12 best submersible cutter pumps

Product description

The RIDGID Replacement Submersible Water Pump for RIDGID Tile Saws fits RIDGID tile saws R4007, R4010 and R4090 and most other brands of tile saws. The pump features a maximum output of 50 GPH.

• Replaces the water pump in a tile saw
• Designed for RIDGID tile saws R4007, R4010 and R4090
• Compatible with most brands of tile saws
• 50 GPH maximum output

User questions & answers

Question:	Can it pump air and water at the same time like a little bit of watter some air and more watter over and over again
Answer:	It pushes a constant flow of water.
Question:	i need a fitting for a 1/4” tubing
Answer:	I believe we are talking about a small water pump that I bought for my tile saw... The hose I use is clear and available at hardware store. any fitting you need for your use should also be available in plastic or brass at the hardware store.
Question:	What size tubing fits the pump nozzle
Answer:	Hi. The size of the tubing is 1/4".
Question:	will it work for R4030 model
Answer:	This is a basic tile saw water pump. Put it in the wet tray and connect the small water hose and plug the pump in and you are ready to cut tile....

Product description

The 120-volt pump has a capacity to pump 260 gallons per hour, providing the optimal amount of water for proper diamond blade lubrication, ponds, fountains & Waterfall. Pumps water from a submersed position in the tile saw water tray. The corrosion resistant plastic housing ensures a long, dependable pump life. The extra-large intake reservoir has an easy to remove and clean filter. The WP1000 Water Pump is easy to clean, No tools required to disassemble and clean filter/impeller. Facilitate your long-term use. Ultra-quiet operation, The reliable and durable motor does not produce much noise, giving you quiet environment. Quiet, energy-efficient magnetic drive pumps at a great price. Versatile, high performance pumps boast power and low energy use - Ideal for pond fountains and waterfalls. Use completely submerged only. Washable pre-filter included. Features: corrosion resistant plastic housing to ensure long, dependable pump life and continuously pumps water to diamond blade for optimum cutting performance | versatile pumps ideal for pond, fountain and waterfall use can also be used with most tile saw brands & other submersible applications | the small profile size makes the pump Easy to hide | magnetic drive pumps for versatile water garden applications | suction cup mounting feet for either vertical or horizontal mounting.

• Voltage: 110-120V - 60 Hz power: 15 watts
• Max. Flow rate: 260 gallons/hr (1000 L/h)
• Max. Lift Height: 65" | cord length: 5. 5' | approval: UL
• Plug type: 3 prong (with ground) NEMA 5-15P
• Dimensions: 2-1/2"(W) x 3-1/4"(H) x 3-3/4"(L)

Product description

Specification:

Voltage: 115V

Wattage: 36 watts

Cord Length: 6 Feet

170 GPH Epoxy Encapsulated Statuary Fountain Pump has 6' Power Cord. Small, submersible, epoxy-encapsulated pump for commercial, industrial, and home use. Applications include statuary fountains, water displays, air conditioners, machine tools, and many other applications where liquid must be transferred or recirculated. This compact 170-GPH pump features 1/4" MNPT discharge, 7' shut-off head capability, screened inlet, and 6' power cord. Pumps are not recommended for fuel oil transfer, aquariums, and swimming pools.

From the Manufacturer

Little Giant's multi-purpose pumps are extremely versatile and solve a variety of household needs. These portable pumps are designed to move water out of areas such as shallow flooded basements, tanks, and aquariums.

• WATER PUMP: This compact 170-GPH pump features 1/4" MNPT discharge, 7' shut-off head capability, screened inlet, and 6' power cord. Pumps are not recommended for fuel oil transfer, aquariums, and swimming pools
• IMPEDANCE PROTECTION: This pump is Impedance protected and it has maximum lift to 7-ft. Bottom inlet has snap off screen for easy cleaning. It has 1/4" MNPT outlet, with 90-Degree elbow accessory, and accepts 1/2" I.D. tubing
• SUBMERSIBLE PUMP: Small, submersible, epoxy-encapsulated pump is for commercial, industrial, and home use. Applications include statuary fountains, water displays, air conditioners, machine tools, and many other applications where liquid must be transferred or re-circulated
• EPOXU ENCAPSULATED PUMP: It is 1/125 hp epoxy encapsulated, and has direct drive motor. It is Nitrile shaft sealed and polyester housing. Snap off screen covers intake. It is cCSAus listed
• DIRECT DRIVE MOTOR PUMP DIMENSION: This small submersible pump is of opening size 6.5 x 6.5 x 4.5 inches. It is for submersible use only and designed for continuous duty
• UL listed
• 115V

