14 best power sanding sleeves

Product description

Remember when you could smooth out those jagged curves? Take on edges, contours, holes, insides, outsides and whatever other sides with the WEN 20-Piece Sanding Drum Kit. Simply pop the 1/4-inch shank of your sanding drum into your preferred chuck, then get to sanding. This package includes one 1/2-inch sanding drum with a 1/2-inch diameter (1/8-inch shank), one 1-inch sanding drum with a 3/4-inch diameter (1/4-inch shank), one 1-inch sanding drum with a 1-inch diameter (1/4-inch shank), one 1-1/2-inch sanding drum with a 2-inch diameter (1/4-inch shank), two 80-grit sanding sleeves in each size, and two 120-grit sanding sleeves in each size. Just pick your size, slide the sleeve into place, and tighten the bolt that appears on the underside of each drum. Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill. Remember when you could reach the unreachable?

• Features four sanding drums and 16 pieces of Sandpaper
• Perfect for your WEN drill press or your WEN 20V max Lithium Ion power drill
• Includes two 80-grit sanding sleeves and two 120-grit sanding sleeves in each size
• Four sanding drums measure in at 1/2-by-1/2 inch, 1-by-3/4-inch, 1-by-1-inch, and 1-1/2-by-2-inch
• 1/8 to 1/4-inch shanks fit in the majority of drill presses and power drill chucks on the market

User questions & answers

Question:	can you buy replacement sleeves
Answer:	Hey! This is Mallorie at Superfeet HQ. Your usage will determine how often the insoles need to be replaced. Our general rule of thumb is 1 year or 500 miles.
Question:	Will this work for sanding glass
Answer:	Hey! This is Mallorie at Superfeet HQ. Yes, a man could wear the BERRY insole, but if you're interested the men's equivalent insole is the ORANGE.
Question:	Will these work with a table router
Answer:	Every 12 months or 500 miles. They are guaranteed for 60 days. You will love these if you are having foot problems. I was skeptical because they are so thin. They have definitely taken care of my plantar fasciitis. It took a couple of weeks for the pain to stop but I am sold on these!
Question:	Is this the product used to enlarge birdhouse holes
Answer:	Thats tricky. When you buy shoes with actual arch support built in them, does it feel like the aech is in the right place for you or does it feel like it is too far forward or backword? I would say if they are always in the right place, order the size 8.5-10. But if they feel like they are too far forward, order the size 6.5-8. My very first pair of superfeet I bought, I had been fitted for in a comfort shoe store in a mall, and the very knowledgeable man who helped me, said my foot measures a size 8, but my arch measures a size 8.5. The next pair I bought, these berry ones, I ordered from Amazon, and I got the size C. After wearing them for nearly 2 years now and thinking these don't provide me nearly as much support as my Vionic flip flops do, I realized that the arch support hits too far back and I should have gotten the next size up, the size 8.5-10. So now I am ordering the next size up in the Superfeet Blueberry (as they are suppose to have the next level up of arch support from the Berry's) and that should solve my problem.

Product features

WEN DS164 20-Piece Sanding Drum Kit for Drill Presses and Power Drills

Remember when you could smooth out those jagged curves? Take on edges, contours, holes, insides, outsides and whatever other sides with the WEN 20-Piece Sanding Drum Kit. Simply pop the 1/4-inch shank of your sanding drum into your preferred chuck, then get to sanding. This package includes one 1/2-inch sanding drum with a 1/2-inch diameter (1/8-inch shank), one 1-inch sanding drum with a 3/4-inch diameter (1/4-inch shank), one 1-inch sanding drum with a 1-inch diameter (1/4-inch shank), one 1-1/2-inch sanding drum with a 2-inch diameter (1/4-inch shank), two 80-grit sanding sleeves in each size, and two 120-grit sanding sleeves in each size. Just pick your size, slide the sleeve into place, and tighten the bolt that appears on the underside of each drum. Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill. Remember when you could reach the unreachable?

