14 best pentair pool lights

Product description

Pentair Intellibrite 5g automated color-changing pool and spa lights feature led technology is the wave of the future in energy efficiency; lifetime value; quality of light; and controllability. With intellibrite 5g; combinations of individual colored led's are mixed and matched to achieve a vibrant spectrum of colors. These combinations are power sequenced to illuminate and cycle through colors at varying speeds; and in different sequences of color. Combined with a custom reflector and unique lens design; the intellibrite 5g offers super efficiency while being the brightest yet most energy efficient underwater led light available. In addition, Pentair’s Intellibrite Automated Controller is recommended for use with the Intellibrite color lights to allow light colors to automatically rotate.

• A superior reflector design assures more light directed toward the pool bottom to further increase intensity and color effects;while minimizing glare
• Superior lens geometry distributes light in an optimum way to avoid “hot spots” on the pool bottom;light intensity and color are distributed more uniformly throughout your pool
• Lens can be rotated to 180-degree to provide wide beam pattern or narrow beam pattern. Wattage: 26 watts
• IntelliBrite technology makes use of the brightest LEDs available in underwater pool and spa lights - Up to 50-precent less energy comsumption than competitor lights

User questions & answers

Question:	can you cut a 100 foot cord to length...say 60ft
Answer:	Yes. The cord can be cut to fit. Note, you need to leave enough cord so that the light can be pulled on to the deck for servicing.
Question:	We purchased this light last summer and we just opened our pool. The color stays constantly on green, even though it worked last summer. Anyone else
Answer:	Hi.. maybe the problem is with the selecting mode. I Added this information, but you should look the installation manual for this lamp.Selecting a light show mode or fixed colorSwitch power on to the light. A white light will momentarily illuminate, followed by the previously selected color. To selecta color show mode (1-7) or fixed color (8-12), turn the wall switch off/on a specific number of times. Each number (1-12)shown below corresponds to the number of times to power-cycle the switch to activate a color light show or fixed color.For details about saving color effects while in "show" modes, see "Hold" and "Recall" feature on page 2.1. SAm® Mode: Cycles through white, magenta, blue and green colors (emulates the Pentair SAm® light).2. Party Mode: Rapid color changing building energy and excitement.3. Romance Mode: Slow color transitions creating a mesmerizing and calming effect.4. Caribbean Mode: Transitions between a variety of blues and greens.5. American Mode: Patriotic red, white and blue transition.6. California Sunset Mode: Dramatic transitions of orange, red and magenta tones.7. Royal Mode: Richer, deeper color tones.8. Blue: Fixed color.9. Green: Fixed color.10. Red: Fixed color.11. White: Fixed color.12. Magenta: Fixed color.13. Hold: Save the current color effect during a color light show.14. Recall: Activate the last saved color effect.Example: To select California Sunset Mode; turn the switch off and on six successive times.
Question:	What is the difference between the pool an spa lights? They're both advertised as underwater lights
Answer:	They are different sizes. Spa light is smaller than the pool light
Question:	what are the replacement bulbs for this model if this burns out
Answer:	No replacement light bulbs. If it goes out, you're looking at a new light; another $600. In comparison, my incandescent pool light went out after 15 years. A replacement bulb and lens gasket cost me around $40. In my opinion, the power savings don't add up when you take into account the initial higher cost. That leaves the color changing feature, and to me, having the pool illuminated in green or red is not that attractive. If you want color, buy some battery powered submersible puck lights. Here is a 10-pack for about $20: https://www.amazon.com/Submersible-LUXJET-Waterproof-Controlled-Centerpiece/dp/B07MR5G7YJ

Product features

IntelliBrite 5G Underwater LED Lights

IntelliBrite 5g Color-Changing Underwater LED Lights feature LED technology—the wave of the future in energy efficiency, lifetime value, quality of light and the ability to control it. With IntelliBrite 5g lights, combinations of individual colored LED lights are mixed and matched to achieve a vibrant spectrum of colors. These combinations are power sequenced to illuminate and cycle through colors at varying speeds and in different sequences of color. With its custom reflector and innovative lens design, the IntelliBrite 5g light is the most efficient underwater LED light available.

The result is a virtually endless range of dramatic underwater lighting effects at your command. Poolside nights go from great to spectacular.

No Other LED Light Offers The Efficiency Or Freedom Of The IntelliBrite 5G Light

Pentair Engineers have raced past competing LED lights in a number of ways.