User questions & answers

Question:	Is it safe to use the pe-1 to pump standard 50/50 antifreeze/coolant? (also waiting to hear back from franklin electric's customer support
Answer:	I use it for a wet saw pump. Very good pump. I don't think you would have a problem for use for antifreeze transfer at all.
Question:	Is the item correct for a 8 ft max head with 3/8 ID tube
Answer:	Box states: 1 ft. at 300 gpm; 3 ft. at 255 gpm; 5 ft. at 205 gpm; 12 ft. at 0 gpm. My pump shoots vertically a bit more than 1 ft. unrestricted which is the full 300 gpm.Outlet is 3/8" I.D. and 1/2" O.D. threaded.
Question:	I need a pump to push water 8 feet high, would this pump do the trick
Answer:	I know that it can push water to 6 feet at a fairly good rate. I usually have to dial it back to about 1/4 turn open to get proper flow for the fountain. I can open the valve all the way but that is too much flow. So at eight feet you may have relatively reasonable flow depending on what your application is. If it is a decorative fountain or pond it should be OK.
Question:	Does this pump work with the Dewalt D
Answer:	Yes, it is identical to the one that saw comes with. I bought this pump for precisely that saw. Works awesome, no complaints.

Product description

Simple Deluxe pumps are quality products, designed using the very latest technological developments. The pumps are suitable for use in hydroponic systems, ponds, aquariums, fountains & filter systems. The pumps have been developed on the basis of the so-called synchronous technology, whereby the electrical parts are fully encapsulated in epoxy resin. The pumps have an economical, powerful & reliable motor. The entire series are suitable for installation on dry land for in-line use or submersible into the water. Our submersible pumps are equipped with a ceramic shaft & therefore also suitable for use in salt water.

• #1 has pre-filter included - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, max flow rate: 1056 GPH, max lift height 12 feet
• Durable quality - Our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
• Safe & easy - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our electric cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
• 3 size threaded nozzles. 83 inch, 1.06 inch, 1.34 inch) – Please note inline and outlet nozzles has different thread size. The thicker ones are for Inline use and the thinner ones are for outlet
• Versatile - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems

User questions & answers

Question:	I was expecting a fitting to connect a hose to the pump inlet, but none was included. Where can I find one
Answer:	it is a submersible pump so long as the plug don't get wet
Question:	Does this pump have adjustable flow
Answer:	I use mine outdoor, submerged. The only thing I hear is thrush of water over my waterfall. And I have run it 24/7 for over a year with no problems. I bought a second one to drain my jacuzzi. Great product, & very dependable.
Question:	Bought the 1056 Gph model cannot find an adapter so that I can hook it up to flat filter box. 3/4”or 1” npt do not fit. what is the intake size
Answer:	Not sure quarter inch too small half inch too big. Ended up using half inch tube with half inch hose clamp works great.
Question:	Why are people saying it cannot be used as an inline pump? according to pics,remove control knob,connect fitting & place pump out of water
Answer:	If your not concerned about how long it takes, I used it to pump out a much smaller volume and had to switch to a different pump. I used a Master submersible utility pump, model 540094-01, 1/4 HP, also available on Amazon, but about 4x more expensive. The FREESEA was taking forever. The Master pump has a garden hose size output.

Product features

Garden Fountain

Hydroponics System

Aquarium

Simple Deluxe 1056GPH Pump LGPUMP1056G includes removable front cover, impeller, rubber mounting feet, and 15 ft waterproof power cord

• Voltage: 120V/60Hz
• Amps: 2.30A
• Watts: 276W
• Flow Rate(G/H): 1056GPH
• Max Lift Height: 12 ft
• Dimensions(Inch): 8.3 x 4.64 x 7.08
• Cord Length: 15 ft

Product description

The Jebao pp300lv is a fully submersible small pump that is perfect for fountains, small ponds, pet water bowls or aquariums. 40 gph with flow control dial, 6 foot cord and includes 5/16" connector.

