14 best tile saws

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

The 69-pound D24000S 10" Wet Tile Saw allows a one person set up and transport. Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts. Rear and side water attachments can be placed on tile saw to catch over-spray from large tile to keep the water in the pan.The D24000S includes a 10" Wet Tile Saw with a stand that folds for easy transporting and storage. The stand holds the 69-pound Wet Tile Saw and provides an ideal work space. Durable aluminum framing and stainless steel rails are built to stand up to the tough jobsite environment. Lightweight folding stand easily sets up on the job and stores in the truck

Light, ultra-powerful, and a breeze to set-up, the D24000S from DEWALT is ideal for renovating bathrooms, cutting porcelain and stone, or tiling a kitchen back splash or floor. The D24000S ships in two boxes and includes the D24000 saw and the D24001 stand. The saw motor tilts and locks at 45 or 22.5 degrees for clean, smooth cuts without the need for an accessory cart block, and adjustable rollers help properly align the table. When tackling large projects, you'll appreciate the 24-inch ripping capacity (18-inch tile on diagonal). To ensure smooth operation, two adjustable water nozzles allow for the correct positioning of spray on the blade, while optional rear and side water attachments capture over-spray so water stays in the five-gallon pan. Additionally, a 3-1/8-inch depth of cut gives you the option of cutting the majority of V-caps and pavers, and an edge guide with dual position 45-degree guide makes it a snap to line-up corner cuts. There's also an efficient 1.5 HP motor, flip-style edge guide for 90 and 45 degree set-up, and a tub-style bottom with four molded sections that fit into the included stand. And because there's a fully integrated durable stainless steel rail system in the saw frame, you'll enjoy precise cuts every time. When you're done for the day, the removable cutting cart gives you better access to the saw so you can clean up quickly and easily.

• Your purchase includes One Dewalt 10-Inch Wet Tile Saw, Wet Tile Saw Stand, 10-Inch XP4 Porcelain Tile Blade, Submersible Pump, Water Pan, Side Water Tray, Rear Water Tray, Cutting Cart Side Extension, Angle/Rip Guide, Blade Wrench & Hex Wrench
• Tool dimensions: 36” L x 29” W x 24” H. Tool weight: 69 lbs. Voltage – 120V. Peak Horsepower – 1.5 HP
• Other specifications: Arbor Size – 5/8”. Blade Diameter – 10". Diagonal Cut Capacity 18” x 18”. Max depth cut – 3 1/8”. Max Rip Capacity with Plunge – 28”. Bevel Capacity – 45ᵒ
• Cutline indicator and stainless steel rollers provide stable, accurate cutting to within 1/32 inch over 18 inch cuts
• Compact saw frame allows for easy transport and storage in vehicle

User questions & answers

Question:	where is this saw made
Answer:	The sticker on the motor says Taiwan.I don't remember what was on the box.
Question:	Does this saw have enough vertical clearance to cut a 4" thick block by cutting halfway through and flipping it over to finish
Answer:	I Cut a 3" X 4" X 8" Concrete Paving Brick in half with one pass, with room to spare.I estimate it will cut close to 4 inches with one pass. Plenty of water is essential for a beautiful cut.
Question:	What is the length of the tray
Answer:	The tray is 25.5" wide x 35" long...hope this helps.....
Question:	Hi Does it come with a blade
Answer:	Yes, is coming with DeWalt blade. If I good remember thats DW4762

Product features

DEWALT D24000S Heavy-Duty 10-inch Wet Tile Saw with Stand

The 69-pound D24000S 10" Wet Tile Saw allows a one person set up and transport.

Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts. Rear and side water attachments can be placed on tile saw to catch over-spray from large tile to keep the water in the pan.

The D24000S includes a 10" Wet Tile Saw with a stand that folds for easy transporting and storage.

The stand holds the 69-pound Wet Tile Saw and provides an ideal work space.

Product description

PORTER-CABLE PCE980 7 in. Table Top Wet Tile Saw features a powerful 1.0 Horsepower motor providing smooth cutting of porcelain, ceramic and Stone tiles. Cast-metal cutting cart delivers 17 in. Cutting capacity, allowing cutting of 12 in. X 12 in. Tile on a Diagonal. Get accuracy of 1/16 in. On cuts up to 12 in. Long. The Pce980 includes Pce980 7 in. Wet tile saw, 7 in. Porcelain tile blade, Miter square, blade wrench. Includes 3 year limited warranty, 1 year free service contract, and 90 day money back guarantee.

• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart
• Splash guard keeps water from spraying the tool operator
• Stainless steel fixed deck holds up to water and jobsite abuse
• Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm

User questions & answers

Question:	how thick will this cut
Answer:	I would say 1:4, if you are cutting porcelain that thick take it slow, natural stone will cut easier. I highly recommend this saw, I use it for small jobs, it’s really great in tight spaces. In my opinion it’s the better of the smaller wet saws as I prefer a rolling table for more accurate cuts. I however use an MK on my bigger jobs and large format tile and stone and it’s a beast with no limitations but cost about 10x what this saw cost. I do a lot of baths and kitchens and I love it!
Question:	Alway problems substituting other brand blades - and can't find PC replacement blades - can anyone confirm good to excellent substitute
Answer:	I've tried several after market blades with this saw. The problem I've experienced is the original PC blade produces a slightly wider cut, allowing the tile to get past the guard support in the back. The blades I've tried produce a thinner cut that prevent the tile from passing around the guard support. I'll try the Pearl P4 7 inch to see if it works, although 50$ is a gamble I'd rather not bet on.
Question:	Can this saw cut glass tiles
Answer:	It can cut glass but without buying a blade specifically for glass tiles you might be disappointed. Every tile installer I know has several different blades always on hand for the abundance of materials thrown at him. Glass Master is a good glass blade and manual cutters often do excellent. With the stock blade you will get some chipping along the cut. Which could be polished out with extra effort. If you can handle chipping go for it.
Question:	Does this saw do miter cuts? Can you angle the blade, or the table
Answer:	Yes, this table saw does simple mitre cuts. The blade is fixed. The table is fixed (does not angle for a compound mitre cut). The product is positioned on the (right) cutting cart that feeds the tile to the blade. The saw comes with a miter square for basic angle cuts.

Product description

For over 100 years Delta has been meeting the needs of the most exacting Craftsmen. Engineered for rugged durability and longevity this saw it designed to make you money. The 7 inch Wet Tile Saw has a powerful 13 amp motor that will handle cutting through natural and man-made tile, stone, and pavers. With its diamond cutting wheel it will handle stone up to 2-3/8 inches thick and has a massive best-in-class rip capacity of 24 inches and an 18 inch diagonal cut capacity. This matches many 10 inch tile saws that are on the market. The saw is constructed using a heavy-duty rail system with 12 bearings engineered for exceptionally straight, accurate and smooth cuts. Dual water nozzles can be adjusted for optimal water placement on the blade minimizing messy over-spray and keeping the blade cool for optimal cutting performance. This saw is a beast that is Built-to-Last!

• Powerful 13 amp motor will cut through natural and man-made tile and pavers
• 7 inch diamond cutting wheel handles stone up to 2 3/8 inches
• Largest rip cutting capacity in its Class up to 24”
• Heavy duty rip fence with positive stops at 0°, 22. 5° and 45°
• Heavy-duty rail system engineered for exceptionally straight, accurate and smooth cuts

User questions & answers

Question:	Is the scissor stand included? I just received mine, but came with no stand
Answer:	No, the stand us an additional purchase. Not the easiest instructions on putting it together, but well worth it.
Question:	Where is it made? are the parts made in china? where is it assembled? i don’t want made in china anymore
Answer:	Not sure . Ive owned MK - Rigid- Pearl abrasive and Target wet saws. tile setter for 16 yrs. Overall for the price its a good saw. Good power , great capacity for cutting large tiles. water management system is good.
Question:	Where is this made
Answer:	According to the box, it is made in Taiwan.
Question:	Travertine - 1.25" thick 24" x 16" will this work? I need to cut .5" off of the 24" side and need a table extension to do...or a saw with 24"+ clearan
Answer:	Yes, it will work. I own this saw and have ripped 24" tile within 1/16" accuracy. You'll just need to take it slow given the thickness of your tile. The blade that comes with it is quite capable, however I eventually switched mine out for a Pearl P4. Excellent saw and a pleasure to use.