• Features four sanding drums and 16 pieces of sandpaper
• Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill
• Includes two 80-grit sanding sleeves and two 120-grit sanding sleeves in each size
• Four sanding drums measure in at 1/2-by-1/2 inch, 1-by-3/4-inch, 1-by-1-inch, and 1-1/2-by-2-inch
• 1/8 to 1/4-inch shanks fit in the majority of drill presses and power drill chucks on the market

Product description

Kit contains: 4 x Sanding drums, each is 1/4" Shank & 2" Long sanding area. Drum Diameters: 1/2" Diameter ----- 3/4" Diameter ----- 1" Diameter ---- 1-1/2" Diameter . 12 x Sanding sleeves, 3 for each diameter, each diameter will have one fine, one med and one coarse.

• Extra long drum sanding set converts your drill or drill press into a mini spindle sander
• Ideal for use to smooth out rough edges and cuts
• Sand the inside surfaces of deep drilled holes.
• Clean up bandsaw marks on contour cut
• Check out the description bellow for whats included

User questions & answers

Question:	will these work with a Foredom rotary tool
Answer:	I ordered size 10.. For some reason, these products are displayed on Amazon separately by size rather than just letting you select the size when you order.... a bit inconvenient.
Question:	What grit are the 3 that come with this
Answer:	Size D - M 7-7.5 / W 9-9.5
Question:	what's the size of the Shank
Answer:	I have not tried in a size 3 but look into the 3/4 length ones not full length. I have a pair and use them in dress shoes because it stops short of the ball of the foot/toes.
Question:	what are the outside diameter of the different drums
Answer:	These should be worn all the time, but yes, please don't go dancing without them. Just be aware, you may need to allow your feet to get used to them. Your feet may have gone a little flat (as most people's do), and you should wear them a few hours at a time at first, for the first couple weeks, bring your old insoles with you, so the arch in your foot can become strong again, they will be sore at first. It's completely worth it though. I even have a pair in my house shoes.

Product description

Set of 4 expanding drums that are 2” Long with the following diameter size: 1-1/2”, 1”, 3/4”, and 1/2”. Includes 3 different kind of sanding grits sleeves: 50, 80, and 120 grits (4pcs each). This is excellent for sanding holes, edges, contours and irregular shapes. Ideal to smooth out rough edge and surface, polish soft and hard materials. Recommended use for home improvement, artwork, woodworks, plastic and metal. Extra-long drums for working wider edges.

• Set of 4 expanding drums that are 2” Long with the following diameter size: 1-1/2”, 1”, 3/4”, and 1/2”.
• Includes 3 different kind of sanding grits sleeves: 50, 80, and 120 grits (4pcs each).
• This is excellent for sanding holes, edges, contours and irregular shapes.
• Ideal to smooth out rough edge and surface, polish soft and hard materials.
• Recommended use for home improvement, artwork, woodworks, plastic and metal.

User questions & answers

Question:	What is the thread size
Answer:	I doubt it.
Question:	what is the shaft diameter? will it fit a Dremel rotary tool
Answer:	If they fit on the drum of router than most likely but depending on how fast the table is they might break easier than normal
Question:	Max rpms will this work in a router table
Answer:	You might be able to enlarge a hole by fractions of an inch, but probably not more than a 1/16 or 1/8 if the material is thicker than a quarter inch or so. Even then it would take a long time. Try using a hand rasp or file if you only have a couple to do, otherwise a power jigsaw with a thin blade might be your best bet.

Product description

Remember when you had to sand those rounded edges by hand? Give your surfaces the finish they deserve with the WEN Spindle Sanding Sleeves. Designed for use with the WEN 6510 Oscillating Spindle Sander, this set includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves to meet a variety of applications. Each grit includes a total of six different diameter sleeves: 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, 2 inch and 3 inch.

• Includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves
• 1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in. and 3 in. spindle sleeve for each grit
• Perfect for material removal, resurfacing and more
• Designed to fit the WEN 6510 Oscillating Spindle Sander

User questions & answers

Question:	Will these work on a sears 1/2 hp sander
Answer:	They should if you have a orbital oscillating sander. The sizes are standard.
Question:	Will these work on my triton tspst 450 oscillating sander
Answer:	Should be no problem, they are made for all oscillating sanders
Question:	Can these be used for metal
Answer:	Yes - just keep the speed down and let the grit do the cutting.
Question:	How long are these sleeves
Answer:	They are 4-1/2" long

User questions & answers

Question:	Does this item work with tools from the Dremel Company
Answer:	Yes (although I haven't done so yet). I think they are standard sleeves that can be purchased at any woodworking shop or online. I think that they are the same as the sleeves that drum sanders use.

Product description

60-1180 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum Sander 180 Grit 6 wraps in a box

• Ready To Wrap Abrasive Strips (6 ROLLS) 180 Grit
• Long Lasting Aluminum Oxide Sandpaper
• Heavy Duty Antistatic Cloth Backing
• 60-1180 Ready to Wrap Abrasive Strips For Performax 10-20 Plus Drum Sander

• GIVE SURFACES THE FINISH THEY DESERVE: Use the ABN Aluminum Oxide Spindle Sanding Sleeves 18-Pack – 4.5” Inch Length, Assorted 80 120 240 Grit, 1/2" to 3” Inch Wood Sandpaper whenever you need high-performance abrasive sleeves for professional material removal, sanding, and resurfacing
• MAKE YOUR WORK EASIER: Instead of sanding those tough, rounded edges by hand, you can abrade, sand, finish, and polish hard or soft woods from bare wood to the deepest and finest of finishes with these simple sleeves
• USE YOUR SANDER: Designed for use with oscillating and spindle sanders
• BUILT TO LAST: Constructed from paperboard and aluminum oxide to prevent loading and increase longevity
• CONTENTS: Package includes 80-grit sleeves, 120-grit sleeves, and 240-grit sleeves; Includes 1/2", 3/4", 1", 1.5", 2", and 3" inch diameter spindle sleeves for each grit; All sleeves are 4.5” long

User questions & answers

Question:	do they fit craftsman mo
Answer:	it comes in 60 grit , 80 grit and 120 grit
Question:	what size and make spindles do these sanding drums use
Answer:	1/4 inch shank
Question:	Who sells sanding drums these can be used on? I'm not interested in an oscillating sander at this point. Would like to use in drill press
Answer:	This Kit contains:4 Drum Diameters: 1/2" Diameter ----- 3/4" Diameter ----- 1" Diameter ---- 1-1/2" Diameter 12 Sanding sleeves, 3 for each drum diameter, each diameter will have one fine, one med and one coarse.

Product features

About the ABN Spindle Sanding Sleeves 18-Pack

Instead of sanding those tough, rounded edges by hand, you can abrade, sand, finish, and polish hard or soft woods from bare wood to the deepest and finest of finishes with these simple sleeves.

Give your surfaces the finish they deserve with the ABN Aluminum Oxide Spindle Sanding Sleeves, 18-Pack.

CONTENTS

Set includes 80 grit sleeves, 120 grit sleeves, and 240 grit sleeves.

Constructed of Aluminum Oxide, each sleeve is 4.5 inches long.

PROFESSIONALLY FINISH ANY SURFACE

For professional removal, sanding, and resurfacing, use these spindles to abrade, sand, finish, and polish hard or soft woods even in a tight radius.

QUICK INSTALLATION

Designed for oscillating and spindle sanders.

These 4.5” long sleeves fit directly over the rubber sanding drum metal shaft.

BUILT TO LAST

Cloth-backed for better results with no scratches, sliding, skipping, or uneven sanding jobs, the paperboard and aluminum oxide prevents loading and increases longevity.

