12 best thermostat for reptile tank

• ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
• ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
• ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
• ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
• ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

User questions & answers

Question:	Is there an instructional video on how to put the temperature controller and heating pad together? Or an instructions pamphlet
Answer:	Hello, you can plug the heating pad to this controller and set the desire temperature, place the sensor to where you want the temperature to be controlled(for example, into the soil) then it should start working. You can find the manual of this controller here: https://centurytimer.com/product_resources/BNQ-T7BH/Instruction-Manuals-for-Web-BNQ-T7BH.pdf
Question:	Can a heat lamp be plugged into it and control the heat like if it was a mat
Answer:	Is this accurate with a heat lamp?
Question:	Is it normal for this to make an audible clicking noise when it turns on? Just got mine set up and it clicks when it turns on
Answer:	Is there anyway to disable that clicking sound? I just got mine today and its right next to my bed so its really irritating clicking on and off every 5 minutes.
Question:	can this be used for 2 che lamps
Answer:	With the wattage and amperage it says it can supply it should easily be able to handle 2 lamps. Just run a strip off the plug and only have them 2 lamps controlled by the thermostat. AGAIN, as long as it will handle what they say it can handle. A 100watt bulb should only pull just under 1 amp.

Product features

BN-LINK Digital Heat Mat Thermostat Controller

BN-LINK Digital Thermostat Controller is your perfect solution to providing constant optimum temperature for a variety of uses. Our thermostat controller has an easy plug-in operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug.

Effortless Set-Up

A manual is included with our thermostat controller. But with the simple interface, it won't be needed! Please follow these instructions:

1. Plug in the thermostat controller
2. Press and hold the "Set" button to enter the temperature setting
3. Press the UP/DOWN button to adjust the target temperature
4. Press the "Set" button again to complete the process

**Please note that there is a 2-3 degree buffering zone for the thermostat controller to turn your appliance on again**

Switch Between Temperature Units

To toggle between Fahrenheit or Celcius:

• Press and hold the DOWN button for 3 seconds for Celcius
• Press and hold the UP button for 3 seconds for Fahrenheit

Simply Plug Your Appliance In

Our BN-LINK heating thermostat controller has a simple design for the convenience of our customers. Plug in your appliance and watch our thermostat controller maintain the optimal temperature you've set for your needs.

Keep Your Pets Warm

Maintain perfect temperature control in reptile terrariums and small pet enclosures. Place the temperature probe where the heat source will target and watch your pets stay warm and happy.

Great for Seedling and Plant Germination Projects

Grow with BN-LINK. Our thermostat controller is ideal for maintain rooting temperatures in a tray and dome.

Variety of Uses

Help give your aquatic life a comfortable environment with the help of our thermostat controller.

Easy to Mount

With the mounting holes on the back of the thermostat controller, it allows you to customize your area. Mount anywhere you need the thermostat controller to be.

Product description

1. How Pymeter control temperature?

Temperature controller is actual Heating/Cooling controller, thus MUST SET ON-Temp to turn ON Heating/Cooling, and MUST SET OFF-Temp to turn OFF Heating/Cooling.

Heating starts at LOW Temp [ON-Temp(1oN, 2oN)], stops at HIGH Temp [OFF-Temp(1oF, 2oF)], thus for heating MUST SET 1oN(2oN) LESS than 1oF(2oF);

In heating mode, 1oN(2oN) is the minimum temp you allow, 1oF(2oF) is the maximum temp you allow.

Cooling starts at HIGH Temp [ON-Temp(1oN, 2oN)], stops at LOW Temp [OFF-Temp(1oF, 2oF)], thus for cooling MUST SET 1oN(2oN) GREATER than 1oF(2oF).

In cooling mode, 1oN(2oN) is the maximum temp you allow, 1oF(2oF) is the minimum temp you allow.

2. Reading temp is inaccurate?

Every Pymeter controller is calibrated before come out of factory, it is reading temp accurately!

Please don't compare it to common inaccurate thermostat、thermometer or temp gun. If you doubt Pymeter controller accuracy, please calibrate with ice-water mixture (it is 32F when ice is melting), and you will see which device is accurate then.

