12 best hydraulic pool covers

Product description

Top of the line, professional grade Hot Tub/Spa Cover lifter that fits any size spa 6ft-8ft. Works with ROUND, OVAL, RECTANGLE and SQUARE shaped spas/spa covers. Designed to fit any hot tub/spa height 26" to 39". Requires 22" of clearance for spa cover storage.

• NO TOOLS REQUIRED! Comes Pre-Assembled and takes less then 5 mins to install
• Fits hot tub/spa 6'-8'Ft of any shape
• Industrial grade footplate provides stability and strength
• Adjustable spa cover arms designed to handle any spa cover up to 4 inches thick
• Heavy duty hydraulic piston makes removing and applying spa cover effortless

User questions & answers

Question:	Is the 4 inch thickness mentioned in the description the max folded thickness or the thickness of the cover before it is folded for storage
Answer:	Before. It fits a standard hot tub cover with room to spare. It’s adjustable anyway.
Question:	Will it work with a 5 ft wide cover
Answer:	Yes
Question:	My spa sits on a slab of concrete we layed to level out an existing patio. How much room on the slab does the base of the rack need
Answer:	None. Slides under about a foot.
Question:	how much room does rack need to work. We have 2 feet before fence
Answer:	The CoverMaster Pro requires 22" of clearance to store the cover.

Product description

Overview: Lifting your spa cover has never been easier than with the Cover Valet: the world’s leading spa cover lift. The Cover Valet has a low profile and is designed to fit almost any spa and any back yard environment, including inside gazebos, recessed in decks, or up against a wall. This cover lifter has high quality dual gas locking shocks that make opening and closing a spa cover effortless. All you need is 6” of clearance behind the spa for this lifter to work. The powder coat finish and stainless steel hardware on the Cover Valet make this lifter long lasting and durable. Features: Requires 6” of clearance behind your spa. Fits almost anywhere: inside gazebos and recessed in decks. Mounts to edge of spa cabinet or directly to deck. Provides a privacy wall when cover is open Zinc plated powder coated finish Stainless steel hardware Dual gas shocks for an effortless lift 5 year manufacturer’s warranty Free shipping and handling Considerations: This spa lift is not compatible with round, hexagon, or octagon spa cabinets. Clearance Required: Behind the spa: 6” Side of the spa: 0” (top mount) Side of the spa: 3” (side mount) If your cover hinge measures over 90” in width, your cover would require the large Cover Valet. Be sure to choose the correct size from the options at no additional charge. Covers with an extra large radius over 13” require the Maxxus Bracket kit. This kit is compatible with covers with a radius up to 20”. ?How to measure my corner radius. Non-warranty returns on cover lifts are subject to a $20 restocking fee. Warranty: 5 year limited warranty

User questions & answers

Question:	my hot tub is new and it is composite wood.. not real wood is this cover lifter ok to attach
Answer:	Yes - I attached to a MasterSpa, and its sides are made of very thick plastic. The brackets are large and have enough fasteners to spread the stress and not break the siding of the hot tub IMO. Good product, highly recommend.
Question:	With this unit, does the cross bar from one side to the other go all the way across to the other side? To keep the cover from twisting
Answer:	They lower bars extend approximately 15 inches under the hinged portion of cover, and are backed up by bars that fit snugly against the top of hinge, not allowing for any twisting . I am thoroughly satisfied with the product.
Question:	will this lif work with an aluminum cover
Answer:	This lifter is made for vinyl/polystyrene spa covers
Question:	My tub is a square 91X91 inches. Is this cover lift too small
Answer:	Fits spa with up to a 12" radius corner.

Product description

The UltraLift Hydraulic offers all the same features as the standard mount model with the addition of dual gas pistons to provide easier cover removal and replacement. For max lift assistance the Top Mount & Deck Mount options are recommended. The unique combination of aluminum and high strength galvanized steel with corrosion resistant power coating, provides years of reliable worry-free service.

