13 best drill driver bits

Product description

DEWALT DWA2T40IR 40 Piece Impact Ready Screw driving Set is part of the DEWALT Flexor line of power tool accessories. Flexor allows bits to flex up to 15 degrees which equals increased durability and reduced breakage for longer bit life. This set allows you to maximize you Impact ready system. It features a 10x Magnetic Screw Lock System for strong fastener retention and is preferred by professionals everywhere. The bits are placed directly in the impact driver; No run out and allows for access areas. It also minimizes drops and reduces wobbling. This set features a full range of sizes, from 2 inch to 6 inch screw driving bits and are removable to be used across a full bit set. These bits are durable and jobsite tough. Set includes: 3/8" Untested, 1/4" Untested, 5/16" Untested, Impact Ready Sleeve, 3" Impact Ready Screw Lock Holder, 2" PH2 Impact Ready Bits, 2" SQ2 Impact Ready Bit, 2" T25 Impact Ready Bit, 2" SL8 Impact Ready Bit, 1" PH2 Bits, 1" SL8 Impact Ready Bits, 1" SL6 Impact Ready Bit, 1" PH1 Impact Ready Bit, 1" PH3 Impact Ready Bit, 1" SL10 Impact Ready Bit, 1" PH2, 1" T15 Impact Ready Bit, 1" T20 Impact Ready Bit, 1" T25 Impact Ready Bit, 1" T30 Impact Ready Bit, 1" SQ2 Impact Ready Bits, 1" SQ3 Impact Ready Bit, 1" SQ1 Impact Ready Bit, 3.5" PH2 Impact Ready Bit.

• Minimizes drops
• Reduces wobbles & breakage
• FlexTorq allows bits to flex up to 15 degrees
• 10x magnetic screw lock system
• Minimizes drops and reduces wobbling
• Reduces breakage and longer life

User questions & answers

Question:	Can I use this with regular drill (not an impact driver
Answer:	YEP! In fact, I use the speed loader to make using my regular drill/driver faster. The Magnet holds the different bits I'm going between.
Question:	are the individual bits magnetic
Answer:	The individual bits are not magnetic. The 1/4' and 5/16" adapters, the bit extender, and of course the magnetic screw holder are. If you use any of these (except the 5/16" adapter) with the bits, then the bits will exhibit magnetic characteristics as well.
Question:	where is made
Answer:	Holder and socket adapter made in Taiwan. The rest is made in Vietnam.
Question:	This may sound really dumb, but how does one remove a bit from the magnetic holder that was in its own bubble, the "magnetic screw lock sleeve
Answer:	I just got mine today. That bit pulls out from the back. I had to wiggle it around quite a bit, and then it came out. It gets easier after you do it a few times. It took me a minute to figure out how to use it. The bits push in from the back, you only use the long bits. It only made sense once I put it in my screw gun. The sleeve slides back on the bit enough to expose the tip. Then you can put a screw on it, and the magnet/sleeve holds the screw in place. That's their theory at least lol. I haven't tried it yet. It seems a little awkward, but I guess you could get used to it if you're putting in a bunch of screws.

Product features

DEWALT DWA2T40IR Impact Ready FlexTorq Screw Driving Set, 40-Piece

Designed for tough jobsite duties, the Impact Ready bits deliver the power, precision and dependability required to handle even the toughest jobs. Complete with an assortment of various bit tips and sizes commonly used on the jobsite, this bit set is the ultimate resource for any handyman, professional or DIYer.