3. Beeper keeps sounding?

Probably it is the Alarm settings ( AL、AH、d7 ) you set are NOT the right temperature you want. AL is low temperature alarm(it sounds when current temp is AL or Lower), AH is high temperature alarm(it sounds when current temp is AH or Higher), d7 is difference alarm(it sounds when the temp deviation between sensor 1 and sensor 2 is over d7). If you don't need alarm function, please don't change the values of AL、AH、d7, the default values usually won't trigger alarm. You can factory reset by switching temp unit from F to C in setting.

Please download User Manual PDF in Product information.

• ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
• ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
• ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
• ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
• ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.

User questions & answers

Question:	The max temp is 210 Fahrenheit correct
Answer:	Yes, correct.
Question:	How do I change the probes from cool to heating in settings? What buttons do I press in what order
Answer:	Cooling and heating are relevant to the "turn on at 'x' temp" and "turn off at 'x' temp" if it is not working in your preference currently, try switching some measurements in opposites of each other.
Question:	How do we get a "Free New Replacement" as mentioned below
Answer:	Please contact support on www-pymeter .com or send message to us on Amazon directly.
Question:	Can you send me a copy of the instructions? Mine didn’t come with any
Answer:	Sorry for that. Please read/download the instruction via this link: https://www.pymeter.com/PY-20TT-User-Manual.pdf, any further question, just message us on Amazon directly :)

Product features

Pymeter Heating and Cooling Temperature Controller

Pymeter Digital Temperature Controller is easy to use, safe & reliable dual outlets thermostat. It is used as over temperature protection or automatic temperature control system with various electric appliances such as heaters for Reptile, Aquarium, Greenhouse, Home Brew, Fermentation, Accelerating Germination, Plant Grow Tent, Pet Breeding, Incubation, BBQ, Terrestrial Heat Control, Aquarium Cooling Fan, Electric Radiator, Electric Oven, etc.

Advantage compare to other Thermostat:

Parameters

Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F

Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F

Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A

Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault

Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.

Widely Applied

Product description

A temperature control system designed to be used with a wide variety of other Zoo Med terrarium heaters and cooling fans. The terrarium thermostat features a large LCD and is accurate to one degree Fahrenheit.

• Temperature control range: 50F to 122F. Controls Temperature by turning on heating devices in HEAT mode or by turning on cooling devices (e.g. fan) in COOL mode.
• Remote Temperature Sensor with 6 foot cable.
• Controls up to 600 watts of heating devices. Controls up to 150 watts of cooling devices.
• Built in memory stores settings in case of power failure.
• Alarm flashes and sounds when temperature reaches extreme high or low levels.

User questions & answers

Question:	Can I plug this into an extension cord? The cord is not long enough for where the terrarium is located
Answer:	Yes use a grounded extension
Question:	How long is the the temp probe
Answer:	It’s 6ft long
Question:	This is for 120 volts, right
Answer:	110 120 v common house hold plug
Question:	Does this device have a fail safe? Will it shut everything off if something happens like a malfunction
Answer:	No it will not but you can program a alarm if the temp either gets to hot or cold than your desired temp.

• TWO PACKAGE OF THERMOSTAT DELIVERY RANDOMLY- Packed with digital thermostat and under tank heater. Reptile under tank heat pad provides your reptile gentle and constant warm 24 hours, and monitors and control the temperature all the time.
• UPGRADED VERSION - Upgraded adhesive material of under tank heat pad is more solid than similar products in the market. It effectively decreases and eradicates the probability of melting and separating.
• MOUNTING - Reptile heat mat with thermostat optional mounting on bottom or side of your terrarium. Rubber feet enclosed for bottom mounting to slight elevate terrarium and allow excess heat to escape. (IMPORTANT)
• SIMPLY SET UP - Heat mat thermostat simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display of seedling heat mat thermostat available in Fahrenheit and Celsius.
• SPECIFICATIONS - Hermit Crab Heater Size: 8” x 12” ; Voltage: 120 volt; Power: 16 watt; Temperature control range is 68-108°F, Digital Reptile Thermostat temperature display range is 32 -140°F.

