11 best hanson drills

Product description

These brad point drill bits are excellent for both home repair and woodworking use. The brad point bits have a center point design that keeps the drill bit from skating as it enters the wood resulting in perfectly smooth, splinter-free holes. The drill bits come organized inside a durable case with Index.

• These brad point drill bits are excellent for both home repair and woodworking use
• This product meets customer requirement
• Product is easy to use

User questions & answers

Question:	Is this metric or sae? product information says metric but the photos are in sae
Answer:	My set is SAE
Question:	are these brad point bits/the irwin product number describes this to be 135 degree split pt, as the picture represents but description says brad pt
Answer:	Split point
Question:	These say brad point cobalt, do they even know what a brad point is ? brad point is for wood, cobalt is for steel, in pic, def. not brad, so what are
Answer:	The description is wrong but the pictures are correct. They are not Brad points.
Question:	Do you just charge whatever you want? Up $50 in 4 days
Answer:	You have to understand that EACH AND EVERY ITEM in the amazon catalog is offered by Amazon, and third party sellers. Once one seller (say Amazon) runs out of inventory, the "buy Box" goes to the next seller in line with the next lowest price. This continues until nobody has it in stock.

Product description

The IRWIN HANSON Spiral Extractor and Drill Bit Set, 10 Piece, features an aggressive left hand design for extra gripping power. Easy out style spiral flutes embed themselves deeper into the metal as the tool is turned so grip increases as resistance increases. With sizes etched onto each tool for quick identification, it includes EX-1, EX-2, EX-3, EX-4, and EX-5 extractors; 5/64", 7/64", 5/32", 1/4", and 19/64" drill bits and a metal index case.

• Designed to remove broken studs, bolts, socket screws, and fittings
• Aggressive left hand spiral design for extra gripping power
• Easy out style spiral flutes embed themselves to increase grip as resistance increases
• Extractor size and recommended drill bit size are etched on each tool
• Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5; drill bit sizes 5/64", 7/64", 5/32", 1/4", 19/64", and a metal index case

User questions & answers

Question:	Are the bottom of the reverse drill bits hexagonal or smooth
Answer:	The reverse drill bit it smooth. The extractor is square.
Question:	made in USA
Answer:	Made in USA of "foreign components."
Question:	Can someone tell me where these are made, what does it say on the box? TY
Answer:	They seem to be made in several places, I assume the case was made in China. The left hand drill bits are stamped Brazil, and the extractors say USA.
Question:	Are these left-handed drill bits as well? If not they should be a lot of time when the drill bit bites the screw comes out
Answer:	Just to be clear, 'Bob Vila "Tool Junkie"' is evidently describing a different tool than the one I see currently, and the one other answers to this question are talking about. The current picture shows a set of drill bits along with the spiral extractors — NOT the square type that 'Bob' is talking about. And if you look closely at the drill bits, you can see that they spiral in the opposite direction compared to standard drill bits. That is to say, these are left-handed drill bits.

Product features

IRWIN HANSON Spiral Extractor and Drill Bit Set, 10 Piece

IRWIN HANSON Spiral Extractors and Drill Bits have spiral flutes that embed themselves deeper into metal as they drill. This aggressive design increases grip as resistance increases to generate even more fastener-removing power.

Frees Fasteners Fast

The IRWIN HANSON 10 Piece Kit gets the most commonly used fastener sizes unstuck quickly and efficiently.

10 Sizes

The perfect starter set for extracting fasteners, this set contains 5 extractors and 5 drill bits.

Aggressive Design

Reverse spiral fluting digs deeply into stubborn fasteners with extra gripping power.

Etched Sizes

Finding the exact tool you need is easy with sizes etched onto each extractor and drill bit.

Product description

This IRWIN HANSON 13-Piece Tap and Drill Bit Set features drill and tap combinations that produce a thread that is strong and easy to tap. The high-carbon steel plug taps are great for general-purpose threading, while the 135° split-point drill bits help give fast, precise drilling. The drill bit set includes a plastic storage case.

• Country Of Origin: United States
• Model Number: 80187
• Item Package Dimension: 8.7" L x 7.8" W x 4.1" H
• Item Package Weight: 2.1 lb

User questions & answers

Question:	can these be used to put threads in wood
Answer:	They could but such an application is odd. You want a metal wood insert or similar. Take a look at these Amazon parts instead http://www.amazon.com/b?ie=UTF8&node=16410701#

Product description

SAD13HD drill set 1/16-Inch - 1/4-Inch by 64ths Thunderbit Premium Grade Steel with Heavy-duty construction High Speed Steel, Black and Bronze Oxide coated, Jobbers Length Drill, 135 -Degree split point.