Product description

The DEWALT DW2166 45-piece screw-driving set with tough case includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended screwdriver bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits. The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

From the Manufacturer

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

• Value: Dollar 40 value vs. purchasing separately
• Bit retention: Tough case container bit retention system keeps bits secure
• Magnetic drive guide: Magnetic drive guide reduces stripping and wobbling
• Bit fit: Includes 12 double ended bits
• Bit tip count: 54 total tips. Clip latch for secure closing
• Steel bits: Hardened steel screwdriver bits
• Durable case: Comes in a strong and durable case

User questions & answers

Question:	Are these strong enough to not strip after being used multiple times? I feel mine always do with just a few uses
Answer:	They are hardened steel. I've used mine on some screws with stripped heads (which would have chewed up the bit if it hadn't been hardened steel). They are hardened and they don't get chewed up. I've had no issues with mine.
Question:	Do u have to have a drill
Answer:	You could probably put it in a Yankee but the drill would be much more up to date.
Question:	Will the bits fit your standard electric drill? My drill is nit a DeWalt brand. Thank you
Answer:	Yes, they will BUT, these aren't really designed for use in an electric drill, these are designed for use in 1/4" hex bit screwdrivers primarily.
Question:	What's the trick in getting these bits back into their plastic holding place? It seems to only bend the plastic
Answer:	Contrary to some answers, the case is very well designed and there is a very simple way of getting the bits back into the case. All you have to do is turn the bit with the flat sides to either side (pointy side to the front , back) then slide it down into the empty slotted area; there should be no resistance if done correctly. The simply push the bits back down seating it into the holder. It's as simple as that.

Product features

DEWALT DW2166 45-Piece Screwdriving Set With Tough Case

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits.

• ULTIMATE SET: 208 Pieces including Nut Drivers, Security Bits, Torx, Slotted, Phillips, and other Specialty Bits in commonly used sizes.
• BUILT FOR WORK: Made of high grade carbon steel (50BV30 & 6150 Grade), sand blasted bits that are made to last.
• PRACTICAL: Comes in a hard plastic case and includes multiples of the most common bit sizes so you can keep working. Labeled slots to keep bits organized.
• QUICK CHANGE: adapter included to allow fast changes between sizes.
• GUARANTEED: Try our Jackson Palmer Driver Bit Set with NO RISK and 100% Money Back - No Questions Asked.

User questions & answers

Question:	Why no triangle bits. worthless. i dont need 100 flat and phillips fml
Answer:	It does list all of the included bits.
Question:	Will it work with impact driver
Answer:	This is designed to work with any version of drills. Is does not come with an adapter for a impact driver.
Question:	Does it work with an ikea fixa screwdriver
Answer:	Very likley
Question:	Are the bits magnetic
Answer:	The bits themselves are not. Nor should they be. Use a magnetic bit holder and you're in business.

Product features

Jackson Palmer 208 Piece Ultimate Screwdriver Bit Set

Made of sand-blasted high grade carbon steel, these bits are built to stand up to any project. Quick change adapter is included for fast switching between sizes. Each set includes:

Product description

IMPACT READY accessories deliver exceptional performance for extreme torque applications. FlexTorq bits feature an Extended FlexTorq Zone to transfer optimal torque in hard joint applications, providing durability & longer life. The bit tip is CNC machined for a precise fit, reducing cam-out under torque.

• Connectable accessory storage system to optimize storage space
• Clear lid allows you to easily see contents at glance
• Small Bulk Storage size fits inside the Small and Medium ToughCase+ (sold separately) - Ideal for organizing loose bits
• Extended FlexTorq Zone* transfers optimal torque
• Patented bit-bar design allows easy removal of bits and customizable placement

Product description

The BLACK & DECKER BDA91109 109pc Combination Accessory Set contains the ideal sizes of components for frequent use projects and installation. It offers a variety of drill bits for the most common uses with wood, metal, plastic and masonry. Along with the drill bits, it also contains a variety of 2-Inch and 1-Inch screwdriving bits for household projects. This convenient kit also comes with a durable, portable hard case with extra storage.