User questions & answers

Question:	I've had mine for almost a month and it was working fine but now doesn't heat up at all. The work light is on but it never heats up. What can I do
Answer:	Is it plugged in properly? Is the thermostat hooked up and set to the right temps?
Question:	has anyone who actually knows how to use heat pads had any problems? I need one for some belly heat for my ball python during winter months
Answer:	I use this for two Ball Pythons and so leopard gecko and it works well ( make sure you get the appropriate size for your reptiles- my leopard gecko uses a smaller Matt than the snakes) but the thermostat isp really great for monitoring and maintaining temperature one the mat.
Question:	Why isn’t my pad heating up fast
Answer:	I bought the same pad and plugs it in set it to 80 degrees and it wouldn't heat up past 70 I even left it overnight but it didn't work
Question:	Can you apply this to a plastic bin
Answer:	With the included thermostat it would be fine for plastic containers. I use it on my sterilite container with no issues.

Product features

Uniform Heating

24-hour primary or secondary heat source for tropical or temperate reptilian species

Upgraded Adhesive

All Heating Pads are upgraded, we changed the adhesive material to a new one that is more solid

Easily Installation

AIICIOO Under Tank Heater permanently adhere to your terrarium or incubator, forming a solid bond for optimum heat transfer

Grounded Outlet

Temperature control range: 68-108°F

Temperature display range: 32 -140°F

The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.

Fahrenheit or Celsius readout

Fahrenheit - Press and hold the 'Up' button for 3 seconds to display in Fahrenheit.

Celsius - Press and hold the 'Down' button for 3 seconds to display in Celsius.

Easy to Set Up

Press the UP or DOWN button to adjust the temperature

The thermostat’s LED screen shows the numbers as you cycle through them. Press the SET button again to set the chosen temperature.

• PROFESSIONAL RELIABILITY AND RESULTS: Regulates and maintains your preferred temperature within a control range of 40–108 ºF（ Temperature display range is 32 -210°F）; perfect for professional horticulturalists or the budding grower. Comes with a sensor probe so you can reliably track the temperature of your plant’s roots
• HIGH-QUALITY CONSTRUCTION: With an easy-to-grip hexagonal shape and made of an extra-fortified plastic, components will not rust or malfunction under tough conditions
• ZERO-EFFORT SET UP & OPERATION: The controller comes with a manual but you won’t need to read it! Using just 3 buttons, you can set a temperature or change the display between Fahrenheit/Celsius in seconds
• USE, HANG, FORGET: Our controller comes with a hanging tab and wall mount along with a convenient angled socket to keep cords untangled and neat. Guaranteed to keep your growing operation perfectly balanced, as all things should be
• COMPATABILITY & SAFETY GUARANTEED: Compatible with any heat mat and ready to plug in to North American outlets. VIVOSUN always stands behind its products and cares for you—if you have any questions or concerns contact our friendly customer service staff

User questions & answers

Question:	Is the probe ok with saltwater
Answer:	Instructions state "do not immerse temp probe in liquid" so no .
Question:	how to switch from °F to °C
Answer:	Hold down on the up and down buttons at the same time
Question:	Is this a thermostat with a mat or does it work with any other mat
Answer:	It is just a thermostat. It works with anything heat outputting, like a heating lamp. The probe senses the temperature and turns the power on or off to whatever you plug into it.
Question:	how many mats can be connected to this
Answer:	There is only one outlet on the thermostat. However, being that the thermostat is rated for 1000 watts, you can connect a power strip and connect multiple heating mats provided you do not exceed the units power rating. Just to be safe, I wouldn't plug in more than half the rated power (i.e. 500 watts). But for those 17 watt heating mats, that's a lot of mats!

Product features

Digital Seedling Heat Mat Thermostat Controller

• The easy-to-grip hexagon controller is made of extra-fortified plastic and high-quality components that won’t malfunction under tough conditions.
• Clear, minimalist display, detailed finishing, smooth edges, and tactile buttons demonstrate the controller’s superior craftsmanship.
• Compatible with standard North American outlets and plugs: the secure-fit 3-prong grounded socket grips plugs tightly.
• Electrical specs: 120 Volts/60 HZ/8.3 max Amps/max Wattage 1,000 W.

Hanging Tab

Hang the controller however you want from the eyelet tab. It can hang flush with the wall or from a variety of hook sizes.