Product features

HUGE CUTTING CAPACITY

The Delta Cruzer 7 inch Wet Tile Saw with its diamond cutting wheel can handle stone up to 2-3/8 inches thick and has a massive class leading rip capacity of 24 inches and 18 inch tile diagonal cut capacity

BUILT-TO-LAST

Powerful 13 amp motor easily cut through granite, porcelain, concrete and other stone materials. The diamond cutting blade is Grade #1 quality. This saw does not come with one of those cheap blades that you discard before your first use

ACCURACY AND CONSISTENCY

The Delta Cruzer Wet Tile Saw is engineered for accuracy saving on wasted material, reducing rework time and frustration and improving the appearance of your project. Cut after cut you can count on consistently accurate cuts without blade drift

Product description

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

User questions & answers

Question:	will this saw, with the standard blade that comes with it, cut glass bottles
Answer:	I don't know for sure. I did cut quite a lot of glass tile. I had to a different blade for glass. it did an exceptional job. In fact i used it to install 2500 sqft of tile in my house. It still has good life left in it.
Question:	Need to slice 1/8"-1/2" glass rods coe 104 & 32. Slice cylinder= thickness of rod & length of 4mm. cut should be clean but not pristine. Will thiswork
Answer:	Thank you for your question. The Skil 3550 is not designed for cutting glass, it is designed for cutting tile. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-754-5999
Question:	Does this include a blade? The info @ Amazon says bare tool, yet the Skil website says yes
Answer:	Yes, the blade is included. The tile saw includes the 7 in. Diamond Blade, Side Extension, Rip Fence, Miter Gauge, Blade Guard and Blade Wrench.
Question:	Why is this model so much more expensive than the model is replaced? The 3540-02 was half this price, so what is the difference
Answer:	Thank you for your question. The Skil 3550 can cut tiles up to 18x18 inches, has an aluminum table top and also our Patent Pending HydroLock System which is an innovated upper and lower guard design that keeps water contained near the blade. The Skil 3540 cuts tile up to 12x12 inches, has a stainless steel table top and does not have the HydroLock System. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999).

Product features

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• 【DURABLE AND POWERFUL MOTOR】: Featured with a 4 Amps copper motor, the compact circular saw can reach a high cutting speed of 4500RPM to cut tile, wood, plastics, plaster board, PVC with ease. Heavy gauge iron wraparound base and aluminum upper cover adds extra durability and safety.
• 【3 BLADES AND COMPACT】: Comes with 1x30T HW for wood cuts/ 1x36T HS for metal cuts/ 1pcs grit diamond blade for tile cuts, small size and weight also make it a good addition to your toolkit, great for DIY projects around the house and your workshop. (1"for Wood; 3/8"for Tile; 3/16"for Aluminum)
• 【PRECISE AND ADJUSTABLE CUTTING DEPTH】: With the laser guide, the mini circular saw keeps the cutting on a straight line. Also the parallel guide attachment allows you to make a precise and quick cut with ease. Easy-set depth gauge lever for adjustable cutting depth from 0-25mm(1’’). Laser Level: Class 2.
• 【ERGNOMIC AND SAFE】: The soft rubber handle reduces hand fatigue effectively. Also with a dust port and the saw dust pipe, you can connect it to your vacuum to maintain a clean working environment. The double protection switch enhances safety in use.
• 【PACKAGE CONTENTS】 1 * Compact Circular Saw; 1 * 30T Saw Blade; 1 * 36T Saw Blade; 1 * Diamond Blade; 1 * Hex Wrench; 1 * Scale Ruler; 1* Dust Exhaust Pipe；2 * Cells for Laser Guide; 1 * User Manual.

Product description

Specifications:



Arbor Size: 5/8"

Motor: 120V/60Hz/5A

No Load Speed: 3550 RPM

Blade: 7” Diamond Blade

Table Tilting Range: 0-45°

Table Size: 15-3/4” × 16-1/2”

Max Cutting Capacity: 1” Thick, 12” Wide

Package: 7-Inch Tile Cutter, 1 Spanner Wrench, 1 Nut Driver, 1 Instruction Manual



Features:



Reinforced impact-resistant tub

Lightweight, fully portable to carry

Chrome plated table to resist rust

Bevel cuts tile from 0 to 45 degrees

Water cooling system for wet cutting

Adjustable rip fence with miter gauge

Powerful induction motor with thermal protector

Simple structure, Easy to use, Easy to maintain

Make quick, precise cut in tile, marble, masonry, ceramic



Leegol Electric 7” wet tile saw, uses an adjustable rip fence with miter gauge providing accurate straight and miter cuts. Diamond blade ensures smooth cutting along with a blade cooling water reservoir that keeps the blade cool and minimizes dust and debris.



