks. Are they attached to one another? What is the size of each rack? I want to use them to hold cargo box
Answer:	No, the hook cannot be changed to the other direction.
Question:	What if you had 35 lb on one of the brackets would that be okay
Answer:	Don’t know about that specific weight but I have a large mountain bike that has 29” wheels and it works fine. It comes with 4 screws to attach it to the wall. I attached my screws to the wall stud. I believe that if you do that it should be ok. Hope this helps.
Question:	Can we tow a boat trailer
Answer:	Only one set of wheels, so can set up four trays, I personally did a 4 tray in my bathroom and it’s AWESOME. one tray can be used on its own absolutely.

• ANY CAR. ANY PLACE. ANY TIME. The SeaSucker Talon Bike Rack is MANUFACTURED in the USA so you don't have to worry about durability or safety. The Vacuum Mounts NEVER damage the car and it’s 3X lighter than most hitch racks. WE VALUE YOUR PRIORITIES
• THE ONLY AMERICAN-MADE RACK AT THE TOUR DE FRANCE. The SeaSucker rack has been TESTED at the toughest races and most physically gruelling courses. We have carried well over $250,000 worth of bikes for pro cycling teams in the world. DO IT LIKE THE PROS
• YOUR NEXT ADVENTURE IS READY - Our racks are the only TRAVEL-FRIENDLY bike racks for cars because THEY FIT in a backpack, carry-on, or bike bag. The Talon ONLY WEIGHS 6 lbs, unlike the other +50 lbs racks and it mounts on ANY rental car.
• TAKE ADVANTAGE OF THE TALON. Each one of the four SeaSucker Vacuum Mounts is PULL RATED at over 210 lbs so your road or mountain bike is in SAFE HANDS. You can install them within SECONDS with minimal work and they work on the widest range of cars.
• FOR THE PEOPLE, BY THE PEOPLE. All racks are HAND-MADE and our US-Based support will help with any questions. Add one of the SeaSucker racks to cart and if you aren’t 110% satisfied with your bike rack, we will refund your purchase OR replace your rack.

User questions & answers

Question:	Are this work on fat bike
Answer:	According to the description, these will accommodate up to a 30" tire. However it will secure a gross vehicle weight of 1500 pounds.
Question:	Woiuld this work for truck
Answer:	I use four of these for a RZR utv with 32 inch tires inflated to 10 psi, works fine.
Question:	I saw that the suction last for 4 hours... what if i have a 6 hours car ride? does i need to take it off and put it again during the car ride
Answer:	I have not left my line on for extended periods of time. But you can always just loosen them when storing or until the next time. I am no longer snapping straps because of these. But you will need the hardware to install them. Not provided
Question:	Hi there I would like to know if it comes with the rear wheel cup holder
Answer:	It may work. The straps will only work for a 32” or smaller tire I believe. The weight of the truck will determine if it exceeds the rating of this item?

Product features

Specifications

• Secures 1 bicycle up to 45 pounds
• Mounts on any car, truck, or SUV.
• Attaches to roof, trunk, hatchback, or truck bed.
• Three 6” SeaSucker vacuum cups (rated @ 210 pounds of pull-strength each)
• Weight: Approx. 6 pounds
• Dimensions: 15” x 13”
• Manufactured and assembled in the USA

WHICH SEASUCKER BIKE RACK IS RIGHT FOR YOU?

TALON - 1 BIKE

The Talon is our workhorse 1-bike carrier and our most popular It’s a fork-mount-style rack, with three of our powerful (210lb pull-strength rated each) vacuum cups holding it onto your car’s roof, trunk or back glass. A Rear Wheel Strap for securing the back tire is included. Small and light enough to fit into a bike bag or carry-on luggage for you adventurous types who travel with your bikes. Probably the easiest rack in the world to install, and removes in just seconds,

MINI-BOMBER - 2 BIKES

The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6” SeaSucker vacuum mounts, this rack has plenty of muscle.

BOMBER - 3 BIKES

The Bomber is our 3-bike behemoth. It’s the biggest rack we make, and the strongest. It’s a fork-mount-style rack, with five of our powerful (210lb pull-strength rated each) vacuum cups holding it onto your car’s roof, trunk or back glass. Three Rear Wheel Straps for securing the back tires are included.