Power Cord and Sensor

Enjoy more installation flexibility with a 5.8FT power cord and 6.4FT probe cord. It is ideal for where you have it located (no where near a plug).

3 Prong Outlet

The angle of the outlet keeps cords from getting tangled. This UL certified 3 prong grouded outlet support a 1000Watt load.

Suction Cup

The adjustable suction cup lets you easily stick the thermostat probe to a wall or terrarium.

Germination Kit

Combined with VIVOSUN thermostat, put the probe into the seed trays. It helped facilitate a 100% germination rate and you will find all your seeds germinated faster then before.

Reptile Warmer

Can be used with VIVOSUN heat mat to make an warm and comfortable growth environment for your reptile even in cold winter.

Fermentation Helper

It is perfect for your set up to keep wine or kombuchat at a perfect temperature. With VIVOSUN thermostat controller,you don't have to make sure its overheating.

• 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
• 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
• 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
• 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
• 👏👏【Sensor Length 】2m / 6.56ft

User questions & answers

Question:	Does this only do heat? Is there a model that is soley for cooling
Answer:	Yes. It is only do heat and the time. We have one for cooling. It is ITC-308.http://www.amazon.com/Inkbird-Itc-308-Temperature-Controller-Thermostat/dp/B011296704/ref=pd_sim_sbs_328_1?ie=UTF8&refRID=00PW2766SPNECBNVYWR0&dpID=417y0W4HFmL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_
Question:	Does this product measure the humidity as well as the temperature
Answer:	Sorry, this ITC-306T cannot measure the humidity. However, we have a combination product that can control temperature and humidity. Pls see the link (https://www.amazon.com/dp/B01N56KEU6). Thanks!
Question:	Do I have to reset it every 24 hours? Or onceset is it good to go
Answer:	Once set, it stays set, even after power outages (of which I've had several since getting mine.)
Question:	Basically I am trying to keep the temperature between 80 and 85 degrees, this includes a heater and fan. How do I set this
Answer:	I initially found the flyer a little difficult to understand, but basically you have to set 2 variables, the target temperature and the temperature differential. So you would set the target temperature to 85 and the differential to 5 degrees. Thus if current tmp >= target - differential it shuts off. If current_tmp

Product features

Specification

• Temperature Control Range：-50~99 ℃，-58 ~ 210 °F
• Temperature Resolution：0.1°F
• Temperature Accuracy：± 2 °F (-58 ~ 160 °F)
• Temperature Control Mode：On/Off Control, Heating
• Input Power：100 ~ 240VAC, 50Hz/60Hz
• Temperature Control Output：Max. 10A, 100V ~240V AC

Packing list

• ITC-306T Temperature Controller*1
• Instructions*1

Product description

Reptiles rely on external heat sources to elevate their body temperature. Zilla Heat Mat Terrarium Heaters provide warmth for reptiles to absorb from their surrounding environment in order to maintain and thermo-regulate heat used for daily activities, appetite and digestion. Carbon fiber heating technology efficiently radiates infrared waves creating uniform heating with no hot spots. Carbon fiber is an energy-efficient method for heating with no wires that might become pinched or broken. Each unit has adhesive backing and is low voltage with a maximum temperature of 113F. The material properties restrict it from getting warmer and remove the need for a thermal switch, which often fail.

• Ideal heat source for desert and tropical reptiles
• Carbon fiber radiates uniform heating without hot spots and is energy-efficient without wires that can pinch or break
• Easy-to-use adhesive mounting either underneath or on the side of the terrarium
• Helps reptiles regulate body temperature needed for overall health
• Always provide temperature gradients for reptiles where they can warm up and cool down

User questions & answers

Question:	i have a wooden box for my snake but the front is all with glass..will it work to be placed in the front of the terrarium where the glass is
Answer:	I don’t think so. I believe the instructions say to lay flat to dry but I could be wrong. I always lay them flat to dry. They dry pretty fast.
Question:	can i use this on the outside of my betta fish tank? the heaters the submerge freak me out
Answer:	Good afternoon Adam, It is two 18" x 48" pieces. Thank you for your interest in our products! Kind regards, Lynn and Thomas, Carolina Custom Cages
Question:	Would this work for my emperor scorpion
Answer:	Good evening Fritz, We doubt that would be a problem, it certainly isn't a problem for dragon claws. Thank you for your interest in our products! Kind regards, Lynn and Thomas, Carolina Custom Cages
Question:	Will this work for my corn snake
Answer:	It might fit lizard, snake, bearded dragon and other reptiles.You can try it for sea turtles.

