9 best delta orbital sanders

Product description

Shop Fox W1831 Oscillating Spindle Sander w/ 5 Rubber Sanding Drums & 6 Sleeves

• 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified
• Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
• Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
• Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
• Weighs 30-Pound

User questions & answers

Question:	Will this work on hardenable steel? 1/2 hp seems a little low for it
Answer:	No, this is for woodworking. You would need to purchase a grinder for harden steel.
Question:	Can a vacuum be connected to this unit
Answer:	Yes, you can hook up a vac to it. It has a 1 1/2" plastic connector that sticks out of the back of it. You will need to size your vac to fit over this.
Question:	Does it have a tilting tabletop
Answer:	No it does not have a tilting table but it is a very good sander.
Question:	What's the Spindle Stroke on this
Answer:	5/8"

Product features

Shop Fox W1831 Spindle Sander

This benchtop Oscillating Sander is ideal for smoothing edges after cutting with a bandsaw or scroll saw. Fifty eight oscillations per minute ensures even sanding and six sanding sleeve diameters let you sand a full range of inside curves down to 1/2-inch diameter.

Six Spindle Sizes

With six sanding sleeve diameters, this compact sander will handle just about any sanding task you throw at it. The on-board storage keeps sanding spindles, sleeves, table inserts and spindle washers organized and easily accessible.

The various inserts included with the W1831 are used to close the gap between the table insert and drum which reduces the risk of pinching and offers more work support for your sanding jobs.

Built-In Dust Port

The built in 1-1/2-inch dust port ensures a cleaner shop and less airborne dust particles when connected to a dust collector.

Locking Power Switch

The locking power switch with removable key helps protect against unauthorized use and heavy duty cast iron table offer plenty of work support; all which make this a great bench top machine.

Product description

Professional sanding discs for commercial or occasional use



93mm sanding triangle



Coarse (60 Grit), Medium (80 Grit) and 120 Grit hook and loop sanding sheets



This listing is for 240 discs (individual units)



Designed for the automotive refinishing industry



Manufactured from aluminium oxide abrasive for strength and durability



Suitable for use with electric or air tools for smoothing raw wood, paint on wood and metal



The disc is backed with hook / loop cloth for easy installation and replacement



Added convenience of a hook and loop quick change system



Pre punched for use on hand held sanders with integral dust extraction system



5 hole design eliminates clogging and aids dust extraction



5 hole design also reduces the amount of dust which means it can no longer collect in lumps on the abrasive surface



Eliminating the problem of dust clogging which causes defects in sanding surface



Triangular design allows for access into tight corners and other such areas



Pack of 240 discs



60, 80 and 120 grit



Suitable for all materials including metal / wood / plastic etc



LISTING INCLUDES THE FOLLOWING



80 x 93mm Sanding Triangular discs 60 grit

80 x 93mm Sanding Triangular discs 80 grit

80 x 93mm Sanding Triangular discs 120 grit

• Manufactured from aluminium oxide abrasive
• Mixed Grit Package 60, 80 and 120 Grit 93mm Triangle
• 240 x 93mm Sanding Triangular discs Mixed grit
• 5 hole design eliminates clogging and aids dust extraction
• The disc is backed with hook / loop cloth

Product description

Remember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It’s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
• Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
• The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
• Onboard storage maintains organization of all accessories and sandpapers
• Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)

User questions & answers

Question:	How easy to go from belt to spindle or vice versa? How long does it take
Answer:	About a minute, take the nut off the top and the belt assembly will come off. Then you can install the plate and drum onto the spindle. Note: the drum and belt opinions use two different nuts, they both come with the machine, the down side is that you have to keep up with the one your not using. To my knowledge the rigid brand is the same way.
Question:	mine is Missing the 1" spindle, is there somewhere to get that
Answer:	the little one is the sanding roll only
Question:	Work Table spec
Answer:	Any bench you desire. It is very stable and does not move around. Good buy, use it for all sorts of sanding projects in the shop.
Question:	Can anyone please tell me In what direction does the belt spin? To the left (counter clockwise) or to the right (clockwise
Answer:	In the photo, there is a stop bar on the right side which indicates the belt moves from left to right, counter-clockwise, pushing a work piece int the stop bar. But I don't own one of these.