• Dimension:1.5"x1.4"x1.0"
• 6 foot cord, 120v 60hz
• Quality pond pumps at a great budget-friendly price
• Multipurpose pond pumps boast cool, quiet, & efficient operation

User questions & answers

Question:	Does existing stem come out so my fountain stem with a 1/2 inch OD will fit in
Answer:	On my son (almost 3, wears a size 8) they go about 3 inches above his ankle. He is on the shorter size but they work fine with his boots on. If you are asking if these socks will fall down or slip down (like some ankle socks do) then no I don't think you have to worry about that.
Question:	What's diameter of water output chimney on top? If bigger than 1/4 inch, does it come w/ 1/4-inch adapter? Thanks
Answer:	Yes, only for boys. I put some on my little girl and her foot fell off :( but they're fine for my son. Seriously though, what kind of question is this? People can wear whatever they want, regardless of gender identity.
Question:	Is this the same as the pp-300? 60hz 2w, ac 120v
Answer:	Sorry I am unable to answer the question as they were a gift.
Question:	Does this pump work with Pioneer Pet 6022 ceramic raindrop design
Answer:	Depends on your child's foot size. most 2 year olds are probably in the 6-8 toddler range

Product description

The BURCAM 400701P submersible sewage grinder pump is designed for residential sewage applications to eliminate solids. The robust cast iron body provides strength and longevity. The oil-cooled, 1 HP, 115V, 60 Hz motor includes automatic thermal and overload protection. The tethered float switch ensures automatic operation of the pump. The pump includes new grinding technology to eliminate solids and a vortex impeller propels them out of the pump. This pump can be used in a new installation or to replace an existing sewage pump. A separate 20-Amp breaker is required to operate this pump. The maximum head is 50 feet and the capacity is up to 2535 US GPH.La bomba de amoladora sumergible BURCAM 400701P está diseñada para aplicaciones residenciales de aguas residuales para eliminar sólidos. El robusto cuerpo de hierro fundido proporciona resistencia y longevidad. El motor refrigerado por aceite, 1 HP, 115V, 60 Hz incluye protección termica automática y contra sobrecarga. El interruptor de flotador atado garantiza el funcionamiento automático de la bomba. La bomba incluye nueva tecnología de molienda para eliminar sólidos y un impulsor de vórtice los impulsa fuera de la bomba. Esta bomba se puede utilizar en una nueva instalación o para reemplazar una bomba de aguas residuales existente. Se requiere un interruptor de 20 amperios separado para operar esta bomba. La cabeza máxima es de 50 pies y la capacidad es de hasta 2535 US GPH.BURCAM 400701P 수중 하수 그라인더 펌프는 고형물을 제거하기 위해 주거용 하수 응용 분야에 맞게 설계되었습니다. 견고한 주철 몸체는 강도와 수명을 제공합니다. 오일 쿨, 1HP, 115V, 60Hz 모터는 자동 열 및 과부하 보호 기능을 포함합니다. 테더 플로트 스위치는 펌프의 자동 작동을 보장합니다. 펌프에는 고체를 제거하기 위한 새로운 연삭 기술이 포함되어 있으며 소용돌이 임펠러가 펌프에서 배출합니다. 이 펌프는 새로운 설치에 사용하거나 기존 하수 펌프를 교체하는 데 사용할 수 있습니다. 이 펌프를 작동하려면 별도의 20A 차단기가 필요합니다. 최대 헤드는 15.2 m (50 피트)이며 용량은 최대 2535 미국 GPH입니다.

• NEW Powerful grinding technology reduces clogging and jamming
• High lift capacity up to 50 feet
• tethered float switch ensures automatic operation of the pump
• The robust cast iron body provides strength and longetivity
• Hardened stainless steel cutter
• Revolutionary cutting technology
• Requires a 20 AMP breaker circuit

Product description

Designed for residential sewage applications. Higher flow rates allow use with 2" discharge lines. PRG-Series residential grinders can be used as a replacement pump in 2" discharge systems using LE40 and LE50-series solids-handling pumps. NOTE: PRG-Series flow rates do not exactly match LE-series flow rates. Consult factory with actual application and head specifications prior to replacing LE40 and LE50 series pumps (Min flow rate: 42 GPM at 5ft head - see Mfg specifications for full curve).

From the Manufacturer

Designed for residential sewage applications. Higher flow rates allow use with 2" discharge lines. PRG-Series residential grinders can be used as a replacement pump in 2” discharge systems using LE40 and LE50-series solids-handling pumps. NOTE: PRG-Series flow rates do not exactly match LE-series flow rates. Consult factory with actual application and head specifications prior to replacing LE40 and LE50 series pumps (Min flow rate: 42 GPM at 5ft head - see Mfg specifications for full curve).