• Variety of Drill Bits for wood, metal, plastic and masonry
• Variety of 1-Inch and 2-Inch screw driving bits
• Portable hard storage case
• Ideal size of components for all types of projects
• Variety of Drill Bits for wood, metal, plastic and masonry
• Variety of 1-Inch and 2-Inch screwdriving bits
• Portable hard storage case
• Ideal size of components for all types of projects

User questions & answers

Question:	does it have 3/8 inch drill bit
Answer:	Yes, as well as 5/16, 1/4, 3/16 and 1/8 + 26 other drill bits all the way down to 1/16. Fantastic set.
Question:	Does this fit makita drill
Answer:	These bits (etc.) will fit any screw/drill driver.
Question:	does this fit the Black & Decker BDCD220IA 20-volt Max Drill/Driver and Impact Driver with 2-Battery
Answer:	These fit any standard interchangeable Bit drills. Most all drills have a bit holder capable of being adjusted to fit bits and these are all standardized universal.
Question:	do these bits have the hex base, to go in a drill/driver
Answer:	I concur with Informed Buyer. The drill bits are smooth cylinder base and the screw bits are hex base. There are customer pictures you can view to verify this. Please advise. (Side note) I bought this in 2013 for 24$, it's on sale as of right now for 18$.

Product features

Features + Benefits

• Variety of drill bits for use in wood, metal, plastic and masonry
• Ideal sizes of components for frequent use projects and installation
• Variety of 2" and 1" screwdriving bits for household projects
• Durable, portable hard case with extra storage

Product description

Get one convenient set of bits and sockets for drilling, driving and fastening in one convenient carrying case with the Makita 75-piece metric drill and screw bit set (B-49373). The set includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications. Fastening applications are covered with an assortment of Phillips, Pozidriv, Torx, slotted and hex insert bits. The set also includes titanium nitride coated high-speed steel (HSS-tin) metal and wood drill bits, brad point wood drill bits, and masonry hammer drill bits with straight shank for use with most 3/8” and ½” drills. The kit also includes a center punch, ¼” hex countersink, ¼” hex Nut drivers, and a ¼” hex magnetic bit holder.

• Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
• Includes Phillips, Pozidriv, Torx and slotted insert bits
• Includes Phillips, Pozidriv, Torx, slotted, and hex power bits
• Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
• Includes Brad point wood drill bits with size range of (4 - 8 millimetre)

User questions & answers

Question:	Hello, can you ship to Israel
Answer:	I'm traveling to Israel in February. I'll bring one with me. Meet me at the airport.
Question:	will this product work the makita TD090D impact drill
Answer:	no it,s made for drill,no impact drill
Question:	Is there an imperial unit version of this kit
Answer:	If there is I wish I'd bought that one.
Question:	where is it made
Answer:	The set is all made in China. The screwdriver bits are tempered to be very hard and tough. They’re outlasting many of my industrial brand bits and are among the best for finish quality of any bit’s I own. They’re very well made and the quality control is great. The twist drill bits are very good and though not quite as well made as expensive industrial quality drill bits, they’re a good value in my opinion and are holding up well to mild steel drilling.

Product features

Makita B-49373 75 PC Metric Drill and Screw Bit Set

Makita B-49373 is so convenient that it will solve all your maintenance queries in a jiffy. The wide range of 75 Pc. comprises Drill set for drilling into every possible materials such as metal, wood, cement walls etc. It also includes Inserted Bits and Power Bits for fixing and fastening.

Less time, more job done

With the Makita tool kit by your side, you are sure to get your work done. As the kit comes with an option of different tools, it saves you the effort of having multiple tool kits for different maintenance jobs. As all your drill and screw bits are organized in one place, you just have to focus on the job in hand without worrying about searching for the correct screw bit. It is built to endure any kind of tough task.

Easy to Carry and Use

As the multi-bit set comes with a portable case you can carry it anywhere you go. As it offers a wide range of insert bits and power bits that is compactly packed in an easy to carry box, it is just the perfect companion in your emergencies.