• High Speed Steel for general purpose drilling in a variety of materials
• Jobbers Length Drill - most common overall length
• 135 -Degree split point to help prevent drill -Inchwalking-Inch
• Made in the U.S.A.
• 1/16-Inch - 1/4-Inch by 64ths drills with round Select-A-Drill plastic index

Product description

Lock & Hardware Drill & Tap Set includes: Plug Taps in sizes (4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 -24 NC, 10 - 32 NF, 1/4" - 20 NC) and Drill Bits in sizes (No. 43, No. 35, No. 29, No. 25, No. 21, No. 7)

Product features

From The Book: Your Brain, Basic Facts

Your brain is three pounds of tofu-like tissue containing 1.1 trillion cells, including 100 billion neurons. On average, each neuron receives about five thousand connections, called synapses, from other neurons (Linden 2007).

At its receiving synapses, a neuron gets signals usually as a burst of chemicals called neurotransmitters from other neurons. Signals tell a neuron either to fire or not; whether it fires depends mainly on the combination of signals it receives each moment. In turn, when a neuron fires, it sends signals to other neurons through its transmitting synapses, telling them to fire or not.

A typical neuron fires 5–50 times a second. In the time it takes you to read the bullet points in this box, literally quadrillions of signals will travel inside your head.

Find out more in Buddha’s Brain.

Product description

The IRWIN HANSON Master Extraction Set, 48 Piece, includes easy out style spiral flute extractors, multi-spline extractors, bolt extractors, and left-hand cobalt drill bits for removing almost any stuck fastener quickly. Spiral flute extractors are perfect for common fasteners where lower torque is all that is required for removal. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The set also includes left-hand cobalt drill bits for fasteners that must be completely drilled out to be removed. This set consists of a carrying case, 6 easy out style spiral flute extractors, 13 multi-spline extractors, 13 bolt extractors, and 16 left-hand cobalt drill bits.

From the Manufacturer

Irwin Industrial Tools 3101010 48-Piece Screw Extractor/Drill Master Set. Designed to remove broken studs, bolts, socket screws and fittings for high torque applications

• Includes spiral flute extractors, multi-spline extractors, bolt extractors, and left-hand cobalt drill bits for extracting all kinds of fasteners
• Easy out style spiral flute extractors for use on common fasteners and lower torque
• Multi-spline extractors for higher torque or lower profile tools
• Bolt extractors for freeing partly-exposed fasteners
• Left-hand cobalt drill bits for drilling out interiors of fasteners

User questions & answers

Question:	Does this set include a 15 mm hex head extractor
Answer:	No, the IRWIN 3101010 does not include a 15mm hex head extractor.
Question:	Whats the size for the smallest 3 bits (or all). 2 are broken and all 3 small bits are chewed up from drill motors
Answer:	EX-1, EX-2, EX-3, EX-4, EX-5, EX-6, 1.8, 5.32, 3.16, 7.32, 1.4, 9.32, 5.16, 11.32, 3.8, 13.32, 7.16, 15.32, 1.2, 1.4, 5.16-8mm, 3.8, 10mm, 7.16-11mm, 12mm, 1.2, 13mm, 9.16-14mm, 5.8-16mm, 17mm, 11.16, 3.4-19mm Email IRWIN and see what they will do for you.
Question:	Bolt extractors standard or metric? Or is it such that these extractors can be used to remove both standard and metric bolts
Answer:	Thank you for contacting Irwin Tools. We strive to provide the highest quality of customer service. This set has both fractional and metric extractors, so it can remove both.
Question:	where is it made
Answer:	Older sets may have been made completely in the U.S., but now are partially filled with parts that are "globally sourced". That can be fine as long as they meet specifications (including hardened steel) for these parts. It appears to offer several different types of extractors so you have options if one style doesn't work for an application. These extractors and drill bits work well on steel fasteners; if you need to remove brass, copper or plastics fittings, you'll need to get one of the kits that have the four-sided tapered extractors, such as Irwin Hanson 53645 (or similar). Those extractors will bite into the softer materials and ease removal. Unlike the former types, these latter extractors will not expand soft fasteners during removal.

Product features

IRWIN HANSON Master Extraction Set, 48 Piece, 3101010

The IRWIN HANSON Master Extraction Set is the serious solution for stuck fasteners with four different types of extractors that provide the extra gripping power needed to remove problem fasteners without damaging the workpiece.