• Dual gas postons provide easier cover removal.
• Fits Radius up to 16"
• Fits Spas up to 109"
• Requires 12" to 14" of clearance behind the spa.
• 2 Mounting Options - Top Mount or Deck Mount

User questions & answers

Question:	When mounting on a flush deck, how far away from the hot tub wall does the bracket have to be? Also, how far below the top of the hot tub can it be
Answer:	I mounted on side of tub as in the pic. Sorry
Question:	do you need 6" clearance on both sides or just one? i have about 15" on the back but the sides are tight
Answer:	about 3 inches on each side just for the mounting bolts.
Question:	Can this be opened with one hand? I have a bad back and cannot lift
Answer:	you need TWO HANDS..
Question:	What is the warranty
Answer:	I asked the seller via email, and I was told there was a 5-yr warranty from the manufacturer.

Product description

Hot Tub Replacement Part CoverMate III Hydraulic Spa Cover Lift HTCPCMlll-PLAST / CMlll-PLAST. Ideal for when clearance behind the spa is limited, this hydraulic lift utilizes an exclusive wind lock system that virtually eliminates broken shock syndrome. This is for one CoverMate III Hydraulic Spa Cover Lift Higher perceived value. Trouble-free performance.. Requires just 6 inches of clearance behind the spa and 5 inches on each side Powder-coated, aluminum tubing with easy-to-install, non-corrosive mounting brackets Euro-styled composite brackets with beauty covers that hide mounting hardware for a clean look Ergonomically designed for ease of use Comes standard with a TowelMate accessory for hanging up to three towels right where they are needed most

• High Quality that's made to last!!!

User questions & answers

Question:	Can I mount this to the deck instead of the side? The spa is level with the deck
Answer:	side mount only

Product description

Increase the convenience of using your hot tub! This cover lifter makes taking your spa cover on and off a breeze. We supply the highest quality hydraulic cover lifter at the best price on the market.

• Convenient under mount design works with all spas and hot tubs
• Installs in minutes with no drilling.
• Hydraulic lift makes taking off and putting on the spa cover effortless
• Safe and convenient storage. Made with high quality powder coated aluminum
• Product Note: Best fit for square and rectangle spa covers up to 96”. irregular size and shape hot tubs may not be applicable with universal spa lifters. Must have access to underside of hot tub for under mount design to operate and have 18” of clearance behind the hot tub. Is not applicable for sunken or inground spas. Please contact us with any questions about installation.

User questions & answers

Question:	Is this suotable for an inflatable spa
Answer:	Robin, I have had four different cover caddies, lifts, etc. This one has been the best ever!! I strongly suggest it be secured to the upper area of the spa frame if the spa cover is Big and heavy like mine (7 seat tub). You may have a problem being that your tub is inflatable. But, the weight of the filled tub holds the rack in place, so the “FOOT” has to have a suitable ‘wedge effect’ where you slide it under the bottom of your tub. Good luck. Larry Ward (will re-order!!!)
Question:	Does the spa have to be lifted for the lifter to slide under
Answer:	Yes to get it under far enough. Two men can lift and then set the lifter in the middle area and your good to go.
Question:	Does this product normally come with a full set of instructions? I received my order and all the parts were there, but no instructions
Answer:	yes. The instructions were 4 pages. Page 1 was the parts list.
Question:	Will it work on a 6ft high swim spa master spa H2X
Answer:	New undermount-cabinet design works with all spas. Gas spring assisted for effortless spa cover removal. Stores cover conveniently to the side of your spa. Adjustable – raises or lowers spa cover when stored. Constructed of high-grade powder coated aluminum. Complete installation within minutes. Requires 32" to 42" of clearance. XL spacers included for spa covers with 6? – 4? tapers. Works with spas from 30? to 40? in height It’s unique design allows for installation on an array of spa shapes and sizes including round, octagonal, and spas with large radius or cut corners.

Product description

The UltraLift Under Mount brackets eliminate the need to drill holes in your spa cabinet or your deck. The UltraLift Under Mount lift is a unique combination of aluminum and high strength steel with corrosion resistant powder coating, provides years of reliable worry-free service.

• Under Mount Spa Brackets
• Fits Spas up to 109"
• Fits Radius up to 16"
• Requires 16" of clearance behind the spa.