Perfect gift for new homeowner

Setting up a new home is never easy. With so many setting up jobs at hand, one needs that one kit that is compact, easy to carry yet utilitarian. The Metric Drill And Screw Bit Set is one such gift that is going to come handy while running errands of the initial setup.

Product description

Bosch impact tough impact, driver bits have been upgraded to deliver 10x life over standard impact bits. With an extended torsion zone, precision engineering and heat-treated manufacturing process, these bits deliver tough torque and power for longer – and with less came out. These impact tough bits are an impact-rated line of screw driving bits, double-ended bits, nut setters, sockets and bit holders that have been enhanced to handle a new generation of higher torque impact drivers. These bits also come with high-visibility sleeves for greater user convenience.

• 10x life over standard impact bits
• Extended torsion zone helps to absorb the high torque of new impact drivers
• Advanced design provides a secure fit
• Heat treated manufacturing for increased durability
• High visibility sleeve with laser etched markings for user convenience

User questions & answers

Question:	Does this wobble like every other quick change ever created
Answer:	"Hi there! The ITBHQC2021 Bit Holder may wobble a bit but not too much. If you encounter bit wobbling using this bit holder, please contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST. "
Question:	Can these fit in a sds plus drive
Answer:	I am not exactly sure what an sds plus drive is, this is a typical impact driver bit. I did find this item on Amazon SDS to 1/4" Hex Driver Bit Adaptor Converter for SDS + Plus so you might need it to convert. Sorry I couldn't help more.
Question:	does this bit holder have a magnet to secure the bit
Answer:	Thank you for your question. The ITBHQC2012 Change bit holder is magnetic to secure the bit. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Question:	Is this a one hand action where you push the bit in and it locks? Or, do you need to lift collar, load, then release collar
Answer:	Thank you for your question. The ITBHQC201 Bit Holder is a quick release. You just need to push the bit in and push the collar to release the bit. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Extended Torsion Zone

Absorbs torque peaks to reduce breakage and comes with high-visibility sleeves for greater user convenience.

Long Life

Impact Driver Bits have been upgraded to deliver 10X life over standard impact bits.

Improved Visibility of Bits

The silver sleeve on the bit is designed for better visibility, in the toolbox or on the ground. Laser markings on the bit clearly identify bit type and are easier to read than stamped scripts.

Less Cam-out

CNC (Computer Numerical Control) manufactured precision-engineered tips have less cam-out than traditional forged tips.

Impact Tough Drilling Bits

Impact Tough Drill Bits delivered impact-rated shank for higher torque impact impact drills, longer flutes for effective material removal and the no skate tip offers a clean start.

Impact Tough Multi-Material Bits

The All-in-One for hammer drills and impact drivers.

Impact Tough Hole Saw

Clean, fast cutting even in impact mode.

• HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
• Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.
• Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck.
• Meet Your Demands - Great drill bits set for metal/wood/plastic countersink. Suitable for Home DIY, and General Building/Engineering Use.
• Organized Holder - A drill bits holder with size index is included in the set for easy storage and organizing. The drill bits set fits the majority of brands currently on the market.

User questions & answers

Question:	Will these work on Tacklife cordless drill
Answer:	Yes, very good the will not spin on drill chuck.
Question:	Does this work with a dewalt 20v max and can it drill through metal
Answer:	I should work fine with your drill either chucked or with a snap adapter. I have used mine in wood and aluminum with very good results but have not tried with steel.
Question:	Are they just for aluminium? Are they designed for soft steel
Answer:	No you can use them on wood, steel, aluminum, plastics and just about everything.
Question:	Could I use one of these bits to drill holes for mounting taxidermy birds
Answer:	Yes, but avoid using them to drill peep holes into the adjoining motel room.