• Heavy cast iron construction
• 115V single phase
• Patented V-Slice cutter technology
• Shreds difficult solids such as feminine products, rags, towels and wipes
• Includes: Automatic switch, 10' power cord

User questions & answers

Question:	Can this be reduce to a 1 1/2 inch discharge line
Answer:	I would assume it means it is packed well so that the product arrives at your address in good condition and you would not be having any frustration with having to contact Amazon about it. My experience has been that products I have ordered have always arrived in good condition and have never caused me any frustration and, hopefully, that will be your experience also!
Question:	Will this pump be too powerful to replace a 1/2hp sewage ejector pump
Answer:	There is no one location..but all maple tree farms who supply Coombs must meet quality specifications.
Question:	How long has your pump lasted
Answer:	I believe it is heated from the tree as Maple syrup is made by boiling between 20 and 50 litres (5.3 and 13.2 US gal) of sap (depending on its concentration) over an open fire until 1 litre (0.26 US gal) of syrup is obtained, usually at a temperature 4.1 °C (7.4 °F) over the boiling point of water (Wikipedia).
Question:	What's the best way to contact the manufacturer for warranty service? No pnone # listed on the warranty sheet provided
Answer:	It is 100% maple syrup, taken from a sugar maple tree and probably boiled in a large pot to thicken it, but no gluten product is added. I doubt this process is done in an atmosphere where gluten would be floating around. My husband is very allergic to gluten and has never had a problem with maple syrup. Hope this helps.

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91025, 1/5 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1560 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/5 HP Utility pump moves up to 1,560 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10' cord length
• Large 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
• Removable suction screen and handles up to 1/8 inch solids
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	What's the PSI or max head (pumping vertical height) of this pump
Answer:	Length of hose for a sump pump is not nearly as important as lift. you can have a long horizontal run with only minor flow loss. Friction loss (the loss from hose length) at these low pressures is very small. The elevation (aka lift) is the true limiting factor. (PSI means pounds per square inch, FYI, the water pressure coming into your house from the main is about 50-80psi, someone wondered what psi meant). Based on the chart, this pump moves about 30 gallons per minute (gpm). If you lift ten feet the flow drops to about 20 gpm; at 20 feet of lift it's flowing about 10 gpm. I have used this with vinegar to flush my tankless water heater and I used it with about 50/50 mix of simple green and water in a 5 gallon bucket as a parts washer for motorcycle parts and the pump is fine. I do flush it with clean water when I am done.
Question:	Does it have an automatic shut off
Answer:	The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process.
Question:	Will clothes washer hoses fit on this pump
Answer:	The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-)
Question:	Can this be user to flush a tankless heater with vinigar
Answer:	I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know.

Product features

Superior Pump 91025 1/5 HP Thermoplastic Utility Pump

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91025, 1/5 HP thermoplastic submersible utility pump will move water up to 1560 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/4 in. NPT discharge.
• 3/4 in. Garden hose adapter.

Multiple discharge hookup options

• Easily hook up to a Garden Hose* or Discharge hose* (*not included)
• Easy to transport using the carrying handle.
• 10 ft. power cord.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/5 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 1560 Gallons per hour at 0'
• 840 Gallons per hour at 10'
• 420 Gallons per hour at 20'

Product description

Pond aeration pumps oxygenates garden ponds for healthier fish. Aids the decomposition of fish waste. Helps prevent total icing over in the winter. Provides high volume of air flow with quiet operation. Energy efficient and easy to use. Includes air diffuser and 6-feet cord. 9150 cubic inch/minute; requires 3/4-inch inside diameter tubing (not included), 100-watts.

• Pond Aeration Pumps Oxygenates Garden Ponds For Healthier Fish; Aids The Decomposition Of Fish Waste; Helps Prevent Total Icing Over In The Winter; Provides High Volume Of Air Flow With Quiet Operation; Energy Efficient And Easy To Use; Includes Air Diffuser And 6-Feet Cord; 9150 Cubic Inch/Minute; Requires 3/4-Inch Inside Diameter Tubing (Not Included), 100-Watts
• High Volume With Steady Air Flow
• Country Of Origin: China
• Brand Name: DANNER MANUFACTURING

User questions & answers

Question:	What is the Watts this air pump uses
Answer:	I purchased the 32W pump and the output thread size is M8-1.0 (as opposed to M8-1.25 which is more standard). It is certainly not NPT threading. The adapter included is a M8-1.0 to 8mm or 5/16" hose barb and the manifold is 8mm hose barb input to six 5mm hose barbs.
Question:	How many watts is this unit
Answer:	I have 2 pumps, the 793 & 950. The 793 was plunged in on March 25th, 2017 and runs 24/7 and is still running. The 950 was July of this year and still is running.
Question:	The title for this pump says 8900 cfm but the description says only 3600 cfm. Which one is correct
Answer:	Pump 3/8” ID manifold 3/16” ID
Question:	What is included in the box for this air pump
Answer:	This pump supplies plenty air for my 150 gallon out door hydroponic garden. The noise varies according to the mounting of the unit, I have it mounted suspended with elastic's Bands and it is still noise, I wouldn't use this for the living room.