User questions & answers

Question:	Will this work with a round spa
Answer:	No
Question:	Will this work on a small spa that is only 60 inches wide
Answer:	Yes I believe it will
Question:	What's the smallest width spa this will work on
Answer:	don't know sorry
Question:	The price indicated above-does it also include a cover or is it just the lift
Answer:	Just the lift

Product description

Spa Cover Caddy's unique design allows this premium cover lifter to be installed on a number of spa shapes and sizes, including square, rectangular, round & octagonal. The caddy under-mount base provides for easy installation within minutes. Since it isn't screwed into your spa cabinet, it can easily remove heavy spa covers without damaging your spa. The powerful gas spring makes lifting & lowering your spa cover easier than you ever imagined. Cover Caddy requires 36" of clearance in order to work effectively; will fit all spa cover widths. Adjustable height from 30 in. up to 40 in. depending on height of spa. 5-Year Warranty.

• Under-mount cabinet design works with all spas
• Gas spring assisted for effortless spa cover removal
• Stores cover conveniently to the side of your spa. Works with spas from 30 to 40 Inch in height
• Adjustable – raises or lowers spa cover when stored
• Constructed of high-grade powder coated aluminum

User questions & answers

Question:	will this cover fit THE spring dance envoy hot tub
Answer:	This would be a great lifter for spa as your model shows as being square however it also works for round spas. There would be no holes drilled into the cabinet for install leaving your cabinet looking new. Do not forget it is best to put this lifter on when the spa is empty to get the under bracket under the spa. Patio Splash
Question:	What is the maximum height that this will work with? My Spa is 46" tall
Answer:	Works on spas 30" to 40" there is a conversion kit for spas 41" to 55" tall and Swim Spas. Patio Splash
Question:	What is the size on the cover
Answer:	Hi, this will fit a cover that is 5" thick and up to 100" in length. If you have a 6" thick cover you would need to get a extended bar to accomidate the extra thickness. Thanks
Question:	This undermount-cabinet design has me intrigued. Does it just slip underneath a filled, functioning hot tub
Answer:	I was able to slip it under our full spa without draining. Maybe because the concrete surface wasn't completely flat underneath. I would definitely try to slide under before draining. Draining is not a big deal though with the use of a sump pump. Should be drained once or twice a year anyway.
Question:	how does it connect to spa, with the lack of support behind the panels
Answer:	You have to screw them in to the side of the spa.
Question:	What material are these lifters made of? Plastic? Metal? I don't see this important information in the details
Answer:	Heavy thick plastic. I love mine it works great and you dont have to lift it all the way up like others. This is my second one my old house had one also with that hot tub. I tried the easy lift and it ended up bending over Tim plus I have a bad shoulder so lifting it up was difficult
Question:	what is the length of the bars
Answer:	from the mounting surface, to the end of bars is 32 1/2"s , there is a 1 3/4" offset that is 6 inches deep from the top of the bars at the mounting surface that allows for any protrusions around the upper edge, of the tub. hope this helps. Bill
Question:	Is there a special way to install on a round hot tub
Answer:	Its simple, just set the brackets as shown in the instructions and drive in the screws they send with the brackets. Took about 10 minutes.

Product features

Cover Valet NP509 Spa Cover Lift and Caddy

The Cover Caddy gas spring assisted cover lift defines versatility and effortless spa cover removal. It’s unique design allows for installation on an array of spa shapes and sizes including round, octagonal, and spas with large radius or cut corners. The Caddy’s new under-mount base plate provides for a complete installation within minutes. The addition of a powerful gas spring makes lifting and lowering your spa cover easier than you ever imagined.