Product description

This face ring assembly is designed to use with Pentair IntelliBrite White LED pool light. Made of stainless steel.

• Brand: Pentair
• Face ring assembly replacement
• Made of stainless steel
• Face ring assembly replacement

User questions & answers

Question:	The package dimensions are listed, but what is the product's outer diameter
Answer:	This faceplate works on all hayward /Amerilite pool light assemblies
Question:	Can this replace the face and clamp for the 005011 lamp
Answer:	Yes, this does replace face and clamp. It does not replace the glass lens. Bright and shiny new steel!
Question:	Can this work on a pentair 640122 light
Answer:	It Did work on my very old face ring.
Question:	Does this come with the brass screw
Answer:	Yes , you did not ask but I tried to use this on an older style light which used screws to clamp the cover and housing together. This unit uses the wire ring with a clinching screw as shown. It can be retrofitted and should work but I found I could not obtain a good seal and ended up buying an entire new light assembly.

Product description

This white incandescent pool light has been a long standing standard for pool lights and is the world standard of reliability for underwater lights. It features a stainless steel shell 8-3/8-inch prismatic tempered glass lens and stainless steel face ring with uni-tension clamp. Amerlites are UL listed to install in full-sized Pentair pool products. Gold diffused low water cutoff. Comes with medium blue lenses and 50-feet cord length; 500-Watt, 120-Volt. Measures 12-inch length by 11-inch height by 12-inch width. All 120-V pool and spa lights must be connected to a branch circuit protected by a ground fault circuit interrupter (GFCI)

• Stainless steel face ring with uni-tension clamp
• Superior light diffusion
• Gold diffused low water cutoff
• Prismatic tempered lens; 500-Watt, 120-Volt
• 50-feet cord length; measures 12-inch length by 11-inch height by 12-inch width

User questions & answers

Question:	Are these lights dimmable
Answer:	Yes, you could use these with a dimmer as long as your using a traditional filament bulb no LEDS or florensents. I would do it if I had a need but dont. Now standard disclaimer because there is some internal circuitry which I do not have the schematics to this woUld be best answered by the MFG.
Question:	Could I use this light without installing it in the wall? I just want to drop it off the side
Answer:	For any product costing over $100 or so, I tend to research carefully and look at all angles to insure I am getting the correct product. One reason I can think of for pool lights to cost so much more than an ordinary light (like by a factor of 10) is liability. We are talking about putting electrical components in water and then telling people to jump in the water and splash around. Hence, pool lights have to be over built to eliminate ANY possibility of electricity leaks into the water with its potential for electrocution. Not a small concern to be sure. That means that if you are using any electrical component in a manner other than designed you are introducing unknown risks to the system. These could go from a simple matter like having it not last as long as designed to the danger of electrocution. It really makes sense to use this the way their engineers designed it to be used. I am currently researching 12 volt lights as this greatly reduces the hazard even if there is a malfunction. There is a 12 volt lamp available but the transformer is installed in the niche behind the light. That means you are still running a 1120 volt line into the water. I am looking into something where the transformer is at the outlet and completely eliminating 1120 volts of electricity in the ater.
Question:	Is it going with a specific niche for Inground pools
Answer:	If you have an Pentair Amerlite niche sized for this unit it will install correctly. I don't know what niche brand you have. FYI see my review on the product page. By the way the manufacturer's warranty period is 60 days, but you can purchase extended warranty from Pentair. One reviewer received 2 units with the bulbs broken and sent one back in exchange and changed bulbs with the other one. I don't consider the unit a great price, but there are very few choices of pool lights on the market. Thus, limited supply means high prices. Typical manufacturing costs are marked up 300% for a final retail price. It is worth more like $60 to me.
Question:	Is the 500 watt lamp included? Will it be already clamped with the seal or do I have to assemble tighten clamp down
Answer:	It comes assembled with the 500 watt lamp included. However the lamp was broken in the 2 I received... First one I sent back, the 2nd one I opened up and replaced the bulb, reassembled and installed. It worked fine once I installed it.

Product features

Pentair Amerlite Underwater Incandescent Pool Light with Stainless Steel Face Ring

Amerlite, the standard of reliability for underwater lights, features a stainless-steel shell, a 8.375-in. prismatic tempered glass lens and a stainless-steel face ring with uni-tension clamp. Amerlite systems are to install in full-sized Pentair, American, PacFab and Purex niches.