Product features

A history of excellence

Ever since our modest beginnings, Danner Manufacturing, a family owned and operated business, has developed and produced innovative products for hobbyists and professionals alike. Eugene Danner Sr. started planting the seeds for Danner Manufacturing in 1934 while working in the cellar of his home in Brooklyn, New York. While holding a full-time job as a factory manager, Eugene found great pride creating the Danner business on his time off from his regular full-time job duties.

Improving the Art of Fluid Motion for Over 80 Years

The brands which we manufacture and market are: Supreme Aquarium, Pondmaster, ProLine, Supreme Hydro, Pool-Care and Pondmaster ECO. These brands can be found in the Aquarium, Water Gardening, Pond, Pool & Spa, OEM and Hydroponic industries throughout North America and the offshore markets. We are committed to providing our customers with high quality and reasonably priced products, creating the best value.

Product description

The QEP model 60098 Submersible Tile Saw Water Pump is the original equipment quality pump for QEP and other wet tile saws. The 120 volt pump has a capacity to pump 60 gallons per hour, providing the optimal amount of water for proper diamond blade lubrication. The corrosion resistant plastic housing ensures a long, dependable pump life. The extra large intake reservoir has an easy to remove and clean filter. This pumps fits QEP wet tile saw models 83200, 83240, and 83230.

• 120 volt pump motor has 60 gallon per hour pumping capacity
• Pumps from a submersed position in the tile saw water tray
• Corrosion resistant plastic housing to ensure long, dependable pump life
• Continuously pumps water to diamond blade for optimum cutting performance

User questions & answers

Question:	What is the size if the tubing that goes with this pump
Answer:	yes they do true to size
Question:	will it work on 600010 saw
Answer:	I bought these for my great-grandson for Christmas. Therefore, it would be difficult for me to give you a valid answer. His mommy said they are good quality.

Product description

These wet rotor pumps can be positioned vertically or horizontally and can be used submerged or outside the pond below the water surface. It features an oil-free design for maximum safety for all pond life, rope/cable loop for deep water retrieval, and pre-filter included.

• 40 Foot cord - 5.5 Amps - 660 watts - 28ft Max Height / Shut off - Approx. dimensions: 8.00" H x 13.25" L x 6.10" W
• Quiet operation - Operates submersed or inline (below water level)
• Can be positioned vertically or horizontally
• Oil-free design for maximum safety for all pond life
• 2" MNPT Inlet and Outlet & SPG accepts 2" FPT

User questions & answers

Question:	What adapter and/or fitting is required to attach pvc flex tubing to the mnpt outlet
Answer:	They are as stretchy as most pants made like these for babies. Easy to pull up and down and fit well over the bodysuit.
Question:	Can I add a bottom draw adapter to this pump? if so, what size diameter
Answer:	They are on the thicker side but not too thick for summer....
Question:	what is the size
Answer:	We end up purchasing chubbiee no-iron clothing labels right here on amazon. They just work perfectly!
Question:	made in
Answer:	ALL of Simple Joys by Carter are great item........durable and prices are very good. I have never had a problem :) :) :) LOVE

Product description

KEDSUM submersible pump is perfect for nano to medium sized aquariums, small ponds, water gardens, and desktop water fountains. The percolator of the water outlet protects the rotors from blocked by rubbish, ensures that the rotor van work smoothly and efficiently. The small profile size makes the pump easy to hide or disguise. Has adjustable flow and is easy to clean. This aquarium pump is great for aquarium, fountains, spout and hydroponic systems.

• 🐋【Specifications】Dimensions: 4.7*4*4inch. The 6.6ft UL certification power cord with grounded three-pronged plug offers convenient installation and keep safe. Max Flow Rate: 800 GPH(3000L/H), Max Lift Height: up to 10 Feet. (Power: 60W, Voltage: 110V)
• 🐋【Ultra Quiet Design】The reliable and durable motor does not produce much noise, giving you quiet environment.
• 🐋【Perfect Size】The perfect size makes the pump easy to hide or disguise in the water. Suction cups is great for mounting onto the glass surface. This aquarium pump is designed for medium to large size aquarium, fountains, water gardens, hydroponic and pond.
• 🐋【Detachable and Cleanable】No need tools to detach it, easy to seperate, easy to clean. Any question of your KEDSUM 800GPH submersible water pump, please come back to us and we will be responsible for the pumps we produce.