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We provide the Midwest with the highest quality auto body supplies and car care products on the market. We have an exceptionally strong presence on Amazon, shipping over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

• Pack of 18 oscillating spindle sander sleeves
• 3 each of 1/2 inch, 3/4 inch,1 inch,1-1/2 inch, 2 inch and 3 inch sanding sleeves; various diameters to fit your task perfectly, 4.5" in length
• Aluminum Oxide Abrasive providing high performance and durability
• Excellent for sanding, resurfacing or other types of metal and wood working
• Fitting most spindle sanders in the market: RYOBI, JET, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton, and more

User questions & answers

Question:	will these work on a Jet sander
Answer:	Thread size? What thread? The only threads are on the screw that expands the rubber drum to secure the sanding drum.
Question:	does any one sell 40 grit
Answer:	No. It is 1/4 inch. It will fit a die grinder.
Question:	How long are they? I need them 4 1/2" long
Answer:	Yes it will, use the adapter that came with the router table.
Question:	Will these fit on the sanding sleeves with the shop fox w1668 drill press
Answer:	Providing your rotary tool, that I am not familiar with, can chuck a 1/4 inch shank.

Product features

LotFancy Oscillating Sanding Sleeves

LotFancy Sanding Sleeves are excellent for sanding, resurfacing or other types of metal and wood working.

These Spindle Sander Sleeves are perfect accessory to sand, shape, groove & finish soft & hard woods, fiberglass & more.

Our LotFancy Oscillating Sanding Sleeves provide 6 sizes (total 18pcs/pack), to fit your machine and task perfectly.

The Aluminum Oxide Sleeves achieve the ultimate in performance, value, durability and versatility.

Applicable Models

These Sanding Sleeves fit most standard oscillating sanders, such as:

Ryobi OSS450, DELTA SA350K, Grizzly G0739, WEN 6510,

POWERTEC OS1400, Rockwell RK9011, Shop Fox W1831, Triton TSPS450, etc.

Specification:

Length: 4-1/2”

Diameter: 1/2”,3/4”,1”,1-1/2”, 2” & 3”

Grade: 60 Grit

Quantity:18pcs/pack

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

From the Manufacturer

Perfect for any industrial sanding application. These sleeves are spiral bound and resin bonded for heavy duty use. Available from 1/4" to 4" diameter to fit most sanders.

• COMPATIBILITY: Fits JET JBOS-5 Sander.
• MEDIUM ABRASIVE: 150-grit, aluminum oxide sleeves.
• MULTIPACK: Includes four sleeves.

Product description

Introducing the 4.5 Inch Sanding Sleeves Assortment Pack by POWERTEC.   These spindle sander sleeves variety pack was designed to give your surfaces the perfect finish they deserve.  Commonly used for sanding & polishing curves, material removal and resurfacing, these sander accessories work effectively on a wide variety of non-ferrous metal based and woodworking projects.   Constructed out of aluminum oxide, these high performance abrasive sleeves feature a superior quality grain that delivers precision and professional quality results. This cost effective combo pack includes 4-1/2-Inch sandpaper sanding sleeves in 6 sizes and in three different grits to ensure you have exactly what you need in for perfect woodworking craftsmanship.     COMPATIBILITYFor use with most oscillating and spindle sanders.For best results and brand specific match, search Amazon for POWERTEC MODEL OS1400 & OS1000  In 6 Different Diameters: 1/2 Inch 3/4 Inch1 Inch1-1/2 Inch2 Inch3 Inch   Assorted Grits:80 grit sleeves120 grit sleeves240 grit sleeves POWERTEC is a professional manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.