Features:

• New undermount-cabinet design works with all spas.
• Gas spring assisted for effortless spa cover removal.
• Stores cover conveniently to the side of your spa.
• Adjustable – raises or lowers spa cover when stored.
• Constructed of high-grade powder coated aluminum.
• Complete installation within minutes

Product description

There are a number of different brands of cover lifts on the market today. We have tested them all & found some to be made of flimsy metal or tubular aluminum. Some of them require a lot of strength on the part of the user & others actually bend over time. The cover valet is different! this is the Cadillac of spa cover lifters. The cover valet is the world's leading premium spa cover removal system. It is designed to fit in almost any back yard environment; inside of a gazebo, against a wall, or even mounted into an existing deck. Dual gas springs assist in effortlessly lifting & lowering the spa cover. A locking safety feature holds the cover open until it is time to be closed. A durable powder coat finish accompanied by stainless steel hardware allows the cover valet to be equipped with an industry leading 5 year warranty. Two heavy duty zinc coated metal frames are attached to your portable spa cabinet or the decking next to your in ground spa. Pneumatic pistons assist you whenever it is time to open up your spa cover. The cover valet makes lifting your spa cover a breeze! Available for spas with or without wood rims. Easily installs in minutes. Made in the USA & built to last a lifetime.

• Requires only 4"-6" of clearance
• Gas shock assisted for effortless spa cover removal. One person cover removal
• Mounts to edge of spa cabinet or directly to deck
• Fits spa covers up to 8 ft
• Features a five year limited manufacturer's warranty

User questions & answers

Question:	what is the difference between the CV 250 and CV
Answer:	I called the company and they recommended this model as I have an 8' by 8' cover which is heavier than the CV 250 is built to handle. The tubes that assist the closing and opening are heavier duty on the CV400. Installation is easy enough by following instructions and reading ahead a bit to know expectations.
Question:	I tried to purchase and you wont ship to Sydney Australia. Can you please advise the dimensions of the box and weight I may organise freight myself
Answer:	I would agree with Billdatum. those dimensions are very close to what I have. It was easy to install. took me about 1 hour. I did purchase larger screws to mount the bracket to my spa, and to utilize more holes as my brackets hung over the edge of my spa, and I was unable to use the last 2 holes on the bracket. There are 2 rows of holes offset, and pre drilled on each side of the bracket ( just a piece of angle iron ). I believe the kit comes with 5 screws to use on each bracket. As I mentioned I bought some about 1/2" longer and 1 size larger and enough to use 7 screws on each side. Worked great. I could fillthe spa with water, and use the brackets I mounted to use as lift points for a crane..
Question:	will this work on a 78" round spa
Answer:	yes, Cover Valet is the company name. Not sure if they make a lifter for a round spa, The contact info is 1 (800) 730-7727
Question:	Does the support bar go all the way across the cover at the seam when it's lifted? My spa is 8' wide
Answer:	No. There are 2 "fingers" on each side that allow the cover to be lifted without damaging the seam all the way across the hot tub cover.

Product description

Hot Tub Cover lifter Removal System / Spa Cover Lifter fits vary SIZE, SHAPE and BRAND of SPA,CABINET FREE COVER ONE SIZE REALLY FITS ALL! - the spa cover lifter that fits vary size, shape and brand of spa: square, rectangular, octagonal and angled corner spas, free standing, built-in or inground hot tubs and spas. our brackets attach the cover lifter directly to your spa floor and adjust to fit in small spaces. Remove and replace your spa cover , fold your cover over the lifter and let it do the lifting for you Easy To Use & Install - Completely Assembled - Only Needs A Screwdriver To Mount To Spa 4 Rollers On Each Arm Make It A "Snap" To Slide On & Off - Cover Maybe Used As A Table Top While In Open Position Requires 1/2 Width Of Spa Cover Behind Spa - Fits Square & Rectangle Spas Folds Snug Against Spa While Not In Use - Manufactured Using The Most Durable Weatherproof Materials

• Easy To Use & Install ,Direction for installing and using spa cover remover models as picture 6.
• Fits Vary Size, Shape and Brand of SPA,Cabinet Free Cover.
• Max load on hot tub cover lifter - 35kg. Folds neatly away when not in use .
• 4 Rollers On Each Arm(Easy-slide rollers), Simple installation.
• Made of High Quality Plastic and Durable Waterproof Material.