This tile saw is ideal on job sites where space prohibits the use of a large wet saw.Whether you’re updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the Leegol 7-inch Wet Tile Saw (3550).Users will be surprised by the strength of its true induction motor. This economical, yet powerful saw cuts through unlimited sizes of ceramic and tile.



Whether you’re a DIY lover, a crafter, or a woodworker, the Leegol wet tile saw is the perfect companion for every project on your list.

• Bevel cuts tile from 0 to 45 degrees - flexibility for different cut types
• Adjustable rip fence with miter gauge - for accurate straight and miter cuts
• Blade cooling water reservoir - keeps blade cool and minimizes dust and debris
• Powerful induction motor - supply generates up to 3,550 RPM for the most demanding jobs
• 100% Satisfaction Guaranteed: With a manufacturer warranty you can be sure you will get a quality wet tile saw.If you get a poor saw,contact with us,we will supply a new one.

User questions & answers

Question:	Do any of these cut into silverware
Answer:	Hello,the tile saw could not cut into silverware.
Question:	Can it be used to cut brick? I have whole bricks that I want to convert to brick veneers
Answer:	I don’t think it will cut that thick of a product
Question:	What is the maximum thickness it will cut
Answer:	Mine was DOA so it didn't cut anything. Very cheap product, many issues. I would spend a little extra and get a product that does the job, which this one does not.
Question:	Does this saw do a decent job of catching the dripping water or did it make a mess
Answer:	This wet saw, Does not have : 1- Model number, 2- Name, 3-Serial number, 4-Technical support number and email 5- Not any CONTACT US information

Product features

7 In. Portable Wet Cut Tile Saw

This compact 7 in. wet tile saw cuts masonry as thick as 1 in.

The table on this wet cut tile saw adjusts for beveling.

Reinforced tub stands up to jobsite abuse.

Fully portable, works wet.

Chrome Plated Table Top

Chrome plated table top will resist corrosion after multiple uses.

Table Tilts to Make 0-45° Bevel Cuts

The 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

Blade cooling water reservoir keeps blade cool and minimizes dust and debris.

Product description

Diamond Drill Bit Set, THINKWORK 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble, 6mm -- 50mm

Why do customers choose to buy our diamond hole saw set? 1. These diamond drill bits are made of industrial grade carbon steel and have a nickel-plated coating to prevent corrosion.

The thickened diamond coating on top provides excellent cutting strength.

2.10 different drills, can meet various needs: 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm

3.Adjustable hole saw drilling guide fixture with suction cup + exquisite screwdriver.

Hole saw guide: Material: rubber base + plastic shell + steel

Two fixed modes are available: Mode 1, reverse side of adjustable plate: You can fix the hole saw with 4 bearing balls, the maximum size is 3-1 / 4 inch.

Mode 2, Adjustable plate reverse side: Place the reverse rotation plate, and then move a bearing ball to the bearing hole.

You can fix the hole saw with 3 bearing balls, the maximum size is 1-3 / 4 inches.

NOTE: 1. If you smell a burning odor, step back! Either it is too fast or the pressure is too great.

The bit you are drilling must not be exposed to high temperatures or even heat.

2. Not suitable for concrete or deeper than 1/2 inch.

3. Lubricating water is needed when drilling, which will greatly extend the life of the drill.

The package includes: 1 PC hole saw rail clamp

10 PC diamond coated drill

1 screwdriver

1 instruction manual

• 【Superb craftsmanship】These diamond drill bits are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion. The thickened diamond coating on the top provides excellent cutting strength for high-precision, smooth cuts without hemming for maximum drilling results.
• 【Ergonomic design】The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. Small holes-When debris gets stuck in the hole saw. We can use our screwdriver to pull it out. To provide you with the perfect experience.
• 【Adjustable fixture】Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board.
• 【Various sizes】This diamond hole saw kit come with 10 different drill bits to meet various needs. Including the following diameters: 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver.
• 【Ideal select】This diamond-coated hole saw bit can be used to remove rings on glass, marble, tile, ceramic, PVC or other materials. When the diamond bit is working, please continue to add water to reduce the drilling speed, reduce the drilling pressure, and increase the water lubricity, which will greatly extend the life of the bit.