• INCLUDES: Professional grade aluminum oxide sanding sleeves in 3 grits ( 80, 120, 240 ) and six sizes ( 1/2", 3/4", 1", 1-1/2", 2" and 3" ) – Pack of 18
• PERFECT FIT: These 4 ½ inch long spindle sander sleeves fit directly over the rubber sanding drum metal shaft
• PROFESSIONAL FINISH: Perfect oscillating sanders for woodworking projects, and used for sanding, resurfacing, abrading and polishing some metals and most soft and hard woods
• MADE TO LAST: Each sanding sleeve is carefully constructed from premium aluminum oxide to increase longevity and prevent loading
• COMPATIBILITY: Works with oscillating spindle sanders, including models from POWERTEC (item# OS1400, OS1000), Delta, Grizzly, Jet, Ryobi, and Wen

User questions & answers

Question:	Does this include the washers required for compression
Answer:	No. You can buy those from any hardware store.
Question:	Will these fit a Ryobi OSS450 oscillating sander
Answer:	If you have a Harbor Freight store in your area buy a set of 5 sanding sleeves. If they fit the Ryobi sander (they probably will) then the PowerTec rubber drums will fit. Hint: Rub very fine sawdust on the rubber drums before sliding the sanding sleeves on.
Question:	will these drums work with a drill press
Answer:	Possibly if you have an arbor that will fit in your drill press that you can mount the drums on.
Question:	Do these fit the ridgid eb
Answer:	The five drums in the Powertec Oscillating Drum Set are 4-1/2” long and are designed to works on with 1/2” spindles. Our research indicates that four of the five drums will work on the Ridgid EB4424. The 3” drum appears to be too large to work in the opening of the Ridgid sander.

Product features

POWERTEC Oscillating Sander Rubber Drum, 3/4", 1", 1-1/2", 2", 3", 5/PK

Fit Powertec OS1000, Masterforce 2400056, Sears 21500, Grizzly G0723.

Fit Most Oscillating Sanders in the market.

Package Dimensions: 6.2 x 5 x 3.8 inches

Item Weight: 1.5 pounds

Product description

Introducing the 4.5 Inch Sanding Sleeves by POWERTEC . These spindle sander sleeves were designed to give your surfaces the perfect finish they deserve. Commonly used for sanding polishing curves, material removal and resurfacing, these sander accessories work effectively on a wide variety of non-ferrous metal based and woodworking projects. Constructed out of aluminum oxide, these high performance abrasive sleeves feature a superior quality grain that delivers precision and professional quality results. This cost effective combo includes three 120 grit sandpaper sanding sleeves. COMPATIBILITY For use with most oscillating and spindle sanders. For best results and brand specific match, search Amazon for POWERTEC MODEL OS1400 OS1000 POWERTEC is a US based manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.

• INCLUDES: Professional grade aluminum oxide (120 grit) sanding sleeves 4-1/2” x 3” Diameter – Pack of 3
• SIZE: These 4 ½ inch long spindle sander sleeves fit directly over the rubber sanding drum metal shaft
• PROFESSIONAL FINISH: Perfect oscillating sanders for woodworking projects, and used for sanding, resurfacing, abrading and polishing some metals and most soft and hard woods
• MADE TO LAST: Constructed from aluminum oxide to increase longevity and prevent loading
• COMPATIBILITY: Works with oscillating spindle sanders, including models from POWERTEC (item# OS1400, OS1000), Delta, Grizzly, Jet, Ryobi, and Wen

User questions & answers

Question:	what is the actual inside diameter of these sleeves
Answer:	Don’t know. They will fit 1/2” dia. spindle. Measure your spindle dia. and length for your answer.
Question:	can I get this size in 80 grit
Answer:	They will fit any spindle that is 4 1/2 inches long and the diameters stated as long as your spindle can be tightened To make the rubber expand. I’m sure it can be made to fit many makes of units.
Question:	can i use this on metal
Answer:	I did buy some rubber drums for the sleeves. It appears that I bought them from Amazon with the sleeves. It looks like I bought the POWERTEC Oscillating Sander Rubber Drum, 3/4", 1", 1-1/2", 2", 3", 5/PK for my Oscillating Sander. It has a 1/2" spindle so to place them in a drill press you will have to be able to handle that size arbor for the drums. If you cannot handle the 1/2" in the drill press, you will have to adapt another method to accomplish what you need.
Question:	does it fit a ridgit sander
Answer:	Yes. It comes with its own mounting system of rubber drums and shafts that fit into a Dremel with the correct size collet.