Product features

COMOWARE Titanium Twist Drill Bit Set

Material: HSS , Titanium Coating

Angle Point: 135 Degree

Flute Type: Spiral

Shank Type: Hex Shank

Product description

Specifications:

Material: chrome vanadium steel

Shank length: 2.2cm

Shank diameter: 1/4 inch (6.35mm)

Socket diameter:

SAE(7pc): 3/16", 1/4", 9/32, 5/16", 11/32", 3/8",7/16"

Metric(7pc): 5, 5.5, 6, 7, 8, 10, 12mm

Quantity: 1 Set (14pcs)

• This Nuts tools without magnetic !!! 1/4" Shank fits most powered corded or cordless drills,Strong inner Hexagon sleeve
• Hex-Shank length: approx. 2.2cm, Shank diameter: 1/4 inch (6.35mm)
• Specifications：3/16(4.76mm),1/4(6.35mm),9/32(7.14mm),5/16(7.93mm),11/32(8.73mm),3/8(9.53mm),7/16(11.11mm) 5mm,5.5 mm,6mm,7mm,8mm,10mm,12mm
• It's widely used in household DIY, auto parts, woodworking, professional machine repairing, etc.
• Package Included: 1 x 14pcs power Nuts Tools Driver Drill Bit Set Metric Socket Wrench Screw 1/4" Hex Drill nut driver set

User questions & answers

Question:	Has anyone else received this product with the numbers/sizes and logo almost completely smudged to the point you can't make out most of it
Answer:	No. I can read mine without my glasses.
Question:	Will these bits fit any drill? or does it have to be a specific brand or model? Do I need anything else to go along with this product
Answer:	Universal 1/4 in. hex shanks fit quick-change chucks and any drill, driver, or screwgun
Question:	Does this include a driver to manually screw and unscrew bolts with these sockets? Not seeing it in the pictures
Answer:	Hi-...No driver...neros
Question:	Will this fit my 1/4 milwaukee impact
Answer:	It’ll fit in the impact, but it won’t lock it. It lacks the divot in the shank.

Product description

Impactx is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional contractor. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard Screwdriving bits are brittle and fit poorly into fasteners, and in applications with high torque impact drivers this losing combo quickly leads to broken bits. Impactx hits back with improved Fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.

• Precision machined tips with superior fitment for full contact fit and longer life
• Performance optimized S2 steel construction for extended life
• Calibrated heat treating process for added durability
• Manganese phosphate surface for advanced corrosion resistance
• Optimal geometry for an ideal fit and improved holding power

User questions & answers

Question:	Will the bits stay in place in the case? I bought a set of these 4 years ago and everytime I opened it the bits were all jumbled up, great bits though
Answer:	They stay firmly in place. At two seperate points when pressing the bit into place, you feel resistance. When it stops the second time it isn't going anywhere
Question:	How do you remove the retainer rings from the mbh
Answer:	I will refrain from saying "Practice, practice, practice." ;o) It's a bit of a PITA, but still doable. You'll need: - A set of Jewelers screwdriver's - A set of FINE needle nose pliers. - Either a small flashlight you can hold in your mouth or a headlamp. It needs to have a setting low enough that reflected light doesn't blind you. There's some rattle to the retaining ring where it is seated in a channel along the inside wall of the MBH. The is a split/cut in the retaining ring at one place in its circumference. If you hold it on it's side, the retaining ring will shift to one side and reveal a small gap between it and the inside wall/channel of the MBH. That's your "foot in the door." Taking one of the medium slotted screwdrivers and insert it in the gap near where the retaining ring is split. Slowly bend one end of the retaining ring in towards the center of the bit holder. Slowly work at it until the end of the retaining ring is far enough inward that you can grab it with the needle nose pliers. Once you have a firm grasp of the end, start twisting the MBH and the pliers in opposing directions so that the retaining ring starts to wind itself around the closed jaws of the pliers. Eventually, the enough of the retaining ring will be unseated from the interior channel of the MBH that it will come free. Depending on your technique, this will happen slowly or all at once sending the retaining ring flying. Make sure you are doing this in a room where you will be able to easily locate it if that happens, it's a small twisted piece of metal that shouldn't be ingested by kids of the human or furry variety. Once the retaining ring is removed, the only thing that holds the bit in the MBH is the magnet in the bottom of the MBH. 99% of the time, that's fine. On some rare occasions, if you get too aggressive with the impact driver or torque setting on the drill/driver, you might pull the drill/driver back and the bit will remain with the screw rather than the tool. For those cases, it doesn't hurt to have a Quick Change bit holder around or added to the kit (in the spine compartment). Something like the Milwaukee 48-32-4531 or the Bosch ITBHQC201 . Both are available on Amazon. Hope that helps. ATB, Sam
Question:	Country of Origin for the bits
Answer:	The box says "Made in Taiwan".
Question:	I’ve plugged the long ph2 to the mbh-1/4 and now it is stuck ! i've tried to use player etc. nothing works !!!!! please help
Answer:	You need to use a bench vise and a chisel and knock it out of there. Then the little retaining clip will break and the little bits won’t stay in quite as well, but their is a magnet. Then learn from this. The long bits don’t go in those extenders. They have that big grove for your impact so the clip really makes them stick. Also these bits are garbage so just throw them away and buy some Milwaukee bits.