User questions & answers

Question:	Can I use them to punch a hole in granite counter
Answer:	I wouldn’t! And it wouldn’t even stick to the tiles I needed them for. Their cheap bits. I wouldn’t recommend for granite.
Question:	Do I need to add water during use
Answer:	Hello, I am the seller. Thank you for your question. Water needs to be added during use. Good cooling will greatly extend the service life of the drill.
Question:	I need to drill holes in the bottom of the glazed ceramic or ceramic pot. Will these bits work
Answer:	They do a great job, the key is to put a water bottle nearby and keep the things you want to get wet. You will be surprised at how well they perform.
Question:	Can it be used for thin wood boards
Answer:	I don’t know. These drill bits are specially designed for glass, maybe ceramic instead of wood.

Product features

Adjustable fixture

Precise positioning without offsetting. Movable ball bearings, two modes (fixed 3 or 4 bearings) are your choice, just flip the board.

Design concept

Side groove design helps the entry of cooling water and the drill bit can remove waste, thereby keeping the drill bit clean during work.

Special material

The diamond bit is made of carbon steel and has a nickel-plated coating, and the one-piece structure is sufficiently rigid.

Package includes

10PC diamond drill + 1PC adjustable hole saw guide fixture + 1PC screwdriver + 1 instruction manual.

Product description

TILE & TABLE SAWS

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	How do you change the blade on this
Answer:	There is a blade lock and it should have come with a tool to change it
Question:	Gfci corded
Answer:	Yes,it is
Question:	Can this make a curved cut, say for around a toilet application
Answer:	The way to make inside curves is to cut parallel "fingers" and snap them off. Then use the saw blade to grind it to the line. Remember that the blade is cutting from top so you'll need to either flip the tile to grind the back or use a grinder. You can use a regular tile saw that way as well.
Question:	Could you cut geodes with this saw? With a diamond blade
Answer:	It would certainly cut into the geode, but depending on the wall thickness as to whether it will cut into the cavity.

Product description

The 10 in. High Capacity Wet Tile Saw provides the professional tile installer a 37 in. rip cut capacity, 8-1/2 in. crosscut capacity, and 1/32 in. over 30 in. accuracy . The rip cut capacity in combination with 18 in. cutting clearance (left of blade) allows the user to rip 36 in. x 36 in. tile in half. The crosscut capacity is ideal for 6 in. sill cutting and up to 8 in. x 48 in. plank cutting at a 30% offset. Perform rip cuts up to 41 in. with plunge. The 28-7/8 in. width from column to cart edge allows you to pass through standard 30 in. door frames. When the water tray system is installed, 18 in. x 36 in. and 24 in. x 24 in. tiles are fully contained within the coverage area, limiting mess when working indoors. The stand allows you to set up a workspace on site, and at only 91 lbs., the tile saw is made for portability to and from the jobsite.

• Cutline indicator, rigid frame, and stainless-steel rollers provide cutting accuracy to within 1/32 in. over 30 in. cuts
• 37 in. rip cut capacity (41 in. with plunge) and 18 in. cutting clearnace left of blade allows users to rip 36 in. x 36 in. tile in half
• 8-1/2 in. crosscut capacity is ideal for cutting 6 in. sills and 8 in. x 48 in. planks at a 30% offset
• 91 lbs. for portablility to and from the jobsite
• 28-7/8 in. width from column to cart edge fits through standard 30 in. door frames
• 15 Amp motor provides 1220 MWO for demanding applications
• 18 in. x 36 in. and 24 in. x 24 in. tile fully contained within water tray system, helping keep the work area clean and dry

User questions & answers

Question:	Depth of cut
Answer:	The D36000S has a 3-3/8" depth of cut at 90-degrees.
Question:	Does it come with a stand
Answer:	Yes, it includes the stand
Question:	Can a 4” brick be cut
Answer:	D36000S is designed for porcelain/tiles
Question:	laser guide
Answer:	The D36000S does not have a laser guide.

Product description

Hot sintered continius rim turbo cutting ceramic saw blade matched with hand-held machine,and widely used for cutting porcelain tile, ceramic tiles, stonce prcess or construciton. . Universal for dry or wet cutting; . X teeth offer fast and smooth cutting; .Super thin porcelain saw blade with free chips for cutting

• Universal for dry or wet cutting.
• X teeth offer fast and smooth cutting.
• Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you.
• Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.
• Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade.