• Wifi & Free APP 🐠: Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the APP, the app will push notifications to remind you.(APP: ☞InkbirdSmart)
• Dual Protection 🐠: The wifi temperature controller is equipped with 2 relays(current relay) to ensure that the power can be turned off under any abnormal circumstances, will protect your fish from being hurt by overheated water
• Continous Heating Alarm 🐠The heating time can be set according to your needs from 1 hour to 72 hours. The controller will alarm once the water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0℃~35.0℃/68.0℉~95.0℉ and the measure temperature range is -40℃~100℃/-40℉~212℉.
• Easy to use 🐠: Plug and Play. The 10A 1200w programmable and prewired aquarium thermostat is compatible with most kinds of heaters, no need to assemble the product yourself, just plug and play.
• Dual probe for safety 🐠:The aquarium heater controller will alarm once the temperature difference between 2 probes is more than 5℉(3℃), and the app will push a notification at the same time.To protect your fish in a more safet environment

• ✓ DUAL OUTLET, DUAL FUNCTIONALITY: Our controller is capable of controlling a heating and cooling device simultaneously
• ✓ SET AND GO: Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
• ✓ PROFESSIONAL GRADE: High-accuracy waterproof temperature probe with working temperature from -58 to 230°F; Controller with working temperature from -40 to 176°F
• ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range. Also features a 71 inch power cord and 71 inch probe cord for flexibility.
• ✓ SAFE & RELIABLE: Our thermostat controller comes with overload protection and is ETL listed. Rated Voltage is 120VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5

User questions & answers

Question:	Can this be used to regulate the temp of a commercial 100 cup coffee maker
Answer:	I've been running my deep freeze as a Keezer for well over a year now, utilizing this method with zero issues. It worked so well that I use a second one on an old fridge to be able to do temperature controlled fermentation. The cooling of the fridge and a homemade low power space heater keeps my fermentation within +/- 1 degree. Perfect for quality brews.
Question:	How do you change to decimal number
Answer:	You can not plug another heat source in the cold socket. When the set temp for heat is reached (plus the degrees of override you set) the cold plug is activated. Until then the cold plug it is dead (Off). You can use a multi outlet splitter for the heat plug side making sure their power requirements do not overload the units 10 amp capacity. You will not have any control of a second volume being heated. The one probe will just turn the heat outlet on and off and everything plugged in to it. It is either or, not both, allowing ten amps to be plugged into each as they will never be on simultaneously.
Question:	Could this be set to turn off a device at 160 F and not turn back on until it got down to 40 F
Answer:	Depending on how many bends & how small the gap is. Probe wire is about 1/8" and flexible, sharp corners not recommended. Does cooler have another way to insert probe inside? Probe is 3/16 in diameter. Flat door seal should work fine.
Question:	What is the warranty on the temperature controllers? wire guage size on cabling? probe cable length? connector type & diameter
Answer:	It is waterproof enough for my freshwater aquarium use, but metal probe does not last 2 years. Mine failed and is off by 4-6 degrees on average but could be off by more than 10 deg. at times which has killed my fishes. I was advised to buy a "thermal well" to protect the metal probe from premature failures. The replacement probes are 30% the cost of the whole unit and be ready to replace it an average of 1 to 1.5 years but as early as 5 months. I have a total of 6 units different models but same probes and 3 failures so far. Hope that helps.

Product features

BN-LINK Digital Heating and Cooling Professional Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding -40-176°F 15A/1875W

BN-LINK Digital Heating and Cooling Professional Thermostat Controller is your perfect solution to providing constant optimum temperature for variety of uses. Easy Plug-In Operation with LED Illuminated Indicator Lights & Dual-Operation Three-Prong Ground Plugs.

Dual Operating Plugs

Waterproof & Accurate Probe

Durable Grounded Plug

Great for Cooling Devices

Duality of the thermostat controller allows you to seamlessly control your cooling devices. Great for fans, cooling pads, and other cooling units. Just set your SV (set value) and your Cd (Cooling Differential Value).