Product description

Whether you are a weekend warrior or a professional contractor, the TEKTON 14-Piece Quick-Change Power Nut Driver Bit Set with Detents is a must-have addition to any tool box. Featuring a full range of sizes, this set is ready for use with any power driver or screwgun. Compact storage clip keeps bits handy has a wide belt clip to fit work belts. Constructed from forged and hardened chrome vanadium steel with a corrosion-resistant sandblasted finish, this set is heavy-duty, built to last.Set Includes:7-pc. 1/4 in. hex shank quick-change power inch nut driver bits: 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 in.7-pc. 1/4 in. hex shank quick-change power metric nut driver bits: 5, 5.5, 6, 7, 8, 10, 12 mmIncludes workbelt storage clip

• Forged and hardened chrome vanadium steel
• Corrosion-resistant sandblasted finish
• Universal 1/4 in. hex shanks fit quick-change chucks and any drill, driver, or screwgun
• Set Includes: 7-pc. Power Nut Driver Bits (Inch): 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 in., 7-pc. Power Nut Driver Bits (Metric): 5, 5.5, 6, 7, 8, 10, 12 mm
• Complete with Workbelt Storage Clip

User questions & answers

Question:	keeps the screw attached to the nut until beginning the screwing
Answer:	No, these do not have a magnet to hold the screw or nut. One trick that I use is to cut a piece of plastic wide enough to cover two flats of the screw or nut and long enough to hold with the screw or nut and insert this in the socket. Depending on the thickness of the plastic, I may only use it on one side of the screw or nut. Once the screw or nut is started I remove the plastic and then finish tightening.
Question:	I need a torx socket to fit a T10 torx screw
Answer:	Wendy E.The product you list (TEKTON 2938) is just a metric nut driver set. Torx bits (Internal) and Torx sockets (External) is possibly what you need. If you can't find them for a reasonable price on the internet, check with Harbor Freight.Ken
Question:	why doesn't it include a 9mm nut driver
Answer:	9mm in general isn't common, that being said, neither are the 5mm or 6mm.M3 is usually 5.5; M4 is 7, M5 is 8, M6 is 10, and M8 is 13 (euro) or 12 (japan).This really needs the 13mm. And 5.5mm is the same as 7/32". 11mm is sometimes used for fitting, so not really useful in a nut driver set.
Question:	what is the difference between TEKTON 2928 14-Piece Power Nut Driver Bit Set and TEKTON 2938 Quick-Change Power Nut Driver Bit Set with Detents
Answer:	The 2938 set has the detent on the shaft so it locks into the quick release chuck of a drill driver. The 2928 set does not have the detent, so it will slip out of the chuck of a drill driver. The 2928 set would have to be tightened in a regular drill chuck to hold it from slipping out.