User questions & answers

Question:	Can I use this to cut a wine bottle
Answer:	Yes, it could be used for cut a little glass.
Question:	Will this fit on a dremel
Answer:	we don't think so our blade fit on dremel 3000 for you need to match right arbor.
Question:	Will this work with the dewalt angle grinder (model dcg413b) with arbor size
Answer:	It does have .625 arbor size but is intended to be used in a saw making straight line cuts. If you don't stay in a straight line it will bind and may damage the workpiece. I would not recommend using it in an angle grinder.
Question:	Does it works in angle grinder
Answer:	Won’t work on a 4” grinder.

Product description

DEWALT DWC860W 4-3/8-Inch Wet/Dry Handheld Tile Cutter has a powerful 10.8 amp (1,300 watts) motor that delivers the cutting power to cut through granite, porcelain, concrete and other stone materials. Compact and lightweight at only 6.6-Pound Premium 4-3/8-Inch diamond blade for cutting ceramics and stone materials up to 1-3/8-Inch deep, wet or dry. The dust sealed switch protects the unit from contamination and prolonges the life of the unit. It also has a lock-on button to reduce user fatigue durign production cuts and a rubber ermold grip tp provide increased user comfort and ergonomics. Also includes: 13" Water line and regulator, 4-3/8-Inch DeWalt Diamond Blade, wrenches for blade change, and instruction manual.

• Power 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials
• Premium 4-3/8-inch diamond blade allows the user to cut ceramics and stone materials up to 3-centimeters deep-wet or dry
• 13-Foot water line feeds water to the blade decreasing dust and increasing blade performance and life
• Bevels to 45 Degrees for quick angled cuts
• Lock-on button reduces fatigue during production cuts

User questions & answers

Question:	will a cupped blade fit in it for cutting out oval sinks holes for granite counter tops
Answer:	Not in my opinion
Question:	can this cut through 1/2" concrete slab
Answer:	Yes, the premium 4-3/8" diamond Blade allows the user to cut ceramics and stone materials up to 1 3/8' deep wet or dry.
Question:	is 4 1/2 or
Answer:	It comes with a 4 3/8 blade. A 4 1/2 blade for 20mm arbor can be used. Most 4 1/2 blades are 7/8, 20mm or 5/8 arbor with a bushing to fit the different sizes. A 4 1/2 blade is a tight fit. I knock out the 5/8 arbor, set the blade in place, then put in the 20mm bushing and seat it with the mandrel nut. You can get the blade on with the 20mm bushing installed with a bit of jiggering.
Question:	what is the deepest cut this saw will make? The cheap Ryobi I bought at the Depot wasnt quite deep enough with a 4" blade
Answer:	Hi. CORRECTED ANSWER: I measured the depth on my blade (which is slightly worn) and it is 1-5/16 inch (1.32 inch) for a straight up cut. For an angled cut, it will be less of course. I used it to cut through floor tile with a concrete/metal mesh base layer. There is absolutely no room in the blade guard to try an even slightly larger blade. It is a tight fit. The saw performs well and is easy to control as long as it is used with water flow. I tried to use it dry, and in less then a minute the whole house was filled with a thick cloud of dust.

Product features

DEWALT DWC860W 4-3/8-Inch Wet/Dry Masonry Saw

The DWC860W 4-3/8" Wet/Dry Handheld Tile cutter has a powerful 10.8 Amp motor to deliver power for cutting through granite, porcelain, marble and glass, yet it is lightweight and compact to reduce user fatigue. The DWC860W is ideal for back splash, threshold and plank and large format tile work. The flow adjustable water connection keeps the blade and material cool while helping to reduce water puddles in the work area.

Features

• Powerful 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete, and other stone materials.
• Lightweight and compact
• Premium 4-3/8" diamond Blade allows the user to cut ceramics and stone materials up to 1 3/8' deep wet or dry
• 13,000 rpm max with no-load speed provides plenty of speed to complete the user applications.
• Bevels to 45 degrees for quick and precise angle cuts
• 12' water line feeds water to the blade decreasing dust and increasing blade performance and life
• Lock-on button reduces user fatigue during production cuts
• Adjustable depth-of-cut allows users to cut at various depths
• Dust-sealed switch protects the unit from contamination and prolongs the life of the unit
• Rubber overmold grip provides increased user comfort and ergonomics

Product description

The lightweight and portable MK Diamond 159943 MK-370EXP 1-1/4 horse power, 7-Inch wet cutting tile saw is made to the highest professional specifications. The MK-370EXP weighs 33 pounds and can cut tile 18-Inches long and diagonally cut 13-Inches diagonally. You get close to the same capability as much bigger and heavier saws. The MK-370EXP features built in 45 degree miter system, plunge cut capability makes cutting outlets and other openings quick and easy. The hinged blade guard makes for easy blade changes and maintenance inspection. The MK-370EXP comes with 7-Inch wet cutting diamond blade, water pump, and rip guide. Specifications: Powered by 1-1/4 horsepower electric 120V motor; depth of cut is 2-Inch (51 millimeters); length of cut 18-Inches (457 millimeters); diagonally cut 13-Inches (330 millimeters).