Product description

Pentair 602054 Water Pool and Spa Globrite, 12V, 50 ft

• 5 brilliant fixed colors; 7 dazzling preprogrammed light shows
• The perfect complement to IntelliBrite 5g LED Pool Lighting for dynamic, synchronized colored light shows
• Make your pool more exciting; energy efficient; convenient and more fun
• Compatible with IntelliTouch and EasyTouch Control Systems
• Can be used with an optional IntelliBrite Controller

User questions & answers

Question:	Are this color changing
Answer:	Follow this link for more information. Need transformer and controller for color change features. https://www.pentairpool.com/en/products/lighting/globrite%20pool%20and%20spa%20led%20lights
Question:	Where can I find the installation instructions
Answer:	The instructions come with the light.
Question:	Do you have exactly the same light with 100 ft cord
Answer:	Buy the shortest cord, then install a junction box and do your spice in the junction box. 100' is a long pull and can get hard to pull over time. A 20' pull is easier.
Question:	What is the recommended depth to install these lights
Answer:	Not sure what’s recommended but mine are two-three & four feet deep. My first set lasted about 2 years I’m on the 2 nd set. They don’t seem to burn out but develop leaks that short the power out. Sooo probably the shallower the better.

Product description

At 18-Watt, the new Intellibrite 5g Color Spa lights provide the most energy-efficient lighting ever. With IntelliBrite 5g Color Spa lights, combinations of individual colored LED's are mixed and matched to achieve a vibrant spectrum of colors. These combinations are power sequenced to illuminate and cycle through colors at varying speeds, and in different sequences of color. With its custom reflector and unique lens design, the IntelliBrite 5g light is the brightest and most efficient underwater spa light available. In addition, Pentair’s Intellibrite Automated Controller is recommended for use with the Intellibrite color lights to allow light colors to automatically rotate.

• Intellibrite 5g technology makes use of the brightest led's available
• A superior reflector design assures more light is evenly spread throughout the spa to further increase intensity and color effects, while minimizing glare
• Works with intellitouch or easytouch control systems, which automates pool and spa equipment and transfers programming and control of intellibrite to a central system that controls all other pool features
• Pool lens can be rotated to 180° to provide wide beam pattern (standard) or narrow beam pattern
• Consumes up to 50% less energy than competitors’ lights

User questions & answers

Question:	what power supply is required
Answer:	Most pools have a transformer near the pool pump whose 120vac controlled by the house wall switch provides power to the externally mounted 12vdc power supply. Like your car battery 12 volts, the human body impedance does not allow 12 vdc to produce enough current to ever be dangerous, therefore 12 vdc is inherently safe in the pool.
Question:	How can I determine existing cable length without pulling them out? Need to replace and don't want to waste $ on a longer wire than necessary. Label
Answer:	I pulled the old one out first. I would always get the longer wire to avoid buying a short one and have to call the electrician again.
Question:	How many colors
Answer:	5 colors
Question:	we need to buy a separate control system to change the colors? tsk
Answer:	You don't have to have a separate controller but it would be recommended Without a controller you would have to switch the power off and on a specified number of times to change colors or color modes. Note that his light is 12v and will need a 12v transformer.

Product description

There’s no easier or safer way to illuminate your pool than with the Pentair AquaLuminator light and water return. Our Hydro-Optic technology creates this revolutionary light and return fitting combination. This light fits the existing water return hole pre-punched by most aboveground pool manufacturers and can be installed on new or millions of existing pools. It installs in minutes into your pool’s existing water return hole to brilliantly illuminate water and make evening swims a more beautiful and satisfying experience. The water return and light fixture are combined in a single, integrated and highly efficient unit. There’s no need to cut new holes and risk violating your pool manufacturer’s warranty.