Product features

TEKTON 2938 Quick-Change Power Nut Driver Bit Set with Detents, 14-Piece

Whether you are a weekend warrior or a professional contractor, the TEKTON 14-Piece Quick-Change Power Nut Driver Bit Set with Detents is a must-have addition to any tool box. Featuring a full range of sizes, this set is ready for use with any power driver or screwgun. Compact storage clip keeps bits handy has a wide belt clip to fit work belts. Constructed from forged and hardened chrome vanadium steel with a corrosion-resistant sandblasted finish, this set is heavy-duty, built to last.

Product description

Bit size: #2/#8 in. Bit type: Phillips/slotted. Shank diameter: 1/4 in. Bit length: 2 in. Number of pieces: 6 pc. Shank Type: hex.

From the Manufacturer

DEWALT double-end screwdriver bits are heat-treated to guarantee bit hardness that stands up to any job. This advanced hardening process results in a stronger, more durable bit that provides higher torque and increased driving power. Bits are double ended for jobsite versatility and have one No. 2 Phillips and one No. 8 Slotted tips. Bag of 6 tips.

• Shock-resistant tool steel for maximum durability
• Hardened core for extra strength and reduced breakage
• Double-ended for extra versatility

User questions & answers

Question:	Will these double ended screwdriver bits fit in a quick connect attachment
Answer:	I don’t think it will, there is no grooved for the quick disconnect balls to catch in it.
Question:	Are they magnetic
Answer:	These Bits are made of Tool Steel which means they are magnetic, but they are not 'Magnetized'. Usually the bit holder is 'Magnetized' and it is what holds the tool steel(iron) bit. ~ RHF
Question:	Will it fit in a dewalt sds rotary hammer drill and do i have to buy something to allow it to fit
Answer:	No, these bits would not be a direct fit for an SDS Rotary Hammer Drill.
Question:	How long is each bit? Thanks
Answer:	2 inches

Product description

The DEWALT DD5160 IMPACT READY 10pc IMPACT READY Titanium Drill Bit Set is designed for Metal or Wood. These bits are ground from solid 1-piece design and is up to 5 times more durable than the current 2-piece conventional product. The patented web taper increases the rigidity of the bit to decrease the potential for bit breakage and the patented pilot point tip allows users to drill holes faster than the conventional split point product and offers clean burr free holes with reduced bit walking. Common users include electricians, HVAC, mechanics, glaziers and GC's. These drill bits feature a 1/4" Hex shank. Set includes: 1/8", 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 5/16", 3/8" and a Tough Case. (Pilot Point on 3/16" and larger sizes).

• Ground from solid 1-piece design is up to 5 times more durable than the current 2-piece conventional product
• Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage
• Patented pilot point tip allows users to drill holes faster and offers clean burr free holes
• Common users include electricians, HVAC, mechanics, glaziers and GC's

User questions & answers

Question:	Will these bits fit into my dewalt dcf 887 impact driver? and, do i need some kind of connection device or will these go right into the driver? thanks
Answer:	Seating area is 17" by 45"
Question:	Does Dewalt make any other sets like this? I dont need titanium but i need the hex/impact fit. And a 1/2” bit would be nice
Answer:	legs are under the seat. that's were I found mine there is a zipper you unzip and there they are :)
Question:	These look like they are a hex shank.....is that correct
Answer:	Hello, the weight limit of this futon is 200 lb. Thanks!
Question:	The marketing has me confused, are these solid titanium? or are they titanium coated? amazon says: "ground from solid 1-piece
Answer:	Hello, Standing in front of the sofa, you pull it towards you and when you hear a click you will release. it will go all the way down to the bed position. You have to do this slowly, letting the mechanisms to latch and unlatch correctly. Hope this information is helpful. Thank you!