Product features

WEN 6524 Oscillating Belt and Spindle Sander

Oscillating up to 58 times per minute, the WEN 6524 Oscillating Belt and Spindle Sander includes a beveling work table, four rubber sanding drums, one belt sanding attachment, six pieces of 80-grit sandpaper and five throat plates to give you the best result every time. Woodworking will get a lot easier with the WEN 6524 Oscillating Belt and Spindle Sander.

Arcs, Curves and Contours

You will be able to make faces, arcs, curves, contours and more with the WEN 6524 Oscillating Belt and Spindle Sander. This tool allows you to fix a dust collection system to avoid the mess and help you clean up faster. Even after several projects and application, this sander will certainly go strong as it is built to be durable and efficient.

Product description

Professional sanding discs for commercial or occasional use



93mm sanding triangle



Fine 120 grit hook and loop sanding sheets



This listing is for 200 discs (individual units)



Designed for the automotive refinishing industry



Manufactured from aluminium oxide abrasive for strength and durability



Suitable for use with electric or air tools for smoothing raw wood, paint on wood and metal



The disc is backed with hook / loop cloth for easy installation and replacement



Added convenience of a hook and loop quick change system



Pre punched for use on hand held sanders with integral dust extraction system



5 hole design eliminates clogging and aids dust extraction



5 hole design also reduces the amount of dust which means it can no longer collect in lumps on the abrasive surface



Eliminating the problem of dust clogging which causes defects in sanding surface



Triangular design allows for access into tight corners and other such areas



Pack of 200 discs



120 grit



Suitable for all materials including metal / wood / plastic etc



LISTING INCLUDES THE FOLLOWING



200 x 93mm Sanding Triangular discs 120 grit

• 93mm sanding triangle.
• Manufactured from aluminium oxide abrasive
• 200 x 93mm Sanding Triangular discs 120 grit
• 5 hole design eliminates clogging and aids dust extraction
• The disc is backed with hook / loop cloth

Product description

If there are flat or rounded wooden surfaces that need the grit and splinters taken off, the the Ryobi RS290G is the tool to do it right. It’s a compact unit that weighs in at only 4 pounds, letting you put your focus into hitting the spots you need to without worrying about your arms tiring. It has an ergonomic rubber molded to the grip that lets you keep an extra tight hold on the piece, even in slippery conditions. You’ll need that grip, too. At 12,500 orbits per minute, this compact device packs a punch. It’ll be able to run as long as you’re connected to power, drawing in 2.6 amps. Use it with the hook and loop sanding pads included for projects that need to be done as soon as you unpack the box. You won’t have to worry about sawdust getting all over your workplace, either. A bag conveniently located on the back of the unit sucks up sawdust while the motor runs, giving you the most vision of your project possible. Whether you’re refinishing cabinetry, perfecting your doors, or performing any number of renovations that need splinters taken out, the Ryobi RS290G is the sander you can rely on.

• DUST BAG: Keep your workspace neat with the onboard, removable dust bag that helps protect you from blowback while keeping your target visible
• HOOK AND LOOP PAD REPLACEMENT: A convenient hook and loop system makes quick pad changes a breeze
• INCLUDED SANDING DISCS: With these, you can use the tool right out of the box and pick up extras later
• ERGONOMIC HANDLING: The hex-notched rubber design allows you to keep a grip on this tool without worrying about letting it go, even in slippery conditions
• CONVENIENT ON / OFF SWITCH located next to the grip, so you can be sure you have a firm grip when you’re activating and turning off the unit. This way, it won’t get away from you