KOMODO - CONVERTIBLES

The most beautiful bike rack in the world? We certainly think so. This road-bike-specific rack is machined out of solid aluminum so that each part fits with precision. Anodized in various colors (currently available: black, silver, aqua blue, and gold). This rack is designed for sports cars and convertibles – cars that don’t have a lot of open space to attach a rack (but feel free to use this rack on any car). Minimum footprint: approx. 18″x12″

• EXTRA HEAVY DUTY: Safety is the 1st priority. The rack passed the most strict tests which include driving, pulling, vibration and swinging tests. TUV Test Standard PASSED: With 1.5 times of max load weight, no bending or cracks after testing. ( NOT for RV )
• PLATFORM CARRIER: Much Easier to put your bicycles on than clamp holder, and compatible with all kind of bicycles. The bike is securely sitting in the tire holders, so no heavy load on the top tube compared with other carriers. No more swinging handlebar and spinning wheels which may cause scratches on car or bike.
• ADJUSTABLE FOAM PROTECTOR: There's an adjustable foam protector to prevent scratching or hitting of bicycles.
• FOLDABLE: The arms could be folded for you to access the car rear boot or easy storage when not in use. 4 BIKE RACK , 2" HITCH Weight: 35.5Kg = 78.26lbs, Max Load: 20kg or 45lbs per bike.
• Lifetime warranty: We are so confident with our product quality, so we can offer lifetime warranty. If you are not happy with the products, replacement or refund could be given. Peace of mind: Our product liability insurance covers up to 2 million for each claim.

User questions & answers

Question:	If you get the 4 bike rack can it be seperated if you are not traveling with all 4 bikes
Answer:	Yes they fit 16oz solo cups
Question:	Can you make this 2 bike set up and 4 bike set up
Answer:	I don't see why not. To me, this would be small for a lake, but it is very doable.
Question:	How much does it weigh
Answer:	of course, Tips: When children play in the water, adults must accompany.
Question:	Title says 1.25" or 2" hitch but then says 2" hitch everywhere else? Can it be used in a 1.25" hitch
Answer:	Its suppose to come with rings.

Product features

4 BIKE RACK , 2" HITCH Bike Carrier

EXTRA HEAVY DUTY: Safety is the 1st priority. The rack passed the most strict tests which include driving, pulling, vibration and swinging tests. TUV Test Standard PASSED: With 1.5 times of max load weight, no bending or cracks after testing.

PLATFORM CARRIER: Much Easier to put your bicycles on than clamp holder, and compatible with all kind of bicycles. The bike is securely sitting in the tire holders, so no heavy load on the top tube compared with other carriers. No more swinging handlebar and spinning wheels which may cause scratches on car or bike.

ADJUSTABLE FOAM PROTECTOR: There's an adjustable foam protector to prevent scratching or hitting of bicycles.

FOLDABLE: The arms could be folded for you to access the car rear boot or easy storage when not in use. 4 BIKE RACK , 2" HITCH Weight: 35.5Kg = 78.26lbs, Max Load: 20kg or 45lbs per bike.

Keep Enough Space

Raised rack to keep enough space when passing speed bumps or driving on steep hills. Warning: Please do not use the rack for off road.

Secure Tire Holders

Adjustable positions ensures secure holding.

Foam Protected

Protect the frames.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from leading factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• 💫Built for 4" x 4" (and up to 4.5" tall and 4.25" deep) continuous welded steel bumpers, made from solid steel, with an easy mount bolt-on design.
• 💫U-Bolts onto a 4" square RV bumpers and accepts 2" cargo carrier tubes
• 💫For 4" square continuous welded steel / RV bumpers (Also fits bumpers 4.5'' tall x 4.25'' deep ) , Accepts a 2" Inch Tube
• 💫This RV Bumper Trailer Adapter is very durable and will never let you down. Made of rugged powder coated steel makes it very sturdy and reliable for weights up to 200 lbs.
• 💫Note: This product is not rated for towing. Only use this product for hitch-mounted, RV-approved accessories. Designed for use on continuous welded steel bumpers only, do not use on bumpers with decorative aluminum covers.

Product features

Applications, Materials and Notes

1. Premium Rv Bumper Trailer Adapter Cargo Carrier
2. Black Powder Coated Steel with Zinc Plated Hardware
3. Not Recommended for Towing Manufacturers
4. Designed for Bike Racks, Not for Towing Purposes

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The 2-Bike RV Bumper Rack provides an easy solution for carrying bikes on the back of an RV. The sturdy rack mounts onto a 4 to 4.5-inch continuous, welded steel bumper and provides a platform where you can stand your bikes. The rack boasts solid steel construction and offers a weight capacity of 30 pounds per bike.

• Transports 1 to 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing
• Simple to use and supports various bike sizes, frames and wheels

User questions & answers

Question:	Will this rack interfere with a tow bar, towing our car behind our rv
Answer:	I'm sorry, we have a fifth-wheel and I'm not familiar with the equipment needed to tow a car behind an rv.
Question:	Would it be able to carry 4 bikes of different sizes/shapes (mountain bike type and beach cruiser type
Answer:	When I searched for our bike rack there was a Swagman four bike option available. My husband and I chose the two bike version rather than the four bike.
Question:	Will this fit on the bumper with a spare tire in the middle? I have an older 5th wheel
Answer:	I have a 27' travel trailer. Had the same problem with the fit, so I had to move the spare & mount it on to the frame of the trailer right behind the hitch. Works great.
Question:	can it be when towing a car behind my Rv
Answer:	Hi, I don't tow behind my RV but I mesure from my RV to the second bike handle. It is 34 inches. Hope that help you to decide.