Amazing for Heating Devices

Duality of the thermostat controller allows you to seamlessly control your heating devices. Great for heat pads, heating lamps, and other heating units. Just set your SV (set value) and your Hd (Heating Differential Value).

Professional and Versatile

Plug your heating and cooling devices to maintain a consistent temperature range. Connect your heating device and cooling devices to ensure that your pets, plants, brews (and much more) will thrive in an optimal environment.

Durable and Heavy Duty

Our thermostat controller is durable and long lasting. Built in with a function to allow you to set an alarm when the surroundings are getting too hot or too cold. Our thermostat controller comes with overload protection and is ETL listed. It is also rated 120VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5

• IDEAL TEMP CONTROL - Improve propagation rates by maintaining root zone temperatures between 40-108°F (5-42°C); Provide constant optimum temperatures for specific plants and controls temperature in colder or warmer environments
• COMPACT CONSTRUCTION - High-quality plastic housing with a protective film on front panel with ample durability ensures it will not rust or malfunction under tough conditions; Suction cup on the power cord helps to fix the sensor probe to the target
• LED INDICATOR - Included illuminated LED screen display is easy to read and the program will help you to keep in mind the current temperature and read in even dark environments; Easily switch between Celsius and Fahrenheit to meet your needs
• EASY SET-UP - Simply plug the mat into the thermostat then place the temperature probe at the desired location; The 3 sensitive buttons interface makes a smooth operation and can easily be calibrated; Compatible with almost all heat mats
• SAFETY GUARANTEED - Heat mat can be safely plugged into an angled 3-end outlet socket that is UL certified, which also prevents cords from tangling and supports a 1000W power load; Equipped with a 5.8 ft-long power cord and a 6.4 ft-long probe cord, it is ideal for wherever you need to place

Product features

VIVOHOME Seedling Heat Mat Thermostat Controller

Use a heat mat regulator to help sprout your seeds in the temperature they prefer! Using a thermometer and automatic adjuster, the VIVOHOME Thermostat Controller will constantly ensure that seeds and sprouts are enjoying the ideal environment for growth. Just stick the sensor in the rooting area and watch your plants thrive.

Using The Controller

1. Press the SET button to display the current pre-set temperature. The thermostat's LED screen shows the current temperature whenever the SET is not activated.
2. Press and hold the SET button for 3s to enter temperature selection mode. Press the UP or DOWN button to adjust the temperature. The thermostat's LED screen shows the numbers as you cycle through them. Press the SET button again to set the chosen temperature. The HEATING light cycles on when the mat is in the process of heating. When the LED is not lit, the mat is not providing heat. The light turns off automatically when the mat reaches the pre-set temperature.
3. Pree and hold the DOWN button for 3s to display the temperature in Celsius. Press and hold the UP button to display the temperature in Fahrenheit.

Keep Your Plants Warm

The VIVOHOME Thermostat Controller allows you to program the temperature of your plants’ rooting area increase survival rates of seedlings and cuttings. For use under propagation trays and small plant pots, the Thermostat Controller will help your plants grow faster, more healthily, and increase yield at maturity. Research what temperature to give your plants online!

Give Fish A Comfortable Temperature

The Thermostat Controller can also be used in fish tanks in conjunction with a water heating element. Just set the sensor in circulating water and set to your fish’s natural habitat temperature range.

Let Reptiles Enjoy Constant Warmth

The VIVOHOME Thermostat Controller is compatible with most heat mats. To make sure your reptiles are warm and happy, use the controller to set a temperature within the range of their natural habitat.

Product description

This package has 1 pack heat pad and 1 pack thermostat. Use in combination can bring a stable and appropriate temperature for your reptile terrarium.



Product Features:

1.The reptile heat pad is specifically designed to be used on standard glass terrarium for reptiles, amphibian, small animals, such as turtles, snakes, lizards, spider, crawler, etc.

2.Compare with other general heat pad in current market, our heat pad has a new heating film which inserted in it, providing the suitable temperature equably in several minutes.

3.Our power heaters range from 4 to 24 watts making them extremely economical in operate. Use with the thermostat makes better results.

4.3M adhesive paper provides a strong grip to the contact area. The heat mat stays exactly where you want it, easy to clean and convenient to use.