• Light and return fitting, 25-inch plug-in cord
• Deluxe retail packaging, fits most aboveground pools
• Pressure cleaner adapter is not included with this item
• Fountain attachment available; hard plumbing adapter
• Measures 8-1/2-inch length by 7-1/2-inch height by 8-1/2-inch width

User questions & answers

Question:	does the hard plumbing adapter come with this
Answer:	Not sure what you mean by plumbing adapter is.
Question:	Can I use this with a Copper Ionization system
Answer:	I don't see why not. The light and housing is all made with plastic, so there is no water that can come in contact with the electrical parts. Copper ionization is less dangerous than chlorine! The light works great. Mine lasted for 15 years, except a bulb change once in that time. I just bought a new light and transformer since I have relined the pool and replaced pump, filter, and skimmer. I wanted all new gaskets for all of the openings so I do not need to mess with it for another 15 years! I left the transformer out all year, but this time, I mounted it so I can bring that portion inside for the winter. By the way, the old light and transformer still work!
Question:	Is it possible to use Aqualuminator and also connect with an Aqua Trol salt cell? I have the RJ (return jet) version & need to use same return hole
Answer:	I've been using both of those together for quite a few years, no problem (other than the light bulb doesn't work - unrelated). Currently trying to find a better lighting option, like LED.
Question:	Does it come with bulb
Answer:	Yes - The Bulb is included. This is a very good product - A little difficult to install the first time but worth it!

Product features

Pentair Convertible AquaLuminator Aboveground Light and Water Return

Product description

Pentair 640141 IntelliBrite 5G White Underwater LED Spa Light, 120 Volt, 50 Foot Cord

• Intellibrite 5g technology makes use of the brightest led's available
• A superior reflector design assures more light is evenly spread throughout the spa to further increase intensity while minimizing glare
• Works with intellitouch or easytouch control systems, which automates pool and spa equipment and transfers programming and control of intellibrite to a central system that controls all other pool features
• 100-Watt equivalent, Cord Length (Ft.):50. Pool lens can be rotated to 180° to provide wide beam pattern (standard) or narrow beam pattern
• To ensure proper grounding/bonding connections install only Pentair Water Pool and Spa lights in Pentair, Water Pool and Spa, Pentair Pool Products, American Products, Purex or Pac Fab niches only. Note- All 120-V pool and spa lights must be connected to a branch circuit

User questions & answers

Question:	Will it come with a gasket as well
Answer:	It is a wet nitch fixture completely sealed no need for gasket. It is bright you will love it
Question:	Can I connect to the 120v cord I have presently? will it seal? or do I need to replace the whole cord. pulling new line 150 ft and very difficult
Answer:	Many times you wouldn't have to replace 150'. My pool light is about 75' from my electrical panel, however the pool light cord is only about 10' long. It goes from the light niche in the pool through wet/flooded conduit up to a junction box under my diving board. Then it is spliced to a different run of wire in dry underground conduit to the electrical panel. You may have a similar setup.
Question:	can i wire this directly to my existing spa (light) switch? One guy comments here you need a transformer in order to do this,anyone please clarify
Answer:	Transformer is for low voltage pool light (12 volt).
Question:	Can I use it in my pool to
Answer:	Yes, and it's a good product

Product description

At 18-Watt, the new Intellibrite 5g Color Spa lights provide the most energy-efficient lighting ever. With IntelliBrite 5g Color Spa lights, combinations of individual colored LED's are mixed and matched to achieve a vibrant spectrum of colors. These combinations are power sequenced to illuminate and cycle through colors at varying speeds, and in different sequences of color. With its custom reflector and unique lens design, the IntelliBrite 5g light is the brightest and most efficient underwater spa light available. In addition, Pentair’s Intellibrite Automated Controller is recommended for use with the Intellibrite color lights to allow light colors to automatically rotate.

• Intellibrite 5G Technology Makes Use Of The Brightest Led'S Available.Consumes Up To 50% Less Energy Than Competitors Lights
• A Superior Reflector Design Assures More Light Is Evenly Spread Throughout The Spa To Further Increase Intensity And Color Effects, While Minimizing Glare
• Works With Intellitouch Or Easytouch Control Systems, Which Automates Pool And Spa Equipment And Transfers Programming And Control Of Intellibrite To A Central System That Controls All Other Pool Features
• No Assembly Required