Spiral Design

Bites into harder materials with increasing torque as flutes embed deeper with each turn.

Low Profile

Perfect for use in small areas providing the most torque while engaging without a deep hole.

For Rusted, Painted, and Stripped Bolts

Driven by a variety of tools, it grips broken, worn, and stubborn fasteners

Drill Fasteners out

Drilling out the interior of can often release the fastener by itself.

Product description

All drills can be used for cutting metal, plastic, wood, etc. Quality Cobalt high speed steel M35 or M42 ensures sharp and fast execution in any material for clean results. Premium Heat treated is durable and can withstand heavy duty operation for a long tool life. Golden Color Surface Treatment holds up lubricant better for smoother drilling. Precision ground with geometry of 135 degree chisel with split point for quick penetration and an accurate start.



MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and more



MaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We offer our products worldwide, unless otherwise restricted by our suppliers



In addition, MaxTool offers re-sharpening services and custom tooling solutions



MaxTool warmly welcomes everyone to visit our Amazon Store, and honestly appreciates everyone very much to give a cooperative chance to discuss your requirement



MaxTool will do the best to make each buyer satisfaction. You can always rely on MaxTool



MaxTool’s slogan is Consistent Quality



MaxTool! ToolMax!

• Drill bits include: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2 inch, 1/16 (0.0625) to 1/2" (0.5) in 1/64" increments
• Premium 8% Cobalt High Speed Steel M42 (Hardness up to HRC66) provides all drills power cutting, impressive performace and long tool life
• Precision fully ground edges and flutes ensure fast drilling, excellent chips moving smoothly and ultimate accuracy
• Golden surface finish resists corrosion and increases the hardness of the drill bits for cutting hard steel, other metals, wood, and plastic
• 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole

User questions & answers

Question:	The 8pc silver and deming drill bit set (9/16- 1" ) from Max tool Corp. is it also on Amazon
Answer:	Currently we just have seller fulfillment. We have several sets on hand.
Question:	Do you have any maxlool dill sets that are bigger than 29 pc
Answer:	We have 8pcs Silver and Deming Drill Bits with size range from 9/16" to 1" by 16th step.
Question:	What is the length of the largest bit
Answer:	The largest bit is six inches long.
Question:	Is it made in the USA
Answer:	Made in China.

Product description

T17HDDC drill set 1/16-Inch - 1/2-Inch by 64ths drills, Thunderbit Premium Grade Steel with Heavy-duty construction Drill Set High Speed Steel, Black and Bronze Oxide coated, 135 -Degree split point.

• High Speed Steel for general purpose drilling in a variety of materials
• Unique flute geometry to aid in chip evacuation
• 135 -Degree split point to help prevent drill -Inchwalking-Inch
• Made in the U.S.A.
• 1/16-Inch - 1/2-Inch by 64ths drills with Clip-On round plastic index

Product description

Drill Hog is proud to release the newest technology in left hand drill bits. These bits are left handed meaning the flutes run in the opposite direction (counter clockwise). Left hand drills are used to remove broken bolts, screws, and studs just like an easy out.

These drills are made from Niobium which has a melting point of 4,476° degrees Fahrenheit! These bits will drill through the toughest steel like truck frames, stainless steel, farm implements, spring steel, grade 8 bolts, and more!

• 1/16 to 1/4 by 1/64ths (Does not skip any sizes)
• Niobium Nb41 Steel
• Left Hand Thread (Flutes are Counterclockwise)
• Used for Removing Broken Bolt, Screws, and Studs
• Made by Drill Hog USA

User questions & answers

Question:	Do these drill bits come with a lifetime warranty like other drill hog but sets
Answer:	Drill Hog's 13 Pc Niobium & 13 Pc Cobalt sets both come with a lifetime warranties which the buyer activates via a Url website address & a serial number that are inside the drill set package. This website lists a US mail address (but NO phone number or e-mail address) that the customer can then subsequently contact to request Drill Hog provide a replacement drill bit.
Question:	Do u warrant all sizes or just 1/4 and above like tool truck
Answer:	I'm a customer, not the seller or manufacturer. You need to ask the Drill Hog folks.
Question:	are they made in usa
Answer:	Yes the Drill Hog tools are made in the USA
Question:	are these hex head? And if not is there a hex head to this drill bit adapter
Answer:	No hex head, just regular drill bits with a reverse twist.