User questions & answers

Question:	can i get an adhesive backing pad for this sander
Answer:	Sure. The contact area will be small 5" wide by the line that it touches on outside curves.
Question:	Headline says it comes with "3 Pads". Does that mean 3 replaceable foam pads, onto which the sanding discs velcro? Or does it mean 3 sanding discs
Answer:	https://www.amazon.com/Ryobi-039176001022-Sandpaper-Puncher-S652D/dp/B01CPYS4JC/ref=cm_cr_arp_d_bdcrb_top?ie=UTF8
Question:	Opm is mentioned but not rpm. what is the rpm
Answer:	Yes it will work. Use the right grit of sandpaper for a smooth finish
Question:	Can you use it for rounded edges
Answer:	You would take a full sheet of sandpaper and then quarter it

Product description

Remember when you used to have to sand those rounded edges by hand? With the WEN oscillating spindle sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we've sacrificed power. The WEN oscillating spindle sander features a smooth and quiet 1/2HP 3.5 amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber Drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, Table inserts and Spindle washers organized and accessible for Quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN product, Our oscillating spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

• Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM
• Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
• Attach the dust collector of your choice to the onboard dust port to minimize clean-up
• Backed by a two-year warranty

User questions & answers

Question:	How loud is it
Answer:	Not as loud as belt sander. If I was doing a lot of sanding, I would wear hearing protection. It's about 60 to 70 dbs when sanding. The belt sander is about 70 to 80 when sanding. Prolonged use : ear plugs
Question:	Did i get a lemon ? The largest sanding sleeve slides when the machine starts, and so no pressure can be applied to it. What to do
Answer:	Could be the sleeve. I tighten mine down and it works fine. I'm very happy with the one I have. I would contact the manufacturer.
Question:	what's the actually sanding height possible with this sander
Answer:	If the sanding drum in installed flush with the rubber core, the "as-designed" safe sanding height ( distance from the table top to the bottom of the drum downstroke) is 3 3/4 inches. The stroke is 1/2 inch, so it will sand a total of 4 1/4 inches if utilizing the upstroke.
Question:	Anyone find a place to put the extra washers? It's driving me nuts having, seemingly, no where to put them
Answer:	All those neat little places that are designed to hold the accessories are designed by people that don't use the equipment. All the washers, sanding sleeves, mandrills for my machine are in a box not far from the sander. Anything stored as per design would end up covered in sawdust and would have to be removed every time a vacuum or air gun is used for clean up. Cigar box (or similar) is just fine.

Product features

WEN 6510 Oscillating Spindle Sander

Remember when you had to sand those rounded workpieces by hand? With the WEN Oscillating Spindle Sander you'll simplify the daunting task of sanding down curves, arcs, contours and other odd shapes. Expect our quiet 1/2HP 3.5 Amp motor to generate up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six easy-to-change sanding sleeves to allow for a full range of curves that match whatever the situation calls for. The ultra-convenient 1.5 inch dust port provides the option to attach a dust extractor to collect sawdust, ensuring a cleaner work surface while minimizing clean-up after the project.

Powerful Motor

Delivers 3.5 amps (1/2 HP) of sanding power, generating up 2000 RPM and 58 OPM.

Designed for Stable Operation

Pre-drilled holes for mounting along with the sturdy and heavyweight design maximize tool stability.

Cast Iron Worktable

The 15 by 11.5 inch worktable provides more than enough space for larger projects during operation.

Onboard Storage

Side rods and disc slots provide convenient storage for the wide variety of sanding drums and discs.

Ultimate Versatility

The WEN Oscillating Spindle Sander features six different-sized sanding sleeves (1/2, 3/4, 1, 1-1/2, 2, and 3 inches in diameter) and five different rubber drums for optimal compatibility with any size of workpiece. Whatever the shape of your project, expect the WEN 6510 Oscillating Spindle Sander to deliver the right size drum for the job.