User questions & answers

Question:	do you accept paypal credit
Answer:	No.. but a third party out of state check will gladly be accepted.
Question:	Can you have just plain white light as well, or it is only color
Answer:	Yes, white is one of the colors. The colors are: blue, green, magenta, white, and red or select from 7 popular "color shows" that come preprogrammed into IntelliBrite. More information here: http://www.pentairpool.com/products/lighting-color-changing-intellibrite-5g-underwater-color-changing-led-pool-and-spa-lights-74.htm
Question:	Is this compatible with a Handy controller? I would like to replace a not so good working Jandy spa light
Answer:	When you state controller in your controller is spa light on / off yes it will work for that function. I have a Aquallink house controller with spa / pool lights on / off control. To change color you will need to cycle the on off to the correct number of cycles for the listed in user guide color. My spa light is a few years old I have a Pentair color selection control for the pool light but this did not work if you try to connect one of these color controller to only the spa light I think it is a issue with the load resistance. Not again you can control on or off from any controller and cycle on off on to the stated number of cycles for color selection. The Pentair color control opens and closes a power relay doing the selection of color as automatic. My pool light has the color control and the inside home power on off control.
Question:	Does the spa light kit come with a new lens gasket
Answer:	The unit comes complet. Ready to install

Product description

79101600Z79101600Z

User questions & answers

Question:	Will this fit an American Products series 7885xx 7845xx 7895xx R
Answer:	Don't know. Did not work for me. They would not take product back.
Question:	Is this gasket white or black? I am looking for 79101600Z Pentair 8 3/8" gasket. Thank you
Answer:	The original gasket is white. I was able to get a black replacement to work after several tries. Be patient and careful putting the assembly together to prevent leaks (no sealers allowed). I presume the white gasket would be easier to seal.
Question:	Is this gasket compatible with an american products series 7884,7844 or 7894? This is what is on the actually fixture itself
Answer:	I can't be positive, but if that is what is currently there, you should be fine. I used this to replace my old gasket. I have no idea what was there, as I didn't build the pool, but this worked for me.
Question:	what is the diameter of this gasket. Outside or inside
Answer:	This is not a simple gasket. It is grooved inside so that it fits around the outer rim of the light lens; thus seals both the lens and the lamp holder when installed. Sorry I don't know actual dimensions as it is presently installed underwater.

Product features

Pentair Lens Gasket Replacement Kit AmerLite Pool and Spa Light

Product description

Pentair 601301 IntelliBrite 5G White Underwater LED Pool Light, 120 Volt, 50 Foot Cord, 500 Watt Equivalent

• Intellibrite white underwater LED pool light
• Pool lens can be rotated to 180 degrees to provide wide beam pattern or narrow beam pattern
• Compatible with Pentair stainless steel and plastic niches. The power is 55 watts
• Energy efficient utilizing up to 85 percent less energy than comparable incandescent lights
• Available in 120 volt versions and cord length is 50-feet and 500W incandescent equivalencies; Measures 11-inch length by 9-inch height by 11-inch width
• For more information, refer manuals in product details section

User questions & answers

Question:	will this fit in a hayward niche
Answer:	We've only used this light in our Communities swimming pools, would not hazard a guess about using it for any other application.
Question:	What is the compatibility chart between the light and the fixture niche
Answer:	They fit well in our application. Had some work to do to remove the old rusted / corroded hardware for the existing fixture.
Question:	Does it come with a warranty
Answer:	Yes but it must be installed by a Certified Pentair Service Tech or the warranty is void. About $200.00 to install. A very nice light!
Question:	Does anyone know what gauge wire is used in the cable of this LED pool light? (or even the diameter of the sheathed cable
Answer:	It says 16AWG on the outside insulation. The diameter of the sheathed cable is about 3/8".

Product description

79104800 Brass Pilot Screw with Captive Gum Washer Replacement Pool and Spa Light

• Pilot screw replacement
• Fits Pentair IntelliBrite 5g white color LED pool and spa lights
• Also fits Pentair SAm Spectrum Amerlite, SAL Spectrum AquaLight, AmerQuartz, SpaBrite, HiLite, SunBrite II/SunGlow II pool and spa lights
• Includes captive gum washer

User questions & answers

Question:	To reassemble a pool light Do you use any sealer on the gasket for pool light
Answer:	Definitely no! The rubber gasket should seal the housing from water intrusion by tightening the clamp down. If you apply caulking or other sealer, you or the future owners will regret it if you have to change out the bulb.
Question:	How long is this screw
Answer:	The screw measures 1 5/16” long
Question:	What is the thread size on the screw
Answer:	I believe Mike is correct, I’m thinking it’s a 10 size screw and the threads are not coarse as a 20 thread nor super fine like a 32 thread. So it’s in the 18-24 class thread. I tried several different screws from my bins and none worked. The replacement went right in. Sorry, I’m not gonna go pull it out and measure it, its under water and the pool temp is in the 40’s. 🥶
Question:	Will this fit Pentair Aqua lite 79108600 or
Answer:	Yes, this fits the hole in the light niche that the Pentair Aqualite fits into.