User questions & answers

Question:	how does it connect to spa, with the lack of support behind the panels
Answer:	It will come in other sizes next year.
Question:	What material are these lifters made of? Plastic? Metal? I don't see this important information in the details
Answer:	No this will not fit. The largest model is 95 inches square. Your tub and lifter is rectangular, so it won't fit.
Question:	what is the length of the bars
Answer:	Sorry, There are only two size available, 85x85 inch & 95x95 inch.
Question:	Is there a special way to install on a round hot tub
Answer:	It can be glued to the fabric. Thank you for your question. Have a nice shopping

Product description

Cover Valet - Cover Caddy - Hot Tub Spa Cover Lifter

• New undermount-cabinet design works with all spas. Nothing to attach to your spa cabinet.
• Gas spring assisted for effortless one person spa cover removal
• Complete installation within minutes.
• XL spacers included for spa covers with 6ö - 4ö tapers
• Features an industry leading five year MFG warranty

User questions & answers

Question:	how much clearance do you need against a wall or fence
Answer:	At least 2 feet.
Question:	What is return policy in this item
Answer:	No idea.
Question:	My tub height is 41”... will this caddy work
Answer:	Our hot tub is 37” tall and 40” with the lid. I believe that the lift has sufficient adjustment to accommodate the 41” hight. Hope that this is helpful.
Question:	I see many differing responses. how much room is actually needed between tub and wall, so that you can take the cover off and put it on side of tub
Answer:	A little more than half the size of your cover

Product description

The Cover Rock-It Under-spa plates are held securely in place by the weight of the spa (plates measure 8.75x8.75"), When folded down, the cover stores neatly on the side of spa to provide a full view. Depending on the spa setup the cover may require the spa to be emptied and lifted to install. Fits most spas up to 96 inches

• Under-spa plates are held securely in place by the weight of the spa (plates measure 8.75x8.75")
• Requires as little as 18" of clearance
• When folded down, the cover stores neatly on the side of spa to provide a full view
• Zinc-plated and powder coated finish
• Depending on the spa setup the cover may require the spa to be emptied and lifted to install

User questions & answers

Question:	will this fit a 5' (60") x 5' square hot tub
Answer:	Hi Brandy, the Rock-it fits most spas up to 96″ & will not work on round, hexagon or octagon spa cabinets or on hot tubs with a corner radius of more than 10"
Question:	I have about a 2" lip, including the shell under my full tub. Dont really want to drain it this time of year Will I be able to install this by myself
Answer:	The spa will need to be drained but besides that yes you can install the cover rock it. “Hot Tub Charlie”
Question:	How much of the cover sticks up above the top of the spa
Answer:	When the cover is in the open position, it sticks up about a foot - foot and a half above the spa. When I am in the water, I can't see anything on that side of the tub.
Question:	How to intallation rock it under spa cover lift on a full tub
Answer:	The plate that goes underneath is really thin and only about 3"long, so you just have to get something under a little. I got a little screwdriver under mine, then a bigger screwdriver, and finally a little pry bar, which was enough to squeeze it in there. This was on an 8' tub with 600 gallons in it.

Product description

Pumps Away 350 GPH Submersible Pool Winter Cover Pump. Submersible pump up to 350 gallons per hour. Manually on / off. Pump water to within 1/8 inch deep Unique pre-filter sponge pad to prevent leaves & debris from clogging the pump. Up to 25 feet power cord to assure flexible and comfortable use. Standard hose adapter for simple installation & quick setup. Oil-free designs for Environmental protection, Energy saving and Easy cleaning. One year warranty - UL listed

User questions & answers

Question:	What’s the weight of this pump
Answer:	Very light weight
Question:	Will the pump start automatically when fluid level reaches 1-1/2 inches deep? If not at what depht does it start automatically
Answer:	I would not recommend this pump. It worked for 1 day. The bottom fell off immediately and it was a pain in the ass to get started submerged in 1ft of water. I kept having to jar the hose and it would turn on then back off. I just dont feel like its worth it. I ended up getting a pump that I could control when it turned on or off.
Question:	At what depth does the pump start
Answer:	The pump starts pumping as soon as you plug it in. You have to make sure that at least the bottom of the pump is underwater so you don't burn out the motor. We used it this spring to get all the icky water off of the pool cover; the pump worked great. Made opening the pool much easier.
Question:	Standard plug outlet
Answer:	Yes. Standard 110v