5.Waterproof and moisture proof design, the use environment is more diverse. Waterproof design that enables safe scrubbing, but please do not put the heating pad in water.

6. Keep reptile tank warm without any harm to your pets. Make a warm and comfortable growth environment for your reptile even in cold winter.

7. Convenient LED heating and power indicator light allows you to check the status of the controller even in complete darkness.



Product Specifications:

1. The heat pad: size: 8"x12”; power: 16W; length of cord: 6fts, 120V US voltage and standard plug and no adapter needed.

2. The thermostat: 120V US voltage/ 60HZ, Max Loading:8.3A, 1000W, LED indicator light and three-hole grounding plug are easy to operate.

3. At room temperature 68℉ (20°C), the surface temperature of the heat pad is about 80°F (26. 7°C). This result is measured under experimental conditions, and the actual data will be slightly different.



NOTE:

1. Do not immerse the digital controller or thermostatic sensor probe in liquid or very wet soil.

2. Abnormal warning: If the thermostat displays "E1", it means the actual temperature is below 0°C or 32℉. If the thermostat displays "E2", it means the actual temperature is higher than 60°C or 108℉. If the thermostat displays "E3", it means the temperature sensor is not working properly, please reinstall the sensor.

3. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature.

4. Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don't exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature.

• Improve design: new PTC heating material and insulation increases overall heat transfer uniformly across the mat. Reach desired temperatures within minutes.
• Excellent protective performance: Heat pad has waterproof and moisture-proof design, makes the use environment more diverse, and enables safe scrubbing, but please do not put the heating pad in water.
• Temperature range: Digital thermostat provides temperature control between 40-108 ℉ (5-42℃). Temperature display range: 32-140℉ (0-60℃).
• Operating instructions: The operation is simple, with only three buttons, you can easily switch the temperature or the unit of measurement you need. For detailed operation, please refer to the product description.
• Package includes: 1 pack digital thermostat (rated voltage: 120V, max loading: 8.3A,1000W), 1 pack Heat pad (size: 8"x12"; 16Watts; Length of cord: 6fts; voltage and standard plug and No adapter needed. Apply to 30-40 gallon).

• Plug and play design, choose the heating or cooling mode easily. Maximum output load: 880W(110V)
• Easy to use LCD display help program quickly, support Fahrenheit and Celsius display, 0.1 degree temperature adjustment
• Waterproof and accuracy sensor allow it to work in 20%-85% operating ambient humidity with no condensate situation
• Compressor delay available for refrigerator, automatically calculate after the moment refrigeration stops, protect your refrigerator from cycling too fast
• All purposes in one machine, ideal used for multiple occasions like aquarium, reptile, greenhouse, brewing and incubation, ect

User questions & answers

Question:	does it work for saltwater tanks
Answer:	The sensor looks as though it is waterproof but I can't be certain.
Question:	Can I control 2 heat sources with this unit
Answer:	No, not independently. There is only one relay inside controlled by only one micro-controller. The internal relay is 10A (standard) or 16A (optional). You can put two heat sources on the relay output if you ensure you don't exceed the current limitation of the relay that you have.
Question:	Is there any metal exposed on the temperature probe
Answer:	No. It appears to be encased in plastic.
Question:	What are the length of the power cable? and the sensor cable
Answer:	Both the power cable and the sensor cable are three (3) feet long.

Product features

NICREW Temperature Controller

NICREW temperature controller is easy to use. It can be used as over-temperature protection and automatic temperature control system for various electric appliances. Delay protection system is available for protecting cooling equipment cycling too fast. Celsius and Fahrenheit display can be suitable for different reading habits.

LCD Display

LCD shows corresponding lead language, numerical value and icon while you operate the unit step by step. Great help in quick and easy setting according to the LCD display. Fahrenheit and Celsius display can be changed.

Waterproof Sensor

When measuring the temperature, please place the probe completely in the appliance for accurate test while the display is mounted on the outside. In this way, you can easily read the temperature without getting hand wet.

Heating/Cooling Socket

One socket can used for heating or cooling equipment. Heating/cooling differential function could be set for refrigeration or heating to protect temperature controller from violent change. Delay protection is available.