Product features

Carry 1 or 2 bikes easily

Simple and easy to use you will want to take this bumper rack with you on all your road trips. Not for use on aluminum or spot welded bumpers.

Distance from bumper to end of rack: 34". First bike sits 4-3/4" out from bumper.

Simple yet packed with features

• Transports 1 or 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.
• Simple to use and supports various bike sizes, frames and wheels.

Specifically conceived for RV

The Swagman RV bumper rack will safely transport your bikes behind your 5th wheel, RV or camper trailer.

It has been specifically designed to withstand the use with such vehicle.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride.

Product description

The Quick Products Economy RV Bumper Receiver Adapter turns your bare bumper into a 2" receiver, giving you the ability to add a bike rack or storage tote to your RV where you would not have been able to before. The receiver fits a 2" tube and bolts onto your existing 4 x 4.5 inches bumper. 200 lbs. tongue weight capacity. NOT intended for towing purposes.

• Bolts onto 4 x 4.5 inches bumper
• Accepts 2" cargo carrier tube
• 200 lbs. tongue weight capacity
• Not intended for towing purposes
• One-year replacement warranty

User questions & answers

Question:	Is it easy to carry
Answer:	Yes. Easy to install as well.
Question:	can this be good for 4 bikes
Answer:	I have this mounted on my RV bumper with my Thule 4 bike carrier. Although I only transport 2 bikes, I wouldn't be hesitant at all to load an additional 2 bikes on it. It's stout. If your carrier is of good quality, this receiver will hold it.
Question:	Ships between 1 and 2 months? Is this correct
Answer:	I received mine on 1 week.
Question:	Can the hitch be placed underneath the bumper instead of on top
Answer:	Don't know why it wouldn't work. However, there may be clearance issues when exiting a sloped driveway.

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The XTC Cross-Country 2-Bike Rack is designed to make it easy to carry two bikes securely on your car's hitch with no risk of bike-on-car, or bike-on-bike damage. Thanks to a built-in anti-wobble device, the platform-style rack secures solidly to 2 or 1.25-inch hitches. To load the bikes, simply lift them into the wheel platforms, secure the wheels with the integrated wheel straps, and secure the grip arms over the frames. With push button ratcheting arms and sliding wheel platforms, the rack provides a custom fit for bikes with 20 to 29-inch wheels and can accommodate multiple frame types. The soft frame-friendly coating on the grip arms, ensures that your bikes' finishes remain unmarred. In comparison to roof mounted bike racks that generally require you to remove the bike's front wheel and hitch-mounted cradle carriers that don't support the bikes from the base, the XTC Cross-Country is easy to use and worry free. Whether your rack is fully loaded or not in use, the rack provides ready access to your car's trunk. The rack folds up for easy storage when not in use and the center arm folds down to allow access to the rear of vehicle without removing the rack. Built to last, the XTC Cross-Country 2-Bike Rack carries a limited lifetime warranty from Swagman.

Please note: an optional locking hitch pin and 10-millimeter security cable can be used with this rack and are sold separately.

• EASY TO ASSEMBLE: The XTC2 hitch mount bike rack only takes a few minutes to assemble following the instructions. Once installed, simply place your bikes on the rack and start cruising to your destination
• SAVES YOU STORAGE SPACE: Rack folds easily so that you can conveniently store when you are done using it
• WORRY FREE SECURITY: Have peace of mind knowing that your bikes are protected with locking ratchet hooks and locking hitch pin
• VERSATILE: Easily transports up to 2 bikes and is compatible with a Class 2 or higher, 1- 1/4" and 2" hitch receiver. Fits most frame sizes, shapes and style (fits 12" to 29" tire sizes). Maximum weight capacity of 35Ibs. per bike

User questions & answers

Question:	I notice they have a anti wobble hitch pen as being frequently bought together, does it not come with one for the anti wobble device it says it comes with
Answer:	I use my prime
Question:	I use the 1.25 receiver and my bike sways all over the place. Tried tightening all the parts on the underside and it helped just a little. Would the anti-rattle bolt help
Answer:	if you bought the right one for your bike it should fit I bought a aftermarket not h.d. mine went on nicely
Question:	Clearwater, FL police told me we need to put the license plate on the bike rack itself, that there are ways to do it. Anybody know how
Answer:	No it won’t
Question:	I'm not good at, well, mechanics or whatever you call loading bikes on bike racks. Or bike racks on hitches. Nor am I super strong. Thoughts
Answer:	the docking hardware is for a quick detach setup, if you don't already have the quick detach lugs on your scooter now, you will have to order that accessory seperately.

Product features

XTC2

This convenient bike rack is user friendly and easy to install. The wheel-mount was designed so that you don't have to take off your wheels, an you can lift the bike up onto the rack without a ton of effort. Rest the bike's wheels into the wheel hoops, ratchet down the hooks and you're ready to go.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!