Product description

This tempered lens is designed to use with Pentair Amerlite and AmerQuartz pool/spa lights. Available in clear color. Measures 20-1/2-inch length by 9-2/5-inch height by 8-3/8-inch diameter.

• Genuine Pentair brand replacement parts
• Color: Clear
• Diameter: 8-3/8"
• Used with the following Pentair Lights: Amerlite, Amerquartz

User questions & answers

Question:	Is the face ring comes with the lens a rubber gasket (o-ring on both inside and outside) so that I do not need to order OEM gasket
Answer:	The Pentair 79100100 is a lens only. Any gasket or face ring would be purchased separately. With over a dozen sellers of this item, Amazon's system has to filter through over a dozen submissions for things like product name, description, shipping weight, size, etc. Occasionally errors in listings happen when one seller's incorrect description is shown over a different seller's correct description. For example, a bullet point for this item currently says the lens measures 20-1/2-inches in length by 9-2/5-inch height by 8-3/8-inch diameter. Wha-what? This item is an 8-3/8" round tempered glass lens. My best advice is: if you have any doubts about what you are buying, contact the seller you wish to purchase from and get your questions answered before purchasing.
Question:	Can this lens be rotated to vertical or horizontal beam pattern
Answer:	I do not think so.
Question:	is this material resistant, especially to chlorine
Answer:	The one I ordered has been in the pool for 3 years and it’s still clear. So I would say yes to being chlorine resistant
Question:	Is the face ring included called o-ring or gasket to keep the water out
Answer:	No. The face ring is what will attach the lens to the light fixture. The gasket that is need is part number 79101600. If your existing gasket is not dried out you can use it.

Product description

Pentair 79206000 Sealing Ring Replacement Small Stainless Steel Niches

• This Sealing Ring Is Designed To Use With Pentair Small Stainless Steel Niches
• Sealing Ring Replacement
• Fits Pentair Small Stainless Steel Niches
• Country Of Origin: United States

User questions & answers

Question:	Can this ring be replaced be replaced from inside the empty pool, without having to dig up the outside
Answer:	Do you have a vinyl pool? Are you replacing the liner? I'm trying to remember how i put mine together last summer. I sort of messed mine up at this stage. I'm trying to remember if i put this inside the liner or outside. I think it goes outside the new liner and there is a gasket inside it screws into but i messed up because i didnt put the inner ring inside. So i left my vinyl liner uncut and did not install this yet fearing a leak. It was tricky finding instructions because it was an old setup. Are you replacing the liner? I didnt need to dig up anything outside.
Question:	Do the screws go all the way through a fiberglass pool wall? If so, do the screws need to be laced with silicone to prevent leaks
Answer:	No they don't.
Question:	Need measurements. Ssealing ring i need is 6 3/8 outside x 5 5/14 inside. Thx
Answer:	I measured with a standard tape measure so accuracy is limited. However, the ring I replaced (the newer one being in the hot tub) is about 6 7/16 outside X 5 1/4 inside. More importantly is that on any diameter two screw holes measure 6 13/16 center to center.

Product description

This kwik-change lens cover is designed to use with Pentair SunBrite II and SunGlow II lights and also compatible with Pentair Amerlite/AmerQuartz pool and spa lights. Available in blue color.

• Genuine Pentair brand replacement parts
• Kwik-Change Lens Cover Replacement
• Used with the following Pentair Lights: Amerlite, Amerquartz and Sunbrite II/Sunglow II
• Color: blue

User questions & answers

Question:	Does this make your pool look cobalt blue
Answer:	It didn’t change the color hardly at all
Question:	Does this one work with the Pentair Intellibrite 5G LED light (601101)? Pentair owns so many different light brand, it's confusing
Answer:	Yes it fit perfect, it’s not has dark of a blue that I hoped but much much better than before, especially for the money it’s a GREAT buy. Greg
Question:	is this 8-3/8 inch diameter
Answer:	Sorry, I no longer have it - I returned it because it simply would not stay attached to the lamp.
Question:	Will this go onto a light in a hot tub
Answer:	I used for pool.. I would think this light would be really bright in tub plus the heat from it .. Good luck