Product description

Professional sanding discs for commercial or occasional use



93mm sanding triangle



Coarse (60 Grit), Medium (80 Grit) and 120 Grit hook and loop sanding sheets



This listing is for 120 discs (individual units)



Designed for the automotive refinishing industry



Manufactured from aluminium oxide abrasive for strength and durability



Suitable for use with electric or air tools for smoothing raw wood, paint on wood and metal



The disc is backed with hook / loop cloth for easy installation and replacement



Added convenience of a hook and loop quick change system



Pre punched for use on hand held sanders with integral dust extraction system



5 hole design eliminates clogging and aids dust extraction



5 hole design also reduces the amount of dust which means it can no longer collect in lumps on the abrasive surface



Eliminating the problem of dust clogging which causes defects in sanding surface



Triangular design allows for access into tight corners and other such areas



Pack of 120 discs



60, 80 and 120 grit



Suitable for all materials including metal / wood / plastic etc



LISTING INCLUDES THE FOLLOWING



40 x 93mm Sanding Triangular discs 60 grit

40 x 93mm Sanding Triangular discs 80 grit

40 x 93mm Sanding Triangular discs 120 grit

• Manufactured from aluminium oxide abrasive
• Mixed Grit Package 60, 80 and 120 Grit 93mm Triangle
• 120 x 93mm Sanding Triangular discs Mixed grit
• 5 hole design eliminates clogging and aids dust extraction
• The disc is backed with hook / loop cloth

Product description

Professional sanding discs for commercial or occasional use



93mm sanding triangle



Medium 80 grit hook and loop sanding sheets



This listing is for 100 discs (individual units)



Designed for the automotive refinishing industry



Manufactured from aluminium oxide abrasive for strength and durability



Suitable for use with electric or air tools for smoothing raw wood, paint on wood and metal



The disc is backed with hook / loop cloth for easy installation and replacement



Added convenience of a hook and loop quick change system



Pre punched for use on hand held sanders with integral dust extraction system



5 hole design eliminates clogging and aids dust extraction



5 hole design also reduces the amount of dust which means it can no longer collect in lumps on the abrasive surface



Eliminating the problem of dust clogging which causes defects in sanding surface



Triangular design allows for access into tight corners and other such areas



Pack of 100 discs



80 grit



Suitable for all materials including metal / wood / plastic etc



LISTING INCLUDES THE FOLLOWING



100 x 93mm Sanding Triangular discs 80 grit

• 93mm sanding triangle.
• Manufactured from aluminium oxide abrasive
• 100 x 93mm Sanding Triangular discs 80 grit
• 5 hole design eliminates clogging and aids dust extraction
• The disc is backed with hook / loop cloth

Product description

Professional sanding discs for commercial or occasional use



93mm sanding triangle



Fine 120 grit hook and loop sanding sheets



This listing is for 100 discs (individual units)



Designed for the automotive refinishing industry



Manufactured from aluminium oxide abrasive for strength and durability



Suitable for use with electric or air tools for smoothing raw wood, paint on wood and metal



The disc is backed with hook / loop cloth for easy installation and replacement



Added convenience of a hook and loop quick change system



Pre punched for use on hand held sanders with integral dust extraction system



5 hole design eliminates clogging and aids dust extraction



5 hole design also reduces the amount of dust which means it can no longer collect in lumps on the abrasive surface



Eliminating the problem of dust clogging which causes defects in sanding surface



Triangular design allows for access into tight corners and other such areas



Pack of 100 discs



120 grit



Suitable for all materials including metal / wood / plastic etc



LISTING INCLUDES THE FOLLOWING



100 x 93mm Sanding Triangular discs 120 grit

• 93mm sanding triangle.
• Manufactured from aluminium oxide abrasive
• 100 x 93mm Sanding Triangular discs 120 grit
• 5 hole design eliminates clogging and aids dust extraction
• The disc is backed with hook / loop cloth