Product features

POWERTEC 11210

• Length: 4-1/2-Inch
• Diameter: 1/2-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11211

• Length: 4-1/2-Inch
• Diameter: 3/4-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11212

• Length: 4-1/2-Inch
• Diameter: 1-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11213

• Length: 4-1/2-Inch
• Diameter: 1-1/2-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11214

• Length: 4-1/2-Inch
• Diameter: 2-inch
• Sanding Grit: 120
• Pack of 3

POWERTEC 11215

• Length: 4-1/2-Inch
• Diameter: 3-inch
• Sanding Grit: 120
• Pack of 3

Product description

Remember when you had to sand those rough edges by hand? Give your surfaces The finish They deserve with the WEN spindle sanding sleeves. Designed for use with the WEN HA5932 handheld oscillating spindle sander, this set includes four 80-Grit sleeves, four 120-grit sleeves and four 240-grit sleeves to meet a variety of applications. Each grit includes a total of four different diameter sleeves: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2-inch diameter sleeves. Each spindle measures in at 3 inches in length.

• Includes four 80-grit sleeves, four 120-grit sleeves and four 240-grit sleeves
• Features a 1/2-inch, 3/4-inch, 1-inch, and 1-1/2-inch diameter sleeve in each grit
• Each sanding sleeve measures in at 3 inches in length
• Perfect for material removal, resurfacing and more
• Designed to fit the WEN HA5932 handheld Oscillating spindle sander

User questions & answers

Question:	Does it have the inserts that go around the smaller sleves (1/2") so you can stand smaller things or are smaller things going to fall into it
Answer:	Two or three would fit my Jet mandrels but the rest did not, seem to be different diameters. They are also about an inch shorter than the factory Jet sleeves. I don't think these are the correct ones for the Jet.
Question:	Could you use a 2" sanding sleeve with this sander
Answer:	You will have to do your own search.
Question:	What kind of sandpaper are these, garnet? Aluminum oxide
Answer:	They are 4 1/2 inches long. Have not used any of them yet, so I do not know how well they work or how long them might last.
Question:	Does this sander use standard sanding sleaves
Answer:	Some of these will be compatible, but not all. I believe the Shop Fox drill press comes with 1-Inch, 1.5-Inch and 2-Inch drums

Product description

Big Horn 19542 9-piece 1-Inch dia by 3-Inch replacement sleeves are designed to be used with Big Horn 19540 9-Piece Super Long Sanding Drum Set, sold separately. All sanding drum kits feature aluminum oxide resin bond spiral no-lap sleeves. Self expanding rubber cushioned drums have 1/4" shank. Excellent for sanding holes, edges, contours, irregular shapes and wider surfaces. Each set includes 1 set of replacement sleeves.

• 1-Inch dia by 3-Inch replacement sleeves are designed to be used with Big Horn 19540 9-Piece Super Long Sanding Drum Set (sold separately)
• No-lap aluminum oxide resin bond sleeves | Excellent for sanding holes, edges, contours, and irregular shapes
• Made by Climax Metal Products | Made in USA
• Comes in a Plastic Bag
• Includes: 3 x 50 Grit - Coarse | 3 x 80 Grit - Medium | 3 x 120 Grit - Fine

Product description

Dark Stone’s Sanding Sleeves will provide an excellent finish on your woodworking projects. Our durable Aluminum Oxide coating formulation is designed to provide top performance in your sanding projects. Dark Stone’s Sanding Sleeves will fit most of the Oscillating Sanders in the market including Ryobi, Jet, Delta, Grizzly and more.

• 240 Grit Aluminum Oxide
• Sanding Sleeves are 4-1/2 Inches in Length
• Sleeve Diameters is 1”
• Pack of 6
• Fits most Oscillating Sanders in the market