• Lightweight and portable tile saw is made to the highest professional specifications
• Hinged blade guard for easy blade changes and maintenance inspection
• Built in 45° miter system
• Plunge capability makes cutting outlets and other openings quick and easy
• The 5/8-Inch diameter chrome-plated linear guide bar provides smooth, straight, ridgid support for precision cutting

User questions & answers

Question:	Will this saw cut Porcelain tile
Answer:	With the proper blade any wet saw will cut porcelain. Buy a good blade and use a saw with the blade mounted above the tile rather than below.
Question:	What is the distance between the blade and the arm
Answer:	Definitely a challenge to cut large format tiles such as 12x24. If you have to cut lengthwise you have to let the tile sit long towards you over the square edge and use the clamp to keep it straight, that sorta works and if you have to cut a 12x24 in half at more than 9" you are -sol- out of luck, it will not work. The only work around is wasting a chunk of tile by cutting 9" off (and hoping that you can still use that part somewhere) and then cutting off another chunk so you get to your desired length. MK could have made the tray wider by three inches.
Question:	how would this saw work for cutting rock and minerals for lapidary work? thanks
Answer:	I guess it would work depending on the size of the stones. They couldn't be too big. I would use a table type tile saw where the blade sticks up thru a slot. It would give more freedom of movement.
Question:	Can you use a 6 in blade on this unit
Answer:	No a six-inch blade will not reach the table

Product description

Barwalt Tile Saw Shack / Wet Tent - Extra Large. No more wasting time by going outside the house to keep the mess of cutting tile and related materials off the floor and walls of the job site! No more having to heat the water for your saw so it will not freeze in the winter! No more having to try and make that cut by hand so you don't have to go outside again! The Barwalt Saw Shack is well designed, easy to assemble, collapses into a neat bundle for storage and is very affordable. This product will save your customer time, which is money, and is a must have for every Contractor! The aluminum framework is well designed and will last many years. All plastic parts are made out of 30% Glass Filled Nylon 6. This is the material they use for intake manifolds in car engines. All bolts are made out of stainless steel, fitted with aircraft grade nuts that will not fall off. The heavy gauge plastic sheeting used on the pan is industrial strength. The clear plastic surround is also made out of heavy gauge sheeting and uses industrial strength zippers. The Velcro used at all attachment points is commercial grade. The heavy gauge storage bag included will make it easy to store your SAW SHACK as well as tote to the next job. Measurements: 47" x 60" x 62"

• The aluminum framework is well designed and will last many years.
• Measurements: 47-Inch x 60-Inch x 62-Inch
• The Velcro used at all attachment points is commercial grade.
• The heavy gauge plastic sheeting used on the pan is industrial tough.
• All bolts are made out of stainless steel, fitted with aircraft nuts that will not fall off.

User questions & answers

Question:	How long does it take to setup? And, is it easy to put bag in its bag
Answer:	it does not take long at all to assemble and it folds easily to return to the bag. This product makes it convenient to set up the saw in the room you are working in instead of having to go outside to make your cuts because of the mess.
Question:	Will this fit a Dewalt saw with the trays attached and cut/rip a 24" tile
Answer:	Although I haven’t used it yet, I bought this to fit the same 10” Dewalt saw that it sounds like you’re speaking of. With the x-large dimensions being 47”x 60”x 62” it should handle that saw just fine. For that matter if you use the tent you shouldn’t even need the side tray. Take some measurements of your saw w/ 24” tile and see what you think.
Question:	How do you get rid of the water once your done using it
Answer:	we just clean it up with a sponge , there isn't a lot of water on the floor pan !
Question:	Is the base able to stop excess water from getting on the floor
Answer:	Yes. The base has a strong pvc-like lining material which prevents water from exiting the tile shack. However, excess water remaining in the pan should be removed before packing up the unit.